V4L/DVB (8833): gspca: Cleanup the sonixb code.
authorHans de Goede <j.w.r.degoede@hhs.nl>
Wed, 3 Sep 2008 20:12:21 +0000 (17:12 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Wed, 3 Sep 2008 21:37:46 +0000 (18:37 -0300)
-the usb-id table caried several flags which were not usb-id specific but
 sensor specific, add a sensor_data array and move these flag there
-fr_h_sz was being abused to store and check which bridge was being used
 instead add a bridge member to the sd struct
-now that we have a sensor_data table use that to store pointers to
 init_sequences instead of using switch cases on sd->sensor

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/video/gspca/sonixb.c

index f30e6ec..8eaeaa3 100644 (file)
@@ -41,8 +41,12 @@ struct sd {
        unsigned char frames_to_drop;
        unsigned char freq;             /* light freq filter setting */
 
-       unsigned char fr_h_sz;          /* size of frame header */
-       char sensor;                    /* Type of image sensor chip */
+       __u8 bridge;                    /* Type of bridge */
+#define BRIDGE_101 0
+#define BRIDGE_102 0 /* We make no difference between 101 and 102 */
+#define BRIDGE_103 1
+
+       __u8 sensor;                    /* Type of image sensor chip */
 #define SENSOR_HV7131R 0
 #define SENSOR_OV6650 1
 #define SENSOR_OV7630 2
@@ -50,15 +54,31 @@ struct sd {
 #define SENSOR_PAS202 4
 #define SENSOR_TAS5110 5
 #define SENSOR_TAS5130CXX 6
-       char sensor_has_gain;
-       __u8 sensor_addr;
        __u8 reg11;
 };
 
-/* flags used in the device id table */
+typedef const __u8 sensor_init_t[8];
+
+struct sensor_data {
+       const __u8 *bridge_init[2];
+       int bridge_init_size[2];
+       sensor_init_t *sensor_init;
+       int sensor_init_size;
+       sensor_init_t *sensor_bridge_init[2];
+       int sensor_bridge_init_size[2];
+       int flags;
+       unsigned ctrl_dis;
+       __u8 sensor_addr;
+};
+
+/* sensor_data flags */
 #define F_GAIN 0x01            /* has gain */
 #define F_SIF  0x02            /* sif or vga */
-#define F_H18  0x04            /* long (18 b) or short (12 b) frame header */
+
+/* ctrl_dis helper macros */
+#define NO_EXPO ((1 << EXPOSURE_IDX) | (1 << AUTOGAIN_IDX))
+#define NO_FREQ (1 << FREQ_IDX)
+#define NO_BRIGHTNESS (1 << BRIGHTNESS_IDX)
 
 #define COMP2 0x8f
 #define COMP 0xc7              /* 0x87 //0x07 */
@@ -69,6 +89,18 @@ struct sd {
 
 #define SYS_CLK 0x04
 
+#define SENS(bridge_1, bridge_3, sensor, sensor_1, \
+       sensor_3, _flags, _ctrl_dis, _sensor_addr) \
+{ \
+       .bridge_init = { bridge_1, bridge_3 }, \
+       .bridge_init_size = { sizeof(bridge_1), sizeof(bridge_3) }, \
+       .sensor_init = sensor, \
+       .sensor_init_size = sizeof(sensor), \
+       .sensor_bridge_init = { sensor_1, sensor_3,}, \
+       .sensor_bridge_init_size = { sizeof(sensor_1), sizeof(sensor_3)}, \
+       .flags = _flags, .ctrl_dis = _ctrl_dis, .sensor_addr = _sensor_addr \
+}
+
 /* We calculate the autogain at the end of the transfer of a frame, at this
    moment a frame with the old settings is being transmitted, and a frame is
    being captured with the old settings. So if we adjust the autogain we must
@@ -219,7 +251,7 @@ static const __u8 hv7131_sensor_init[][8] = {
 static const __u8 initOv6650[] = {
        0x44, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
        0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-       0x00, 0x02, 0x01, 0x0a, 0x16, 0x12, 0x68, 0x0b,
+       0x00, 0x02, 0x01, 0x0a, 0x16, 0x12, 0x68, 0x8b,
        0x10, 0x1d, 0x10, 0x00, 0x06, 0x1f, 0x00
 };
 static const __u8 ov6650_sensor_init[][8] =
@@ -260,7 +292,7 @@ static const __u8 initOv7630[] = {
        0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* r09 .. r10 */
        0x00, 0x02, 0x01, 0x0a,                         /* r11 .. r14 */
        0x28, 0x1e,                     /* H & V sizes     r15 .. r16 */
-       0x68, COMP1, MCK_INIT1,                         /* r17 .. r19 */
+       0x68, COMP2, MCK_INIT1,                         /* r17 .. r19 */
        0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c              /* r1a .. r1f */
 };
 static const __u8 initOv7630_3[] = {
@@ -295,47 +327,65 @@ static const __u8 ov7630_sensor_init[][8] = {
        {0xd0, 0x21, 0x17, 0x1c, 0xbd, 0x06, 0xf6, 0x10},
 };
 
