USB: EHCI: remove CNS3xxx EHCI platform driver
authorFlorian Fainelli <florian@openwrt.org>
Mon, 8 Oct 2012 13:11:25 +0000 (15:11 +0200)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Mon, 22 Oct 2012 18:23:58 +0000 (11:23 -0700)
The users have been converted to use the ehci platform driver instead, thus
making the ehci-cns3xxx driver obsolete, so remove it.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/usb/host/Kconfig
drivers/usb/host/ehci-cns3xxx.c [deleted file]
drivers/usb/host/ehci-hcd.c

index e6b64f6..d21c007 100644 (file)
@@ -215,9 +215,13 @@ config USB_W90X900_EHCI
                Enables support for the W90X900 USB controller
 
 config USB_CNS3XXX_EHCI
-       bool "Cavium CNS3XXX EHCI Module"
+       bool "Cavium CNS3XXX EHCI Module (DEPRECATED)"
        depends on USB_EHCI_HCD && ARCH_CNS3XXX
+       select USB_EHCI_HCD_PLATFORM
        ---help---
+         This option is deprecated now and the driver was removed, use
+         USB_EHCI_HCD_PLATFORM instead.
+
          Enable support for the CNS3XXX SOC's on-chip EHCI controller.
          It is needed for high-speed (480Mbit/sec) USB 2.0 device
          support.
diff --git a/drivers/usb/host/ehci-cns3xxx.c b/drivers/usb/host/ehci-cns3xxx.c
deleted file mode 100644 (file)
index d91708d..0000000
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/atomic.h>
-#include <mach/cns3xxx.h>
-#include <mach/pm.h>
-
-static int cns3xxx_ehci_init(struct usb_hcd *hcd)
-{
-       struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-       int retval;
-
-       /*
-        * EHCI and OHCI share the same clock and power,
-        * resetting twice would cause the 1st controller been reset.
-        * Therefore only do power up  at the first up device, and
-        * power down at the last down device.
-        *
-        * Set USB AHB INCR length to 16
-        */
-       if (atomic_inc_return(&usb_pwr_ref) == 1) {
-               cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
-               cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
-               cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST);
-               __raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)),
-                       MISC_CHIP_CONFIG_REG);
-       }
-
-       ehci->caps = hcd->regs;
-
-       hcd->has_tt = 0;
-
-       retval = ehci_setup(hcd);
-       if (retval)
-               return retval;
-
-       ehci_port_power(ehci, 0);
-
-       return retval;
-}
-
-static const struct hc_driver cns3xxx_ehci_hc_driver = {
-       .description            = hcd_name,
-       .product_desc           = "CNS3XXX EHCI Host Controller",
-       .hcd_priv_size          = sizeof(struct ehci_hcd),
-       .irq                    = ehci_irq,
-       .flags                  = HCD_MEMORY | HCD_USB2,
-       .reset                  = cns3xxx_ehci_init,
-       .start                  = ehci_run,
-       .stop                   = ehci_stop,
-       .shutdown               = ehci_shutdown,
-       .urb_enqueue            = ehci_urb_enqueue,
-       .urb_dequeue            = ehci_urb_dequeue,
-       .endpoint_disable       = ehci_endpoint_disable,
-       .endpoint_reset         = ehci_endpoint_reset,
-       .get_frame_number       = ehci_get_frame,
-       .hub_status_data        = ehci_hub_status_data,
-       .hub_control            = ehci_hub_control,
-#ifdef CONFIG_PM
-       .bus_suspend            = ehci_bus_suspend,
-       .bus_resume             = ehci_bus_resume,
-#endif
-       .relinquish_port        = ehci_relinquish_port,
-       .port_handed_over       = ehci_port_handed_over,
-
-       .clear_tt_buffer_complete       = ehci_clear_tt_buffer_complete,
-};
-
-static int cns3xxx_ehci_probe(struct platform_device *pdev)
-{
-       struct device *dev = &pdev->dev;
-       struct usb_hcd *hcd;
-       const struct hc_driver *driver = &cns3xxx_ehci_hc_driver;
-       struct resource *res;
-       int irq;
-       int retval;
-
-       if (usb_disabled())
-               return -ENODEV;
-
-       res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-       if (!res) {
-               dev_err(dev, "Found HC with no IRQ.\n");
-               return -ENODEV;
-       }
-       irq = res->start;
-
-       hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
-       if (!hcd)
-               return -ENOMEM;
-
-       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-       if (!res) {
-               dev_err(dev, "Found HC with no register addr.\n");
-               retval = -ENODEV;
-               goto err1;
-       }
-
-       hcd->rsrc_start = res->start;
-       hcd->rsrc_len = resource_size(res);
-
-       hcd->regs = devm_request_and_ioremap(&pdev->dev, res);
-       if (hcd->regs == NULL) {
-               dev_dbg(dev, "error mapping memory\n");
-               retval = -EFAULT;
-               goto err1;
-       }
-
-       retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
-       if (retval == 0)
-               return retval;
-
-err1:
-       usb_put_hcd(hcd);
-
-       return retval;
-}
-
-static int cns3xxx_ehci_remove(struct platform_device *pdev)
-{
-       struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
-       usb_remove_hcd(hcd);
-
-       /*
-        * EHCI and OHCI share the same clock and power,
-        * resetting twice would cause the 1st controller been reset.
-        * Therefore only do power up  at the first up device, and
-        * power down at the last down device.
-        */
-       if (atomic_dec_return(&usb_pwr_ref) == 0)
-               cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
-
-       usb_put_hcd(hcd);
-
-       platform_set_drvdata(pdev, NULL);
-
-       return 0;
-}
-
-MODULE_ALIAS("platform:cns3xxx-ehci");
-
-static struct platform_driver cns3xxx_ehci_driver = {
-       .probe = cns3xxx_ehci_probe,
-       .remove = cns3xxx_ehci_remove,
-       .driver = {
-               .name = "cns3xxx-ehci",
-       },
-};
index add37bc..28fb5dd 100644 (file)
@@ -1259,11 +1259,6 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER                ehci_octeon_driver
 #endif
 
-#ifdef CONFIG_USB_CNS3XXX_EHCI
-#include "ehci-cns3xxx.c"
-#define PLATFORM_DRIVER                cns3xxx_ehci_driver
-#endif
-
 #ifdef CONFIG_ARCH_VT8500
 #include "ehci-vt8500.c"
 #define        PLATFORM_DRIVER         vt8500_ehci_driver