</para>
<sect1><title>Frame Buffer Memory</title>
-!Edrivers/video/fbmem.c
+!Edrivers/video/fbdev/fbmem.c
</sect1>
<!--
<sect1><title>Frame Buffer Console</title>
</sect1>
-->
<sect1><title>Frame Buffer Colormap</title>
-!Edrivers/video/fbcmap.c
+!Edrivers/video/fbdev/fbcmap.c
</sect1>
<!-- FIXME:
drivers/video/fbgen.c has no docs, which stuffs up the sgml. Comment
</sect1>
KAO -->
<sect1><title>Frame Buffer Video Mode Database</title>
-!Idrivers/video/modedb.c
-!Edrivers/video/modedb.c
+!Idrivers/video/fbdev/modedb.c
+!Edrivers/video/fbdev/modedb.c
</sect1>
<sect1><title>Frame Buffer Macintosh Video Mode Database</title>
-!Edrivers/video/macmodes.c
+!Edrivers/video/fbdev/macmodes.c
</sect1>
<sect1><title>Frame Buffer Fonts</title>
<para>
obj-$(CONFIG_CONNECTOR) += connector/
# i810fb and intelfb depend on char/agp/
-obj-$(CONFIG_FB_I810) += video/i810/
-obj-$(CONFIG_FB_INTEL) += video/intelfb/
+obj-$(CONFIG_FB_I810) += video/fbdev/i810/
+obj-$(CONFIG_FB_INTEL) += video/fbdev/intelfb/
obj-$(CONFIG_PARPORT) += parport/
obj-y += base/ block/ misc/ mfd/ nfc/
#ifndef _VB_DEF_
#define _VB_DEF_
-#include "../../video/sis/initdef.h"
+#include "../../video/fbdev/sis/initdef.h"
#define VB_XGI301C 0x0020 /* for 301C */
#ifndef _VB_STRUCT_
#define _VB_STRUCT_
-#include "../../video/sis/vstruct.h"
+#include "../../video/fbdev/sis/vstruct.h"
struct XGI_LVDSCRT1HDataStruct {
unsigned char Reg[8];
#define _VGATYPES_
#include <linux/fb.h> /* for struct fb_var_screeninfo for sis.h */
-#include "../../video/sis/vgatypes.h"
-#include "../../video/sis/sis.h" /* for LCD_TYPE */
+#include "../../video/fbdev/sis/vgatypes.h"
+#include "../../video/fbdev/sis/sis.h" /* for LCD_TYPE */
#ifndef XGI_VB_CHIP_TYPE
enum XGI_VB_CHIP_TYPE {
source "drivers/gpu/drm/Kconfig"
+source "drivers/video/fbdev/Kconfig"
+
+source "drivers/video/backlight/Kconfig"
+
config VGASTATE
tristate
default n
config HDMI
bool
-menuconfig FB
- tristate "Support for frame buffer devices"
- ---help---
- The frame buffer device provides an abstraction for the graphics
- hardware. It represents the frame buffer of some video hardware and
- allows application software to access the graphics hardware through
- a well-defined interface, so the software doesn't need to know
- anything about the low-level (hardware register) stuff.
-
- Frame buffer devices work identically across the different
- architectures supported by Linux and make the implementation of
- application programs easier and more portable; at this point, an X
- server exists which uses the frame buffer device exclusively.
- On several non-X86 architectures, the frame buffer device is the
- only way to use the graphics hardware.
-
- The device is accessed through special device nodes, usually located
- in the /dev directory, i.e. /dev/fb*.
-
- You need an utility program called fbset to make full use of frame
- buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
- and the Framebuffer-HOWTO at
- <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
- information.
-
- Say Y here and to the driver for your graphics board below if you
- are compiling a kernel for a non-x86 architecture.
-
- If you are compiling for the x86 architecture, you can say Y if you
- want to play with it, but it is not essential. Please note that
- running graphical applications that directly touch the hardware
- (e.g. an accelerated X server) and that are not frame buffer
- device-aware may cause unexpected results. If unsure, say N.
-
-config FIRMWARE_EDID
- bool "Enable firmware EDID"
- depends on FB
- default n
- ---help---
- This enables access to the EDID transferred from the firmware.
- On the i386, this is from the Video BIOS. Enable this if DDC/I2C
- transfers do not work for your driver and if you are using
- nvidiafb, i810fb or savagefb.
-
- In general, choosing Y for this option is safe. If you
- experience extremely long delays while booting before you get
- something on your display, try setting this to N. Matrox cards in
- combination with certain motherboards and monitors are known to
- suffer from this problem.
-
-config FB_DDC
- tristate
- depends on FB
- select I2C_ALGOBIT
- select I2C
- default n
-
-config FB_BOOT_VESA_SUPPORT
- bool
- depends on FB
- default n
- ---help---
- If true, at least one selected framebuffer driver can take advantage
- of VESA video modes set at an early boot stage via the vga= parameter.
-
-config FB_CFB_FILLRECT
- tristate
- depends on FB
- default n
- ---help---
- Include the cfb_fillrect function for generic software rectangle
- filling. This is used by drivers that don't provide their own
- (accelerated) version.
-
-config FB_CFB_COPYAREA
- tristate
- depends on FB
- default n
- ---help---
- Include the cfb_copyarea function for generic software area copying.
- This is used by drivers that don't provide their own (accelerated)
- version.
-
-config FB_CFB_IMAGEBLIT
- tristate
- depends on FB
- default n
- ---help---
- Include the cfb_imageblit function for generic software image
- blitting. This is used by drivers that don't provide their own
- (accelerated) version.
-
-config FB_CFB_REV_PIXELS_IN_BYTE
- bool
- depends on FB
- default n
- ---help---
- Allow generic frame-buffer functions to work on displays with 1, 2
- and 4 bits per pixel depths which has opposite order of pixels in
- byte order to bytes in long order.
-
-config FB_SYS_FILLRECT
- tristate
- depends on FB
- default n
- ---help---
- Include the sys_fillrect function for generic software rectangle
- filling. This is used by drivers that don't provide their own
- (accelerated) version and the framebuffer is in system RAM.
-
-config FB_SYS_COPYAREA
- tristate
- depends on FB
- default n
- ---help---
- Include the sys_copyarea function for generic software area copying.
- This is used by drivers that don't provide their own (accelerated)
- version and the framebuffer is in system RAM.
-
-config FB_SYS_IMAGEBLIT
- tristate
- depends on FB
- default n
- ---help---
- Include the sys_imageblit function for generic software image
- blitting. This is used by drivers that don't provide their own
- (accelerated) version and the framebuffer is in system RAM.
-
-menuconfig FB_FOREIGN_ENDIAN
- bool "Framebuffer foreign endianness support"
- depends on FB
- ---help---
- This menu will let you enable support for the framebuffers with
- non-native endianness (e.g. Little-Endian framebuffer on a
- Big-Endian machine). Most probably you don't have such hardware,
- so it's safe to say "n" here.
-
-choice
- prompt "Choice endianness support"
- depends on FB_FOREIGN_ENDIAN
-
-config FB_BOTH_ENDIAN
- bool "Support for Big- and Little-Endian framebuffers"
-
-config FB_BIG_ENDIAN
- bool "Support for Big-Endian framebuffers only"
-
-config FB_LITTLE_ENDIAN
- bool "Support for Little-Endian framebuffers only"
-
-endchoice
-
-config FB_SYS_FOPS
- tristate
- depends on FB
- default n
-
-config FB_DEFERRED_IO
- bool
- depends on FB
-
-config FB_HECUBA
- tristate
- depends on FB
- depends on FB_DEFERRED_IO
-
-config FB_SVGALIB
- tristate
- depends on FB
- default n
- ---help---
- Common utility functions useful to fbdev drivers of VGA-based
- cards.
-
-config FB_MACMODES
- tristate
- depends on FB
- default n
-
-config FB_BACKLIGHT
- bool
- depends on FB
- select BACKLIGHT_LCD_SUPPORT
- select BACKLIGHT_CLASS_DEVICE
- default n
-
-config FB_MODE_HELPERS
- bool "Enable Video Mode Handling Helpers"
- depends on FB
- default n
- ---help---
- This enables functions for handling video modes using the
- Generalized Timing Formula and the EDID parser. A few drivers rely
- on this feature such as the radeonfb, rivafb, and the i810fb. If
- your driver does not take advantage of this feature, choosing Y will
- just increase the kernel size by about 5K.
-
-config FB_TILEBLITTING
- bool "Enable Tile Blitting Support"
- depends on FB
- default n
- ---help---
- This enables tile blitting. Tile blitting is a drawing technique
- where the screen is divided into rectangular sections (tiles), whereas
- the standard blitting divides the screen into pixels. Because the
- default drawing element is a tile, drawing functions will be passed
- parameters in terms of number of tiles instead of number of pixels.
- For example, to draw a single character, instead of using bitmaps,
- an index to an array of bitmaps will be used. To clear or move a
- rectangular section of a screen, the rectangle will be described in
- terms of number of tiles in the x- and y-axis.
-
- This is particularly important to one driver, matroxfb. If
- unsure, say N.
-
-comment "Frame buffer hardware drivers"
- depends on FB
-
-config FB_GRVGA
- tristate "Aeroflex Gaisler framebuffer support"
- depends on FB && SPARC
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- ---help---
- This enables support for the SVGACTRL framebuffer in the GRLIB IP library from Aeroflex Gaisler.
-
-config FB_CIRRUS
- tristate "Cirrus Logic support"
- depends on FB && (ZORRO || PCI)
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- ---help---
- This enables support for Cirrus Logic GD542x/543x based boards on
- Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
-
- If you have a PCI-based system, this enables support for these
- chips: GD-543x, GD-544x, GD-5480.
-
- Please read the file <file:Documentation/fb/cirrusfb.txt>.
-
- Say N unless you have such a graphics board or plan to get one
- before you next recompile the kernel.
-
-config FB_PM2
- tristate "Permedia2 support"
- depends on FB && ((AMIGA && BROKEN) || PCI)
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for cards based on
- the 3D Labs Permedia, Permedia 2 and Permedia 2V chips.
- The driver was tested on the following cards:
- Diamond FireGL 1000 PRO AGP
- ELSA Gloria Synergy PCI
- Appian Jeronimo PRO (both heads) PCI
- 3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI
- Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
- ASK Graphic Blaster Exxtreme AGP
-
- To compile this driver as a module, choose M here: the
- module will be called pm2fb.
-
-config FB_PM2_FIFO_DISCONNECT
- bool "enable FIFO disconnect feature"
- depends on FB_PM2 && PCI
- help
- Support the Permedia2 FIFO disconnect feature.
-
-config FB_ARMCLCD
- tristate "ARM PrimeCell PL110 support"
- depends on ARM || ARM64 || COMPILE_TEST
- depends on FB && ARM_AMBA
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This framebuffer device driver is for the ARM PrimeCell PL110
- Colour LCD controller. ARM PrimeCells provide the building
- blocks for System on a Chip devices.
-
- If you want to compile this as a module (=code which can be
- inserted into and removed from the running kernel), say M
- here and read <file:Documentation/kbuild/modules.txt>. The module
- will be called amba-clcd.
-
-config FB_ACORN
- bool "Acorn VIDC support"
- depends on (FB = y) && ARM && ARCH_ACORN
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the Acorn VIDC graphics
- hardware found in Acorn RISC PCs and other ARM-based machines. If
- unsure, say N.
-
-config FB_CLPS711X
- bool "CLPS711X LCD support"
- depends on (FB = y) && ARM && ARCH_CLPS711X
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- Say Y to enable the Framebuffer driver for the CLPS7111 and
- EP7212 processors.
-
-config FB_SA1100
- bool "SA-1100 LCD support"
- depends on (FB = y) && ARM && ARCH_SA1100
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is a framebuffer device for the SA-1100 LCD Controller.
- See <http://www.linux-fbdev.org/> for information on framebuffer
- devices.
-
- If you plan to use the LCD display with your SA-1100 system, say
- Y here.
-
-config FB_IMX
- tristate "Freescale i.MX1/21/25/27 LCD support"
- depends on FB && ARCH_MXC
- select BACKLIGHT_LCD_SUPPORT
- select LCD_CLASS_DEVICE
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select FB_MODE_HELPERS
- select VIDEOMODE_HELPERS
-
-config FB_CYBER2000
- tristate "CyberPro 2000/2010/5000 support"
- depends on FB && PCI && (BROKEN || !SPARC64)
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This enables support for the Integraphics CyberPro 20x0 and 5000
- VGA chips used in the Rebel.com Netwinder and other machines.
- Say Y if you have a NetWinder or a graphics card containing this
- device, otherwise say N.
-
-config FB_CYBER2000_DDC
- bool "DDC for CyberPro support"
- depends on FB_CYBER2000
- select FB_DDC
- default y
- help
- Say Y here if you want DDC support for your CyberPro graphics
- card. This is only I2C bus support, driver does not use EDID.
-
-config FB_CYBER2000_I2C
- bool "CyberPro 2000/2010/5000 I2C support"
- depends on FB_CYBER2000 && I2C && ARCH_NETWINDER
- select I2C_ALGOBIT
- help
- Enable support for the I2C video decoder interface on the
- Integraphics CyberPro 20x0 and 5000 VGA chips. This is used
- on the Netwinder machines for the SAA7111 video capture.
-
-config FB_APOLLO
- bool
- depends on (FB = y) && APOLLO
- default y
- select FB_CFB_FILLRECT
- select FB_CFB_IMAGEBLIT
-
-config FB_Q40
- bool
- depends on (FB = y) && Q40
- default y
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
-
-config FB_AMIGA
- tristate "Amiga native chipset support"
- depends on FB && AMIGA
- help
- This is the frame buffer device driver for the builtin graphics
- chipset found in Amigas.
-
- To compile this driver as a module, choose M here: the
- module will be called amifb.
-
-config FB_AMIGA_OCS
- bool "Amiga OCS chipset support"
- depends on FB_AMIGA
- help
- This enables support for the original Agnus and Denise video chips,
- found in the Amiga 1000 and most A500's and A2000's. If you intend
- to run Linux on any of these systems, say Y; otherwise say N.
-
-config FB_AMIGA_ECS
- bool "Amiga ECS chipset support"
- depends on FB_AMIGA
- help
- This enables support for the Enhanced Chip Set, found in later
- A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If
- you intend to run Linux on any of these systems, say Y; otherwise
- say N.
-
-config FB_AMIGA_AGA
- bool "Amiga AGA chipset support"
- depends on FB_AMIGA
- help
- This enables support for the Advanced Graphics Architecture (also
- known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T
- and CD32. If you intend to run Linux on any of these systems, say Y;
- otherwise say N.
-
-config FB_FM2
- bool "Amiga FrameMaster II/Rainbow II support"
- depends on (FB = y) && ZORRO
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the Amiga FrameMaster
- card from BSC (exhibited 1992 but not shipped as a CBM product).
-
-config FB_ARC
- tristate "Arc Monochrome LCD board support"
- depends on FB && X86
- select FB_SYS_FILLRECT
- select FB_SYS_COPYAREA
- select FB_SYS_IMAGEBLIT
- select FB_SYS_FOPS
- help
- This enables support for the Arc Monochrome LCD board. The board
- is based on the KS-108 lcd controller and is typically a matrix
- of 2*n chips. This driver was tested with a 128x64 panel. This
- driver supports it for use with x86 SBCs through a 16 bit GPIO
- interface (8 bit data, 8 bit control). If you anticipate using
- this driver, say Y or M; otherwise say N. You must specify the
- GPIO IO address to be used for setting control and data.
-
-config FB_ATARI
- bool "Atari native chipset support"
- depends on (FB = y) && ATARI
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the builtin graphics
- chipset found in Ataris.
-
-config FB_OF
- bool "Open Firmware frame buffer device support"
- depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI)
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select FB_MACMODES
- help
- Say Y if you want support with Open Firmware for your graphics
- board.
-
-config FB_CONTROL
- bool "Apple \"control\" display support"
- depends on (FB = y) && PPC_PMAC && PPC32
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select FB_MACMODES
- help
- This driver supports a frame buffer for the graphics adapter in the
- Power Macintosh 7300 and others.
-
-config FB_PLATINUM
- bool "Apple \"platinum\" display support"
- depends on (FB = y) && PPC_PMAC && PPC32
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select FB_MACMODES
- help
- This driver supports a frame buffer for the "platinum" graphics
- adapter in some Power Macintoshes.
-
-config FB_VALKYRIE
- bool "Apple \"valkyrie\" display support"
- depends on (FB = y) && (MAC || (PPC_PMAC && PPC32))
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select FB_MACMODES
- help
- This driver supports a frame buffer for the "valkyrie" graphics
- adapter in some Power Macintoshes.
-
-config FB_CT65550
- bool "Chips 65550 display support"
- depends on (FB = y) && PPC32 && PCI
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the Chips & Technologies
- 65550 graphics chip in PowerBooks.
-
-config FB_ASILIANT
- bool "Asiliant (Chips) 69000 display support"
- depends on (FB = y) && PCI
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the Asiliant 69030 chipset
-
-config FB_IMSTT
- bool "IMS Twin Turbo display support"
- depends on (FB = y) && PCI
- select FB_CFB_IMAGEBLIT
- select FB_MACMODES if PPC
- help
- The IMS Twin Turbo is a PCI-based frame buffer card bundled with
- many Macintosh and compatible computers.
-
-config FB_VGA16
- tristate "VGA 16-color graphics support"
- depends on FB && (X86 || PPC)
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select VGASTATE
- select FONT_8x16 if FRAMEBUFFER_CONSOLE
- help
- This is the frame buffer device driver for VGA 16 color graphic
- cards. Say Y if you have such a card.
-
- To compile this driver as a module, choose M here: the
- module will be called vga16fb.
-
-config FB_BF54X_LQ043
- tristate "SHARP LQ043 TFT LCD (BF548 EZKIT)"
- depends on FB && (BF54x) && !BF542
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD
-
-config FB_BFIN_T350MCQB
- tristate "Varitronix COG-T350MCQB TFT LCD display (BF527 EZKIT)"
- depends on FB && BLACKFIN
- select BFIN_GPTIMERS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the framebuffer device driver for a Varitronix VL-PS-COG-T350MCQB-01 display TFT LCD
- This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
- It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
-
-config FB_BFIN_LQ035Q1
- tristate "SHARP LQ035Q1DH02 TFT LCD"
- depends on FB && BLACKFIN && SPI
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select BFIN_GPTIMERS
- help
- This is the framebuffer device driver for a SHARP LQ035Q1DH02 TFT display found on
- the Blackfin Landscape LCD EZ-Extender Card.
- This display is a QVGA 320x240 18-bit RGB display interfaced by an 16-bit wide PPI
- It uses PPI[0..15] PPI_FS1, PPI_FS2 and PPI_CLK.
-
- To compile this driver as a module, choose M here: the
- module will be called bfin-lq035q1-fb.
-
-config FB_BF537_LQ035
- tristate "SHARP LQ035 TFT LCD (BF537 STAMP)"
- depends on FB && (BF534 || BF536 || BF537) && I2C_BLACKFIN_TWI
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select BFIN_GPTIMERS
- help
- This is the framebuffer device for a SHARP LQ035Q7DB03 TFT LCD
- attached to a BF537.
-
- To compile this driver as a module, choose M here: the
- module will be called bf537-lq035.
-
-config FB_BFIN_7393
- tristate "Blackfin ADV7393 Video encoder"
- depends on FB && BLACKFIN
- select I2C
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the framebuffer device for a ADV7393 video encoder
- attached to a Blackfin on the PPI port.
- If your Blackfin board has a ADV7393 select Y.
-
- To compile this driver as a module, choose M here: the
- module will be called bfin_adv7393fb.
-
-choice
- prompt "Video mode support"
- depends on FB_BFIN_7393
- default NTSC
-
-config NTSC
- bool 'NTSC 720x480'
-
-config PAL
- bool 'PAL 720x576'
-
-config NTSC_640x480
- bool 'NTSC 640x480 (Experimental)'
-
-config PAL_640x480
- bool 'PAL 640x480 (Experimental)'
-
-config NTSC_YCBCR
- bool 'NTSC 720x480 YCbCR input'
-
-config PAL_YCBCR
- bool 'PAL 720x576 YCbCR input'
-
-endchoice
-
-choice
- prompt "Size of ADV7393 frame buffer memory Single/Double Size"
- depends on (FB_BFIN_7393)
- default ADV7393_1XMEM
-
-config ADV7393_1XMEM
- bool 'Single'
-
-config ADV7393_2XMEM
- bool 'Double'
-endchoice
-
-config FB_STI
- tristate "HP STI frame buffer device support"
- depends on FB && PARISC
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select STI_CONSOLE
- select VT
- default y
- ---help---
- STI refers to the HP "Standard Text Interface" which is a set of
- BIOS routines contained in a ROM chip in HP PA-RISC based machines.