+static const __u8 ov7630_sensor_init_3[][8] = {
+       {0xa0, 0x21, 0x13, 0x80, 0x00,  0x00, 0x00, 0x10},
+};
+
 static const __u8 initPas106[] = {
        0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x81, 0x40, 0x00, 0x00, 0x00,
        0x00, 0x00,
        0x00, 0x00, 0x00, 0x05, 0x01, 0x00,
-       0x16, 0x12, 0x28, COMP1, MCK_INIT1,
+       0x16, 0x12, 0x24, COMP1, MCK_INIT1,
        0x18, 0x10, 0x04, 0x03, 0x11, 0x0c
 };
 /* compression 0x86 mckinit1 0x2b */
-static const __u8 pas106_data[][2] = {
-       {0x02, 0x04},           /* Pixel Clock Divider 6 */
-       {0x03, 0x13},           /* Frame Time MSB */
-/*     {0x03, 0x12},            * Frame Time MSB */
-       {0x04, 0x06},           /* Frame Time LSB */
-/*     {0x04, 0x05},            * Frame Time LSB */
-       {0x05, 0x65},           /* Shutter Time Line Offset */
-/*     {0x05, 0x6d},            * Shutter Time Line Offset */
-/*     {0x06, 0xb1},            * Shutter Time Pixel Offset */
-       {0x06, 0xcd},           /* Shutter Time Pixel Offset */
-       {0x07, 0xc1},           /* Black Level Subtract Sign */
-/*     {0x07, 0x00},            * Black Level Subtract Sign */
-       {0x08, 0x06},           /* Black Level Subtract Level */
-       {0x08, 0x06},           /* Black Level Subtract Level */
-/*     {0x08, 0x01},            * Black Level Subtract Level */
-       {0x09, 0x05},           /* Color Gain B Pixel 5 a */
-       {0x0a, 0x04},           /* Color Gain G1 Pixel 1 5 */
-       {0x0b, 0x04},           /* Color Gain G2 Pixel 1 0 5 */
-       {0x0c, 0x05},           /* Color Gain R Pixel 3 1 */
-       {0x0d, 0x00},           /* Color GainH  Pixel */
-       {0x0e, 0x0e},           /* Global Gain */
-       {0x0f, 0x00},           /* Contrast */
-       {0x10, 0x06},           /* H&V synchro polarity */
-       {0x11, 0x06},           /* ?default */
-       {0x12, 0x06},           /* DAC scale */
-       {0x14, 0x02},           /* ?default */
-       {0x13, 0x01},           /* Validate Settings */
+static const __u8 pas106_sensor_init[][8] = {
+       /* Pixel Clock Divider 6 */
+       { 0xa1, 0x40, 0x02, 0x04, 0x00, 0x00, 0x00, 0x14 },
+       /* Frame Time MSB (also seen as 0x12) */
+       { 0xa1, 0x40, 0x03, 0x13, 0x00, 0x00, 0x00, 0x14 },
