struct regulator_desc desc;
struct gpio_desc *enable_gpio;
struct regmap *regmap;
- bool vsel_active_low;
bool enable_state;
};
static int rt6160_set_suspend_voltage(struct regulator_dev *rdev, int uV)
{
- struct rt6160_priv *priv = rdev_get_drvdata(rdev);
struct regmap *regmap = rdev_get_regmap(rdev);
- unsigned int reg = RT6160_REG_VSELH;
int vsel;
vsel = regulator_map_voltage_linear(rdev, uV, uV);
if (vsel < 0)
return vsel;
- if (priv->vsel_active_low)
- reg = RT6160_REG_VSELL;
-
- return regmap_update_bits(regmap, reg, RT6160_VSEL_MASK, vsel);
+ return regmap_update_bits(regmap, rdev->desc->vsel_reg,
+ RT6160_VSEL_MASK, vsel);
}
static int rt6160_get_error_flags(struct regulator_dev *rdev, unsigned int *flags)
struct rt6160_priv *priv;
struct regulator_config regulator_cfg = {};
struct regulator_dev *rdev;
+ bool vsel_active_low;
unsigned int devid;
int ret;
if (!priv)
return -ENOMEM;
- priv->vsel_active_low = device_property_present(&i2c->dev, "richtek,vsel-active-low");
+ vsel_active_low =
+ device_property_present(&i2c->dev, "richtek,vsel-active-low");
priv->enable_gpio = devm_gpiod_get_optional(&i2c->dev, "enable", GPIOD_OUT_HIGH);
if (IS_ERR(priv->enable_gpio)) {
priv->desc.owner = THIS_MODULE;
priv->desc.min_uV = RT6160_VOUT_MINUV;
priv->desc.uV_step = RT6160_VOUT_STPUV;
- priv->desc.vsel_reg = RT6160_REG_VSELH;
+ if (vsel_active_low)
+ priv->desc.vsel_reg = RT6160_REG_VSELL;
+ else
+ priv->desc.vsel_reg = RT6160_REG_VSELH;
priv->desc.vsel_mask = RT6160_VSEL_MASK;
priv->desc.n_voltages = RT6160_N_VOUTS;
priv->desc.ramp_reg = RT6160_REG_CNTL;
priv->desc.n_ramp_values = ARRAY_SIZE(rt6160_ramp_tables);
priv->desc.of_map_mode = rt6160_of_map_mode;
priv->desc.ops = &rt6160_regulator_ops;
- if (priv->vsel_active_low)
- priv->desc.vsel_reg = RT6160_REG_VSELL;
regulator_cfg.dev = &i2c->dev;
regulator_cfg.of_node = i2c->dev.of_node;