arm64: dts: qcom: sc7180: Add remoteproc enablers

Add scm, smem, smp2p, aoss-qmp, aoss-cc and pdc-global device nodes
to SC7180 SoCs.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20191218143332.29107-1-sibis@codeaurora.org
[bjorn: Updated subject]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 3676bfd..4fe68e9 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -9,6 +9,9 @@
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
+#include <dt-bindings/power/qcom-aoss-qmp.h>
+#include <dt-bindings/reset/qcom,sdm845-aoss.h>
+#include <dt-bindings/reset/qcom,sdm845-pdc.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 
 / {
@@ -64,6 +67,10 @@
                aop_cmd_db_mem: memory@80820000 {
                        reg = <0x0 0x80820000 0x0 0x20000>;
                        compatible = "qcom,cmd-db";
+               };
+
+               smem_mem: memory@80900000 {
+                       reg = <0x0 0x80900000 0x0 0x200000>;
                        no-map;
                };
        };
@@ -191,6 +198,92 @@
                interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
        };
 
+       firmware {
+               scm {
+                       compatible = "qcom,scm-sc7180", "qcom,scm";
+               };
+       };
+
+       tcsr_mutex: hwlock {
+               compatible = "qcom,tcsr-mutex";
+               syscon = <&tcsr_mutex_regs 0 0x1000>;
+               #hwlock-cells = <1>;
+       };
+
+       smem {
+               compatible = "qcom,smem";
+               memory-region = <&smem_mem>;
+               hwlocks = <&tcsr_mutex 3>;
+       };
+
+       smp2p-cdsp {
+               compatible = "qcom,smp2p";
+               qcom,smem = <94>, <432>;
+
+               interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
+
+               mboxes = <&apss_shared 6>;
+
+               qcom,local-pid = <0>;
+               qcom,remote-pid = <5>;
+
+               cdsp_smp2p_out: master-kernel {
+                       qcom,entry-name = "master-kernel";
+                       #qcom,smem-state-cells = <1>;
+               };
+
+               cdsp_smp2p_in: slave-kernel {
+                       qcom,entry-name = "slave-kernel";
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+       };
+
+       smp2p-lpass {
+               compatible = "qcom,smp2p";
+               qcom,smem = <443>, <429>;
+
+               interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+               mboxes = <&apss_shared 10>;
+
+               qcom,local-pid = <0>;
+               qcom,remote-pid = <2>;
+
+               adsp_smp2p_out: master-kernel {
+                       qcom,entry-name = "master-kernel";
+                       #qcom,smem-state-cells = <1>;
+               };
+
+               adsp_smp2p_in: slave-kernel {
+                       qcom,entry-name = "slave-kernel";
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+       };
+
+       smp2p-mpss {
+               compatible = "qcom,smp2p";
+               qcom,smem = <435>, <428>;
+               interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+               mboxes = <&apss_shared 14>;
+               qcom,local-pid = <0>;
+               qcom,remote-pid = <1>;
+
+               modem_smp2p_out: master-kernel {
+                       qcom,entry-name = "master-kernel";
+                       #qcom,smem-state-cells = <1>;
+               };
+
+               modem_smp2p_in: slave-kernel {
+                       qcom,entry-name = "slave-kernel";
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+       };
+
        psci {
                compatible = "arm,psci-1.0";
                method = "smc";
@@ -642,6 +735,11 @@
                        };
                };
 
+               tcsr_mutex_regs: syscon@1f40000 {
+                       compatible = "syscon";
+                       reg = <0 0x01f40000 0 0x40000>;
+               };
+
                tlmm: pinctrl@3500000 {
                        compatible = "qcom,sc7180-pinctrl";
                        reg = <0 0x03500000 0 0x300000>,
@@ -1053,6 +1151,12 @@
                        interrupt-controller;
                };
 
+               pdc_reset: reset-controller@b2e0000 {
+                       compatible = "qcom,sc7180-pdc-global", "qcom,sdm845-pdc-global";
+                       reg = <0 0x0b2e0000 0 0x20000>;
+                       #reset-cells = <1>;
+               };
+
                tsens0: thermal-sensor@c263000 {
                        compatible = "qcom,sc7180-tsens","qcom,tsens-v2";
                        reg = <0 0x0c263000 0 0x1ff>, /* TM */
@@ -1073,6 +1177,22 @@
                        #thermal-sensor-cells = <1>;
                };
 
+               aoss_reset: reset-controller@c2a0000 {
+                       compatible = "qcom,sc7180-aoss-cc", "qcom,sdm845-aoss-cc";
+                       reg = <0 0x0c2a0000 0 0x31000>;
+                       #reset-cells = <1>;
+               };
+
+               aoss_qmp: qmp@c300000 {
+                       compatible = "qcom,sc7180-aoss-qmp";
+                       reg = <0 0x0c300000 0 0x100000>;
+                       interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
+                       mboxes = <&apss_shared 0>;
+
+                       #clock-cells = <0>;
+                       #power-domain-cells = <1>;
+               };
+
                spmi_bus: spmi@c440000 {
                        compatible = "qcom,spmi-pmic-arb";
                        reg = <0 0x0c440000 0 0x1100>,
@@ -1200,6 +1320,12 @@
                        };
                };
 
+               apss_shared: mailbox@17c00000 {
+                       compatible = "qcom,sc7180-apss-shared";
+                       reg = <0 0x17c00000 0 0x10000>;
+                       #mbox-cells = <1>;
+               };
+
                watchdog@17c10000 {
                        compatible = "qcom,apss-wdt-sc7180", "qcom,kpss-wdt";
                        reg = <0 0x17c10000 0 0x1000>;