This patch fixes checkpatch.pl warnings for block comment styling.
1. Block comment use a trailing */ on a separate line.
2. Block comment use * on subsequent lines.
3. Block comment should align * on each line.
Signed-off-by: Aastha Gupta <aastha.gupta4104@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
#define CHANNEL_MAX_NUMBER 14 /* 14 is the max chnl number */
#define MAX_CHNL_GROUP_24G 6 /* ch1~2, ch3~5, ch6~8,
*ch9~11, ch12~13, CH 14
- * total three groups */
+ * total three groups
+ */
#define CHANNEL_GROUP_MAX_88E 6
enum wireless_mode {
/* 0x80c~0x80f [4 bytes] */
u32 rfHSSIPara1; /* wire parameter control1 : */
/* 0x820~0x823,0x828~0x82b,
- * 0x830~0x833, 0x838~0x83b [16 bytes] */
+ * 0x830~0x833, 0x838~0x83b [16 bytes]
+ */
u32 rfHSSIPara2; /* wire parameter control2 : */
/* 0x824~0x827,0x82c~0x82f, 0x834~0x837,
- * 0x83c~0x83f [16 bytes] */
+ * 0x83c~0x83f [16 bytes]
+ */
u32 rfSwitchControl; /* Tx Rx antenna control : */
/* 0x858~0x85f [16 bytes] */
u32 rfAGCControl1; /* AGC parameter control1 : */
/* 0xc50~0xc53,0xc58~0xc5b, 0xc60~0xc63,
- * 0xc68~0xc6b [16 bytes] */
+ * 0xc68~0xc6b [16 bytes]
+ */
u32 rfAGCControl2; /* AGC parameter control2 : */
/* 0xc54~0xc57,0xc5c~0xc5f, 0xc64~0xc67,
- * 0xc6c~0xc6f [16 bytes] */
+ * 0xc6c~0xc6f [16 bytes]
+ */
u32 rfRxIQImbalance; /* OFDM Rx IQ imbalance matrix : */
/* 0xc14~0xc17,0xc1c~0xc1f, 0xc24~0xc27,
- * 0xc2c~0xc2f [16 bytes] */
+ * 0xc2c~0xc2f [16 bytes]
+ */
u32 rfRxAFE; /* Rx IQ DC ofset and Rx digital filter,
- * Rx DC notch filter : */
+ * Rx DC notch filter :
+ */
/* 0xc10~0xc13,0xc18~0xc1b, 0xc20~0xc23,
- * 0xc28~0xc2b [16 bytes] */
+ * 0xc28~0xc2b [16 bytes]
+ */
u32 rfTxIQImbalance; /* OFDM Tx IQ imbalance matrix */
/* 0xc80~0xc83,0xc88~0xc8b, 0xc90~0xc93,
- * 0xc98~0xc9b [16 bytes] */
+ * 0xc98~0xc9b [16 bytes]
+ */
u32 rfTxAFE; /* Tx IQ DC Offset and Tx DFIR type */
/* 0xc84~0xc87,0xc8c~0xc8f, 0xc94~0xc97,
- * 0xc9c~0xc9f [16 bytes] */
+ * 0xc9c~0xc9f [16 bytes]
+ */
u32 rfLSSIReadBack; /* LSSI RF readback data SI mode */
/* 0x8a0~0x8af [16 bytes] */
u32 rfLSSIReadBackPi; /* LSSI RF readback data PI mode 0x8b8-8bc for
- * Path A and B */
+ * Path A and B
+ */
};
/*------------------------------Define structure----------------------------*/
#define rCCK0_CCA 0xa08
/* AGC default value, saturation level Antenna Diversity, RX AGC, LNA Threshold,
- * RX LNA Threshold useless now. Not the same as 90 series */
+ * RX LNA Threshold useless now. Not the same as 90 series
+ */
#define rCCK0_RxAGC1 0xa0c
#define rCCK0_RxAGC2 0xa10 /* AGC & DAGC */
#ifndef __INC_RA_H
#define __INC_RA_H
-/*++
-Copyright (c) Realtek Semiconductor Corp. All rights reserved.
-
-Module Name:
- RateAdaptive.h
-
-Abstract:
- Prototype of RA and related data structure.
-
-Major Change History:
- When Who What
- ---------- --------------- -------------------------------
- 2011-08-12 Page Create.
---*/
+/*
+ * Copyright (c) Realtek Semiconductor Corp. All rights reserved.
+ *
+ * Module Name:
+ * RateAdaptive.h
+ *
+ * Abstract:
+ * Prototype of RA and related data structure.
+ *
+ * Major Change History:
+ * When Who What
+ * ---------- --------------- -------------------------------
+ * 2011-08-12 Page Create.
+ */
/* Rate adaptive define */
#define PERENTRY 23
-/******************************************************************************
+ /******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
/* port from fw */
/* TODO: Macros Below are Sync from SD7-Driver. It is necessary
- * to check correctness */
+ * to check correctness
+ */
/*
* Call endian free function when
* 1. Read/write packet content.
* 2. Before write integer to IO.
* 3. After read integer from IO.
-*/
+ */
/* Convert little data endian to host ordering */
#define EF1BYTE(_val) \
#define LE_P1BYTE_TO_HOST_1BYTE(__pstart) \
(EF1BYTE(*((u8 *)(__pstart))))
-/*Description:
-Translate subfield (continuous bits in little-endian) of 4-byte
-value to host byte ordering.*/
+/* Description:
+ * Translate subfield (continuous bits in little-endian) of 4-byte
+ * value to host byte ordering.
+ */
#define LE_BITS_TO_4BYTE(__pstart, __bitoffset, __bitlen) \
( \
(LE_P4BYTE_TO_HOST_4BYTE(__pstart) >> (__bitoffset)) & \
static inline struct device *dvobj_to_dev(struct dvobj_priv *dvobj)
{
/* todo: get interface type from dvobj and the return
- * the dev accordingly */
+ * the dev accordingly
+ */
return &dvobj->pusbintf->dev;
};
HW_VAR_FIFO_CLEARN_UP,
HW_VAR_CHECK_TXBUF,
HW_VAR_APFM_ON_MAC, /* Auto FSM to Turn On, include clock, isolation,
- * power control for MAC only */
+ * power control for MAC only
+ */
/* The valid upper nav range for the HW updating, if the true value is
- * larger than the upper range, the HW won't update it. */
+ * larger than the upper range, the HW won't update it.
+ */
/* Unit in microsecond. 0 means disable this function. */
HW_VAR_NAV_UPPER,
HW_VAR_RPT_TIMER_SETTING,
#define IEEE80211_DATA_LEN 2304
/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
- 6.2.1.1.2.
+ * 6.2.1.1.2.
- The figure in section 7.1.2 suggests a body size of up to 2312
- bytes is allowed, which is a bit confusing, I suspect this
- represents the 2304 bytes of real data, plus a possible 8 bytes of
- WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
+ * The figure in section 7.1.2 suggests a body size of up to 2312
+ * bytes is allowed, which is a bit confusing, I suspect this
+ * represents the 2304 bytes of real data, plus a possible 8 bytes of
+ * WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro)
+ */
#define IEEE80211_HLEN 30
/* IEEE 802.11 requires that STA supports concurrent reception of at least
* three fragmented frames. This define can be increased to support more
* concurrent frames, but it should be noted that each entry can consume about
- * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
+ * 2 kB of RAM and increasing cache size will slow down frame reassembly.
