if (status < 0)
goto error;
- if (state->m_OperationMode != oMode) {
- switch (state->m_OperationMode) {
- /* OM_NONE was added for start up */
- case OM_NONE:
- break;
- case OM_DVBT:
- status = MPEGTSStop(state);
- if (status < 0)
- goto error;
- status = PowerDownDVBT(state, true);
- if (status < 0)
- goto error;
- state->m_OperationMode = OM_NONE;
- break;
- case OM_QAM_ITU_A: /* fallthrough */
- case OM_QAM_ITU_C:
- status = MPEGTSStop(state);
- if (status < 0)
- goto error;
- status = PowerDownQAM(state);
- if (status < 0)
- goto error;
- state->m_OperationMode = OM_NONE;
- break;
- case OM_QAM_ITU_B:
- default:
- status = -EINVAL;
+ /* Device is already at the required mode */
+ if (state->m_OperationMode == oMode)
+ return 0;
+
+ switch (state->m_OperationMode) {
+ /* OM_NONE was added for start up */
+ case OM_NONE:
+ break;
+ case OM_DVBT:
+ status = MPEGTSStop(state);
+ if (status < 0)
goto error;
- }
+ status = PowerDownDVBT(state, true);
+ if (status < 0)
+ goto error;
+ state->m_OperationMode = OM_NONE;
+ break;
+ case OM_QAM_ITU_A: /* fallthrough */
+ case OM_QAM_ITU_C:
+ status = MPEGTSStop(state);
+ if (status < 0)
+ goto error;
+ status = PowerDownQAM(state);
+ if (status < 0)
+ goto error;
+ state->m_OperationMode = OM_NONE;
+ break;
+ case OM_QAM_ITU_B:
+ default:
+ status = -EINVAL;
+ goto error;
+ }
- /*
- Power up new standard
- */
- switch (oMode) {
- case OM_DVBT:
- state->m_OperationMode = oMode;
- status = SetDVBTStandard(state, oMode);
- if (status < 0)
- goto error;
- break;
- case OM_QAM_ITU_A: /* fallthrough */
- case OM_QAM_ITU_C:
- state->m_OperationMode = oMode;
- status = SetQAMStandard(state, oMode);
- if (status < 0)
- goto error;
- break;
- case OM_QAM_ITU_B:
- default:
- status = -EINVAL;
- }
+ /*
+ Power up new standard
+ */
+ switch (oMode) {
+ case OM_DVBT:
+ state->m_OperationMode = oMode;
+ status = SetDVBTStandard(state, oMode);
+ if (status < 0)
+ goto error;
+ break;
+ case OM_QAM_ITU_A: /* fallthrough */
+ case OM_QAM_ITU_C:
+ state->m_OperationMode = oMode;
+ status = SetQAMStandard(state, oMode);
+ if (status < 0)
+ goto error;
+ break;
+ case OM_QAM_ITU_B:
+ default:
+ status = -EINVAL;
}
error:
if (status < 0)
clpCyclen = 500;
clpSumMax = 1023;
- if (IsQAM(state)) {
- /* Standard specific settings */
- clpSumMin = 8;
- clpDirTo = (u16) -9;
- clpCtrlMode = 0;
- snsSumMin = 8;
- snsDirTo = (u16) -9;
- kiInnergainMin = (u16) -1030;
- } else {
- status = -EINVAL;
- goto error;
- }
- if (IsQAM(state)) {
- ifIaccuHiTgtMax = 0x2380;
- ifIaccuHiTgt = 0x2380;
- ingainTgtMin = 0x0511;
- ingainTgt = 0x0511;
- ingainTgtMax = 5119;
- fastClpCtrlDelay =
- state->m_qamIfAgcCfg.FastClipCtrlDelay;
- } else {
- ifIaccuHiTgtMax = 0x1200;
- ifIaccuHiTgt = 0x1200;
- ingainTgtMin = 13424;
- ingainTgt = 13424;
- ingainTgtMax = 30000;
- fastClpCtrlDelay =
- state->m_dvbtIfAgcCfg.FastClipCtrlDelay;
+ /* AGCInit() not available for DVBT; init done in microcode */
+ if (!IsQAM(state)) {
+ printk(KERN_ERR "drxk: %s: mode %d is not DVB-C\n", __func__, state->m_OperationMode);
+ return -EINVAL;
}
+
+ /* FIXME: Analog TV AGC require different settings */
+
+ /* Standard specific settings */
+ clpSumMin = 8;
+ clpDirTo = (u16) -9;
+ clpCtrlMode = 0;
+ snsSumMin = 8;
+ snsDirTo = (u16) -9;
+ kiInnergainMin = (u16) -1030;
+ ifIaccuHiTgtMax = 0x2380;
+ ifIaccuHiTgt = 0x2380;
+ ingainTgtMin = 0x0511;
+ ingainTgt = 0x0511;
+ ingainTgtMax = 5119;
+ fastClpCtrlDelay = state->m_qamIfAgcCfg.FastClipCtrlDelay;
+
status = write16(state, SCU_RAM_AGC_FAST_CLP_CTRL_DELAY__A, fastClpCtrlDelay);
if (status < 0)
goto error;
status = read16(state, SCU_RAM_AGC_KI__A, &data);
if (status < 0)
goto error;
- if (IsQAM(state)) {
- data = 0x0657;
- data &= ~SCU_RAM_AGC_KI_RF__M;
- data |= (DRXK_KI_RAGC_QAM << SCU_RAM_AGC_KI_RF__B);
- data &= ~SCU_RAM_AGC_KI_IF__M;
- data |= (DRXK_KI_IAGC_QAM << SCU_RAM_AGC_KI_IF__B);
- }
+
+ data = 0x0657;
+ data &= ~SCU_RAM_AGC_KI_RF__M;
+ data |= (DRXK_KI_RAGC_QAM << SCU_RAM_AGC_KI_RF__B);
+ data &= ~SCU_RAM_AGC_KI_IF__M;
+ data |= (DRXK_KI_IAGC_QAM << SCU_RAM_AGC_KI_IF__B);
+
status = write16(state, SCU_RAM_AGC_KI__A, data);
error:
if (status < 0)
#undef DRXK_QAMA_TAPS_SELECT
#endif
+ dprintk(1, "\n");
+
/* added antenna switch */
SwitchAntennaToQAM(state);