artik710_raptor: configs: promote ota configuration

This patch sets the ota configuration as default of artik710 raptor
board. The original configurations have been moved to
artik710_raptor_legacy_defconfig.

Change-Id: I3e325ca5e19b329632e29d42a355d415d312bf18
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>

diff --git a/configs/artik710_raptor_defconfig b/configs/artik710_raptor_defconfig
index 724d7de17946ab72788a6ca51f754d793d4e093d..5b30912329812af665fcae621a89b92ee6358cdd 100644 (file)
--- a/configs/artik710_raptor_defconfig
+++ b/configs/artik710_raptor_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARM=y
 CONFIG_SYS_CONFIG_NAME="artik710_raptor"
 CONFIG_ARCH_NEXELL=y
 CONFIG_ARCH_S5P6818=y
+CONFIG_ARTIK_OTA=y
 CONFIG_TARGET_ARTIK710_RAPTOR=y
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_DM_I2C=y

diff --git a/configs/artik710_raptor_legacy_defconfig b/configs/artik710_raptor_legacy_defconfig
new file mode 100644 (file)
index 0000000..724d7de
--- /dev/null
+++ b/configs/artik710_raptor_legacy_defconfig
@@ -0,0 +1,45 @@
+CONFIG_ARM=y
+CONFIG_SYS_CONFIG_NAME="artik710_raptor"
+CONFIG_ARCH_NEXELL=y
+CONFIG_ARCH_S5P6818=y
+CONFIG_TARGET_ARTIK710_RAPTOR=y
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="s5p6818-artik710-raptor"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_FIT=y
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_USB=y
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_NFS is not set
+CONFIG_CMD_PING=y
+CONFIG_CMD_FDISK=y
+CONFIG_CMD_EXT4_IMG_WRITE=y
+CONFIG_CMD_SD_RECOVERY=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_EMBED=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_NX_GPIO=y
+CONFIG_DM_I2C_GPIO=y
+CONFIG_SYS_I2C_NEXELL=y
+CONFIG_SENSORID=y
+CONFIG_SENSORID_ARTIK=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_NXE2000=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_NXE2000=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_ERRNO_STR=y

diff --git a/configs/artik710_raptor_ota_defconfig b/configs/artik710_raptor_ota_defconfig
deleted file mode 100644 (file)
index 91afc1b..0000000
--- a/configs/artik710_raptor_ota_defconfig
+++ /dev/null
@@ -1,46 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SYS_CONFIG_NAME="artik710_raptor"
-CONFIG_ARCH_NEXELL=y
-CONFIG_ARCH_S5P6818=y
-CONFIG_TARGET_ARTIK710_RAPTOR=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_DM_I2C=y
-CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="s5p6818-artik710-raptor"
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_FIT=y
-# CONFIG_CMD_IMI is not set
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_USB=y
-# CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
-# CONFIG_CMD_NFS is not set
-CONFIG_CMD_PING=y
-CONFIG_CMD_FDISK=y
-CONFIG_CMD_EXT4_IMG_WRITE=y
-CONFIG_CMD_SD_RECOVERY=y
-CONFIG_CMD_PMIC=y
-CONFIG_CMD_REGULATOR=y
-CONFIG_OF_CONTROL=y
-CONFIG_OF_EMBED=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_DM=y
-CONFIG_NX_GPIO=y
-CONFIG_DM_I2C_GPIO=y
-CONFIG_SYS_I2C_NEXELL=y
-CONFIG_SENSORID=y
-CONFIG_SENSORID_ARTIK=y
-CONFIG_DM_ETH=y
-CONFIG_ETH_DESIGNWARE=y
-CONFIG_PINCTRL=y
-CONFIG_DM_PMIC=y
-CONFIG_DM_PMIC_NXE2000=y
-CONFIG_DM_REGULATOR=y
-CONFIG_DM_REGULATOR_NXE2000=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_ERRNO_STR=y
-CONFIG_ARTIK_OTA=y