- Enabling this option will implement the linux framebuffer device
- using calls to the STI BIOS routines for initialisation.
-
- If you enable this option, you will get a planar framebuffer device
- /dev/fb which will work on the most common HP graphic cards of the
- NGLE family, including the artist chips (in the 7xx and Bxxx series),
- HCRX, HCRX24, CRX, CRX24 and VisEG series.
-
- It is safe to enable this option, so you should probably say "Y".
-
-config FB_MAC
- bool "Generic Macintosh display support"
- depends on (FB = y) && MAC
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select FB_MACMODES
-
-config FB_HP300
- bool
- depends on (FB = y) && DIO
- select FB_CFB_IMAGEBLIT
- default y
-
-config FB_TGA
- tristate "TGA/SFB+ framebuffer support"
- depends on FB && (ALPHA || TC)
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select BITREVERSE
- ---help---
- This is the frame buffer device driver for generic TGA and SFB+
- graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
- also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
- TURBOchannel cards, also known as PMAGD-A, -B and -C.
-
- Due to hardware limitations ZLX-E2 and E3 cards are not supported
- for DECstation 5000/200 systems. Additionally due to firmware
- limitations these cards may cause troubles with booting DECstation
- 5000/240 and /260 systems, but are fully supported under Linux if
- you manage to get it going. ;-)
-
- Say Y if you have one of those.
-
-config FB_UVESA
- tristate "Userspace VESA VGA graphics support"
- depends on FB && CONNECTOR
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select FB_MODE_HELPERS
- help
- This is the frame buffer driver for generic VBE 2.0 compliant
- graphic cards. It can also take advantage of VBE 3.0 features,
- such as refresh rate adjustment.
-
- This driver generally provides more features than vesafb but
- requires a userspace helper application called 'v86d'. See
- <file:Documentation/fb/uvesafb.txt> for more information.
-
- If unsure, say N.
-
-config FB_VESA
- bool "VESA VGA graphics support"
- depends on (FB = y) && X86
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select FB_BOOT_VESA_SUPPORT
- help
- This is the frame buffer device driver for generic VESA 2.0
- compliant graphic cards. The older VESA 1.2 cards are not supported.
- You will get a boot time penguin logo at no additional cost. Please
- read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
-
-config FB_EFI
- bool "EFI-based Framebuffer Support"
- depends on (FB = y) && X86 && EFI
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the EFI frame buffer device driver. If the firmware on
- your platform is EFI 1.10 or UEFI 2.0, select Y to add support for
- using the EFI framebuffer as your console.
-
-config FB_N411
- tristate "N411 Apollo/Hecuba devkit support"
- depends on FB && X86 && MMU
- select FB_SYS_FILLRECT
- select FB_SYS_COPYAREA
- select FB_SYS_IMAGEBLIT
- select FB_SYS_FOPS
- select FB_DEFERRED_IO
- select FB_HECUBA
- help
- This enables support for the Apollo display controller in its
- Hecuba form using the n411 devkit.
-
-config FB_HGA
- tristate "Hercules mono graphics support"
- depends on FB && X86
- help
- Say Y here if you have a Hercules mono graphics card.
-
- To compile this driver as a module, choose M here: the
- module will be called hgafb.
-
- As this card technology is at least 25 years old,
- most people will answer N here.
-
-config FB_GBE
- bool "SGI Graphics Backend frame buffer support"
- depends on (FB = y) && SGI_IP32
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for SGI Graphics Backend.
- This chip is used in SGI O2 and Visual Workstation 320/540.
-
-config FB_GBE_MEM
- int "Video memory size in MB"
- depends on FB_GBE
- default 4
- help
- This is the amount of memory reserved for the framebuffer,
- which can be any value between 1MB and 8MB.
-
-config FB_SBUS
- bool "SBUS and UPA framebuffers"
- depends on (FB = y) && SPARC
- help
- Say Y if you want support for SBUS or UPA based frame buffer device.
-
-config FB_BW2
- bool "BWtwo support"
- depends on (FB = y) && (SPARC && FB_SBUS)
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the BWtwo frame buffer.
-
-config FB_CG3
- bool "CGthree support"
- depends on (FB = y) && (SPARC && FB_SBUS)
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the CGthree frame buffer.
-
-config FB_CG6
- bool "CGsix (GX,TurboGX) support"
- depends on (FB = y) && (SPARC && FB_SBUS)
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the CGsix (GX, TurboGX)
- frame buffer.
-
-config FB_FFB
- bool "Creator/Creator3D/Elite3D support"
- depends on FB_SBUS && SPARC64
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the Creator, Creator3D,
- and Elite3D graphics boards.
-
-config FB_TCX
- bool "TCX (SS4/SS5 only) support"
- depends on FB_SBUS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the TCX 24/8bit frame
- buffer.
-
-config FB_CG14
- bool "CGfourteen (SX) support"
- depends on FB_SBUS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the CGfourteen frame
- buffer on Desktop SPARCsystems with the SX graphics option.
-
-config FB_P9100
- bool "P9100 (Sparcbook 3 only) support"
- depends on FB_SBUS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the P9100 card
- supported on Sparcbook 3 machines.
-
-config FB_LEO
- bool "Leo (ZX) support"
- depends on FB_SBUS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the SBUS-based Sun ZX
- (leo) frame buffer cards.
-
-config FB_IGA
- bool "IGA 168x display support"
- depends on (FB = y) && SPARC32
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the framebuffer device for the INTERGRAPHICS 1680 and
- successor frame buffer cards.
-
-config FB_XVR500
- bool "Sun XVR-500 3DLABS Wildcat support"
- depends on (FB = y) && PCI && SPARC64
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the framebuffer device for the Sun XVR-500 and similar
- graphics cards based upon the 3DLABS Wildcat chipset. The driver
- only works on sparc64 systems where the system firmware has
- mostly initialized the card already. It is treated as a
- completely dumb framebuffer device.
-
-config FB_XVR2500
- bool "Sun XVR-2500 3DLABS Wildcat support"
- depends on (FB = y) && PCI && SPARC64
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the framebuffer device for the Sun XVR-2500 and similar
- graphics cards based upon the 3DLABS Wildcat chipset. The driver
- only works on sparc64 systems where the system firmware has
- mostly initialized the card already. It is treated as a
- completely dumb framebuffer device.
-
-config FB_XVR1000
- bool "Sun XVR-1000 support"
- depends on (FB = y) && SPARC64
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the framebuffer device for the Sun XVR-1000 and similar
- graphics cards. The driver only works on sparc64 systems where
- the system firmware has mostly initialized the card already. It
- is treated as a completely dumb framebuffer device.
-
-config FB_PVR2
- tristate "NEC PowerVR 2 display support"
- depends on FB && SH_DREAMCAST
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- ---help---
- Say Y here if you have a PowerVR 2 card in your box. If you plan to
- run linux on your Dreamcast, you will have to say Y here.
- This driver may or may not work on other PowerVR 2 cards, but is
- totally untested. Use at your own risk. If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called pvr2fb.
-
- You can pass several parameters to the driver at boot time or at
- module load time. The parameters look like "video=pvr2:XXX", where
- the meaning of XXX can be found at the end of the main source file
- (<file:drivers/video/pvr2fb.c>). Please see the file
- <file:Documentation/fb/pvr2fb.txt>.
-
-config FB_OPENCORES
- tristate "OpenCores VGA/LCD core 2.0 framebuffer support"
- depends on FB && HAS_DMA
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This enables support for the OpenCores VGA/LCD core.
-
- The OpenCores VGA/LCD core is typically used together with
- softcore CPUs (e.g. OpenRISC or Microblaze) or hard processor
- systems (e.g. Altera socfpga or Xilinx Zynq) on FPGAs.
-
- The source code and specification for the core is available at
- <http://opencores.org/project,vga_lcd>
-
-config FB_S1D13XXX
- tristate "Epson S1D13XXX framebuffer support"
- depends on FB
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- Support for S1D13XXX framebuffer device family (currently only
- working with S1D13806). Product specs at
- <http://vdc.epson.com/>
-
-config FB_ATMEL
- tristate "AT91/AT32 LCD Controller support"
- depends on FB && HAVE_FB_ATMEL
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select FB_MODE_HELPERS
- select VIDEOMODE_HELPERS
- help
- This enables support for the AT91/AT32 LCD Controller.
-
-config FB_INTSRAM
- bool "Frame Buffer in internal SRAM"
- depends on FB_ATMEL && ARCH_AT91SAM9261
- help
- Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
- to let frame buffer in external SDRAM.
-
-config FB_ATMEL_STN
- bool "Use a STN display with AT91/AT32 LCD Controller"
- depends on FB_ATMEL && (MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK)
- default n
- help
- Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
- Controller. Say N if you want to connect a TFT.
-
- If unsure, say N.
-
-config FB_NVIDIA
- tristate "nVidia Framebuffer Support"
- depends on FB && PCI
- select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT
- select FB_MODE_HELPERS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select BITREVERSE
- select VGASTATE
- help
- This driver supports graphics boards with the nVidia chips, TNT
- and newer. For very old chipsets, such as the RIVA128, then use
- the rivafb.
- Say Y if you have such a graphics board.
-
- To compile this driver as a module, choose M here: the
- module will be called nvidiafb.
-
-config FB_NVIDIA_I2C
- bool "Enable DDC Support"
- depends on FB_NVIDIA
- select FB_DDC
- help
- This enables I2C support for nVidia Chipsets. This is used
- only for getting EDID information from the attached display
- allowing for robust video mode handling and switching.
-
- Because fbdev-2.6 requires that drivers must be able to
- independently validate video mode parameters, you should say Y
- here.
-
-config FB_NVIDIA_DEBUG
- bool "Lots of debug output"
- depends on FB_NVIDIA
- default n
- help
- Say Y here if you want the nVidia driver to output all sorts
- of debugging information to provide to the maintainer when
- something goes wrong.
-
-config FB_NVIDIA_BACKLIGHT
- bool "Support for backlight control"
- depends on FB_NVIDIA
- default y
- help
- Say Y here if you want to control the backlight of your display.
-
-config FB_RIVA
- tristate "nVidia Riva support"
- depends on FB && PCI
- select FB_BACKLIGHT if FB_RIVA_BACKLIGHT
- select FB_MODE_HELPERS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select BITREVERSE
- select VGASTATE
- help
- This driver supports graphics boards with the nVidia Riva/Geforce
- chips.
- Say Y if you have such a graphics board.
-
- To compile this driver as a module, choose M here: the
- module will be called rivafb.
-
-config FB_RIVA_I2C
- bool "Enable DDC Support"
- depends on FB_RIVA
- select FB_DDC
- help
- This enables I2C support for nVidia Chipsets. This is used
- only for getting EDID information from the attached display
- allowing for robust video mode handling and switching.
-
- Because fbdev-2.6 requires that drivers must be able to
- independently validate video mode parameters, you should say Y
- here.
-
-config FB_RIVA_DEBUG
- bool "Lots of debug output"
- depends on FB_RIVA
- default n
- help
- Say Y here if you want the Riva driver to output all sorts
- of debugging information to provide to the maintainer when
- something goes wrong.
-
-config FB_RIVA_BACKLIGHT
- bool "Support for backlight control"
- depends on FB_RIVA
- default y
- help
- Say Y here if you want to control the backlight of your display.
-
-config FB_I740
- tristate "Intel740 support"
- depends on FB && PCI
- select FB_MODE_HELPERS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select VGASTATE
- select FB_DDC
- help
- This driver supports graphics cards based on Intel740 chip.
-
-config FB_I810
- tristate "Intel 810/815 support"
- depends on FB && PCI && X86_32 && AGP_INTEL
- select FB_MODE_HELPERS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select VGASTATE
- help
- This driver supports the on-board graphics built in to the Intel 810
- and 815 chipsets. Say Y if you have and plan to use such a board.
-
- To compile this driver as a module, choose M here: the
- module will be called i810fb.
-
- For more information, please read
- <file:Documentation/fb/intel810.txt>
-
-config FB_I810_GTF
- bool "use VESA Generalized Timing Formula"
- depends on FB_I810
- help
- If you say Y, then the VESA standard, Generalized Timing Formula
- or GTF, will be used to calculate the required video timing values
- per video mode. Since the GTF allows nondiscrete timings
- (nondiscrete being a range of values as opposed to discrete being a
- set of values), you'll be able to use any combination of horizontal
- and vertical resolutions, and vertical refresh rates without having
- to specify your own timing parameters. This is especially useful
- to maximize the performance of an aging display, or if you just
- have a display with nonstandard dimensions. A VESA compliant
- monitor is recommended, but can still work with non-compliant ones.
- If you need or want this, then select this option. The timings may
- not be compliant with Intel's recommended values. Use at your own
- risk.
-
- If you say N, the driver will revert to discrete video timings
- using a set recommended by Intel in their documentation.
-
- If unsure, say N.
-
-config FB_I810_I2C
- bool "Enable DDC Support"
- depends on FB_I810 && FB_I810_GTF
- select FB_DDC
- help
-
-config FB_LE80578
- tristate "Intel LE80578 (Vermilion) support"
- depends on FB && PCI && X86
- select FB_MODE_HELPERS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This driver supports the LE80578 (Vermilion Range) chipset
-
-config FB_CARILLO_RANCH
- tristate "Intel Carillo Ranch support"
- depends on FB_LE80578 && FB && PCI && X86
- help
- This driver supports the LE80578 (Carillo Ranch) board
-
-config FB_INTEL
- tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support"
- depends on FB && PCI && X86 && AGP_INTEL && EXPERT
- select FB_MODE_HELPERS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select FB_BOOT_VESA_SUPPORT if FB_INTEL = y
- depends on !DRM_I915
- help
- This driver supports the on-board graphics built in to the Intel
- 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
- Say Y if you have and plan to use such a board.
-
- To make FB_INTELFB=Y work you need to say AGP_INTEL=y too.
-
- To compile this driver as a module, choose M here: the
- module will be called intelfb.
-
- For more information, please read <file:Documentation/fb/intelfb.txt>
-
-config FB_INTEL_DEBUG
- bool "Intel driver Debug Messages"
- depends on FB_INTEL
- ---help---
- Say Y here if you want the Intel driver to output all sorts
- of debugging information to provide to the maintainer when
- something goes wrong.
-
-config FB_INTEL_I2C
- bool "DDC/I2C for Intel framebuffer support"
- depends on FB_INTEL
- select FB_DDC
- default y
- help
- Say Y here if you want DDC/I2C support for your on-board Intel graphics.
-
-config FB_MATROX
- tristate "Matrox acceleration"
- depends on FB && PCI
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select FB_TILEBLITTING
- select FB_MACMODES if PPC_PMAC
- ---help---
- Say Y here if you have a Matrox Millennium, Matrox Millennium II,
- Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
- Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,
- Matrox G400, G450 or G550 card in your box.
-
- To compile this driver as a module, choose M here: the
- module will be called matroxfb.
-
- You can pass several parameters to the driver at boot time or at
- module load time. The parameters look like "video=matroxfb:XXX", and
- are described in <file:Documentation/fb/matroxfb.txt>.
-
-config FB_MATROX_MILLENIUM
- bool "Millennium I/II support"
- depends on FB_MATROX
- help
- Say Y here if you have a Matrox Millennium or Matrox Millennium II
- video card. If you select "Advanced lowlevel driver options" below,
- you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp
- packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can
- also use font widths different from 8.
-
-config FB_MATROX_MYSTIQUE
- bool "Mystique support"
- depends on FB_MATROX
- help
- Say Y here if you have a Matrox Mystique or Matrox Mystique 220
- video card. If you select "Advanced lowlevel driver options" below,
- you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp
- packed pixel and 32 bpp packed pixel. You can also use font widths
- different from 8.
-
-config FB_MATROX_G
- bool "G100/G200/G400/G450/G550 support"
- depends on FB_MATROX
- ---help---
- Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
- video card. If you select "Advanced lowlevel driver options", you
- should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
- pixel and 32 bpp packed pixel. You can also use font widths
- different from 8.
-
- If you need support for G400 secondary head, you must say Y to
- "Matrox I2C support" and "G400 second head support" right below.
- G450/G550 secondary head and digital output are supported without
- additional modules.
-
- The driver starts in monitor mode. You must use the matroxset tool
- (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
- swap primary and secondary head outputs, or to change output mode.
- Secondary head driver always start in 640x480 resolution and you
- must use fbset to change it.
-
- Do not forget that second head supports only 16 and 32 bpp
- packed pixels, so it is a good idea to compile them into the kernel
- too. You can use only some font widths, as the driver uses generic
- painting procedures (the secondary head does not use acceleration
- engine).
-
- G450/G550 hardware can display TV picture only from secondary CRTC,
- and it performs no scaling, so picture must have 525 or 625 lines.
-
-config FB_MATROX_I2C
- tristate "Matrox I2C support"
- depends on FB_MATROX
- select FB_DDC
- ---help---
- This drivers creates I2C buses which are needed for accessing the
- DDC (I2C) bus present on all Matroxes, an I2C bus which
- interconnects Matrox optional devices, like MGA-TVO on G200 and
- G400, and the secondary head DDC bus, present on G400 only.
-
- You can say Y or M here if you want to experiment with monitor
- detection code. You must say Y or M here if you want to use either
- second head of G400 or MGA-TVO on G200 or G400.
-
- If you compile it as module, it will create a module named
- i2c-matroxfb.
-
-config FB_MATROX_MAVEN
- tristate "G400 second head support"
- depends on FB_MATROX_G && FB_MATROX_I2C
- ---help---
- WARNING !!! This support does not work with G450 !!!
-
- Say Y or M here if you want to use a secondary head (meaning two
- monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
- head is not compatible with accelerated XFree 3.3.x SVGA servers -
- secondary head output is blanked while you are in X. With XFree
- 3.9.17 preview you can use both heads if you use SVGA over fbdev or
- the fbdev driver on first head and the fbdev driver on second head.
-
- If you compile it as module, two modules are created,
- matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for
- both G200 and G400, matroxfb_crtc2 is needed only by G400. You must
- also load i2c-matroxfb to get it to run.
-
- The driver starts in monitor mode and you must use the matroxset
- tool (available at
- <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
- PAL or NTSC or to swap primary and secondary head outputs.
- Secondary head driver also always start in 640x480 resolution, you
- must use fbset to change it.
-
- Also do not forget that second head supports only 16 and 32 bpp
- packed pixels, so it is a good idea to compile them into the kernel
- too. You can use only some font widths, as the driver uses generic
- painting procedures (the secondary head does not use acceleration
- engine).
-
-config FB_RADEON
- tristate "ATI Radeon display support"
- depends on FB && PCI
- select FB_BACKLIGHT if FB_RADEON_BACKLIGHT
- select FB_MODE_HELPERS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select FB_MACMODES if PPC_OF
- help
- Choose this option if you want to use an ATI Radeon graphics card as
- a framebuffer device. There are both PCI and AGP versions. You
- don't need to choose this to run the Radeon in plain VGA mode.
-
- There is a product page at
- http://products.amd.com/en-us/GraphicCardResult.aspx
-
-config FB_RADEON_I2C
- bool "DDC/I2C for ATI Radeon support"
- depends on FB_RADEON
- select FB_DDC
- default y
- help
- Say Y here if you want DDC/I2C support for your Radeon board.
-
-config FB_RADEON_BACKLIGHT
- bool "Support for backlight control"
- depends on FB_RADEON
- default y
- help
- Say Y here if you want to control the backlight of your display.
-
-config FB_RADEON_DEBUG
- bool "Lots of debug output from Radeon driver"
- depends on FB_RADEON
- default n
- help
- Say Y here if you want the Radeon driver to output all sorts
- of debugging information to provide to the maintainer when
- something goes wrong.
-
-config FB_ATY128
- tristate "ATI Rage128 display support"
- depends on FB && PCI
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select FB_BACKLIGHT if FB_ATY128_BACKLIGHT
- select FB_MACMODES if PPC_PMAC
- help
- This driver supports graphics boards with the ATI Rage128 chips.
- Say Y if you have such a graphics board and read
- <file:Documentation/fb/aty128fb.txt>.
-
- To compile this driver as a module, choose M here: the
- module will be called aty128fb.