+ */
#define IEEE80211_FRAG_CACHE_LEN 4
#define SEC_KEY_1 (1<<0)
/* MAX_RATES_LENGTH needs to be 12. The spec says 8, and many APs
* only use 8, and then use extended rates for the remaining supported
* rates. Other APs, however, stick all of their supported rates on the
- * main rates information element... */
+ * main rates information element...
+ */
#define MAX_RATES_LENGTH ((u8)12)
#define MAX_RATES_EX_LENGTH ((u8)16)
#define MAX_NETWORK_COUNT 128
#define IW_ESSID_MAX_SIZE 32
/*
-join_res:
--1: authentication fail
--2: association fail
-> 0: TID
-*/
+ * join_res:
+ * -1: authentication fail
+ * -2: association fail
+ * > 0: TID
+ */
enum ieee80211_state {
/* the card is not linked at all */
};
#define OUI_MICROSOFT 0x0050f2 /* Microsoft (also used in Wi-Fi specs)
- * 00:50:F2 */
+ * 00:50:F2
+ */
#define WME_OUI_TYPE 2
#define WME_OUI_SUBTYPE_INFORMATION_ELEMENT 0
#define WME_OUI_SUBTYPE_PARAMETER_ELEMENT 1
/* Mainly, it just retains last scan result and scan again. */
/* After that, it compares the scan result to see which one gets better
* RSSI. It selects antenna with better receiving power and returns better
- * scan result. */
+ * scan result.
+ */
#define TP_MODE 0
#define RSSI_MODE 1
/* This indicates two different steps. */
/* In SWAW_STEP_PEAK, driver needs to switch antenna and listen to
- * the signal on the air. */
+ * the signal on the air.
+ */
/* In SWAW_STEP_DETERMINE, driver just compares the signal captured in
* SWAW_STEP_PEAK with original RSSI to determine if it is necessary to
- * switch antenna. */
+ * switch antenna.
+ */
#define SWAW_STEP_PEAK 0
#define SWAW_STEP_DETERMINE 1
s8 RxPower; /* in dBm Translate from PWdB */
s8 RecvSignalPower;/* Real power in dBm for this packet, no
* beautification and aggregation. Keep this raw
- * info to be used for the other procedures. */
+ * info to be used for the other procedures.
+ */
u8 BTRxRSSIPercentage;
u8 SignalStrength; /* in 0-100 index. */
u8 RxPwr[MAX_PATH_NUM_92CS];/* per-path's pwdb */
u8 PTPreRssi; /* if RSSI change 5% do PT */
u8 PTModeSS; /* decide whitch rate should do PT */
u8 RAstage; /* StageRA, decide how many times RA will be done
- * between PT */
+ * between PT
+ */
u8 PTSmoothFactor;
};
u8 TXPowercount;
bool bTXPowerTracking;
u8 TxPowerTrackControl; /* for mp mode, turn off txpwrtracking
- * as default */
+ * as default
+ */
u8 TM_Trigger;
u8 InternalPA5G[2]; /* pathA / pathB */
u8 ThermalMeter[2]; /* ThermalMeter, index 0 for RFIC0,
- * and 1 for RFIC1 */
+ * and 1 for RFIC1
+ */
u8 ThermalValue;
u8 ThermalValue_LCK;
u8 ThermalValue_IQK;
/* ODM PCIE/USB/SDIO/GSPI = 0/1/2/3 */
u8 SupportInterface;
/* ODM composite or independent. Bit oriented/ 92C+92D+ .... or any
- * other type = 1/2/3/... */
+ * other type = 1/2/3/...
+ */
u32 SupportICType;
/* Cut Version TestChip/A-cut/B-cut... = 0/1/2/3/... */
u8 CutVersion;
bool bBtHsOperation; /* BT HS mode is under progress */
u8 btHsDigVal; /* use BT rssi to decide the DIG value */
bool bBtDisableEdcaTurbo;/* Under some condition, don't enable the
- * EDCA Turbo */
+ * EDCA Turbo
+ */
bool bBtBusy; /* BT is busy. */
/* CALL BY VALUE------------- */
/* 2 Define STA info. */
/* _ODM_STA_INFO */
- /* For MP, we need to reduce one array pointer for default port.?? */
+ /* For MP, we need to reduce one array pointer for default port.??*/
struct sta_info *pODM_StaInfo[ODM_ASSOCIATE_ENTRY_NUM];
u16 CurrminRptTime;
struct odm_ra_info RAInfo[ODM_ASSOCIATE_ENTRY_NUM]; /* Use MacID as
- * array index. STA MacID=0,
- * VWiFi Client MacID={1, ODM_ASSOCIATE_ENTRY_NUM-1} */
+ * array index. STA MacID=0,
+ * VWiFi Client MacID={1, ODM_ASSOCIATE_ENTRY_NUM-1}
+ */
/* */
/* 2012/02/14 MH Add to share 88E ra with other SW team. */
/* We need to colelct all support abilit to a proper area. */
/* 20100514 Joseph: Add definition for antenna switching test after link. */
/* This indicates two different the steps. */
/* In SWAW_STEP_PEAK, driver needs to switch antenna and listen to the
- * signal on the air. */
+ * signal on the air.
+ */
/* In SWAW_STEP_DETERMINE, driver just compares the signal captured in
- * SWAW_STEP_PEAK */
+ * SWAW_STEP_PEAK
+ */
/* with original RSSI to determine if it is necessary to switch antenna. */
#define SWAW_STEP_PEAK 0
#define SWAW_STEP_DETERMINE 1
#include "pwrseqcmd.h"
/*
- Check document WM-20110607-Paul-RTL8188E_Power_Architecture-R02.vsd
- There are 6 HW Power States:
- 0: POFF--Power Off
- 1: PDN--Power Down
- 2: CARDEMU--Card Emulation
- 3: ACT--Active Mode
- 4: LPS--Low Power State
- 5: SUS--Suspend
-
- The transition from different states are defined below
- TRANS_CARDEMU_TO_ACT
- TRANS_ACT_TO_CARDEMU
- TRANS_CARDEMU_TO_SUS
- TRANS_SUS_TO_CARDEMU
- TRANS_CARDEMU_TO_PDN
- TRANS_ACT_TO_LPS
- TRANS_LPS_TO_ACT
-
- TRANS_END
-
- PWR SEQ Version: rtl8188E_PwrSeq_V09.h
-*/
+ * Check document WM-20110607-Paul-RTL8188E_Power_Architecture-R02.vsd
+ * There are 6 HW Power States:
+ * 0: POFF--Power Off
+ * 1: PDN--Power Down
+ * 2: CARDEMU--Card Emulation
+ * 3: ACT--Active Mode
+ * 4: LPS--Low Power State
+ * 5: SUS--Suspend
+ *
+ * The transition from different states are defined below
+ * TRANS_CARDEMU_TO_ACT
+ * TRANS_ACT_TO_CARDEMU
+ * TRANS_CARDEMU_TO_SUS
+ * TRANS_SUS_TO_CARDEMU
+ * TRANS_CARDEMU_TO_PDN
+ * TRANS_ACT_TO_LPS
+ * TRANS_LPS_TO_ACT
+ *
+ * TRANS_END
+ *
+ * PWR SEQ Version: rtl8188E_PwrSeq_V09.h
+ */
#define RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS 10
#define RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS 10
#define RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS 10
#define MAX_RX_DMA_BUFFER_SIZE_88E \
0x2400 /* 9k for 88E nornal chip , MaxRxBuff=10k-max(TxReportSize(64*8),
- * WOLPattern(16*24)) */
+ * WOLPattern(16*24))
+ */
#define MAX_TX_REPORT_BUFFER_SIZE 0x0400 /* 1k */
#define TX_SELE_NQ BIT(2) /* Normal Queue */
/* Note: We will divide number of page equally for each queue other
- * than public queue! */
+ * than public queue!
