2005-08-02 Bob Rossi <bob@brasko.net>

	* gdb.mi/mi-syn-frame.exp, gdb.mi/mi2-syn-frame.exp: Add MESSAGE
	parameter to mi_gdb_test.
	* lib/mi-support.exp (mi_gdb_test): Make MESSAGE parameter necessary.

diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog
index ef3980c..a787032 100644 (file)
--- a/gdb/testsuite/ChangeLog
+++ b/gdb/testsuite/ChangeLog
@@ -1,3 +1,9 @@
+2005-08-02   Bob Rossi  <bob@brasko.net>
+  
+       * gdb.mi/mi-syn-frame.exp, gdb.mi/mi2-syn-frame.exp: Add MESSAGE
+       parameter to mi_gdb_test.
+       * lib/mi-support.exp (mi_gdb_test): Make MESSAGE parameter necessary.
+
 2005-07-31  Daniel Jacobowitz  <dan@codesourcery.com>
 
        * gdb.mi/mi-var-child.c (do_children_tests): Initialize

diff --git a/gdb/testsuite/gdb.mi/mi-syn-frame.exp b/gdb/testsuite/gdb.mi/mi-syn-frame.exp
index 011cb45..a5e9965 100644 (file)
--- a/gdb/testsuite/gdb.mi/mi-syn-frame.exp
+++ b/gdb/testsuite/gdb.mi/mi-syn-frame.exp
@@ -44,7 +44,9 @@ mi_gdb_reinitialize_dir $srcdir/$subdir
 mi_gdb_load ${binfile}
 mi_run_to_main
 
-mi_gdb_test "400-break-insert foo" "400\\^done,bkpt=\{number=\"2\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"foo\",file=\".*mi-syn-frame.c\",line=\"$decimal\",times=\"0\"\}"
+mi_gdb_test "400-break-insert foo" \
+  "400\\^done,bkpt=\{number=\"2\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"foo\",file=\".*mi-syn-frame.c\",line=\"$decimal\",times=\"0\"\}" \
+  "insert breakpoint foo"
 
 
 #
@@ -69,21 +71,29 @@ gdb_expect {
   }
 }
 
-mi_gdb_test "404-stack-list-frames 0 0" "404\\^done,stack=\\\[frame=\{level=\"0\",addr=\"$hex\",func=\"main\",file=\".*mi-syn-frame.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$decimal\"\}.*\\\]"
+mi_gdb_test "404-stack-list-frames 0 0" \
+  "404\\^done,stack=\\\[frame=\{level=\"0\",addr=\"$hex\",func=\"main\",file=\".*mi-syn-frame.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$decimal\"\}.*\\\]" \
+  "list stack frames"
 
 
 #
 # Call have_a_very_merry_interrupt() which will eventually raise a signal
 # that's caught by handler() which calls subroutine().
 
-mi_gdb_test "405-break-insert subroutine" "405\\^done,bkpt=\{number=\"3\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"subroutine\",file=\".*mi-syn-frame.c\",line=\"$decimal\",times=\"0\"\}"
+mi_gdb_test "405-break-insert subroutine" \
+  "405\\^done,bkpt=\{number=\"3\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"subroutine\",file=\".*mi-syn-frame.c\",line=\"$decimal\",times=\"0\"\}" \
+  "insert breakpoint subroutine"
 
