#define NOP_OPCODE 0x00
#endif
+#ifndef TC_ADJUST_RELOC_COUNT
+#define TC_ADJUST_RELOC_COUNT(FIXP,COUNT)
+#endif
+
#ifndef TC_FORCE_RELOCATION
#define TC_FORCE_RELOCATION(FIXP) 0
#endif
reloc->addend += reloc->address;
}
/* Pass bogus address so that when bfd_perform_relocation adds
- `address' back in, it'll come up with `data', which is where
- we want it to operate. */
+ `reloc->address' back in, it'll come up with `data', which is where
+ we want it to operate. We can't just do it by fudging reloc->address,
+ since that might be used in the calculations(?). */
s = bfd_perform_relocation (stdoutput, reloc, data - reloc->address,
sec, stdoutput);
switch (s)
register fixS *fixP;
segT this_segment_type; /* N_TYPE bits for segment. */
{
- register long seg_reloc_count;
- register symbolS *add_symbolP;
- register symbolS *sub_symbolP;
+ long seg_reloc_count = 0;
+ symbolS *add_symbolP;
+ symbolS *sub_symbolP;
valueT add_number;
- register int size;
- register char *place;
- register long where;
- register char pcrel;
- register fragS *fragP;
- register segT add_symbol_segment = absolute_section;
-
- seg_reloc_count = 0;
- /* If the linker is doing the relaxing, we must not do any fixups. */
- /* Well, strictly speaking that's not true -- we could do any that
- are PC-relative and don't cross regions that could change size.
- And for the i960 (the only machine for which we've got a relaxing
- linker right now), we might be able to turn callx/callj into bal
- in cases where we know the maximum displacement. */
+ int size;
+ char *place;
+ long where;
+ char pcrel;
+ fragS *fragP;
+ segT add_symbol_segment = absolute_section;
+
+ /* If the linker is doing the relaxing, we must not do any fixups.
+
+ Well, strictly speaking that's not true -- we could do any that are
+ PC-relative and don't cross regions that could change size. And for the
+ i960 (the only machine for which we've got a relaxing linker right now),
+ we might be able to turn callx/callj into bal anyways in cases where we
+ know the maximum displacement. */
if (linkrelax)
- for (; fixP; fixP = fixP->fx_next)
- seg_reloc_count++;
- else
- for (; fixP; fixP = fixP->fx_next)
- {
- fragP = fixP->fx_frag;
- know (fragP);
- where = fixP->fx_where;
- place = fragP->fr_literal + where;
- size = fixP->fx_size;
- add_symbolP = fixP->fx_addsy;
-#ifdef TC_I960
- if (fixP->fx_tcbit && TC_S_IS_CALLNAME (add_symbolP))
- {
- /* Relocation should be done via the associated 'bal'
- entry point symbol. */
+ {
+ for (; fixP; fixP = fixP->fx_next)
+ seg_reloc_count++;
+ TC_ADJUST_RELOC_COUNT (fixP, seg_reloc_count);
+ return seg_reloc_count;
+ }
- if (!TC_S_IS_BALNAME (tc_get_bal_of_call (add_symbolP)))
- {
- as_bad ("No 'bal' entry point for leafproc %s",
- S_GET_NAME (add_symbolP));
- continue;
- }
- fixP->fx_addsy = add_symbolP = tc_get_bal_of_call (add_symbolP);
- }
+ for (; fixP; fixP = fixP->fx_next)
+ {
+ fragP = fixP->fx_frag;
+ know (fragP);
+ where = fixP->fx_where;
+ place = fragP->fr_literal + where;
+ size = fixP->fx_size;
+ add_symbolP = fixP->fx_addsy;
+#ifdef TC_VALIDATE_FIX
+ TC_VALIDATE_FIX (fixP, this_segment_type, skip);
#endif
- sub_symbolP = fixP->fx_subsy;
- add_number = fixP->fx_offset;
- pcrel = fixP->fx_pcrel;
-
- if (add_symbolP)
- add_symbol_segment = S_GET_SEGMENT (add_symbolP);
-
- if (sub_symbolP)
- {
- if (!add_symbolP)
- {
- /* Its just -sym */
- /* @@ Should try converting to pcrel ref to fixed addr. */
- if (S_GET_SEGMENT (sub_symbolP) != absolute_section)
- as_bad ("Negative of non-absolute symbol %s",
- S_GET_NAME (sub_symbolP));
-
+ sub_symbolP = fixP->fx_subsy;
+ add_number = fixP->fx_offset;
+ pcrel = fixP->fx_pcrel;
+
+ if (add_symbolP)
+ add_symbol_segment = S_GET_SEGMENT (add_symbolP);
+
+ if (sub_symbolP)
+ {
+ if (!add_symbolP)
+ {
+ /* Its just -sym */
+ if (S_GET_SEGMENT (sub_symbolP) == absolute_section)
add_number -= S_GET_VALUE (sub_symbolP);
- }
- else if ((S_GET_SEGMENT (sub_symbolP) == add_symbol_segment)
- && (SEG_NORMAL (add_symbol_segment)
- || (add_symbol_segment == absolute_section)))
- {
- /* Difference of 2 symbols from same segment.
