F: arch/arm/mach-sa1100/jornada720.c
F: arch/arm/mach-sa1100/include/mach/jornada720.h
+ARM/INCOME PXA270 SUPPORT
+M: Marek Vasut <marek.vasut@gmail.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-pxa/income.c
+F: arch/arm/mach-pxa/include/mach-pxa/income.h
+
ARM/INTEL IOP32X ARM ARCHITECTURE
M: Lennert Buytenhek <kernel@wantstofly.org>
M: Dan Williams <dan.j.williams@intel.com>
OBJS += head-xscale.o
endif
-ifeq ($(CONFIG_PXA_SHARPSL),y)
+ifeq ($(CONFIG_PXA_SHARPSL_DETECT_MACH_ID),y)
OBJS += head-sharpsl.o
endif
return 0;
}
-int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
-{
- dev_dbg(dev, "%s: dma_addr %08x, size %08x\n",
- __func__, dma_addr, size);
- return (dev->bus == &pci_bus_type) &&
- ((dma_addr + size - PHYS_OFFSET) >= SZ_64M);
-}
-
int __init it8152_pci_setup(int nr, struct pci_sys_data *sys)
{
it8152_io.start = IT8152_IO_BASE + 0x12000;
* DMA access and 1 if the buffer needs to be bounced.
*
*/
+#ifdef CONFIG_SA1111
extern int dma_needs_bounce(struct device*, dma_addr_t, size_t);
+#else
+static inline int dma_needs_bounce(struct device *dev, dma_addr_t addr,
+ size_t size)
+{
+ return 0;
+}
+#endif
/*
* The DMA API, implemented by dmabounce.c. See below for descriptions.
#define SCOOP_GPWR 0x24
#define SCOOP_GPRR 0x28
-#define SCOOP_GPCR_PA22 ( 1 << 12 )
-#define SCOOP_GPCR_PA21 ( 1 << 11 )
-#define SCOOP_GPCR_PA20 ( 1 << 10 )
-#define SCOOP_GPCR_PA19 ( 1 << 9 )
-#define SCOOP_GPCR_PA18 ( 1 << 8 )
-#define SCOOP_GPCR_PA17 ( 1 << 7 )
-#define SCOOP_GPCR_PA16 ( 1 << 6 )
-#define SCOOP_GPCR_PA15 ( 1 << 5 )
-#define SCOOP_GPCR_PA14 ( 1 << 4 )
-#define SCOOP_GPCR_PA13 ( 1 << 3 )
-#define SCOOP_GPCR_PA12 ( 1 << 2 )
-#define SCOOP_GPCR_PA11 ( 1 << 1 )
+#define SCOOP_CPR_OUT (1 << 7)
+#define SCOOP_CPR_SD_3V (1 << 2)
+#define SCOOP_CPR_CF_XV (1 << 1)
+#define SCOOP_CPR_CF_3V (1 << 0)
+
+#define SCOOP_GPCR_PA22 (1 << 12)
+#define SCOOP_GPCR_PA21 (1 << 11)
+#define SCOOP_GPCR_PA20 (1 << 10)
+#define SCOOP_GPCR_PA19 (1 << 9)
+#define SCOOP_GPCR_PA18 (1 << 8)
+#define SCOOP_GPCR_PA17 (1 << 7)
+#define SCOOP_GPCR_PA16 (1 << 6)
+#define SCOOP_GPCR_PA15 (1 << 5)
+#define SCOOP_GPCR_PA14 (1 << 4)
+#define SCOOP_GPCR_PA13 (1 << 3)
+#define SCOOP_GPCR_PA12 (1 << 2)
+#define SCOOP_GPCR_PA11 (1 << 1)
struct scoop_config {
unsigned short io_out;
MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform")
.phys_io = APB_PHYS_BASE,
- .boot_params = 0x00000100,
.io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
- .map_io = pxa_map_io,
+ .map_io = mmp_map_io,
.init_irq = pxa168_init_irq,
.timer = &pxa168_timer,
.init_machine = common_init,
MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform")
.phys_io = APB_PHYS_BASE,
- .boot_params = 0x00000100,
.io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
- .map_io = pxa_map_io,
+ .map_io = mmp_map_io,
.init_irq = pxa168_init_irq,
.timer = &pxa168_timer,
.init_machine = common_init,
MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform")
.phys_io = APB_PHYS_BASE,
- .boot_params = 0x00000100,
.io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
- .map_io = pxa_map_io,
+ .map_io = mmp_map_io,
.init_irq = pxa168_init_irq,
.timer = &pxa168_timer,
.init_machine = avengers_lite_init,
},
};
-void __init pxa_map_io(void)
+void __init mmp_map_io(void)
{
iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
}
struct sys_timer;
extern void timer_init(int irq);
-extern void mmp2_clear_pmic_int(void);
-
-extern struct sys_timer pxa168_timer;
-extern struct sys_timer pxa910_timer;
-extern struct sys_timer mmp2_timer;
-extern void __init pxa168_init_irq(void);
-extern void __init pxa910_init_irq(void);
-extern void __init mmp2_init_icu(void);
-extern void __init mmp2_init_irq(void);
extern void __init icu_init_irq(void);
-extern void __init pxa_map_io(void);
+extern void __init mmp_map_io(void);
MACHINE_START(FLINT, "Flint Development Platform")
.phys_io = APB_PHYS_BASE,
- .boot_params = 0x00000100,
.io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
- .map_io = pxa_map_io,
+ .map_io = mmp_map_io,
.init_irq = mmp2_init_irq,
.timer = &mmp2_timer,
.init_machine = flint_init,
+#ifndef __MACH_DEVICE_H
+#define __MACH_DEVICE_H
+
#include <linux/types.h>
#define MAX_RESOURCE_DMA 2
}
extern int pxa_register_device(struct pxa_device_desc *, void *, size_t);
+#endif /* __MACH_DEVICE_H */
#ifndef __ASM_MACH_MMP2_H
#define __ASM_MACH_MMP2_H
+struct sys_timer;
+
+extern struct sys_timer mmp2_timer;
+extern void __init mmp2_init_icu(void);
+extern void __init mmp2_init_irq(void);
+extern void mmp2_clear_pmic_int(void);
+
#include <linux/i2c.h>
#include <mach/devices.h>
#include <plat/i2c.h>
#ifndef __ASM_MACH_PXA168_H
#define __ASM_MACH_PXA168_H
+struct sys_timer;
+
+extern struct sys_timer pxa168_timer;
+extern void __init pxa168_init_irq(void);
+
#include <linux/i2c.h>
#include <mach/devices.h>
#include <plat/i2c.h>
#ifndef __ASM_MACH_PXA910_H
#define __ASM_MACH_PXA910_H
+struct sys_timer;
+
+extern struct sys_timer pxa910_timer;
+extern void __init pxa910_init_irq(void);
+
#include <linux/i2c.h>
#include <mach/devices.h>
#include <plat/i2c.h>
#include <linux/io.h>
#include <mach/regs-icu.h>
+#include <mach/mmp2.h>
#include "common.h"
MACHINE_START(MARVELL_JASPER, "Jasper Development Platform")
.phys_io = APB_PHYS_BASE,
- .boot_params = 0x00000100,
.io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
- .map_io = pxa_map_io,
+ .map_io = mmp_map_io,
.init_irq = mmp2_init_irq,
.timer = &mmp2_timer,
.init_machine = jasper_init,
#include <asm/hardware/cache-tauros2.h>
+#include <asm/mach/time.h>
#include <mach/addr-map.h>
#include <mach/regs-apbc.h>
#include <mach/regs-apmu.h>
#include <mach/mfp.h>
#include <mach/gpio.h>
#include <mach/devices.h>
+#include <mach/mmp2.h>
#include "common.h"
#include "clock.h"
}
postcore_initcall(mmp2_init);
+static void __init mmp2_timer_init(void)
+{
+ unsigned long clk_rst;
+
+ __raw_writel(APBC_APBCLK | APBC_RST, APBC_MMP2_TIMERS);
+
+ /*
+ * enable bus/functional clock, enable 6.5MHz (divider 4),
+ * release reset
+ */
+ clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
+ __raw_writel(clk_rst, APBC_MMP2_TIMERS);
+
+ timer_init(IRQ_MMP2_TIMER1);
+}
+
+struct sys_timer mmp2_timer = {
+ .init = mmp2_timer_init,
+};
+
/* on-chip devices */
MMP2_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4030000, 0x30, 4, 5);
MMP2_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4017000, 0x30, 20, 21);
MACHINE_START(TAVOREVB, "PXA910 Evaluation Board (aka TavorEVB)")
.phys_io = APB_PHYS_BASE,
- .boot_params = 0x00000100,
.io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
- .map_io = pxa_map_io,
+ .map_io = mmp_map_io,
.init_irq = pxa910_init_irq,
.timer = &pxa910_timer,
.init_machine = tavorevb_init,
clocksource_register(&cksrc);
clockevents_register_device(&ckevt);
}
-
-static void __init mmp2_timer_init(void)
-{
- unsigned long clk_rst;
-
- __raw_writel(APBC_APBCLK | APBC_RST, APBC_MMP2_TIMERS);
-
- /*
- * enable bus/functional clock, enable 6.5MHz (divider 4),
- * release reset
- */
- clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
- __raw_writel(clk_rst, APBC_MMP2_TIMERS);
-
- timer_init(IRQ_MMP2_TIMER1);
-}
-
-struct sys_timer mmp2_timer = {
- .init = mmp2_timer_init,
-};
-
MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")
.phys_io = APB_PHYS_BASE,
- .boot_params = 0x00000100,
.io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
- .map_io = pxa_map_io,
+ .map_io = mmp_map_io,
.init_irq = pxa910_init_irq,
.timer = &pxa910_timer,
.init_machine = ttc_dkb_init,
bool "Toradex Colibri PXA270"
select PXA27x
+config MACH_COLIBRI_PXA270_EVALBOARD
+ bool "Toradex Colibri Evaluation Carrier Board support (PXA270)"
+ depends on MACH_COLIBRI
+
+config MACH_COLIBRI_PXA270_INCOME
+ bool "Income s.r.o. PXA270 SBC"
+ depends on MACH_COLIBRI
+ select PXA27x
+ select HAVE_PWM
+ select PXA_HAVE_BOARD_IRQS
+
config MACH_COLIBRI300
bool "Toradex Colibri PXA300/310"
select PXA3xx
bool "PXA based Palm PDAs"
select HAVE_PWM
+config MACH_PALM27X
+ bool
+
config MACH_PALMTE2
bool "Palm Tungsten|E2"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
+ select MACH_PALM27X
help
Say Y here if you intend to run this kernel on a Palm Tungsten|T5
handheld computer.
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
+ select MACH_PALM27X
help
Say Y here if you intend to run this kernel on a Palm T|X
handheld computer.
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
+ select MACH_PALM27X
help
Say Y here if you intend to run this kernel on Palm Zire 72
handheld computer.
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
+ select MACH_PALM27X
help
Say Y here if you intend to run this kernel on a Palm LifeDrive
handheld computer.
SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
handheld computer.
-config SHARPSL_PM
- bool
- select APM_EMULATION
- select SHARPSL_PM_MAX1111
-
-config SHARPSL_PM_MAX1111
- bool
- depends on !CORGI_SSP_DEPRECATED
- select HWMON
- select SENSORS_MAX1111
+config PXA_SHARPSL_DETECT_MACH_ID
+ bool "Detect machine ID at run-time in the decompressor"
+ depends on PXA_SHARPSL
+ help
+ Say Y here if you want the zImage decompressor to detect
+ the Zaurus machine ID at run-time. For latest kexec-based
+ boot loader, this is not necessary.
config MACH_POODLE
bool "Enable Sharp SL-5600 (Poodle) Support"
select PXA25x
select PXA_HAVE_BOARD_IRQS
+config TOSA_BT
+ tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
+ depends on MACH_TOSA
+ select RFKILL
+ help
+ This is a simple driver that is able to control
+ the state of built in bluetooth chip on tosa.
+
+config TOSA_USE_EXT_KEYCODES
+ bool "Tosa keyboard: use extended keycodes"
+ depends on MACH_TOSA
+ default n
+ help
+ Say Y here to enable the tosa keyboard driver to generate extended
+ (>= 127) keycodes. Be aware, that they can't be correctly interpreted
+ by either console keyboard driver or by Kdrive keybd driver.
+
+ Say Y only if you know, what you are doing!
+
config MACH_ICONTROL
bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
select CPU_PXA320
help
Enable common support for Sharp Cxx00 models
-config TOSA_BT
- tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
- depends on MACH_TOSA
- select RFKILL
- help
- This is a simple driver that is able to control
- the state of built in bluetooth chip on tosa.
-
-config TOSA_USE_EXT_KEYCODES
- bool "Tosa keyboard: use extended keycodes"
- depends on MACH_TOSA
- default n
- help
- Say Y here to enable the tosa keyboard driver to generate extended
- (>= 127) keycodes. Be aware, that they can't be correctly interpreted
- by either console keyboard driver or by Kdrive keybd driver.
-
- Say Y only if you know, what you are doing!
+config SHARPSL_PM
+ bool
+ select APM_EMULATION
+ select SHARPSL_PM_MAX1111
+config SHARPSL_PM_MAX1111
+ bool
+ select HWMON
+ select SENSORS_MAX1111
config PXA_HAVE_BOARD_IRQS
bool
obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o
obj-$(CONFIG_GUMSTIX_AM200EPD) += am200epd.o
obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o
-obj-$(CONFIG_MACH_INTELMOTE2) += imote2.o
+obj-$(CONFIG_MACH_INTELMOTE2) += stargate2.o
obj-$(CONFIG_MACH_STARGATE2) += stargate2.o
obj-$(CONFIG_MACH_XCEP) += xcep.o
obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o
obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
obj-$(CONFIG_MACH_PCM027) += pcm027.o
obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
-obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o
+obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o
+obj-$(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD) += colibri-pxa270-evalboard.o
+obj-$(CONFIG_MACH_COLIBRI_PXA270_INCOME) += colibri-pxa270-income.o
obj-$(CONFIG_MACH_COLIBRI300) += colibri-pxa3xx.o colibri-pxa300.o
obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o
obj-$(CONFIG_MACH_VPAC270) += vpac270.o
obj-$(CONFIG_MACH_MP900C) += mp900.o
obj-$(CONFIG_MACH_PALMTE2) += palmte2.o
obj-$(CONFIG_MACH_PALMTC) += palmtc.o
+obj-$(CONFIG_MACH_PALM27X) += palm27x.o
obj-$(CONFIG_MACH_PALMT5) += palmt5.o
obj-$(CONFIG_MACH_PALMTX) += palmtx.o
obj-$(CONFIG_MACH_PALMZ72) += palmz72.o
obj-$(CONFIG_MACH_TOSA) += tosa.o
obj-$(CONFIG_MACH_ICONTROL) += icontrol.o mxm8x10.o
obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o
-obj-$(CONFIG_MACH_E330) += e330.o
-obj-$(CONFIG_MACH_E350) += e350.o
-obj-$(CONFIG_MACH_E740) += e740.o
-obj-$(CONFIG_MACH_E750) += e750.o
-obj-$(CONFIG_MACH_E400) += e400.o
-obj-$(CONFIG_MACH_E800) += e800.o
obj-$(CONFIG_MACH_RAUMFELD_RC) += raumfeld.o
obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR) += raumfeld.o
obj-$(CONFIG_MACH_RAUMFELD_SPEAKER) += raumfeld.o
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/ioport.h>
+#include <linux/ucb1400.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/types.h>
+#include <linux/i2c/pcf857x.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/physmap.h>
+#include <linux/regulator/max1586.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include "generic.h"
#include "devices.h"
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long balloon3_pin_config[] __initdata = {
+ /* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* Reset, configured as GPIO wakeup source */
+ GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+
+ /* LEDs */
+ GPIO9_GPIO, /* NAND activity LED */
+ GPIO10_GPIO, /* Heartbeat LED */
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+ GPIO113_AC97_nRESET,
+ GPIO95_GPIO,
+
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+
+ /* USB Host */
+ GPIO88_USBH1_PWR,
+ GPIO89_USBH1_PEN,
+
+ /* PC Card */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO85_nPCE_1,
+ GPIO54_nPCE_2,
+ GPIO79_PSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+};
+
+/******************************************************************************
+ * Compatibility: Parameter parsing
+ ******************************************************************************/
static unsigned long balloon3_irq_enabled;
static unsigned long balloon3_features_present =
}
early_param("balloon3_features", parse_balloon3_features);
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition balloon3_nor_partitions[] = {
+ {
+ .name = "Flash",
+ .offset = 0x00000000,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct physmap_flash_data balloon3_flash_data[] = {
+ {
+ .width = 2, /* bankwidth in bytes */
+ .parts = balloon3_nor_partitions,
+ .nr_parts = ARRAY_SIZE(balloon3_nor_partitions)
+ }
+};
+
+static struct resource balloon3_flash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device balloon3_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .resource = &balloon3_flash_resource,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = balloon3_flash_data,
+ },
+};
+static void __init balloon3_nor_init(void)
+{
+ platform_device_register(&balloon3_flash);
+}
+#else
+static inline void balloon3_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * Audio and Touchscreen
+ ******************************************************************************/
+#if defined(CONFIG_TOUCHSCREEN_UCB1400) || \
+ defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static struct ucb1400_pdata vpac270_ucb1400_pdata = {
+ .irq = IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ),
+};
+
+
+static struct platform_device balloon3_ucb1400_device = {
+ .name = "ucb1400_core",
+ .id = -1,
+ .dev = {
+ .platform_data = &vpac270_ucb1400_pdata,
+ },
+};
+
+static void __init balloon3_ts_init(void)
+{
+ if (!balloon3_has(BALLOON3_FEATURE_AUDIO))
+ return;
+
+ pxa_set_ac97_info(NULL);
+ platform_device_register(&balloon3_ucb1400_device);
+}
+#else
+static inline void balloon3_ts_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info balloon3_lcd_modes[] = {
+ {
+ .pixclock = 38000,
+ .xres = 480,
+ .yres = 640,
+ .bpp = 16,
+ .hsync_len = 8,
+ .left_margin = 8,
+ .right_margin = 8,
+ .vsync_len = 2,
+ .upper_margin = 4,
+ .lower_margin = 5,
+ .sync = 0,
+ },
+};
+
+static struct pxafb_mach_info balloon3_lcd_screen = {
+ .modes = balloon3_lcd_modes,
+ .num_modes = ARRAY_SIZE(balloon3_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void balloon3_backlight_power(int on)
+{
+ gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
+}
+
+static void __init balloon3_lcd_init(void)
+{
+ int ret;
+
+ if (!balloon3_has(BALLOON3_FEATURE_TOPPOLY))
+ return;
+
+ ret = gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT, "BKL-ON");
+ if (ret) {
+ pr_err("Requesting BKL-ON GPIO failed!\n");
+ goto err;
+ }
+
+ ret = gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1);
+ if (ret) {
+ pr_err("Setting BKL-ON GPIO direction failed!\n");
+ goto err2;
+ }
+
+ balloon3_lcd_screen.pxafb_backlight_power = balloon3_backlight_power;
+ set_pxa_fb_info(&balloon3_lcd_screen);
+ return;
+
+err2:
+ gpio_free(BALLOON3_GPIO_RUN_BACKLIGHT);
+err:
+ return;
+}
+#else
+static inline void balloon3_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data balloon3_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
+ .detect_delay_ms = 200,
+};
+
+static void __init balloon3_mmc_init(void)
+{
+ pxa_set_mci_info(&balloon3_mci_platform_data);
+}
+#else
+static inline void balloon3_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Gadget
+ ******************************************************************************/
+#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+static void balloon3_udc_command(int cmd)
+{
+ if (cmd == PXA2XX_UDC_CMD_CONNECT)
+ UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE;
+ else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
+ UP2OCR &= ~UP2OCR_DPPUE;
+}
+
+static int balloon3_udc_is_connected(void)
+{
+ return 1;
+}
+
+static struct pxa2xx_udc_mach_info balloon3_udc_info __initdata = {
+ .udc_command = balloon3_udc_command,
+ .udc_is_connected = balloon3_udc_is_connected,
+ .gpio_pullup = -1,
+};
+
+static void __init balloon3_udc_init(void)
+{
+ pxa_set_udc_info(&balloon3_udc_info);
+ platform_device_register(&balloon3_gpio_vbus);
+}
+#else
+static inline void balloon3_udc_init(void) {}
+#endif
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