+       /* Frame Time LSB (also seen as 0x05) */
+       { 0xa1, 0x40, 0x04, 0x06, 0x00, 0x00, 0x00, 0x14 },
+       /* Shutter Time Line Offset (also seen as 0x6d) */
+       { 0xa1, 0x40, 0x05, 0x65, 0x00, 0x00, 0x00, 0x14 },
+       /* Shutter Time Pixel Offset (also seen as 0xb1) */
+       { 0xa1, 0x40, 0x06, 0xcd, 0x00, 0x00, 0x00, 0x14 },
+       /* Black Level Subtract Sign (also seen 0x00) */
+       { 0xa1, 0x40, 0x07, 0xc1, 0x00, 0x00, 0x00, 0x14 },
+       /* Black Level Subtract Level (also seen 0x01) */
+       { 0xa1, 0x40, 0x08, 0x06, 0x00, 0x00, 0x00, 0x14 },
+       { 0xa1, 0x40, 0x08, 0x06, 0x00, 0x00, 0x00, 0x14 },
+       /* Color Gain B Pixel 5 a */
+       { 0xa1, 0x40, 0x09, 0x05, 0x00, 0x00, 0x00, 0x14 },
+       /* Color Gain G1 Pixel 1 5 */
+       { 0xa1, 0x40, 0x0a, 0x04, 0x00, 0x00, 0x00, 0x14 },
+       /* Color Gain G2 Pixel 1 0 5 */
+       { 0xa1, 0x40, 0x0b, 0x04, 0x00, 0x00, 0x00, 0x14 },
+       /* Color Gain R Pixel 3 1 */
+       { 0xa1, 0x40, 0x0c, 0x05, 0x00, 0x00, 0x00, 0x14 },
+       /* Color GainH  Pixel */
+       { 0xa1, 0x40, 0x0d, 0x00, 0x00, 0x00, 0x00, 0x14 },
+       /* Global Gain */
+       { 0xa1, 0x40, 0x0e, 0x0e, 0x00, 0x00, 0x00, 0x14 },
+       /* Contrast */
+       { 0xa1, 0x40, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x14 },
+       /* H&V synchro polarity */
+       { 0xa1, 0x40, 0x10, 0x06, 0x00, 0x00, 0x00, 0x14 },
+       /* ?default */
+       { 0xa1, 0x40, 0x11, 0x06, 0x00, 0x00, 0x00, 0x14 },
+       /* DAC scale */
+       { 0xa1, 0x40, 0x12, 0x06, 0x00, 0x00, 0x00, 0x14 },
+       /* ?default */
+       { 0xa1, 0x40, 0x14, 0x02, 0x00, 0x00, 0x00, 0x14 },
+       /* Validate Settings */
+       { 0xa1, 0x40, 0x13, 0x01, 0x00, 0x00, 0x00, 0x14 },
 };
+
 static const __u8 initPas202[] = {
        0x44, 0x44, 0x21, 0x30, 0x00, 0x00, 0x00, 0x80, 0x40, 0x00, 0x00, 0x00,
        0x00, 0x00,
        0x00, 0x00, 0x00, 0x07, 0x03, 0x0a,     /* 6 */
-       0x28, 0x1e, 0x28, 0x89, 0x30,
+       0x28, 0x1e, 0x28, 0x89, 0x20,
        0x00, 0x00, 0x02, 0x03, 0x0f, 0x0c
 };
 static const __u8 pas202_sensor_init[][8] = {
@@ -390,6 +440,21 @@ static const __u8 tas5130_sensor_init[][8] = {
        {0x30, 0x11, 0x02, 0x20, 0x70, 0x00, 0x00, 0x10},
 };
 
