net: rtl8139: Remove non-DM_ETH code
authorTom Rini <trini@konsulko.com>
Sun, 27 Nov 2022 15:25:21 +0000 (10:25 -0500)
committerTom Rini <trini@konsulko.com>
Wed, 7 Dec 2022 21:04:17 +0000 (16:04 -0500)
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
drivers/net/rtl8139.c

index feeea93..106bc1c 100644 (file)
 #define DEBUG_TX       0       /* set to 1 to enable debug code */
 #define DEBUG_RX       0       /* set to 1 to enable debug code */
 
-#ifdef CONFIG_DM_ETH
 #define bus_to_phys(devno, a)  dm_pci_mem_to_phys((devno), (a))
 #define phys_to_bus(devno, a)  dm_pci_phys_to_mem((devno), (a))
-#else
-#define bus_to_phys(devno, a)  pci_mem_to_phys((pci_dev_t)(devno), (a))
-#define phys_to_bus(devno, a)  pci_phys_to_mem((pci_dev_t)(devno), (a))
-#endif
 
 /* Symbolic offsets to registers. */
 /* Ethernet hardware address. */
 #define RTL_STS_RXSTATUSOK                     BIT(0)
 
 struct rtl8139_priv {
-#ifndef CONFIG_DM_ETH
-       struct eth_device       dev;
-       pci_dev_t               devno;
-#else
        struct udevice          *devno;
-#endif
        unsigned int            rxstatus;
        unsigned int            cur_rx;
        unsigned int            cur_tx;
@@ -557,107 +547,6 @@ static struct pci_device_id supported[] = {
        { }
 };
 
-#ifndef CONFIG_DM_ETH
-static int rtl8139_bcast_addr(struct eth_device *dev, const u8 *bcast_mac,
-                             int join)
-{
-       return 0;
-}
-
-static int rtl8139_init(struct eth_device *dev, struct bd_info *bis)
-{
-       struct rtl8139_priv *priv = container_of(dev, struct rtl8139_priv, dev);
-
-       return rtl8139_init_common(priv);
-}
-
-static void rtl8139_stop(struct eth_device *dev)
-{
-       struct rtl8139_priv *priv = container_of(dev, struct rtl8139_priv, dev);
-
-       return rtl8139_stop_common(priv);
-}
-
-static int rtl8139_send(struct eth_device *dev, void *packet, int length)
-{
-       struct rtl8139_priv *priv = container_of(dev, struct rtl8139_priv, dev);
-
-       return rtl8139_send_common(priv, packet, length);
-}
-
-static int rtl8139_recv(struct eth_device *dev)
-{
-       struct rtl8139_priv *priv = container_of(dev, struct rtl8139_priv, dev);
-       unsigned char rxdata[RX_BUF_LEN];
-       uchar *packet;
-       int ret;
-
-       ret = rtl8139_recv_common(priv, rxdata, &packet);
-       if (ret) {
-               net_process_received_packet(packet, ret);
-               rtl8139_free_pkt_common(priv, ret);
-       }
-
-       return ret;
-}
-
-int rtl8139_initialize(struct bd_info *bis)
-{
-       struct rtl8139_priv *priv;
-       struct eth_device *dev;
-       int card_number = 0;
-       pci_dev_t devno;
-       int idx = 0;
-       u32 iobase;
-
-       while (1) {
-               /* Find RTL8139 */
-               devno = pci_find_devices(supported, idx++);
-               if (devno < 0)
-                       break;
-
-               pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase);
-               iobase &= ~0xf;
-
-               debug("rtl8139: REALTEK RTL8139 @0x%x\n", iobase);
-
-               priv = calloc(1, sizeof(*priv));
-               if (!priv) {
-                       printf("Can not allocate memory of rtl8139\n");
-                       break;
-               }
-
-               priv->devno = devno;
-               priv->ioaddr = (unsigned long)bus_to_phys(devno, iobase);
-
-               dev = &priv->dev;
-
-               rtl8139_name(dev->name, card_number);
-
-               dev->iobase = priv->ioaddr;     /* Non-DM compatibility */
-               dev->init = rtl8139_init;
-               dev->halt = rtl8139_stop;
-               dev->send = rtl8139_send;
-               dev->recv = rtl8139_recv;
-               dev->mcast = rtl8139_bcast_addr;
-
-               rtl8139_get_hwaddr(priv);
-
-               /* Non-DM compatibility */
-               memcpy(priv->dev.enetaddr, priv->enetaddr, 6);
-
-               eth_register(dev);
-
-               card_number++;
-
-               pci_write_config_byte(devno, PCI_LATENCY_TIMER, 0x20);
-
-               udelay(10 * 1000);
-       }
-
-       return card_number;
-}
-#else /* DM_ETH */
 static int rtl8139_start(struct udevice *dev)
 {
        struct eth_pdata *plat = dev_get_plat(dev);
@@ -776,4 +665,3 @@ U_BOOT_DRIVER(eth_rtl8139) = {
 };
 
 U_BOOT_PCI_DEVICE(eth_rtl8139, supported);
-#endif