+static struct pxaficp_platform_data balloon3_ficp_platform_data = {
+ .transceiver_cap = IR_FIRMODE | IR_SIRMODE | IR_OFF,
+};
+
+static void __init balloon3_irda_init(void)
+{
+ pxa_set_ficp_info(&balloon3_ficp_platform_data);
+}
+#else
+static inline void balloon3_irda_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct pxaohci_platform_data balloon3_ohci_info = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static void __init balloon3_uhc_init(void)
+{
+ if (!balloon3_has(BALLOON3_FEATURE_OHCI))
+ return;
+ pxa_set_ohci_info(&balloon3_ohci_info);
+}
+#else
+static inline void balloon3_uhc_init(void) {}
+#endif
+
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+struct gpio_led balloon3_gpio_leds[] = {
+ {
+ .name = "balloon3:green:idle",
+ .default_trigger = "heartbeat",
+ .gpio = BALLOON3_GPIO_LED_IDLE,
+ .active_low = 1,
+ }, {
+ .name = "balloon3:green:nand",
+ .default_trigger = "nand-disk",
+ .gpio = BALLOON3_GPIO_LED_NAND,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data balloon3_gpio_led_info = {
+ .leds = balloon3_gpio_leds,
+ .num_leds = ARRAY_SIZE(balloon3_gpio_leds),
+};
+
+static struct platform_device balloon3_leds = {
+ .name = "leds-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &balloon3_gpio_led_info,
+ }
+};
+
+struct gpio_led balloon3_pcf_gpio_leds[] = {
+ {
+ .name = "balloon3:green:led0",
+ .gpio = BALLOON3_PCF_GPIO_LED0,
+ .active_low = 1,
+ }, {
+ .name = "balloon3:green:led1",
+ .gpio = BALLOON3_PCF_GPIO_LED1,
+ .active_low = 1,
+ }, {
+ .name = "balloon3:orange:led2",
+ .gpio = BALLOON3_PCF_GPIO_LED2,
+ .active_low = 1,
+ }, {
+ .name = "balloon3:orange:led3",
+ .gpio = BALLOON3_PCF_GPIO_LED3,
+ .active_low = 1,
+ }, {
+ .name = "balloon3:orange:led4",
+ .gpio = BALLOON3_PCF_GPIO_LED4,
+ .active_low = 1,
+ }, {
+ .name = "balloon3:orange:led5",
+ .gpio = BALLOON3_PCF_GPIO_LED5,
+ .active_low = 1,
+ }, {
+ .name = "balloon3:red:led6",
+ .gpio = BALLOON3_PCF_GPIO_LED6,
+ .active_low = 1,
+ }, {
+ .name = "balloon3:red:led7",
+ .gpio = BALLOON3_PCF_GPIO_LED7,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data balloon3_pcf_gpio_led_info = {
+ .leds = balloon3_pcf_gpio_leds,
+ .num_leds = ARRAY_SIZE(balloon3_pcf_gpio_leds),
+};
+
+static struct platform_device balloon3_pcf_leds = {
+ .name = "leds-gpio",
+ .id = 1,
+ .dev = {
+ .platform_data = &balloon3_pcf_gpio_led_info,
+ }
+};
+
+static void __init balloon3_leds_init(void)
+{
+ platform_device_register(&balloon3_leds);
+ platform_device_register(&balloon3_pcf_leds);
+}
+#else
+static inline void balloon3_leds_init(void) {}
+#endif
+
+/******************************************************************************
+ * FPGA IRQ
+ ******************************************************************************/
static void balloon3_mask_irq(unsigned int irq)
{
int balloon3_irq = (irq - BALLOON3_IRQ(0));
{
unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
balloon3_irq_enabled;
-
do {
/* clear useless edge notification */
if (desc->chip->ack)
"enabled\n", __func__, BALLOON3_AUX_NIRQ);
}
-static unsigned long balloon3_ac97_pin_config[] = {
- GPIO28_AC97_BITCLK,
- GPIO29_AC97_SDATA_IN_0,
- GPIO30_AC97_SDATA_OUT,
- GPIO31_AC97_SYNC,
- GPIO113_AC97_nRESET,
-};
-
-static void balloon3_backlight_power(int on)
-{
- pr_debug("%s: power is %s\n", __func__, on ? "on" : "off");
- gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
-}
-
-static unsigned long balloon3_lcd_pin_config[] = {
- /* LCD - 16bpp Active TFT */
- GPIOxx_LCD_TFT_16BPP,
-
- GPIO99_GPIO, /* Backlight */
+/******************************************************************************
+ * GPIO expander
+ ******************************************************************************/
+#if defined(CONFIG_GPIO_PCF857X) || defined(CONFIG_GPIO_PCF857X_MODULE)
+static struct pcf857x_platform_data balloon3_pcf857x_pdata = {
+ .gpio_base = BALLOON3_PCF_GPIO_BASE,
+ .n_latch = 0,
+ .setup = NULL,
+ .teardown = NULL,
+ .context = NULL,
};
-static struct pxafb_mode_info balloon3_lcd_modes[] = {
+static struct i2c_board_info __initdata balloon3_i2c_devs[] = {
{
- .pixclock = 38000,
- .xres = 480,
- .yres = 640,
- .bpp = 16,
- .hsync_len = 8,
- .left_margin = 8,
- .right_margin = 8,
- .vsync_len = 2,
- .upper_margin = 4,
- .lower_margin = 5,
- .sync = 0,
+ I2C_BOARD_INFO("pcf8574a", 0x38),
+ .platform_data = &balloon3_pcf857x_pdata,
},
};
-static struct pxafb_mach_info balloon3_pxafb_info = {
- .modes = balloon3_lcd_modes,
- .num_modes = ARRAY_SIZE(balloon3_lcd_modes),
- .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
- .pxafb_backlight_power = balloon3_backlight_power,
-};
+static void __init balloon3_i2c_init(void)
+{
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(balloon3_i2c_devs));
+}
+#else
+static inline void balloon3_i2c_init(void) {}
+#endif
+
+/******************************************************************************
+ * NAND
+ ******************************************************************************/
+#if defined(CONFIG_MTD_NAND_PLATFORM)||defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+static uint16_t balloon3_ctl =
+ BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
+ BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 |
+ BALLOON3_NAND_CONTROL_FLWP;
+
+static void balloon3_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
-static unsigned long balloon3_mmc_pin_config[] = {
- GPIO32_MMC_CLK,
- GPIO92_MMC_DAT_0,
- GPIO109_MMC_DAT_1,
- GPIO110_MMC_DAT_2,
- GPIO111_MMC_DAT_3,
- GPIO112_MMC_CMD,
-};
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if (ctrl & NAND_CLE)
+ balloon3_ctl |= BALLOON3_NAND_CONTROL_FLCLE;
+ else
+ balloon3_ctl &= ~BALLOON3_NAND_CONTROL_FLCLE;
-static void balloon3_mci_setpower(struct device *dev, unsigned int vdd)
-{
- struct pxamci_platform_data *p_d = dev->platform_data;
-
- if ((1 << vdd) & p_d->ocr_mask) {
- pr_debug("%s: on\n", __func__);
- /* FIXME something to prod here? */
- } else {
- pr_debug("%s: off\n", __func__);
- /* FIXME something to prod here? */
+ if (ctrl & NAND_ALE)
+ balloon3_ctl |= BALLOON3_NAND_CONTROL_FLALE;
+ else
+ balloon3_ctl &= ~BALLOON3_NAND_CONTROL_FLALE;
+
+ __raw_writel(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
}
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, this->IO_ADDR_W);
}
-static struct pxamci_platform_data balloon3_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .setpower = balloon3_mci_setpower,
-};
+static void balloon3_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+ if (chip < 0 || chip > 3)
+ return;
-static int balloon3_udc_is_connected(void)
+ balloon3_ctl |= BALLOON3_NAND_CONTROL_FLCE0 |
+ BALLOON3_NAND_CONTROL_FLCE1 |
+ BALLOON3_NAND_CONTROL_FLCE2 |
+ BALLOON3_NAND_CONTROL_FLCE3;
+
+ /* Deassert correct nCE line */
+ balloon3_ctl &= ~(BALLOON3_NAND_CONTROL_FLCE0 << chip);
+
+ __raw_writew(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
+}
+
+static int balloon3_nand_probe(struct platform_device *pdev)
{
- pr_debug("%s: udc connected\n", __func__);
- return 1;
+ void __iomem *temp_map;
+ uint16_t ver;
+ int ret;
+
+ __raw_writew(BALLOON3_NAND_CONTROL2_16BIT, BALLOON3_NAND_CONTROL2_REG);
+
+ ver = __raw_readw(BALLOON3_FPGA_VER);
+ if (ver > 0x0201)
+ pr_warn("The FPGA code, version 0x%04x, is newer than rel-0.3. "
+ "NAND support might be broken in this version!", ver);
+
+ /* Power up the NAND chips */
+ ret = gpio_request(BALLOON3_GPIO_RUN_NAND, "NAND");
+ if (ret)
+ goto err1;
+
+ ret = gpio_direction_output(BALLOON3_GPIO_RUN_NAND, 1);
+ if (ret)
+ goto err2;
+
+ gpio_set_value(BALLOON3_GPIO_RUN_NAND, 1);
+
+ /* Deassert all nCE lines and write protect line */
+ __raw_writel(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
+ return 0;
+
+err2:
+ gpio_free(BALLOON3_GPIO_RUN_NAND);
+err1:
+ return ret;
}
-static void balloon3_udc_command(int cmd)
+static void balloon3_nand_remove(struct platform_device *pdev)
{
- switch (cmd) {
- case PXA2XX_UDC_CMD_CONNECT:
- UP2OCR |= (UP2OCR_DPPUE + UP2OCR_DPPUBE);
- pr_debug("%s: connect\n", __func__);
- break;
- case PXA2XX_UDC_CMD_DISCONNECT:
- UP2OCR &= ~UP2OCR_DPPUE;
- pr_debug("%s: disconnect\n", __func__);
- break;
- }
+ /* Power down the NAND chips */
+ gpio_set_value(BALLOON3_GPIO_RUN_NAND, 0);
+ gpio_free(BALLOON3_GPIO_RUN_NAND);
}
-static struct pxa2xx_udc_mach_info balloon3_udc_info = {
- .udc_is_connected = balloon3_udc_is_connected,
- .udc_command = balloon3_udc_command,
+static struct mtd_partition balloon3_partition_info[] = {
+ [0] = {
+ .name = "Boot",
+ .offset = 0,
+ .size = SZ_4M,
+ },
+ [1] = {
+ .name = "RootFS",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL
+ },
};
-static struct pxaficp_platform_data balloon3_ficp_platform_data = {
- .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
-};
+static const char *balloon3_part_probes[] = { "cmdlinepart", NULL };
-static unsigned long balloon3_ohci_pin_config[] = {
- GPIO88_USBH1_PWR,
- GPIO89_USBH1_PEN,
+struct platform_nand_data balloon3_nand_pdata = {
+ .chip = {
+ .nr_chips = 4,
+ .chip_offset = 0,
+ .nr_partitions = ARRAY_SIZE(balloon3_partition_info),
+ .partitions = balloon3_partition_info,
+ .chip_delay = 50,
+ .part_probe_types = balloon3_part_probes,
+ },
+ .ctrl = {
+ .hwcontrol = 0,
+ .dev_ready = 0,
+ .select_chip = balloon3_nand_select_chip,
+ .cmd_ctrl = balloon3_nand_cmd_ctl,
+ .probe = balloon3_nand_probe,
+ .remove = balloon3_nand_remove,
+ },
};
-static struct pxaohci_platform_data balloon3_ohci_platform_data = {
- .port_mode = PMM_PERPORT_MODE,
- .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+static struct resource balloon3_nand_resource[] = {
+ [0] = {
+ .start = BALLOON3_NAND_BASE,
+ .end = BALLOON3_NAND_BASE + 0x4,
+ .flags = IORESOURCE_MEM,
+ },
};
-static unsigned long balloon3_pin_config[] __initdata = {
- /* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
- GPIO42_BTUART_RXD,
- GPIO43_BTUART_TXD,
- GPIO44_BTUART_CTS,
- GPIO45_BTUART_RTS,
-
- /* Wakeup GPIO */
- GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
-
- /* NAND & IDLE LED GPIOs */
- GPIO9_GPIO,
- GPIO10_GPIO,
+static struct platform_device balloon3_nand = {
+ .name = "gen_nand",
+ .num_resources = ARRAY_SIZE(balloon3_nand_resource),
+ .resource = balloon3_nand_resource,
+ .id = -1,
+ .dev = {
+ .platform_data = &balloon3_nand_pdata,
+ }
};
-static struct gpio_led balloon3_gpio_leds[] = {
+static void __init balloon3_nand_init(void)
+{
+ platform_device_register(&balloon3_nand);
+}
+#else
+static inline void balloon3_nand_init(void) {}
+#endif
+
+/******************************************************************************
+ * Core power regulator
+ ******************************************************************************/
+#if defined(CONFIG_REGULATOR_MAX1586) || \
+ defined(CONFIG_REGULATOR_MAX1586_MODULE)
+static struct regulator_consumer_supply balloon3_max1587a_consumers[] = {
{
- .name = "balloon3:green:idle",
- .default_trigger = "heartbeat",
- .gpio = BALLOON3_GPIO_LED_IDLE,
- .active_low = 1,
+ .supply = "vcc_core",
+ }
+};
+
+static struct regulator_init_data balloon3_max1587a_v3_info = {
+ .constraints = {
+ .name = "vcc_core range",
+ .min_uV = 900000,
+ .max_uV = 1705000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
},
+ .consumer_supplies = balloon3_max1587a_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(balloon3_max1587a_consumers),
+};
+
+static struct max1586_subdev_data balloon3_max1587a_subdevs[] = {
{
- .name = "balloon3:green:nand",
- .default_trigger = "nand-disk",
- .gpio = BALLOON3_GPIO_LED_NAND,
- .active_low = 1,
- },
+ .name = "vcc_core",
+ .id = MAX1586_V3,
+ .platform_data = &balloon3_max1587a_v3_info,
+ }
};
-static struct gpio_led_platform_data balloon3_gpio_leds_platform_data = {
- .leds = balloon3_gpio_leds,
- .num_leds = ARRAY_SIZE(balloon3_gpio_leds),
+static struct max1586_platform_data balloon3_max1587a_info = {
+ .subdevs = balloon3_max1587a_subdevs,
+ .num_subdevs = ARRAY_SIZE(balloon3_max1587a_subdevs),
+ .v3_gain = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
};
-static struct platform_device balloon3led_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &balloon3_gpio_leds_platform_data,
+static struct i2c_board_info __initdata balloon3_pi2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("max1586", 0x14),
+ .platform_data = &balloon3_max1587a_info,
},
};
-static void __init balloon3_init(void)
+static void __init balloon3_pmic_init(void)
{
- pr_info("Initialising Balloon3\n");
+ pxa27x_set_i2c_power_info(NULL);
+ i2c_register_board_info(1, ARRAY_AND_SIZE(balloon3_pi2c_board_info));
+}
+#else
+static inline void balloon3_pmic_init(void) {}
+#endif
- /* system bus arbiter setting
- * - Core_Park
- * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
- */
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static void __init balloon3_init(void)
+{
ARB_CNTRL = ARB_CORE_PARK | 0x234;
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config));
+
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
- pxa_set_i2c_info(NULL);
- if (balloon3_has(BALLOON3_FEATURE_AUDIO)) {
- pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ac97_pin_config));
- pxa_set_ac97_info(NULL);
- }
-
- if (balloon3_has(BALLOON3_FEATURE_TOPPOLY)) {
- pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
- gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT,
- "LCD Backlight Power");
- gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1);
- set_pxa_fb_info(&balloon3_pxafb_info);
- }
-
- if (balloon3_has(BALLOON3_FEATURE_MMC)) {
- pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config));
- pxa_set_mci_info(&balloon3_mci_platform_data);
- }
- pxa_set_ficp_info(&balloon3_ficp_platform_data);
- if (balloon3_has(BALLOON3_FEATURE_OHCI)) {
- pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ohci_pin_config));
- pxa_set_ohci_info(&balloon3_ohci_platform_data);
- }
- pxa_set_udc_info(&balloon3_udc_info);
-
- pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config));
-
- platform_device_register(&balloon3led_device);
+ balloon3_i2c_init();
+ balloon3_irda_init();
+ balloon3_lcd_init();
+ balloon3_leds_init();
+ balloon3_mmc_init();
+ balloon3_nand_init();
+ balloon3_nor_init();
+ balloon3_pmic_init();
+ balloon3_ts_init();
+ balloon3_udc_init();
+ balloon3_uhc_init();
}
static struct map_desc balloon3_io_desc[] __initdata = {
{
pxa3xx_set_i2c_power_info(&cm_x300_pwr_i2c_info);
i2c_register_board_info(1, &cm_x300_pmic_info, 1);
+ set_irq_wake(IRQ_WAKEUP0, 1);
}
static void __init cm_x300_init_wi2wi(void)
{
cm_x300_init_mfp();
- pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
+ if (cpu_is_pxa300())
+ pxa_set_ffuart_info(NULL);
cm_x300_init_da9030();
cm_x300_init_dm9000();
--- /dev/null
+/*
+ * linux/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
+ *
+ * Support for Toradex PXA270 based Colibri Evaluation Carrier Board
+ * Daniel Mack <daniel@caiaq.de>
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa27x.h>
+#include <mach/colibri.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x-udc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO0_GPIO, /* SD detect */
+
+ /* FFUART */
+ GPIO39_FFUART_TXD,
+ GPIO34_FFUART_RXD,
+
+ /* UHC */
+ GPIO88_USBH1_PWR,
+ GPIO89_USBH1_PEN,
+ GPIO119_USBH2_PWR,
+ GPIO120_USBH2_PEN,
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data colibri_pxa270_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_power = -1,
+ .gpio_card_detect = GPIO0_COLIBRI_PXA270_SD_DETECT,
+ .gpio_card_ro = -1,
+ .detect_delay_ms = 200,
+};
+
+static void __init colibri_pxa270_mmc_init(void)
+{
+ pxa_set_mci_info(&colibri_pxa270_mci_platform_data);
+}
+#else
+static inline void colibri_pxa270_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static int colibri_pxa270_ohci_init(struct device *dev)
+{
+ UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
+ return 0;
+}
+
+static struct pxaohci_platform_data colibri_pxa270_ohci_info = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT1 | ENABLE_PORT2 |
+ POWER_CONTROL_LOW | POWER_SENSE_LOW,
+ .init = colibri_pxa270_ohci_init,
+};
+
+static void __init colibri_pxa270_uhc_init(void)
+{
+ pxa_set_ohci_info(&colibri_pxa270_ohci_info);
+}
+#else
+static inline void colibri_pxa270_uhc_init(void) {}
+#endif
+
+void __init colibri_pxa270_evalboard_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_evalboard_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ colibri_pxa270_mmc_init();
+ colibri_pxa270_uhc_init();
+}
+
--- /dev/null
+/*
+ * linux/arch/arm/mach-pxa/income.c
+ *
+ * Support for Income s.r.o. SH-Dmaster PXA270 SBC
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <marek.vasut@gmail.com>
+ * Pavel Revak <palo@bielyvlk.sk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/pwm_backlight.h>
+#include <linux/sysdev.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/hardware.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/pxafb.h>
+
+#include <plat/i2c.h>
+
+#include "devices.h"
+#include "generic.h"
+
+#define GPIO114_INCOME_ETH_IRQ (114)
+#define GPIO0_INCOME_SD_DETECT (0)
+#define GPIO0_INCOME_SD_RO (1)
+#define GPIO54_INCOME_LED_A (54)
+#define GPIO55_INCOME_LED_B (55)
+#define GPIO113_INCOME_TS_IRQ (113)
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static mfp_cfg_t income_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO0_GPIO, /* SD detect */
+ GPIO1_GPIO, /* SD read-only */
+
+ /* FFUART */
+ GPIO39_FFUART_TXD,
+ GPIO34_FFUART_RXD,
+
+ /* BFUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO45_BTUART_RTS,
+
+ /* STUART */
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+
+ /* UHC */
+ GPIO88_USBH1_PWR,
+ GPIO89_USBH1_PEN,
+
+ /* LCD */
+ GPIOxx_LCD_TFT_16BPP,
+
+ /* PWM */
+ GPIO16_PWM0_OUT,
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* LED */
+ GPIO54_GPIO, /* LED A */
+ GPIO55_GPIO, /* LED B */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data income_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_power = -1,
+ .gpio_card_detect = GPIO0_INCOME_SD_DETECT,
+ .gpio_card_ro = GPIO0_INCOME_SD_RO,
+ .detect_delay_ms = 200,
+};
+
+static void __init income_mmc_init(void)