-mi_gdb_test "406-data-evaluate-expression have_a_very_merry_interrupt()" "Waiting to get a signal\[\r\n\]+\\&\"The program being debugged stopped while in a function called from GDB.\\\\n\"\[\r\n\]+\\&\"When the function \\(have_a_very_merry_interrupt\\) is done executing, GDB will silently\\\\n\"\[\r\n\]+\\&\"stop \\(instead of continuing to evaluate the expression containing\\\\n\"\[\r\n\]+\\&\"the function call\\).\\\\n\"\[\r\n\]+406\\^error,msg=\"The program being debugged stopped while in a function called from GDB.\\\\nWhen the function \\(have_a_very_merry_interrupt\\) is done executing, GDB will silently\\\\nstop \\(instead of continuing to evaluate the expression containing\\\\nthe function call\\).\""
+mi_gdb_test "406-data-evaluate-expression have_a_very_merry_interrupt()" \
+  "Waiting to get a signal\[\r\n\]+\\&\"The program being debugged stopped while in a function called from GDB.\\\\n\"\[\r\n\]+\\&\"When the function \\(have_a_very_merry_interrupt\\) is done executing, GDB will silently\\\\n\"\[\r\n\]+\\&\"stop \\(instead of continuing to evaluate the expression containing\\\\n\"\[\r\n\]+\\&\"the function call\\).\\\\n\"\[\r\n\]+406\\^error,msg=\"The program being debugged stopped while in a function called from GDB.\\\\nWhen the function \\(have_a_very_merry_interrupt\\) is done executing, GDB will silently\\\\nstop \\(instead of continuing to evaluate the expression containing\\\\nthe function call\\).\"" \
+  "evaluate expression have_a_very_merry_interrupt"
 
 # We should have both a signal handler and a call dummy frame
 # in this next output.
 
-mi_gdb_test "407-stack-list-frames" "407\\^done,stack=\\\[frame=\{level=\"0\",addr=\"$hex\",func=\"subroutine\",file=\".*mi-syn-frame.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$decimal\"\},frame=\{level=\"1\",addr=\"$hex\",func=\"handler\",file=\".*mi-syn-frame.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$decimal\"\},frame=\{level=\"2\",addr=\"$hex\",func=\"<signal handler called>\"\},.*frame=\{level=\"$decimal\",addr=\"$hex\",func=\"have_a_very_merry_interrupt\",file=\".*mi-syn-frame.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$decimal\"\},frame=\{level=\"$decimal\",addr=\"$hex\",func=\"<function called from gdb>\"\},frame=\{level=\"$decimal\",addr=\"$hex\",func=\"main\",file=\".*mi-syn-frame.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$decimal\"\}.*\\\]"
+mi_gdb_test "407-stack-list-frames" \
+  "407\\^done,stack=\\\[frame=\{level=\"0\",addr=\"$hex\",func=\"subroutine\",file=\".*mi-syn-frame.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$decimal\"\},frame=\{level=\"1\",addr=\"$hex\",func=\"handler\",file=\".*mi-syn-frame.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$decimal\"\},frame=\{level=\"2\",addr=\"$hex\",func=\"<signal handler called>\"\},.*frame=\{level=\"$decimal\",addr=\"$hex\",func=\"have_a_very_merry_interrupt\",file=\".*mi-syn-frame.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$decimal\"\},frame=\{level=\"$decimal\",addr=\"$hex\",func=\"<function called from gdb>\"\},frame=\{level=\"$decimal\",addr=\"$hex\",func=\"main\",file=\".*mi-syn-frame.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$decimal\"\}.*\\\]" \
+  "list stack frames"
 
 
 send_gdb "408-exec-continue\n"
@@ -96,7 +106,9 @@ gdb_expect {
   }
 }
 
-mi_gdb_test "409-stack-list-frames 0 0" "409\\^done,stack=\\\[frame=\{level=\"0\",addr=\"$hex\",func=\"main\",file=\".*mi-syn-frame.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$decimal\"\}.*\\\]"
+mi_gdb_test "409-stack-list-frames 0 0" \
+  "409\\^done,stack=\\\[frame=\{level=\"0\",addr=\"$hex\",func=\"main\",file=\".*mi-syn-frame.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$decimal\"\}.*\\\]" \
+  "list stack frames"
 
 #
 # Call bar() by hand, which should get an exception while running.

diff --git a/gdb/testsuite/gdb.mi/mi2-syn-frame.exp b/gdb/testsuite/gdb.mi/mi2-syn-frame.exp
index d0c7313..eb1cbe0 100644 (file)
--- a/gdb/testsuite/gdb.mi/mi2-syn-frame.exp
+++ b/gdb/testsuite/gdb.mi/mi2-syn-frame.exp
@@ -45,7 +45,9 @@ mi_gdb_reinitialize_dir $srcdir/$subdir
 mi_gdb_load ${binfile}
 mi_run_to_main
 