+ */
/* 22k = 22528 bytes = 176 pages (@page = 128 bytes) */
/* must reserved about 7 pages for LPS => 176-7 = 169 (0xA9) */
/* 2*BCN / 1*ps-poll / 1*null-data /1*prob_rsp /1*QOS null-data /1*BT QOS
- * null-data */
+ * null-data
+ */
#define TX_TOTAL_PAGE_NUMBER_88E 0xA9/* 169 (21632=> 21k) */
#define AVAILABLE_EFUSE_ADDR_88E(addr) \
(addr < EFUSE_REAL_CONTENT_LEN_88E)
/* To prevent out of boundary programming case, leave 1byte and program
- * full section */
+ * full section
+ */
/* 9bytes + 1byt + 5bytes and pre 1byte. */
/* For worst case: */
/* | 2byte|----8bytes----|1byte|--7bytes--| 92D */
u8 bDumpRxPkt;/* for debug */
u8 bDumpTxPkt;/* for debug */
u8 FwRsvdPageStartOffset; /* Reserve page start offset except
- * beacon in TxQ. */
+ * beacon in TxQ.
+ */
/* 2010/08/09 MH Add CU power down mode. */
bool pwrdown;
u16 EfuseUsedBytes;
/* Auto FSM to Turn On, include clock, isolation, power control
- * for MAC only */
+ * for MAC only
+ */
u8 bMacPwrCtrlOn;
u32 UsbBulkOutSize;
enum usb_rx_agg_mode UsbRxAggMode;
u8 UsbRxAggBlockCount; /* USB Block count. Block size is
* 512-byte in high speed and 64-byte
- * in full speed */
+ * in full speed
+ */
u8 UsbRxAggBlockTimeout;
u8 UsbRxAggPageCount; /* 8192C DMA page count */
u8 UsbRxAggPageTimeout;
#define REG_HSIMR 0x0058
#define REG_HSISR 0x005c
#define REG_GPIO_PIN_CTRL_2 0x0060 /* RTL8723 WIFI/BT/GPS
- * Multi-Function GPIO Pin Control. */
+ * Multi-Function GPIO Pin Control.
+ */
#define REG_GPIO_IO_SEL_2 0x0062 /* RTL8723 WIFI/BT/GPS
- * Multi-Function GPIO Select. */
+ * Multi-Function GPIO Select.
+ */
#define REG_BB_PAD_CTRL 0x0064
#define REG_MULTI_FUNC_CTRL 0x0068 /* RTL8723 WIFI/BT/GPS
- * Multi-Function control source. */
+ * Multi-Function control source.
+ */
#define REG_GPIO_OUTPUT 0x006c
#define REG_AFE_XTAL_CTRL_EXT 0x0078 /* RTL8188E */
#define REG_XCK_OUT_CTRL 0x007c /* RTL8188E */
#define REG_HIMRE_88E 0x00B8
#define REG_HISRE_88E 0x00BC
#define REG_EFUSE_ACCESS 0x00CF /* Efuse access protection
- * for RTL8723 */
+ * for RTL8723
+ */
#define REG_BIST_SCAN 0x00D0
#define REG_BIST_RPT 0x00D4
#define REG_BIST_ROM_RPT 0x00D8
#define REG_TXPAUSE 0x0522
#define REG_DIS_TXREQ_CLR 0x0523
#define REG_RD_CTRL 0x0524
-/* Format for offset 540h-542h: */
-/* [3:0]: TBTT prohibit setup in unit of 32us. The time for HW getting
- * beacon content before TBTT. */
-/* [7:4]: Reserved. */
-/* [19:8]: TBTT prohibit hold in unit of 32us. The time for HW holding
- * to send the beacon packet. */
-/* [23:20]: Reserved */
-/* Description: */
-/* | */
-/* |<--Setup--|--Hold------------>| */
-/* --------------|---------------------- */
-/* | */
-/* TBTT */
-/* Note: We cannot update beacon content to HW or send any AC packets during
- * the time between Setup and Hold. */
+/* Format for offset 540h-542h:
+ * [3:0]: TBTT prohibit setup in unit of 32us. The time for HW getting
+ * beacon content before TBTT.
+ *
+ * [7:4]: Reserved.
+ * [19:8]: TBTT prohibit hold in unit of 32us. The time for HW holding
+ * to send the beacon packet.
+ *
+ * [23:20]: Reserved
+ * Description:
+ * |
+ * |<--Setup--|--Hold------------>|
+ * --------------|----------------------
+ * |
+ * TBTT
+ * Note: We cannot update beacon content to HW or send any AC packets during
+ * the time between Setup and Hold.
+ */
#define REG_TBTT_PROHIBIT 0x0540
#define REG_RD_NAV_NXT 0x0544
#define REG_NAV_PROT_LEN 0x0546
#define RXERR_RPT_RST BIT(27)
#define _RXERR_RPT_SEL(type) ((type) << 28)
-/* Note: */
-/* The NAV upper value is very important to WiFi 11n 5.2.3 NAV test.
+/* Note:
+ * The NAV upper value is very important to WiFi 11n 5.2.3 NAV test.
* The default value is always too small, but the WiFi TestPlan test
* by 25,000 microseconds of NAV through sending CTS in the air.
* We must update this value greater than 25,000 microseconds to pass
* the item. The offset of NAV_UPPER in 8192C Spec is incorrect, and
- * the offset should be 0x0652. */
+ * the offset should be 0x0652.
+ */
#define REG_NAV_UPPER 0x0652 /* unit of 128 */
/* WMA, BA, CCX */
/* GPIO pins output value */
#define GPIO_OUT (REG_GPIO_PIN_CTRL+1)
/* GPIO pins output enable when a bit is set to "1"; otherwise,
- * input is configured. */
+ * input is configured.
+ */
#define GPIO_IO_SEL (REG_GPIO_PIN_CTRL+2)
#define GPIO_MOD (REG_GPIO_PIN_CTRL+3)
/* 8192C (MSR) Media Status Register (Offset 0x4C, 8 bits) */
/*
-Network Type
-00: No link
-01: Link in ad hoc network
-10: Link in infrastructure network
-11: AP mode
-Default: 00b.
-*/
+ * Network Type
+ * 00: No link
+ * 01: Link in ad hoc network
+ * 10: Link in infrastructure network
+ * 11: AP mode
+ * Default: 00b.
