clk: sunxi-ng: f1c100s: Add IR mod clock

For some reason the mod clock for the Allwinner F1C100s CIR (infrared
receiver) peripheral was not modeled in the CCU driver.

Add the clock description to the list, and wire it up in the clock list.
By assigning a new clock ID at the end, it extends the number of clocks.

This allows to use the CIR peripheral on any F1C100s series board.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221107005433.11079-5-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>

diff --git a/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c b/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c
index ed097c4..0d5b60b 100644 (file)
--- a/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c
+++ b/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c
@@ -239,7 +239,14 @@ static SUNXI_CCU_MUX_WITH_GATE(i2s_clk, "i2s", i2s_spdif_parents,
 static SUNXI_CCU_MUX_WITH_GATE(spdif_clk, "spdif", i2s_spdif_parents,
                               0x0b4, 16, 2, BIT(31), 0);
 
-/* The BSP header file has a CIR_CFG, but no mod clock uses this definition */
+static const char * const ir_parents[] = { "osc32k", "osc24M" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir_clk, "ir",
+                                 ir_parents, 0x0b8,
+                                 0, 4,         /* M */
+                                 16, 2,        /* P */
+                                 24, 2,        /* mux */
+                                 BIT(31),      /* gate */
+                                 0);
 
 static SUNXI_CCU_GATE(usb_phy0_clk,    "usb-phy0",     "osc24M",
                      0x0cc, BIT(1), 0);
@@ -355,6 +362,7 @@ static struct ccu_common *suniv_ccu_clks[] = {
        &mmc1_output_clk.common,
        &i2s_clk.common,
        &spdif_clk.common,
+       &ir_clk.common,
        &usb_phy0_clk.common,
        &dram_ve_clk.common,
        &dram_csi_clk.common,
@@ -446,6 +454,7 @@ static struct clk_hw_onecell_data suniv_hw_clks = {
                [CLK_MMC1_OUTPUT]       = &mmc1_output_clk.common.hw,
                [CLK_I2S]               = &i2s_clk.common.hw,
                [CLK_SPDIF]             = &spdif_clk.common.hw,
+               [CLK_IR]                = &ir_clk.common.hw,
                [CLK_USB_PHY0]          = &usb_phy0_clk.common.hw,
                [CLK_DRAM_VE]           = &dram_ve_clk.common.hw,
                [CLK_DRAM_CSI]          = &dram_csi_clk.common.hw,

diff --git a/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.h b/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.h
index b22484f..d56a431 100644 (file)
--- a/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.h
+++ b/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.h
@@ -29,6 +29,6 @@
 
 /* All bus gates, DRAM gates and mod clocks are exported */
 
-#define CLK_NUMBER             (CLK_AVS + 1)
+#define CLK_NUMBER             (CLK_IR + 1)
 
 #endif /* _CCU_SUNIV_F1C100S_H_ */

diff --git a/include/dt-bindings/clock/suniv-ccu-f1c100s.h b/include/dt-bindings/clock/suniv-ccu-f1c100s.h
index f5ac155..d757076 100644 (file)
--- a/include/dt-bindings/clock/suniv-ccu-f1c100s.h
+++ b/include/dt-bindings/clock/suniv-ccu-f1c100s.h
@@ -67,4 +67,6 @@
 #define CLK_CODEC              65
 #define CLK_AVS                        66
 
+#define CLK_IR                 67
+
 #endif