-mi_gdb_test "400-break-insert foo" "400\\^done,bkpt=\{number=\"2\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"foo\",file=\".*mi-syn-frame.c\",line=\"$decimal\",times=\"0\"\}"
+mi_gdb_test "400-break-insert foo" \
+  "400\\^done,bkpt=\{number=\"2\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"foo\",file=\".*mi-syn-frame.c\",line=\"$decimal\",times=\"0\"\}" \
+  "insert breakpoint foo"
 
 
 #
@@ -70,21 +72,29 @@ gdb_expect {
   }
 }
 
-mi_gdb_test "404-stack-list-frames 0 0" "404\\^done,stack=\\\[frame=\{level=\"0\",addr=\"$hex\",func=\"main\",file=\".*mi-syn-frame.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$decimal\"\}.*\\\]"
+mi_gdb_test "404-stack-list-frames 0 0" \
+  "404\\^done,stack=\\\[frame=\{level=\"0\",addr=\"$hex\",func=\"main\",file=\".*mi-syn-frame.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$decimal\"\}.*\\\]" \
+  "list stack frames"
 
 
 #
 # Call have_a_very_merry_interrupt() which will eventually raise a signal
 # that's caught by handler() which calls subroutine().
 
-mi_gdb_test "405-break-insert subroutine" "405\\^done,bkpt=\{number=\"3\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"subroutine\",file=\".*mi-syn-frame.c\",line=\"$decimal\",times=\"0\"\}"
+mi_gdb_test "405-break-insert subroutine" \
+  "405\\^done,bkpt=\{number=\"3\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"subroutine\",file=\".*mi-syn-frame.c\",line=\"$decimal\",times=\"0\"\}" \
+  "insert breakpoint subroutine"
 
-mi_gdb_test "406-data-evaluate-expression have_a_very_merry_interrupt()" "Waiting to get a signal\[\r\n\]+\\&\"The program being debugged stopped while in a function called from GDB.\\\\n\"\[\r\n\]+\\&\"When the function \\(have_a_very_merry_interrupt\\) is done executing, GDB will silently\\\\n\"\[\r\n\]+\\&\"stop \\(instead of continuing to evaluate the expression containing\\\\n\"\[\r\n\]+\\&\"the function call\\).\\\\n\"\[\r\n\]+406\\^error,msg=\"The program being debugged stopped while in a function called from GDB.\\\\nWhen the function \\(have_a_very_merry_interrupt\\) is done executing, GDB will silently\\\\nstop \\(instead of continuing to evaluate the expression containing\\\\nthe function call\\).\""
+mi_gdb_test "406-data-evaluate-expression have_a_very_merry_interrupt()" \
+  "Waiting to get a signal\[\r\n\]+\\&\"The program being debugged stopped while in a function called from GDB.\\\\n\"\[\r\n\]+\\&\"When the function \\(have_a_very_merry_interrupt\\) is done executing, GDB will silently\\\\n\"\[\r\n\]+\\&\"stop \\(instead of continuing to evaluate the expression containing\\\\n\"\[\r\n\]+\\&\"the function call\\).\\\\n\"\[\r\n\]+406\\^error,msg=\"The program being debugged stopped while in a function called from GDB.\\\\nWhen the function \\(have_a_very_merry_interrupt\\) is done executing, GDB will silently\\\\nstop \\(instead of continuing to evaluate the expression containing\\\\nthe function call\\).\"" \
+  "evaluate expression have_a_very_merry_interrupt"
 