+{
+ pxa_set_mci_info(&income_mci_platform_data);
+}
+#else
+static inline void income_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct pxaohci_platform_data income_ohci_info = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static void __init income_uhc_init(void)
+{
+ pxa_set_ohci_info(&income_ohci_info);
+}
+#else
+static inline void income_uhc_init(void) {}
+#endif
+
+/******************************************************************************
+ * LED
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+struct gpio_led income_gpio_leds[] = {
+ {
+ .name = "income:green:leda",
+ .default_trigger = "none",
+ .gpio = GPIO54_INCOME_LED_A,
+ .active_low = 1,
+ },
+ {
+ .name = "income:green:ledb",
+ .default_trigger = "none",
+ .gpio = GPIO55_INCOME_LED_B,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_led_platform_data income_gpio_led_info = {
+ .leds = income_gpio_leds,
+ .num_leds = ARRAY_SIZE(income_gpio_leds),
+};
+
+static struct platform_device income_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &income_gpio_led_info,
+ }
+};
+
+static void __init income_led_init(void)
+{
+ platform_device_register(&income_leds);
+}
+#else
+static inline void income_led_init(void) {}
+#endif
+
+/******************************************************************************
+ * I2C
+ ******************************************************************************/
+#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct i2c_board_info __initdata income_i2c_devs[] = {
+ {
+ I2C_BOARD_INFO("ds1340", 0x68),
+ }, {
+ I2C_BOARD_INFO("lm75", 0x4f),
+ },
+};
+
+static void __init income_i2c_init(void)
+{
+ pxa_set_i2c_info(NULL);
+ pxa27x_set_i2c_power_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(income_i2c_devs));
+}
+#else
+static inline void income_i2c_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info income_lcd_modes[] = {
+{
+ .pixclock = 144700,
+ .xres = 320,
+ .yres = 240,
+ .bpp = 32,
+ .depth = 18,
+
+ .left_margin = 10,
+ .right_margin = 10,
+ .upper_margin = 7,
+ .lower_margin = 8,
+
+ .hsync_len = 20,
+ .vsync_len = 2,
+
+ .sync = FB_SYNC_VERT_HIGH_ACT,
+},
+};
+
+static struct pxafb_mach_info income_lcd_screen = {
+ .modes = income_lcd_modes,
+ .num_modes = ARRAY_SIZE(income_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_18BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void __init income_lcd_init(void)
+{
+ set_pxa_fb_info(&income_lcd_screen);
+}
+#else
+static inline void income_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM__MODULE)
+static struct platform_pwm_backlight_data income_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = 0x3ff,
+ .dft_brightness = 0x1ff,
+ .pwm_period_ns = 1000000,
+};
+
+static struct platform_device income_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &income_backlight_data,
+ },
+};
+
+static void __init income_pwm_init(void)
+{
+ platform_device_register(&income_backlight);
+}
+#else
+static inline void income_pwm_init(void) {}
+#endif
+
+void __init colibri_pxa270_income_boardinit(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ income_mmc_init();
+ income_uhc_init();
+ income_led_init();
+ income_i2c_init();
+ income_lcd_init();
+ income_pwm_init();
+}
+
*
* Support for Toradex PXA270 based Colibri module
* Daniel Mack <daniel@caiaq.de>
+ * Marek Vasut <marek.vasut@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
*/
#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/sysdev.h>
#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
+#include <linux/kernel.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/sizes.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/ucb1400.h>
+
#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
+#include <asm/mach-types.h>
+#include <asm/sizes.h>
-#include <mach/pxa27x.h>
+#include <mach/audio.h>
#include <mach/colibri.h>
+#include <mach/pxa27x.h>
-#include "generic.h"
#include "devices.h"
+#include "generic.h"
-/*
- * GPIO configuration
- */
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
+ /* Ethernet */
GPIO78_nCS_2, /* Ethernet CS */
GPIO114_GPIO, /* Ethernet IRQ */
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+ GPIO95_AC97_nRESET,
+ GPIO98_AC97_SYSCLK,
+ GPIO113_GPIO, /* Touchscreen IRQ */
};
-/*
- * NOR flash
- */
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
static struct mtd_partition colibri_partitions[] = {
{
.name = "Bootloader",
.offset = 0x00000000,
.size = 0x00040000,
- .mask_flags = MTD_WRITEABLE /* force read-only */
+ .mask_flags = MTD_WRITEABLE /* force read-only */
}, {
.name = "Kernel",
.offset = 0x00040000,
.num_resources = 1,
};
-/*
- * DM9000 Ethernet
- */
-#if defined(CONFIG_DM9000)
-static struct resource dm9000_resources[] = {
- [0] = {
- .start = COLIBRI_PXA270_ETH_PHYS,
- .end = COLIBRI_PXA270_ETH_PHYS + 3,
+static void __init colibri_pxa270_nor_init(void)
+{
+ platform_device_register(&colibri_pxa270_flash_device);
+}
+#else
+static inline void colibri_pxa270_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * Ethernet
+ ******************************************************************************/
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource colibri_pxa270_dm9000_resources[] = {
+ {
+ .start = PXA_CS2_PHYS,
+ .end = PXA_CS2_PHYS + 3,
.flags = IORESOURCE_MEM,
},
- [1] = {
- .start = COLIBRI_PXA270_ETH_PHYS + 4,
- .end = COLIBRI_PXA270_ETH_PHYS + 4 + 500,
+ {
+ .start = PXA_CS2_PHYS + 4,
+ .end = PXA_CS2_PHYS + 4 + 500,
.flags = IORESOURCE_MEM,
},
- [2] = {
- .start = COLIBRI_PXA270_ETH_IRQ,
- .end = COLIBRI_PXA270_ETH_IRQ,
+ {
+ .start = gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
+ .end = gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
},
};
-static struct platform_device dm9000_device = {
+static struct platform_device colibri_pxa270_dm9000_device = {
.name = "dm9000",
.id = -1,
- .num_resources = ARRAY_SIZE(dm9000_resources),
- .resource = dm9000_resources,
+ .num_resources = ARRAY_SIZE(colibri_pxa270_dm9000_resources),
+ .resource = colibri_pxa270_dm9000_resources,
};
-#endif /* CONFIG_DM9000 */
-static struct platform_device *colibri_pxa270_devices[] __initdata = {
- &colibri_pxa270_flash_device,
-#if defined(CONFIG_DM9000)
- &dm9000_device,
+static void __init colibri_pxa270_eth_init(void)
+{
+ platform_device_register(&colibri_pxa270_dm9000_device);
+}
+#else
+static inline void colibri_pxa270_eth_init(void) {}
#endif
+
+/******************************************************************************
+ * Audio and Touchscreen
+ ******************************************************************************/
+#if defined(CONFIG_TOUCHSCREEN_UCB1400) || \
+ defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static pxa2xx_audio_ops_t colibri_pxa270_ac97_pdata = {
+ .reset_gpio = 95,
+};
+
+static struct ucb1400_pdata colibri_pxa270_ucb1400_pdata = {
+ .irq = gpio_to_irq(GPIO113_COLIBRI_PXA270_TS_IRQ),
+};
+
+static struct platform_device colibri_pxa270_ucb1400_device = {
+ .name = "ucb1400_core",
+ .id = -1,
+ .dev = {
+ .platform_data = &colibri_pxa270_ucb1400_pdata,
+ },
};
+static void __init colibri_pxa270_tsc_init(void)
+{
+ pxa_set_ac97_info(&colibri_pxa270_ac97_pdata);
+ platform_device_register(&colibri_pxa270_ucb1400_device);
+}
+#else
+static inline void colibri_pxa270_tsc_init(void) {}
+#endif
+
+static int colibri_pxa270_baseboard;
+core_param(colibri_pxa270_baseboard, colibri_pxa270_baseboard, int, 0444);
+
static void __init colibri_pxa270_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
- pxa_set_ffuart_info(NULL);
- pxa_set_btuart_info(NULL);
- pxa_set_stuart_info(NULL);
- platform_add_devices(ARRAY_AND_SIZE(colibri_pxa270_devices));
+
+ colibri_pxa270_nor_init();
+ colibri_pxa270_eth_init();
+ colibri_pxa270_tsc_init();
+
+ switch (colibri_pxa270_baseboard) {
+ case COLIBRI_PXA270_EVALBOARD:
+ colibri_pxa270_evalboard_init();
+ break;
+ case COLIBRI_PXA270_INCOME:
+ colibri_pxa270_income_boardinit();
+ break;
+ default:
+ printk(KERN_ERR "Illegal colibri_pxa270_baseboard type %d\n",
+ colibri_pxa270_baseboard);
+ }
+}
+
+/* The "Income s.r.o. SH-Dmaster PXA270 SBC" board can be booted either
+ * with the INCOME mach type or with COLIBRI and the kernel parameter
+ * "colibri_pxa270_baseboard=1"
+ */
+static void __init colibri_pxa270_income_init(void)
+{
+ colibri_pxa270_baseboard = COLIBRI_PXA270_INCOME;
+ colibri_pxa270_init();
}
MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
.timer = &pxa_timer,
MACHINE_END
+MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .init_machine = colibri_pxa270_income_init,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+MACHINE_END
+
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
+#include <linux/usb/gpio_vbus.h>
#include <asm/mach-types.h>
#include <asm/sizes.h>
#include <mach/pxafb.h>
#include <mach/ohci.h>
#include <mach/audio.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/udc.h>
#include "generic.h"
#include "devices.h"
static inline void colibri_pxa320_init_ohci(void) {}
#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
+#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+static struct gpio_vbus_mach_info colibri_pxa320_gpio_vbus_info = {
+ .gpio_vbus = mfp_to_gpio(MFP_PIN_GPIO96),
+ .gpio_pullup = -1,
+};
+
+static struct platform_device colibri_pxa320_gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &colibri_pxa320_gpio_vbus_info,
+ },
+};
+
+static void colibri_pxa320_udc_command(int cmd)
+{
+ if (cmd == PXA2XX_UDC_CMD_CONNECT)
+ UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
+ else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
+ UP2OCR = UP2OCR_HXOE;
+}
+
+static struct pxa2xx_udc_mach_info colibri_pxa320_udc_info __initdata = {
+ .udc_command = colibri_pxa320_udc_command,
+ .gpio_pullup = -1,
+};
+
+static void __init colibri_pxa320_init_udc(void)
+{
+ pxa_set_udc_info(&colibri_pxa320_udc_info);
+ platform_device_register(&colibri_pxa320_gpio_vbus);
+}
+#else
+static inline void colibri_pxa320_init_udc(void) {}
+#endif
+
static mfp_cfg_t colibri_pxa320_mmc_pin_config[] __initdata = {
GPIO22_MMC1_CLK,
GPIO23_MMC1_CMD,
colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa320_mmc_pin_config),
mfp_to_gpio(MFP_PIN_GPIO28));
colibri_pxa320_init_uart();
+ colibri_pxa320_init_udc();
}
MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
#include <mach/udc.h>
#include <mach/pxa2xx_spi.h>
#include <mach/corgi.h>
-#include <mach/sharpsl.h>
+#include <mach/sharpsl_pm.h>
#include <asm/mach/sharpsl_param.h>
#include <asm/hardware/scoop.h>
#include "generic.h"
#include "devices.h"
-#include "sharpsl.h"
static unsigned long corgi_pin_config[] __initdata = {
/* Static Memory I/O */
.num_devs = 1,
};
-EXPORT_SYMBOL(corgiscoop_device);
-
static struct w100_mem_info corgi_fb_mem = {
.ext_cntl = 0x00040003,
.sdram_mode_reg = 0x00650021,
#include <asm/mach-types.h>
#include <mach/hardware.h>
-#include <mach/sharpsl.h>
#include <mach/corgi.h>
#include <mach/pxa2xx-regs.h>
+#include <mach/sharpsl_pm.h>
#include "generic.h"
-#include "sharpsl.h"
#define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */
#define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */
case SHARPSL_STATUS_ACIN:
return ((GPLR(CORGI_GPIO_AC_IN) & GPIO_bit(CORGI_GPIO_AC_IN)) != 0);
case SHARPSL_STATUS_LOCK:
- return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock);
+ return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock);
case SHARPSL_STATUS_CHRGFULL:
- return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull);
+ return gpio_get_value(sharpsl_pm.machinfo->gpio_batfull);
case SHARPSL_STATUS_FATAL:
- return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal);
+ return gpio_get_value(sharpsl_pm.machinfo->gpio_fatal);
case SHARPSL_ACIN_VOLT:
return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT);
case SHARPSL_BATT_TEMP:
.should_wakeup = corgi_should_wakeup,
#if defined(CONFIG_LCD_CORGI)
.backlight_limit = corgi_lcd_limit_intensity,
-#elif defined(CONFIG_BACKLIGHT_CORGI)
- .backlight_limit = corgibl_limit_intensity,
#endif
.charge_on_volt = SHARPSL_CHARGE_ON_VOLT,
.charge_on_temp = SHARPSL_CHARGE_ON_TEMP,
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <asm/pmu.h>
#include <mach/udc.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
dev_err(&dev->dev, "unable to register device: %d\n", ret);
}
+static struct resource pxa_resource_pmu = {
+ .start = IRQ_PMU,
+ .end = IRQ_PMU,
+ .flags = IORESOURCE_IRQ,
+};
+
+struct platform_device pxa_device_pmu = {
+ .name = "arm-pmu",
+ .id = ARM_PMU_DEVICE_CPU,
+ .resource = &pxa_resource_pmu,
+ .num_resources = 1,
+};
+
static struct resource pxamci_resources[] = {
[0] = {
.start = 0x41100000,
+extern struct platform_device pxa_device_pmu;
extern struct platform_device pxa_device_mci;
extern struct platform_device pxa3xx_device_mci2;
extern struct platform_device pxa3xx_device_mci3;
+++ /dev/null
-/*
- * Hardware definitions for the Toshiba e330 PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/tc6387xb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/udc.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-
-/* -------------------- e330 tc6387xb parameters -------------------- */
-
-static struct tc6387xb_platform_data e330_tc6387xb_info = {
- .enable = &eseries_tmio_enable,
- .disable = &eseries_tmio_disable,
- .suspend = &eseries_tmio_suspend,
- .resume = &eseries_tmio_resume,
-};
-
-static struct platform_device e330_tc6387xb_device = {
- .name = "tc6387xb",
- .id = -1,
- .dev = {
- .platform_data = &e330_tc6387xb_info,
- },
- .num_resources = 2,
- .resource = eseries_tmio_resources,
-};
-
-/* --------------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
- &e330_tc6387xb_device,
-};
-
-static void __init e330_init(void)
-{
- pxa_set_ffuart_info(NULL);
- pxa_set_btuart_info(NULL);
- pxa_set_stuart_info(NULL);
- eseries_register_clks();
- eseries_get_tmio_gpios();
- platform_add_devices(devices, ARRAY_SIZE(devices));
- pxa_set_udc_info(&e7xx_udc_mach_info);
-}
-
-MACHINE_START(E330, "Toshiba e330")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .init_machine = e330_init,
- .timer = &pxa_timer,
-MACHINE_END
-
+++ /dev/null
-/*
- * Hardware definitions for the Toshiba e350 PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/t7l66xb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/irqs.h>
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/udc.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-
-/* -------------------- e350 t7l66xb parameters -------------------- */
-
-static struct t7l66xb_platform_data e350_t7l66xb_info = {
- .irq_base = IRQ_BOARD_START,
- .enable = &eseries_tmio_enable,
- .suspend = &eseries_tmio_suspend,
- .resume = &eseries_tmio_resume,
-};
-
-static struct platform_device e350_t7l66xb_device = {
- .name = "t7l66xb",
- .id = -1,
- .dev = {
- .platform_data = &e350_t7l66xb_info,
- },
- .num_resources = 2,
- .resource = eseries_tmio_resources,
-};
-
-/* ---------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
- &e350_t7l66xb_device,
-};
-
-static void __init e350_init(void)
-{
- pxa_set_ffuart_info(NULL);
- pxa_set_btuart_info(NULL);
- pxa_set_stuart_info(NULL);
- eseries_register_clks();
- eseries_get_tmio_gpios();
- platform_add_devices(devices, ARRAY_SIZE(devices));
- pxa_set_udc_info(&e7xx_udc_mach_info);
-}
-
-MACHINE_START(E350, "Toshiba e350")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .init_machine = e350_init,
- .timer = &pxa_timer,
-MACHINE_END
-
+++ /dev/null
-/*
- * Hardware definitions for the Toshiba eseries PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/t7l66xb.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/pxafb.h>
-#include <mach/udc.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-
-/* ------------------------ E400 LCD definitions ------------------------ */
-
-static struct pxafb_mode_info e400_pxafb_mode_info = {
- .pixclock = 140703,
- .xres = 240,
- .yres = 320,
- .bpp = 16,
- .hsync_len = 4,
- .left_margin = 28,
- .right_margin = 8,
- .vsync_len = 3,
- .upper_margin = 5,
- .lower_margin = 6,
- .sync = 0,
-};
-
-static struct pxafb_mach_info e400_pxafb_mach_info = {
- .modes = &e400_pxafb_mode_info,
- .num_modes = 1,
- .lcd_conn = LCD_COLOR_TFT_16BPP,
- .lccr3 = 0,
- .pxafb_backlight_power = NULL,
-};
-
-/* ------------------------ E400 MFP config ----------------------------- */
-
-static unsigned long e400_pin_config[] __initdata = {
- /* Chip selects */
- GPIO15_nCS_1, /* CS1 - Flash */
- GPIO80_nCS_4, /* CS4 - TMIO */
-
- /* Clocks */
- GPIO12_32KHz,
-
- /* BTUART */
- GPIO42_BTUART_RXD,
- GPIO43_BTUART_TXD,
- GPIO44_BTUART_CTS,
-
- /* TMIO controller */
- GPIO19_GPIO, /* t7l66xb #PCLR */
- GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
- /* wakeup */
- GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* ---------------------------------------------------------------------- */
-
-static struct mtd_partition partition_a = {
- .name = "Internal NAND flash",
- .offset = 0,
- .size = MTDPART_SIZ_FULL,
-};
-
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr e400_t7l66xb_nand_bbt = {
- .options = 0,
- .offs = 4,
- .len = 2,
- .pattern = scan_ff_pattern
-};
-
-static struct tmio_nand_data e400_t7l66xb_nand_config = {
- .num_partitions = 1,
- .partition = &partition_a,
- .badblock_pattern = &e400_t7l66xb_nand_bbt,
-};
-
-static struct t7l66xb_platform_data e400_t7l66xb_info = {
- .irq_base = IRQ_BOARD_START,
- .enable = &eseries_tmio_enable,
- .suspend = &eseries_tmio_suspend,
- .resume = &eseries_tmio_resume,
-
- .nand_data = &e400_t7l66xb_nand_config,
-};
-
-static struct platform_device e400_t7l66xb_device = {
- .name = "t7l66xb",
- .id = -1,
- .dev = {
- .platform_data = &e400_t7l66xb_info,
- },
- .num_resources = 2,
- .resource = eseries_tmio_resources,
-};
-
-/* ---------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
- &e400_t7l66xb_device,
-};
-
-static void __init e400_init(void)
-{
- pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
- pxa_set_ffuart_info(NULL);
- pxa_set_btuart_info(NULL);
- pxa_set_stuart_info(NULL);
- /* Fixme - e400 may have a switched clock */
