m68knommu: merge ColdFire 5206 and 5206e platform code

The ColdFire 5206 and 5206e CPU families are almost identical, we can
easily merge the platform support code for them. All the differences
are dealt with in the current include/asm/5206sim.h.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

diff --git a/arch/m68k/Makefile_no b/arch/m68k/Makefile_no
index 81652ab..844d3f1 100644 (file)
--- a/arch/m68k/Makefile_no
+++ b/arch/m68k/Makefile_no
@@ -13,7 +13,7 @@ platform-$(CONFIG_M68EZ328)   := 68EZ328
 platform-$(CONFIG_M68VZ328)    := 68VZ328
 platform-$(CONFIG_M68360)      := 68360
 platform-$(CONFIG_M5206)       := 5206
-platform-$(CONFIG_M5206e)      := 5206e
+platform-$(CONFIG_M5206e)      := 5206
 platform-$(CONFIG_M520x)       := 520x
 platform-$(CONFIG_M523x)       := 523x
 platform-$(CONFIG_M5249)       := 5249

diff --git a/arch/m68k/platform/5206/config.c b/arch/m68k/platform/5206/config.c
index 9c33546..6fa3f80 100644 (file)
--- a/arch/m68k/platform/5206/config.c
+++ b/arch/m68k/platform/5206/config.c
@@ -98,6 +98,12 @@ void m5206_cpu_reset(void)
 
 void __init config_BSP(char *commandp, int size)
 {
+#if defined(CONFIG_NETtel)
+       /* Copy command line from FLASH to local buffer... */
+       memcpy(commandp, (char *) 0xf0004000, size);
+       commandp[size-1] = 0;
+#endif /* CONFIG_NETtel */
+
        mach_reset = m5206_cpu_reset;
        m5206_timers_init();
        m5206_uarts_init();

diff --git a/arch/m68k/platform/5206e/Makefile b/arch/m68k/platform/5206e/Makefile
deleted file mode 100644 (file)
index b5db056..0000000
--- a/arch/m68k/platform/5206e/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Makefile for the m68knommu linux kernel.
-#
-
-#
-# If you want to play with the HW breakpoints then you will
-# need to add define this,  which will give you a stack backtrace
-# on the console port whenever a DBG interrupt occurs.  You have to
-# set up you HW breakpoints to trigger a DBG interrupt:
-#
-# ccflags-y := -DTRAP_DBG_INTERRUPT
-# asflags-y := -DTRAP_DBG_INTERRUPT
-#
-
-asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
-
-obj-y := config.o gpio.o
-

diff --git a/arch/m68k/platform/5206e/config.c b/arch/m68k/platform/5206e/config.c
deleted file mode 100644 (file)
index 9423979..0000000
--- a/arch/m68k/platform/5206e/config.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/***************************************************************************/
-
-/*
- *     linux/arch/m68knommu/platform/5206e/config.c
- *
- *     Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <asm/machdep.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfuart.h>
-#include <asm/mcfdma.h>
-
-/***************************************************************************/
-
-static struct mcf_platform_uart m5206e_uart_platform[] = {
-       {
-               .mapbase        = MCF_MBAR + MCFUART_BASE1,
-               .irq            = 73,
-       },
-       {
-               .mapbase        = MCF_MBAR + MCFUART_BASE2,
-               .irq            = 74,
-       },
-       { },
-};
-
-static struct platform_device m5206e_uart = {
-       .name                   = "mcfuart",
-       .id                     = 0,
-       .dev.platform_data      = m5206e_uart_platform,
-};
-
-static struct platform_device *m5206e_devices[] __initdata = {
-       &m5206e_uart,
-};
-
-/***************************************************************************/
-
-static void __init m5206e_uart_init_line(int line, int irq)
-{
-       if (line == 0) {
-               writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
-               writeb(irq, MCFUART_BASE1 + MCFUART_UIVR);
-               mcf_mapirq2imr(irq, MCFINTC_UART0);
-       } else if (line == 1) {
-               writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
-               writeb(irq, MCFUART_BASE2 + MCFUART_UIVR);
-               mcf_mapirq2imr(irq, MCFINTC_UART1);
-       }
-}
-
-static void __init m5206e_uarts_init(void)
-{
-       const int nrlines = ARRAY_SIZE(m5206e_uart_platform);
-       int line;
-
-       for (line = 0; (line < nrlines); line++)
-               m5206e_uart_init_line(line, m5206e_uart_platform[line].irq);
-}
-
-/***************************************************************************/
-
-static void __init m5206e_timers_init(void)
-{
-       /* Timer1 is always used as system timer */
-       writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
-               MCF_MBAR + MCFSIM_TIMER1ICR);
-       mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
-
-#ifdef CONFIG_HIGHPROFILE
-       /* Timer2 is to be used as a high speed profile timer  */
-       writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
-               MCF_MBAR + MCFSIM_TIMER2ICR);
-       mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
-#endif
-}
-
-/***************************************************************************/
-
-void m5206e_cpu_reset(void)
-{
-       local_irq_disable();
-       /* Set watchdog to soft reset, and enabled */
-       __raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
-       for (;;)
-               /* wait for watchdog to timeout */;
-}
-
-/***************************************************************************/
-
-void __init config_BSP(char *commandp, int size)
-{
-#if defined(CONFIG_NETtel)
-       /* Copy command line from FLASH to local buffer... */
-       memcpy(commandp, (char *) 0xf0004000, size);
-       commandp[size-1] = 0;
-#endif /* CONFIG_NETtel */
-
-       mach_reset = m5206e_cpu_reset;
-       m5206e_timers_init();
-       m5206e_uarts_init();
-
-       /* Only support the external interrupts on their primary level */
-       mcf_mapirq2imr(25, MCFINTC_EINT1);
-       mcf_mapirq2imr(28, MCFINTC_EINT4);
-       mcf_mapirq2imr(31, MCFINTC_EINT7);
-}
-
-/***************************************************************************/
-
-static int __init init_BSP(void)
-{
-       platform_add_devices(m5206e_devices, ARRAY_SIZE(m5206e_devices));
-       return 0;
-}
-
-arch_initcall(init_BSP);
-
-/***************************************************************************/

diff --git a/arch/m68k/platform/5206e/gpio.c b/arch/m68k/platform/5206e/gpio.c
deleted file mode 100644 (file)
index b9ab4a1..0000000
--- a/arch/m68k/platform/5206e/gpio.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Coldfire generic GPIO support
- *
- * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
-
-static struct mcf_gpio_chip mcf_gpio_chips[] = {
-       {
-               .gpio_chip                      = {
-                       .label                  = "PP",
-                       .request                = mcf_gpio_request,
-                       .free                   = mcf_gpio_free,
-                       .direction_input        = mcf_gpio_direction_input,
-                       .direction_output       = mcf_gpio_direction_output,
-                       .get                    = mcf_gpio_get_value,
-                       .set                    = mcf_gpio_set_value,
-                       .ngpio                  = 8,
-               },
-               .pddr                           = (void __iomem *) MCFSIM_PADDR,
-               .podr                           = (void __iomem *) MCFSIM_PADAT,
-               .ppdr                           = (void __iomem *) MCFSIM_PADAT,
-       },
-};
-
-static int __init mcf_gpio_init(void)
-{
-       unsigned i = 0;
-       while (i < ARRAY_SIZE(mcf_gpio_chips))
-               (void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
-       return 0;
-}
-
-core_initcall(mcf_gpio_init);