-
-config FB_ATY128_BACKLIGHT
- bool "Support for backlight control"
- depends on FB_ATY128
- default y
- help
- Say Y here if you want to control the backlight of your display.
-
-config FB_ATY
- tristate "ATI Mach64 display support" if PCI || ATARI
- depends on FB && !SPARC32
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select FB_BACKLIGHT if FB_ATY_BACKLIGHT
- select FB_MACMODES if PPC
- help
- This driver supports graphics boards with the ATI Mach64 chips.
- Say Y if you have such a graphics board.
-
- To compile this driver as a module, choose M here: the
- module will be called atyfb.
-
-config FB_ATY_CT
- bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
- depends on PCI && FB_ATY
- default y if SPARC64 && PCI
- help
- Say Y here to support use of ATI's 64-bit Rage boards (or other
- boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
- framebuffer device. The ATI product support page for these boards
- is at <http://support.ati.com/products/pc/mach64/mach64.html>.
-
-config FB_ATY_GENERIC_LCD
- bool "Mach64 generic LCD support"
- depends on FB_ATY_CT
- help
- Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
- Rage XC, or Rage XL chipset.
-
-config FB_ATY_GX
- bool "Mach64 GX support" if PCI
- depends on FB_ATY
- default y if ATARI
- help
- Say Y here to support use of the ATI Mach64 Graphics Expression
- board (or other boards based on the Mach64 GX chipset) as a
- framebuffer device. The ATI product support page for these boards
- is at
- <http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
-
-config FB_ATY_BACKLIGHT
- bool "Support for backlight control"
- depends on FB_ATY
- default y
- help
- Say Y here if you want to control the backlight of your display.
-
-config FB_S3
- tristate "S3 Trio/Virge support"
- depends on FB && PCI
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select FB_TILEBLITTING
- select FB_SVGALIB
- select VGASTATE
- select FONT_8x16 if FRAMEBUFFER_CONSOLE
- ---help---
- Driver for graphics boards with S3 Trio / S3 Virge chip.
-
-config FB_S3_DDC
- bool "DDC for S3 support"
- depends on FB_S3
- select FB_DDC
- default y
- help
- Say Y here if you want DDC support for your S3 graphics card.
-
-config FB_SAVAGE
- tristate "S3 Savage support"
- depends on FB && PCI
- select FB_MODE_HELPERS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select VGASTATE
- help
- This driver supports notebooks and computers with S3 Savage PCI/AGP
- chips.
-
- Say Y if you have such a graphics card.
-
- To compile this driver as a module, choose M here; the module
- will be called savagefb.
-
-config FB_SAVAGE_I2C
- bool "Enable DDC2 Support"
- depends on FB_SAVAGE
- select FB_DDC
- help
- This enables I2C support for S3 Savage Chipsets. This is used
- only for getting EDID information from the attached display
- allowing for robust video mode handling and switching.
-
- Because fbdev-2.6 requires that drivers must be able to
- independently validate video mode parameters, you should say Y
- here.
-
-config FB_SAVAGE_ACCEL
- bool "Enable Console Acceleration"
- depends on FB_SAVAGE
- default n
- help
- This option will compile in console acceleration support. If
- the resulting framebuffer console has bothersome glitches, then
- choose N here.
-
-config FB_SIS
- tristate "SiS/XGI display support"
- depends on FB && PCI
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select FB_BOOT_VESA_SUPPORT if FB_SIS = y
- help
- This is the frame buffer device driver for the SiS 300, 315, 330
- and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
- Specs available at <http://www.sis.com> and <http://www.xgitech.com>.
-
- To compile this driver as a module, choose M here; the module
- will be called sisfb.
-
-config FB_SIS_300
- bool "SiS 300 series support"
- depends on FB_SIS
- help
- Say Y here to support use of the SiS 300/305, 540, 630 and 730.
-
-config FB_SIS_315
- bool "SiS 315/330/340 series and XGI support"
- depends on FB_SIS
- help
- Say Y here to support use of the SiS 315, 330 and 340 series
- (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well
- as XGI V3XT, V5, V8 and Z7.
-
-config FB_VIA
- tristate "VIA UniChrome (Pro) and Chrome9 display support"
- depends on FB && PCI && X86
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select I2C_ALGOBIT
- select I2C
- select GPIOLIB
- help
- This is the frame buffer device driver for Graphics chips of VIA
- UniChrome (Pro) Family (CLE266,PM800/CN400,P4M800CE/P4M800Pro/
- CN700/VN800,CX700/VX700,P4M890) and Chrome9 Family (K8M890,CN896
- /P4M900,VX800)
- Say Y if you have a VIA UniChrome graphics board.
-
- To compile this driver as a module, choose M here: the
- module will be called viafb.
-
-if FB_VIA
-
-config FB_VIA_DIRECT_PROCFS
- bool "direct hardware access via procfs (DEPRECATED)(DANGEROUS)"
- depends on FB_VIA
- default n
- help
- Allow direct hardware access to some output registers via procfs.
- This is dangerous but may provide the only chance to get the
- correct output device configuration.
- Its use is strongly discouraged.
-
-config FB_VIA_X_COMPATIBILITY
- bool "X server compatibility"
- depends on FB_VIA
- default n
- help
- This option reduces the functionality (power saving, ...) of the
- framebuffer to avoid negative impact on the OpenChrome X server.
- If you use any X server other than fbdev you should enable this
- otherwise it should be safe to disable it and allow using all
- features.
-
-endif
-
-config FB_NEOMAGIC
- tristate "NeoMagic display support"
- depends on FB && PCI
- select FB_MODE_HELPERS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select VGASTATE
- help
- This driver supports notebooks with NeoMagic PCI chips.
- Say Y if you have such a graphics card.
-
- To compile this driver as a module, choose M here: the
- module will be called neofb.
-
-config FB_KYRO
- tristate "IMG Kyro support"
- depends on FB && PCI
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
- graphics board.
-
- To compile this driver as a module, choose M here: the
- module will be called kyrofb.
-
-config FB_3DFX
- tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support"
- depends on FB && PCI
- select FB_CFB_IMAGEBLIT
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_MODE_HELPERS
- help
- This driver supports graphics boards with the 3Dfx Banshee,
- Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
- such a graphics board.
-
- To compile this driver as a module, choose M here: the
- module will be called tdfxfb.
-
-config FB_3DFX_ACCEL
- bool "3Dfx Acceleration functions"
- depends on FB_3DFX
- ---help---
- This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
- device driver with acceleration functions.
-
-config FB_3DFX_I2C
- bool "Enable DDC/I2C support"
- depends on FB_3DFX
- select FB_DDC
- default y
- help
- Say Y here if you want DDC/I2C support for your 3dfx Voodoo3.
-
-config FB_VOODOO1
- tristate "3Dfx Voodoo Graphics (sst1) support"
- depends on FB && PCI
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- ---help---
- Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or
- Voodoo2 (cvg) based graphics card.
-
- To compile this driver as a module, choose M here: the
- module will be called sstfb.
-
- WARNING: Do not use any application that uses the 3D engine
- (namely glide) while using this driver.
- Please read the <file:Documentation/fb/sstfb.txt> for supported
- options and other important info support.
-
-config FB_VT8623
- tristate "VIA VT8623 support"
- depends on FB && PCI
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select FB_TILEBLITTING
- select FB_SVGALIB
- select VGASTATE
- select FONT_8x16 if FRAMEBUFFER_CONSOLE
- ---help---
- Driver for CastleRock integrated graphics core in the
- VIA VT8623 [Apollo CLE266] chipset.
-
-config FB_TRIDENT
- tristate "Trident/CyberXXX/CyberBlade support"
- depends on FB && PCI
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- ---help---
- This is the frame buffer device driver for Trident PCI/AGP chipsets.
- Supported chipset families are TGUI 9440/96XX, 3DImage, Blade3D
- and Blade XP.
- There are also integrated versions of these chips called CyberXXXX,
- CyberImage or CyberBlade. These chips are mostly found in laptops
- but also on some motherboards including early VIA EPIA motherboards.
- For more information, read <file:Documentation/fb/tridentfb.txt>
-
- Say Y if you have such a graphics board.
-
- To compile this driver as a module, choose M here: the
- module will be called tridentfb.
-
-config FB_ARK
- tristate "ARK 2000PV support"
- depends on FB && PCI
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select FB_TILEBLITTING
- select FB_SVGALIB
- select VGASTATE
- select FONT_8x16 if FRAMEBUFFER_CONSOLE
- ---help---
- Driver for PCI graphics boards with ARK 2000PV chip
- and ICS 5342 RAMDAC.
-
-config FB_PM3
- tristate "Permedia3 support"
- depends on FB && PCI
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the 3DLabs Permedia3
- chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
- similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
- and maybe other boards.
-
-config FB_CARMINE
- tristate "Fujitsu carmine frame buffer support"
- depends on FB && PCI
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the Fujitsu Carmine chip.
- The driver provides two independent frame buffer devices.
-
-choice
- depends on FB_CARMINE
- prompt "DRAM timing"
- default FB_CARMINE_DRAM_EVAL
-
-config FB_CARMINE_DRAM_EVAL
- bool "Eval board timings"
- help
- Use timings which work on the eval card.
-
-config CARMINE_DRAM_CUSTOM
- bool "Custom board timings"
- help
- Use custom board timings.
-endchoice
-
-config FB_AU1100
- bool "Au1100 LCD Driver"
- depends on (FB = y) && MIPS_ALCHEMY
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the framebuffer driver for the AMD Au1100 SOC. It can drive
- various panels and CRTs by passing in kernel cmd line option
- au1100fb:panel=<name>.
-
-config FB_AU1200
- bool "Au1200/Au1300 LCD Driver"
- depends on (FB = y) && MIPS_ALCHEMY
- select FB_SYS_FILLRECT
- select FB_SYS_COPYAREA
- select FB_SYS_IMAGEBLIT
- select FB_SYS_FOPS
- help
- This is the framebuffer driver for the Au1200/Au1300 SOCs.
- It can drive various panels and CRTs by passing in kernel cmd line
- option au1200fb:panel=<name>.
-
-config FB_VT8500
- bool "VIA VT8500 framebuffer support"
- depends on (FB = y) && ARM && ARCH_VT8500
- select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
- select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
- select FB_SYS_IMAGEBLIT
- select FB_MODE_HELPERS
- select VIDEOMODE_HELPERS
- help
- This is the framebuffer driver for VIA VT8500 integrated LCD
- controller.
-
-config FB_WM8505
- bool "Wondermedia WM8xxx-series frame buffer support"
- depends on (FB = y) && ARM && ARCH_VT8500
- select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
- select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
- select FB_SYS_IMAGEBLIT
- select FB_MODE_HELPERS
- select VIDEOMODE_HELPERS
- help
- This is the framebuffer driver for WonderMedia WM8xxx-series
- integrated LCD controller. This driver covers the WM8505, WM8650
- and WM8850 SoCs.
-
-config FB_WMT_GE_ROPS
- bool "VT8500/WM8xxx accelerated raster ops support"
- depends on (FB = y) && (FB_VT8500 || FB_WM8505)
- default n
- help
- This adds support for accelerated raster operations on the
- VIA VT8500 and Wondermedia 85xx series SoCs.
-
-source "drivers/video/geode/Kconfig"
-
-config FB_HIT
- tristate "HD64461 Frame Buffer support"
- depends on FB && HD64461
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the Hitachi HD64461 LCD
- frame buffer card.
-
-config FB_PMAG_AA
- bool "PMAG-AA TURBOchannel framebuffer support"
- depends on (FB = y) && TC
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
- used mainly in the MIPS-based DECstation series.
-
-config FB_PMAG_BA
- tristate "PMAG-BA TURBOchannel framebuffer support"
- depends on FB && TC
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
- used mainly in the MIPS-based DECstation series.
-
-config FB_PMAGB_B
- tristate "PMAGB-B TURBOchannel framebuffer support"
- depends on FB && TC
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- Support for the PMAGB-B TURBOchannel framebuffer card used mainly
- in the MIPS-based DECstation series. The card is currently only
- supported in 1280x1024x8 mode.
-
-config FB_MAXINE
- bool "Maxine (Personal DECstation) onboard framebuffer support"
- depends on (FB = y) && MACH_DECSTATION
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- Support for the onboard framebuffer (1024x768x8) in the Personal
- DECstation series (Personal DECstation 5000/20, /25, /33, /50,
- Codename "Maxine").
-
-config FB_G364
- bool "G364 frame buffer support"
- depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700)
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- The G364 driver is the framebuffer used in MIPS Magnum 4000 and
- Olivetti M700-10 systems.
-
-config FB_68328
- bool "Motorola 68328 native frame buffer support"
- depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328)
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- Say Y here if you want to support the built-in frame buffer of
- the Motorola 68328 CPU family.
-
-config FB_PXA168
- tristate "PXA168/910 LCD framebuffer support"
- depends on FB && (CPU_PXA168 || CPU_PXA910)
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- ---help---
- Frame buffer driver for the built-in LCD controller in the Marvell
- MMP processor.
-
-config FB_PXA
- tristate "PXA LCD framebuffer support"
- depends on FB && ARCH_PXA
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- ---help---
- Frame buffer driver for the built-in LCD controller in the Intel
- PXA2x0 processor.
-
- This driver is also available as a module ( = code which can be
- inserted and removed from the running kernel whenever you want). The
- module will be called pxafb. If you want to compile it as a module,
- say M here and read <file:Documentation/kbuild/modules.txt>.
-
- If unsure, say N.
-
-config FB_PXA_OVERLAY
- bool "Support PXA27x/PXA3xx Overlay(s) as framebuffer"
- default n
- depends on FB_PXA && (PXA27x || PXA3xx)
-
-config FB_PXA_SMARTPANEL
- bool "PXA Smartpanel LCD support"
- default n
- depends on FB_PXA
-
-config FB_PXA_PARAMETERS
- bool "PXA LCD command line parameters"
- default n
- depends on FB_PXA
- ---help---
- Enable the use of kernel command line or module parameters
- to configure the physical properties of the LCD panel when
- using the PXA LCD driver.
-
- This option allows you to override the panel parameters
- supplied by the platform in order to support multiple
- different models of flatpanel. If you will only be using a
- single model of flatpanel then you can safely leave this
- option disabled.
-
- <file:Documentation/fb/pxafb.txt> describes the available parameters.
-
-config PXA3XX_GCU
- tristate "PXA3xx 2D graphics accelerator driver"
- depends on FB_PXA
- help
- Kernelspace driver for the 2D graphics controller unit (GCU)
- found on PXA3xx processors. There is a counterpart driver in the
- DirectFB suite, see http://www.directfb.org/
-
- If you compile this as a module, it will be called pxa3xx_gcu.
-
-config FB_MBX
- tristate "2700G LCD framebuffer support"
- depends on FB && ARCH_PXA
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- ---help---
- Framebuffer driver for the Intel 2700G (Marathon) Graphics
- Accelerator
-
-config FB_MBX_DEBUG
- bool "Enable debugging info via debugfs"
- depends on FB_MBX && DEBUG_FS
- default n
- ---help---
- Enable this if you want debugging information using the debug
- filesystem (debugfs)
-
- If unsure, say N.
-
-config FB_FSL_DIU
- tristate "Freescale DIU framebuffer support"
- depends on FB && FSL_SOC
- select FB_MODE_HELPERS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select PPC_LIB_RHEAP
- ---help---
- Framebuffer driver for the Freescale SoC DIU
-
-config FB_W100
- tristate "W100 frame buffer support"
- depends on FB && ARCH_PXA
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- ---help---
- Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
- It can also drive the w3220 chip found on iPAQ hx4700.
-
- This driver is also available as a module ( = code which can be
- inserted and removed from the running kernel whenever you want). The
- module will be called w100fb. If you want to compile it as a module,
- say M here and read <file:Documentation/kbuild/modules.txt>.
-
- If unsure, say N.
-
-config FB_SH_MOBILE_LCDC
- tristate "SuperH Mobile LCDC framebuffer support"
- depends on FB && (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
- select FB_SYS_FILLRECT
- select FB_SYS_COPYAREA
- select FB_SYS_IMAGEBLIT
- select FB_SYS_FOPS
- select FB_DEFERRED_IO
- select FB_BACKLIGHT
- select SH_MIPI_DSI if SH_LCD_MIPI_DSI
- ---help---
- Frame buffer driver for the on-chip SH-Mobile LCD controller.
-
-config FB_SH_MOBILE_HDMI
- tristate "SuperH Mobile HDMI controller support"
- depends on FB_SH_MOBILE_LCDC
- select FB_MODE_HELPERS
- select SOUND
- select SND
- select SND_SOC
- ---help---
- Driver for the on-chip SH-Mobile HDMI controller.
-
-config FB_TMIO
- tristate "Toshiba Mobile IO FrameBuffer support"
- depends on FB && MFD_CORE
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- ---help---
- Frame buffer driver for the Toshiba Mobile IO integrated as found
- on the Sharp SL-6000 series
-
- This driver is also available as a module ( = code which can be
- inserted and removed from the running kernel whenever you want). The
- module will be called tmiofb. If you want to compile it as a module,
- say M here and read <file:Documentation/kbuild/modules.txt>.
-
- If unsure, say N.
-
-config FB_TMIO_ACCELL
- bool "tmiofb acceleration"
- depends on FB_TMIO
- default y
-
-config FB_S3C
- tristate "Samsung S3C framebuffer support"
- depends on FB && (CPU_S3C2416 || ARCH_S3C64XX || ARCH_S5P64X0 || \
- ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- ---help---
- Frame buffer driver for the built-in FB controller in the Samsung
- SoC line from the S3C2443 onwards, including the S3C2416, S3C2450,
- and the S3C64XX series such as the S3C6400 and S3C6410.
-
- These chips all have the same basic framebuffer design with the
- actual capabilities depending on the chip. For instance the S3C6400
- and S3C6410 support 4 hardware windows whereas the S3C24XX series
- currently only have two.
-
- Currently the support is only for the S3C6400 and S3C6410 SoCs.
-
-config FB_S3C_DEBUG_REGWRITE
- bool "Debug register writes"
- depends on FB_S3C
- ---help---
- Show all register writes via pr_debug()
-
-config FB_S3C2410
- tristate "S3C2410 LCD framebuffer support"
- depends on FB && ARCH_S3C24XX
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- ---help---
- Frame buffer driver for the built-in LCD controller in the Samsung
- S3C2410 processor.
-
- This driver is also available as a module ( = code which can be
- inserted and removed from the running kernel whenever you want). The
- module will be called s3c2410fb. If you want to compile it as a module,
- say M here and read <file:Documentation/kbuild/modules.txt>.
-
- If unsure, say N.
-config FB_S3C2410_DEBUG
- bool "S3C2410 lcd debug messages"
- depends on FB_S3C2410
- help
- Turn on debugging messages. Note that you can set/unset at run time
- through sysfs
-
-config FB_NUC900
- bool "NUC900 LCD framebuffer support"
- depends on FB && ARCH_W90X900
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- ---help---
- Frame buffer driver for the built-in LCD controller in the Nuvoton
- NUC900 processor
-
-config GPM1040A0_320X240
- bool "Giantplus Technology GPM1040A0 320x240 Color TFT LCD"
- depends on FB_NUC900
-
-config FB_SM501
- tristate "Silicon Motion SM501 framebuffer support"
- depends on FB && MFD_SM501
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- ---help---
- Frame buffer driver for the CRT and LCD controllers in the Silicon
- Motion SM501.
-
- This driver is also available as a module ( = code which can be
- inserted and removed from the running kernel whenever you want). The
- module will be called sm501fb. If you want to compile it as a module,
- say M here and read <file:Documentation/kbuild/modules.txt>.
-
- If unsure, say N.
-
-config FB_SMSCUFX
- tristate "SMSC UFX6000/7000 USB Framebuffer support"
- depends on FB && USB
- select FB_MODE_HELPERS
- select FB_SYS_FILLRECT
- select FB_SYS_COPYAREA
- select FB_SYS_IMAGEBLIT
- select FB_SYS_FOPS
- select FB_DEFERRED_IO
- ---help---
- This is a kernel framebuffer driver for SMSC UFX USB devices.
- Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
- mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
- (USB 3.0) devices.
- To compile as a module, choose M here: the module name is smscufx.
-
-config FB_UDL
- tristate "Displaylink USB Framebuffer support"
- depends on FB && USB
- select FB_MODE_HELPERS
- select FB_SYS_FILLRECT
- select FB_SYS_COPYAREA
- select FB_SYS_IMAGEBLIT
- select FB_SYS_FOPS
- select FB_DEFERRED_IO
- ---help---
- This is a kernel framebuffer driver for DisplayLink USB devices.
- Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
- mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
- To compile as a module, choose M here: the module name is udlfb.
-
-config FB_IBM_GXT4500
- tristate "Framebuffer support for IBM GXT4000P/4500P/6000P/6500P adaptors"
- depends on FB && PPC
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- ---help---
- Say Y here to enable support for the IBM GXT4000P/6000P and
- GXT4500P/6500P display adaptor based on Raster Engine RC1000,
- found on some IBM System P (pSeries) machines. This driver
- doesn't use Geometry Engine GT1000.
-
-config FB_PS3
- tristate "PS3 GPU framebuffer driver"
- depends on FB && PS3_PS3AV
- select FB_SYS_FILLRECT
- select FB_SYS_COPYAREA
- select FB_SYS_IMAGEBLIT
- select FB_SYS_FOPS
- select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
- ---help---
- Include support for the virtual frame buffer in the PS3 platform.
-
-config FB_PS3_DEFAULT_SIZE_M
- int "PS3 default frame buffer size (in MiB)"
- depends on FB_PS3
- default 9
- ---help---
- This is the default size (in MiB) of the virtual frame buffer in
- the PS3.
- The default value can be overridden on the kernel command line
- using the "ps3fb" option (e.g. "ps3fb=9M");
-
-config FB_XILINX
- tristate "Xilinx frame buffer support"
- depends on FB && (XILINX_VIRTEX || MICROBLAZE || ARCH_ZYNQ)
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- ---help---
- Include support for the Xilinx ML300/ML403 reference design
- framebuffer. ML300 carries a 640*480 LCD display on the board,
- ML403 uses a standard DB15 VGA connector.
-
-config FB_GOLDFISH
- tristate "Goldfish Framebuffer"
- depends on FB && HAS_DMA
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- ---help---
- Framebuffer driver for Goldfish Virtual Platform
-
-config FB_COBALT
- tristate "Cobalt server LCD frame buffer support"
- depends on FB && (MIPS_COBALT || MIPS_SEAD3)
-
-config FB_SH7760
- bool "SH7760/SH7763/SH7720/SH7721 LCDC support"
- depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763 \
- || CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721)
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- ---help---
- Support for the SH7760/SH7763/SH7720/SH7721 integrated
- (D)STN/TFT LCD Controller.
- Supports display resolutions up to 1024x1024 pixel, grayscale and
- color operation, with depths ranging from 1 bpp to 8 bpp monochrome
- and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
- panels <= 320 pixel horizontal resolution.
-
-config FB_DA8XX
- tristate "DA8xx/OMAP-L1xx/AM335x Framebuffer support"
- depends on FB && (ARCH_DAVINCI_DA8XX || SOC_AM33XX)
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select FB_CFB_REV_PIXELS_IN_BYTE
- select FB_MODE_HELPERS
- select VIDEOMODE_HELPERS
- ---help---
- This is the frame buffer device driver for the TI LCD controller
- found on DA8xx/OMAP-L1xx/AM335x SoCs.
- If unsure, say N.
-
-config FB_VIRTUAL
- tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
- depends on FB
- select FB_SYS_FILLRECT
- select FB_SYS_COPYAREA
- select FB_SYS_IMAGEBLIT
- select FB_SYS_FOPS
- ---help---
- This is a `virtual' frame buffer device. It operates on a chunk of
- unswappable kernel memory instead of on the memory of a graphics
- board. This means you cannot see any output sent to this frame
- buffer device, while it does consume precious memory. The main use
- of this frame buffer device is testing and debugging the frame
- buffer subsystem. Do NOT enable it for normal systems! To protect
- the innocent, it has to be enabled explicitly at boot time using the
- kernel option `video=vfb:'.
-
- To compile this driver as a module, choose M here: the
- module will be called vfb. In order to load it, you must use
- the vfb_enable=1 option.
-
- If unsure, say N.
-
-config XEN_FBDEV_FRONTEND
- tristate "Xen virtual frame buffer support"
- depends on FB && XEN
- select FB_SYS_FILLRECT
- select FB_SYS_COPYAREA
- select FB_SYS_IMAGEBLIT
- select FB_SYS_FOPS
- select FB_DEFERRED_IO
- select INPUT_XEN_KBDDEV_FRONTEND if INPUT_MISC
- select XEN_XENBUS_FRONTEND
- default y
- help
- This driver implements the front-end of the Xen virtual
- frame buffer driver. It communicates with a back-end
- in another domain.
-
-config FB_METRONOME
- tristate "E-Ink Metronome/8track controller support"
- depends on FB
- select FB_SYS_FILLRECT
- select FB_SYS_COPYAREA
- select FB_SYS_IMAGEBLIT
- select FB_SYS_FOPS
- select FB_DEFERRED_IO
- help
- This driver implements support for the E-Ink Metronome
- controller. The pre-release name for this device was 8track
- and could also have been called by some vendors as PVI-nnnn.
-
-config FB_MB862XX
- tristate "Fujitsu MB862xx GDC support"
- depends on FB
- depends on PCI || (OF && PPC)
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- ---help---
- Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
-
-choice
- prompt "GDC variant"
- depends on FB_MB862XX
-
-config FB_MB862XX_PCI_GDC
- bool "Carmine/Coral-P(A) GDC"
- depends on PCI
- ---help---
- This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
- PCI graphics controller devices.
-
-config FB_MB862XX_LIME
- bool "Lime GDC"
- depends on OF && PPC
- select FB_FOREIGN_ENDIAN
- select FB_LITTLE_ENDIAN
- ---help---
- Framebuffer support for Fujitsu Lime GDC on host CPU bus.
-
-endchoice
-
-config FB_MB862XX_I2C
- bool "Support I2C bus on MB862XX GDC"
- depends on FB_MB862XX && I2C
- default y
- help
- Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
- driver to support accessing I2C devices on controller's I2C bus.
- These are usually some video decoder chips.
-
-config FB_EP93XX
- tristate "EP93XX frame buffer support"
- depends on FB && ARCH_EP93XX
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- ---help---
- Framebuffer driver for the Cirrus Logic EP93XX series of processors.
- This driver is also available as a module. The module will be called
- ep93xx-fb.
-
-config FB_PRE_INIT_FB
- bool "Don't reinitialize, use bootloader's GDC/Display configuration"
- depends on FB && FB_MB862XX_LIME
- ---help---
- Select this option if display contents should be inherited as set by
- the bootloader.
-
-config FB_MSM
- tristate "MSM Framebuffer support"
- depends on FB && ARCH_MSM
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
-
-config FB_MX3
- tristate "MX3 Framebuffer support"
- depends on FB && MX3_IPU
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- default y
- help
- This is a framebuffer device for the i.MX31 LCD Controller. So
- far only synchronous displays are supported. If you plan to use
- an LCD display with your i.MX31 system, say Y here.
-
-config FB_BROADSHEET
- tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
- depends on FB
- select FB_SYS_FILLRECT
- select FB_SYS_COPYAREA
- select FB_SYS_IMAGEBLIT
- select FB_SYS_FOPS
- select FB_DEFERRED_IO
- help
- This driver implements support for the E-Ink Broadsheet
- controller. The release name for this device was Epson S1D13521
- and could also have been called by other names when coupled with
- a bridge adapter.
-
-config FB_AUO_K190X
- tristate "AUO-K190X EPD controller support"
- depends on FB
- select FB_SYS_FILLRECT
- select FB_SYS_COPYAREA
- select FB_SYS_IMAGEBLIT
- select FB_SYS_FOPS
- select FB_DEFERRED_IO
- help
- Provides support for epaper controllers from the K190X series
- of AUO. These controllers can be used to drive epaper displays
- from Sipix.
-
- This option enables the common support, shared by the individual
- controller drivers. You will also have to enable the driver
- for the controller type used in your device.
-
-config FB_AUO_K1900
- tristate "AUO-K1900 EPD controller support"
- depends on FB && FB_AUO_K190X
- help
- This driver implements support for the AUO K1900 epd-controller.
- This controller can drive Sipix epaper displays but can only do
- serial updates, reducing the number of possible frames per second.
-
-config FB_AUO_K1901
- tristate "AUO-K1901 EPD controller support"
- depends on FB && FB_AUO_K190X
- help
- This driver implements support for the AUO K1901 epd-controller.
- This controller can drive Sipix epaper displays and supports
- concurrent updates, making higher frames per second possible.
-
-config FB_JZ4740
- tristate "JZ4740 LCD framebuffer support"
- depends on FB && MACH_JZ4740
- select FB_SYS_FILLRECT
- select FB_SYS_COPYAREA
- select FB_SYS_IMAGEBLIT
- help
- Framebuffer support for the JZ4740 SoC.
-
-config FB_MXS
- tristate "MXS LCD framebuffer support"
- depends on FB && ARCH_MXS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select FB_MODE_HELPERS
- select VIDEOMODE_HELPERS
- help
- Framebuffer support for the MXS SoC.
-
-config FB_PUV3_UNIGFX
- tristate "PKUnity v3 Unigfx framebuffer support"
- depends on FB && UNICORE32 && ARCH_PUV3
- select FB_SYS_FILLRECT
- select FB_SYS_COPYAREA
- select FB_SYS_IMAGEBLIT
- select FB_SYS_FOPS
- help
- Choose this option if you want to use the Unigfx device as a
- framebuffer device. Without the support of PCI & AGP.
-
-config FB_HYPERV
- tristate "Microsoft Hyper-V Synthetic Video support"
- depends on FB && HYPERV
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
-
-config FB_SIMPLE
- bool "Simple framebuffer support"
- depends on (FB = y)
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- Say Y if you want support for a simple frame-buffer.
-
- This driver assumes that the display hardware has been initialized
- before the kernel boots, and the kernel will simply render to the
- pre-allocated frame buffer surface.
-
- Configuration re: surface address, size, and format must be provided
- through device tree, or plain old platform data.
-
-source "drivers/video/omap/Kconfig"
-source "drivers/video/omap2/Kconfig"
-source "drivers/video/exynos/Kconfig"
-source "drivers/video/mmp/Kconfig"
-source "drivers/video/backlight/Kconfig"
-
if VT
source "drivers/video/console/Kconfig"
endif
if FB || SGI_NEWPORT_CONSOLE
source "drivers/video/logo/Kconfig"
-endif
-config FB_SH_MOBILE_MERAM
- tristate "SuperH Mobile MERAM read ahead support"
- depends on (SUPERH || ARCH_SHMOBILE)
- select GENERIC_ALLOCATOR
- ---help---
- Enable MERAM support for the SuperH controller.
-
- This will allow for caching of the framebuffer to provide more
- reliable access under heavy main memory bus traffic situations.
- Up to 4 memory channels can be configured, allowing 4 RGB or
- 2 YCbCr framebuffers to be configured.
+endif
-config FB_SSD1307
- tristate "Solomon SSD1307 framebuffer support"
- depends on FB && I2C
- depends on OF
- depends on GPIOLIB
- select FB_SYS_FOPS
- select FB_SYS_FILLRECT
- select FB_SYS_COPYAREA
- select FB_SYS_IMAGEBLIT
- select FB_DEFERRED_IO
- select PWM
- help
- This driver implements support for the Solomon SSD1307
- OLED controller over I2C.
endmenu
-# Makefile for the Linux video drivers.
-# 5 Aug 1999, James Simmons, <mailto:jsimmons@users.sf.net>
-# Rewritten to use lists instead of if-statements.
-
-# Each configuration option enables a list of files.
-
obj-$(CONFIG_VGASTATE) += vgastate.o
obj-$(CONFIG_HDMI) += hdmi.o
-obj-y += fb_notify.o
-obj-$(CONFIG_FB) += fb.o
-fb-y := fbmem.o fbmon.o fbcmap.o fbsysfs.o \
- modedb.o fbcvt.o
-fb-objs := $(fb-y)
obj-$(CONFIG_VT) += console/
obj-$(CONFIG_LOGO) += logo/
obj-y += backlight/
-obj-$(CONFIG_EXYNOS_VIDEO) += exynos/
-
-obj-$(CONFIG_FB_CFB_FILLRECT) += cfbfillrect.o
-obj-$(CONFIG_FB_CFB_COPYAREA) += cfbcopyarea.o
-obj-$(CONFIG_FB_CFB_IMAGEBLIT) += cfbimgblt.o
-obj-$(CONFIG_FB_SYS_FILLRECT) += sysfillrect.o
-obj-$(CONFIG_FB_SYS_COPYAREA) += syscopyarea.o
-obj-$(CONFIG_FB_SYS_IMAGEBLIT) += sysimgblt.o
-obj-$(CONFIG_FB_SYS_FOPS) += fb_sys_fops.o
-obj-$(CONFIG_FB_SVGALIB) += svgalib.o
-obj-$(CONFIG_FB_MACMODES) += macmodes.o
-obj-$(CONFIG_FB_DDC) += fb_ddc.o
-obj-$(CONFIG_FB_DEFERRED_IO) += fb_defio.o
-obj-$(CONFIG_FB_WMT_GE_ROPS) += wmt_ge_rops.o
-
-# Hardware specific drivers go first
-obj-$(CONFIG_FB_AMIGA) += amifb.o c2p_planar.o
-obj-$(CONFIG_FB_ARC) += arcfb.o
-obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o
-obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o
-obj-$(CONFIG_FB_GRVGA) += grvga.o
-obj-$(CONFIG_FB_PM2) += pm2fb.o
-obj-$(CONFIG_FB_PM3) += pm3fb.o
-
-obj-$(CONFIG_FB_I740) += i740fb.o
-obj-$(CONFIG_FB_MATROX) += matrox/
-obj-$(CONFIG_FB_RIVA) += riva/
-obj-$(CONFIG_FB_NVIDIA) += nvidia/
-obj-$(CONFIG_FB_ATY) += aty/ macmodes.o
-obj-$(CONFIG_FB_ATY128) += aty/ macmodes.o
-obj-$(CONFIG_FB_RADEON) += aty/
-obj-$(CONFIG_FB_SIS) += sis/
-obj-$(CONFIG_FB_VIA) += via/
-obj-$(CONFIG_FB_KYRO) += kyro/
-obj-$(CONFIG_FB_SAVAGE) += savage/
-obj-$(CONFIG_FB_GEODE) += geode/
-obj-$(CONFIG_FB_MBX) += mbx/
-obj-$(CONFIG_FB_NEOMAGIC) += neofb.o
-obj-$(CONFIG_FB_3DFX) += tdfxfb.o
-obj-$(CONFIG_FB_CONTROL) += controlfb.o
-obj-$(CONFIG_FB_PLATINUM) += platinumfb.o
-obj-$(CONFIG_FB_VALKYRIE) += valkyriefb.o
-obj-$(CONFIG_FB_CT65550) += chipsfb.o
-obj-$(CONFIG_FB_IMSTT) += imsttfb.o
-obj-$(CONFIG_FB_FM2) += fm2fb.o
-obj-$(CONFIG_FB_VT8623) += vt8623fb.o
-obj-$(CONFIG_FB_TRIDENT) += tridentfb.o
-obj-$(CONFIG_FB_LE80578) += vermilion/
-obj-$(CONFIG_FB_S3) += s3fb.o
-obj-$(CONFIG_FB_ARK) += arkfb.o
-obj-$(CONFIG_FB_STI) += stifb.o
-obj-$(CONFIG_FB_FFB) += ffb.o sbuslib.o
-obj-$(CONFIG_FB_CG6) += cg6.o sbuslib.o
-obj-$(CONFIG_FB_CG3) += cg3.o sbuslib.o
-obj-$(CONFIG_FB_BW2) += bw2.o sbuslib.o
-obj-$(CONFIG_FB_CG14) += cg14.o sbuslib.o
-obj-$(CONFIG_FB_P9100) += p9100.o sbuslib.o
-obj-$(CONFIG_FB_TCX) += tcx.o sbuslib.o
-obj-$(CONFIG_FB_LEO) += leo.o sbuslib.o
-obj-$(CONFIG_FB_ACORN) += acornfb.o
-obj-$(CONFIG_FB_ATARI) += atafb.o c2p_iplan2.o atafb_mfb.o \
- atafb_iplan2p2.o atafb_iplan2p4.o atafb_iplan2p8.o
-obj-$(CONFIG_FB_MAC) += macfb.o
-obj-$(CONFIG_FB_HECUBA) += hecubafb.o
-obj-$(CONFIG_FB_N411) += n411.o
-obj-$(CONFIG_FB_HGA) += hgafb.o
-obj-$(CONFIG_FB_XVR500) += sunxvr500.o
-obj-$(CONFIG_FB_XVR2500) += sunxvr2500.o
-obj-$(CONFIG_FB_XVR1000) += sunxvr1000.o
-obj-$(CONFIG_FB_IGA) += igafb.o
-obj-$(CONFIG_FB_APOLLO) += dnfb.o
-obj-$(CONFIG_FB_Q40) += q40fb.o
-obj-$(CONFIG_FB_TGA) += tgafb.o
-obj-$(CONFIG_FB_HP300) += hpfb.o
-obj-$(CONFIG_FB_G364) += g364fb.o
-obj-$(CONFIG_FB_EP93XX) += ep93xx-fb.o
-obj-$(CONFIG_FB_SA1100) += sa1100fb.o
-obj-$(CONFIG_FB_HIT) += hitfb.o
-obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o
-obj-$(CONFIG_FB_PVR2) += pvr2fb.o
-obj-$(CONFIG_FB_VOODOO1) += sstfb.o
-obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o
-obj-$(CONFIG_FB_GOLDFISH) += goldfishfb.o
-obj-$(CONFIG_FB_68328) += 68328fb.o
-obj-$(CONFIG_FB_GBE) += gbefb.o
-obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o
-obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o
-obj-$(CONFIG_FB_PXA) += pxafb.o
-obj-$(CONFIG_FB_PXA168) += pxa168fb.o
-obj-$(CONFIG_PXA3XX_GCU) += pxa3xx-gcu.o
-obj-$(CONFIG_MMP_DISP) += mmp/
-obj-$(CONFIG_FB_W100) += w100fb.o
-obj-$(CONFIG_FB_TMIO) += tmiofb.o
-obj-$(CONFIG_FB_AU1100) += au1100fb.o
-obj-$(CONFIG_FB_AU1200) += au1200fb.o
-obj-$(CONFIG_FB_VT8500) += vt8500lcdfb.o
-obj-$(CONFIG_FB_WM8505) += wm8505fb.o
-obj-$(CONFIG_FB_PMAG_AA) += pmag-aa-fb.o
-obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o
-obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o
-obj-$(CONFIG_FB_MAXINE) += maxinefb.o
-obj-$(CONFIG_FB_METRONOME) += metronomefb.o
-obj-$(CONFIG_FB_BROADSHEET) += broadsheetfb.o
-obj-$(CONFIG_FB_AUO_K190X) += auo_k190x.o
-obj-$(CONFIG_FB_AUO_K1900) += auo_k1900fb.o
-obj-$(CONFIG_FB_AUO_K1901) += auo_k1901fb.o
-obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o
-obj-$(CONFIG_FB_SH7760) += sh7760fb.o
-obj-$(CONFIG_FB_IMX) += imxfb.o
-obj-$(CONFIG_FB_S3C) += s3c-fb.o
-obj-$(CONFIG_FB_S3C2410) += s3c2410fb.o
-obj-$(CONFIG_FB_FSL_DIU) += fsl-diu-fb.o
-obj-$(CONFIG_FB_COBALT) += cobalt_lcdfb.o
-obj-$(CONFIG_FB_IBM_GXT4500) += gxt4500.o
-obj-$(CONFIG_FB_PS3) += ps3fb.o
-obj-$(CONFIG_FB_SM501) += sm501fb.o
-obj-$(CONFIG_FB_UDL) += udlfb.o
-obj-$(CONFIG_FB_SMSCUFX) += smscufx.o
-obj-$(CONFIG_FB_XILINX) += xilinxfb.o
-obj-$(CONFIG_SH_MIPI_DSI) += sh_mipi_dsi.o
-obj-$(CONFIG_FB_SH_MOBILE_HDMI) += sh_mobile_hdmi.o
-obj-$(CONFIG_FB_SH_MOBILE_MERAM) += sh_mobile_meram.o
-obj-$(CONFIG_FB_SH_MOBILE_LCDC) += sh_mobile_lcdcfb.o
-obj-$(CONFIG_FB_OMAP) += omap/
-obj-y += omap2/
-obj-$(CONFIG_XEN_FBDEV_FRONTEND) += xen-fbfront.o
-obj-$(CONFIG_FB_CARMINE) += carminefb.o
-obj-$(CONFIG_FB_MB862XX) += mb862xx/
-obj-$(CONFIG_FB_MSM) += msm/
-obj-$(CONFIG_FB_NUC900) += nuc900fb.o
-obj-$(CONFIG_FB_JZ4740) += jz4740_fb.o
-obj-$(CONFIG_FB_PUV3_UNIGFX) += fb-puv3.o
-obj-$(CONFIG_FB_HYPERV) += hyperv_fb.o
-obj-$(CONFIG_FB_OPENCORES) += ocfb.o
-
-# Platform or fallback drivers go here
-obj-$(CONFIG_FB_UVESA) += uvesafb.o
-obj-$(CONFIG_FB_VESA) += vesafb.o
-obj-$(CONFIG_FB_EFI) += efifb.o
-obj-$(CONFIG_FB_VGA16) += vga16fb.o
-obj-$(CONFIG_FB_OF) += offb.o
-obj-$(CONFIG_FB_BF537_LQ035) += bf537-lq035.o
-obj-$(CONFIG_FB_BF54X_LQ043) += bf54x-lq043fb.o
-obj-$(CONFIG_FB_BFIN_LQ035Q1) += bfin-lq035q1-fb.o
-obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin-t350mcqb-fb.o
-obj-$(CONFIG_FB_BFIN_7393) += bfin_adv7393fb.o
-obj-$(CONFIG_FB_MX3) += mx3fb.o
-obj-$(CONFIG_FB_DA8XX) += da8xx-fb.o
-obj-$(CONFIG_FB_MXS) += mxsfb.o
-obj-$(CONFIG_FB_SSD1307) += ssd1307fb.o
-obj-$(CONFIG_FB_SIMPLE) += simplefb.o
-
-# the test framebuffer is last
-obj-$(CONFIG_FB_VIRTUAL) += vfb.o
+obj-y += fbdev/
obj-$(CONFIG_VIDEOMODE_HELPERS) += display_timing.o videomode.o
ifeq ($(CONFIG_OF),y)
#include <asm/io.h>
-#include "../sticore.h"
+#include "../fbdev/sticore.h"
/* switching to graphics mode */
#define BLANK 0
#include <asm/cacheflush.h>
#include <asm/grfioctl.h>
-#include "../sticore.h"
+#include "../fbdev/sticore.h"
#define STI_DRIVERVERSION "Version 0.9b"
--- /dev/null
+#
+# fbdev configuration
+#
+
+menuconfig FB
+ tristate "Support for frame buffer devices"
+ ---help---
+ The frame buffer device provides an abstraction for the graphics
+ hardware. It represents the frame buffer of some video hardware and
+ allows application software to access the graphics hardware through
+ a well-defined interface, so the software doesn't need to know
+ anything about the low-level (hardware register) stuff.