- eseries_register_clks();
- eseries_get_tmio_gpios();
- set_pxa_fb_info(&e400_pxafb_mach_info);
- platform_add_devices(devices, ARRAY_SIZE(devices));
- pxa_set_udc_info(&e7xx_udc_mach_info);
-}
-
-MACHINE_START(E400, "Toshiba e400")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .init_machine = e400_init,
- .timer = &pxa_timer,
-MACHINE_END
-
+++ /dev/null
-/*
- * Hardware definitions for the Toshiba eseries PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/clk.h>
-#include <linux/mfd/t7l66xb.h>
-
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/udc.h>
-#include <mach/irda.h>
-#include <mach/irqs.h>
-#include <mach/audio.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-#include "devices.h"
-
-/* ------------------------ e740 video support --------------------------- */
-
-static struct w100_gen_regs e740_lcd_regs = {
- .lcd_format = 0x00008023,
- .lcdd_cntl1 = 0x0f000000,
- .lcdd_cntl2 = 0x0003ffff,
- .genlcd_cntl1 = 0x00ffff03,
- .genlcd_cntl2 = 0x003c0f03,
- .genlcd_cntl3 = 0x000143aa,
-};
-
-static struct w100_mode e740_lcd_mode = {
- .xres = 240,
- .yres = 320,
- .left_margin = 20,
- .right_margin = 28,
- .upper_margin = 9,
- .lower_margin = 8,
- .crtc_ss = 0x80140013,
- .crtc_ls = 0x81150110,
- .crtc_gs = 0x80050005,
- .crtc_vpos_gs = 0x000a0009,
- .crtc_rev = 0x0040010a,
- .crtc_dclk = 0xa906000a,
- .crtc_gclk = 0x80050108,
- .crtc_goe = 0x80050108,
- .pll_freq = 57,
- .pixclk_divider = 4,
- .pixclk_divider_rotated = 4,
- .pixclk_src = CLK_SRC_XTAL,
- .sysclk_divider = 1,
- .sysclk_src = CLK_SRC_PLL,
- .crtc_ps1_active = 0x41060010,
-};
-
-static struct w100_gpio_regs e740_w100_gpio_info = {
- .init_data1 = 0x21002103,
- .gpio_dir1 = 0xffffdeff,
- .gpio_oe1 = 0x03c00643,
- .init_data2 = 0x003f003f,
- .gpio_dir2 = 0xffffffff,
- .gpio_oe2 = 0x000000ff,
-};
-
-static struct w100fb_mach_info e740_fb_info = {
- .modelist = &e740_lcd_mode,
- .num_modes = 1,
- .regs = &e740_lcd_regs,
- .gpio = &e740_w100_gpio_info,
- .xtal_freq = 14318000,
- .xtal_dbl = 1,
-};
-
-static struct resource e740_fb_resources[] = {
- [0] = {
- .start = 0x0c000000,
- .end = 0x0cffffff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device e740_fb_device = {
- .name = "w100fb",
- .id = -1,
- .dev = {
- .platform_data = &e740_fb_info,
- },
- .num_resources = ARRAY_SIZE(e740_fb_resources),
- .resource = e740_fb_resources,
-};
-
-/* --------------------------- MFP Pin config -------------------------- */
-
-static unsigned long e740_pin_config[] __initdata = {
- /* Chip selects */
- GPIO15_nCS_1, /* CS1 - Flash */
- GPIO79_nCS_3, /* CS3 - IMAGEON */
- GPIO80_nCS_4, /* CS4 - TMIO */
-
- /* Clocks */
- GPIO12_32KHz,
-
- /* BTUART */
- GPIO42_BTUART_RXD,
- GPIO43_BTUART_TXD,
- GPIO44_BTUART_CTS,
-
- /* TMIO controller */
- GPIO19_GPIO, /* t7l66xb #PCLR */
- GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
- /* UDC */
- GPIO13_GPIO,
- GPIO3_GPIO,
-
- /* IrDA */
- GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
-
- /* AC97 */
- GPIO28_AC97_BITCLK,
- GPIO29_AC97_SDATA_IN_0,
- GPIO30_AC97_SDATA_OUT,
- GPIO31_AC97_SYNC,
-
- /* Audio power control */
- GPIO16_GPIO, /* AC97 codec AVDD2 supply (analogue power) */
- GPIO40_GPIO, /* Mic amp power */
- GPIO41_GPIO, /* Headphone amp power */
-
- /* PC Card */
- GPIO8_GPIO, /* CD0 */
- GPIO44_GPIO, /* CD1 */
- GPIO11_GPIO, /* IRQ0 */
- GPIO6_GPIO, /* IRQ1 */
- GPIO27_GPIO, /* RST0 */
- GPIO24_GPIO, /* RST1 */
- GPIO20_GPIO, /* PWR0 */
- GPIO23_GPIO, /* PWR1 */
- GPIO48_nPOE,
- GPIO49_nPWE,
- GPIO50_nPIOR,
- GPIO51_nPIOW,
- GPIO52_nPCE_1,
- GPIO53_nPCE_2,
- GPIO54_nPSKTSEL,
- GPIO55_nPREG,
- GPIO56_nPWAIT,
- GPIO57_nIOIS16,
-
- /* wakeup */
- GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* -------------------- e740 t7l66xb parameters -------------------- */
-
-static struct t7l66xb_platform_data e740_t7l66xb_info = {
- .irq_base = IRQ_BOARD_START,
- .enable = &eseries_tmio_enable,
- .suspend = &eseries_tmio_suspend,
- .resume = &eseries_tmio_resume,
-};
-
-static struct platform_device e740_t7l66xb_device = {
- .name = "t7l66xb",
- .id = -1,
- .dev = {
- .platform_data = &e740_t7l66xb_info,
- },
- .num_resources = 2,
- .resource = eseries_tmio_resources,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
- &e740_fb_device,
- &e740_t7l66xb_device,
-};
-
-static void __init e740_init(void)
-{
- pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
- pxa_set_ffuart_info(NULL);
- pxa_set_btuart_info(NULL);
- pxa_set_stuart_info(NULL);
- eseries_register_clks();
- clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
- "UDCCLK", &pxa25x_device_udc.dev),
- eseries_get_tmio_gpios();
- platform_add_devices(devices, ARRAY_SIZE(devices));
- pxa_set_udc_info(&e7xx_udc_mach_info);
- pxa_set_ac97_info(NULL);
- pxa_set_ficp_info(&e7xx_ficp_platform_data);
-}
-
-MACHINE_START(E740, "Toshiba e740")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .init_machine = e740_init,
- .timer = &pxa_timer,
-MACHINE_END
-
+++ /dev/null
-/*
- * Hardware definitions for the Toshiba eseries PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/mfd/tc6393xb.h>
-
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/udc.h>
-#include <mach/irda.h>
-#include <mach/irqs.h>
-#include <mach/audio.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-
-/* ---------------------- E750 LCD definitions -------------------- */
-
-static struct w100_gen_regs e750_lcd_regs = {
- .lcd_format = 0x00008003,
- .lcdd_cntl1 = 0x00000000,
- .lcdd_cntl2 = 0x0003ffff,
- .genlcd_cntl1 = 0x00fff003,
- .genlcd_cntl2 = 0x003c0f03,
- .genlcd_cntl3 = 0x000143aa,
-};
-
-static struct w100_mode e750_lcd_mode = {
- .xres = 240,
- .yres = 320,
- .left_margin = 21,
- .right_margin = 22,
- .upper_margin = 5,
- .lower_margin = 4,
- .crtc_ss = 0x80150014,
- .crtc_ls = 0x8014000d,
- .crtc_gs = 0xc1000005,
- .crtc_vpos_gs = 0x00020147,
- .crtc_rev = 0x0040010a,
- .crtc_dclk = 0xa1700030,
- .crtc_gclk = 0x80cc0015,
- .crtc_goe = 0x80cc0015,
- .crtc_ps1_active = 0x61060017,
- .pll_freq = 57,
- .pixclk_divider = 4,
- .pixclk_divider_rotated = 4,
- .pixclk_src = CLK_SRC_XTAL,
- .sysclk_divider = 1,
- .sysclk_src = CLK_SRC_PLL,
-};
-
-static struct w100_gpio_regs e750_w100_gpio_info = {
- .init_data1 = 0x01192f1b,
- .gpio_dir1 = 0xd5ffdeff,
- .gpio_oe1 = 0x000020bf,
- .init_data2 = 0x010f010f,
- .gpio_dir2 = 0xffffffff,
- .gpio_oe2 = 0x000001cf,
-};
-
-static struct w100fb_mach_info e750_fb_info = {
- .modelist = &e750_lcd_mode,
- .num_modes = 1,
- .regs = &e750_lcd_regs,
- .gpio = &e750_w100_gpio_info,
- .xtal_freq = 14318000,
- .xtal_dbl = 1,
-};
-
-static struct resource e750_fb_resources[] = {
- [0] = {
- .start = 0x0c000000,
- .end = 0x0cffffff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device e750_fb_device = {
- .name = "w100fb",
- .id = -1,
- .dev = {
- .platform_data = &e750_fb_info,
- },
- .num_resources = ARRAY_SIZE(e750_fb_resources),
- .resource = e750_fb_resources,
-};
-
-/* -------------------- e750 MFP parameters -------------------- */
-
-static unsigned long e750_pin_config[] __initdata = {
- /* Chip selects */
- GPIO15_nCS_1, /* CS1 - Flash */
- GPIO79_nCS_3, /* CS3 - IMAGEON */
- GPIO80_nCS_4, /* CS4 - TMIO */
-
- /* Clocks */
- GPIO11_3_6MHz,
-
- /* BTUART */
- GPIO42_BTUART_RXD,
- GPIO43_BTUART_TXD,
- GPIO44_BTUART_CTS,
-
- /* TMIO controller */
- GPIO19_GPIO, /* t7l66xb #PCLR */
- GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
- /* UDC */
- GPIO13_GPIO,
- GPIO3_GPIO,
-
- /* IrDA */
- GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
-
- /* AC97 */
- GPIO28_AC97_BITCLK,
- GPIO29_AC97_SDATA_IN_0,
- GPIO30_AC97_SDATA_OUT,
- GPIO31_AC97_SYNC,
-
- /* Audio power control */
- GPIO4_GPIO, /* Headphone amp power */
- GPIO7_GPIO, /* Speaker amp power */
- GPIO37_GPIO, /* Headphone detect */
-
- /* PC Card */
- GPIO8_GPIO, /* CD0 */
- GPIO44_GPIO, /* CD1 */
- GPIO11_GPIO, /* IRQ0 */
- GPIO6_GPIO, /* IRQ1 */
- GPIO27_GPIO, /* RST0 */
- GPIO24_GPIO, /* RST1 */
- GPIO20_GPIO, /* PWR0 */
- GPIO23_GPIO, /* PWR1 */
- GPIO48_nPOE,
- GPIO49_nPWE,
- GPIO50_nPIOR,
- GPIO51_nPIOW,
- GPIO52_nPCE_1,
- GPIO53_nPCE_2,
- GPIO54_nPSKTSEL,
- GPIO55_nPREG,
- GPIO56_nPWAIT,
- GPIO57_nIOIS16,
-
- /* wakeup */
- GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* ----------------- e750 tc6393xb parameters ------------------ */
-
-static struct tc6393xb_platform_data e750_tc6393xb_info = {
- .irq_base = IRQ_BOARD_START,
- .scr_pll2cr = 0x0cc1,
- .scr_gper = 0,
- .gpio_base = -1,
- .suspend = &eseries_tmio_suspend,
- .resume = &eseries_tmio_resume,
- .enable = &eseries_tmio_enable,
- .disable = &eseries_tmio_disable,
-};
-
-static struct platform_device e750_tc6393xb_device = {
- .name = "tc6393xb",
- .id = -1,
- .dev = {
- .platform_data = &e750_tc6393xb_info,
- },
- .num_resources = 2,
- .resource = eseries_tmio_resources,
-};
-
-/* ------------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
- &e750_fb_device,
- &e750_tc6393xb_device,
-};
-
-static void __init e750_init(void)
-{
- pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
- pxa_set_ffuart_info(NULL);
- pxa_set_btuart_info(NULL);
- pxa_set_stuart_info(NULL);
- clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
- "GPIO11_CLK", NULL),
- eseries_get_tmio_gpios();
- platform_add_devices(devices, ARRAY_SIZE(devices));
- pxa_set_udc_info(&e7xx_udc_mach_info);
- pxa_set_ac97_info(NULL);
- pxa_set_ficp_info(&e7xx_ficp_platform_data);
-}
-
-MACHINE_START(E750, "Toshiba e750")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .init_machine = e750_init,
- .timer = &pxa_timer,
-MACHINE_END
-
+++ /dev/null
-/*
- * Hardware definitions for the Toshiba eseries PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/mfd/tc6393xb.h>
-
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/udc.h>
-#include <mach/irqs.h>
-#include <mach/audio.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-
-/* ------------------------ e800 LCD definitions ------------------------- */
-
-static unsigned long e800_pin_config[] __initdata = {
- /* AC97 */
- GPIO28_AC97_BITCLK,
- GPIO29_AC97_SDATA_IN_0,
- GPIO30_AC97_SDATA_OUT,
- GPIO31_AC97_SYNC,
-};
-
-static struct w100_gen_regs e800_lcd_regs = {
- .lcd_format = 0x00008003,
- .lcdd_cntl1 = 0x02a00000,
- .lcdd_cntl2 = 0x0003ffff,
- .genlcd_cntl1 = 0x000ff2a3,
- .genlcd_cntl2 = 0x000002a3,
- .genlcd_cntl3 = 0x000102aa,
-};
-
-static struct w100_mode e800_lcd_mode[2] = {
- [0] = {
- .xres = 480,
- .yres = 640,
- .left_margin = 52,
- .right_margin = 148,
- .upper_margin = 2,
- .lower_margin = 6,
- .crtc_ss = 0x80350034,
- .crtc_ls = 0x802b0026,
- .crtc_gs = 0x80160016,
- .crtc_vpos_gs = 0x00020003,
- .crtc_rev = 0x0040001d,
- .crtc_dclk = 0xe0000000,
- .crtc_gclk = 0x82a50049,
- .crtc_goe = 0x80ee001c,
- .crtc_ps1_active = 0x00000000,
- .pll_freq = 128,
- .pixclk_divider = 4,
- .pixclk_divider_rotated = 6,
- .pixclk_src = CLK_SRC_PLL,
- .sysclk_divider = 0,
- .sysclk_src = CLK_SRC_PLL,
- },
- [1] = {
- .xres = 240,
- .yres = 320,
- .left_margin = 15,
- .right_margin = 88,
- .upper_margin = 0,
- .lower_margin = 7,
- .crtc_ss = 0xd010000f,
- .crtc_ls = 0x80070003,
- .crtc_gs = 0x80000000,
- .crtc_vpos_gs = 0x01460147,
- .crtc_rev = 0x00400003,
- .crtc_dclk = 0xa1700030,
- .crtc_gclk = 0x814b0008,
- .crtc_goe = 0x80cc0015,
- .crtc_ps1_active = 0x00000000,
- .pll_freq = 100,
- .pixclk_divider = 6, /* Wince uses 14 which gives a */
- .pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
- .pixclk_src = CLK_SRC_PLL,
- .sysclk_divider = 0,
- .sysclk_src = CLK_SRC_PLL,
- }
-};
-
-
-static struct w100_gpio_regs e800_w100_gpio_info = {
- .init_data1 = 0xc13fc019,
- .gpio_dir1 = 0x3e40df7f,
- .gpio_oe1 = 0x003c3000,
- .init_data2 = 0x00000000,
- .gpio_dir2 = 0x00000000,
- .gpio_oe2 = 0x00000000,
-};
-
-static struct w100_mem_info e800_w100_mem_info = {
- .ext_cntl = 0x09640011,
- .sdram_mode_reg = 0x00600021,
- .ext_timing_cntl = 0x10001545,
- .io_cntl = 0x7ddd7333,
- .size = 0x1fffff,
-};
-
-static void e800_tg_change(struct w100fb_par *par)
-{
- unsigned long tmp;
-
- tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
- if (par->mode->xres == 480)
- tmp |= 0x100;
- else
- tmp &= ~0x100;
- w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
-}
-
-static struct w100_tg_info e800_tg_info = {
- .change = e800_tg_change,
-};
-
-static struct w100fb_mach_info e800_fb_info = {
- .modelist = e800_lcd_mode,
- .num_modes = 2,
- .regs = &e800_lcd_regs,
- .gpio = &e800_w100_gpio_info,
- .mem = &e800_w100_mem_info,
- .tg = &e800_tg_info,
- .xtal_freq = 16000000,
-};
-
-static struct resource e800_fb_resources[] = {
- [0] = {
- .start = 0x0c000000,
- .end = 0x0cffffff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device e800_fb_device = {
- .name = "w100fb",
- .id = -1,
- .dev = {
- .platform_data = &e800_fb_info,
- },
- .num_resources = ARRAY_SIZE(e800_fb_resources),
- .resource = e800_fb_resources,
-};
-
-/* --------------------------- UDC definitions --------------------------- */
-
-static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
- .gpio_vbus = GPIO_E800_USB_DISC,
- .gpio_pullup = GPIO_E800_USB_PULLUP,
- .gpio_pullup_inverted = 1
-};
-
-/* ----------------- e800 tc6393xb parameters ------------------ */
-
-static struct tc6393xb_platform_data e800_tc6393xb_info = {
- .irq_base = IRQ_BOARD_START,
- .scr_pll2cr = 0x0cc1,
- .scr_gper = 0,
- .gpio_base = -1,
- .suspend = &eseries_tmio_suspend,
- .resume = &eseries_tmio_resume,
- .enable = &eseries_tmio_enable,
- .disable = &eseries_tmio_disable,
-};
-
-static struct platform_device e800_tc6393xb_device = {
- .name = "tc6393xb",
- .id = -1,
- .dev = {
- .platform_data = &e800_tc6393xb_info,
- },
- .num_resources = 2,
- .resource = eseries_tmio_resources,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
- &e800_fb_device,
- &e800_tc6393xb_device,
-};
-
-static void __init e800_init(void)
-{
- pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
- pxa_set_ffuart_info(NULL);
- pxa_set_btuart_info(NULL);
- pxa_set_stuart_info(NULL);
- clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
- "GPIO11_CLK", NULL),
- eseries_get_tmio_gpios();
- platform_add_devices(devices, ARRAY_SIZE(devices));
- pxa_set_udc_info(&e800_udc_mach_info);
- pxa_set_ac97_info(NULL);
-}
-
-MACHINE_START(E800, "Toshiba e800")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .init_machine = e800_init,
- .timer = &pxa_timer,
-MACHINE_END
-
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
+#include <linux/mfd/tc6387xb.h>
+#include <linux/mfd/tc6393xb.h>
+#include <linux/mfd/t7l66xb.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include <video/w100fb.h>
#include <asm/setup.h>
#include <asm/mach/arch.h>
#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
#include <mach/udc.h>
#include <mach/irda.h>
+#include "devices.h"
#include "generic.h"
#include "clock.h"
clkdev_add_table(eseries_clkregs, ARRAY_SIZE(eseries_clkregs));
}
+#ifdef CONFIG_MACH_E330
+/* -------------------- e330 tc6387xb parameters -------------------- */
+
+static struct tc6387xb_platform_data e330_tc6387xb_info = {
+ .enable = &eseries_tmio_enable,
+ .disable = &eseries_tmio_disable,
+ .suspend = &eseries_tmio_suspend,
+ .resume = &eseries_tmio_resume,
+};
+
+static struct platform_device e330_tc6387xb_device = {
+ .name = "tc6387xb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e330_tc6387xb_info,
+ },
+ .num_resources = 2,
+ .resource = eseries_tmio_resources,
+};
+
+/* --------------------------------------------------------------- */
+
+static struct platform_device *e330_devices[] __initdata = {
+ &e330_tc6387xb_device,
+};
+
+static void __init e330_init(void)
+{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ eseries_register_clks();
+ eseries_get_tmio_gpios();
+ platform_add_devices(ARRAY_AND_SIZE(e330_devices));
+ pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E330, "Toshiba e330")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e330_init,
+ .timer = &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E350
+/* -------------------- e350 t7l66xb parameters -------------------- */
+
+static struct t7l66xb_platform_data e350_t7l66xb_info = {
+ .irq_base = IRQ_BOARD_START,
+ .enable = &eseries_tmio_enable,
+ .suspend = &eseries_tmio_suspend,
+ .resume = &eseries_tmio_resume,
+};
+
+static struct platform_device e350_t7l66xb_device = {
+ .name = "t7l66xb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e350_t7l66xb_info,
+ },
+ .num_resources = 2,
+ .resource = eseries_tmio_resources,
+};
+
+/* ---------------------------------------------------------- */
+
+static struct platform_device *e350_devices[] __initdata = {
+ &e350_t7l66xb_device,
+};
+
+static void __init e350_init(void)
+{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ eseries_register_clks();
+ eseries_get_tmio_gpios();
+ platform_add_devices(ARRAY_AND_SIZE(e350_devices));
+ pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E350, "Toshiba e350")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e350_init,
+ .timer = &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E400
+/* ------------------------ E400 LCD definitions ------------------------ */
+
+static struct pxafb_mode_info e400_pxafb_mode_info = {
+ .pixclock = 140703,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .hsync_len = 4,
+ .left_margin = 28,
+ .right_margin = 8,
+ .vsync_len = 3,
+ .upper_margin = 5,
+ .lower_margin = 6,
+ .sync = 0,
+};
+
+static struct pxafb_mach_info e400_pxafb_mach_info = {
+ .modes = &e400_pxafb_mode_info,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP,
+ .lccr3 = 0,
+ .pxafb_backlight_power = NULL,
+};
+
+/* ------------------------ E400 MFP config ----------------------------- */
+
+static unsigned long e400_pin_config[] __initdata = {
+ /* Chip selects */
+ GPIO15_nCS_1, /* CS1 - Flash */
+ GPIO80_nCS_4, /* CS4 - TMIO */
+
+ /* Clocks */
+ GPIO12_32KHz,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+
+ /* TMIO controller */
+ GPIO19_GPIO, /* t7l66xb #PCLR */
+ GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
+
+ /* wakeup */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* ---------------------------------------------------------------------- */