- Can't make difference of 2 undefineds: 'value' means
- something different for N_UNDF. */
+ else if (pcrel
+ && S_GET_SEGMENT (sub_symbolP) == this_segment_type)
+ {
+ /* Should try converting to a constant. */
+ goto bad_sub_reloc;
+ }
+ else
+ bad_sub_reloc:
+ as_bad ("Negative of non-absolute symbol %s",
+ S_GET_NAME (sub_symbolP));
+ }
+ else if ((S_GET_SEGMENT (sub_symbolP) == add_symbol_segment)
+ && (SEG_NORMAL (add_symbol_segment)
+ || (add_symbol_segment == absolute_section)))
+ {
+ /* Difference of 2 symbols from same segment.
+ Can't make difference of 2 undefineds: 'value' means
+ something different for N_UNDF. */
#ifdef TC_I960
- /* Makes no sense to use the difference of 2 arbitrary symbols
- as the target of a call instruction. */
- if (fixP->fx_tcbit)
- {
- as_bad ("callj to difference of 2 symbols");
- }
+ /* Makes no sense to use the difference of 2 arbitrary symbols
+ as the target of a call instruction. */
+ if (fixP->fx_tcbit)
+ as_bad ("callj to difference of 2 symbols");
#endif /* TC_I960 */
- add_number += S_GET_VALUE (add_symbolP) -
- S_GET_VALUE (sub_symbolP);
+ add_number += S_GET_VALUE (add_symbolP) -
+ S_GET_VALUE (sub_symbolP);
- add_symbolP = NULL;
+ add_symbolP = NULL;
- /* Let the target machine make the final determination
- as to whether or not a relocation will be needed to
- handle this fixup. */
- if (!TC_FORCE_RELOCATION (fixP))
- fixP->fx_addsy = NULL;
- }
- else
- {
- /* Different segments in subtraction. */
- know (!(S_IS_EXTERNAL (sub_symbolP)
- && (S_GET_SEGMENT (sub_symbolP) == absolute_section)));
+ /* Let the target machine make the final determination
+ as to whether or not a relocation will be needed to
+ handle this fixup. */
+ if (!TC_FORCE_RELOCATION (fixP))
+ fixP->fx_addsy = NULL;
+ }
+ else
+ {
+ /* Different segments in subtraction. */
+ know (!(S_IS_EXTERNAL (sub_symbolP)
+ && (S_GET_SEGMENT (sub_symbolP) == absolute_section)));
+
+ if ((S_GET_SEGMENT (sub_symbolP) == absolute_section))
+ add_number -= S_GET_VALUE (sub_symbolP);
- if ((S_GET_SEGMENT (sub_symbolP) == absolute_section))
- {
- add_number -= S_GET_VALUE (sub_symbolP);
- }
#ifdef DIFF_EXPR_OK
- else if (S_GET_SEGMENT (sub_symbolP) == this_segment_type
-#if 0