+struct sensor_data sensor_data[] = {
+SENS(initHv7131, NULL, hv7131_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ, 0),
+SENS(initOv6650, NULL, ov6650_sensor_init, NULL, NULL, F_GAIN|F_SIF, 0, 0x60),
+SENS(initOv7630, initOv7630_3, ov7630_sensor_init, NULL, ov7630_sensor_init_3,
+       F_GAIN, 0, 0x21),
+SENS(initPas106, NULL, pas106_sensor_init, NULL, NULL, F_SIF, NO_EXPO|NO_FREQ,
+       0),
+SENS(initPas202, initPas202, pas202_sensor_init, NULL, NULL, 0,
+       NO_EXPO|NO_FREQ, 0),
+SENS(initTas5110, NULL, tas5110_sensor_init, NULL, NULL, F_GAIN|F_SIF,
+       NO_BRIGHTNESS|NO_FREQ, 0),
+SENS(initTas5130, NULL, tas5130_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ,
+       0),
+};
+
 /* get one byte in gspca_dev->usb_buf */
 static void reg_r(struct gspca_dev *gspca_dev,
                  __u16 value)
@@ -468,7 +533,7 @@ static void setbrightness(struct gspca_dev *gspca_dev)
                        {0xa0, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x10};
 
                /* change reg 0x06 */
-               i2cOV[1] = sd->sensor_addr;
+               i2cOV[1] = sensor_data[sd->sensor].sensor_addr;
                i2cOV[3] = sd->brightness;
                if (i2c_w(gspca_dev, i2cOV) < 0)
                        goto err;
@@ -555,7 +620,7 @@ static void setsensorgain(struct gspca_dev *gspca_dev)
        case SENSOR_OV7630: {
                __u8 i2c[] = {0xa0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10};
 
-               i2c[1] = sd->sensor_addr;
+               i2c[1] = sensor_data[sd->sensor].sensor_addr;
                i2c[3] = gain >> 2;
                if (i2c_w(gspca_dev, i2c) < 0)
                        goto err;
@@ -582,7 +647,7 @@ static void setgain(struct gspca_dev *gspca_dev)
        rgb_value = gain;
        reg_w(gspca_dev, 0x11, &rgb_value, 1);
 
-       if (sd->sensor_has_gain)
+       if (sensor_data[sd->sensor].flags & F_GAIN)
                setsensorgain(gspca_dev);
 }
 
@@ -662,7 +727,7 @@ static void setexposure(struct gspca_dev *gspca_dev)
                        reg10 = reg10_max;
 
                /* Write reg 10 and reg11 low nibble */
-               i2c[1] = sd->sensor_addr;
+               i2c[1] = sensor_data[sd->sensor].sensor_addr;
                i2c[3] = reg10;
                i2c[4] |= reg11 - 1;
 
@@ -702,7 +767,7 @@ static void setfreq(struct gspca_dev *gspca_dev)
                                        ? 0x4f : 0x8a;
                        break;
                }
-               i2c[1] = sd->sensor_addr;
+               i2c[1] = sensor_data[sd->sensor].sensor_addr;
                if (i2c_w(gspca_dev, i2c) < 0)
                        PDEBUG(D_ERR, "i2c error setfreq");
                break;
@@ -735,28 +800,19 @@ static int sd_config(struct gspca_dev *gspca_dev,
 {
        struct sd *sd = (struct sd *) gspca_dev;
        struct cam *cam;
-       int sif = 0;
 
        reg_r(gspca_dev, 0x00);
        if (gspca_dev->usb_buf[0] != 0x10)
                return -ENODEV;
 
        /* copy the webcam info from the device id */
-       sd->sensor = (id->driver_info >> 24) & 0xff;
-       if (id->driver_info & (F_GAIN << 16))
-               sd->sensor_has_gain = 1;
-       if (id->driver_info & (F_SIF << 16))
-               sif = 1;
-       if (id->driver_info & (F_H18 << 16))
-               sd->fr_h_sz = 18;               /* size of frame header */
-       else
-               sd->fr_h_sz = 12;
-       gspca_dev->ctrl_dis = (id->driver_info >> 8) & 0xff;
-       sd->sensor_addr = id->driver_info & 0xff;
+       sd->sensor = id->driver_info >> 8;
+       sd->bridge = id->driver_info & 0xff;
+       gspca_dev->ctrl_dis = sensor_data[sd->sensor].ctrl_dis;
 
        cam = &gspca_dev->cam;
        cam->epaddr = 0x01;
-       if (!sif) {
+       if (!(sensor_data[sd->sensor].flags & F_SIF)) {
                cam->cam_mode = vga_mode;
                cam->nmodes = ARRAY_SIZE(vga_mode);
        } else {
@@ -785,78 +841,29 @@ static int sd_init(struct gspca_dev *gspca_dev)
        return 0;
 }
 
-static void pas106_i2cinit(struct gspca_dev *gspca_dev)
-{
-       int i;
-       const __u8 *data;
-       __u8 i2c1[] = { 0xa1, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x14 };
-
-       i = ARRAY_SIZE(pas106_data);
-       data = pas106_data[0];
-       while (--i >= 0) {
-               memcpy(&i2c1[2], data, 2);
-                                       /* copy 2 bytes from the template */
-               if (i2c_w(gspca_dev, i2c1) < 0)
-                       PDEBUG(D_ERR, "i2c error pas106");
-               data += 2;
-       }
-}
-
 /* -- start the camera -- */
 static void sd_start(struct gspca_dev *gspca_dev)
 {
        struct sd *sd = (struct sd *) gspca_dev;
-       int mode, l = 0x1f;
+       int mode, l;
        const __u8 *sn9c10x;
        __u8 reg17_19[3];
 