 # We should have both a signal handler and a call dummy frame
 # in this next output.
 
-mi_gdb_test "407-stack-list-frames" "407\\^done,stack=\\\[frame=\{level=\"0\",addr=\"$hex\",func=\"subroutine\",file=\".*mi-syn-frame.c\",line=\"$decimal\"\},frame=\{level=\"1\",addr=\"$hex\",func=\"handler\",file=\".*mi-syn-frame.c\",line=\"$decimal\"\},frame=\{level=\"2\",addr=\"$hex\",func=\"<signal handler called>\"\},.*frame=\{level=\"$decimal\",addr=\"$hex\",func=\"have_a_very_merry_interrupt\",file=\".*mi-syn-frame.c\",line=\"$decimal\"\},frame=\{level=\"$decimal\",addr=\"$hex\",func=\"<function called from gdb>\"\},frame=\{level=\"$decimal\",addr=\"$hex\",func=\"main\",file=\".*mi-syn-frame.c\",line=\"$decimal\"\}.*\\\]"
+mi_gdb_test "407-stack-list-frames" \
+  "407\\^done,stack=\\\[frame=\{level=\"0\",addr=\"$hex\",func=\"subroutine\",file=\".*mi-syn-frame.c\",line=\"$decimal\"\},frame=\{level=\"1\",addr=\"$hex\",func=\"handler\",file=\".*mi-syn-frame.c\",line=\"$decimal\"\},frame=\{level=\"2\",addr=\"$hex\",func=\"<signal handler called>\"\},.*frame=\{level=\"$decimal\",addr=\"$hex\",func=\"have_a_very_merry_interrupt\",file=\".*mi-syn-frame.c\",line=\"$decimal\"\},frame=\{level=\"$decimal\",addr=\"$hex\",func=\"<function called from gdb>\"\},frame=\{level=\"$decimal\",addr=\"$hex\",func=\"main\",file=\".*mi-syn-frame.c\",line=\"$decimal\"\}.*\\\]" \
+  "list stack frames"
 
 
 send_gdb "408-exec-continue\n"
@@ -97,7 +107,9 @@ gdb_expect {
   }
 }
 
-mi_gdb_test "409-stack-list-frames 0 0" "409\\^done,stack=\\\[frame=\{level=\"0\",addr=\"$hex\",func=\"main\",file=\".*mi-syn-frame.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$decimal\"\}.*\\\]"
+mi_gdb_test "409-stack-list-frames 0 0" \
+  "409\\^done,stack=\\\[frame=\{level=\"0\",addr=\"$hex\",func=\"main\",file=\".*mi-syn-frame.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$decimal\"\}.*\\\]" \
+  "list stack frames"
 
 #
 # Call bar() by hand, which should get an exception while running.

diff --git a/gdb/testsuite/lib/mi-support.exp b/gdb/testsuite/lib/mi-support.exp
index c03c3cc..da4fd34 100644 (file)
--- a/gdb/testsuite/lib/mi-support.exp
+++ b/gdb/testsuite/lib/mi-support.exp
@@ -517,10 +517,9 @@ proc mi_gdb_load { arg } {
 #   this is the null string no command is sent.
 # PATTERN is the pattern to match for a PASS, and must NOT include
 #   the \r\n sequence immediately before the gdb prompt.
-# MESSAGE is an optional message to be printed.  If this is
-#   omitted, then the pass/fail messages use the command string as the
-#   message.  (If this is the empty string, then sometimes we don't
-#   call pass or fail at all; I don't understand this at all.)
+# MESSAGE is the message to be printed.  (If this is the empty string, 
+#   then sometimes we don't call pass or fail at all; I don't 
+#   understand this at all.)
 #
 # Returns:
 #    1 if the test failed,
@@ -533,13 +532,9 @@ proc mi_gdb_test { args } {
     global GDB expect_out
     upvar timeout timeout
 
-    if [llength $args]>2 then {
-       set message [lindex $args 2]
-    } else {
-       set message [lindex $args 0]
-    }
     set command [lindex $args 0]
     set pattern [lindex $args 1]
+    set message [lindex $args 2]
 
     if [llength $args]==5 {
        set question_string [lindex $args 3];