long ldBm;
pDevice->wstats.status = pDevice->eOPMode;
- if(pDevice->scStatistic.LinkQuality > 100)
+ if (pDevice->scStatistic.LinkQuality > 100)
pDevice->scStatistic.LinkQuality = 100;
pDevice->wstats.qual.qual =(BYTE)pDevice->scStatistic.LinkQuality;
RFvRSSITodBm(pDevice, (BYTE)(pDevice->uCurrRSSI), &ldBm);
return -EAGAIN;
}
- if(pDevice->byReAssocCount > 0) { //reject scan when re-associating!
+ if (pDevice->byReAssocCount > 0) { //reject scan when re-associating!
//send scan event to wpa_Supplicant
union iwreq_data wrqu;
PRINT_K("wireless_send_event--->SIOCGIWSCAN(scan done)\n");
BSSvClearBSSList((void *)pDevice, pDevice->bLinkPass);
//mike add: active scan OR passive scan OR desire_ssid scan
- if(wrq->length == sizeof(struct iw_scan_req)) {
+ if (wrq->length == sizeof(struct iw_scan_req)) {
if (wrq->flags & IW_SCAN_THIS_ESSID) { //desire_ssid scan
memset(abyScanSSID, 0, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1);
pItemSSID = (PWLAN_IE_SSID)abyScanSSID;
pItemSSID->byElementID = WLAN_EID_SSID;
memcpy(pItemSSID->abySSID, req->essid, (int)req->essid_len);
if (pItemSSID->abySSID[req->essid_len - 1] == '\0') {
- if(req->essid_len>0)
+ if (req->essid_len>0)
pItemSSID->len = req->essid_len - 1;
}
else
return 0;
}
- else if(req->scan_type == IW_SCAN_TYPE_PASSIVE) { //passive scan
+ else if (req->scan_type == IW_SCAN_TYPE_PASSIVE) { //passive scan
pMgmt->eScanType = WMAC_SCAN_PASSIVE;
}
}
current_ev = iwe_stream_add_event(info,current_ev,end_buf, &iwe, IW_EV_FREQ_LEN);
{
int f = (int)pBSS->uChannel - 1;
- if(f < 0)f = 0;
+ if (f < 0)f = 0;
iwe.u.freq.m = frequency_list[f] * 100000;
iwe.u.freq.e = 1;
}
iwe.u.qual.level = ldBm;
iwe.u.qual.noise = 0;
- if(-ldBm<50){
+ if (-ldBm<50){
iwe.u.qual.qual = 100;
- }else if(-ldBm > 90) {
+ }else if (-ldBm > 90) {
iwe.u.qual.qual = 0;
}else {
iwe.u.qual.qual=(40-(-ldBm-50))*100/40;
current_val = iwe_stream_add_value(info,current_ev, current_val, end_buf, &iwe, IW_EV_PARAM_LEN);
}
- if((current_val - current_ev) > IW_EV_LCP_LEN)
+ if ((current_val - current_ev) > IW_EV_LCP_LEN)
current_ev = current_val;
memset(&iwe, 0, sizeof(iwe));
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWFREQ \n");
// If setting by frequency, convert to a channel
- if((wrq->e == 1) &&
+ if ((wrq->e == 1) &&
(wrq->m >= (int)2.412e8) &&
(wrq->m <= (int)2.487e8)) {
int f = wrq->m / 100000;
int c = 0;
- while((c < 14) && (f != frequency_list[c]))
+ while ((c < 14) && (f != frequency_list[c]))
c++;
wrq->e = 0;
wrq->m = c + 1;
}
// Setting by channel number
- if((wrq->m > 14) || (wrq->e > 0))
+ if ((wrq->m > 14) || (wrq->e > 0))
rc = -EOPNOTSUPP;
else {
int channel = wrq->m;
- if((channel < 1) || (channel > 14)) {
+ if ((channel < 1) || (channel > 14)) {
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%s: New channel value of %d is invalid!\n", dev->name, wrq->m);
rc = -EINVAL;
} else {
#else
{
int f = (int)pMgmt->uCurrChannel - 1;
- if(f < 0)
+ if (f < 0)
f = 0;
wrq->m = frequency_list[f] * 100000;
wrq->e = 1;
return rc;
}
- switch(*wmode) {
+ switch (*wmode) {
case IW_MODE_ADHOC:
if (pMgmt->eConfigMode != WMAC_CONFIG_IBSS_STA) {
for (i = 0 ; i < 13 ; i++) {
range->bitrate[i] = abySupportedRates[i] * 500000;
- if(range->bitrate[i] == 0)
+ if (range->bitrate[i] == 0)
break;
}
range->num_bitrates = i;
// Set an indication of the max TCP throughput
// in bit/s that we can expect using this interface.
