ARM: dts: at91: sam9x60: fix the SOC detection

Remove the dbgu compatible strings in the UART submodule of the
flexcom for the proper SOC detection.

Fixes: 99c808335877 (ARM: dts: at91: sam9x60: Add missing flexcom definitions)
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
Link: https://lore.kernel.org/r/20230712100042.317856-1-durai.manickamkr@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi
index 8b53997675e75032fd37583508a984cc060f4098..73d570a172690cf6ec284c85f8f88c2edb9d63dc 100644 (file)
--- a/arch/arm/boot/dts/microchip/sam9x60.dtsi
+++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi
@@ -172,7 +172,7 @@
                                status = "disabled";
 
                                uart4: serial@200 {
-                                       compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+                                       compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
                                        reg = <0x200 0x200>;
                                        interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
                                        dmas = <&dma0
@@ -240,7 +240,7 @@
                                status = "disabled";
 
                                uart5: serial@200 {
-                                       compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+                                       compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
                                        reg = <0x200 0x200>;
                                        atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                        interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -370,7 +370,7 @@
                                status = "disabled";
 
                                uart11: serial@200 {
-                                       compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+                                       compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
                                        reg = <0x200 0x200>;
                                        interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
                                        dmas = <&dma0
@@ -419,7 +419,7 @@
                                status = "disabled";
 
                                uart12: serial@200 {
-                                       compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+                                       compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
                                        reg = <0x200 0x200>;
                                        interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
                                        dmas = <&dma0
@@ -576,7 +576,7 @@
                                status = "disabled";
 
                                uart6: serial@200 {
-                                       compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+                                       compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
                                        reg = <0x200 0x200>;
                                        interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
                                        dmas = <&dma0
@@ -625,7 +625,7 @@
                                status = "disabled";
 
                                uart7: serial@200 {
-                                       compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+                                       compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
                                        reg = <0x200 0x200>;
                                        interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
                                        dmas = <&dma0
@@ -674,7 +674,7 @@
                                status = "disabled";
 
                                uart8: serial@200 {
-                                       compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+                                       compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
                                        reg = <0x200 0x200>;
                                        interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
                                        dmas = <&dma0
@@ -723,7 +723,7 @@
                                status = "disabled";
 
                                uart0: serial@200 {
-                                       compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+                                       compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
                                        reg = <0x200 0x200>;
                                        interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
                                        dmas = <&dma0
@@ -791,7 +791,7 @@
                                status = "disabled";
 
                                uart1: serial@200 {
-                                       compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+                                       compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
                                        reg = <0x200 0x200>;
                                        interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
                                        dmas = <&dma0
@@ -859,7 +859,7 @@
                                status = "disabled";
 
                                uart2: serial@200 {
-                                       compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+                                       compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
                                        reg = <0x200 0x200>;
                                        interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
                                        dmas = <&dma0
@@ -927,7 +927,7 @@
                                status = "disabled";
 
                                uart3: serial@200 {
-                                       compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+                                       compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
                                        reg = <0x200 0x200>;
                                        interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
                                        dmas = <&dma0
@@ -1050,7 +1050,7 @@
                                status = "disabled";
 
                                uart9: serial@200 {
-                                       compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+                                       compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
                                        reg = <0x200 0x200>;
                                        interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
                                        dmas = <&dma0
@@ -1099,7 +1099,7 @@
                                status = "disabled";
 
                                uart10: serial@200 {
-                                       compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+                                       compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
                                        reg = <0x200 0x200>;
                                        interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
                                        dmas = <&dma0