+
+static struct mtd_partition partition_a = {
+ .name = "Internal NAND flash",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL,
+};
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr e400_t7l66xb_nand_bbt = {
+ .options = 0,
+ .offs = 4,
+ .len = 2,
+ .pattern = scan_ff_pattern
+};
+
+static struct tmio_nand_data e400_t7l66xb_nand_config = {
+ .num_partitions = 1,
+ .partition = &partition_a,
+ .badblock_pattern = &e400_t7l66xb_nand_bbt,
+};
+
+static struct t7l66xb_platform_data e400_t7l66xb_info = {
+ .irq_base = IRQ_BOARD_START,
+ .enable = &eseries_tmio_enable,
+ .suspend = &eseries_tmio_suspend,
+ .resume = &eseries_tmio_resume,
+
+ .nand_data = &e400_t7l66xb_nand_config,
+};
+
+static struct platform_device e400_t7l66xb_device = {
+ .name = "t7l66xb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e400_t7l66xb_info,
+ },
+ .num_resources = 2,
+ .resource = eseries_tmio_resources,
+};
+
+/* ---------------------------------------------------------- */
+
+static struct platform_device *e400_devices[] __initdata = {
+ &e400_t7l66xb_device,
+};
+
+static void __init e400_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ /* Fixme - e400 may have a switched clock */
+ eseries_register_clks();
+ eseries_get_tmio_gpios();
+ set_pxa_fb_info(&e400_pxafb_mach_info);
+ platform_add_devices(ARRAY_AND_SIZE(e400_devices));
+ pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E400, "Toshiba e400")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e400_init,
+ .timer = &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E740
+/* ------------------------ e740 video support --------------------------- */
+
+static struct w100_gen_regs e740_lcd_regs = {
+ .lcd_format = 0x00008023,
+ .lcdd_cntl1 = 0x0f000000,
+ .lcdd_cntl2 = 0x0003ffff,
+ .genlcd_cntl1 = 0x00ffff03,
+ .genlcd_cntl2 = 0x003c0f03,
+ .genlcd_cntl3 = 0x000143aa,
+};
+
+static struct w100_mode e740_lcd_mode = {
+ .xres = 240,
+ .yres = 320,
+ .left_margin = 20,
+ .right_margin = 28,
+ .upper_margin = 9,
+ .lower_margin = 8,
+ .crtc_ss = 0x80140013,
+ .crtc_ls = 0x81150110,
+ .crtc_gs = 0x80050005,
+ .crtc_vpos_gs = 0x000a0009,
+ .crtc_rev = 0x0040010a,
+ .crtc_dclk = 0xa906000a,
+ .crtc_gclk = 0x80050108,
+ .crtc_goe = 0x80050108,
+ .pll_freq = 57,
+ .pixclk_divider = 4,
+ .pixclk_divider_rotated = 4,
+ .pixclk_src = CLK_SRC_XTAL,
+ .sysclk_divider = 1,
+ .sysclk_src = CLK_SRC_PLL,
+ .crtc_ps1_active = 0x41060010,
+};
+
+static struct w100_gpio_regs e740_w100_gpio_info = {
+ .init_data1 = 0x21002103,
+ .gpio_dir1 = 0xffffdeff,
+ .gpio_oe1 = 0x03c00643,
+ .init_data2 = 0x003f003f,
+ .gpio_dir2 = 0xffffffff,
+ .gpio_oe2 = 0x000000ff,
+};
+
+static struct w100fb_mach_info e740_fb_info = {
+ .modelist = &e740_lcd_mode,
+ .num_modes = 1,
+ .regs = &e740_lcd_regs,
+ .gpio = &e740_w100_gpio_info,
+ .xtal_freq = 14318000,
+ .xtal_dbl = 1,
+};
+
+static struct resource e740_fb_resources[] = {
+ [0] = {
+ .start = 0x0c000000,
+ .end = 0x0cffffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device e740_fb_device = {
+ .name = "w100fb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e740_fb_info,
+ },
+ .num_resources = ARRAY_SIZE(e740_fb_resources),
+ .resource = e740_fb_resources,
+};
+
+/* --------------------------- MFP Pin config -------------------------- */
+
+static unsigned long e740_pin_config[] __initdata = {
+ /* Chip selects */
+ GPIO15_nCS_1, /* CS1 - Flash */
+ GPIO79_nCS_3, /* CS3 - IMAGEON */
+ GPIO80_nCS_4, /* CS4 - TMIO */
+
+ /* Clocks */
+ GPIO12_32KHz,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+
+ /* TMIO controller */
+ GPIO19_GPIO, /* t7l66xb #PCLR */
+ GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
+
+ /* UDC */
+ GPIO13_GPIO,
+ GPIO3_GPIO,
+
+ /* IrDA */
+ GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
+ /* Audio power control */
+ GPIO16_GPIO, /* AC97 codec AVDD2 supply (analogue power) */
+ GPIO40_GPIO, /* Mic amp power */
+ GPIO41_GPIO, /* Headphone amp power */
+
+ /* PC Card */
+ GPIO8_GPIO, /* CD0 */
+ GPIO44_GPIO, /* CD1 */
+ GPIO11_GPIO, /* IRQ0 */
+ GPIO6_GPIO, /* IRQ1 */
+ GPIO27_GPIO, /* RST0 */
+ GPIO24_GPIO, /* RST1 */
+ GPIO20_GPIO, /* PWR0 */
+ GPIO23_GPIO, /* PWR1 */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO52_nPCE_1,
+ GPIO53_nPCE_2,
+ GPIO54_nPSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+
+ /* wakeup */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* -------------------- e740 t7l66xb parameters -------------------- */
+
+static struct t7l66xb_platform_data e740_t7l66xb_info = {
+ .irq_base = IRQ_BOARD_START,
+ .enable = &eseries_tmio_enable,
+ .suspend = &eseries_tmio_suspend,
+ .resume = &eseries_tmio_resume,
+};
+
+static struct platform_device e740_t7l66xb_device = {
+ .name = "t7l66xb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e740_t7l66xb_info,
+ },
+ .num_resources = 2,
+ .resource = eseries_tmio_resources,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *e740_devices[] __initdata = {
+ &e740_fb_device,
+ &e740_t7l66xb_device,
+};
+
+static void __init e740_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ eseries_register_clks();
+ clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
+ "UDCCLK", &pxa25x_device_udc.dev),
+ eseries_get_tmio_gpios();
+ platform_add_devices(ARRAY_AND_SIZE(e740_devices));
+ pxa_set_udc_info(&e7xx_udc_mach_info);
+ pxa_set_ac97_info(NULL);
+ pxa_set_ficp_info(&e7xx_ficp_platform_data);
+}
+
+MACHINE_START(E740, "Toshiba e740")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e740_init,
+ .timer = &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E750
+/* ---------------------- E750 LCD definitions -------------------- */
+
+static struct w100_gen_regs e750_lcd_regs = {
+ .lcd_format = 0x00008003,
+ .lcdd_cntl1 = 0x00000000,
+ .lcdd_cntl2 = 0x0003ffff,
+ .genlcd_cntl1 = 0x00fff003,
+ .genlcd_cntl2 = 0x003c0f03,
+ .genlcd_cntl3 = 0x000143aa,
+};
+
+static struct w100_mode e750_lcd_mode = {
+ .xres = 240,
+ .yres = 320,
+ .left_margin = 21,
+ .right_margin = 22,
+ .upper_margin = 5,
+ .lower_margin = 4,
+ .crtc_ss = 0x80150014,
+ .crtc_ls = 0x8014000d,
+ .crtc_gs = 0xc1000005,
+ .crtc_vpos_gs = 0x00020147,
+ .crtc_rev = 0x0040010a,
+ .crtc_dclk = 0xa1700030,
+ .crtc_gclk = 0x80cc0015,
+ .crtc_goe = 0x80cc0015,
+ .crtc_ps1_active = 0x61060017,
+ .pll_freq = 57,
+ .pixclk_divider = 4,
+ .pixclk_divider_rotated = 4,
+ .pixclk_src = CLK_SRC_XTAL,
+ .sysclk_divider = 1,
+ .sysclk_src = CLK_SRC_PLL,
+};
+
+static struct w100_gpio_regs e750_w100_gpio_info = {
+ .init_data1 = 0x01192f1b,
+ .gpio_dir1 = 0xd5ffdeff,
+ .gpio_oe1 = 0x000020bf,
+ .init_data2 = 0x010f010f,
+ .gpio_dir2 = 0xffffffff,
+ .gpio_oe2 = 0x000001cf,
+};
+
+static struct w100fb_mach_info e750_fb_info = {
+ .modelist = &e750_lcd_mode,
+ .num_modes = 1,
+ .regs = &e750_lcd_regs,
+ .gpio = &e750_w100_gpio_info,
+ .xtal_freq = 14318000,
+ .xtal_dbl = 1,
+};
+
+static struct resource e750_fb_resources[] = {
+ [0] = {
+ .start = 0x0c000000,
+ .end = 0x0cffffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device e750_fb_device = {
+ .name = "w100fb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e750_fb_info,
+ },
+ .num_resources = ARRAY_SIZE(e750_fb_resources),
+ .resource = e750_fb_resources,
+};
+
+/* -------------------- e750 MFP parameters -------------------- */
+
+static unsigned long e750_pin_config[] __initdata = {
+ /* Chip selects */
+ GPIO15_nCS_1, /* CS1 - Flash */
+ GPIO79_nCS_3, /* CS3 - IMAGEON */
+ GPIO80_nCS_4, /* CS4 - TMIO */
+
+ /* Clocks */
+ GPIO11_3_6MHz,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+
+ /* TMIO controller */
+ GPIO19_GPIO, /* t7l66xb #PCLR */
+ GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
+
+ /* UDC */
+ GPIO13_GPIO,
+ GPIO3_GPIO,
+
+ /* IrDA */
+ GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
+ /* Audio power control */
+ GPIO4_GPIO, /* Headphone amp power */
+ GPIO7_GPIO, /* Speaker amp power */
+ GPIO37_GPIO, /* Headphone detect */
+
+ /* PC Card */
+ GPIO8_GPIO, /* CD0 */
+ GPIO44_GPIO, /* CD1 */
+ GPIO11_GPIO, /* IRQ0 */
+ GPIO6_GPIO, /* IRQ1 */
+ GPIO27_GPIO, /* RST0 */
+ GPIO24_GPIO, /* RST1 */
+ GPIO20_GPIO, /* PWR0 */
+ GPIO23_GPIO, /* PWR1 */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO52_nPCE_1,
+ GPIO53_nPCE_2,
+ GPIO54_nPSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+
+ /* wakeup */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* ----------------- e750 tc6393xb parameters ------------------ */
+
+static struct tc6393xb_platform_data e750_tc6393xb_info = {
+ .irq_base = IRQ_BOARD_START,
+ .scr_pll2cr = 0x0cc1,
+ .scr_gper = 0,
+ .gpio_base = -1,
+ .suspend = &eseries_tmio_suspend,
+ .resume = &eseries_tmio_resume,
+ .enable = &eseries_tmio_enable,
+ .disable = &eseries_tmio_disable,
+};
+
+static struct platform_device e750_tc6393xb_device = {
+ .name = "tc6393xb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e750_tc6393xb_info,
+ },
+ .num_resources = 2,
+ .resource = eseries_tmio_resources,
+};
+
+/* ------------------------------------------------------------- */
+
+static struct platform_device *e750_devices[] __initdata = {
+ &e750_fb_device,
+ &e750_tc6393xb_device,
+};
+
+static void __init e750_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
+ "GPIO11_CLK", NULL),
+ eseries_get_tmio_gpios();
+ platform_add_devices(ARRAY_AND_SIZE(e750_devices));
+ pxa_set_udc_info(&e7xx_udc_mach_info);
+ pxa_set_ac97_info(NULL);
+ pxa_set_ficp_info(&e7xx_ficp_platform_data);
+}
+
+MACHINE_START(E750, "Toshiba e750")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e750_init,
+ .timer = &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E800
+/* ------------------------ e800 LCD definitions ------------------------- */
+
+static unsigned long e800_pin_config[] __initdata = {
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+};
+
+static struct w100_gen_regs e800_lcd_regs = {
+ .lcd_format = 0x00008003,
+ .lcdd_cntl1 = 0x02a00000,
+ .lcdd_cntl2 = 0x0003ffff,
+ .genlcd_cntl1 = 0x000ff2a3,
+ .genlcd_cntl2 = 0x000002a3,
+ .genlcd_cntl3 = 0x000102aa,
+};
+
+static struct w100_mode e800_lcd_mode[2] = {
+ [0] = {
+ .xres = 480,
+ .yres = 640,
+ .left_margin = 52,
+ .right_margin = 148,
+ .upper_margin = 2,
+ .lower_margin = 6,
+ .crtc_ss = 0x80350034,
+ .crtc_ls = 0x802b0026,
+ .crtc_gs = 0x80160016,
+ .crtc_vpos_gs = 0x00020003,
+ .crtc_rev = 0x0040001d,
+ .crtc_dclk = 0xe0000000,
+ .crtc_gclk = 0x82a50049,
+ .crtc_goe = 0x80ee001c,
+ .crtc_ps1_active = 0x00000000,
+ .pll_freq = 128,
+ .pixclk_divider = 4,
+ .pixclk_divider_rotated = 6,
+ .pixclk_src = CLK_SRC_PLL,
+ .sysclk_divider = 0,
+ .sysclk_src = CLK_SRC_PLL,
+ },
+ [1] = {
+ .xres = 240,
+ .yres = 320,
+ .left_margin = 15,
+ .right_margin = 88,
+ .upper_margin = 0,
+ .lower_margin = 7,
+ .crtc_ss = 0xd010000f,
+ .crtc_ls = 0x80070003,
+ .crtc_gs = 0x80000000,
+ .crtc_vpos_gs = 0x01460147,
+ .crtc_rev = 0x00400003,
+ .crtc_dclk = 0xa1700030,
+ .crtc_gclk = 0x814b0008,
+ .crtc_goe = 0x80cc0015,
+ .crtc_ps1_active = 0x00000000,
+ .pll_freq = 100,
+ .pixclk_divider = 6, /* Wince uses 14 which gives a */
+ .pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
+ .pixclk_src = CLK_SRC_PLL,
+ .sysclk_divider = 0,
+ .sysclk_src = CLK_SRC_PLL,
+ }
+};
+
+
+static struct w100_gpio_regs e800_w100_gpio_info = {
+ .init_data1 = 0xc13fc019,
+ .gpio_dir1 = 0x3e40df7f,
+ .gpio_oe1 = 0x003c3000,
+ .init_data2 = 0x00000000,
+ .gpio_dir2 = 0x00000000,
+ .gpio_oe2 = 0x00000000,
+};
+
+static struct w100_mem_info e800_w100_mem_info = {
+ .ext_cntl = 0x09640011,
+ .sdram_mode_reg = 0x00600021,
+ .ext_timing_cntl = 0x10001545,
+ .io_cntl = 0x7ddd7333,
+ .size = 0x1fffff,
+};
+
+static void e800_tg_change(struct w100fb_par *par)
+{
+ unsigned long tmp;
+
+ tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
+ if (par->mode->xres == 480)
+ tmp |= 0x100;
+ else
+ tmp &= ~0x100;
+ w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
+}
+
+static struct w100_tg_info e800_tg_info = {
+ .change = e800_tg_change,
+};
+
+static struct w100fb_mach_info e800_fb_info = {
+ .modelist = e800_lcd_mode,
+ .num_modes = 2,
+ .regs = &e800_lcd_regs,
+ .gpio = &e800_w100_gpio_info,
+ .mem = &e800_w100_mem_info,
+ .tg = &e800_tg_info,
+ .xtal_freq = 16000000,
+};
+
+static struct resource e800_fb_resources[] = {
+ [0] = {
+ .start = 0x0c000000,
+ .end = 0x0cffffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device e800_fb_device = {
+ .name = "w100fb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e800_fb_info,
+ },
+ .num_resources = ARRAY_SIZE(e800_fb_resources),
+ .resource = e800_fb_resources,
+};
+
+/* --------------------------- UDC definitions --------------------------- */
+
+static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
+ .gpio_vbus = GPIO_E800_USB_DISC,
+ .gpio_pullup = GPIO_E800_USB_PULLUP,
+ .gpio_pullup_inverted = 1
+};
+
+/* ----------------- e800 tc6393xb parameters ------------------ */
+
+static struct tc6393xb_platform_data e800_tc6393xb_info = {
+ .irq_base = IRQ_BOARD_START,
+ .scr_pll2cr = 0x0cc1,
+ .scr_gper = 0,
+ .gpio_base = -1,
+ .suspend = &eseries_tmio_suspend,
+ .resume = &eseries_tmio_resume,
+ .enable = &eseries_tmio_enable,
+ .disable = &eseries_tmio_disable,
+};
+
+static struct platform_device e800_tc6393xb_device = {
+ .name = "tc6393xb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e800_tc6393xb_info,
+ },
+ .num_resources = 2,
+ .resource = eseries_tmio_resources,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *e800_devices[] __initdata = {
+ &e800_fb_device,
+ &e800_tc6393xb_device,
+};
+
+static void __init e800_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
+ "GPIO11_CLK", NULL),
+ eseries_get_tmio_gpios();
+ platform_add_devices(ARRAY_AND_SIZE(e800_devices));
+ pxa_set_udc_info(&e800_udc_mach_info);
+ pxa_set_ac97_info(NULL);
+}
+
+MACHINE_START(E800, "Toshiba e800")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e800_init,
+ .timer = &pxa_timer,
+MACHINE_END
+#endif
+++ /dev/null
-/*
- * linux/arch/arm/mach-pxa/imote2.c
- *
- * Author: Ed C. Epp
- * Created: Nov 05, 2002
- * Copyright: Intel Corp.
- *
- * Modified 2008: Jonathan Cameron
- *
- * The Imote2 is a wireless sensor node platform sold
- * by Crossbow (www.xbow.com).
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/machine.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/spi/spi.h>
-#include <linux/i2c.h>
-#include <linux/mfd/da903x.h>
-#include <linux/sht15.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-
-#include <mach/pxa27x.h>
-#include <plat/i2c.h>
-#include <mach/udc.h>
-#include <mach/mmc.h>
-#include <mach/pxa2xx_spi.h>
-#include <mach/pxa27x-udc.h>
-
-#include "devices.h"
-#include "generic.h"
-
-static unsigned long imote2_pin_config[] __initdata = {
-
- /* Device Identification for wakeup*/
- GPIO102_GPIO,
-
- /* Button */
- GPIO91_GPIO,
-
- /* DA9030 */
- GPIO1_GPIO,
-
- /* MMC */
- GPIO32_MMC_CLK,
- GPIO112_MMC_CMD,
- GPIO92_MMC_DAT_0,
- GPIO109_MMC_DAT_1,
- GPIO110_MMC_DAT_2,
- GPIO111_MMC_DAT_3,
-
- /* 802.15.4 radio - driver out of mainline */
- GPIO22_GPIO, /* CC_RSTN */
- GPIO114_GPIO, /* CC_FIFO */
- GPIO116_GPIO, /* CC_CCA */
- GPIO0_GPIO, /* CC_FIFOP */
- GPIO16_GPIO, /* CCSFD */
- GPIO115_GPIO, /* Power enable */
-
- /* I2C */
- GPIO117_I2C_SCL,
- GPIO118_I2C_SDA,
-
- /* SSP 3 - 802.15.4 radio */
- GPIO39_GPIO, /* Chip Select */
- GPIO34_SSP3_SCLK,
- GPIO35_SSP3_TXD,
- GPIO41_SSP3_RXD,
-
- /* SSP 2 - to daughter boards */
- GPIO37_GPIO, /* Chip Select */
- GPIO36_SSP2_SCLK,
- GPIO38_SSP2_TXD,
- GPIO11_SSP2_RXD,
-
- /* SSP 1 - to daughter boards */
- GPIO24_GPIO, /* Chip Select */
- GPIO23_SSP1_SCLK,
- GPIO25_SSP1_TXD,
- GPIO26_SSP1_RXD,
-
- /* BTUART Basic Connector*/
- GPIO42_BTUART_RXD,
- GPIO43_BTUART_TXD,
- GPIO44_BTUART_CTS,
- GPIO45_BTUART_RTS,
-
- /* STUART Serial console via debug board*/
- GPIO46_STUART_RXD,
- GPIO47_STUART_TXD,
-
- /* Basic sensor board */
- GPIO96_GPIO, /* accelerometer interrupt */
- GPIO99_GPIO, /* ADC interrupt */
-
- /* SHT15 */
- GPIO100_GPIO,
- GPIO98_GPIO,
-
- /* Connector pins specified as gpios */
- GPIO94_GPIO, /* large basic connector pin 14 */
- GPIO10_GPIO, /* large basic connector pin 23 */
-
- /* LEDS */
- GPIO103_GPIO, /* red led */
- GPIO104_GPIO, /* green led */
- GPIO105_GPIO, /* blue led */
-};
-
-static struct sht15_platform_data platform_data_sht15 = {
- .gpio_data = 100,
- .gpio_sck = 98,
-};
-
-static struct platform_device sht15 = {
- .name = "sht15",
- .id = -1,
- .dev = {
- .platform_data = &platform_data_sht15,
- },
-};
-
-static struct regulator_consumer_supply imote2_sensor_3_con[] = {
- {
- .dev = &sht15.dev,
- .supply = "vcc",
- },
-};
-
-static struct gpio_led imote2_led_pins[] = {
- {
- .name = "imote2:red",
- .gpio = 103,
- .active_low = 1,
- }, {
- .name = "imote2:green",
- .gpio = 104,
- .active_low = 1,
- }, {
- .name = "imote2:blue",
- .gpio = 105,
- .active_low = 1,
- },
-};
-
-static struct gpio_led_platform_data imote2_led_data = {
- .num_leds = ARRAY_SIZE(imote2_led_pins),
- .leds = imote2_led_pins,
-};
-
-static struct platform_device imote2_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &imote2_led_data,
- },
-};
-
-/* Reverse engineered partly from Platformx drivers */
-enum imote2_ldos{
- vcc_vref,
- vcc_cc2420,
- vcc_mica,
- vcc_bt,
- /* The two voltages available to sensor boards */
- vcc_sensor_1_8,
- vcc_sensor_3,
-
- vcc_sram_ext, /* directly connected to the pxa271 */
- vcc_pxa_pll,
- vcc_pxa_usim, /* Reference voltage for certain gpios */
- vcc_pxa_mem,
- vcc_pxa_flash,
- vcc_pxa_core, /*Dc-Dc buck not yet supported */
- vcc_lcd,
- vcc_bb,
- vcc_bbio,
- vcc_io, /* cc2420 802.15.4 radio and pxa vcc_io ?*/
-};
-
-/* The values of the various regulator constraints are obviously dependent
- * on exactly what is wired to each ldo. Unfortunately this information is
- * not generally available. More information has been requested from Xbow
- * but as of yet they haven't been forthcoming.
- *
- * Some of these are clearly Stargate 2 related (no way of plugging
- * in an lcd on the IM2 for example!).
