Retire CONFIG_COMMANDS finally.
authorJon Loeliger <jdl@freescale.com>
Tue, 10 Jul 2007 00:12:30 +0000 (19:12 -0500)
committerJon Loeliger <jdl@freescale.com>
Tue, 10 Jul 2007 01:36:38 +0000 (20:36 -0500)
Strip old CFG_CMD_* symbols out.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
include/cmd_confdefs.h

index 9b4545f..3bfb2ae 100644 (file)
  * MA 02111-1307 USA
  */
 
-/*
- * Definitions for Configuring the monitor commands
- */
 #ifndef _CMD_CONFIG_H
 #define _CMD_CONFIG_H
 
 /*
- * Configurable monitor commands
- */
-#define CFG_CMD_BDI            0x00000001ULL   /* bdinfo                       */
-#define CFG_CMD_LOADS          0x00000002ULL   /* loads                        */
-#define CFG_CMD_LOADB          0x00000004ULL   /* loadb                        */
-#define CFG_CMD_IMI            0x00000008ULL   /* iminfo                       */
-#define CFG_CMD_CACHE          0x00000010ULL   /* icache, dcache               */
-#define CFG_CMD_FLASH          0x00000020ULL   /* flinfo, erase, protect       */
-#define CFG_CMD_MEMORY         0x00000040ULL   /* md, mm, nm, mw, cp, cmp,     */
-                                               /* crc, base, loop, mtest       */
-#define CFG_CMD_NET            0x00000080ULL   /* bootp, tftpboot, rarpboot    */
-#define CFG_CMD_ENV            0x00000100ULL   /* saveenv                      */
-#define CFG_CMD_KGDB           0x0000000000000200ULL   /* kgdb                         */
-#define CFG_CMD_PCMCIA         0x00000400ULL   /* PCMCIA support               */
-#define CFG_CMD_IDE            0x00000800ULL   /* IDE harddisk support         */
-#define CFG_CMD_PCI            0x00001000ULL   /* pciinfo                      */
-#define CFG_CMD_IRQ            0x00002000ULL   /* irqinfo                      */
-#define CFG_CMD_BOOTD          0x00004000ULL   /* bootd                        */
-#define CFG_CMD_CONSOLE                0x00008000ULL   /* coninfo                      */
-#define CFG_CMD_EEPROM         0x00010000ULL   /* EEPROM read/write support    */
-#define CFG_CMD_ASKENV         0x00020000ULL   /* ask for env variable         */
-#define CFG_CMD_RUN            0x00040000ULL   /* run command in env variable  */
-#define CFG_CMD_ECHO           0x00080000ULL   /* echo arguments               */
-#define CFG_CMD_I2C            0x00100000ULL   /* I2C serial bus support       */
-#define CFG_CMD_REGINFO                0x00200000ULL   /* Register dump                */
-#define CFG_CMD_IMMAP          0x00400000ULL   /* IMMR dump support            */
-#define CFG_CMD_DATE           0x00800000ULL   /* support for RTC, date/time...*/
-#define CFG_CMD_DHCP           0x01000000ULL   /* DHCP Support                 */
-#define CFG_CMD_BEDBUG         0x02000000ULL   /* Include BedBug Debugger      */
-#define CFG_CMD_FDC            0x04000000ULL   /* Floppy Disk Support          */
-#define CFG_CMD_SCSI           0x08000000ULL   /* SCSI Support                 */
-#define CFG_CMD_AUTOSCRIPT     0x10000000ULL   /* Autoscript Support           */
-#define CFG_CMD_MII            0x20000000ULL   /* MII support                  */
-#define CFG_CMD_SETGETDCR      0x40000000ULL   /* DCR support on 4xx           */
-#define CFG_CMD_BSP            0x80000000ULL   /* Board Specific functions     */
-
-#define CFG_CMD_ELF    0x0000000100000000ULL   /* ELF (VxWorks) load/boot cmd  */
-#define CFG_CMD_MISC   0x0000000200000000ULL   /* Misc functions like sleep etc*/
-#define CFG_CMD_USB    0x0000000400000000ULL   /* USB Support                  */
-#define CFG_CMD_DOC    0x0000000800000000ULL   /* Disk-On-Chip Support         */
-#define CFG_CMD_JFFS2  0x0000001000000000ULL   /* JFFS2 Support                */
-#define CFG_CMD_DTT    0x0000002000000000ULL   /* Digital Therm and Thermostat */
-#define CFG_CMD_SDRAM  0x0000004000000000ULL   /* SDRAM DIMM SPD info printout */
-#define CFG_CMD_DIAG   0x0000008000000000ULL   /* Diagnostics                  */
-#define CFG_CMD_FPGA   0x0000010000000000ULL   /* FPGA configuration Support   */
-#define CFG_CMD_HWFLOW 0x0000020000000000ULL   /* RTS/CTS hw flow control      */
