net: dsa: felix: actually disable flooding towards NPI port

The two blamed commits were written/tested individually but not
together.

When put together, commit 90897569beb1 ("net: dsa: felix: start off with
flooding disabled on the CPU port"), which deletes a reinitialization of
PGID_UC/PGID_MC/PGID_BC, is no longer sufficient to ensure that these
port masks don't contain the CPU port module.

This is because commit b903a6bd2e19 ("net: dsa: felix: migrate flood
settings from NPI to tag_8021q CPU port") overwrites the hardware
default settings towards the CPU port module with the settings that used
to be present on the NPI port treated as a regular port. There, flooding
is enabled, so flooding would get enabled on the CPU port module too.

Adding conditional logic somewhere within felix_setup_tag_npi() to
configure either the default no-flood policy or the flood policy
inherited from the tag_8021q CPU port from a previous call to
dsa_port_manage_cpu_flood() is getting complicated. So just let the
migration logic do its thing during initial setup (which will
temporarily turn on flooding), then turn flooding off for the NPI port
after felix_set_tag_protocol() finishes. Here we are in felix_setup(),
so the DSA slave interfaces are not yet created, and this doesn't affect
traffic in any way.

Fixes: 90897569beb1 ("net: dsa: felix: start off with flooding disabled on the CPU port")
Fixes: b903a6bd2e19 ("net: dsa: felix: migrate flood settings from NPI to tag_8021q CPU port")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c
index 2c58031..e475186 100644 (file)
--- a/drivers/net/dsa/ocelot/felix.c
+++ b/drivers/net/dsa/ocelot/felix.c
@@ -1343,6 +1343,7 @@ static int felix_setup(struct dsa_switch *ds)
 {
        struct ocelot *ocelot = ds->priv;
        struct felix *felix = ocelot_to_felix(ocelot);
+       unsigned long cpu_flood;
        struct dsa_port *dp;
        int err;
 
@@ -1381,6 +1382,14 @@ static int felix_setup(struct dsa_switch *ds)
                 * there's no real point in checking for errors.
                 */
                felix_set_tag_protocol(ds, dp->index, felix->tag_proto);
+
+               /* Start off with flooding disabled towards the NPI port
+                * (actually CPU port module).
+                */
+               cpu_flood = ANA_PGID_PGID_PGID(BIT(ocelot->num_phys_ports));
+               ocelot_rmw_rix(ocelot, 0, cpu_flood, ANA_PGID_PGID, PGID_UC);
+               ocelot_rmw_rix(ocelot, 0, cpu_flood, ANA_PGID_PGID, PGID_MC);
+
                break;
        }