- /* Do this even if it's already described as
- pc-relative. For example, on the m68k, an
- operand of "pc@(foo-.-2)" should address "foo"
- in a pc-relative mode. */
- && pcrel
+ else if (S_GET_SEGMENT (sub_symbolP) == this_segment_type
+#if 0 /* Do this even if it's already described as pc-relative. For example,
+ on the m68k, an operand of "pc@(foo-.-2)" should address "foo" in a
+ pc-relative mode. */
+ && pcrel
#endif
- )
- {
- /* Make it pc-relative. */
- add_number += (md_pcrel_from (fixP)
- - S_GET_VALUE (sub_symbolP));
- pcrel = 1;
- fixP->fx_pcrel = 1;
- sub_symbolP = 0;
- fixP->fx_subsy = 0;
- }
+ )
+ {
+ /* Make it pc-relative. */
+ add_number += (md_pcrel_from (fixP)
+ - S_GET_VALUE (sub_symbolP));
+ pcrel = 1;
+ fixP->fx_pcrel = 1;
+ sub_symbolP = 0;
+ fixP->fx_subsy = 0;
+ }
#endif
- else
- {
- char buf[50];
- sprint_value (buf, fragP->fr_address + where);
- as_bad ("Can't emit reloc {- %s-seg symbol \"%s\"} @ file address %s.",
- segment_name (S_GET_SEGMENT (sub_symbolP)),
- S_GET_NAME (sub_symbolP), buf);
- }
- }
- }
+ else
+ {
+ char buf[50];
+ sprint_value (buf, fragP->fr_address + where);
+ as_bad ("Can't emit reloc {- %s-seg symbol \"%s\"} @ file address %s.",
+ segment_name (S_GET_SEGMENT (sub_symbolP)),
+ S_GET_NAME (sub_symbolP), buf);
+ }
+ }
+ }
- if (add_symbolP)
- {
- if (add_symbol_segment == this_segment_type && pcrel)
- {
- /*
- * This fixup was made when the symbol's segment was
- * SEG_UNKNOWN, but it is now in the local segment.
- * So we know how to do the address without relocation.
- */
+ if (add_symbolP)
+ {
+ if (add_symbol_segment == this_segment_type && pcrel)
+ {
+ /*
+ * This fixup was made when the symbol's segment was
+ * SEG_UNKNOWN, but it is now in the local segment.
+ * So we know how to do the address without relocation.
+ */
#ifdef TC_I960
- /* reloc_callj() may replace a 'call' with a 'calls' or a
- 'bal', in which cases it modifies *fixP as appropriate.
- In the case of a 'calls', no further work is required,
- and *fixP has been set up to make the rest of the code
- below a no-op. */
- reloc_callj (fixP);
+ /* reloc_callj() may replace a 'call' with a 'calls' or a
+ 'bal', in which cases it modifies *fixP as appropriate.
