usb-serial: put subroutines in logical order

This patch (as1285) rearranges the subroutines in usb-serial.c
concerned with tty lifetimes into a more logical order: install, open,
hangup, close, release.  It also updates the formatting of the
kerneldoc comments.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index f1a1f0f..266dc58 100644 (file)
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -166,6 +166,41 @@ void usb_serial_put(struct usb_serial *serial)
 /*****************************************************************************
  * Driver tty interface functions
  *****************************************************************************/
+
+/**
+ * serial_install - install tty
+ * @driver: the driver (USB in our case)
+ * @tty: the tty being created
+ *
+ * Create the termios objects for this tty.  We use the default
+ * USB serial settings but permit them to be overridden by
+ * serial->type->init_termios.
+ */
+static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+       int idx = tty->index;
+       struct usb_serial *serial;
+       int retval;
+
+       /* If the termios setup has yet to be done */
+       if (tty->driver->termios[idx] == NULL) {
+               /* perform the standard setup */
+               retval = tty_init_termios(tty);
+               if (retval)
+                       return retval;
+               /* allow the driver to update it */
+               serial = usb_serial_get_by_index(tty->index);
+               if (serial->type->init_termios)
+                       serial->type->init_termios(tty);
+               usb_serial_put(serial);
+       }
+       /* Final install (we use the default method) */
+       tty_driver_kref_get(driver);
+       tty->count++;
+       driver->ttys[idx] = tty;
+       return 0;
+}
+
 static int serial_open (struct tty_struct *tty, struct file *filp)
 {
        struct usb_serial *serial;
@@ -264,13 +299,11 @@ bailout_serial_put:
 }
 
 /**
- *     serial_do_down          -       shut down hardware
- *     @port: port to shut down
+ * serial_do_down - shut down hardware
+ * @port: port to shut down
  *
- *     Shut down a USB port unless it is the console. We never shut down the
- *     console hardware as it will always be in use.
- *
- *     Don't free any resources at this point
+ * Shut down a USB serial port unless it is the console.  We never
+ * shut down the console hardware as it will always be in use.
  */
 static void serial_do_down(struct usb_serial_port *port)
 {
@@ -278,8 +311,10 @@ static void serial_do_down(struct usb_serial_port *port)
        struct usb_serial *serial;
        struct module *owner;
 
-       /* The console is magical, do not hang up the console hardware
-          or there will be tears */
+       /*
+        * The console is magical.  Do not hang up the console hardware
+        * or there will be tears.
+        */
        if (port->console)
                return;
 
@@ -293,24 +328,50 @@ static void serial_do_down(struct usb_serial_port *port)
        mutex_unlock(&port->mutex);
 }
 
+static void serial_hangup(struct tty_struct *tty)
+{
+       struct usb_serial_port *port = tty->driver_data;
+       serial_do_down(port);
+       tty_port_hangup(&port->port);
+       /* We must not free port yet - the USB serial layer depends on it's
+          continued existence */
+}
+
+static void serial_close(struct tty_struct *tty, struct file *filp)
+{
+       struct usb_serial_port *port = tty->driver_data;
+
+       if (!port)
+               return;
+
+       dbg("%s - port %d", __func__, port->number);
+
+       if (tty_port_close_start(&port->port, tty, filp) == 0)
+               return;
+       serial_do_down(port);
+       tty_port_close_end(&port->port, tty);
+       tty_port_tty_set(&port->port, NULL);
+
+}
+
 /**
- *     serial_do_free          -       free resources post close/hangup
- *     @port: port to free up
+ * serial_do_free - free resources post close/hangup
+ * @port: port to free up
  *
- *     Do the resource freeing and refcount dropping for the port. We must
- *     be careful about ordering and we must avoid freeing up the console.
+ * Do the resource freeing and refcount dropping for the port.
+ * Avoid freeing the console.
  *
- *     Called when the last tty kref is dropped.
+ * Called when the last tty kref is dropped.
  */
-
 static void serial_do_free(struct tty_struct *tty)
 {
        struct usb_serial_port *port = tty->driver_data;
        struct usb_serial *serial;
        struct module *owner;
 
-       /* The console is magical, do not hang up the console hardware
-          or there will be tears */
+       /* The console is magical.  Do not hang up the console hardware
+        * or there will be tears.
+        */
        if (port == NULL || port->console)
                return;
 
@@ -326,32 +387,6 @@ static void serial_do_free(struct tty_struct *tty)
        module_put(owner);
 }
 
-static void serial_close(struct tty_struct *tty, struct file *filp)
-{
-       struct usb_serial_port *port = tty->driver_data;
-
-       if (!port)
-               return;
-
-       dbg("%s - port %d", __func__, port->number);
-
-       if (tty_port_close_start(&port->port, tty, filp) == 0)
-               return;
-       serial_do_down(port);           
-       tty_port_close_end(&port->port, tty);
-       tty_port_tty_set(&port->port, NULL);
-
-}
-
-static void serial_hangup(struct tty_struct *tty)
-{
-       struct usb_serial_port *port = tty->driver_data;
-       serial_do_down(port);
-       tty_port_hangup(&port->port);
-       /* We must not free port yet - the USB serial layer depends on it's
-          continued existence */
-}
-
 static int serial_write(struct tty_struct *tty, const unsigned char *buf,
                                                                int count)
 {
@@ -699,41 +734,6 @@ static const struct tty_port_operations serial_port_ops = {
        .dtr_rts = serial_dtr_rts,
 };
 
-/**
- *     serial_install          -       install tty
- *     @driver: the driver (USB in our case)
- *     @tty: the tty being created
- *
- *     Create the termios objects for this tty. We use the default USB
- *     serial ones but permit them to be overriddenby serial->type->termios.
- *     This lets us remove all the ugly hackery
- */
-
-static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
-{
-       int idx = tty->index;
-       struct usb_serial *serial;
-       int retval;
-
-       /* If the termios setup has yet to be done */
-       if (tty->driver->termios[idx] == NULL) {
-               /* perform the standard setup */
-               retval = tty_init_termios(tty);
-               if (retval)
-                       return retval;
-               /* allow the driver to update it */
-               serial = usb_serial_get_by_index(tty->index);
-               if (serial->type->init_termios)
-                       serial->type->init_termios(tty);
-               usb_serial_put(serial);
-       }
-       /* Final install (we use the default method) */
-       tty_driver_kref_get(driver);
-       tty->count++;
-       driver->ttys[idx] = tty;
-       return 0;
-}
-
 int usb_serial_probe(struct usb_interface *interface,
                               const struct usb_device_id *id)
 {