rockchip: rk3188: Setup the armclk in spl

The armclk starts in slow mode (24MHz) on the rk3188, which results in U-Boot
startup taking a lot of time (U-Boot itself, but also the rc4 decoding done
in the bootrom).

With default pmic settings we can always reach a safe frequency of 600MHz
which is also the frequency the proprietary loader left the armclk at,
without needing access to the systems pmic.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Simon Glass <sjg@chromium.org>

diff --git a/arch/arm/mach-rockchip/rk3188-board-spl.c b/arch/arm/mach-rockchip/rk3188-board-spl.c
index 117f6b8..c3e174d 100644 (file)
--- a/arch/arm/mach-rockchip/rk3188-board-spl.c
+++ b/arch/arm/mach-rockchip/rk3188-board-spl.c
@@ -4,6 +4,7 @@
  * SPDX-License-Identifier:     GPL-2.0+
  */
 
+#include <clk.h>
 #include <common.h>
 #include <debug_uart.h>
 #include <dm.h>
@@ -76,6 +77,27 @@ u32 spl_boot_mode(const u32 boot_device)
        return MMCSD_MODE_RAW;
 }
 
+static int setup_arm_clock(void)
+{
+       struct udevice *dev;
+       struct clk clk;
+       int ret;
+
+       ret = rockchip_get_clk(&dev);
+       if (ret)
+               return ret;
+
+       clk.id = CLK_ARM;
+       ret = clk_request(dev, &clk);
+       if (ret < 0)
+               return ret;
+
+       ret = clk_set_rate(&clk, 600000000);
+
+       clk_free(&clk);
+       return ret;
+}
+
 void board_init_f(ulong dummy)
 {
        struct udevice *pinctrl, *dev;
@@ -144,6 +166,8 @@ void board_init_f(ulong dummy)
                return;
        }
 
+       setup_arm_clock();
+
 #if defined(CONFIG_ROCKCHIP_SPL_BACK_TO_BROM) && !defined(CONFIG_SPL_BOARD_INIT)
        back_to_bootrom();
 #endif