- */
-static struct regulator_init_data imote2_ldo_init_data[] = {
- [vcc_bbio] = {
- .constraints = { /* board default 1.8V */
- .name = "vcc_bbio",
- .min_uV = 1800000,
- .max_uV = 1800000,
- },
- },
- [vcc_bb] = {
- .constraints = { /* board default 2.8V */
- .name = "vcc_bb",
- .min_uV = 2700000,
- .max_uV = 3000000,
- },
- },
- [vcc_pxa_flash] = {
- .constraints = {/* default is 1.8V */
- .name = "vcc_pxa_flash",
- .min_uV = 1800000,
- .max_uV = 1800000,
- },
- },
- [vcc_cc2420] = { /* also vcc_io */
- .constraints = {
- /* board default is 2.8V */
- .name = "vcc_cc2420",
- .min_uV = 2700000,
- .max_uV = 3300000,
- },
- },
- [vcc_vref] = { /* Reference for what? */
- .constraints = { /* default 1.8V */
- .name = "vcc_vref",
- .min_uV = 1800000,
- .max_uV = 1800000,
- },
- },
- [vcc_sram_ext] = {
- .constraints = { /* default 2.8V */
- .name = "vcc_sram_ext",
- .min_uV = 2800000,
- .max_uV = 2800000,
- },
- },
- [vcc_mica] = {
- .constraints = { /* default 2.8V */
- .name = "vcc_mica",
- .min_uV = 2800000,
- .max_uV = 2800000,
- },
- },
- [vcc_bt] = {
- .constraints = { /* default 2.8V */
- .name = "vcc_bt",
- .min_uV = 2800000,
- .max_uV = 2800000,
- },
- },
- [vcc_lcd] = {
- .constraints = { /* default 2.8V */
- .name = "vcc_lcd",
- .min_uV = 2700000,
- .max_uV = 3300000,
- },
- },
- [vcc_io] = { /* Same or higher than everything
- * bar vccbat and vccusb */
- .constraints = { /* default 2.8V */
- .name = "vcc_io",
- .min_uV = 2692000,
- .max_uV = 3300000,
- },
- },
- [vcc_sensor_1_8] = {
- .constraints = { /* default 1.8V */
- .name = "vcc_sensor_1_8",
- .min_uV = 1800000,
- .max_uV = 1800000,
- },
- },
- [vcc_sensor_3] = { /* curiously default 2.8V */
- .constraints = {
- .name = "vcc_sensor_3",
- .min_uV = 2800000,
- .max_uV = 3000000,
- },
- .num_consumer_supplies = ARRAY_SIZE(imote2_sensor_3_con),
- .consumer_supplies = imote2_sensor_3_con,
- },
- [vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/
- .constraints = {
- .name = "vcc_pxa_pll",
- .min_uV = 1170000,
- .max_uV = 1430000,
- },
- },
- [vcc_pxa_usim] = {
- .constraints = { /* default 1.8V */
- .name = "vcc_pxa_usim",
- .min_uV = 1710000,
- .max_uV = 2160000,
- },
- },
- [vcc_pxa_mem] = {
- .constraints = { /* default 1.8V */
- .name = "vcc_pxa_mem",
- .min_uV = 1800000,
- .max_uV = 1800000,
- },
- },
-};
-
-static struct da903x_subdev_info imote2_da9030_subdevs[] = {
- {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO2,
- .platform_data = &imote2_ldo_init_data[vcc_bbio],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO3,
- .platform_data = &imote2_ldo_init_data[vcc_bb],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO4,
- .platform_data = &imote2_ldo_init_data[vcc_pxa_flash],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO5,
- .platform_data = &imote2_ldo_init_data[vcc_cc2420],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO6,
- .platform_data = &imote2_ldo_init_data[vcc_vref],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO7,
- .platform_data = &imote2_ldo_init_data[vcc_sram_ext],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO8,
- .platform_data = &imote2_ldo_init_data[vcc_mica],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO9,
- .platform_data = &imote2_ldo_init_data[vcc_bt],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO10,
- .platform_data = &imote2_ldo_init_data[vcc_sensor_1_8],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO11,
- .platform_data = &imote2_ldo_init_data[vcc_sensor_3],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO12,
- .platform_data = &imote2_ldo_init_data[vcc_lcd],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO15,
- .platform_data = &imote2_ldo_init_data[vcc_pxa_pll],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO17,
- .platform_data = &imote2_ldo_init_data[vcc_pxa_usim],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO18,
- .platform_data = &imote2_ldo_init_data[vcc_io],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO19,
- .platform_data = &imote2_ldo_init_data[vcc_pxa_mem],
- },
-};
-
-static struct da903x_platform_data imote2_da9030_pdata = {
- .num_subdevs = ARRAY_SIZE(imote2_da9030_subdevs),
- .subdevs = imote2_da9030_subdevs,
-};
-
-/* As the the imote2 doesn't currently have a conventional SD slot
- * there is no option to hotplug cards, making all this rather simple
- */
-static int imote2_mci_get_ro(struct device *dev)
-{
- return 0;
-}
-
-/* Rather simple case as hotplugging not possible */
-static struct pxamci_platform_data imote2_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */
- .get_ro = imote2_mci_get_ro,
- .gpio_card_detect = -1,
- .gpio_card_ro = -1,
- .gpio_power = -1,
-};
-
-static struct mtd_partition imote2flash_partitions[] = {
- {
- .name = "Bootloader",
- .size = 0x00040000,
- .offset = 0,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "Kernel",
- .size = 0x00200000,
- .offset = 0x00040000,
- .mask_flags = 0,
- }, {
- .name = "Filesystem",
- .size = 0x01DC0000,
- .offset = 0x00240000,
- .mask_flags = 0,
- },
-};
-
-static struct resource flash_resources = {
- .start = PXA_CS0_PHYS,
- .end = PXA_CS0_PHYS + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct flash_platform_data imote2_flash_data = {
- .map_name = "cfi_probe",
- .parts = imote2flash_partitions,
- .nr_parts = ARRAY_SIZE(imote2flash_partitions),
- .name = "PXA27xOnChipROM",
- .width = 2,
-};
-
-static struct platform_device imote2_flash_device = {
- .name = "pxa2xx-flash",
- .id = 0,
- .dev = {
- .platform_data = &imote2_flash_data,
- },
- .resource = &flash_resources,
- .num_resources = 1,
-};
-
-/* Some of the drivers here are out of kernel at the moment (parts of IIO)
- * and it may be a while before they are in the mainline.
- */
-static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
- { /* UCAM sensor board */
- .type = "max1239",
- .addr = 0x35,
- }, { /* ITS400 Sensor board only */
- .type = "max1363",
- .addr = 0x34,
- /* Through a nand gate - Also beware, on V2 sensor board the
- * pull up resistors are missing.
- */
- .irq = IRQ_GPIO(99),
- }, { /* ITS400 Sensor board only */
- .type = "tsl2561",
- .addr = 0x49,
- /* Through a nand gate - Also beware, on V2 sensor board the
- * pull up resistors are missing.
- */
- .irq = IRQ_GPIO(99),
- }, { /* ITS400 Sensor board only */
- .type = "tmp175",
- .addr = 0x4A,
- .irq = IRQ_GPIO(96),
- }, { /* IMB400 Multimedia board */
- .type = "wm8940",
- .addr = 0x1A,
- },
-};
-
-static struct i2c_board_info __initdata imote2_pwr_i2c_board_info[] = {
- {
- .type = "da9030",
- .addr = 0x49,
- .platform_data = &imote2_da9030_pdata,
- .irq = gpio_to_irq(1),
- },
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_0_info = {
- .num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_1_info = {
- .num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
- .num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_chip staccel_chip_info = {
- .tx_threshold = 8,
- .rx_threshold = 8,
- .dma_burst_size = 8,
- .timeout = 235,
- .gpio_cs = 24,
-};
-
-static struct pxa2xx_spi_chip cc2420_info = {
- .tx_threshold = 8,
- .rx_threshold = 8,
- .dma_burst_size = 8,
- .timeout = 235,
- .gpio_cs = 39,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
- { /* Driver in IIO */
- .modalias = "lis3l02dq",
- .max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */
- .bus_num = 1,
- .chip_select = 0,
- .controller_data = &staccel_chip_info,
- .irq = IRQ_GPIO(96),
- }, { /* Driver out of kernel as it needs considerable rewriting */
- .modalias = "cc2420",
- .max_speed_hz = 6500000,
- .bus_num = 3,
- .chip_select = 0,
- .controller_data = &cc2420_info,
- },
-};
-
-static void im2_udc_command(int cmd)
-{
- switch (cmd) {
- case PXA2XX_UDC_CMD_CONNECT:
- UP2OCR |= UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE;
- break;
- case PXA2XX_UDC_CMD_DISCONNECT:
- UP2OCR &= ~(UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE);
- break;
- }
-}
-
-static struct pxa2xx_udc_mach_info imote2_udc_info __initdata = {
- .udc_command = im2_udc_command,
-};
-
-static struct platform_device *imote2_devices[] = {
- &imote2_flash_device,
- &imote2_leds,
- &sht15,
-};
-
-static struct i2c_pxa_platform_data i2c_pwr_pdata = {
- .fast_mode = 1,
-};
-
-static struct i2c_pxa_platform_data i2c_pdata = {
- .fast_mode = 1,
-};
-
-static void __init imote2_init(void)
-{
- pxa2xx_mfp_config(ARRAY_AND_SIZE(imote2_pin_config));
-
- pxa_set_ffuart_info(NULL);
- pxa_set_btuart_info(NULL);
- pxa_set_stuart_info(NULL);
-
- platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices));
-
- pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
- pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
- pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
-
- spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
- i2c_register_board_info(0, imote2_i2c_board_info,
- ARRAY_SIZE(imote2_i2c_board_info));
- i2c_register_board_info(1, imote2_pwr_i2c_board_info,
- ARRAY_SIZE(imote2_pwr_i2c_board_info));
-
- pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
- pxa_set_i2c_info(&i2c_pdata);
-
- pxa_set_mci_info(&imote2_mci_platform_data);
- pxa_set_udc_info(&imote2_udc_info);
-}
-
-MACHINE_START(INTELMOTE2, "IMOTE 2")
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .map_io = pxa_map_io,
- .init_irq = pxa27x_init_irq,
- .timer = &pxa_timer,
- .init_machine = imote2_init,
- .boot_params = 0xA0000100,
-MACHINE_END
#define BALLOON3_FPGA_VIRT (0xf1000000) /* as per balloon2 */
#define BALLOON3_FPGA_LENGTH 0x01000000
-/* FPGA/CPLD registers */
-#define BALLOON3_PCMCIA0_REG (BALLOON3_FPGA_VIRT + 0x00e00008)
-/* fixme - same for now */
-#define BALLOON3_PCMCIA1_REG (BALLOON3_FPGA_VIRT + 0x00e00008)
-#define BALLOON3_NANDIO_IO_REG (BALLOON3_FPGA_VIRT + 0x00e00000)
+/* FPGA / CPLD registers for CF socket */
+#define BALLOON3_CF_STATUS_REG (BALLOON3_FPGA_VIRT + 0x00e00008)
+#define BALLOON3_CF_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e00008)
+/* FPGA / CPLD version register */
+#define BALLOON3_FPGA_VER (BALLOON3_FPGA_VIRT + 0x00e0001c)
+/* FPGA / CPLD registers for NAND flash */
+#define BALLOON3_NAND_BASE (PXA_CS4_PHYS + 0x00e00000)
+#define BALLOON3_NAND_IO_REG (BALLOON3_FPGA_VIRT + 0x00e00000)
+#define BALLOON3_NAND_CONTROL2_REG (BALLOON3_FPGA_VIRT + 0x00e00010)
+#define BALLOON3_NAND_STAT_REG (BALLOON3_FPGA_VIRT + 0x00e00010)
+#define BALLOON3_NAND_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e00014)
+
/* fpga/cpld interrupt control register */
#define BALLOON3_INT_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e0000C)
-#define BALLOON3_NANDIO_CTL2_REG (BALLOON3_FPGA_VIRT + 0x00e00010)
-#define BALLOON3_NANDIO_CTL_REG (BALLOON3_FPGA_VIRT + 0x00e00014)
#define BALLOON3_VERSION_REG (BALLOON3_FPGA_VIRT + 0x00e0001c)
#define BALLOON3_SAMOSA_ADDR_REG (BALLOON3_FPGA_VIRT + 0x00c00000)
#define BALLOON3_SAMOSA_DATA_REG (BALLOON3_FPGA_VIRT + 0x00c00004)
#define BALLOON3_SAMOSA_STATUS_REG (BALLOON3_FPGA_VIRT + 0x00c0001c)
+/* CF Status Register bits (read-only) bits */
+#define BALLOON3_CF_nIRQ (1 << 0)
+#define BALLOON3_CF_nSTSCHG_BVD1 (1 << 1)
+
+/* CF Control Set Register bits / CF Control Clear Register bits (write-only) */
+#define BALLOON3_CF_RESET (1 << 0)
+#define BALLOON3_CF_ENABLE (1 << 1)
+#define BALLOON3_CF_ADD_ENABLE (1 << 2)
+
+/* CF Interrupt sources */
+#define BALLOON3_BP_CF_NRDY_IRQ BALLOON3_IRQ(0)
+#define BALLOON3_BP_NSTSCHG_IRQ BALLOON3_IRQ(1)
+
+/* NAND Control register */
+#define BALLOON3_NAND_CONTROL_FLWP (1 << 7)
+#define BALLOON3_NAND_CONTROL_FLSE (1 << 6)
+#define BALLOON3_NAND_CONTROL_FLCE3 (1 << 5)
+#define BALLOON3_NAND_CONTROL_FLCE2 (1 << 4)
+#define BALLOON3_NAND_CONTROL_FLCE1 (1 << 3)
+#define BALLOON3_NAND_CONTROL_FLCE0 (1 << 2)
+#define BALLOON3_NAND_CONTROL_FLALE (1 << 1)
+#define BALLOON3_NAND_CONTROL_FLCLE (1 << 0)
+
+/* NAND Status register */
+#define BALLOON3_NAND_STAT_RNB (1 << 0)
+
+/* NAND Control2 register */
+#define BALLOON3_NAND_CONTROL2_16BIT (1 << 0)
+
/* GPIOs for irqs */
#define BALLOON3_GPIO_AUX_NIRQ (94)
#define BALLOON3_GPIO_CODEC_IRQ (95)
#define BALLOON3_GPIO_S0_CD (105)
+/* NAND */
+#define BALLOON3_GPIO_RUN_NAND (102)
+
+/* PCF8574A Leds */
+#define BALLOON3_PCF_GPIO_BASE 160
+#define BALLOON3_PCF_GPIO_LED0 (BALLOON3_PCF_GPIO_BASE + 0)
+#define BALLOON3_PCF_GPIO_LED1 (BALLOON3_PCF_GPIO_BASE + 1)
+#define BALLOON3_PCF_GPIO_LED2 (BALLOON3_PCF_GPIO_BASE + 2)
+#define BALLOON3_PCF_GPIO_LED3 (BALLOON3_PCF_GPIO_BASE + 3)
+#define BALLOON3_PCF_GPIO_LED4 (BALLOON3_PCF_GPIO_BASE + 4)
+#define BALLOON3_PCF_GPIO_LED5 (BALLOON3_PCF_GPIO_BASE + 5)
+#define BALLOON3_PCF_GPIO_LED6 (BALLOON3_PCF_GPIO_BASE + 6)
+#define BALLOON3_PCF_GPIO_LED7 (BALLOON3_PCF_GPIO_BASE + 7)
+
/* FPGA Interrupt Mask/Acknowledge Register */
#define BALLOON3_INT_S0_IRQ (1 << 0) /* PCMCIA 0 IRQ */
#define BALLOON3_INT_S0_STSCHG (1 << 1) /* PCMCIA 0 status changed */
-/* CF Status Register */
-#define BALLOON3_PCMCIA_nIRQ (1 << 0) /* IRQ / ready signal */
-#define BALLOON3_PCMCIA_nSTSCHG_BVD1 (1 << 1)
- /* VDD sense / card status changed */
-
-/* CF control register (write) */
-#define BALLOON3_PCMCIA_RESET (1 << 0) /* Card reset signal */
-#define BALLOON3_PCMCIA_ENABLE (1 << 1)
-#define BALLOON3_PCMCIA_ADD_ENABLE (1 << 2)
-
/* CPLD (and FPGA) interface definitions */
#define CPLD_LCD0_DATA_SET 0x00
#define CPLD_LCD0_DATA_CLR 0x10
/* Balloon3 Interrupts */
#define BALLOON3_IRQ(x) (IRQ_BOARD_START + (x))
-#define BALLOON3_BP_CF_NRDY_IRQ BALLOON3_IRQ(0)
-#define BALLOON3_BP_NSTSCHG_IRQ BALLOON3_IRQ(1)
-
#define BALLOON3_AUX_NIRQ IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ)
#define BALLOON3_CODEC_IRQ IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
#define BALLOON3_S0_CD_IRQ IRQ_GPIO(BALLOON3_GPIO_S0_CD)
#include <mach/mfp.h>
/*
+ * base board glue for PXA270 module
+ */
+
+enum {
+ COLIBRI_PXA270_EVALBOARD = 0,
+ COLIBRI_PXA270_INCOME,
+};
+
+#if defined(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD)
+extern void colibri_pxa270_evalboard_init(void);
+#else
+static inline void colibri_pxa270_evalboard_init(void) {}
+#endif
+
+#if defined(CONFIG_MACH_COLIBRI_PXA270_INCOME)
+extern void colibri_pxa270_income_boardinit(void);
+#else
+static inline void colibri_pxa270_income_boardinit(void) {}
+#endif
+
+/*
* common settings for all modules
*/
/* physical memory regions */
#define COLIBRI_SDRAM_BASE 0xa0000000 /* SDRAM region */
-/* definitions for Colibri PXA270 */
-
-#define COLIBRI_PXA270_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */
-#define COLIBRI_PXA270_ETH_PHYS (PXA_CS2_PHYS) /* Ethernet */
-#define COLIBRI_PXA270_ETH_IRQ_GPIO 114
-#define COLIBRI_PXA270_ETH_IRQ \
- gpio_to_irq(mfp_to_gpio(COLIBRI_PXA270_ETH_IRQ_GPIO))
+/* GPIO definitions for Colibri PXA270 */
+#define GPIO114_COLIBRI_PXA270_ETH_IRQ 114
+#define GPIO0_COLIBRI_PXA270_SD_DETECT 0
+#define GPIO113_COLIBRI_PXA270_TS_IRQ 113
#endif /* _COLIBRI_H_ */
#define CORGI_GPIO_BACKLIGHT_CONT (CORGI_SCOOP_GPIO_BASE + 7)
#define CORGI_GPIO_MIC_BIAS (CORGI_SCOOP_GPIO_BASE + 8)
-/*
- * Shared data structures
- */
-extern struct platform_device corgiscoop_device;
-
#endif /* __ASM_ARCH_CORGI_H */
/*
GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean
-interrupt signal for determining cable presence. On the original gumstix,
-this is GPIO81, and GPIO83 needs to be defined as well. On the gumstix F,
+interrupt signal for determining cable presence. On the gumstix F,
this moves to GPIO17 and GPIO37. */
/* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn
has detected a cable insertion; driven low otherwise. */
-#ifdef CONFIG_ARCH_GUMSTIX_ORIG
-
-#define GPIO_GUMSTIX_USB_GPIOn 81
-#define GPIO_GUMSTIX_USB_GPIOx 83
-
-#else
-
#define GPIO_GUMSTIX_USB_GPIOn 35
#define GPIO_GUMSTIX_USB_GPIOx 41
-#endif
-
/* usb state change */
#define GUMSTIX_USB_INTR_IRQ IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn)
--- /dev/null
+/*
+ * Common functions for Palm LD, T5, TX, Z72
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __INCLUDE_MACH_PALM27X__
+#define __INCLUDE_MACH_PALM27X__
+
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+extern void __init palm27x_mmc_init(int detect, int ro, int power,
+ int power_inverted);
+#else
+static inline void palm27x_mmc_init(int detect, int ro, int power,
+ int power_inverted)
+{}
+#endif
+
+#if defined(CONFIG_SUSPEND)
+extern void __init palm27x_pm_init(unsigned long str_base);
+#else
+static inline void palm27x_pm_init(unsigned long str_base) {}
+#endif
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+extern struct pxafb_mode_info palm_320x480_lcd_mode;
+extern struct pxafb_mode_info palm_320x320_lcd_mode;
+extern struct pxafb_mode_info palm_320x320_new_lcd_mode;
+extern void __init palm27x_lcd_init(int power,
+ struct pxafb_mode_info *mode);
+#else
+static inline void palm27x_lcd_init(int power, struct pxafb_mode_info *mode) {}
+#endif
+
+#if defined(CONFIG_USB_GADGET_PXA27X) || \
+ defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+extern void __init palm27x_udc_init(int vbus, int pullup,
+ int vbus_inverted);
+#else
+static inline void palm27x_udc_init(int vbus, int pullup, int vbus_inverted) {}
+#endif
+
+#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
+extern void __init palm27x_irda_init(int pwdn);
+#else
+static inline void palm27x_irda_init(int pwdn) {}
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_WM97XX) || \
+ defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE)
+extern void __init palm27x_ac97_init(int minv, int maxv, int jack,
+ int reset);
+#else
+static inline void palm27x_ac97_init(int minv, int maxv, int jack, int reset) {}
+#endif
+
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+extern void __init palm27x_pwm_init(int bl, int lcd);
+#else
+static inline void palm27x_pwm_init(int bl, int lcd) {}
+#endif
+
+#if defined(CONFIG_PDA_POWER) || defined(CONFIG_PDA_POWER_MODULE)
+extern void __init palm27x_power_init(int ac, int usb);
+#else
+static inline void palm27x_power_init(int ac, int usb) {}
+#endif
+
+#if defined(CONFIG_REGULATOR_MAX1586) || \
+ defined(CONFIG_REGULATOR_MAX1586_MODULE)
+extern void __init palm27x_pmic_init(void);
+#else
+static inline void palm27x_pmic_init(void) {}
+#endif
+
+#endif /* __INCLUDE_MACH_PALM27X__ */
--- /dev/null
+/*
+ * Generic PXA PATA driver
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MACH_PATA_PXA_H__
+#define __MACH_PATA_PXA_H__
+
+struct pata_pxa_pdata {
+ /* PXA DMA DREQ<0:2> pin */
+ uint32_t dma_dreq;
+ /* Register shift */
+ uint32_t reg_shift;
+ /* IRQ flags */
+ uint32_t irq_flags;
+};
+
+#endif /* __MACH_PATA_PXA_H__ */
+++ /dev/null
-/*
- * SharpSL SSP Driver
- */
-
-unsigned long corgi_ssp_ads7846_putget(unsigned long);
-unsigned long corgi_ssp_ads7846_get(void);
-void corgi_ssp_ads7846_put(unsigned long data);
-void corgi_ssp_ads7846_lock(void);
-void corgi_ssp_ads7846_unlock(void);
-void corgi_ssp_lcdtg_send (unsigned char adrs, unsigned char data);
-void corgi_ssp_blduty_set(int duty);
-int corgi_ssp_max1111_get(unsigned long data);
-
-/*
- * SharpSL Touchscreen Driver
- */
-
-struct corgits_machinfo {
- unsigned long (*get_hsync_invperiod)(void);
- void (*put_hsync)(void);
- void (*wait_hsync)(void);
-};
-
-
-/*
- * SharpSL Backlight
- */
-extern void corgibl_limit_intensity(int limit);
-extern void corgi_lcd_limit_intensity(int limit);
-
-
-/*
- * SharpSL Battery/PM Driver
- */
-extern void sharpsl_battery_kick(void);
extern struct sharpsl_pm_status sharpsl_pm;
+extern struct battery_thresh sharpsl_battery_levels_acin[];
+extern struct battery_thresh sharpsl_battery_levels_noac[];
#define SHARPSL_LED_ERROR 2
#define SHARPSL_LED_ON 1
void sharpsl_battery_kick(void);
void sharpsl_pm_led(int val);
+/* MAX1111 Channel Definitions */
+#define MAX1111_BATT_VOLT 4u
+#define MAX1111_BATT_TEMP 2u
+#define MAX1111_ACIN_VOLT 6u
+int sharpsl_pm_pxa_read_max1111(int channel);
+
+void corgi_lcd_limit_intensity(int limit);
#endif
/*
* Shared data structures
*/
-extern struct platform_device spitzscoop_device;
-extern struct platform_device spitzscoop2_device;
extern struct platform_device spitzssp_device;
extern struct sharpsl_charger_machinfo spitz_pm_machinfo;
#include <linux/irq.h>
#include <linux/pda_power.h>
#include <linux/power_supply.h>
-#include <linux/wm97xx_batt.h>
+#include <linux/wm97xx.h>
#include <linux/mtd/physmap.h>
#include <linux/usb/gpio_vbus.h>
#include <linux/regulator/max1586.h>
},
};
-static struct wm97xx_batt_info mioa701_battery_data = {
+static struct wm97xx_batt_pdata mioa701_battery_data = {
.batt_aux = WM97XX_AUX_ID1,
.temp_aux = -1,
.charge_gpio = -1,
.batt_name = "mioa701_battery",
};
+static struct wm97xx_pdata mioa701_wm97xx_pdata = {
+ .batt_pdata = &mioa701_battery_data,
+};
+
/*
* Voltage regulation
*/
static pxa2xx_audio_ops_t mioa701_ac97_info = {
.reset_gpio = 95,
+ .codec_pdata = { &mioa701_wm97xx_pdata, },
};
/*
set_pxa_fb_info(&mioa701_pxafb_info);
pxa_set_mci_info(&mioa701_mci_info);
pxa_set_keypad_info(&mioa701_keypad_info);
- wm97xx_bat_set_pdata(&mioa701_battery_data);
pxa_set_udc_info(&mioa701_udc_info);
pxa_set_ac97_info(&mioa701_ac97_info);
pm_power_off = mioa701_poweroff;
--- /dev/null
+/*
+ * Common code for Palm LD, T5, TX, Z72
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/wm97xx.h>
+#include <linux/power_supply.h>
+#include <linux/usb/gpio_vbus.h>
+#include <linux/regulator/max1586.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/pxa27x.h>
+#include <mach/audio.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/irda.h>
+#include <mach/udc.h>
+#include <mach/palmasoc.h>
+#include <mach/palm27x.h>
+
+#include <plat/i2c.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data palm27x_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .detect_delay_ms = 200,
+};
+
+void __init palm27x_mmc_init(int detect, int ro, int power,
+ int power_inverted)
+{
+ palm27x_mci_platform_data.gpio_card_detect = detect;
+ palm27x_mci_platform_data.gpio_card_ro = ro;
+ palm27x_mci_platform_data.gpio_power = power;
+ palm27x_mci_platform_data.gpio_power_invert = power_inverted;
+
+ pxa_set_mci_info(&palm27x_mci_platform_data);
+}
+#endif
+
+/******************************************************************************
+ * Power management - standby
+ ******************************************************************************/
+#if defined(CONFIG_SUSPEND)
+void __init palm27x_pm_init(unsigned long str_base)
+{
+ static const unsigned long resume[] = {
+ 0xe3a00101, /* mov r0, #0x40000000 */
+ 0xe380060f, /* orr r0, r0, #0x00f00000 */
+ 0xe590f008, /* ldr pc, [r0, #0x08] */
+ };
+
+ /*
+ * Copy the bootloader.