-       mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
+       mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 0x07;
+       sn9c10x = sensor_data[sd->sensor].bridge_init[sd->bridge];
+       l = sensor_data[sd->sensor].bridge_init_size[sd->bridge];
+       reg17_19[0] = sn9c10x[0x17 - 1];
+       reg17_19[1] = sn9c10x[0x18 - 1] | (mode << 4);
+       reg17_19[2] = sn9c10x[0x19 - 1];
+       /* Special cases where reg 17 and or 19 value depends on mode */
        switch (sd->sensor) {
-       case SENSOR_HV7131R:
-               sn9c10x = initHv7131;
-               reg17_19[0] = 0x60;
-               reg17_19[1] = (mode << 4) | 0x8a;
-               reg17_19[2] = 0x20;
-               break;
-       case SENSOR_OV6650:
-               sn9c10x = initOv6650;
-               reg17_19[0] = 0x68;
-               reg17_19[1] = (mode << 4) | 0x8b;
-               reg17_19[2] = 0x20;
-               break;
-       case SENSOR_OV7630:
-               if (sd->fr_h_sz == 18) { /* SN9C103 */
-                       sn9c10x = initOv7630_3;
-                       l = sizeof initOv7630_3;
-               } else
-                       sn9c10x = initOv7630;
-               reg17_19[0] = 0x68;
-               reg17_19[1] = (mode << 4) | COMP2;
-               reg17_19[2] = MCK_INIT1;
-               break;
-       case SENSOR_PAS106:
-               sn9c10x = initPas106;
-               reg17_19[0] = 0x24;             /* 0x28 */
-               reg17_19[1] = (mode << 4) | COMP1;
-               reg17_19[2] = MCK_INIT1;
-               break;
        case SENSOR_PAS202:
-               sn9c10x = initPas202;
                reg17_19[0] = mode ? 0x24 : 0x20;
-               reg17_19[1] = (mode << 4) | 0x89;
-               reg17_19[2] = 0x20;
                break;
-       case SENSOR_TAS5110:
-               sn9c10x = initTas5110;
-               reg17_19[0] = 0x60;
-               reg17_19[1] = (mode << 4) | 0x86;
-               reg17_19[2] = 0x2b;             /* 0xf3; */
-               break;
-       default:
-/*     case SENSOR_TAS5130CXX: */
-               sn9c10x = initTas5130;
-               reg17_19[0] = 0x60;
-               reg17_19[1] = (mode << 4) | COMP;
+       case SENSOR_TAS5130CXX:
+               /* probably not mode specific at all most likely the upper
+                  nibble of 0x19 is exposure (clock divider) just as with
+                  the tas5110, we need someone to test this. */
                reg17_19[2] = mode ? 0x23 : 0x43;
                break;
        }
@@ -867,41 +874,16 @@ static void sd_start(struct gspca_dev *gspca_dev)
        reg_w(gspca_dev, 0x17, &sn9c10x[0x17 - 1], 1);
        /* Set the registers from the template */
        reg_w(gspca_dev, 0x01, sn9c10x, l);
-       switch (sd->sensor) {
-       case SENSOR_HV7131R:
-               i2c_w_vector(gspca_dev, hv7131_sensor_init,
-                               sizeof hv7131_sensor_init);
-               break;
-       case SENSOR_OV6650:
-               i2c_w_vector(gspca_dev, ov6650_sensor_init,
-                               sizeof ov6650_sensor_init);
-               break;
-       case SENSOR_OV7630:
-               i2c_w_vector(gspca_dev, ov7630_sensor_init,
-                               sizeof ov7630_sensor_init);
-               if (sd->fr_h_sz == 18) { /* SN9C103 */
-                       const __u8 i2c[] = { 0xa0, 0x21, 0x13, 0x80, 0x00,
-                                               0x00, 0x00, 0x10 };
-                       i2c_w(gspca_dev, i2c);
-               }
-               break;
-       case SENSOR_PAS106:
-               pas106_i2cinit(gspca_dev);
-               break;
-       case SENSOR_PAS202:
-               i2c_w_vector(gspca_dev, pas202_sensor_init,
-                               sizeof pas202_sensor_init);
-               break;
-       case SENSOR_TAS5110:
-               i2c_w_vector(gspca_dev, tas5110_sensor_init,
-                               sizeof tas5110_sensor_init);
-               break;
-       default:
-/*     case SENSOR_TAS5130CXX: */
-               i2c_w_vector(gspca_dev, tas5130_sensor_init,
-                               sizeof tas5130_sensor_init);
-               break;
-       }
+
+       /* Init the sensor */
+       i2c_w_vector(gspca_dev, sensor_data[sd->sensor].sensor_init,
+                       sensor_data[sd->sensor].sensor_init_size);
+       if (sensor_data[sd->sensor].sensor_bridge_init[sd->bridge])
+               i2c_w_vector(gspca_dev,
+                       sensor_data[sd->sensor].sensor_bridge_init[sd->bridge],
+                       sensor_data[sd->sensor].sensor_bridge_init_size[
+                               sd->bridge]);
+
        /* H_size V_size 0x28, 0x1e -> 640x480. 0x16, 0x12 -> 352x288 */
        reg_w(gspca_dev, 0x15, &sn9c10x[0x15 - 1], 2);
        /* compression register */
@@ -937,10 +919,7 @@ static void sd_start(struct gspca_dev *gspca_dev)
 
