net: toshiba: ps3_genic_net: use new api ethtool_{get|set}_link_ksettings

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

As I don't have the hardware, I'd be very pleased if
someone may test this patch.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Tested-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.c b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
index 7201331..fa6a065 100644 (file)
--- a/drivers/net/ethernet/toshiba/ps3_gelic_net.c
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
@@ -1206,61 +1206,68 @@ void gelic_net_get_drvinfo(struct net_device *netdev,
        strlcpy(info->version, DRV_VERSION, sizeof(info->version));
 }
 
-static int gelic_ether_get_settings(struct net_device *netdev,
-                                   struct ethtool_cmd *cmd)
+static int gelic_ether_get_link_ksettings(struct net_device *netdev,
+                                         struct ethtool_link_ksettings *cmd)
 {
        struct gelic_card *card = netdev_card(netdev);
+       u32 supported, advertising;
 
        gelic_card_get_ether_port_status(card, 0);
 
        if (card->ether_port_status & GELIC_LV1_ETHER_FULL_DUPLEX)
-               cmd->duplex = DUPLEX_FULL;
+               cmd->base.duplex = DUPLEX_FULL;
        else
-               cmd->duplex = DUPLEX_HALF;
+               cmd->base.duplex = DUPLEX_HALF;
 
        switch (card->ether_port_status & GELIC_LV1_ETHER_SPEED_MASK) {
        case GELIC_LV1_ETHER_SPEED_10:
-               ethtool_cmd_speed_set(cmd, SPEED_10);
+               cmd->base.speed = SPEED_10;
                break;
        case GELIC_LV1_ETHER_SPEED_100:
-               ethtool_cmd_speed_set(cmd, SPEED_100);
+               cmd->base.speed = SPEED_100;
                break;
        case GELIC_LV1_ETHER_SPEED_1000:
-               ethtool_cmd_speed_set(cmd, SPEED_1000);
+               cmd->base.speed = SPEED_1000;
                break;
        default:
                pr_info("%s: speed unknown\n", __func__);
-               ethtool_cmd_speed_set(cmd, SPEED_10);
+               cmd->base.speed = SPEED_10;
                break;
        }
 
-       cmd->supported = SUPPORTED_TP | SUPPORTED_Autoneg |
+       supported = SUPPORTED_TP | SUPPORTED_Autoneg |
                        SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
                        SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
                        SUPPORTED_1000baseT_Full;
-       cmd->advertising = cmd->supported;
+       advertising = supported;
        if (card->link_mode & GELIC_LV1_ETHER_AUTO_NEG) {
-               cmd->autoneg = AUTONEG_ENABLE;
+               cmd->base.autoneg = AUTONEG_ENABLE;
        } else {
-               cmd->autoneg = AUTONEG_DISABLE;
-               cmd->advertising &= ~ADVERTISED_Autoneg;
+               cmd->base.autoneg = AUTONEG_DISABLE;
+               advertising &= ~ADVERTISED_Autoneg;
        }
-       cmd->port = PORT_TP;
+       cmd->base.port = PORT_TP;
+
+       ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
+                                               supported);
+       ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
+                                               advertising);
 
        return 0;
 }
 
-static int gelic_ether_set_settings(struct net_device *netdev,
-                                   struct ethtool_cmd *cmd)
+static int
+gelic_ether_set_link_ksettings(struct net_device *netdev,
+                              const struct ethtool_link_ksettings *cmd)
 {
        struct gelic_card *card = netdev_card(netdev);
        u64 mode;
        int ret;
 
-       if (cmd->autoneg == AUTONEG_ENABLE) {
+       if (cmd->base.autoneg == AUTONEG_ENABLE) {
                mode = GELIC_LV1_ETHER_AUTO_NEG;
        } else {
-               switch (cmd->speed) {
+               switch (cmd->base.speed) {
                case SPEED_10:
                        mode = GELIC_LV1_ETHER_SPEED_10;
                        break;
@@ -1273,9 +1280,9 @@ static int gelic_ether_set_settings(struct net_device *netdev,
                default:
                        return -EINVAL;
                }
-               if (cmd->duplex == DUPLEX_FULL)
+               if (cmd->base.duplex == DUPLEX_FULL) {
                        mode |= GELIC_LV1_ETHER_FULL_DUPLEX;
-               else if (cmd->speed == SPEED_1000) {
+               } else if (cmd->base.speed == SPEED_1000) {
                        pr_info("1000 half duplex is not supported.\n");
                        return -EINVAL;
                }
@@ -1370,11 +1377,11 @@ done:
 
 static const struct ethtool_ops gelic_ether_ethtool_ops = {
        .get_drvinfo    = gelic_net_get_drvinfo,
-       .get_settings   = gelic_ether_get_settings,
-       .set_settings   = gelic_ether_set_settings,
        .get_link       = ethtool_op_get_link,
        .get_wol        = gelic_net_get_wol,
        .set_wol        = gelic_net_set_wol,
+       .get_link_ksettings = gelic_ether_get_link_ksettings,
+       .set_link_ksettings = gelic_ether_set_link_ksettings,
 };
 
 /**