// May be use for QoS stuff... Jean II
- if(i > 2)
+ if (i > 2)
range->throughput = 5 * 1000 * 1000;
else
range->throughput = 1.5 * 1000 * 1000;
uSameBssidNum++;
}
}
- if(uSameBssidNum >= 2) { //hit: desired AP is in hidden ssid mode!!!
+ if (uSameBssidNum >= 2) { //hit: desired AP is in hidden ssid mode!!!
PRINT_K("SIOCSIWAP:ignore for desired AP in hidden mode\n");
return rc;
}
pDevice->fWPA_Authened = FALSE;
// Check if we asked for `any'
- if(wrq->flags == 0) {
+ if (wrq->flags == 0) {
// Just send an empty SSID list
memset(pMgmt->abyDesireSSID, 0, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1);
memset(pMgmt->abyDesireBSSID, 0xFF,6);
memcpy(pItemSSID->abySSID, extra, wrq->length);
if (pItemSSID->abySSID[wrq->length - 1] == '\0') {
- if(wrq->length>0)
+ if (wrq->length>0)
pItemSSID->len = wrq->length - 1;
}
else
PRINT_K("set essid to %s \n",pItemSSID->abySSID);
//mike:need clear desiredBSSID
- if(pItemSSID->len==0) {
+ if (pItemSSID->len==0) {
memset(pMgmt->abyDesireBSSID, 0xFF,6);
return 0;
}
#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
//Wext wil order another command of siwap to link with desired AP,
//so here need not associate??
- if(pDevice->bWPASuppWextEnabled == TRUE) {
+ if (pDevice->bWPASuppWextEnabled == TRUE) {
/*******search if in hidden ssid mode ****/
PKnownBSS pCurr = NULL;
BYTE abyTmpDesireSSID[WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1];
uSameBssidNum++;
}
}
- if(uSameBssidNum >= 2) { //hit: desired AP is in hidden ssid mode!!!
+ if (uSameBssidNum >= 2) { //hit: desired AP is in hidden ssid mode!!!
PRINT_K("SIOCSIWESSID:hidden ssid directly associate.......\n");
vResetCommandTimer((void *)pDevice);
pMgmt->eScanType = WMAC_SCAN_PASSIVE; //this scan type,you'll submit scan result!