+ */
#define MSR_NOLINK 0x00
#define MSR_ADHOC 0x01
#define MSR_INFRA 0x02
=====================================================================
=====================================================================*/
/*
-Based on Datasheet V33---090401
-Register Summary
-Current IOREG MAP
-0x0000h ~ 0x00FFh System Configuration (256 Bytes)
-0x0100h ~ 0x01FFh MACTOP General Configuration (256 Bytes)
-0x0200h ~ 0x027Fh TXDMA Configuration (128 Bytes)
-0x0280h ~ 0x02FFh RXDMA Configuration (128 Bytes)
-0x0300h ~ 0x03FFh PCIE EMAC Reserved Region (256 Bytes)
-0x0400h ~ 0x04FFh Protocol Configuration (256 Bytes)
-0x0500h ~ 0x05FFh EDCA Configuration (256 Bytes)
-0x0600h ~ 0x07FFh WMAC Configuration (512 Bytes)
-0x2000h ~ 0x3FFFh 8051 FW Download Region (8196 Bytes)
-*/
+ * Based on Datasheet V33---090401
+ * Register Summary
+ * Current IOREG MAP
+ * 0x0000h ~ 0x00FFh System Configuration (256 Bytes)
+ * 0x0100h ~ 0x01FFh MACTOP General Configuration (256 Bytes)
+ * 0x0200h ~ 0x027Fh TXDMA Configuration (128 Bytes)
+ * 0x0280h ~ 0x02FFh RXDMA Configuration (128 Bytes)
+ * 0x0300h ~ 0x03FFh PCIE EMAC Reserved Region (256 Bytes)
+ * 0x0400h ~ 0x04FFh Protocol Configuration (256 Bytes)
+ * 0x0500h ~ 0x05FFh EDCA Configuration (256 Bytes)
+ * 0x0600h ~ 0x07FFh WMAC Configuration (512 Bytes)
+ * 0x2000h ~ 0x3FFFh 8051 FW Download Region (8196 Bytes)
+ */
/* 8192C (TXPAUSE) transmission pause (Offset 0x522, 8 bits) */
-/* Note: */
-/* The bits of stopping AC(VO/VI/BE/BK) queue in datasheet
- * RTL8192S/RTL8192C are wrong, */
-/* the correct arragement is VO - Bit0, VI - Bit1, BE - Bit2,
- * and BK - Bit3. */
-/* 8723 and 88E may be not correct either in the earlier version. */
+/* Note:
+ * The bits of stopping AC(VO/VI/BE/BK) queue in datasheet
+ * RTL8192S/RTL8192C are wrong,
+ * the correct arragement is VO - Bit0, VI - Bit1, BE - Bit2,
+ * and BK - Bit3.
+ * 8723 and 88E may be not correct either in the earlier version.
+ */
#define StopBecon BIT(6)
#define StopHigh BIT(5)
#define StopMgt BIT(4)
#define RCR_AICV BIT(9) /* Accept ICV error packet */
#define RCR_ACRC32 BIT(8) /* Accept CRC32 error packet */
#define RCR_CBSSID_BCN BIT(7) /* Accept BSSID match packet
- * (Rx beacon, probe rsp) */
+ * (Rx beacon, probe rsp)
+ */
#define RCR_CBSSID_DATA BIT(6) /* Accept BSSID match (Data)*/
#define RCR_CBSSID RCR_CBSSID_DATA /* Accept BSSID match */
#define RCR_APWRMGT BIT(5) /* Accept power management pkt*/
/* 2REG_C2HEVT_CLEAR */
/* Set by driver and notify FW that the driver has read
- * the C2H command message */
+ * the C2H command message
+ */
#define C2H_EVT_HOST_CLOSE 0x00
/* Set by FW indicating that FW had set the C2H command
- * message and it's not yet read by driver. */
+ * message and it's not yet read by driver.
+ */
#define C2H_EVT_FW_CLOSE 0xFF
/* 2REG_MULTI_FUNC_CTRL(For RTL8723 Only) */
};
/*
-Caller Mode: Infra, Ad-HoC(C)
-
-Notes: To disconnect the current associated BSS
-
-Command Mode
-
-*/
+ * Caller Mode: Infra, Ad-HoC(C)
+ *
+ * Notes: To disconnect the current associated BSS
+ *
+ * Command Mode
+ *
+ */
struct disconnect_parm {
u32 deauth_timeout_ms;
};
};
/*
-Caller Mode: AP, Ad-HoC, Infra
-
-Notes: To ask RTL8711 performing site-survey
-
-Command-Event Mode
-
-*/
+ * Caller Mode: AP, Ad-HoC, Infra
+ *
+ * Notes: To ask RTL8711 performing site-survey
+ *
+ * Command-Event Mode
+ *
+ */
#define RTW_SSID_SCAN_AMOUNT 9 /* for WEXT_CSCAN_AMOUNT 9 */
#define RTW_CHANNEL_SCAN_AMOUNT (14+37)
};
/*
-Caller Mode: Any
-
-Notes: To set the auth type of RTL8711. open/shared/802.1x
-
-Command Mode
-
-*/
+ * Caller Mode: Any
+ *
+ * Notes: To set the auth type of RTL8711. open/shared/802.1x
+ *
+ * Command Mode
+ *
+ */
struct setauth_parm {
u8 mode; /* 0: legacy open, 1: legacy shared 2: 802.1x */
u8 _1x; /* 0: PSK, 1: TLS */
};
/*
-Caller Mode: Infra
-
-a. algorithm: wep40, wep104, tkip & aes
-b. keytype: grp key/unicast key
-c. key contents
-
-when shared key ==> keyid is the camid
-when 802.1x ==> keyid [0:1] ==> grp key
-when 802.1x ==> keyid > 2 ==> unicast key
-
-*/
+ * Caller Mode: Infra
+ *
+ * a. algorithm: wep40, wep104, tkip & aes
+ * b. keytype: grp key/unicast key
+ * c. key contents
+ *
+ * when shared key ==> keyid is the camid
+ * when 802.1x ==> keyid [0:1] ==> grp key
+ * when 802.1x ==> keyid > 2 ==> unicast key
+ *
+ */
struct setkey_parm {
u8 algorithm; /* could be none, wep40, TKIP, CCMP, wep104 */
u8 keyid;
u8 grpkey; /* 1: this is the grpkey for 802.1x.
- * 0: this is the unicast key for 802.1x */
+ * 0: this is the unicast key for 802.1x
+ */
u8 set_tx; /* 1: main tx key for wep. 0: other key. */
u8 key[16]; /* this could be 40 or 104 */
};
/*
-When in AP or Ad-Hoc mode, this is used to
-allocate an sw/hw entry for a newly associated sta.
-
-Command
-
-when shared key ==> algorithm/keyid
-
-*/
+ * When in AP or Ad-Hoc mode, this is used to
+ * allocate an sw/hw entry for a newly associated sta.
+ *
+ * Command
+ *
+ * when shared key ==> algorithm/keyid
+ *
+ */
struct set_stakey_parm {
u8 addr[ETH_ALEN];
u8 algorithm;
u8 id;/* currently for erasing cam entry if
- * algorithm == _NO_PRIVACY_ */
+ * algorithm == _NO_PRIVACY_
+ */
u8 key[16];
};
};
/*
-Caller Ad-Hoc/AP
-
-Command -Rsp(AID == CAMID) mode
-
-This is to force fw to add an sta_data entry per driver's request.
-
-FW will write an cam entry associated with it.
-
-*/
+ * Caller Ad-Hoc/AP
+ *
+ * Command -Rsp(AID == CAMID) mode
+ *
+ * This is to force fw to add an sta_data entry per driver's request.
+ *
+ * FW will write an cam entry associated with it.
