spi: zynq_[q]spi: Convert config's to macro's

Remove below config options and convert them to macros. They have never
been configured to different values than default one. And also it makes
sense to reduce the config_whitelist.
CONFIG_SYS_ZYNQ_SPI_WAIT
CONFIG_SYS_ZYNQ_QSPI_WAIT
CONFIG_XILINX_SPI_IDLE_VAL

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c
index 05768ee..348630f 100644 (file)
--- a/drivers/spi/xilinx_spi.c
+++ b/drivers/spi/xilinx_spi.c
@@ -76,9 +76,7 @@
                                SPICR_SPE)
 #define XILSPI_SPICR_DFLT_OFF  (SPICR_MASTER_INHIBIT | SPICR_MANUAL_SS)
 
-#ifndef CONFIG_XILINX_SPI_IDLE_VAL
-#define CONFIG_XILINX_SPI_IDLE_VAL     GENMASK(7, 0)
-#endif
+#define XILINX_SPI_IDLE_VAL    GENMASK(7, 0)
 
 #define XILINX_SPISR_TIMEOUT   10000 /* in milliseconds */
 
@@ -176,7 +174,7 @@ static u32 xilinx_spi_fill_txfifo(struct udevice *bus, const u8 *txp,
 
        while (txbytes && !(readl(&regs->spisr) & SPISR_TX_FULL) &&
               i < priv->fifo_depth) {
-               d = txp ? *txp++ : CONFIG_XILINX_SPI_IDLE_VAL;
+               d = txp ? *txp++ : XILINX_SPI_IDLE_VAL;
                debug("spi_xfer: tx:%x ", d);
                /* write out and wait for processing (receive data) */
                writel(d & SPIDTR_8BIT_MASK, &regs->spidtr);

diff --git a/drivers/spi/zynq_qspi.c b/drivers/spi/zynq_qspi.c
index db473da..3f39ef0 100644 (file)
--- a/drivers/spi/zynq_qspi.c
+++ b/drivers/spi/zynq_qspi.c
@@ -47,9 +47,7 @@ DECLARE_GLOBAL_DATA_PTR;
 #define ZYNQ_QSPI_CR_SS_SHIFT          10      /* Slave select shift */
 
 #define ZYNQ_QSPI_FIFO_DEPTH           63
-#ifndef CONFIG_SYS_ZYNQ_QSPI_WAIT
-#define CONFIG_SYS_ZYNQ_QSPI_WAIT      CONFIG_SYS_HZ/100       /* 10 ms */
-#endif
+#define ZYNQ_QSPI_WAIT                 (CONFIG_SYS_HZ / 100)   /* 10 ms */
 
 /* zynq qspi register set */
 struct zynq_qspi_regs {
@@ -350,7 +348,7 @@ static int zynq_qspi_irq_poll(struct zynq_qspi_priv *priv)
        do {
                status = readl(&regs->isr);
        } while ((status == 0) &&
-               (get_timer(timeout) < CONFIG_SYS_ZYNQ_QSPI_WAIT));
+               (get_timer(timeout) < ZYNQ_QSPI_WAIT));
 
        if (status == 0) {
                printf("zynq_qspi_irq_poll: Timeout!\n");

diff --git a/drivers/spi/zynq_spi.c b/drivers/spi/zynq_spi.c
index 3e66b34..78ffd3e 100644 (file)
--- a/drivers/spi/zynq_spi.c
+++ b/drivers/spi/zynq_spi.c
@@ -36,9 +36,7 @@ DECLARE_GLOBAL_DATA_PTR;
 #define ZYNQ_SPI_CR_SS_SHIFT           10      /* Slave select shift */
 
 #define ZYNQ_SPI_FIFO_DEPTH            128
-#ifndef CONFIG_SYS_ZYNQ_SPI_WAIT
-#define CONFIG_SYS_ZYNQ_SPI_WAIT       (CONFIG_SYS_HZ/100)     /* 10 ms */
-#endif
+#define ZYNQ_SPI_WAIT                  (CONFIG_SYS_HZ / 100)   /* 10 ms */
 
 /* zynq spi register set */
 struct zynq_spi_regs {
@@ -251,7 +249,7 @@ static int zynq_spi_xfer(struct udevice *dev, unsigned int bitlen,
                ts = get_timer(0);
                status = readl(&regs->isr);
                while (!(status & ZYNQ_SPI_IXR_TXOW_MASK)) {
-                       if (get_timer(ts) > CONFIG_SYS_ZYNQ_SPI_WAIT) {
+                       if (get_timer(ts) > ZYNQ_SPI_WAIT) {
                                printf("spi_xfer: Timeout! TX FIFO not full\n");
                                return -1;
                        }

diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 916768f..b023806 100644 (file)
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -3984,8 +3984,6 @@ CONFIG_SYS_XHCI_USB1_ADDR
 CONFIG_SYS_XHCI_USB2_ADDR
 CONFIG_SYS_XHCI_USB3_ADDR
 CONFIG_SYS_XIMG_LEN
-CONFIG_SYS_ZYNQ_QSPI_WAIT
-CONFIG_SYS_ZYNQ_SPI_WAIT
 CONFIG_SYS_i2C_FSL
 CONFIG_TAM3517_SETTINGS
 CONFIG_TCA642X
@@ -4211,7 +4209,6 @@ CONFIG_X86_MRC_ADDR
 CONFIG_X86_REFCODE_ADDR
 CONFIG_X86_REFCODE_RUN_ADDR
 CONFIG_XGI_XG22_BASE
-CONFIG_XILINX_SPI_IDLE_VAL
 CONFIG_XSENGINE
 CONFIG_XTFPGA
 CONFIG_YAFFSFS_PROVIDE_VALUES