// First : get a valid bit rate value
// Which type of value
- if((wrq->value < 13) &&
+ if ((wrq->value < 13) &&
(wrq->value >= 0)) {
// Setting by rate index
// Find value in the magic rate table
// Check if rate is valid
for (i = 0 ; i < 13 ; i++) {
- if(normvalue == abySupportedRates[i]) {
+ if (normvalue == abySupportedRates[i]) {
brate = i;
break;
}
}
}
// -1 designed the max rate (mostly auto mode)
- if(wrq->value == -1) {
+ if (wrq->value == -1) {
// Get the highest available rate
for (i = 0 ; i < 13 ; i++) {
- if(abySupportedRates[i] == 0)
+ if (abySupportedRates[i] == 0)
break;
}
- if(i != 0)
+ if (i != 0)
brate = i - 1;
}
// Check that it is valid
// brate is index of abySupportedRates[]
- if(brate > 13 ) {
+ if (brate > 13 ) {
rc = -EINVAL;
return rc;
}
// Now, check if we want a fixed or auto value
- if(wrq->fixed != 0) {
+ if (wrq->fixed != 0) {
// Fixed mode
// One rate, fixed
pDevice->bFixRate = TRUE;
if (wrq->disabled)
fthr = 2312;
- if((fthr < 256) || (fthr > 2312)) {
+ if ((fthr < 256) || (fthr > 2312)) {
rc = -EINVAL;
}else {
fthr &= ~0x1; // Get an even value
}
if (wrq->flags & IW_RETRY_LIMIT) {
- if(wrq->flags & IW_RETRY_MAX)
+ if (wrq->flags & IW_RETRY_MAX)
pDevice->byLongRetryLimit = wrq->value;
else if (wrq->flags & IW_RETRY_MIN)
pDevice->byShortRetryLimit = wrq->value;
wrq->disabled = 0; // Can't be disabled
// Note : by default, display the min retry number
- if((wrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) {
+ if ((wrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) {
wrq->flags = IW_RETRY_LIFETIME;
wrq->value = (int)pDevice->wMaxTransmitMSDULifetime; //ms
- } else if((wrq->flags & IW_RETRY_MAX)) {
+ } else if ((wrq->flags & IW_RETRY_MAX)) {
wrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX;
wrq->value = (int)pDevice->byLongRetryLimit;
} else {
wrq->flags = IW_RETRY_LIMIT;
wrq->value = (int)pDevice->byShortRetryLimit;
- if((int)pDevice->byShortRetryLimit != (int)pDevice->byLongRetryLimit)
+ if ((int)pDevice->byShortRetryLimit != (int)pDevice->byLongRetryLimit)
wrq->flags |= IW_RETRY_MIN;
}
}
}
// Read the flags
- if(wrq->flags & IW_ENCODE_DISABLED){
+ if (wrq->flags & IW_ENCODE_DISABLED){
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Disable WEP function\n");
pMgmt->bShareKeyAlgorithm = FALSE;
spin_unlock_irq(&pDevice->lock);
}
}
- if(wrq->flags & IW_ENCODE_RESTRICTED) {
+ if (wrq->flags & IW_ENCODE_RESTRICTED) {
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Enable WEP & ShareKey System\n");
pMgmt->bShareKeyAlgorithm = TRUE;
}
- if(wrq->flags & IW_ENCODE_OPEN) {
+ if (wrq->flags & IW_ENCODE_OPEN) {
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Enable WEP & Open System\n");
pMgmt->bShareKeyAlgorithm = FALSE;
}
if (index > WLAN_WEP_NKEYS) {
return -EINVAL;
}
- if(index<1){//get default key
- if(pDevice->byKeyIndex<WLAN_WEP_NKEYS){
+ if (index<1){//get default key
+ if (pDevice->byKeyIndex<WLAN_WEP_NKEYS){
index=pDevice->byKeyIndex;