+ In the case of a 'calls', no further work is required,
+ and *fixP has been set up to make the rest of the code
+ below a no-op. */
+ reloc_callj (fixP);
#endif /* TC_I960 */
- add_number += S_GET_VALUE (add_symbolP);
- add_number -= md_pcrel_from (fixP);
- pcrel = 0; /* Lie. Don't want further pcrel processing. */
-
- /* Let the target machine make the final determination
- as to whether or not a relocation will be needed to
- handle this fixup. */
- if (!TC_FORCE_RELOCATION (fixP))
- fixP->fx_addsy = NULL;
- }
- else
- {
- if (add_symbol_segment == absolute_section)
- {
+ add_number += S_GET_VALUE (add_symbolP);
+ add_number -= md_pcrel_from (fixP);
+ pcrel = 0; /* Lie. Don't want further pcrel processing. */
+
+ /* Let the target machine make the final determination
+ as to whether or not a relocation will be needed to
+ handle this fixup. */
+ if (!TC_FORCE_RELOCATION (fixP))
+ fixP->fx_addsy = NULL;
+ }
+ else
+ {
+ if (add_symbol_segment == absolute_section)
+ {
#ifdef TC_I960
- /* See comment about reloc_callj() above. */
- reloc_callj (fixP);
+ /* See comment about reloc_callj() above. */
+ reloc_callj (fixP);
#endif /* TC_I960 */
- add_number += S_GET_VALUE (add_symbolP);
-
- /* Let the target machine make the final determination
- as to whether or not a relocation will be needed to
- handle this fixup. */
- if (!TC_FORCE_RELOCATION (fixP))
- fixP->fx_addsy = NULL;
- add_symbolP = NULL;
- }
- else if (add_symbol_segment == undefined_section
+ add_number += S_GET_VALUE (add_symbolP);
+
+ /* Let the target machine make the final determination
+ as to whether or not a relocation will be needed to
+ handle this fixup. */
+ if (!TC_FORCE_RELOCATION (fixP))
+ fixP->fx_addsy = NULL;
+ add_symbolP = NULL;
+ }
+ else if (add_symbol_segment == undefined_section
#ifdef BFD_ASSEMBLER
- || bfd_is_com_section (add_symbol_segment)
+ || bfd_is_com_section (add_symbol_segment)
#endif
- )
- {
+ )
+ {
#ifdef TC_I960
- if ((int) fixP->fx_bit_fixP == 13)
- {
- /* This is a COBR instruction. They have only a
- * 13-bit displacement and are only to be used
- * for local branches: flag as error, don't generate
- * relocation.
- */
- as_bad ("can't use COBR format with external label");
-
- /* Let the target machine make the final determination
- as to whether or not a relocation will be needed to
- handle this fixup. */
- if (!TC_FORCE_RELOCATION (fixP))
- fixP->fx_addsy = NULL;
- continue;
- } /* COBR */
+ if ((int) fixP->fx_bit_fixP == 13)
+ {
+ /* This is a COBR instruction. They have only a
+ * 13-bit displacement and are only to be used
+ * for local branches: flag as error, don't generate
+ * relocation.
+ */
+ as_bad ("can't use COBR format with external label");
+
+ /* Let the target machine make the final determination
+ as to whether or not a relocation will be needed to
+ handle this fixup. */
+ if (!TC_FORCE_RELOCATION (fixP))
+ fixP->fx_addsy = NULL;
+ continue;
+ } /* COBR */
#endif /* TC_I960 */
-
+
#ifdef OBJ_COFF
#ifdef TE_I386AIX
- if (S_IS_COMMON (add_symbolP))
- add_number += S_GET_VALUE (add_symbolP);
+ if (S_IS_COMMON (add_symbolP))
+ add_number += S_GET_VALUE (add_symbolP);
#endif /* TE_I386AIX */
#endif /* OBJ_COFF */
- ++seg_reloc_count;
- }
- else
- {
- seg_reloc_count++;
- add_number += S_GET_VALUE (add_symbolP);
- }
- }
- }
+ ++seg_reloc_count;
+ }
+ else
+ {
+ seg_reloc_count++;
+ add_number += S_GET_VALUE (add_symbolP);
+ }
+ }
+ }
- if (pcrel)
- {
- add_number -= md_pcrel_from (fixP);
- if (add_symbolP == 0)
- {
- fixP->fx_addsy = &abs_symbol;
- ++seg_reloc_count;
- } /* if there's an add_symbol */
- } /* if pcrel */
+ if (pcrel)
+ {
+ add_number -= md_pcrel_from (fixP);
+ if (add_symbolP == 0)
+ {
+ fixP->fx_addsy = &abs_symbol;
