arm64: dts: ls1028a: Add PCIe controller DT nodes

LS1028a implements 2 PCIe 3.0 controllers.

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 41c9633..388aefc 100644 (file)
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -450,6 +450,60 @@
                        status = "disabled";
                };
 
+               pcie@3400000 {
+                       compatible = "fsl,ls1028a-pcie";
+                       reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
+                              0x80 0x00000000 0x0 0x00002000>; /* configuration space */
+                       reg-names = "regs", "config";
+                       interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+                                    <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+                       interrupt-names = "pme", "aer";
+                       #address-cells = <3>;
+                       #size-cells = <2>;
+                       device_type = "pci";
+                       dma-coherent;
+                       num-viewport = <8>;
+                       bus-range = <0x0 0xff>;
+                       ranges = <0x81000000 0x0 0x00000000 0x80 0x00010000 0x0 0x00010000   /* downstream I/O */
+                                 0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+                       msi-parent = <&its>;
+                       #interrupt-cells = <1>;
+                       interrupt-map-mask = <0 0 0 7>;
+                       interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+                                       <0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+                                       <0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+                                       <0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+                       iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+                       status = "disabled";
+               };
+
+               pcie@3500000 {
+                       compatible = "fsl,ls1028a-pcie";
+                       reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
+                              0x88 0x00000000 0x0 0x00002000>; /* configuration space */
+                       reg-names = "regs", "config";
+                       interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "pme", "aer";
+                       #address-cells = <3>;
+                       #size-cells = <2>;
+                       device_type = "pci";
+                       dma-coherent;
+                       num-viewport = <8>;
+                       bus-range = <0x0 0xff>;
+                       ranges = <0x81000000 0x0 0x00000000 0x88 0x00010000 0x0 0x00010000   /* downstream I/O */
+                                 0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+                       msi-parent = <&its>;
+                       #interrupt-cells = <1>;
+                       interrupt-map-mask = <0 0 0 7>;
+                       interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+                                       <0000 0 0 2 &gic 0 0 GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+                                       <0000 0 0 3 &gic 0 0 GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+                                       <0000 0 0 4 &gic 0 0 GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+                       iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+                       status = "disabled";
+               };
+
                smmu: iommu@5000000 {
                        compatible = "arm,mmu-500";
                        reg = <0 0x5000000 0 0x800000>;