} else
index=0;
wrq->flags |= IW_ENCODE_OPEN;
wrq->length=0;
- if((index==0)&&(pDevice->eEncryptionStatus == Ndis802_11Encryption2Enabled||
+ if ((index==0)&&(pDevice->eEncryptionStatus == Ndis802_11Encryption2Enabled||
pDevice->eEncryptionStatus == Ndis802_11Encryption3Enabled)){//get wpa pairwise key
if (KeybGetKey(&(pDevice->sKey),pMgmt->abyCurrBSSID, 0xffffffff, &pKey)){
wrq->length = pKey->uKeyLength;
switch (wrq->flags & IW_AUTH_INDEX) {
case IW_AUTH_WPA_VERSION:
wpa_version = wrq->value;
- if(wrq->value == IW_AUTH_WPA_VERSION_DISABLED) {
+ if (wrq->value == IW_AUTH_WPA_VERSION_DISABLED) {
PRINT_K("iwctl_siwauth:set WPADEV to disable at 1??????\n");
}
- else if(wrq->value == IW_AUTH_WPA_VERSION_WPA) {
+ else if (wrq->value == IW_AUTH_WPA_VERSION_WPA) {
PRINT_K("iwctl_siwauth:set WPADEV to WPA1******\n");
}
else {
case IW_AUTH_CIPHER_PAIRWISE:
pairwise = wrq->value;
PRINT_K("iwctl_siwauth:set pairwise=%d\n",pairwise);
- if(pairwise == IW_AUTH_CIPHER_CCMP){
+ if (pairwise == IW_AUTH_CIPHER_CCMP){
pDevice->eEncryptionStatus = Ndis802_11Encryption3Enabled;
- }else if(pairwise == IW_AUTH_CIPHER_TKIP){
+ }else if (pairwise == IW_AUTH_CIPHER_TKIP){
pDevice->eEncryptionStatus = Ndis802_11Encryption2Enabled;
} else if (pairwise == IW_AUTH_CIPHER_WEP40 ||
pairwise == IW_AUTH_CIPHER_WEP104) {
pDevice->eEncryptionStatus = Ndis802_11Encryption1Enabled;
- }else if(pairwise == IW_AUTH_CIPHER_NONE){
+ }else if (pairwise == IW_AUTH_CIPHER_NONE){
//do nothing,einsn liu
}else pDevice->eEncryptionStatus = Ndis802_11EncryptionDisabled;
break;
case IW_AUTH_CIPHER_GROUP:
PRINT_K("iwctl_siwauth:set GROUP=%d\n",wrq->value);
- if(wpa_version == IW_AUTH_WPA_VERSION_DISABLED)
+ if (wpa_version == IW_AUTH_WPA_VERSION_DISABLED)
break;
- if(pairwise == IW_AUTH_CIPHER_NONE){
- if(wrq->value == IW_AUTH_CIPHER_CCMP){
+ if (pairwise == IW_AUTH_CIPHER_NONE){
+ if (wrq->value == IW_AUTH_CIPHER_CCMP){
pDevice->eEncryptionStatus = Ndis802_11Encryption3Enabled;
}else {
pDevice->eEncryptionStatus = Ndis802_11Encryption2Enabled;
break;
case IW_AUTH_KEY_MGMT:
PRINT_K("iwctl_siwauth(wpa_version=%d):set KEY_MGMT=%d\n",wpa_version,wrq->value);
- if(wpa_version == IW_AUTH_WPA_VERSION_WPA2){
- if(wrq->value == IW_AUTH_KEY_MGMT_PSK)
+ if (wpa_version == IW_AUTH_WPA_VERSION_WPA2){
+ if (wrq->value == IW_AUTH_KEY_MGMT_PSK)
pMgmt->eAuthenMode = WMAC_AUTH_WPA2PSK;
else pMgmt->eAuthenMode = WMAC_AUTH_WPA2;
- }else if(wpa_version == IW_AUTH_WPA_VERSION_WPA){
- if(wrq->value == 0){
+ }else if (wpa_version == IW_AUTH_WPA_VERSION_WPA){
+ if (wrq->value == 0){
pMgmt->eAuthenMode = WMAC_AUTH_WPANONE;
- }else if(wrq->value == IW_AUTH_KEY_MGMT_PSK)
+ }else if (wrq->value == IW_AUTH_KEY_MGMT_PSK)
pMgmt->eAuthenMode = WMAC_AUTH_WPAPSK;
else pMgmt->eAuthenMode = WMAC_AUTH_WPA;
}
break;
case IW_AUTH_80211_AUTH_ALG:
PRINT_K("iwctl_siwauth:set AUTH_ALG=%d\n",wrq->value);
- if(wrq->value==IW_AUTH_ALG_OPEN_SYSTEM){
+ if (wrq->value==IW_AUTH_ALG_OPEN_SYSTEM){