+ ++seg_reloc_count;
+ } /* if there's an add_symbol */
+ } /* if pcrel */
- if (!fixP->fx_bit_fixP && size > 0)
- {
- valueT mask = 0;
- /* set all bits to one */
- mask--;
- /* Technically speaking, combining these produces an
- undefined result if size is sizeof (valueT), though I
- think these two half-way operations should both be
- defined. */
- mask <<= size * 4;
- mask <<= size * 4;
- if ((add_number & mask) != 0
- && (add_number & mask) != mask)
- {
- char buf[50], buf2[50];
- sprint_value (buf, fragP->fr_address + where);
- if (add_number > 1000)
- sprint_value (buf2, add_number);
- else
- sprintf (buf2, "%ld", (long) add_number);
- as_bad_where (fixP->fx_file, fixP->fx_line,
- "Value of %s too large for field of %d bytes at %s",
- buf2, size, buf);
- } /* generic error checking */
-#ifdef WARN_SIGNED_OVERFLOW_WORD
- /* Warn if a .word value is too large when treated as a signed
- number. We already know it is not too negative. This is to
- catch over-large switches generated by gcc on the 68k. */
- if (!flagseen['J']
- && size == 2
- && add_number > 0x7fff)
+ if (!fixP->fx_bit_fixP && size > 0)
+ {
+ valueT mask = 0;
+ /* set all bits to one */
+ mask--;
+ /* Technically speaking, combining these produces an
+ undefined result if size is sizeof (valueT), though I
+ think these two half-way operations should both be
+ defined. */
+ mask <<= size * 4;
+ mask <<= size * 4;
+ if ((add_number & mask) != 0
+ && (add_number & mask) != mask)
+ {
+ char buf[50], buf2[50];
+ sprint_value (buf, fragP->fr_address + where);
+ if (add_number > 1000)
+ sprint_value (buf2, add_number);
+ else
+ sprintf (buf2, "%ld", (long) add_number);
as_bad_where (fixP->fx_file, fixP->fx_line,
- "Signed .word overflow; switch may be too large; %ld at 0x%lx",
- (long) add_number,
- (unsigned long) (fragP->fr_address + where));
+ "Value of %s too large for field of %d bytes at %s",
+ buf2, size, buf);
+ } /* generic error checking */
+#ifdef WARN_SIGNED_OVERFLOW_WORD
+ /* Warn if a .word value is too large when treated as a signed
+ number. We already know it is not too negative. This is to
+ catch over-large switches generated by gcc on the 68k. */
+ if (!flagseen['J']
+ && size == 2
+ && add_number > 0x7fff)
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ "Signed .word overflow; switch may be too large; %ld at 0x%lx",
+ (long) add_number,
+ (unsigned long) (fragP->fr_address + where));
#endif
- } /* not a bit fix */
+ } /* not a bit fix */
#ifdef BFD_ASSEMBLER
- md_apply_fix (fixP, &add_number);
+ md_apply_fix (fixP, &add_number);
#else
- md_apply_fix (fixP, add_number);
+ md_apply_fix (fixP, add_number);
#endif
- } /* For each fixS in this segment. */
+ skip:
+ ;
+ } /* For each fixS in this segment. */
-#if defined (OBJ_COFF) && defined (TC_I960)
- {
- fixS *topP = fixP;
+ TC_ADJUST_RELOC_COUNT (fixP, seg_reloc_count);
+ return seg_reloc_count;
+}
- /* two relocs per callj under coff. */
- for (fixP = topP; fixP; fixP = fixP->fx_next)
- if (fixP->fx_tcbit && fixP->fx_addsy != 0)
- ++seg_reloc_count;
- }
-#endif /* OBJ_COFF && TC_I960 */
+#endif /* defined (BFD_ASSEMBLER) || !defined (BFD) */
- return (seg_reloc_count);
+void
+number_to_chars_bigendian (buf, val, n)
+ char *buf;
+ valueT val;
+ int n;
+{
+ if (n > sizeof (val)|| n <= 0)
+ abort ();
+ while (n--)
+ {
+ buf[n] = val & 0xff;
+ val >>= 8;
+ }
}
-#endif /* defined (BFD_ASSEMBLER) || !defined (BFD) */
+void
+number_to_chars_littleendian (buf, val, n)
+ char *buf;
+ valueT val;
+ int n;
+{
+ if (n > sizeof (val) || n <= 0)
+ abort ();
+ while (n--)
+ {
+ *buf++ = val & 0xff;
+ val >>= 8;
+ }
+}
/* end of write.c */
projects / platform / upstream / binutils.git / commitdiff