 static void sd_stopN(struct gspca_dev *gspca_dev)
 {
-       __u8 ByteSend;
-
-       ByteSend = 0x09;        /* 0X00 */
-       reg_w(gspca_dev, 0x01, &ByteSend, 1);
+       sd_init(gspca_dev);
 }
 
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
@@ -970,15 +949,17 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
                            && data[5 + i] == 0x96) {   /* start of frame */
                                int lum = -1;
                                int pkt_type = LAST_PACKET;
+                               int fr_h_sz = (sd->bridge == BRIDGE_103) ?
+                                       18 : 12;
 
-                               if (len - i < sd->fr_h_sz) {
+                               if (len - i < fr_h_sz) {
                                        PDEBUG(D_STREAM, "packet too short to"
                                                " get avg brightness");
-                               } else if (sd->fr_h_sz == 12) {
-                                       lum = data[i + 8] + (data[i + 9] << 8);
-                               } else {
+                               } else if (sd->bridge == BRIDGE_103) {
                                        lum = data[i + 9] +
                                                (data[i + 10] << 8);
+                               } else {
+                                       lum = data[i + 8] + (data[i + 9] << 8);
                                }
                                if (lum == 0) {
                                        lum = -1;
@@ -993,8 +974,8 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 
                                frame = gspca_frame_add(gspca_dev, pkt_type,
                                                        frame, data, 0);
-                               data += i + sd->fr_h_sz;
-                               len -= i + sd->fr_h_sz;
+                               data += i + fr_h_sz;
+                               len -= i + fr_h_sz;
                                gspca_frame_add(gspca_dev, FIRST_PACKET,
                                                frame, data, len);
                                return;
@@ -1143,55 +1124,33 @@ static const struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define SFCI(sensor, flags, disable_ctrls, i2c_addr) \
-       .driver_info = (SENSOR_ ## sensor << 24) \
-                       | ((flags) << 16) \
-                       | ((disable_ctrls) << 8) \
-                       | (i2c_addr)
-#define NO_EXPO ((1 << EXPOSURE_IDX) | (1 << AUTOGAIN_IDX))
-#define NO_FREQ (1 << FREQ_IDX)
-#define NO_BRIGHTNESS (1 << BRIGHTNESS_IDX)
+#define SB(sensor, bridge) \
+       .driver_info = (SENSOR_ ## sensor << 8) | BRIDGE_ ## bridge
+
 