pMgmt->bShareKeyAlgorithm=FALSE;
- }else if(wrq->value==IW_AUTH_ALG_SHARED_KEY){
+ }else if (wrq->value==IW_AUTH_ALG_SHARED_KEY){
pMgmt->bShareKeyAlgorithm=TRUE;
}
break;
break;
case IW_AUTH_PRIVACY_INVOKED:
pDevice->bEncryptionEnable = !!wrq->value;
- if(pDevice->bEncryptionEnable == FALSE){
+ if (pDevice->bEncryptionEnable == FALSE){
wpa_version = 0;
pairwise = 0;
pDevice->eEncryptionStatus = Ndis802_11EncryptionDisabled;
PSMgmtObject pMgmt = &(pDevice->sMgmtObj);
int ret = 0;
- if(wrq->length){
+ if (wrq->length){
if ((wrq->length < 2) || (extra[1]+2 != wrq->length)) {
ret = -EINVAL;
goto out;
}
- if(wrq->length > MAX_WPA_IE_LEN){
+ if (wrq->length > MAX_WPA_IE_LEN){
ret = -ENOMEM;
goto out;
}
memset(pMgmt->abyWPAIE, 0, MAX_WPA_IE_LEN);
- if(copy_from_user(pMgmt->abyWPAIE, extra, wrq->length)){
+ if (copy_from_user(pMgmt->abyWPAIE, extra, wrq->length)){
ret = -EFAULT;
goto out;
}
int space = wrq->length;
wrq->length = 0;
- if(pMgmt->wWPAIELen > 0){
+ if (pMgmt->wWPAIELen > 0){
wrq->length = pMgmt->wWPAIELen;
- if(pMgmt->wWPAIELen <= space){
- if(copy_to_user(extra, pMgmt->abyWPAIE, pMgmt->wWPAIELen)){
+ if (pMgmt->wWPAIELen <= space){
+ if (copy_to_user(extra, pMgmt->abyWPAIE, pMgmt->wWPAIELen)){
ret = -EFAULT;
}
}else
//recover key_idx
key_idx = (wrq->flags&IW_ENCODE_INDEX) - 1;
//recover set_tx
- if(ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)
+ if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)
set_tx = 1;
//recover seq,seq_len
- if(ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID) {
+ if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID) {
seq_len=IW_ENCODE_SEQ_MAX_SIZE;
memcpy(seq, ext->rx_seq, seq_len);
}
//recover key,key_len
- if(ext->key_len) {
+ if (ext->key_len) {
key_len=ext->key_len;
memcpy(key, &ext->key[0], key_len);
}
//****set if current action is Network Manager count??
//****this method is so foolish,but there is no other way???
- if(param->u.wpa_key.alg_name == WPA_ALG_NONE) {
- if(param->u.wpa_key.key_index ==0) {
+ if (param->u.wpa_key.alg_name == WPA_ALG_NONE) {
+ if (param->u.wpa_key.key_index ==0) {
pDevice->bwextstep0 = TRUE;
}
if ((pDevice->bwextstep0 == TRUE) && (param->u.wpa_key.key_index == 1)) {
pDevice->bwextstep3 = TRUE;
}
}
- if(pDevice->bwextstep3 == TRUE) {
+ if (pDevice->bwextstep3 == TRUE) {
PRINT_K("SIOCSIWENCODEEXT:Enable WPA WEXT SUPPORT!!!!!\n");
pDevice->bwextstep0 = FALSE;
pDevice->bwextstep1 = FALSE;
struct iw_mlme *mlme = (struct iw_mlme *)extra;
int ret = 0;
- if(memcmp(pMgmt->abyCurrBSSID, mlme->addr.sa_data, ETH_ALEN)){
+ if (memcmp(pMgmt->abyCurrBSSID, mlme->addr.sa_data, ETH_ALEN)){
ret = -EINVAL;
return ret;
}
- switch(mlme->cmd){
+ switch (mlme->cmd){
case IW_MLME_DEAUTH:
case IW_MLME_DISASSOC:
- if(pDevice->bLinkPass == TRUE){
+ if (pDevice->bLinkPass == TRUE){
PRINT_K("iwctl_siwmlme--->send DISASSOCIATE\n");
bScheduleCommand((void *)pDevice,
WLAN_CMD_DISASSOCIATE,
projects / platform / kernel / linux-exynos.git / commitdiff