+ *
+ */
struct set_assocsta_parm {
u8 addr[ETH_ALEN];
};
};
/*
- Notes: This command is used for H2C/C2H loopback testing
-
- mac[0] == 0
- ==> CMD mode, return H2C_SUCCESS.
- The following condition must be true under CMD mode
- mac[1] == mac[4], mac[2] == mac[3], mac[0]=mac[5]= 0;
- s0 == 0x1234, s1 == 0xabcd, w0 == 0x78563412, w1 == 0x5aa5def7;
- s2 == (b1 << 8 | b0);
-
- mac[0] == 1
- ==> CMD_RSP mode, return H2C_SUCCESS_RSP
-
- The rsp layout shall be:
- rsp: parm:
- mac[0] = mac[5];
- mac[1] = mac[4];
- mac[2] = mac[3];
- mac[3] = mac[2];
- mac[4] = mac[1];
- mac[5] = mac[0];
- s0 = s1;
- s1 = swap16(s0);
- w0 = swap32(w1);
- b0 = b1
- s2 = s0 + s1
- b1 = b0
- w1 = w0
-
- mac[0] == 2
- ==> CMD_EVENT mode, return H2C_SUCCESS
- The event layout shall be:
- event: parm:
- mac[0] = mac[5];
- mac[1] = mac[4];
- mac[2] = event's seq no, starting from 1 to parm's marc[3]
- mac[3] = mac[2];
- mac[4] = mac[1];
- mac[5] = mac[0];
- s0 = swap16(s0) - event.mac[2];
- s1 = s1 + event.mac[2];
- w0 = swap32(w0);
- b0 = b1
- s2 = s0 + event.mac[2]
- b1 = b0
- w1 = swap32(w1) - event.mac[2];
-
- parm->mac[3] is the total event counts that host requested.
- event will be the same with the cmd's param.
-*/
+ * Notes: This command is used for H2C/C2H loopback testing
+ *
+ * mac[0] == 0
+ * ==> CMD mode, return H2C_SUCCESS.
+ * The following condition must be true under CMD mode
+ * mac[1] == mac[4], mac[2] == mac[3], mac[0]=mac[5]= 0;
+ * s0 == 0x1234, s1 == 0xabcd, w0 == 0x78563412, w1 == 0x5aa5def7;
+ * s2 == (b1 << 8 | b0);
+ *
+ * mac[0] == 1
+ * ==> CMD_RSP mode, return H2C_SUCCESS_RSP
+ *
+ * The rsp layout shall be:
+ * rsp: parm:
+ * mac[0] = mac[5];
+ * mac[1] = mac[4];
+ * mac[2] = mac[3];
+ * mac[3] = mac[2];
+ * mac[4] = mac[1];
+ * mac[5] = mac[0];
+ * s0 = s1;
+ * s1 = swap16(s0);
+ * w0 = swap32(w1);
+ * b0 = b1
+ * s2 = s0 + s1
+ * b1 = b0
+ * w1 = w0
+ *
+ * mac[0] == 2
+ * ==> CMD_EVENT mode, return H2C_SUCCESS
+ * The event layout shall be:
+ * event: parm:
+ * mac[0] = mac[5];
+ * mac[1] = mac[4];
+ * mac[2] = event's seq no, starting from 1 to parm's marc[3]
+ * mac[2] = event's seq no, starting from 1 to parm's marc[3]
+ * mac[2] = event's seq no, starting from 1 to parm's marc[3]
+ * mac[3] = mac[2];
+ * mac[4] = mac[1];
+ * mac[5] = mac[0];
+ * s0 = swap16(s0) - event.mac[2];
+ * s1 = s1 + event.mac[2];
+ * w0 = swap32(w0);
+ * b0 = b1
+ * s2 = s0 + event.mac[2]
+ * b1 = b0
+ * w1 = swap32(w1) - event.mac[2];
+ *
+ * parm->mac[3] is the total event counts that host requested.
+ * event will be the same with the cmd's param.
+ */
/* CMD param Format for driver extra cmd handler */
struct drvextra_cmd_parm {
};
/*
-
-Result:
-0x00: success
-0x01: success, and check Response.
-0x02: cmd ignored due to duplicated sequcne number
-0x03: cmd dropped due to invalid cmd code
-0x04: reserved.
-
-*/
+ *
+ * Result:
+ * 0x00: success
+ * 0x01: success, and check Response.
+ * 0x02: cmd ignored due to duplicated sequcne number
+ * 0x03: cmd dropped due to invalid cmd code
+ * 0x04: reserved.
+ *
+ */
#define H2C_SUCCESS 0x00
#define H2C_SUCCESS_RSP 0x01
/* This variable is initiailzed through EEPROM or registry, */
/* however, its definition may be different with that in EEPROM for */
/* EEPROM size consideration. So, we have to perform proper translation
- * between them. */
+ * between them.
+ */
/* Besides, CustomerID of registry has precedence of that of EEPROM. */
/* defined below. 060703, by rcnjko. */
enum RT_CUSTOMER_ID {
RT_CID_819x_Sitecom = 17,
RT_CID_CCX = 18, /* It's set under CCX logo test and isn't demanded
* for CCX functions, but for test behavior like retry
- * limit and tx report. By Bruce, 2009-02-17. */
+ * limit and tx report. By Bruce, 2009-02-17.
+ */
RT_CID_819x_Lenovo = 19,
RT_CID_819x_QMI = 20,
RT_CID_819x_Edimax_Belkin = 21,
RT_CID_819x_Acer = 25,
RT_CID_819x_AzWave_ASUS = 26,
RT_CID_819x_AzWave = 27, /* For AzWave in PCIe,i
- * The ID is AzWave use and not only Asus */
+ * The ID is AzWave use and not only Asus
+ */
RT_CID_819x_HP = 28,
RT_CID_819x_WNC_COREGA = 29,
RT_CID_819x_Arcadyan_Belkin = 30,
#include <linux/sem.h>
/*
-Used to report a bss has been scanned
-*/
+ * Used to report a bss has been scanned
+ */
struct survey_event {
struct wlan_bssid_ex bss;
};
/*
-Used to report that the requested site survey has been done.
-
-bss_cnt indicates the number of bss that has been reported.
-
-
-*/
+ * Used to report that the requested site survey has been done.
+ *
+ * bss_cnt indicates the number of bss that has been reported.
+ *
+ *
+ */
struct surveydone_event {
unsigned int bss_cnt;
};
/*
-Used to report the link result of joinning the given bss
-
-
-join_res:
--1: authentication fail
--2: association fail
-> 0: TID
-
-*/
+ * Used to report the link result of joinning the given bss
+ *
+ *
+ * join_res:
+ * -1: authentication fail
+ * -2: association fail
+ * > 0: TID
+ *
+ */
struct joinbss_event {
struct wlan_network network;
};
/*
-Used to report a given STA has joinned the created BSS.
-It is used in AP/Ad-HoC(M) mode.
-*/
+ * Used to report a given STA has joinned the created BSS.
+ * It is used in AP/Ad-HoC(M) mode.
+ */
struct stassoc_event {
unsigned char macaddr[6];
enum LED_STATE_871x CurrLedState; /* Current LED state. */
enum LED_STATE_871x BlinkingLedState; /* Next state for blinking,
- * either RTW_LED_ON or RTW_LED_OFF are. */
+ * either RTW_LED_ON or RTW_LED_OFF are.
