/*
*/
-/*
- * DBDMA control/status registers. All little-endian.
- */
-
-#define DBDMA_CONTROL 0x00
-#define DBDMA_STATUS 0x01
-#define DBDMA_CMDPTR_HI 0x02
-#define DBDMA_CMDPTR_LO 0x03
-#define DBDMA_INTR_SEL 0x04
-#define DBDMA_BRANCH_SEL 0x05
-#define DBDMA_WAIT_SEL 0x06
-#define DBDMA_XFER_MODE 0x07
-#define DBDMA_DATA2PTR_HI 0x08
-#define DBDMA_DATA2PTR_LO 0x09
-#define DBDMA_RES1 0x0A
-#define DBDMA_ADDRESS_HI 0x0B
-#define DBDMA_BRANCH_ADDR_HI 0x0C
-#define DBDMA_RES2 0x0D
-#define DBDMA_RES3 0x0E
-#define DBDMA_RES4 0x0F
-
-#define DBDMA_REGS 16
-#define DBDMA_SIZE (DBDMA_REGS * sizeof(uint32_t))
-
-#define DBDMA_CHANNEL_SHIFT 7
-#define DBDMA_CHANNEL_SIZE (1 << DBDMA_CHANNEL_SHIFT)
-
-#define DBDMA_CHANNELS (0x1000 >> DBDMA_CHANNEL_SHIFT)
-
-/* Bits in control and status registers */
-
-#define RUN 0x8000
-#define PAUSE 0x4000
-#define FLUSH 0x2000
-#define WAKE 0x1000
-#define DEAD 0x0800
-#define ACTIVE 0x0400
-#define BT 0x0100
-#define DEVSTAT 0x00ff
-
-/*
- * DBDMA command structure. These fields are all little-endian!
- */
-
-typedef struct dbdma_cmd {
- uint16_t req_count; /* requested byte transfer count */
- uint16_t command; /* command word (has bit-fields) */
- uint32_t phy_addr; /* physical data address */
- uint32_t cmd_dep; /* command-dependent field */
- uint16_t res_count; /* residual count after completion */
- uint16_t xfer_status; /* transfer status */
-} dbdma_cmd;
-
-/* DBDMA command values in command field */
-
-#define COMMAND_MASK 0xf000
-#define OUTPUT_MORE 0x0000 /* transfer memory data to stream */
-#define OUTPUT_LAST 0x1000 /* ditto followed by end marker */
-#define INPUT_MORE 0x2000 /* transfer stream data to memory */
-#define INPUT_LAST 0x3000 /* ditto, expect end marker */
-#define STORE_WORD 0x4000 /* write word (4 bytes) to device reg */
-#define LOAD_WORD 0x5000 /* read word (4 bytes) from device reg */
-#define DBDMA_NOP 0x6000 /* do nothing */
-#define DBDMA_STOP 0x7000 /* suspend processing */
-
-/* Key values in command field */
-
-#define KEY_MASK 0x0700
-#define KEY_STREAM0 0x0000 /* usual data stream */
-#define KEY_STREAM1 0x0100 /* control/status stream */
-#define KEY_STREAM2 0x0200 /* device-dependent stream */
-#define KEY_STREAM3 0x0300 /* device-dependent stream */
-#define KEY_STREAM4 0x0400 /* reserved */
-#define KEY_REGS 0x0500 /* device register space */
-#define KEY_SYSTEM 0x0600 /* system memory-mapped space */
-#define KEY_DEVICE 0x0700 /* device memory-mapped space */
-
-/* Interrupt control values in command field */
-
-#define INTR_MASK 0x0030
-#define INTR_NEVER 0x0000 /* don't interrupt */
-#define INTR_IFSET 0x0010 /* intr if condition bit is 1 */
-#define INTR_IFCLR 0x0020 /* intr if condition bit is 0 */
-#define INTR_ALWAYS 0x0030 /* always interrupt */
-
-/* Branch control values in command field */
-
-#define BR_MASK 0x000c
-#define BR_NEVER 0x0000 /* don't branch */
-#define BR_IFSET 0x0004 /* branch if condition bit is 1 */
-#define BR_IFCLR 0x0008 /* branch if condition bit is 0 */
-#define BR_ALWAYS 0x000c /* always branch */
-
-/* Wait control values in command field */
-
-#define WAIT_MASK 0x0003
-#define WAIT_NEVER 0x0000 /* don't wait */
-#define WAIT_IFSET 0x0001 /* wait if condition bit is 1 */
-#define WAIT_IFCLR 0x0002 /* wait if condition bit is 0 */
-#define WAIT_ALWAYS 0x0003 /* always wait */
-
-typedef struct DBDMA_channel {
- int channel;
- uint32_t regs[DBDMA_REGS];
- qemu_irq irq;
- DBDMA_io io;
- DBDMA_rw rw;
- DBDMA_flush flush;
- dbdma_cmd current;
- int processing;
-} DBDMA_channel;
-
-typedef struct {
- MemoryRegion mem;
- DBDMA_channel channels[DBDMA_CHANNELS];
-} DBDMAState;
-
#ifdef DEBUG_DBDMA
static void dump_dbdma_cmd(dbdma_cmd *cmd)
{
DBDMA_end dma_end;
};
+/*
+ * DBDMA control/status registers. All little-endian.