-#define CFG_CMD_SAVES  0x0000040000000000ULL   /* save S record dump           */
-#define CFG_CMD_SPI    0x0000100000000000ULL   /* SPI utility                  */
-#define CFG_CMD_FDOS   0x0000200000000000ULL   /* Floppy DOS support           */
-#define CFG_CMD_VFD    0x0000400000000000ULL   /* VFD support (TRAB)           */
-#define CFG_CMD_NAND   0x0000800000000000ULL   /* NAND support                 */
-#define CFG_CMD_BMP    0x0001000000000000ULL   /* BMP support                  */
-#define CFG_CMD_PORTIO 0x0002000000000000ULL   /* Port I/O                     */
-#define CFG_CMD_PING   0x0004000000000000ULL   /* ping support                 */
-#define CFG_CMD_MMC    0x0008000000000000ULL   /* MMC support                  */
-#define CFG_CMD_FAT    0x0010000000000000ULL   /* FAT support                  */
-#define CFG_CMD_IMLS   0x0020000000000000ULL   /* List all found images        */
-#define CFG_CMD_ITEST  0x0040000000000000ULL   /* Integer (and string) test    */
-#define CFG_CMD_NFS    0x0080000000000000ULL   /* NFS support                  */
-#define CFG_CMD_REISER 0x0100000000000000ULL   /* Reiserfs support             */
-#define CFG_CMD_CDP    0x0200000000000000ULL   /* Cisco Discovery Protocol     */
-#define CFG_CMD_XIMG   0x0400000000000000ULL   /* Load part of Multi Image     */
-#define CFG_CMD_UNIVERSE 0x0800000000000000ULL /* Tundra Universe Support      */
-#define CFG_CMD_EXT2   0x1000000000000000ULL   /* EXT2 Support                 */
-#define CFG_CMD_SNTP   0x2000000000000000ULL   /* SNTP support                 */
-#define CFG_CMD_DISPLAY        0x4000000000000000ULL   /* Display support              */
-#define CFG_CMD_MFSL   0x8000000000000000ULL   /* FSL support for Microblaze   */
-
-#define CFG_CMD_ALL    0xFFFFFFFFFFFFFFFFULL   /* ALL commands                 */
-
-/* Commands that are considered "non-standard" for some reason
- * (memory hogs, requires special hardware, not fully tested, etc.)
- */
-#define CFG_CMD_NONSTD (CFG_CMD_ASKENV | \
-                       CFG_CMD_BEDBUG  | \
-                       CFG_CMD_BMP     | \
-                       CFG_CMD_BSP     | \
-                       CFG_CMD_CACHE   | \
-                       CFG_CMD_CDP     | \
-                       CFG_CMD_DATE    | \
-                       CFG_CMD_DHCP    | \
-                       CFG_CMD_DIAG    | \
-                       CFG_CMD_DISPLAY | \
-                       CFG_CMD_DOC     | \
-                       CFG_CMD_DTT     | \
-                       CFG_CMD_EEPROM  | \
-                       CFG_CMD_ELF     | \
-                       CFG_CMD_EXT2    | \
-                       CFG_CMD_FDC     | \
-                       CFG_CMD_FAT     | \
-                       CFG_CMD_FDOS    | \
-                       CFG_CMD_HWFLOW  | \
-                       CFG_CMD_I2C     | \
-                       CFG_CMD_IDE     | \
-                       CFG_CMD_IMMAP   | \
-                       CFG_CMD_IRQ     | \
-                       CFG_CMD_JFFS2   | \
-                       CFG_CMD_KGDB    | \
-                       CFG_CMD_MFSL    | \
-                       CFG_CMD_MII     | \
-                       CFG_CMD_MMC     | \
-                       CFG_CMD_NAND    | \
-                       CFG_CMD_PCI     | \
-                       CFG_CMD_PCMCIA  | \
-                       CFG_CMD_PING    | \
-                       CFG_CMD_PORTIO  | \
-                       CFG_CMD_REGINFO | \
-                       CFG_CMD_REISER  | \
-                       CFG_CMD_SAVES   | \
-                       CFG_CMD_SCSI    | \
-                       CFG_CMD_SDRAM   | \
-                       CFG_CMD_SNTP    | \
-                       CFG_CMD_SPI     | \
-                       CFG_CMD_UNIVERSE | \
-                       CFG_CMD_USB     | \
-                       CFG_CMD_VFD     )
-
-/* Default configuration
- */
-#define CONFIG_CMD_DFL (CFG_CMD_ALL & ~CFG_CMD_NONSTD)
-
-#ifndef CONFIG_COMMANDS
-#define CONFIG_COMMANDS CONFIG_CMD_DFL
-#endif
-
-
-/*
  * Temporary placeholder until all users directly
  * include the proper include file, "config_bootp.h".
  */