 static __devinitdata struct usb_device_id device_table[] = {
 #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
-       {USB_DEVICE(0x0c45, 0x6001),                    /* SN9C102 */
-                       SFCI(TAS5110, F_GAIN|F_SIF, NO_BRIGHTNESS|NO_FREQ, 0)},
-       {USB_DEVICE(0x0c45, 0x6005),                    /* SN9C101 */
-                       SFCI(TAS5110, F_GAIN|F_SIF, NO_BRIGHTNESS|NO_FREQ, 0)},
-       {USB_DEVICE(0x0c45, 0x6007),                    /* SN9C101 */
-                       SFCI(TAS5110, F_GAIN|F_SIF, NO_BRIGHTNESS|NO_FREQ, 0)},
-       {USB_DEVICE(0x0c45, 0x6009),                    /* SN9C101 */
-                       SFCI(PAS106, F_SIF, NO_EXPO|NO_FREQ, 0)},
-       {USB_DEVICE(0x0c45, 0x600d),                    /* SN9C101 */
-                       SFCI(PAS106, F_SIF, NO_EXPO|NO_FREQ, 0)},
+       {USB_DEVICE(0x0c45, 0x6001), SB(TAS5110, 102)},
+       {USB_DEVICE(0x0c45, 0x6005), SB(TAS5110, 101)},
+       {USB_DEVICE(0x0c45, 0x6007), SB(TAS5110, 101)},
+       {USB_DEVICE(0x0c45, 0x6009), SB(PAS106, 101)},
+       {USB_DEVICE(0x0c45, 0x600d), SB(PAS106, 101)},
 #endif
-       {USB_DEVICE(0x0c45, 0x6011),            /* SN9C101 - SN9C101G */
-                       SFCI(OV6650, F_GAIN|F_SIF, 0, 0x60)},
+       {USB_DEVICE(0x0c45, 0x6011), SB(OV6650, 101)},
 #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
-       {USB_DEVICE(0x0c45, 0x6019),                    /* SN9C101 */
-                       SFCI(OV7630, F_GAIN, 0, 0x21)},
-       {USB_DEVICE(0x0c45, 0x6024),                    /* SN9C102 */
-                       SFCI(TAS5130CXX, 0, NO_EXPO|NO_FREQ, 0)},
-       {USB_DEVICE(0x0c45, 0x6025),                    /* SN9C102 */
-                       SFCI(TAS5130CXX, 0, NO_EXPO|NO_FREQ, 0)},
-       {USB_DEVICE(0x0c45, 0x6028),                    /* SN9C102 */
-                       SFCI(PAS202, 0, NO_EXPO|NO_FREQ, 0)},
-       {USB_DEVICE(0x0c45, 0x6029),                    /* SN9C101 */
-                       SFCI(PAS106, F_SIF, NO_EXPO|NO_FREQ, 0)},
-       {USB_DEVICE(0x0c45, 0x602c),                    /* SN9C102 */
-                       SFCI(OV7630, F_GAIN, 0, 0x21)},
+       {USB_DEVICE(0x0c45, 0x6019), SB(OV7630, 101)},
+       {USB_DEVICE(0x0c45, 0x6024), SB(TAS5130CXX, 102)},
+       {USB_DEVICE(0x0c45, 0x6025), SB(TAS5130CXX, 102)},
+       {USB_DEVICE(0x0c45, 0x6028), SB(PAS202, 102)},
+       {USB_DEVICE(0x0c45, 0x6029), SB(PAS106, 102)},
+       {USB_DEVICE(0x0c45, 0x602c), SB(OV7630, 102)},
 #endif
-       {USB_DEVICE(0x0c45, 0x602d),                    /* SN9C102 */
-                       SFCI(HV7131R, 0, NO_EXPO|NO_FREQ, 0)},
+       {USB_DEVICE(0x0c45, 0x602d), SB(HV7131R, 102)},
 #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
-       {USB_DEVICE(0x0c45, 0x602e),                    /* SN9C102 */
-                       SFCI(OV7630, F_GAIN, 0, 0x21)},
-       {USB_DEVICE(0x0c45, 0x608f),                    /* SN9C103 */
-                       SFCI(OV7630, F_GAIN|F_H18, 0, 0x21)},
-       {USB_DEVICE(0x0c45, 0x60af),                    /* SN9C103 */
-                       SFCI(PAS202, F_H18, NO_EXPO|NO_FREQ, 0)},
-       {USB_DEVICE(0x0c45, 0x60b0),                    /* SN9C103 */
-                       SFCI(OV7630, F_GAIN|F_H18, 0, 0x21)},
+       {USB_DEVICE(0x0c45, 0x602e), SB(OV7630, 102)},
+       {USB_DEVICE(0x0c45, 0x608f), SB(OV7630, 103)},
+       {USB_DEVICE(0x0c45, 0x60af), SB(PAS202, 103)},
+       {USB_DEVICE(0x0c45, 0x60b0), SB(OV7630, 103)},
 #endif
        {}
 };