arm64: freescale/imx8mp-evk.dts: reorder nodes alphabetically

The nodes after the root nodes are supposed to be ordered
alphabetically. There is however an expection for &pinctrl that some
consider to be good placed at the end of the file. So only move flexcan1
and flexcan2 to their proper place.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 6975de7..a449a51 100644 (file)
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -83,20 +83,6 @@
        cpu-supply = <&reg_arm>;
 };
 
-&flexcan1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_flexcan1>;
-       xceiver-supply = <&reg_can1_stby>;
-       status = "okay";
-};
-
-&flexcan2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_flexcan2>;
-       xceiver-supply = <&reg_can2_stby>;
-       status = "disabled";/* can2 pin conflict with pdm */
-};
-
 &eqos {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_eqos>;
@@ -213,6 +199,20 @@
        };
 };
 
+&flexcan1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_flexcan1>;
+       xceiver-supply = <&reg_can1_stby>;
+       status = "okay";
+};
+
+&flexcan2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_flexcan2>;
+       xceiver-supply = <&reg_can2_stby>;
+       status = "disabled";/* can2 pin conflict with pdm */
+};
+
 &i2c1 {
        clock-frequency = <400000>;
        pinctrl-names = "default";