+ * NOTE: PalmZ72 uses a different wakeup method!
+ */
+ memcpy(phys_to_virt(str_base), resume, sizeof(resume));
+}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+struct pxafb_mode_info palm_320x480_lcd_mode = {
+ .pixclock = 57692,
+ .xres = 320,
+ .yres = 480,
+ .bpp = 16,
+
+ .left_margin = 32,
+ .right_margin = 1,
+ .upper_margin = 7,
+ .lower_margin = 1,
+
+ .hsync_len = 4,
+ .vsync_len = 1,
+};
+
+struct pxafb_mode_info palm_320x320_lcd_mode = {
+ .pixclock = 115384,
+ .xres = 320,
+ .yres = 320,
+ .bpp = 16,
+
+ .left_margin = 27,
+ .right_margin = 7,
+ .upper_margin = 7,
+ .lower_margin = 8,
+
+ .hsync_len = 6,
+ .vsync_len = 1,
+};
+
+struct pxafb_mode_info palm_320x320_new_lcd_mode = {
+ .pixclock = 86538,
+ .xres = 320,
+ .yres = 320,
+ .bpp = 16,
+
+ .left_margin = 20,
+ .right_margin = 8,
+ .upper_margin = 8,
+ .lower_margin = 5,
+
+ .hsync_len = 4,
+ .vsync_len = 1,
+};
+
+static struct pxafb_mach_info palm27x_lcd_screen = {
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static int palm27x_lcd_power;
+static void palm27x_lcd_ctl(int on, struct fb_var_screeninfo *info)
+{
+ gpio_set_value(palm27x_lcd_power, on);
+}
+
+void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode)
+{
+ palm27x_lcd_screen.modes = mode;
+
+ if (gpio_is_valid(power)) {
+ if (!gpio_request(power, "LCD power")) {
+ pr_err("Palm27x: failed to claim lcd power gpio!\n");
+ return;
+ }
+ if (!gpio_direction_output(power, 1)) {
+ pr_err("Palm27x: lcd power configuration failed!\n");
+ return;
+ }
+ palm27x_lcd_power = power;
+ palm27x_lcd_screen.pxafb_lcd_power = palm27x_lcd_ctl;
+ }
+
+ set_pxa_fb_info(&palm27x_lcd_screen);
+}
+#endif
+
+/******************************************************************************
+ * USB Gadget
+ ******************************************************************************/
+#if defined(CONFIG_USB_GADGET_PXA27X) || \
+ defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+static struct gpio_vbus_mach_info palm27x_udc_info = {
+ .gpio_vbus_inverted = 1,
+};
+
+static struct platform_device palm27x_gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &palm27x_udc_info,
+ },
+};
+
+void __init palm27x_udc_init(int vbus, int pullup, int vbus_inverted)
+{
+ palm27x_udc_info.gpio_vbus = vbus;
+ palm27x_udc_info.gpio_pullup = pullup;
+
+ palm27x_udc_info.gpio_vbus_inverted = vbus_inverted;
+
+ if (!gpio_request(pullup, "USB Pullup")) {
+ gpio_direction_output(pullup,
+ palm27x_udc_info.gpio_vbus_inverted);
+ gpio_free(pullup);
+ } else
+ return;
+
+ platform_device_register(&palm27x_gpio_vbus);
+}
+#endif
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
+static struct pxaficp_platform_data palm27x_ficp_platform_data = {
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+};
+
+void __init palm27x_irda_init(int pwdn)
+{
+ palm27x_ficp_platform_data.gpio_pwdown = pwdn;
+ pxa_set_ficp_info(&palm27x_ficp_platform_data);
+}
+#endif
+
+/******************************************************************************
+ * WM97xx audio, battery
+ ******************************************************************************/
+#if defined(CONFIG_TOUCHSCREEN_WM97XX) || \
+ defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE)
+static struct wm97xx_batt_pdata palm27x_batt_pdata = {
+ .batt_aux = WM97XX_AUX_ID3,
+ .temp_aux = WM97XX_AUX_ID2,
+ .charge_gpio = -1,
+ .batt_mult = 1000,
+ .batt_div = 414,
+ .temp_mult = 1,
+ .temp_div = 1,
+ .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .batt_name = "main-batt",
+};
+
+static struct wm97xx_pdata palm27x_wm97xx_pdata = {
+ .batt_pdata = &palm27x_batt_pdata,
+};
+
+static pxa2xx_audio_ops_t palm27x_ac97_pdata = {
+ .codec_pdata = { &palm27x_wm97xx_pdata, },
+};
+
+static struct palm27x_asoc_info palm27x_asoc_pdata = {
+ .jack_gpio = -1,
+};
+
+static struct platform_device palm27x_asoc = {
+ .name = "palm27x-asoc",
+ .id = -1,
+ .dev = {
+ .platform_data = &palm27x_asoc_pdata,
+ },
+};
+
+void __init palm27x_ac97_init(int minv, int maxv, int jack, int reset)
+{
+ palm27x_ac97_pdata.reset_gpio = reset;
+ palm27x_asoc_pdata.jack_gpio = jack;
+
+ if (minv < 0 || maxv < 0) {
+ palm27x_ac97_pdata.codec_pdata[0] = NULL;
+ pxa_set_ac97_info(&palm27x_ac97_pdata);
+ } else {
+ palm27x_batt_pdata.min_voltage = minv,
+ palm27x_batt_pdata.max_voltage = maxv,
+
+ pxa_set_ac97_info(&palm27x_ac97_pdata);
+ platform_device_register(&palm27x_asoc);
+ }
+}
+#endif
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static int palm_bl_power;
+static int palm_lcd_power;
+
+static int palm27x_backlight_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(palm_bl_power, "BL POWER");
+ if (ret)
+ goto err;
+ ret = gpio_direction_output(palm_bl_power, 0);
+ if (ret)
+ goto err2;
+
+ if (gpio_is_valid(palm_lcd_power)) {
+ ret = gpio_request(palm_lcd_power, "LCD POWER");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_output(palm_lcd_power, 0);
+ if (ret)
+ goto err3;
+ }
+
+ return 0;
+err3:
+ gpio_free(palm_lcd_power);
+err2:
+ gpio_free(palm_bl_power);
+err:
+ return ret;
+}
+
+static int palm27x_backlight_notify(struct device *dev, int brightness)
+{
+ gpio_set_value(palm_bl_power, brightness);
+ if (gpio_is_valid(palm_lcd_power))
+ gpio_set_value(palm_lcd_power, brightness);
+ return brightness;
+}
+
+static void palm27x_backlight_exit(struct device *dev)
+{
+ gpio_free(palm_bl_power);
+ if (gpio_is_valid(palm_lcd_power))
+ gpio_free(palm_lcd_power);
+}
+
+static struct platform_pwm_backlight_data palm27x_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = 0xfe,
+ .dft_brightness = 0x7e,
+ .pwm_period_ns = 3500,
+ .init = palm27x_backlight_init,
+ .notify = palm27x_backlight_notify,
+ .exit = palm27x_backlight_exit,
+};
+
+static struct platform_device palm27x_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &palm27x_backlight_data,
+ },
+};
+
+void __init palm27x_pwm_init(int bl, int lcd)
+{
+ palm_bl_power = bl;
+ palm_lcd_power = lcd;
+ platform_device_register(&palm27x_backlight);
+}
+#endif
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+#if defined(CONFIG_PDA_POWER) || defined(CONFIG_PDA_POWER_MODULE)
+static int palm_ac_state;
+static int palm_usb_state;
+
+static int palm27x_power_supply_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(palm_ac_state, "AC state");
+ if (ret)
+ goto err1;
+ ret = gpio_direction_input(palm_ac_state);
+ if (ret)
+ goto err2;
+
+ if (gpio_is_valid(palm_usb_state)) {
+ ret = gpio_request(palm_usb_state, "USB state");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_input(palm_usb_state);
+ if (ret)
+ goto err3;
+ }
+
+ return 0;
+err3:
+ gpio_free(palm_usb_state);
+err2:
+ gpio_free(palm_ac_state);
+err1:
+ return ret;
+}
+
+static void palm27x_power_supply_exit(struct device *dev)
+{
+ gpio_free(palm_usb_state);
+ gpio_free(palm_ac_state);
+}
+
+static int palm27x_is_ac_online(void)
+{
+ return gpio_get_value(palm_ac_state);
+}
+
+static int palm27x_is_usb_online(void)
+{
+ return !gpio_get_value(palm_usb_state);
+}
+static char *palm27x_supplicants[] = {
+ "main-battery",
+};
+
+static struct pda_power_pdata palm27x_ps_info = {
+ .init = palm27x_power_supply_init,
+ .exit = palm27x_power_supply_exit,
+ .is_ac_online = palm27x_is_ac_online,
+ .is_usb_online = palm27x_is_usb_online,
+ .supplied_to = palm27x_supplicants,
+ .num_supplicants = ARRAY_SIZE(palm27x_supplicants),
+};
+
+static struct platform_device palm27x_power_supply = {
+ .name = "pda-power",
+ .id = -1,
+ .dev = {
+ .platform_data = &palm27x_ps_info,
+ },
+};
+
+void __init palm27x_power_init(int ac, int usb)
+{
+ palm_ac_state = ac;
+ palm_usb_state = usb;
+ platform_device_register(&palm27x_power_supply);
+}
+#endif
+
+/******************************************************************************
+ * Core power regulator
+ ******************************************************************************/
+#if defined(CONFIG_REGULATOR_MAX1586) || \
+ defined(CONFIG_REGULATOR_MAX1586_MODULE)
+static struct regulator_consumer_supply palm27x_max1587a_consumers[] = {
+ {
+ .supply = "vcc_core",
+ }
+};
+
+static struct regulator_init_data palm27x_max1587a_v3_info = {
+ .constraints = {
+ .name = "vcc_core range",
+ .min_uV = 900000,
+ .max_uV = 1705000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .consumer_supplies = palm27x_max1587a_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(palm27x_max1587a_consumers),
+};
+
+static struct max1586_subdev_data palm27x_max1587a_subdevs[] = {
+ {
+ .name = "vcc_core",
+ .id = MAX1586_V3,
+ .platform_data = &palm27x_max1587a_v3_info,
+ }
+};
+
+static struct max1586_platform_data palm27x_max1587a_info = {
+ .subdevs = palm27x_max1587a_subdevs,
+ .num_subdevs = ARRAY_SIZE(palm27x_max1587a_subdevs),
+ .v3_gain = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
+};
+
+static struct i2c_board_info __initdata palm27x_pi2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("max1586", 0x14),
+ .platform_data = &palm27x_max1587a_info,
+ },
+};
+
+void __init palm27x_pmic_init(void)
+{
+ i2c_register_board_info(1, ARRAY_AND_SIZE(palm27x_pi2c_board_info));
+ pxa27x_set_i2c_power_info(NULL);
+}
+#endif
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
+#include <linux/wm97xx.h>
#include <linux/power_supply.h>
#include <linux/sysdev.h>
#include <linux/mtd/mtd.h>
#include <mach/irda.h>
#include <mach/pxa27x_keypad.h>
#include <mach/palmasoc.h>
+#include <mach/palm27x.h>
#include "generic.h"
#include "devices.h"
/******************************************************************************
* NOR Flash
******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
static struct mtd_partition palmld_partitions[] = {
{
.name = "Flash",
},
};
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-static struct pxamci_platform_data palmld_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .gpio_card_detect = GPIO_NR_PALMLD_SD_DETECT_N,
- .gpio_card_ro = GPIO_NR_PALMLD_SD_READONLY,
- .gpio_power = GPIO_NR_PALMLD_SD_POWER,
- .detect_delay_ms = 200,
-};
+static void __init palmld_nor_init(void)
+{
+ platform_device_register(&palmld_flash);
+}
+#else
+static inline void palmld_nor_init(void) {}
+#endif
/******************************************************************************
* GPIO keyboard
******************************************************************************/
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
static unsigned int palmld_matrix_keys[] = {
KEY(0, 1, KEY_F2),
KEY(0, 2, KEY_UP),
.debounce_interval = 30,
};
+static void __init palmld_kpc_init(void)
+{
+ pxa_set_keypad_info(&palmld_keypad_platform_data);
+}
+#else
+static inline void palmld_kpc_init(void) {}
+#endif
+
/******************************************************************************
* GPIO keys
******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
static struct gpio_keys_button palmld_pxa_buttons[] = {
{KEY_F8, GPIO_NR_PALMLD_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
{KEY_F9, GPIO_NR_PALMLD_LOCK_SWITCH, 0, "Lock Switch" },
},
};
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-static int palmld_backlight_init(struct device *dev)
-{
- int ret;
-
- ret = gpio_request(GPIO_NR_PALMLD_BL_POWER, "BL POWER");
- if (ret)
- goto err;
- ret = gpio_direction_output(GPIO_NR_PALMLD_BL_POWER, 0);
- if (ret)
- goto err2;
- ret = gpio_request(GPIO_NR_PALMLD_LCD_POWER, "LCD POWER");
- if (ret)
- goto err2;
- ret = gpio_direction_output(GPIO_NR_PALMLD_LCD_POWER, 0);
- if (ret)
- goto err3;
-
- return 0;
-err3:
- gpio_free(GPIO_NR_PALMLD_LCD_POWER);
-err2:
- gpio_free(GPIO_NR_PALMLD_BL_POWER);
-err:
- return ret;
-}
-
-static int palmld_backlight_notify(struct device *dev, int brightness)
+static void __init palmld_keys_init(void)
{
- gpio_set_value(GPIO_NR_PALMLD_BL_POWER, brightness);
- gpio_set_value(GPIO_NR_PALMLD_LCD_POWER, brightness);
- return brightness;
+ platform_device_register(&palmld_pxa_keys);
}
-
-static void palmld_backlight_exit(struct device *dev)
-{
- gpio_free(GPIO_NR_PALMLD_BL_POWER);
- gpio_free(GPIO_NR_PALMLD_LCD_POWER);
-}
-
-static struct platform_pwm_backlight_data palmld_backlight_data = {
- .pwm_id = 0,
- .max_brightness = PALMLD_MAX_INTENSITY,
- .dft_brightness = PALMLD_MAX_INTENSITY,
- .pwm_period_ns = PALMLD_PERIOD_NS,
- .init = palmld_backlight_init,
- .notify = palmld_backlight_notify,
- .exit = palmld_backlight_exit,
-};
-
-static struct platform_device palmld_backlight = {
- .name = "pwm-backlight",
- .dev = {
- .parent = &pxa27x_device_pwm0.dev,
- .platform_data = &palmld_backlight_data,
- },
-};
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data palmld_ficp_platform_data = {
- .gpio_pwdown = GPIO_NR_PALMLD_IR_DISABLE,
- .transceiver_cap = IR_SIRMODE | IR_OFF,
-};
+#else
+static inline void palmld_keys_init(void) {}
+#endif
/******************************************************************************
* LEDs
******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
struct gpio_led gpio_leds[] = {
{
.name = "palmld:green:led",
}
};
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-static int power_supply_init(struct device *dev)
-{
- int ret;
-
- ret = gpio_request(GPIO_NR_PALMLD_POWER_DETECT, "CABLE_STATE_AC");
- if (ret)
- goto err1;
- ret = gpio_direction_input(GPIO_NR_PALMLD_POWER_DETECT);
- if (ret)
- goto err2;
-
- ret = gpio_request(GPIO_NR_PALMLD_USB_DETECT_N, "CABLE_STATE_USB");
- if (ret)
- goto err2;
- ret = gpio_direction_input(GPIO_NR_PALMLD_USB_DETECT_N);
- if (ret)
- goto err3;
-
- return 0;
-
-err3:
- gpio_free(GPIO_NR_PALMLD_USB_DETECT_N);
-err2:
- gpio_free(GPIO_NR_PALMLD_POWER_DETECT);
-err1:
- return ret;
-}
-
-static int palmld_is_ac_online(void)
+static void __init palmld_leds_init(void)
{
- return gpio_get_value(GPIO_NR_PALMLD_POWER_DETECT);
+ platform_device_register(&palmld_leds);
}
-
-static int palmld_is_usb_online(void)
-{
- return !gpio_get_value(GPIO_NR_PALMLD_USB_DETECT_N);
-}
-
-static void power_supply_exit(struct device *dev)
-{
- gpio_free(GPIO_NR_PALMLD_USB_DETECT_N);
- gpio_free(GPIO_NR_PALMLD_POWER_DETECT);
-}
-
-static char *palmld_supplicants[] = {
- "main-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
- .init = power_supply_init,
- .is_ac_online = palmld_is_ac_online,
- .is_usb_online = palmld_is_usb_online,
- .exit = power_supply_exit,
- .supplied_to = palmld_supplicants,
- .num_supplicants = ARRAY_SIZE(palmld_supplicants),
-};
-
-static struct platform_device power_supply = {
- .name = "pda-power",
- .id = -1,
- .dev = {
- .platform_data = &power_supply_info,
- },
-};
-
-/******************************************************************************
- * WM97xx battery
- ******************************************************************************/
-static struct wm97xx_batt_info wm97xx_batt_pdata = {
- .batt_aux = WM97XX_AUX_ID3,
- .temp_aux = WM97XX_AUX_ID2,
- .charge_gpio = -1,
- .max_voltage = PALMLD_BAT_MAX_VOLTAGE,
- .min_voltage = PALMLD_BAT_MIN_VOLTAGE,
- .batt_mult = 1000,
- .batt_div = 414,
- .temp_mult = 1,
- .temp_div = 1,
- .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO,
- .batt_name = "main-batt",
-};
-
-/******************************************************************************
- * aSoC audio
- ******************************************************************************/
-static struct palm27x_asoc_info palmld_asoc_pdata = {
- .jack_gpio = GPIO_NR_PALMLD_EARPHONE_DETECT,
-};
-
-static pxa2xx_audio_ops_t palmld_ac97_pdata = {
- .reset_gpio = 95,
-};
-
-static struct platform_device palmld_asoc = {
- .name = "palm27x-asoc",
- .id = -1,
- .dev = {
- .platform_data = &palmld_asoc_pdata,
- },
-};
+#else
+static inline void palmld_leds_init(void) {}
+#endif
/******************************************************************************
* HDD
******************************************************************************/
-static struct platform_device palmld_hdd = {