+
+ Frame buffer devices work identically across the different
+ architectures supported by Linux and make the implementation of
+ application programs easier and more portable; at this point, an X
+ server exists which uses the frame buffer device exclusively.
+ On several non-X86 architectures, the frame buffer device is the
+ only way to use the graphics hardware.
+
+ The device is accessed through special device nodes, usually located
+ in the /dev directory, i.e. /dev/fb*.
+
+ You need an utility program called fbset to make full use of frame
+ buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
+ and the Framebuffer-HOWTO at
+ <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
+ information.
+
+ Say Y here and to the driver for your graphics board below if you
+ are compiling a kernel for a non-x86 architecture.
+
+ If you are compiling for the x86 architecture, you can say Y if you
+ want to play with it, but it is not essential. Please note that
+ running graphical applications that directly touch the hardware
+ (e.g. an accelerated X server) and that are not frame buffer
+ device-aware may cause unexpected results. If unsure, say N.
+
+config FIRMWARE_EDID
+ bool "Enable firmware EDID"
+ depends on FB
+ default n
+ ---help---
+ This enables access to the EDID transferred from the firmware.
+ On the i386, this is from the Video BIOS. Enable this if DDC/I2C
+ transfers do not work for your driver and if you are using
+ nvidiafb, i810fb or savagefb.
+
+ In general, choosing Y for this option is safe. If you
+ experience extremely long delays while booting before you get
+ something on your display, try setting this to N. Matrox cards in
+ combination with certain motherboards and monitors are known to
+ suffer from this problem.
+
+config FB_DDC
+ tristate
+ depends on FB
+ select I2C_ALGOBIT
+ select I2C
+ default n
+
+config FB_BOOT_VESA_SUPPORT
+ bool
+ depends on FB
+ default n
+ ---help---
+ If true, at least one selected framebuffer driver can take advantage
+ of VESA video modes set at an early boot stage via the vga= parameter.
+
+config FB_CFB_FILLRECT
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the cfb_fillrect function for generic software rectangle
+ filling. This is used by drivers that don't provide their own
+ (accelerated) version.
+
+config FB_CFB_COPYAREA
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the cfb_copyarea function for generic software area copying.
+ This is used by drivers that don't provide their own (accelerated)
+ version.
+
+config FB_CFB_IMAGEBLIT
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the cfb_imageblit function for generic software image
+ blitting. This is used by drivers that don't provide their own
+ (accelerated) version.
+
+config FB_CFB_REV_PIXELS_IN_BYTE
+ bool
+ depends on FB
+ default n
+ ---help---
+ Allow generic frame-buffer functions to work on displays with 1, 2
+ and 4 bits per pixel depths which has opposite order of pixels in
+ byte order to bytes in long order.
+
+config FB_SYS_FILLRECT
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the sys_fillrect function for generic software rectangle
+ filling. This is used by drivers that don't provide their own
+ (accelerated) version and the framebuffer is in system RAM.
+
+config FB_SYS_COPYAREA
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the sys_copyarea function for generic software area copying.
+ This is used by drivers that don't provide their own (accelerated)
+ version and the framebuffer is in system RAM.
+
+config FB_SYS_IMAGEBLIT
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the sys_imageblit function for generic software image
+ blitting. This is used by drivers that don't provide their own
+ (accelerated) version and the framebuffer is in system RAM.
+
+menuconfig FB_FOREIGN_ENDIAN
+ bool "Framebuffer foreign endianness support"
+ depends on FB
+ ---help---
+ This menu will let you enable support for the framebuffers with
+ non-native endianness (e.g. Little-Endian framebuffer on a
+ Big-Endian machine). Most probably you don't have such hardware,
+ so it's safe to say "n" here.
+
+choice
+ prompt "Choice endianness support"
+ depends on FB_FOREIGN_ENDIAN
+
+config FB_BOTH_ENDIAN
+ bool "Support for Big- and Little-Endian framebuffers"
+
+config FB_BIG_ENDIAN
+ bool "Support for Big-Endian framebuffers only"
+
+config FB_LITTLE_ENDIAN
+ bool "Support for Little-Endian framebuffers only"
+
+endchoice
+
+config FB_SYS_FOPS
+ tristate
+ depends on FB
+ default n
+
+config FB_DEFERRED_IO
+ bool
+ depends on FB
+
+config FB_HECUBA
+ tristate
+ depends on FB
+ depends on FB_DEFERRED_IO
+
+config FB_SVGALIB
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Common utility functions useful to fbdev drivers of VGA-based
+ cards.
+
+config FB_MACMODES
+ tristate
+ depends on FB
+ default n
+
+config FB_BACKLIGHT
+ bool
+ depends on FB
+ select BACKLIGHT_LCD_SUPPORT
+ select BACKLIGHT_CLASS_DEVICE
+ default n
+
+config FB_MODE_HELPERS
+ bool "Enable Video Mode Handling Helpers"
+ depends on FB
+ default n
+ ---help---
+ This enables functions for handling video modes using the
+ Generalized Timing Formula and the EDID parser. A few drivers rely
+ on this feature such as the radeonfb, rivafb, and the i810fb. If
+ your driver does not take advantage of this feature, choosing Y will
+ just increase the kernel size by about 5K.
+
+config FB_TILEBLITTING
+ bool "Enable Tile Blitting Support"
+ depends on FB
+ default n
+ ---help---
+ This enables tile blitting. Tile blitting is a drawing technique
+ where the screen is divided into rectangular sections (tiles), whereas
+ the standard blitting divides the screen into pixels. Because the
+ default drawing element is a tile, drawing functions will be passed
+ parameters in terms of number of tiles instead of number of pixels.
+ For example, to draw a single character, instead of using bitmaps,
+ an index to an array of bitmaps will be used. To clear or move a
+ rectangular section of a screen, the rectangle will be described in
+ terms of number of tiles in the x- and y-axis.
+
+ This is particularly important to one driver, matroxfb. If
+ unsure, say N.
+
+comment "Frame buffer hardware drivers"
+ depends on FB
+
+config FB_GRVGA
+ tristate "Aeroflex Gaisler framebuffer support"
+ depends on FB && SPARC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ This enables support for the SVGACTRL framebuffer in the GRLIB IP library from Aeroflex Gaisler.
+
+config FB_CIRRUS
+ tristate "Cirrus Logic support"
+ depends on FB && (ZORRO || PCI)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ This enables support for Cirrus Logic GD542x/543x based boards on
+ Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
+
+ If you have a PCI-based system, this enables support for these
+ chips: GD-543x, GD-544x, GD-5480.
+
+ Please read the file <file:Documentation/fb/cirrusfb.txt>.
+
+ Say N unless you have such a graphics board or plan to get one
+ before you next recompile the kernel.
+
+config FB_PM2
+ tristate "Permedia2 support"
+ depends on FB && ((AMIGA && BROKEN) || PCI)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for cards based on
+ the 3D Labs Permedia, Permedia 2 and Permedia 2V chips.
+ The driver was tested on the following cards:
+ Diamond FireGL 1000 PRO AGP
+ ELSA Gloria Synergy PCI
+ Appian Jeronimo PRO (both heads) PCI
+ 3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI
+ Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
+ ASK Graphic Blaster Exxtreme AGP
+
+ To compile this driver as a module, choose M here: the
+ module will be called pm2fb.
+
+config FB_PM2_FIFO_DISCONNECT
+ bool "enable FIFO disconnect feature"
+ depends on FB_PM2 && PCI
+ help
+ Support the Permedia2 FIFO disconnect feature.
+
+config FB_ARMCLCD
+ tristate "ARM PrimeCell PL110 support"
+ depends on ARM || ARM64 || COMPILE_TEST
+ depends on FB && ARM_AMBA
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This framebuffer device driver is for the ARM PrimeCell PL110
+ Colour LCD controller. ARM PrimeCells provide the building
+ blocks for System on a Chip devices.
+
+ If you want to compile this as a module (=code which can be
+ inserted into and removed from the running kernel), say M
+ here and read <file:Documentation/kbuild/modules.txt>. The module
+ will be called amba-clcd.
+
+config FB_ACORN
+ bool "Acorn VIDC support"
+ depends on (FB = y) && ARM && ARCH_ACORN
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the Acorn VIDC graphics
+ hardware found in Acorn RISC PCs and other ARM-based machines. If
+ unsure, say N.
+
+config FB_CLPS711X
+ bool "CLPS711X LCD support"
+ depends on (FB = y) && ARM && ARCH_CLPS711X
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ Say Y to enable the Framebuffer driver for the CLPS7111 and
+ EP7212 processors.
+
+config FB_SA1100
+ bool "SA-1100 LCD support"
+ depends on (FB = y) && ARM && ARCH_SA1100
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is a framebuffer device for the SA-1100 LCD Controller.
+ See <http://www.linux-fbdev.org/> for information on framebuffer
+ devices.
+
+ If you plan to use the LCD display with your SA-1100 system, say
+ Y here.
+
+config FB_IMX
+ tristate "Freescale i.MX1/21/25/27 LCD support"
+ depends on FB && ARCH_MXC
+ select BACKLIGHT_LCD_SUPPORT
+ select LCD_CLASS_DEVICE
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_MODE_HELPERS
+ select VIDEOMODE_HELPERS
+
+config FB_CYBER2000
+ tristate "CyberPro 2000/2010/5000 support"
+ depends on FB && PCI && (BROKEN || !SPARC64)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This enables support for the Integraphics CyberPro 20x0 and 5000
+ VGA chips used in the Rebel.com Netwinder and other machines.
+ Say Y if you have a NetWinder or a graphics card containing this
+ device, otherwise say N.
+
+config FB_CYBER2000_DDC
+ bool "DDC for CyberPro support"
+ depends on FB_CYBER2000
+ select FB_DDC
+ default y
+ help
+ Say Y here if you want DDC support for your CyberPro graphics
+ card. This is only I2C bus support, driver does not use EDID.
+
+config FB_CYBER2000_I2C
+ bool "CyberPro 2000/2010/5000 I2C support"
+ depends on FB_CYBER2000 && I2C && ARCH_NETWINDER
+ select I2C_ALGOBIT
+ help
+ Enable support for the I2C video decoder interface on the
+ Integraphics CyberPro 20x0 and 5000 VGA chips. This is used
+ on the Netwinder machines for the SAA7111 video capture.
+
+config FB_APOLLO
+ bool
+ depends on (FB = y) && APOLLO
+ default y
+ select FB_CFB_FILLRECT
+ select FB_CFB_IMAGEBLIT
+
+config FB_Q40
+ bool
+ depends on (FB = y) && Q40
+ default y
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+
+config FB_AMIGA
+ tristate "Amiga native chipset support"
+ depends on FB && AMIGA
+ help
+ This is the frame buffer device driver for the builtin graphics
+ chipset found in Amigas.
+
+ To compile this driver as a module, choose M here: the
+ module will be called amifb.
+
+config FB_AMIGA_OCS
+ bool "Amiga OCS chipset support"
+ depends on FB_AMIGA
+ help
+ This enables support for the original Agnus and Denise video chips,
+ found in the Amiga 1000 and most A500's and A2000's. If you intend
+ to run Linux on any of these systems, say Y; otherwise say N.
+
+config FB_AMIGA_ECS
+ bool "Amiga ECS chipset support"
+ depends on FB_AMIGA
+ help
+ This enables support for the Enhanced Chip Set, found in later
+ A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If
+ you intend to run Linux on any of these systems, say Y; otherwise
+ say N.
+
+config FB_AMIGA_AGA
+ bool "Amiga AGA chipset support"
+ depends on FB_AMIGA
+ help
+ This enables support for the Advanced Graphics Architecture (also
+ known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T
+ and CD32. If you intend to run Linux on any of these systems, say Y;
+ otherwise say N.
+
+config FB_FM2
+ bool "Amiga FrameMaster II/Rainbow II support"
+ depends on (FB = y) && ZORRO
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the Amiga FrameMaster
+ card from BSC (exhibited 1992 but not shipped as a CBM product).
+
+config FB_ARC
+ tristate "Arc Monochrome LCD board support"
+ depends on FB && X86
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ help
+ This enables support for the Arc Monochrome LCD board. The board
+ is based on the KS-108 lcd controller and is typically a matrix
+ of 2*n chips. This driver was tested with a 128x64 panel. This
+ driver supports it for use with x86 SBCs through a 16 bit GPIO
+ interface (8 bit data, 8 bit control). If you anticipate using
+ this driver, say Y or M; otherwise say N. You must specify the
+ GPIO IO address to be used for setting control and data.
+
+config FB_ATARI
+ bool "Atari native chipset support"
+ depends on (FB = y) && ATARI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the builtin graphics
+ chipset found in Ataris.
+
+config FB_OF
+ bool "Open Firmware frame buffer device support"
+ depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_MACMODES
+ help
+ Say Y if you want support with Open Firmware for your graphics
+ board.
+
+config FB_CONTROL
+ bool "Apple \"control\" display support"
+ depends on (FB = y) && PPC_PMAC && PPC32
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_MACMODES
+ help
+ This driver supports a frame buffer for the graphics adapter in the
+ Power Macintosh 7300 and others.
+
+config FB_PLATINUM
+ bool "Apple \"platinum\" display support"
+ depends on (FB = y) && PPC_PMAC && PPC32
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_MACMODES
+ help
+ This driver supports a frame buffer for the "platinum" graphics
+ adapter in some Power Macintoshes.
+
+config FB_VALKYRIE
+ bool "Apple \"valkyrie\" display support"
+ depends on (FB = y) && (MAC || (PPC_PMAC && PPC32))
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_MACMODES
+ help
+ This driver supports a frame buffer for the "valkyrie" graphics
+ adapter in some Power Macintoshes.
+
+config FB_CT65550
+ bool "Chips 65550 display support"
+ depends on (FB = y) && PPC32 && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the Chips & Technologies
+ 65550 graphics chip in PowerBooks.
+
+config FB_ASILIANT
+ bool "Asiliant (Chips) 69000 display support"
+ depends on (FB = y) && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the Asiliant 69030 chipset
+
+config FB_IMSTT
+ bool "IMS Twin Turbo display support"
+ depends on (FB = y) && PCI
+ select FB_CFB_IMAGEBLIT
+ select FB_MACMODES if PPC
+ help
+ The IMS Twin Turbo is a PCI-based frame buffer card bundled with
+ many Macintosh and compatible computers.
+
+config FB_VGA16
+ tristate "VGA 16-color graphics support"
+ depends on FB && (X86 || PPC)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select VGASTATE
+ select FONT_8x16 if FRAMEBUFFER_CONSOLE
+ help
+ This is the frame buffer device driver for VGA 16 color graphic
+ cards. Say Y if you have such a card.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vga16fb.
+
+config FB_BF54X_LQ043
+ tristate "SHARP LQ043 TFT LCD (BF548 EZKIT)"
+ depends on FB && (BF54x) && !BF542
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD
+
+config FB_BFIN_T350MCQB
+ tristate "Varitronix COG-T350MCQB TFT LCD display (BF527 EZKIT)"
+ depends on FB && BLACKFIN
+ select BFIN_GPTIMERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device driver for a Varitronix VL-PS-COG-T350MCQB-01 display TFT LCD
+ This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
+ It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
+
+config FB_BFIN_LQ035Q1
+ tristate "SHARP LQ035Q1DH02 TFT LCD"
+ depends on FB && BLACKFIN && SPI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select BFIN_GPTIMERS
+ help
+ This is the framebuffer device driver for a SHARP LQ035Q1DH02 TFT display found on
+ the Blackfin Landscape LCD EZ-Extender Card.
+ This display is a QVGA 320x240 18-bit RGB display interfaced by an 16-bit wide PPI
+ It uses PPI[0..15] PPI_FS1, PPI_FS2 and PPI_CLK.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bfin-lq035q1-fb.
+
+config FB_BF537_LQ035
+ tristate "SHARP LQ035 TFT LCD (BF537 STAMP)"
+ depends on FB && (BF534 || BF536 || BF537) && I2C_BLACKFIN_TWI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select BFIN_GPTIMERS
+ help
+ This is the framebuffer device for a SHARP LQ035Q7DB03 TFT LCD
+ attached to a BF537.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bf537-lq035.
+
+config FB_BFIN_7393
+ tristate "Blackfin ADV7393 Video encoder"
+ depends on FB && BLACKFIN
+ select I2C
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device for a ADV7393 video encoder
+ attached to a Blackfin on the PPI port.
+ If your Blackfin board has a ADV7393 select Y.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bfin_adv7393fb.
+
+choice
+ prompt "Video mode support"
+ depends on FB_BFIN_7393
+ default NTSC
+
+config NTSC
+ bool 'NTSC 720x480'
+
+config PAL
+ bool 'PAL 720x576'
+
+config NTSC_640x480
+ bool 'NTSC 640x480 (Experimental)'
+
+config PAL_640x480
+ bool 'PAL 640x480 (Experimental)'
+
+config NTSC_YCBCR
+ bool 'NTSC 720x480 YCbCR input'
+
+config PAL_YCBCR
+ bool 'PAL 720x576 YCbCR input'
+
+endchoice
+
+choice
+ prompt "Size of ADV7393 frame buffer memory Single/Double Size"
+ depends on (FB_BFIN_7393)
+ default ADV7393_1XMEM
+
+config ADV7393_1XMEM
+ bool 'Single'
+
+config ADV7393_2XMEM
+ bool 'Double'
+endchoice
+
+config FB_STI
+ tristate "HP STI frame buffer device support"
+ depends on FB && PARISC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select STI_CONSOLE
+ select VT
+ default y
+ ---help---
+ STI refers to the HP "Standard Text Interface" which is a set of
+ BIOS routines contained in a ROM chip in HP PA-RISC based machines.
+ Enabling this option will implement the linux framebuffer device
+ using calls to the STI BIOS routines for initialisation.