+ */
u8 bLedOn; /* true if LED is ON, false if LED is OFF. */
u8 bLedLinkBlinkInProgress;
u8 bLedScanBlinkInProgress;
struct work_struct BlinkWorkItem; /* Workitem used by BlinkTimer to
- * manipulate H/W to blink LED. */
+ * manipulate H/W to blink LED.
+ */
};
#define IS_LED_WPS_BLINKING(_LED_871x) \
enum SCAN_RESULT_TYPE {
SCAN_RESULT_P2P_ONLY = 0, /* Will return all the P2P devices. */
SCAN_RESULT_ALL = 1, /* Will return all the scanned device,
- * include AP. */
+ * include AP.
+ */
SCAN_RESULT_WFD_TYPE = 2 /* Will just return the correct WFD
- * device. */
+ * device.
+ */
/* If this device is Miracast sink
* device, it will just return all the
- * Miracast source devices. */
+ * Miracast source devices.
+ */
};
/*
-there are several "locks" in mlme_priv,
-since mlme_priv is a shared resource between many threads,
-like ISR/Call-Back functions, the OID handlers, and even timer functions.
-
-Each _queue has its own locks, already.
-Other items are protected by mlme_priv.lock.
-
-To avoid possible dead lock, any thread trying to modifiying mlme_priv
-SHALL not lock up more than one lock at a time!
-*/
+ * there are several "locks" in mlme_priv,
+ * since mlme_priv is a shared resource between many threads,
+ * like ISR/Call-Back functions, the OID handlers, and even timer functions.
+ *
+ * Each _queue has its own locks, already.
+ * Other items are protected by mlme_priv.lock.
+ *
+ * To avoid possible dead lock, any thread trying to modifiying mlme_priv
+ * SHALL not lock up more than one lock at a time!
+ */
#define traffic_threshold 10
#define traffic_scan_period 500
bool bRxBusyTraffic;
bool bHigherBusyTraffic; /* For interrupt migration purpose. */
bool bHigherBusyRxTraffic; /* We may disable Tx interrupt according
- * to Rx traffic. */
+ * to Rx traffic.
+ */
bool bHigherBusyTxTraffic; /* We may disable Tx interrupt according
- * to Tx traffic. */
+ * to Tx traffic.
+ */
};
struct mlme_priv {
#if defined(CONFIG_88EU_AP_MODE)
/* Number of associated Non-ERP stations (i.e., stations using 802.11b
- * in 802.11g BSS) */
+ * in 802.11g BSS)
+ */
int num_sta_non_erp;
/* Number of associated stations that do not support Short Slot Time */
/* Channel Plan Type. */
/* Note: */
/* We just add new channel plan when the new channel plan is different
- * from any of the following channel plan. */
+ * from any of the following channel plan.
+ */
/* If you just want to customize the actions(scan period or join actions)
- * about one of the channel plan, */
+ * about one of the channel plan,
+ */
/* customize them in struct rt_channel_info in the RT_CHANNEL_LIST. */
enum RT_CHANNEL_DOMAIN {
/* old channel plan mapping ===== */
u32 authModeToggle;
u32 enc_algo;/* encrypt algorithm; */
u32 key_index; /* this is only valid for legacy wep,
- * 0~3 for key id. */
+ * 0~3 for key id.
+ */
u32 iv;
u8 chg_txt[128];
u16 aid;
struct HT_info_element HT_info;
struct wlan_bssid_ex network;/* join network or bss_network,
* if in ap mode, it is the same
- * as cur_network.network */
+ * as cur_network.network
+ */
struct FW_Sta_Info FW_sta_info[NUM_STA];
};
/* The channel information about this channel including joining,
- * scanning, and power constraints. */
+ * scanning, and power constraints.
+ */
struct rt_channel_info {
u8 ChannelNum; /* The channel number. */
enum rt_scan_type ScanType; /* Scan type such as passive
- * or active scan. */
+ * or active scan.
+ */
u32 rx_count;
};
unsigned char cur_wireless_mode; /* NETWORK_TYPE */
unsigned char oper_channel; /* saved chan info when call
- * set_channel_bw */
+ * set_channel_bw
+ */
unsigned char oper_bwmode;
unsigned char oper_ch_offset;/* PRIME_CHNL_OFFSET */
struct mlme_ext_info mlmext_info;/* for sta/adhoc mode, including
* current scan/connecting/connected
* related info. For ap mode,
- * network includes ap's cap_info*/
+ * network includes ap's cap_info
+ */
struct timer_list survey_timer;
struct timer_list link_timer;
u16 chan_scan_time;
_C2HBCN_EVT_,
_ReportPwrState_EVT_, /* filen: only for PCIE, USB */
_CloseRF_EVT_, /* filen: only for PCIE,
- * work around ASPM */
+ * work around ASPM
+ */
MAX_C2HEVT
};
#define bCCKRxPhase 0x4
#if (RTL92SE_FPGA_VERIFY == 1)
#define bLSSIReadAddress 0x3f000000 /* LSSI "Read" Address
- Reg 0x824 rFPGA0_XA_HSSIParameter2 */
+ * Reg 0x824 rFPGA0_XA_HSSIParameter2
+ */
#else
#define bLSSIReadAddress 0x7f800000 /* T65 RF */
#endif
#define bLSSIReadEdge 0x80000000 /* LSSI "Read" edge signal */
#if (RTL92SE_FPGA_VERIFY == 1)
#define bLSSIReadBackData 0xfff /* Reg 0x8a0
- rFPGA0_XA_LSSIReadBack */
+ * rFPGA0_XA_LSSIReadBack
+ */
#else
#define bLSSIReadBackData 0xfffff /* T65 RF */
#endif
#define bDA6Swing 0x380000
#define bADClkPhase 0x4000000 /* Reg 0x880
- rFPGA0_AnalogParameter1 20/40 CCK support switch 40/80 BB MHZ */
+ * rFPGA0_AnalogParameter1 20/40 CCK
+ * support switch 40/80 BB MHZ
+ */
#define b80MClkDelay 0x18000000 /* Useless */
#define bAFEWatchDogEnable 0x20000000
#define bXtalCap01 0xc0000000 /* Reg 0x884
- rFPGA0_AnalogParameter2 Crystal cap */
+ * rFPGA0_AnalogParameter2 Crystal cap
+ */
#define bXtalCap23 0x3
#define bXtalCap92x 0x0f000000
#define bXtalCap 0x0f000000
#define bCCKTxOn 0x1
#define bOFDMTxOn 0x2
#define bDebugPage 0xfff /* reset debug page and HWord,
- * LWord */
+ * LWord
+ */
#define bDebugItem 0xff /* reset debug page and LWord */
#define bAntL 0x10
#define bAntNonHT 0x100
#define RCR_EnCS1 BIT(29) /* enable carrier sense method 1 */
#define RCR_EnCS2 BIT(30) /* enable carrier sense method 2 */
#define RCR_OnlyErlPkt BIT(31) /* Rx Early mode is performed for
- * packet size greater than 1536 */
+ * packet size greater than 1536
+ */
/*--------------------------Define Parameters-------------------------------*/
};
/*
- BIT[2:0] = HW state
- BIT[3] = Protocol PS state, 0: register active state,
- 1: register sleep state
- BIT[4] = sub-state
-*/
+ * BIT[2:0] = HW state
+ * BIT[3] = Protocol PS state, 0: register active state,
+ * 1: register sleep state
+ * BIT[4] = sub-state
+ */
#define PS_DPS BIT(0)
#define PS_LCLK (PS_DPS)
#define RT_RF_OFF_LEVL_FREE_FW BIT(4) /* FW free, re-download the FW*/
#define RT_RF_OFF_LEVL_FW_32K BIT(5) /* FW in 32k */
#define RT_RF_PS_LEVEL_ALWAYS_ASPM BIT(6) /* Always enable ASPM and Clock
- * Req in initialization. */
+ * Req in initialization.