+ */
+
+#define DBDMA_CONTROL 0x00
+#define DBDMA_STATUS 0x01
+#define DBDMA_CMDPTR_HI 0x02
+#define DBDMA_CMDPTR_LO 0x03
+#define DBDMA_INTR_SEL 0x04
+#define DBDMA_BRANCH_SEL 0x05
+#define DBDMA_WAIT_SEL 0x06
+#define DBDMA_XFER_MODE 0x07
+#define DBDMA_DATA2PTR_HI 0x08
+#define DBDMA_DATA2PTR_LO 0x09
+#define DBDMA_RES1 0x0A
+#define DBDMA_ADDRESS_HI 0x0B
+#define DBDMA_BRANCH_ADDR_HI 0x0C
+#define DBDMA_RES2 0x0D
+#define DBDMA_RES3 0x0E
+#define DBDMA_RES4 0x0F
+
+#define DBDMA_REGS 16
+#define DBDMA_SIZE (DBDMA_REGS * sizeof(uint32_t))
+
+#define DBDMA_CHANNEL_SHIFT 7
+#define DBDMA_CHANNEL_SIZE (1 << DBDMA_CHANNEL_SHIFT)
+
+#define DBDMA_CHANNELS (0x1000 >> DBDMA_CHANNEL_SHIFT)
+
+/* Bits in control and status registers */
+
+#define RUN 0x8000
+#define PAUSE 0x4000
+#define FLUSH 0x2000
+#define WAKE 0x1000
+#define DEAD 0x0800
+#define ACTIVE 0x0400
+#define BT 0x0100
+#define DEVSTAT 0x00ff
+
+/*
+ * DBDMA command structure. These fields are all little-endian!
+ */
+
+typedef struct dbdma_cmd {
+ uint16_t req_count; /* requested byte transfer count */
+ uint16_t command; /* command word (has bit-fields) */
+ uint32_t phy_addr; /* physical data address */
+ uint32_t cmd_dep; /* command-dependent field */
+ uint16_t res_count; /* residual count after completion */
+ uint16_t xfer_status; /* transfer status */
+} dbdma_cmd;
+
+/* DBDMA command values in command field */
+
+#define COMMAND_MASK 0xf000
+#define OUTPUT_MORE 0x0000 /* transfer memory data to stream */
+#define OUTPUT_LAST 0x1000 /* ditto followed by end marker */
+#define INPUT_MORE 0x2000 /* transfer stream data to memory */
+#define INPUT_LAST 0x3000 /* ditto, expect end marker */
+#define STORE_WORD 0x4000 /* write word (4 bytes) to device reg */
+#define LOAD_WORD 0x5000 /* read word (4 bytes) from device reg */
+#define DBDMA_NOP 0x6000 /* do nothing */
+#define DBDMA_STOP 0x7000 /* suspend processing */
+
+/* Key values in command field */
+
+#define KEY_MASK 0x0700
+#define KEY_STREAM0 0x0000 /* usual data stream */
+#define KEY_STREAM1 0x0100 /* control/status stream */
+#define KEY_STREAM2 0x0200 /* device-dependent stream */
+#define KEY_STREAM3 0x0300 /* device-dependent stream */
+#define KEY_STREAM4 0x0400 /* reserved */
+#define KEY_REGS 0x0500 /* device register space */
+#define KEY_SYSTEM 0x0600 /* system memory-mapped space */
+#define KEY_DEVICE 0x0700 /* device memory-mapped space */
+
+/* Interrupt control values in command field */
+
+#define INTR_MASK 0x0030
+#define INTR_NEVER 0x0000 /* don't interrupt */
+#define INTR_IFSET 0x0010 /* intr if condition bit is 1 */
+#define INTR_IFCLR 0x0020 /* intr if condition bit is 0 */
+#define INTR_ALWAYS 0x0030 /* always interrupt */
+
+/* Branch control values in command field */
+
+#define BR_MASK 0x000c
+#define BR_NEVER 0x0000 /* don't branch */
+#define BR_IFSET 0x0004 /* branch if condition bit is 1 */
+#define BR_IFCLR 0x0008 /* branch if condition bit is 0 */
+#define BR_ALWAYS 0x000c /* always branch */
+
+/* Wait control values in command field */
+
+#define WAIT_MASK 0x0003
+#define WAIT_NEVER 0x0000 /* don't wait */
+#define WAIT_IFSET 0x0001 /* wait if condition bit is 1 */
+#define WAIT_IFCLR 0x0002 /* wait if condition bit is 0 */
+#define WAIT_ALWAYS 0x0003 /* always wait */
+
+typedef struct DBDMA_channel {
+ int channel;
+ uint32_t regs[DBDMA_REGS];
+ qemu_irq irq;
+ DBDMA_io io;
+ DBDMA_rw rw;
+ DBDMA_flush flush;
+ dbdma_cmd current;
+ int processing;
+} DBDMA_channel;
+
+typedef struct {
+ MemoryRegion mem;
+ DBDMA_channel channels[DBDMA_CHANNELS];
+} DBDMAState;
+
+/* Externally callable functions */
void DBDMA_register_channel(void *dbdma, int nchan, qemu_irq irq,
DBDMA_rw rw, DBDMA_flush flush,