+
+ If you enable this option, you will get a planar framebuffer device
+ /dev/fb which will work on the most common HP graphic cards of the
+ NGLE family, including the artist chips (in the 7xx and Bxxx series),
+ HCRX, HCRX24, CRX, CRX24 and VisEG series.
+
+ It is safe to enable this option, so you should probably say "Y".
+
+config FB_MAC
+ bool "Generic Macintosh display support"
+ depends on (FB = y) && MAC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_MACMODES
+
+config FB_HP300
+ bool
+ depends on (FB = y) && DIO
+ select FB_CFB_IMAGEBLIT
+ default y
+
+config FB_TGA
+ tristate "TGA/SFB+ framebuffer support"
+ depends on FB && (ALPHA || TC)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select BITREVERSE
+ ---help---
+ This is the frame buffer device driver for generic TGA and SFB+
+ graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
+ also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
+ TURBOchannel cards, also known as PMAGD-A, -B and -C.
+
+ Due to hardware limitations ZLX-E2 and E3 cards are not supported
+ for DECstation 5000/200 systems. Additionally due to firmware
+ limitations these cards may cause troubles with booting DECstation
+ 5000/240 and /260 systems, but are fully supported under Linux if
+ you manage to get it going. ;-)
+
+ Say Y if you have one of those.
+
+config FB_UVESA
+ tristate "Userspace VESA VGA graphics support"
+ depends on FB && CONNECTOR
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_MODE_HELPERS
+ help
+ This is the frame buffer driver for generic VBE 2.0 compliant
+ graphic cards. It can also take advantage of VBE 3.0 features,
+ such as refresh rate adjustment.
+
+ This driver generally provides more features than vesafb but
+ requires a userspace helper application called 'v86d'. See
+ <file:Documentation/fb/uvesafb.txt> for more information.
+
+ If unsure, say N.
+
+config FB_VESA
+ bool "VESA VGA graphics support"
+ depends on (FB = y) && X86
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_BOOT_VESA_SUPPORT
+ help
+ This is the frame buffer device driver for generic VESA 2.0
+ compliant graphic cards. The older VESA 1.2 cards are not supported.
+ You will get a boot time penguin logo at no additional cost. Please
+ read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
+
+config FB_EFI
+ bool "EFI-based Framebuffer Support"
+ depends on (FB = y) && X86 && EFI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the EFI frame buffer device driver. If the firmware on
+ your platform is EFI 1.10 or UEFI 2.0, select Y to add support for
+ using the EFI framebuffer as your console.
+
+config FB_N411
+ tristate "N411 Apollo/Hecuba devkit support"
+ depends on FB && X86 && MMU
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
+ select FB_HECUBA
+ help
+ This enables support for the Apollo display controller in its
+ Hecuba form using the n411 devkit.
+
+config FB_HGA
+ tristate "Hercules mono graphics support"
+ depends on FB && X86
+ help
+ Say Y here if you have a Hercules mono graphics card.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hgafb.
+
+ As this card technology is at least 25 years old,
+ most people will answer N here.
+
+config FB_GBE
+ bool "SGI Graphics Backend frame buffer support"
+ depends on (FB = y) && SGI_IP32
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for SGI Graphics Backend.
+ This chip is used in SGI O2 and Visual Workstation 320/540.
+
+config FB_GBE_MEM
+ int "Video memory size in MB"
+ depends on FB_GBE
+ default 4
+ help
+ This is the amount of memory reserved for the framebuffer,
+ which can be any value between 1MB and 8MB.
+
+config FB_SBUS
+ bool "SBUS and UPA framebuffers"
+ depends on (FB = y) && SPARC
+ help
+ Say Y if you want support for SBUS or UPA based frame buffer device.
+
+config FB_BW2
+ bool "BWtwo support"
+ depends on (FB = y) && (SPARC && FB_SBUS)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the BWtwo frame buffer.
+
+config FB_CG3
+ bool "CGthree support"
+ depends on (FB = y) && (SPARC && FB_SBUS)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the CGthree frame buffer.
+
+config FB_CG6
+ bool "CGsix (GX,TurboGX) support"
+ depends on (FB = y) && (SPARC && FB_SBUS)
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the CGsix (GX, TurboGX)
+ frame buffer.
+
+config FB_FFB
+ bool "Creator/Creator3D/Elite3D support"
+ depends on FB_SBUS && SPARC64
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the Creator, Creator3D,
+ and Elite3D graphics boards.
+
+config FB_TCX
+ bool "TCX (SS4/SS5 only) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the TCX 24/8bit frame
+ buffer.
+
+config FB_CG14
+ bool "CGfourteen (SX) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the CGfourteen frame
+ buffer on Desktop SPARCsystems with the SX graphics option.
+
+config FB_P9100
+ bool "P9100 (Sparcbook 3 only) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the P9100 card
+ supported on Sparcbook 3 machines.
+
+config FB_LEO
+ bool "Leo (ZX) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the SBUS-based Sun ZX
+ (leo) frame buffer cards.
+
+config FB_IGA
+ bool "IGA 168x display support"
+ depends on (FB = y) && SPARC32
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device for the INTERGRAPHICS 1680 and
+ successor frame buffer cards.
+
+config FB_XVR500
+ bool "Sun XVR-500 3DLABS Wildcat support"
+ depends on (FB = y) && PCI && SPARC64
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device for the Sun XVR-500 and similar
+ graphics cards based upon the 3DLABS Wildcat chipset. The driver
+ only works on sparc64 systems where the system firmware has
+ mostly initialized the card already. It is treated as a
+ completely dumb framebuffer device.
+
+config FB_XVR2500
+ bool "Sun XVR-2500 3DLABS Wildcat support"
+ depends on (FB = y) && PCI && SPARC64
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device for the Sun XVR-2500 and similar
+ graphics cards based upon the 3DLABS Wildcat chipset. The driver
+ only works on sparc64 systems where the system firmware has
+ mostly initialized the card already. It is treated as a
+ completely dumb framebuffer device.
+
+config FB_XVR1000
+ bool "Sun XVR-1000 support"
+ depends on (FB = y) && SPARC64
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device for the Sun XVR-1000 and similar
+ graphics cards. The driver only works on sparc64 systems where
+ the system firmware has mostly initialized the card already. It
+ is treated as a completely dumb framebuffer device.
+
+config FB_PVR2
+ tristate "NEC PowerVR 2 display support"
+ depends on FB && SH_DREAMCAST
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Say Y here if you have a PowerVR 2 card in your box. If you plan to
+ run linux on your Dreamcast, you will have to say Y here.
+ This driver may or may not work on other PowerVR 2 cards, but is
+ totally untested. Use at your own risk. If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pvr2fb.
+
+ You can pass several parameters to the driver at boot time or at
+ module load time. The parameters look like "video=pvr2:XXX", where
+ the meaning of XXX can be found at the end of the main source file
+ (<file:drivers/video/pvr2fb.c>). Please see the file
+ <file:Documentation/fb/pvr2fb.txt>.
+
+config FB_OPENCORES
+ tristate "OpenCores VGA/LCD core 2.0 framebuffer support"
+ depends on FB && HAS_DMA
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This enables support for the OpenCores VGA/LCD core.
+
+ The OpenCores VGA/LCD core is typically used together with
+ softcore CPUs (e.g. OpenRISC or Microblaze) or hard processor
+ systems (e.g. Altera socfpga or Xilinx Zynq) on FPGAs.
+
+ The source code and specification for the core is available at
+ <http://opencores.org/project,vga_lcd>
+
+config FB_S1D13XXX
+ tristate "Epson S1D13XXX framebuffer support"
+ depends on FB
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ Support for S1D13XXX framebuffer device family (currently only
+ working with S1D13806). Product specs at
+ <http://vdc.epson.com/>
+
+config FB_ATMEL
+ tristate "AT91/AT32 LCD Controller support"
+ depends on FB && HAVE_FB_ATMEL
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_MODE_HELPERS
+ select VIDEOMODE_HELPERS
+ help
+ This enables support for the AT91/AT32 LCD Controller.
+
+config FB_INTSRAM
+ bool "Frame Buffer in internal SRAM"
+ depends on FB_ATMEL && ARCH_AT91SAM9261
+ help
+ Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
+ to let frame buffer in external SDRAM.
+
+config FB_ATMEL_STN
+ bool "Use a STN display with AT91/AT32 LCD Controller"
+ depends on FB_ATMEL && (MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK)
+ default n
+ help
+ Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
+ Controller. Say N if you want to connect a TFT.
+
+ If unsure, say N.
+
+config FB_NVIDIA
+ tristate "nVidia Framebuffer Support"
+ depends on FB && PCI
+ select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT
+ select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select BITREVERSE
+ select VGASTATE
+ help
+ This driver supports graphics boards with the nVidia chips, TNT
+ and newer. For very old chipsets, such as the RIVA128, then use
+ the rivafb.
+ Say Y if you have such a graphics board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called nvidiafb.
+
+config FB_NVIDIA_I2C
+ bool "Enable DDC Support"
+ depends on FB_NVIDIA
+ select FB_DDC
+ help
+ This enables I2C support for nVidia Chipsets. This is used
+ only for getting EDID information from the attached display
+ allowing for robust video mode handling and switching.
+
+ Because fbdev-2.6 requires that drivers must be able to
+ independently validate video mode parameters, you should say Y
+ here.
+
+config FB_NVIDIA_DEBUG
+ bool "Lots of debug output"
+ depends on FB_NVIDIA
+ default n
+ help
+ Say Y here if you want the nVidia driver to output all sorts
+ of debugging information to provide to the maintainer when
+ something goes wrong.
+
+config FB_NVIDIA_BACKLIGHT
+ bool "Support for backlight control"
+ depends on FB_NVIDIA
+ default y
+ help
+ Say Y here if you want to control the backlight of your display.
+
+config FB_RIVA
+ tristate "nVidia Riva support"
+ depends on FB && PCI
+ select FB_BACKLIGHT if FB_RIVA_BACKLIGHT
+ select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select BITREVERSE
+ select VGASTATE
+ help
+ This driver supports graphics boards with the nVidia Riva/Geforce
+ chips.
+ Say Y if you have such a graphics board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rivafb.
+
+config FB_RIVA_I2C
+ bool "Enable DDC Support"
+ depends on FB_RIVA
+ select FB_DDC
+ help
+ This enables I2C support for nVidia Chipsets. This is used
+ only for getting EDID information from the attached display
+ allowing for robust video mode handling and switching.
+
+ Because fbdev-2.6 requires that drivers must be able to
+ independently validate video mode parameters, you should say Y
+ here.
+
+config FB_RIVA_DEBUG
+ bool "Lots of debug output"
+ depends on FB_RIVA
+ default n
+ help
+ Say Y here if you want the Riva driver to output all sorts
+ of debugging information to provide to the maintainer when
+ something goes wrong.
+
+config FB_RIVA_BACKLIGHT
+ bool "Support for backlight control"
+ depends on FB_RIVA
+ default y
+ help
+ Say Y here if you want to control the backlight of your display.
+
+config FB_I740
+ tristate "Intel740 support"
+ depends on FB && PCI
+ select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select VGASTATE
+ select FB_DDC
+ help
+ This driver supports graphics cards based on Intel740 chip.
+
+config FB_I810
+ tristate "Intel 810/815 support"
+ depends on FB && PCI && X86_32 && AGP_INTEL
+ select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select VGASTATE
+ help
+ This driver supports the on-board graphics built in to the Intel 810
+ and 815 chipsets. Say Y if you have and plan to use such a board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called i810fb.
+
+ For more information, please read
+ <file:Documentation/fb/intel810.txt>
+
+config FB_I810_GTF
+ bool "use VESA Generalized Timing Formula"
+ depends on FB_I810
+ help
+ If you say Y, then the VESA standard, Generalized Timing Formula
+ or GTF, will be used to calculate the required video timing values
+ per video mode. Since the GTF allows nondiscrete timings
+ (nondiscrete being a range of values as opposed to discrete being a
+ set of values), you'll be able to use any combination of horizontal
+ and vertical resolutions, and vertical refresh rates without having
+ to specify your own timing parameters. This is especially useful
+ to maximize the performance of an aging display, or if you just
+ have a display with nonstandard dimensions. A VESA compliant
+ monitor is recommended, but can still work with non-compliant ones.
+ If you need or want this, then select this option. The timings may
+ not be compliant with Intel's recommended values. Use at your own
+ risk.
+
+ If you say N, the driver will revert to discrete video timings
+ using a set recommended by Intel in their documentation.
+
+ If unsure, say N.
+
+config FB_I810_I2C
+ bool "Enable DDC Support"
+ depends on FB_I810 && FB_I810_GTF
+ select FB_DDC
+ help
+
+config FB_LE80578
+ tristate "Intel LE80578 (Vermilion) support"
+ depends on FB && PCI && X86
+ select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This driver supports the LE80578 (Vermilion Range) chipset
+
+config FB_CARILLO_RANCH
+ tristate "Intel Carillo Ranch support"
+ depends on FB_LE80578 && FB && PCI && X86
+ help
+ This driver supports the LE80578 (Carillo Ranch) board
+
+config FB_INTEL
+ tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support"
+ depends on FB && PCI && X86 && AGP_INTEL && EXPERT
+ select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_BOOT_VESA_SUPPORT if FB_INTEL = y
+ depends on !DRM_I915
+ help
+ This driver supports the on-board graphics built in to the Intel
+ 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
+ Say Y if you have and plan to use such a board.
+
+ To make FB_INTELFB=Y work you need to say AGP_INTEL=y too.
+
+ To compile this driver as a module, choose M here: the
+ module will be called intelfb.
+
+ For more information, please read <file:Documentation/fb/intelfb.txt>
+
+config FB_INTEL_DEBUG
+ bool "Intel driver Debug Messages"
+ depends on FB_INTEL
+ ---help---
+ Say Y here if you want the Intel driver to output all sorts
+ of debugging information to provide to the maintainer when
+ something goes wrong.
+
+config FB_INTEL_I2C
+ bool "DDC/I2C for Intel framebuffer support"
+ depends on FB_INTEL
+ select FB_DDC
+ default y
+ help
+ Say Y here if you want DDC/I2C support for your on-board Intel graphics.
+
+config FB_MATROX
+ tristate "Matrox acceleration"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_TILEBLITTING
+ select FB_MACMODES if PPC_PMAC
+ ---help---
+ Say Y here if you have a Matrox Millennium, Matrox Millennium II,
+ Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
+ Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,
+ Matrox G400, G450 or G550 card in your box.
+
+ To compile this driver as a module, choose M here: the
+ module will be called matroxfb.
+
+ You can pass several parameters to the driver at boot time or at
+ module load time. The parameters look like "video=matroxfb:XXX", and
+ are described in <file:Documentation/fb/matroxfb.txt>.
+
+config FB_MATROX_MILLENIUM
+ bool "Millennium I/II support"
+ depends on FB_MATROX
+ help
+ Say Y here if you have a Matrox Millennium or Matrox Millennium II
+ video card. If you select "Advanced lowlevel driver options" below,
+ you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp
+ packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can
+ also use font widths different from 8.
+
+config FB_MATROX_MYSTIQUE
+ bool "Mystique support"
+ depends on FB_MATROX
+ help
+ Say Y here if you have a Matrox Mystique or Matrox Mystique 220
+ video card. If you select "Advanced lowlevel driver options" below,
+ you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp
+ packed pixel and 32 bpp packed pixel. You can also use font widths
+ different from 8.
+
+config FB_MATROX_G
+ bool "G100/G200/G400/G450/G550 support"
+ depends on FB_MATROX
+ ---help---
+ Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
+ video card. If you select "Advanced lowlevel driver options", you
+ should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
+ pixel and 32 bpp packed pixel. You can also use font widths
+ different from 8.
+
+ If you need support for G400 secondary head, you must say Y to
+ "Matrox I2C support" and "G400 second head support" right below.
+ G450/G550 secondary head and digital output are supported without
+ additional modules.
+
+ The driver starts in monitor mode. You must use the matroxset tool
+ (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
+ swap primary and secondary head outputs, or to change output mode.
+ Secondary head driver always start in 640x480 resolution and you
+ must use fbset to change it.
+
+ Do not forget that second head supports only 16 and 32 bpp
+ packed pixels, so it is a good idea to compile them into the kernel
+ too. You can use only some font widths, as the driver uses generic
+ painting procedures (the secondary head does not use acceleration
+ engine).
+
+ G450/G550 hardware can display TV picture only from secondary CRTC,
+ and it performs no scaling, so picture must have 525 or 625 lines.
+
+config FB_MATROX_I2C
+ tristate "Matrox I2C support"
+ depends on FB_MATROX
+ select FB_DDC
+ ---help---
+ This drivers creates I2C buses which are needed for accessing the
+ DDC (I2C) bus present on all Matroxes, an I2C bus which
+ interconnects Matrox optional devices, like MGA-TVO on G200 and
+ G400, and the secondary head DDC bus, present on G400 only.
+
+ You can say Y or M here if you want to experiment with monitor
+ detection code. You must say Y or M here if you want to use either
+ second head of G400 or MGA-TVO on G200 or G400.
+
+ If you compile it as module, it will create a module named
+ i2c-matroxfb.
+
+config FB_MATROX_MAVEN
+ tristate "G400 second head support"
+ depends on FB_MATROX_G && FB_MATROX_I2C
+ ---help---
+ WARNING !!! This support does not work with G450 !!!
+
+ Say Y or M here if you want to use a secondary head (meaning two
+ monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
+ head is not compatible with accelerated XFree 3.3.x SVGA servers -
+ secondary head output is blanked while you are in X. With XFree
+ 3.9.17 preview you can use both heads if you use SVGA over fbdev or
+ the fbdev driver on first head and the fbdev driver on second head.
+
+ If you compile it as module, two modules are created,
+ matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for
+ both G200 and G400, matroxfb_crtc2 is needed only by G400. You must
+ also load i2c-matroxfb to get it to run.
+
+ The driver starts in monitor mode and you must use the matroxset
+ tool (available at
+ <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
+ PAL or NTSC or to swap primary and secondary head outputs.
+ Secondary head driver also always start in 640x480 resolution, you
+ must use fbset to change it.
+
+ Also do not forget that second head supports only 16 and 32 bpp
+ packed pixels, so it is a good idea to compile them into the kernel
+ too. You can use only some font widths, as the driver uses generic
+ painting procedures (the secondary head does not use acceleration
+ engine).
+
+config FB_RADEON
+ tristate "ATI Radeon display support"
+ depends on FB && PCI
+ select FB_BACKLIGHT if FB_RADEON_BACKLIGHT
+ select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_MACMODES if PPC_OF
+ help
+ Choose this option if you want to use an ATI Radeon graphics card as
+ a framebuffer device. There are both PCI and AGP versions. You
+ don't need to choose this to run the Radeon in plain VGA mode.
+
+ There is a product page at
+ http://products.amd.com/en-us/GraphicCardResult.aspx
+
+config FB_RADEON_I2C
+ bool "DDC/I2C for ATI Radeon support"
+ depends on FB_RADEON
+ select FB_DDC
+ default y
+ help
+ Say Y here if you want DDC/I2C support for your Radeon board.
+
+config FB_RADEON_BACKLIGHT
+ bool "Support for backlight control"
+ depends on FB_RADEON
+ default y
+ help
+ Say Y here if you want to control the backlight of your display.
+
+config FB_RADEON_DEBUG
+ bool "Lots of debug output from Radeon driver"
+ depends on FB_RADEON
+ default n
+ help
+ Say Y here if you want the Radeon driver to output all sorts
+ of debugging information to provide to the maintainer when
+ something goes wrong.
+
+config FB_ATY128
+ tristate "ATI Rage128 display support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_BACKLIGHT if FB_ATY128_BACKLIGHT
+ select FB_MACMODES if PPC_PMAC
+ help
+ This driver supports graphics boards with the ATI Rage128 chips.
+ Say Y if you have such a graphics board and read
+ <file:Documentation/fb/aty128fb.txt>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called aty128fb.
+
+config FB_ATY128_BACKLIGHT
+ bool "Support for backlight control"
+ depends on FB_ATY128
+ default y
+ help
+ Say Y here if you want to control the backlight of your display.
+
+config FB_ATY
+ tristate "ATI Mach64 display support" if PCI || ATARI
+ depends on FB && !SPARC32
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_BACKLIGHT if FB_ATY_BACKLIGHT
+ select FB_MACMODES if PPC
+ help
+ This driver supports graphics boards with the ATI Mach64 chips.
+ Say Y if you have such a graphics board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called atyfb.