+ */
#define RT_RF_LPS_DISALBE_2R BIT(30) /* When LPS is on, disable 2R
- * if no packet is RX or TX. */
+ * if no packet is RX or TX.
+ */
#define RT_RF_LPS_LEVEL_ASPM BIT(31) /* LPS with ASPM */
#define RT_IN_PS_LEVEL(ppsc, _PS_FLAG) \
struct mutex mutex_lock;
volatile u8 rpwm; /* requested power state for fw */
volatile u8 cpwm; /* fw current power state. updated when
- * 1. read from HCPWM 2. driver lowers power level */
+ * 1. read from HCPWM 2. driver lowers power level
+ */
volatile u8 tog; /* toggling */
volatile u8 cpwm_tog; /* toggling */
u8 ips_mode;
u8 ips_mode_req; /* used to accept the mode setting request,
- * will update to ipsmode later */
+ * will update to ipsmode later
+ */
uint bips_processing;
unsigned long ips_deny_time; /* will deny IPS when system time less than this */
u8 ps_processing; /* temp used to mark whether in rtw_ps_processor */
struct qos_priv {
unsigned int qos_option; /* bit mask option: u-apsd,
- * s-apsd, ts, block ack... */
+ * s-apsd, ts, block ack...
+ */
};
#endif /* _RTL871X_QOS_H_ */
struct stainfo_rxcache {
u16 tid_rxseq[16];
/*
- unsigned short tid0_rxseq;
- unsigned short tid1_rxseq;
- unsigned short tid2_rxseq;
- unsigned short tid3_rxseq;
- unsigned short tid4_rxseq;
- unsigned short tid5_rxseq;
- unsigned short tid6_rxseq;
- unsigned short tid7_rxseq;
- unsigned short tid8_rxseq;
- unsigned short tid9_rxseq;
- unsigned short tid10_rxseq;
- unsigned short tid11_rxseq;
- unsigned short tid12_rxseq;
- unsigned short tid13_rxseq;
- unsigned short tid14_rxseq;
- unsigned short tid15_rxseq;
-*/
+ * unsigned short tid0_rxseq;
+ * unsigned short tid1_rxseq;
+ * unsigned short tid2_rxseq;
+ * unsigned short tid3_rxseq;
+ * unsigned short tid4_rxseq;
+ * unsigned short tid5_rxseq;
+ * unsigned short tid6_rxseq;
+ * unsigned short tid7_rxseq;
+ * unsigned short tid8_rxseq;
+ * unsigned short tid9_rxseq;
+ * unsigned short tid10_rxseq;
+ * unsigned short tid11_rxseq;
+ * unsigned short tid12_rxseq;
+ * unsigned short tid13_rxseq;
+ * unsigned short tid14_rxseq;
+ * unsigned short tid15_rxseq;
+ */
};
struct signal_stat {
u8 RxMIMOSignalStrength[MAX_PATH_NUM_92CS];/* in 0~100 index */
s8 RxPower; /* in dBm Translate from PWdB */
/* Real power in dBm for this packet, no beautification and aggregation.
- * Keep this raw info to be used for the other procedures. */
+ * Keep this raw info to be used for the other procedures.
+ */
s8 recvpower;
u8 BTRxRSSIPercentage;
u8 SignalStrength; /* in 0-100 index. */
u8 privacy; /* in frame_ctrl field */
u8 bdecrypted;
u8 encrypt; /* when 0 indicate no encrypt. when non-zero,
- * indicate the encrypt algorithm */
+ * indicate the encrypt algorithm
+ */
u8 iv_len;
u8 icv_len;
u8 crc_err;
};
/*
-accesser of recv_priv: rtw_recv_entry(dispatch / passive level);
-recv_thread(passive) ; returnpkt(dispatch)
-; halt(passive) ;
-
-using enter_critical section to protect
-*/
+ * accesser of recv_priv: rtw_recv_entry(dispatch / passive level);
+ * recv_thread(passive) ; returnpkt(dispatch)
+ * ; halt(passive) ;
+ *
+ * using enter_critical section to protect
+ */
struct recv_priv {
struct __queue free_recv_queue;
struct __queue recv_pending_queue;
};
/*
- head ----->
-
- data ----->
-
- payload
-
- tail ----->
-
-
- end ----->
-
- len = (unsigned int )(tail - data);
-
-*/
+ * head ----->
+ *
+ * data ----->
+ *
+ * payload
+ *
+ * tail ----->
+ *
+ *
+ * end ----->
+ *
+ * len = (unsigned int )(tail - data);
+ *
+ */
struct recv_frame {
struct list_head list;
struct sk_buff *pkt;
#define RTL8711_RF_DEF_SENS 4
/* We now define the following channels as the max channels in each
- * channel plan. */
+ * channel plan.
+ */
/* 2G, total 14 chnls */
/* {1,2,3,4,5,6,7,8,9,10,11,12,13,14} */
#define MAX_CHANNEL_NUM_2G 14
cChannelAgility = 0x0080,
cSpectrumMgnt = 0x0100,
cQos = 0x0200, /* For HCCA, use with CF-Pollable
- * and CF-PollReq */
+ * and CF-PollReq
+ */
cShortSlotTime = 0x0400,
cAPSD = 0x0800,
cRM = 0x1000, /* RRM (Radio Request Measurement) */
struct security_priv {
u32 dot11AuthAlgrthm; /* 802.11 auth, could be open,
- * shared, 8021x and authswitch */
+ * shared, 8021x and authswitch
+ */
u32 dot11PrivacyAlgrthm; /* This specify the privacy for
- * shared auth. algorithm. */
+ * shared auth. algorithm.
+ */
/* WEP */
u32 dot11PrivacyKeyIndex; /* this is only valid for legendary
- * wep, 0~3 for key id.(tx key index) */
+ * wep, 0~3 for key id.(tx key index)
+ */
union Keytype dot11DefKey[4]; /* this is only valid for def. key */
u32 dot11DefKeylen[4];
u32 dot118021XGrpPrivacy; /* This specify the privacy algthm.
- * used for Grp key */
+ * used for Grp key
+ */
u32 dot118021XGrpKeyid; /* key id used for Grp Key
- * ( tx key index) */
+ * ( tx key index)
+ */
union Keytype dot118021XGrpKey[4]; /* 802.1x Group Key,
- * for inx0 and inx1 */
+ * for inx0 and inx1
+ */
union Keytype dot118021XGrptxmickey[4];
union Keytype dot118021XGrprxmickey[4];
union pn48 dot11Grptxpn; /* PN48 used for Grp Key xmit.*/
u8 bcheck_grpkey;
u8 bgrpkey_handshake;
s32 hw_decrypted;/* if the rx packets is hw_decrypted==false,i
- * it means the hw has not been ready. */
+ * it means the hw has not been ready.
