rockchip: rk3588-rock-5b: Fix sdmmc boot
authorJonas Karlman <jonas@kwiboo.se>
Mon, 17 Apr 2023 19:07:14 +0000 (19:07 +0000)
committerKever Yang <kever.yang@rock-chips.com>
Fri, 21 Apr 2023 07:16:01 +0000 (15:16 +0800)
Running U-Boot from a SD-card on ROCK 5 Model B fails to load atf using
DMA and prints debug_uart messages.

  <debug_uart>

  <debug_uart>

  U-Boot SPL 2023.04-rc3 (Mar 12 2023 - 00:30:16 +0000)
  Trying to boot from MMC1
  ## Checking hash(es) for config config-1 ... OK
  ## Checking hash(es) for Image atf-1 ... sha256 error!
  Bad hash value for 'hash' hash node in 'atf-1' image node
  mmc_load_image_raw_sector: mmc block read error
  SPL: failed to boot from all boot devices
  ### ERROR ### Please RESET the board ###

Use fifo-mode to disable DMA in SPL, add same-as-spl to boot-order and
remove DEBUG_UART_ANNOUNCE option to fix this.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
arch/arm/dts/rk3588-rock-5b-u-boot.dtsi
configs/rock5b-rk3588_defconfig

index bee4c32..b61d6e0 100644 (file)
        };
 
        chosen {
-               u-boot,spl-boot-order = &sdmmc;
+               u-boot,spl-boot-order = "same-as-spl", &sdmmc;
        };
 };
 
 &sdmmc {
        bus-width = <4>;
        bootph-pre-ram;
+       u-boot,spl-fifo-mode;
        status = "okay";
 };
index 6619938..3fcc6a2 100644 (file)
@@ -66,6 +66,5 @@ CONFIG_PWM_ROCKCHIP=y
 CONFIG_SPL_RAM=y
 CONFIG_BAUDRATE=1500000
 CONFIG_DEBUG_UART_SHIFT=2
-CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_SYSRESET=y
 CONFIG_ERRNO_STR=y