+
+config FB_ATY_CT
+ bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
+ depends on PCI && FB_ATY
+ default y if SPARC64 && PCI
+ help
+ Say Y here to support use of ATI's 64-bit Rage boards (or other
+ boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
+ framebuffer device. The ATI product support page for these boards
+ is at <http://support.ati.com/products/pc/mach64/mach64.html>.
+
+config FB_ATY_GENERIC_LCD
+ bool "Mach64 generic LCD support"
+ depends on FB_ATY_CT
+ help
+ Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
+ Rage XC, or Rage XL chipset.
+
+config FB_ATY_GX
+ bool "Mach64 GX support" if PCI
+ depends on FB_ATY
+ default y if ATARI
+ help
+ Say Y here to support use of the ATI Mach64 Graphics Expression
+ board (or other boards based on the Mach64 GX chipset) as a
+ framebuffer device. The ATI product support page for these boards
+ is at
+ <http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
+
+config FB_ATY_BACKLIGHT
+ bool "Support for backlight control"
+ depends on FB_ATY
+ default y
+ help
+ Say Y here if you want to control the backlight of your display.
+
+config FB_S3
+ tristate "S3 Trio/Virge support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_TILEBLITTING
+ select FB_SVGALIB
+ select VGASTATE
+ select FONT_8x16 if FRAMEBUFFER_CONSOLE
+ ---help---
+ Driver for graphics boards with S3 Trio / S3 Virge chip.
+
+config FB_S3_DDC
+ bool "DDC for S3 support"
+ depends on FB_S3
+ select FB_DDC
+ default y
+ help
+ Say Y here if you want DDC support for your S3 graphics card.
+
+config FB_SAVAGE
+ tristate "S3 Savage support"
+ depends on FB && PCI
+ select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select VGASTATE
+ help
+ This driver supports notebooks and computers with S3 Savage PCI/AGP
+ chips.
+
+ Say Y if you have such a graphics card.
+
+ To compile this driver as a module, choose M here; the module
+ will be called savagefb.
+
+config FB_SAVAGE_I2C
+ bool "Enable DDC2 Support"
+ depends on FB_SAVAGE
+ select FB_DDC
+ help
+ This enables I2C support for S3 Savage Chipsets. This is used
+ only for getting EDID information from the attached display
+ allowing for robust video mode handling and switching.
+
+ Because fbdev-2.6 requires that drivers must be able to
+ independently validate video mode parameters, you should say Y
+ here.
+
+config FB_SAVAGE_ACCEL
+ bool "Enable Console Acceleration"
+ depends on FB_SAVAGE
+ default n
+ help
+ This option will compile in console acceleration support. If
+ the resulting framebuffer console has bothersome glitches, then
+ choose N here.
+
+config FB_SIS
+ tristate "SiS/XGI display support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_BOOT_VESA_SUPPORT if FB_SIS = y
+ help
+ This is the frame buffer device driver for the SiS 300, 315, 330
+ and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
+ Specs available at <http://www.sis.com> and <http://www.xgitech.com>.
+
+ To compile this driver as a module, choose M here; the module
+ will be called sisfb.
+
+config FB_SIS_300
+ bool "SiS 300 series support"
+ depends on FB_SIS
+ help
+ Say Y here to support use of the SiS 300/305, 540, 630 and 730.
+
+config FB_SIS_315
+ bool "SiS 315/330/340 series and XGI support"
+ depends on FB_SIS
+ help
+ Say Y here to support use of the SiS 315, 330 and 340 series
+ (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well
+ as XGI V3XT, V5, V8 and Z7.
+
+config FB_VIA
+ tristate "VIA UniChrome (Pro) and Chrome9 display support"
+ depends on FB && PCI && X86
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select I2C_ALGOBIT
+ select I2C
+ select GPIOLIB
+ help
+ This is the frame buffer device driver for Graphics chips of VIA
+ UniChrome (Pro) Family (CLE266,PM800/CN400,P4M800CE/P4M800Pro/
+ CN700/VN800,CX700/VX700,P4M890) and Chrome9 Family (K8M890,CN896
+ /P4M900,VX800)
+ Say Y if you have a VIA UniChrome graphics board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called viafb.
+
+if FB_VIA
+
+config FB_VIA_DIRECT_PROCFS
+ bool "direct hardware access via procfs (DEPRECATED)(DANGEROUS)"
+ depends on FB_VIA
+ default n
+ help
+ Allow direct hardware access to some output registers via procfs.
+ This is dangerous but may provide the only chance to get the
+ correct output device configuration.
+ Its use is strongly discouraged.
+
+config FB_VIA_X_COMPATIBILITY
+ bool "X server compatibility"
+ depends on FB_VIA
+ default n
+ help
+ This option reduces the functionality (power saving, ...) of the
+ framebuffer to avoid negative impact on the OpenChrome X server.
+ If you use any X server other than fbdev you should enable this
+ otherwise it should be safe to disable it and allow using all
+ features.
+
+endif
+
+config FB_NEOMAGIC
+ tristate "NeoMagic display support"
+ depends on FB && PCI
+ select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select VGASTATE
+ help
+ This driver supports notebooks with NeoMagic PCI chips.
+ Say Y if you have such a graphics card.
+
+ To compile this driver as a module, choose M here: the
+ module will be called neofb.
+
+config FB_KYRO
+ tristate "IMG Kyro support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
+ graphics board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called kyrofb.
+
+config FB_3DFX
+ tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support"
+ depends on FB && PCI
+ select FB_CFB_IMAGEBLIT
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_MODE_HELPERS
+ help
+ This driver supports graphics boards with the 3Dfx Banshee,
+ Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
+ such a graphics board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tdfxfb.
+
+config FB_3DFX_ACCEL
+ bool "3Dfx Acceleration functions"
+ depends on FB_3DFX
+ ---help---
+ This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
+ device driver with acceleration functions.
+
+config FB_3DFX_I2C
+ bool "Enable DDC/I2C support"
+ depends on FB_3DFX
+ select FB_DDC
+ default y
+ help
+ Say Y here if you want DDC/I2C support for your 3dfx Voodoo3.
+
+config FB_VOODOO1
+ tristate "3Dfx Voodoo Graphics (sst1) support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or
+ Voodoo2 (cvg) based graphics card.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sstfb.
+
+ WARNING: Do not use any application that uses the 3D engine
+ (namely glide) while using this driver.
+ Please read the <file:Documentation/fb/sstfb.txt> for supported
+ options and other important info support.
+
+config FB_VT8623
+ tristate "VIA VT8623 support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_TILEBLITTING
+ select FB_SVGALIB
+ select VGASTATE
+ select FONT_8x16 if FRAMEBUFFER_CONSOLE
+ ---help---
+ Driver for CastleRock integrated graphics core in the
+ VIA VT8623 [Apollo CLE266] chipset.
+
+config FB_TRIDENT
+ tristate "Trident/CyberXXX/CyberBlade support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ This is the frame buffer device driver for Trident PCI/AGP chipsets.
+ Supported chipset families are TGUI 9440/96XX, 3DImage, Blade3D
+ and Blade XP.
+ There are also integrated versions of these chips called CyberXXXX,
+ CyberImage or CyberBlade. These chips are mostly found in laptops
+ but also on some motherboards including early VIA EPIA motherboards.
+ For more information, read <file:Documentation/fb/tridentfb.txt>
+
+ Say Y if you have such a graphics board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tridentfb.
+
+config FB_ARK
+ tristate "ARK 2000PV support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_TILEBLITTING
+ select FB_SVGALIB
+ select VGASTATE
+ select FONT_8x16 if FRAMEBUFFER_CONSOLE
+ ---help---
+ Driver for PCI graphics boards with ARK 2000PV chip
+ and ICS 5342 RAMDAC.
+
+config FB_PM3
+ tristate "Permedia3 support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the 3DLabs Permedia3
+ chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
+ similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
+ and maybe other boards.
+
+config FB_CARMINE
+ tristate "Fujitsu carmine frame buffer support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the Fujitsu Carmine chip.
+ The driver provides two independent frame buffer devices.
+
+choice
+ depends on FB_CARMINE
+ prompt "DRAM timing"
+ default FB_CARMINE_DRAM_EVAL
+
+config FB_CARMINE_DRAM_EVAL
+ bool "Eval board timings"
+ help
+ Use timings which work on the eval card.
+
+config CARMINE_DRAM_CUSTOM
+ bool "Custom board timings"
+ help
+ Use custom board timings.
+endchoice
+
+config FB_AU1100
+ bool "Au1100 LCD Driver"
+ depends on (FB = y) && MIPS_ALCHEMY
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer driver for the AMD Au1100 SOC. It can drive
+ various panels and CRTs by passing in kernel cmd line option
+ au1100fb:panel=<name>.
+
+config FB_AU1200
+ bool "Au1200/Au1300 LCD Driver"
+ depends on (FB = y) && MIPS_ALCHEMY
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ help
+ This is the framebuffer driver for the Au1200/Au1300 SOCs.
+ It can drive various panels and CRTs by passing in kernel cmd line
+ option au1200fb:panel=<name>.
+
+config FB_VT8500
+ bool "VIA VT8500 framebuffer support"
+ depends on (FB = y) && ARM && ARCH_VT8500
+ select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
+ select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
+ select FB_SYS_IMAGEBLIT
+ select FB_MODE_HELPERS
+ select VIDEOMODE_HELPERS
+ help
+ This is the framebuffer driver for VIA VT8500 integrated LCD
+ controller.
+
+config FB_WM8505
+ bool "Wondermedia WM8xxx-series frame buffer support"
+ depends on (FB = y) && ARM && ARCH_VT8500
+ select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
+ select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
+ select FB_SYS_IMAGEBLIT
+ select FB_MODE_HELPERS
+ select VIDEOMODE_HELPERS
+ help
+ This is the framebuffer driver for WonderMedia WM8xxx-series
+ integrated LCD controller. This driver covers the WM8505, WM8650
+ and WM8850 SoCs.
+
+config FB_WMT_GE_ROPS
+ bool "VT8500/WM8xxx accelerated raster ops support"
+ depends on (FB = y) && (FB_VT8500 || FB_WM8505)
+ default n
+ help
+ This adds support for accelerated raster operations on the
+ VIA VT8500 and Wondermedia 85xx series SoCs.
+
+source "drivers/video/fbdev/geode/Kconfig"
+
+config FB_HIT
+ tristate "HD64461 Frame Buffer support"
+ depends on FB && HD64461
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the Hitachi HD64461 LCD
+ frame buffer card.
+
+config FB_PMAG_AA
+ bool "PMAG-AA TURBOchannel framebuffer support"
+ depends on (FB = y) && TC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
+ used mainly in the MIPS-based DECstation series.
+
+config FB_PMAG_BA
+ tristate "PMAG-BA TURBOchannel framebuffer support"
+ depends on FB && TC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
+ used mainly in the MIPS-based DECstation series.
+
+config FB_PMAGB_B
+ tristate "PMAGB-B TURBOchannel framebuffer support"
+ depends on FB && TC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ Support for the PMAGB-B TURBOchannel framebuffer card used mainly
+ in the MIPS-based DECstation series. The card is currently only
+ supported in 1280x1024x8 mode.
+
+config FB_MAXINE
+ bool "Maxine (Personal DECstation) onboard framebuffer support"
+ depends on (FB = y) && MACH_DECSTATION
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ Support for the onboard framebuffer (1024x768x8) in the Personal
+ DECstation series (Personal DECstation 5000/20, /25, /33, /50,
+ Codename "Maxine").
+
+config FB_G364
+ bool "G364 frame buffer support"
+ depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ The G364 driver is the framebuffer used in MIPS Magnum 4000 and
+ Olivetti M700-10 systems.
+
+config FB_68328
+ bool "Motorola 68328 native frame buffer support"
+ depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ Say Y here if you want to support the built-in frame buffer of
+ the Motorola 68328 CPU family.
+
+config FB_PXA168
+ tristate "PXA168/910 LCD framebuffer support"
+ depends on FB && (CPU_PXA168 || CPU_PXA910)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Frame buffer driver for the built-in LCD controller in the Marvell
+ MMP processor.
+
+config FB_PXA
+ tristate "PXA LCD framebuffer support"
+ depends on FB && ARCH_PXA
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Frame buffer driver for the built-in LCD controller in the Intel
+ PXA2x0 processor.
+
+ This driver is also available as a module ( = code which can be
+ inserted and removed from the running kernel whenever you want). The
+ module will be called pxafb. If you want to compile it as a module,
+ say M here and read <file:Documentation/kbuild/modules.txt>.
+
+ If unsure, say N.
+
+config FB_PXA_OVERLAY
+ bool "Support PXA27x/PXA3xx Overlay(s) as framebuffer"
+ default n
+ depends on FB_PXA && (PXA27x || PXA3xx)
+
+config FB_PXA_SMARTPANEL
+ bool "PXA Smartpanel LCD support"
+ default n
+ depends on FB_PXA
+
+config FB_PXA_PARAMETERS
+ bool "PXA LCD command line parameters"
+ default n
+ depends on FB_PXA
+ ---help---
+ Enable the use of kernel command line or module parameters
+ to configure the physical properties of the LCD panel when
+ using the PXA LCD driver.
+
+ This option allows you to override the panel parameters
+ supplied by the platform in order to support multiple
+ different models of flatpanel. If you will only be using a
+ single model of flatpanel then you can safely leave this
+ option disabled.
+
+ <file:Documentation/fb/pxafb.txt> describes the available parameters.
+
+config PXA3XX_GCU
+ tristate "PXA3xx 2D graphics accelerator driver"
+ depends on FB_PXA
+ help
+ Kernelspace driver for the 2D graphics controller unit (GCU)
+ found on PXA3xx processors. There is a counterpart driver in the
+ DirectFB suite, see http://www.directfb.org/
+
+ If you compile this as a module, it will be called pxa3xx_gcu.
+
+config FB_MBX
+ tristate "2700G LCD framebuffer support"
+ depends on FB && ARCH_PXA
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Framebuffer driver for the Intel 2700G (Marathon) Graphics
+ Accelerator
+
+config FB_MBX_DEBUG
+ bool "Enable debugging info via debugfs"
+ depends on FB_MBX && DEBUG_FS
+ default n
+ ---help---
+ Enable this if you want debugging information using the debug
+ filesystem (debugfs)
+
+ If unsure, say N.
+
+config FB_FSL_DIU
+ tristate "Freescale DIU framebuffer support"
+ depends on FB && FSL_SOC
+ select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select PPC_LIB_RHEAP
+ ---help---
+ Framebuffer driver for the Freescale SoC DIU
+
+config FB_W100
+ tristate "W100 frame buffer support"
+ depends on FB && ARCH_PXA
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
+ It can also drive the w3220 chip found on iPAQ hx4700.
+
+ This driver is also available as a module ( = code which can be
+ inserted and removed from the running kernel whenever you want). The
+ module will be called w100fb. If you want to compile it as a module,
+ say M here and read <file:Documentation/kbuild/modules.txt>.
+
+ If unsure, say N.
+
+config FB_SH_MOBILE_LCDC
+ tristate "SuperH Mobile LCDC framebuffer support"
+ depends on FB && (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
+ select FB_BACKLIGHT
+ select SH_MIPI_DSI if SH_LCD_MIPI_DSI
+ ---help---
+ Frame buffer driver for the on-chip SH-Mobile LCD controller.
+
+config FB_SH_MOBILE_HDMI
+ tristate "SuperH Mobile HDMI controller support"
+ depends on FB_SH_MOBILE_LCDC
+ select FB_MODE_HELPERS
+ select SOUND
+ select SND
+ select SND_SOC
+ ---help---
+ Driver for the on-chip SH-Mobile HDMI controller.
+
+config FB_TMIO
+ tristate "Toshiba Mobile IO FrameBuffer support"
+ depends on FB && MFD_CORE
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Frame buffer driver for the Toshiba Mobile IO integrated as found
+ on the Sharp SL-6000 series
+
+ This driver is also available as a module ( = code which can be
+ inserted and removed from the running kernel whenever you want). The
+ module will be called tmiofb. If you want to compile it as a module,
+ say M here and read <file:Documentation/kbuild/modules.txt>.
+
+ If unsure, say N.
+
+config FB_TMIO_ACCELL
+ bool "tmiofb acceleration"
+ depends on FB_TMIO
+ default y
+
+config FB_S3C
+ tristate "Samsung S3C framebuffer support"
+ depends on FB && (CPU_S3C2416 || ARCH_S3C64XX || ARCH_S5P64X0 || \
+ ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Frame buffer driver for the built-in FB controller in the Samsung
+ SoC line from the S3C2443 onwards, including the S3C2416, S3C2450,
+ and the S3C64XX series such as the S3C6400 and S3C6410.
+
+ These chips all have the same basic framebuffer design with the
+ actual capabilities depending on the chip. For instance the S3C6400
+ and S3C6410 support 4 hardware windows whereas the S3C24XX series
+ currently only have two.
+
+ Currently the support is only for the S3C6400 and S3C6410 SoCs.
+
+config FB_S3C_DEBUG_REGWRITE
+ bool "Debug register writes"
+ depends on FB_S3C
+ ---help---
+ Show all register writes via pr_debug()
+
+config FB_S3C2410
+ tristate "S3C2410 LCD framebuffer support"
+ depends on FB && ARCH_S3C24XX
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Frame buffer driver for the built-in LCD controller in the Samsung
+ S3C2410 processor.
+
+ This driver is also available as a module ( = code which can be
+ inserted and removed from the running kernel whenever you want). The
+ module will be called s3c2410fb. If you want to compile it as a module,
+ say M here and read <file:Documentation/kbuild/modules.txt>.
+
+ If unsure, say N.
+config FB_S3C2410_DEBUG
+ bool "S3C2410 lcd debug messages"
+ depends on FB_S3C2410
+ help
+ Turn on debugging messages. Note that you can set/unset at run time
+ through sysfs
+
+config FB_NUC900
+ bool "NUC900 LCD framebuffer support"
+ depends on FB && ARCH_W90X900
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Frame buffer driver for the built-in LCD controller in the Nuvoton
+ NUC900 processor
+
+config GPM1040A0_320X240
+ bool "Giantplus Technology GPM1040A0 320x240 Color TFT LCD"
+ depends on FB_NUC900
+
+config FB_SM501
+ tristate "Silicon Motion SM501 framebuffer support"
+ depends on FB && MFD_SM501
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Frame buffer driver for the CRT and LCD controllers in the Silicon
+ Motion SM501.
+
+ This driver is also available as a module ( = code which can be
+ inserted and removed from the running kernel whenever you want). The
+ module will be called sm501fb. If you want to compile it as a module,
+ say M here and read <file:Documentation/kbuild/modules.txt>.
+
+ If unsure, say N.
+
+config FB_SMSCUFX
+ tristate "SMSC UFX6000/7000 USB Framebuffer support"
+ depends on FB && USB
+ select FB_MODE_HELPERS
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
+ ---help---
+ This is a kernel framebuffer driver for SMSC UFX USB devices.
+ Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
+ mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
+ (USB 3.0) devices.
+ To compile as a module, choose M here: the module name is smscufx.
+
+config FB_UDL
+ tristate "Displaylink USB Framebuffer support"
+ depends on FB && USB
+ select FB_MODE_HELPERS
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
+ ---help---
+ This is a kernel framebuffer driver for DisplayLink USB devices.
+ Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
+ mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
+ To compile as a module, choose M here: the module name is udlfb.
+
+config FB_IBM_GXT4500
+ tristate "Framebuffer support for IBM GXT4000P/4500P/6000P/6500P adaptors"
+ depends on FB && PPC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Say Y here to enable support for the IBM GXT4000P/6000P and
+ GXT4500P/6500P display adaptor based on Raster Engine RC1000,
+ found on some IBM System P (pSeries) machines. This driver
+ doesn't use Geometry Engine GT1000.
+
+config FB_PS3
+ tristate "PS3 GPU framebuffer driver"
+ depends on FB && PS3_PS3AV
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
+ ---help---
+ Include support for the virtual frame buffer in the PS3 platform.
+
+config FB_PS3_DEFAULT_SIZE_M
+ int "PS3 default frame buffer size (in MiB)"
+ depends on FB_PS3
+ default 9
+ ---help---
+ This is the default size (in MiB) of the virtual frame buffer in
+ the PS3.
+ The default value can be overridden on the kernel command line
+ using the "ps3fb" option (e.g. "ps3fb=9M");
+
+config FB_XILINX
+ tristate "Xilinx frame buffer support"
+ depends on FB && (XILINX_VIRTEX || MICROBLAZE || ARCH_ZYNQ)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Include support for the Xilinx ML300/ML403 reference design
+ framebuffer. ML300 carries a 640*480 LCD display on the board,
+ ML403 uses a standard DB15 VGA connector.