+ */
/* keeps the auth_type & enc_status from upper layer
- * ioctl(wpa_supplicant or wzc) */
+ * ioctl(wpa_supplicant or wzc)
+ */
u32 ndisauthtype; /* NDIS_802_11_AUTHENTICATION_MODE */
u32 ndisencryptstatus; /* NDIS_802_11_ENCRYPTION_STATUS */
struct wlan_bssid_ex sec_bss; /* for joinbss (h2c buffer) usage */
/* ===== start - public domain SHA256 implementation ===== */
/* This is based on SHA256 implementation in LibTomCrypt that was released into
- * public domain by Tom St Denis. */
+ * public domain by Tom St Denis.
+ */
/* the K array */
static const unsigned long K[64] = {
u16 seqnum;
u16 hdrlen; /* the WLAN Header Len */
u32 pktlen; /* the original 802.3 pkt raw_data len (not include
- * ether_hdr data) */
+ * ether_hdr data)
+ */
u32 last_txcmdsz;
u8 nr_frags;
u8 encrypt; /* when 0 indicate no encrypt. when non-zero,
- * indicate the encrypt algorith */
+ * indicate the encrypt algorith
+ */
u8 iv_len;
u8 icv_len;
u8 iv[18];
spinlock_t lock;
int option;
int apsd_setting; /* When bit mask is on, the associated edca
- * queue supports APSD. */
+ * queue supports APSD.
+ */
struct tx_servq be_q; /* priority == 0,3 */
struct tx_servq bk_q; /* priority == 1,2 */
struct tx_servq vi_q; /* priority == 4,5 */
u8 hwxmit_entry;
u8 wmm_para_seq[4];/* sequence for wmm ac parameter strength
* from large to small. it's value is 0->vo,
- * 1->vi, 2->be, 3->bk. */
+ * 1->vi, 2->be, 3->bk.
+ */
u8 txirp_cnt;/* */
struct tasklet_struct xmit_tasklet;
/* per AC pending irp */
/* Notes: */
/* STA_Mode: */
/* curr_network(mlme_priv/security_priv/qos/ht) +
- * sta_info: (STA & AP) CAP/INFO */
+ * sta_info: (STA & AP) CAP/INFO
+ */
/* scan_q: AP CAP/INFO */
/* AP_Mode: */
/* ================ODM Relative Info======================= */
/* Please be careful, don't declare too much structure here.
- * It will cost memory * STA support num. */
+ * It will cost memory * STA support num.
+ */
/* 2011/10/20 MH Add for ODM STA info. */
/* Driver Write */
u8 bValid; /* record the sta status link or not? */
struct sta_info *sta_aid[NUM_STA];
u16 sta_dz_bitmap;/* only support 15 stations, station aid bitmap
- * for sleeping sta. */
+ * for sleeping sta.
+ */
u16 tim_bitmap; /* only support 15 stations, aid=0~15 mapping
- * bit0~bit15 */
+ * bit0~bit15
+ */
u16 max_num_sta;
/* This value is tested by WiFi 11n Test Plan 5.2.3. */
/* This test verifies the WLAN NIC can update the NAV through sending
- * the CTS with large duration. */
+ * the CTS with large duration.
+ */
#define WiFiNavUpperUs 30000 /* 30 ms */
enum WIFI_FRAME_TYPE {
#define _IEEE8021X_PSK_ 2 /* WPA with pre-shared key */
/*
-#define _NO_PRIVACY_ 0
-#define _WEP_40_PRIVACY_ 1
-#define _TKIP_PRIVACY_ 2
-#define _WRAP_PRIVACY_ 3
-#define _CCMP_PRIVACY_ 4
-#define _WEP_104_PRIVACY_ 5
-#define _WEP_WPA_MIXED_PRIVACY_ 6 WEP + WPA
-*/
+ * #define _NO_PRIVACY_ 0
+ * #define _WEP_40_PRIVACY_ 1
+ * #define _TKIP_PRIVACY_ 2
+ * #define _WRAP_PRIVACY_ 3
+ * #define _CCMP_PRIVACY_ 4
+ * #define _WEP_104_PRIVACY_ 5
+ * #define _WEP_WPA_MIXED_PRIVACY_ 6 WEP + WPA
+ */
/*-----------------------------------------------------------------------------
Below is the definition for WMM
#define P2P_PROVISIONING_SCAN_CNT 3
/* default value, used when: (1)p2p disabled or (2)p2p enabled
- * but only do 1 scan phase */
+ * but only do 1 scan phase
+ */
#define P2P_FINDPHASE_EX_NONE 0
/* used when p2p enabled and want to do 1 scan phase and
- * P2P_FINDPHASE_EX_MAX-1 find phase */
+ * P2P_FINDPHASE_EX_MAX-1 find phase
+ */
#define P2P_FINDPHASE_EX_FULL 1
#define P2P_FINDPHASE_EX_SOCIAL_FIRST (P2P_FINDPHASE_EX_FULL+1)
#define P2P_FINDPHASE_EX_MAX 4
* + NDIS_802_11_LENGTH_RATES_EX + IELength
*
* Except the IELength, all other fields are fixed length.
- * Therefore, we can define a macro to represent the partial sum. */
+ * Therefore, we can define a macro to represent the partial sum.
+ */
enum ndis_802_11_auth_mode {
Ndis802_11AuthModeOpen,
struct ndis_802_11_wep {
u32 Length; /* Length of this structure */
u32 KeyIndex; /* 0 is the per-client key,
- * 1-N are the global keys */
+ * 1-N are the global keys
+ */
u32 KeyLength; /* length of key in bytes */
u8 KeyMaterial[16];/* variable len depending on above field */
};
Ndis802_11StatusType_MediaStreamMode,
Ndis802_11StatusType_PMKID_CandidateList,
Ndis802_11StatusTypeMax /* not a real type, defined as
- * an upper bound */
+ * an upper bound
+ */
};
/* mask for authentication/integrity fields */
struct wlan_bcn_info {
/* these infor get from rtw_get_encrypt_info when
- * * translate scan to UI */
+ * * translate scan to UI
+ */
u8 encryp_protocol;/* ENCRYP_PROTOCOL_E: OPEN/WEP/WPA/WPA2/WAPI */
int group_cipher; /* WPA/WPA2 group cipher */
int pairwise_cipher;/* WPA/WPA2/WEP pairwise cipher */
};
/* temporally add #pragma pack for structure alignment issue of
-* struct wlan_bssid_ex and get_struct wlan_bssid_ex_sz()
-*/
+ * struct wlan_bssid_ex and get_struct wlan_bssid_ex_sz()
+ */
struct wlan_bssid_ex {
u32 Length;
unsigned char MacAddress[ETH_ALEN];
struct wlan_phy_info PhyInfo;
u32 IELength;
u8 IEs[MAX_IE_SZ]; /* timestamp, beacon interval, and
- * capability information) */
+ * capability information)
+ */
} __packed;
static inline uint get_wlan_bssid_ex_sz(struct wlan_bssid_ex *bss)
struct list_head list;
int network_type; /* refer to ieee80211.h for WIRELESS_11A/B/G */
int fixed; /* set fixed when not to be removed
- * in site-surveying */
+ * in site-surveying
+ */
unsigned long last_scanned; /* timestamp for the network */
int aid; /* will only be valid when a BSS is joinned. */
int join_res;
projects / platform / kernel / linux-rpi.git / commitdiff