[Property("AUTHOR", "Pawel Szewczyk, p.szewczyk@samsung.com")]
[Precondition(1, "USB device is not connected")]
[Step(1, "Click run TC")]
- [Step(2, "Connect a USB device")]
- [Step(3, "Check if displayed device Vendor Id / Product Id matches the device you connected")]
- [Step(4, "Click PASS if device matches, FAIL if it's wrong")]
- [Step(5, "If device USB Host feature is not supported, press PASS after 'not supported' message is shown")]
+ [Step(2, "Connect a USB device (e.g., USB mouse or keyboard")]
+ [Step(3, "Use an OTG cable for micro USB port")]
+ [Step(4, "Check if displayed device Vendor Id / Product Id matches the device you connected")]
+ [Step(5, "Click PASS if device matches, FAIL if it's wrong")]
+ [Step(6, "If device USB Host feature is not supported, press PASS after 'not supported' message is shown")]
[Postcondition(1, "NA")]
public async Task Device_CB()
{
[Property("AUTHOR", "Pawel Szewczyk, p.szewczyk@samsung.com")]
[Precondition(1, "USB device is not connected")]
[Step(1, "Click run TC")]
- [Step(2, "Connect a USB device")]
- [Step(3, "Test will pass automatically if event type is correct")]
- [Step(4, "If device USB Host feature is not supported, press PASS after 'not supported' message is shown")]
+ [Step(2, "Connect a USB device (e.g., USB mouse or keyboard")]
+ [Step(3, "Use an OTG cable for micro USB port")]
+ [Step(4, "Test will pass automatically if event type is correct")]
+ [Step(5, "If device USB Host feature is not supported, press PASS after 'not supported' message is shown")]
[Postcondition(1, "NA")]
public async Task EventType_CB()
{
[Property("AUTHOR", "Pawel Szewczyk, p.szewczyk@samsung.com")]
[Precondition(1, "USB device is not connected")]
[Step(1, "Click run TC")]
- [Step(2, "Connect a USB device")]
- [Step(3, "Testcase will pass automatically if device connection is recognized.")]
- [Step(4, "If device USB Host feature is not supported, press PASS after 'not supported' message is shown")]
+ [Step(2, "Connect a USB device (e.g., USB mouse or keyboard")]
+ [Step(3, "Use an OTG cable for micro USB port")]
+ [Step(4, "Testcase will pass automatically if device connection is recognized.")]
+ [Step(5, "If device USB Host feature is not supported, press PASS after 'not supported' message is shown")]
[Postcondition(1, "NA")]
public async Task DeviceHotPlugged_Attach()
{
[Property("SPEC_URL", "-")]
[Property("CRITERIA", "EVL")]
[Property("AUTHOR", "Pawel Szewczyk, p.szewczyk@samsung.com")]
- [Precondition(1, "Connect a USB device")]
+ [Precondition(1, "Connect a USB device (e.g., USB mouse or keyboard")]
+ [Precondition(2, "Use an OTG cable for micro USB port")]
[Step(1, "Click run TC")]
- [Step(2, "Disconnect the USB device")]
+ [Step(2, "Disconnect the USB device or the OTG cable for micro USB port")]
[Step(3, "Testcase will pass automatically if device disconnection is recognized.")]
[Step(4, "If device USB Host feature is not supported, press PASS after 'not supported' message is shown")]
[Postcondition(1, "NA")]