+
+config FB_GOLDFISH
+ tristate "Goldfish Framebuffer"
+ depends on FB && HAS_DMA
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Framebuffer driver for Goldfish Virtual Platform
+
+config FB_COBALT
+ tristate "Cobalt server LCD frame buffer support"
+ depends on FB && (MIPS_COBALT || MIPS_SEAD3)
+
+config FB_SH7760
+ bool "SH7760/SH7763/SH7720/SH7721 LCDC support"
+ depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763 \
+ || CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Support for the SH7760/SH7763/SH7720/SH7721 integrated
+ (D)STN/TFT LCD Controller.
+ Supports display resolutions up to 1024x1024 pixel, grayscale and
+ color operation, with depths ranging from 1 bpp to 8 bpp monochrome
+ and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
+ panels <= 320 pixel horizontal resolution.
+
+config FB_DA8XX
+ tristate "DA8xx/OMAP-L1xx/AM335x Framebuffer support"
+ depends on FB && (ARCH_DAVINCI_DA8XX || SOC_AM33XX)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_CFB_REV_PIXELS_IN_BYTE
+ select FB_MODE_HELPERS
+ select VIDEOMODE_HELPERS
+ ---help---
+ This is the frame buffer device driver for the TI LCD controller
+ found on DA8xx/OMAP-L1xx/AM335x SoCs.
+ If unsure, say N.
+
+config FB_VIRTUAL
+ tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
+ depends on FB
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ ---help---
+ This is a `virtual' frame buffer device. It operates on a chunk of
+ unswappable kernel memory instead of on the memory of a graphics
+ board. This means you cannot see any output sent to this frame
+ buffer device, while it does consume precious memory. The main use
+ of this frame buffer device is testing and debugging the frame
+ buffer subsystem. Do NOT enable it for normal systems! To protect
+ the innocent, it has to be enabled explicitly at boot time using the
+ kernel option `video=vfb:'.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vfb. In order to load it, you must use
+ the vfb_enable=1 option.
+
+ If unsure, say N.
+
+config XEN_FBDEV_FRONTEND
+ tristate "Xen virtual frame buffer support"
+ depends on FB && XEN
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
+ select INPUT_XEN_KBDDEV_FRONTEND if INPUT_MISC
+ select XEN_XENBUS_FRONTEND
+ default y
+ help
+ This driver implements the front-end of the Xen virtual
+ frame buffer driver. It communicates with a back-end
+ in another domain.
+
+config FB_METRONOME
+ tristate "E-Ink Metronome/8track controller support"
+ depends on FB
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
+ help
+ This driver implements support for the E-Ink Metronome
+ controller. The pre-release name for this device was 8track
+ and could also have been called by some vendors as PVI-nnnn.
+
+config FB_MB862XX
+ tristate "Fujitsu MB862xx GDC support"
+ depends on FB
+ depends on PCI || (OF && PPC)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
+
+choice
+ prompt "GDC variant"
+ depends on FB_MB862XX
+
+config FB_MB862XX_PCI_GDC
+ bool "Carmine/Coral-P(A) GDC"
+ depends on PCI
+ ---help---
+ This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
+ PCI graphics controller devices.
+
+config FB_MB862XX_LIME
+ bool "Lime GDC"
+ depends on OF && PPC
+ select FB_FOREIGN_ENDIAN
+ select FB_LITTLE_ENDIAN
+ ---help---
+ Framebuffer support for Fujitsu Lime GDC on host CPU bus.
+
+endchoice
+
+config FB_MB862XX_I2C
+ bool "Support I2C bus on MB862XX GDC"
+ depends on FB_MB862XX && I2C
+ default y
+ help
+ Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
+ driver to support accessing I2C devices on controller's I2C bus.
+ These are usually some video decoder chips.
+
+config FB_EP93XX
+ tristate "EP93XX frame buffer support"
+ depends on FB && ARCH_EP93XX
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Framebuffer driver for the Cirrus Logic EP93XX series of processors.
+ This driver is also available as a module. The module will be called
+ ep93xx-fb.
+
+config FB_PRE_INIT_FB
+ bool "Don't reinitialize, use bootloader's GDC/Display configuration"
+ depends on FB && FB_MB862XX_LIME
+ ---help---
+ Select this option if display contents should be inherited as set by
+ the bootloader.
+
+config FB_MSM
+ tristate "MSM Framebuffer support"
+ depends on FB && ARCH_MSM
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+
+config FB_MX3
+ tristate "MX3 Framebuffer support"
+ depends on FB && MX3_IPU
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ default y
+ help
+ This is a framebuffer device for the i.MX31 LCD Controller. So
+ far only synchronous displays are supported. If you plan to use
+ an LCD display with your i.MX31 system, say Y here.
+
+config FB_BROADSHEET
+ tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
+ depends on FB
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
+ help
+ This driver implements support for the E-Ink Broadsheet
+ controller. The release name for this device was Epson S1D13521
+ and could also have been called by other names when coupled with
+ a bridge adapter.
+
+config FB_AUO_K190X
+ tristate "AUO-K190X EPD controller support"
+ depends on FB
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
+ help
+ Provides support for epaper controllers from the K190X series
+ of AUO. These controllers can be used to drive epaper displays
+ from Sipix.
+
+ This option enables the common support, shared by the individual
+ controller drivers. You will also have to enable the driver
+ for the controller type used in your device.
+
+config FB_AUO_K1900
+ tristate "AUO-K1900 EPD controller support"
+ depends on FB && FB_AUO_K190X
+ help
+ This driver implements support for the AUO K1900 epd-controller.
+ This controller can drive Sipix epaper displays but can only do
+ serial updates, reducing the number of possible frames per second.
+
+config FB_AUO_K1901
+ tristate "AUO-K1901 EPD controller support"
+ depends on FB && FB_AUO_K190X
+ help
+ This driver implements support for the AUO K1901 epd-controller.
+ This controller can drive Sipix epaper displays and supports
+ concurrent updates, making higher frames per second possible.
+
+config FB_JZ4740
+ tristate "JZ4740 LCD framebuffer support"
+ depends on FB && MACH_JZ4740
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ help
+ Framebuffer support for the JZ4740 SoC.
+
+config FB_MXS
+ tristate "MXS LCD framebuffer support"
+ depends on FB && ARCH_MXS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_MODE_HELPERS
+ select VIDEOMODE_HELPERS
+ help
+ Framebuffer support for the MXS SoC.
+
+config FB_PUV3_UNIGFX
+ tristate "PKUnity v3 Unigfx framebuffer support"
+ depends on FB && UNICORE32 && ARCH_PUV3
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ help
+ Choose this option if you want to use the Unigfx device as a
+ framebuffer device. Without the support of PCI & AGP.
+
+config FB_HYPERV
+ tristate "Microsoft Hyper-V Synthetic Video support"
+ depends on FB && HYPERV
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
+
+config FB_SIMPLE
+ bool "Simple framebuffer support"
+ depends on (FB = y)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ Say Y if you want support for a simple frame-buffer.
+
+ This driver assumes that the display hardware has been initialized
+ before the kernel boots, and the kernel will simply render to the
+ pre-allocated frame buffer surface.
+
+ Configuration re: surface address, size, and format must be provided
+ through device tree, or plain old platform data.
+
+source "drivers/video/fbdev/omap/Kconfig"
+source "drivers/video/fbdev/omap2/Kconfig"
+source "drivers/video/fbdev/exynos/Kconfig"
+source "drivers/video/fbdev/mmp/Kconfig"
+
+config FB_SH_MOBILE_MERAM
+ tristate "SuperH Mobile MERAM read ahead support"
+ depends on (SUPERH || ARCH_SHMOBILE)
+ select GENERIC_ALLOCATOR
+ ---help---
+ Enable MERAM support for the SuperH controller.
+
+ This will allow for caching of the framebuffer to provide more
+ reliable access under heavy main memory bus traffic situations.
+ Up to 4 memory channels can be configured, allowing 4 RGB or
+ 2 YCbCr framebuffers to be configured.
+
+config FB_SSD1307
+ tristate "Solomon SSD1307 framebuffer support"
+ depends on FB && I2C
+ depends on OF
+ depends on GPIOLIB
+ select FB_SYS_FOPS
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_DEFERRED_IO
+ select PWM
+ help
+ This driver implements support for the Solomon SSD1307
+ OLED controller over I2C.
--- /dev/null
+# Makefile for the Linux video drivers.
+# 5 Aug 1999, James Simmons, <mailto:jsimmons@users.sf.net>
+# Rewritten to use lists instead of if-statements.
+
+# Each configuration option enables a list of files.
+
+obj-y += fb_notify.o
+obj-$(CONFIG_FB) += fb.o
+fb-y := fbmem.o fbmon.o fbcmap.o fbsysfs.o \
+ modedb.o fbcvt.o
+fb-objs := $(fb-y)
+
+obj-$(CONFIG_EXYNOS_VIDEO) += exynos/
+
+obj-$(CONFIG_FB_CFB_FILLRECT) += cfbfillrect.o
+obj-$(CONFIG_FB_CFB_COPYAREA) += cfbcopyarea.o
+obj-$(CONFIG_FB_CFB_IMAGEBLIT) += cfbimgblt.o
+obj-$(CONFIG_FB_SYS_FILLRECT) += sysfillrect.o
+obj-$(CONFIG_FB_SYS_COPYAREA) += syscopyarea.o
+obj-$(CONFIG_FB_SYS_IMAGEBLIT) += sysimgblt.o
+obj-$(CONFIG_FB_SYS_FOPS) += fb_sys_fops.o
+obj-$(CONFIG_FB_SVGALIB) += svgalib.o
+obj-$(CONFIG_FB_MACMODES) += macmodes.o
+obj-$(CONFIG_FB_DDC) += fb_ddc.o
+obj-$(CONFIG_FB_DEFERRED_IO) += fb_defio.o
+obj-$(CONFIG_FB_WMT_GE_ROPS) += wmt_ge_rops.o
+
+# Hardware specific drivers go first
+obj-$(CONFIG_FB_AMIGA) += amifb.o c2p_planar.o
+obj-$(CONFIG_FB_ARC) += arcfb.o
+obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o
+obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o
+obj-$(CONFIG_FB_GRVGA) += grvga.o
+obj-$(CONFIG_FB_PM2) += pm2fb.o
+obj-$(CONFIG_FB_PM3) += pm3fb.o
+
+obj-$(CONFIG_FB_I740) += i740fb.o
+obj-$(CONFIG_FB_MATROX) += matrox/
+obj-$(CONFIG_FB_RIVA) += riva/
+obj-$(CONFIG_FB_NVIDIA) += nvidia/
+obj-$(CONFIG_FB_ATY) += aty/ macmodes.o
+obj-$(CONFIG_FB_ATY128) += aty/ macmodes.o
+obj-$(CONFIG_FB_RADEON) += aty/
+obj-$(CONFIG_FB_SIS) += sis/
+obj-$(CONFIG_FB_VIA) += via/
+obj-$(CONFIG_FB_KYRO) += kyro/
+obj-$(CONFIG_FB_SAVAGE) += savage/
+obj-$(CONFIG_FB_GEODE) += geode/
+obj-$(CONFIG_FB_MBX) += mbx/
+obj-$(CONFIG_FB_NEOMAGIC) += neofb.o
+obj-$(CONFIG_FB_3DFX) += tdfxfb.o
+obj-$(CONFIG_FB_CONTROL) += controlfb.o
+obj-$(CONFIG_FB_PLATINUM) += platinumfb.o
+obj-$(CONFIG_FB_VALKYRIE) += valkyriefb.o
+obj-$(CONFIG_FB_CT65550) += chipsfb.o
+obj-$(CONFIG_FB_IMSTT) += imsttfb.o
+obj-$(CONFIG_FB_FM2) += fm2fb.o
+obj-$(CONFIG_FB_VT8623) += vt8623fb.o
+obj-$(CONFIG_FB_TRIDENT) += tridentfb.o
+obj-$(CONFIG_FB_LE80578) += vermilion/
+obj-$(CONFIG_FB_S3) += s3fb.o
+obj-$(CONFIG_FB_ARK) += arkfb.o
+obj-$(CONFIG_FB_STI) += stifb.o
+obj-$(CONFIG_FB_FFB) += ffb.o sbuslib.o
+obj-$(CONFIG_FB_CG6) += cg6.o sbuslib.o
+obj-$(CONFIG_FB_CG3) += cg3.o sbuslib.o
+obj-$(CONFIG_FB_BW2) += bw2.o sbuslib.o
+obj-$(CONFIG_FB_CG14) += cg14.o sbuslib.o
+obj-$(CONFIG_FB_P9100) += p9100.o sbuslib.o
+obj-$(CONFIG_FB_TCX) += tcx.o sbuslib.o
+obj-$(CONFIG_FB_LEO) += leo.o sbuslib.o
+obj-$(CONFIG_FB_ACORN) += acornfb.o
+obj-$(CONFIG_FB_ATARI) += atafb.o c2p_iplan2.o atafb_mfb.o \
+ atafb_iplan2p2.o atafb_iplan2p4.o atafb_iplan2p8.o
+obj-$(CONFIG_FB_MAC) += macfb.o
+obj-$(CONFIG_FB_HECUBA) += hecubafb.o
+obj-$(CONFIG_FB_N411) += n411.o
+obj-$(CONFIG_FB_HGA) += hgafb.o
+obj-$(CONFIG_FB_XVR500) += sunxvr500.o
+obj-$(CONFIG_FB_XVR2500) += sunxvr2500.o
+obj-$(CONFIG_FB_XVR1000) += sunxvr1000.o
+obj-$(CONFIG_FB_IGA) += igafb.o
+obj-$(CONFIG_FB_APOLLO) += dnfb.o
+obj-$(CONFIG_FB_Q40) += q40fb.o
+obj-$(CONFIG_FB_TGA) += tgafb.o
+obj-$(CONFIG_FB_HP300) += hpfb.o
+obj-$(CONFIG_FB_G364) += g364fb.o
+obj-$(CONFIG_FB_EP93XX) += ep93xx-fb.o
+obj-$(CONFIG_FB_SA1100) += sa1100fb.o
+obj-$(CONFIG_FB_HIT) += hitfb.o
+obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o
+obj-$(CONFIG_FB_PVR2) += pvr2fb.o
+obj-$(CONFIG_FB_VOODOO1) += sstfb.o
+obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o
+obj-$(CONFIG_FB_GOLDFISH) += goldfishfb.o
+obj-$(CONFIG_FB_68328) += 68328fb.o
+obj-$(CONFIG_FB_GBE) += gbefb.o
+obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o
+obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o
+obj-$(CONFIG_FB_PXA) += pxafb.o
+obj-$(CONFIG_FB_PXA168) += pxa168fb.o
+obj-$(CONFIG_PXA3XX_GCU) += pxa3xx-gcu.o
+obj-$(CONFIG_MMP_DISP) += mmp/
+obj-$(CONFIG_FB_W100) += w100fb.o
+obj-$(CONFIG_FB_TMIO) += tmiofb.o
+obj-$(CONFIG_FB_AU1100) += au1100fb.o
+obj-$(CONFIG_FB_AU1200) += au1200fb.o
+obj-$(CONFIG_FB_VT8500) += vt8500lcdfb.o
+obj-$(CONFIG_FB_WM8505) += wm8505fb.o
+obj-$(CONFIG_FB_PMAG_AA) += pmag-aa-fb.o
+obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o
+obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o
+obj-$(CONFIG_FB_MAXINE) += maxinefb.o
+obj-$(CONFIG_FB_METRONOME) += metronomefb.o
+obj-$(CONFIG_FB_BROADSHEET) += broadsheetfb.o
+obj-$(CONFIG_FB_AUO_K190X) += auo_k190x.o
+obj-$(CONFIG_FB_AUO_K1900) += auo_k1900fb.o
+obj-$(CONFIG_FB_AUO_K1901) += auo_k1901fb.o
+obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o
+obj-$(CONFIG_FB_SH7760) += sh7760fb.o
+obj-$(CONFIG_FB_IMX) += imxfb.o
+obj-$(CONFIG_FB_S3C) += s3c-fb.o
+obj-$(CONFIG_FB_S3C2410) += s3c2410fb.o
+obj-$(CONFIG_FB_FSL_DIU) += fsl-diu-fb.o
+obj-$(CONFIG_FB_COBALT) += cobalt_lcdfb.o
+obj-$(CONFIG_FB_IBM_GXT4500) += gxt4500.o
+obj-$(CONFIG_FB_PS3) += ps3fb.o
+obj-$(CONFIG_FB_SM501) += sm501fb.o
+obj-$(CONFIG_FB_UDL) += udlfb.o
+obj-$(CONFIG_FB_SMSCUFX) += smscufx.o
+obj-$(CONFIG_FB_XILINX) += xilinxfb.o
+obj-$(CONFIG_SH_MIPI_DSI) += sh_mipi_dsi.o
+obj-$(CONFIG_FB_SH_MOBILE_HDMI) += sh_mobile_hdmi.o
+obj-$(CONFIG_FB_SH_MOBILE_MERAM) += sh_mobile_meram.o
+obj-$(CONFIG_FB_SH_MOBILE_LCDC) += sh_mobile_lcdcfb.o
+obj-$(CONFIG_FB_OMAP) += omap/
+obj-y += omap2/
+obj-$(CONFIG_XEN_FBDEV_FRONTEND) += xen-fbfront.o
+obj-$(CONFIG_FB_CARMINE) += carminefb.o
+obj-$(CONFIG_FB_MB862XX) += mb862xx/
+obj-$(CONFIG_FB_MSM) += msm/
+obj-$(CONFIG_FB_NUC900) += nuc900fb.o
+obj-$(CONFIG_FB_JZ4740) += jz4740_fb.o
+obj-$(CONFIG_FB_PUV3_UNIGFX) += fb-puv3.o
+obj-$(CONFIG_FB_HYPERV) += hyperv_fb.o
+obj-$(CONFIG_FB_OPENCORES) += ocfb.o
+
+# Platform or fallback drivers go here
+obj-$(CONFIG_FB_UVESA) += uvesafb.o
+obj-$(CONFIG_FB_VESA) += vesafb.o
+obj-$(CONFIG_FB_EFI) += efifb.o
+obj-$(CONFIG_FB_VGA16) += vga16fb.o
+obj-$(CONFIG_FB_OF) += offb.o
+obj-$(CONFIG_FB_BF537_LQ035) += bf537-lq035.o
+obj-$(CONFIG_FB_BF54X_LQ043) += bf54x-lq043fb.o
+obj-$(CONFIG_FB_BFIN_LQ035Q1) += bfin-lq035q1-fb.o
+obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin-t350mcqb-fb.o
+obj-$(CONFIG_FB_BFIN_7393) += bfin_adv7393fb.o
+obj-$(CONFIG_FB_MX3) += mx3fb.o
+obj-$(CONFIG_FB_DA8XX) += da8xx-fb.o
+obj-$(CONFIG_FB_MXS) += mxsfb.o
+obj-$(CONFIG_FB_SSD1307) += ssd1307fb.o
+obj-$(CONFIG_FB_SIMPLE) += simplefb.o
+
+# the test framebuffer is last
+obj-$(CONFIG_FB_VIRTUAL) += vfb.o
Marvell Display Subsystem support.
if MMP_DISP
-source "drivers/video/mmp/hw/Kconfig"
-source "drivers/video/mmp/panel/Kconfig"
-source "drivers/video/mmp/fb/Kconfig"
+source "drivers/video/fbdev/mmp/hw/Kconfig"
+source "drivers/video/fbdev/mmp/panel/Kconfig"
+source "drivers/video/fbdev/mmp/fb/Kconfig"
endif
--- /dev/null
+config OMAP2_VRFB
+ bool
+
+if ARCH_OMAP2PLUS
+
+source "drivers/video/fbdev/omap2/dss/Kconfig"
+source "drivers/video/fbdev/omap2/omapfb/Kconfig"
+source "drivers/video/fbdev/omap2/displays-new/Kconfig"
+
+endif
+++ /dev/null
-config OMAP2_VRFB
- bool
-
-if ARCH_OMAP2PLUS
-
-source "drivers/video/omap2/dss/Kconfig"
-source "drivers/video/omap2/omapfb/Kconfig"
-source "drivers/video/omap2/displays-new/Kconfig"
-
-endif
projects / sdk / emulator / emulator-kernel.git / commitdiff