+#if defined(CONFIG_PATA_PALMLD) || defined(CONFIG_PATA_PALMLD_MODULE)
+static struct platform_device palmld_ide_device = {
.name = "pata_palmld",
.id = -1,
};
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-static struct pxafb_mode_info palmld_lcd_modes[] = {
-{
- .pixclock = 57692,
- .xres = 320,
- .yres = 480,
- .bpp = 16,
-
- .left_margin = 32,
- .right_margin = 1,
- .upper_margin = 7,
- .lower_margin = 1,
-
- .hsync_len = 4,
- .vsync_len = 1,
-},
-};
-
-static struct pxafb_mach_info palmld_lcd_screen = {
- .modes = palmld_lcd_modes,
- .num_modes = ARRAY_SIZE(palmld_lcd_modes),
- .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-/******************************************************************************
- * Power management - standby
- ******************************************************************************/
-static void __init palmld_pm_init(void)
+static void __init palmld_ide_init(void)
{
- static u32 resume[] = {
- 0xe3a00101, /* mov r0, #0x40000000 */
- 0xe380060f, /* orr r0, r0, #0x00f00000 */
- 0xe590f008, /* ldr pc, [r0, #0x08] */
- };
-
- /* copy the bootloader */
- memcpy(phys_to_virt(PALMLD_STR_BASE), resume, sizeof(resume));
+ platform_device_register(&palmld_ide_device);
}
+#else
+static inline void palmld_ide_init(void) {}
+#endif
/******************************************************************************
* Machine init
******************************************************************************/
-static struct platform_device *devices[] __initdata = {
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
- &palmld_pxa_keys,
-#endif
- &palmld_backlight,
- &palmld_leds,
- &power_supply,
- &palmld_asoc,
- &palmld_hdd,
- &palmld_flash,
-};
-
static struct map_desc palmld_io_desc[] __initdata = {
{
.virtual = PALMLD_IDE_VIRT,
static void __init palmld_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config));
-
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
- palmld_pm_init();
- set_pxa_fb_info(&palmld_lcd_screen);
- pxa_set_mci_info(&palmld_mci_platform_data);
- pxa_set_ac97_info(&palmld_ac97_pdata);
- pxa_set_ficp_info(&palmld_ficp_platform_data);
- pxa_set_keypad_info(&palmld_keypad_platform_data);
- wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
+ palm27x_mmc_init(GPIO_NR_PALMLD_SD_DETECT_N, GPIO_NR_PALMLD_SD_READONLY,
+ GPIO_NR_PALMLD_SD_POWER, 0);
+ palm27x_pm_init(PALMLD_STR_BASE);
+ palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
+ palm27x_irda_init(GPIO_NR_PALMLD_IR_DISABLE);
+ palm27x_ac97_init(PALMLD_BAT_MIN_VOLTAGE, PALMLD_BAT_MAX_VOLTAGE,
+ GPIO_NR_PALMLD_EARPHONE_DETECT, 95);
+ palm27x_pwm_init(GPIO_NR_PALMLD_BL_POWER, GPIO_NR_PALMLD_LCD_POWER);
+ palm27x_power_init(GPIO_NR_PALMLD_POWER_DETECT,
+ GPIO_NR_PALMLD_USB_DETECT_N);
+ palm27x_pmic_init();
+ palmld_kpc_init();
+ palmld_keys_init();
+ palmld_nor_init();
+ palmld_leds_init();
+ palmld_ide_init();
}
MACHINE_START(PALMLD, "Palm LifeDrive")
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
+#include <linux/wm97xx.h>
#include <linux/power_supply.h>
#include <linux/usb/gpio_vbus.h>
#include <mach/pxa27x_keypad.h>
#include <mach/udc.h>
#include <mach/palmasoc.h>
+#include <mach/palm27x.h>
#include "generic.h"
#include "devices.h"
};
/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-static struct pxamci_platform_data palmt5_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .gpio_card_detect = GPIO_NR_PALMT5_SD_DETECT_N,
- .gpio_card_ro = GPIO_NR_PALMT5_SD_READONLY,
- .gpio_power = GPIO_NR_PALMT5_SD_POWER,
- .detect_delay_ms = 200,
-};
-
-/******************************************************************************
* GPIO keyboard
******************************************************************************/
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
static unsigned int palmt5_matrix_keys[] = {
KEY(0, 0, KEY_POWER),
KEY(0, 1, KEY_F1),
.debounce_interval = 30,
};
+static void __init palmt5_kpc_init(void)
+{
+ pxa_set_keypad_info(&palmt5_keypad_platform_data);
+}
+#else
+static inline void palmt5_kpc_init(void) {}
+#endif
+
/******************************************************************************
* GPIO keys
******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
static struct gpio_keys_button palmt5_pxa_buttons[] = {
{KEY_F8, GPIO_NR_PALMT5_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
};
},
};
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-static int palmt5_backlight_init(struct device *dev)
-{
- int ret;
-
- ret = gpio_request(GPIO_NR_PALMT5_BL_POWER, "BL POWER");
- if (ret)
- goto err;
- ret = gpio_direction_output(GPIO_NR_PALMT5_BL_POWER, 0);
- if (ret)
- goto err2;
- ret = gpio_request(GPIO_NR_PALMT5_LCD_POWER, "LCD POWER");
- if (ret)
- goto err2;
- ret = gpio_direction_output(GPIO_NR_PALMT5_LCD_POWER, 0);
- if (ret)
- goto err3;
-
- return 0;
-err3:
- gpio_free(GPIO_NR_PALMT5_LCD_POWER);
-err2:
- gpio_free(GPIO_NR_PALMT5_BL_POWER);
-err:
- return ret;
-}
-
-static int palmt5_backlight_notify(struct device *dev, int brightness)
-{
- gpio_set_value(GPIO_NR_PALMT5_BL_POWER, brightness);
- gpio_set_value(GPIO_NR_PALMT5_LCD_POWER, brightness);
- return brightness;
-}
-
-static void palmt5_backlight_exit(struct device *dev)
-{
- gpio_free(GPIO_NR_PALMT5_BL_POWER);
- gpio_free(GPIO_NR_PALMT5_LCD_POWER);
-}
-
-static struct platform_pwm_backlight_data palmt5_backlight_data = {
- .pwm_id = 0,
- .max_brightness = PALMT5_MAX_INTENSITY,
- .dft_brightness = PALMT5_MAX_INTENSITY,
- .pwm_period_ns = PALMT5_PERIOD_NS,
- .init = palmt5_backlight_init,
- .notify = palmt5_backlight_notify,
- .exit = palmt5_backlight_exit,
-};
-
-static struct platform_device palmt5_backlight = {
- .name = "pwm-backlight",
- .dev = {
- .parent = &pxa27x_device_pwm0.dev,
- .platform_data = &palmt5_backlight_data,
- },
-};
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data palmt5_ficp_platform_data = {
- .gpio_pwdown = GPIO_NR_PALMT5_IR_DISABLE,
- .transceiver_cap = IR_SIRMODE | IR_OFF,
-};
-
-/******************************************************************************
- * UDC
- ******************************************************************************/
-static struct gpio_vbus_mach_info palmt5_udc_info = {
- .gpio_vbus = GPIO_NR_PALMT5_USB_DETECT_N,
- .gpio_vbus_inverted = 1,
- .gpio_pullup = GPIO_NR_PALMT5_USB_PULLUP,
-};
-
-static struct platform_device palmt5_gpio_vbus = {
- .name = "gpio-vbus",
- .id = -1,
- .dev = {
- .platform_data = &palmt5_udc_info,
- },
-};
-
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-static int power_supply_init(struct device *dev)
-{
- int ret;
-
- ret = gpio_request(GPIO_NR_PALMT5_POWER_DETECT, "CABLE_STATE_AC");
- if (ret)
- goto err1;
- ret = gpio_direction_input(GPIO_NR_PALMT5_POWER_DETECT);
- if (ret)
- goto err2;
-
- return 0;
-err2:
- gpio_free(GPIO_NR_PALMT5_POWER_DETECT);
-err1:
- return ret;
-}
-
-static int palmt5_is_ac_online(void)
-{
- return gpio_get_value(GPIO_NR_PALMT5_POWER_DETECT);
-}
-
-static void power_supply_exit(struct device *dev)
-{
- gpio_free(GPIO_NR_PALMT5_POWER_DETECT);
-}
-
-static char *palmt5_supplicants[] = {
- "main-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
- .init = power_supply_init,
- .is_ac_online = palmt5_is_ac_online,
- .exit = power_supply_exit,
- .supplied_to = palmt5_supplicants,
- .num_supplicants = ARRAY_SIZE(palmt5_supplicants),
-};
-
-static struct platform_device power_supply = {
- .name = "pda-power",
- .id = -1,
- .dev = {
- .platform_data = &power_supply_info,
- },
-};
-
-/******************************************************************************
- * WM97xx battery
- ******************************************************************************/
-static struct wm97xx_batt_info wm97xx_batt_pdata = {
- .batt_aux = WM97XX_AUX_ID3,
- .temp_aux = WM97XX_AUX_ID2,
- .charge_gpio = -1,
- .max_voltage = PALMT5_BAT_MAX_VOLTAGE,
- .min_voltage = PALMT5_BAT_MIN_VOLTAGE,
- .batt_mult = 1000,
- .batt_div = 414,
- .temp_mult = 1,
- .temp_div = 1,
- .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO,
- .batt_name = "main-batt",
-};
-
-/******************************************************************************
- * aSoC audio
- ******************************************************************************/
-static struct palm27x_asoc_info palmt5_asoc_pdata = {
- .jack_gpio = GPIO_NR_PALMT5_EARPHONE_DETECT,
-};
-
-static pxa2xx_audio_ops_t palmt5_ac97_pdata = {
- .reset_gpio = 95,
-};
-
-static struct platform_device palmt5_asoc = {
- .name = "palm27x-asoc",
- .id = -1,
- .dev = {
- .platform_data = &palmt5_asoc_pdata,
- },
-};
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-static struct pxafb_mode_info palmt5_lcd_modes[] = {
-{
- .pixclock = 57692,
- .xres = 320,
- .yres = 480,
- .bpp = 16,
-
- .left_margin = 32,
- .right_margin = 1,
- .upper_margin = 7,
- .lower_margin = 1,
-
- .hsync_len = 4,
- .vsync_len = 1,
-},
-};
-
-static struct pxafb_mach_info palmt5_lcd_screen = {
- .modes = palmt5_lcd_modes,
- .num_modes = ARRAY_SIZE(palmt5_lcd_modes),
- .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-/******************************************************************************
- * Power management - standby
- ******************************************************************************/
-static void __init palmt5_pm_init(void)
+static void __init palmt5_keys_init(void)
{
- static u32 resume[] = {
- 0xe3a00101, /* mov r0, #0x40000000 */
- 0xe380060f, /* orr r0, r0, #0x00f00000 */
- 0xe590f008, /* ldr pc, [r0, #0x08] */
- };
-
- /* copy the bootloader */
- memcpy(phys_to_virt(PALMT5_STR_BASE), resume, sizeof(resume));
+ platform_device_register(&palmt5_pxa_keys);
}
+#else
+static inline void palmt5_keys_init(void) {}
+#endif
/******************************************************************************
* Machine init
******************************************************************************/
-static struct platform_device *devices[] __initdata = {
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
- &palmt5_pxa_keys,
-#endif
- &palmt5_backlight,
- &power_supply,
- &palmt5_asoc,
- &palmt5_gpio_vbus,
-};
-
-/* setup udc GPIOs initial state */
-static void __init palmt5_udc_init(void)
-{
- if (!gpio_request(GPIO_NR_PALMT5_USB_PULLUP, "UDC Vbus")) {
- gpio_direction_output(GPIO_NR_PALMT5_USB_PULLUP, 1);
- gpio_free(GPIO_NR_PALMT5_USB_PULLUP);
- }
-}
-
static void __init palmt5_reserve(void)
{
memblock_reserve(0xa0200000, 0x1000);
static void __init palmt5_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config));
-
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
- palmt5_pm_init();
- set_pxa_fb_info(&palmt5_lcd_screen);
- pxa_set_mci_info(&palmt5_mci_platform_data);
- palmt5_udc_init();
- pxa_set_ac97_info(&palmt5_ac97_pdata);
- pxa_set_ficp_info(&palmt5_ficp_platform_data);
- pxa_set_keypad_info(&palmt5_keypad_platform_data);
- wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
+ palm27x_mmc_init(GPIO_NR_PALMT5_SD_DETECT_N, GPIO_NR_PALMT5_SD_READONLY,
+ GPIO_NR_PALMT5_SD_POWER, 0);
+ palm27x_pm_init(PALMT5_STR_BASE);
+ palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
+ palm27x_udc_init(GPIO_NR_PALMT5_USB_DETECT_N,
+ GPIO_NR_PALMT5_USB_PULLUP, 1);
+ palm27x_irda_init(GPIO_NR_PALMT5_IR_DISABLE);
+ palm27x_ac97_init(PALMT5_BAT_MIN_VOLTAGE, PALMT5_BAT_MAX_VOLTAGE,
+ GPIO_NR_PALMT5_EARPHONE_DETECT, 95);
+ palm27x_pwm_init(GPIO_NR_PALMT5_BL_POWER, GPIO_NR_PALMT5_LCD_POWER);
+ palm27x_power_init(GPIO_NR_PALMT5_POWER_DETECT, -1);
+ palm27x_pmic_init();
+ palmt5_kpc_init();
+ palmt5_keys_init();
}
MACHINE_START(PALMT5, "Palm Tungsten|T5")
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
+#include <linux/wm97xx.h>
#include <linux/power_supply.h>
#include <linux/usb/gpio_vbus.h>
};
/******************************************************************************
- * WM97xx battery
+ * WM97xx audio, battery
******************************************************************************/
-static struct wm97xx_batt_info wm97xx_batt_pdata = {
+static struct wm97xx_batt_pdata palmte2_batt_pdata = {
.batt_aux = WM97XX_AUX_ID3,
.temp_aux = WM97XX_AUX_ID2,
.charge_gpio = -1,
.batt_name = "main-batt",
};
-/******************************************************************************
- * aSoC audio
- ******************************************************************************/
+static struct wm97xx_pdata palmte2_wm97xx_pdata = {
+ .batt_pdata = &palmte2_batt_pdata,
+};
+
+static pxa2xx_audio_ops_t palmte2_ac97_pdata = {
+ .codec_pdata = { &palmte2_wm97xx_pdata, },
+};
+
static struct palm27x_asoc_info palmte2_asoc_pdata = {
.jack_gpio = GPIO_NR_PALMTE2_EARPHONE_DETECT,
};
set_pxa_fb_info(&palmte2_lcd_screen);
pxa_set_mci_info(&palmte2_mci_platform_data);
palmte2_udc_init();
- pxa_set_ac97_info(NULL);
+ pxa_set_ac97_info(&palmte2_ac97_pdata);
pxa_set_ficp_info(&palmte2_ficp_platform_data);
- wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
#include <linux/power_supply.h>
#include <linux/sysdev.h>
#include <linux/w1-gpio.h>
#include <mach/pxa2xx-regs.h>
#include <mach/palmasoc.h>
#include <mach/camera.h>
+#include <mach/palm27x.h>
#include <sound/pxa2xx-lib.h>
#endif /* CONFIG_MACH_CENTRO */
/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#ifdef CONFIG_MACH_TREO680
-static struct pxamci_platform_data treo680_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .gpio_card_detect = GPIO_NR_TREO_SD_DETECT_N,
- .gpio_card_ro = GPIO_NR_TREO680_SD_READONLY,
- .gpio_power = GPIO_NR_TREO680_SD_POWER,
-};
-#endif /* CONFIG_MACH_TREO680 */
-
-#ifdef CONFIG_MACH_CENTRO
-static struct pxamci_platform_data centro_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .gpio_card_detect = GPIO_NR_TREO_SD_DETECT_N,
- .gpio_card_ro = -1,
- .gpio_power = GPIO_NR_CENTRO_SD_POWER,
- .gpio_power_invert = 1,
-};
-#endif /* CONFIG_MACH_CENTRO */
-
-/******************************************************************************
* GPIO keyboard
******************************************************************************/
-#ifdef CONFIG_MACH_TREO680
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
static unsigned int treo680_matrix_keys[] = {
KEY(0, 0, KEY_F8), /* Red/Off/Power */
KEY(0, 1, KEY_LEFT),
KEY(7, 5, KEY_I),
};
-static struct pxa27x_keypad_platform_data treo680_keypad_platform_data = {
- .matrix_key_rows = 8,
- .matrix_key_cols = 7,
- .matrix_key_map = treo680_matrix_keys,
- .matrix_key_map_size = ARRAY_SIZE(treo680_matrix_keys),
- .direct_key_map = { KEY_CONNECT },
- .direct_key_num = 1,
-
- .debounce_interval = 30,
-};
-#endif /* CONFIG_MACH_TREO680 */
-
-#ifdef CONFIG_MACH_CENTRO
static unsigned int centro_matrix_keys[] = {
KEY(0, 0, KEY_F9), /* Home */
KEY(0, 1, KEY_LEFT),
KEY(7, 5, KEY_I),
};
-static struct pxa27x_keypad_platform_data centro_keypad_platform_data = {
+static struct pxa27x_keypad_platform_data treo680_keypad_pdata = {
.matrix_key_rows = 8,
.matrix_key_cols = 7,
- .matrix_key_map = centro_matrix_keys,
- .matrix_key_map_size = ARRAY_SIZE(centro_matrix_keys),
+ .matrix_key_map = treo680_matrix_keys,
+ .matrix_key_map_size = ARRAY_SIZE(treo680_matrix_keys),
.direct_key_map = { KEY_CONNECT },
.direct_key_num = 1,
.debounce_interval = 30,
};
-#endif /* CONFIG_MACH_CENTRO */
-/******************************************************************************
- * aSoC audio
- ******************************************************************************/
-
-static pxa2xx_audio_ops_t treo_ac97_pdata = {
- .reset_gpio = 95,
-};
-
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-static int treo_backlight_init(struct device *dev)
+static void __init palmtreo_kpc_init(void)
{
- int ret;
-
- ret = gpio_request(GPIO_NR_TREO_BL_POWER, "BL POWER");
- if (ret)
- goto err;
- ret = gpio_direction_output(GPIO_NR_TREO_BL_POWER, 0);
- if (ret)
- goto err2;
-
- return 0;
+ static struct pxa27x_keypad_platform_data *data = &treo680_keypad_pdata;
-err2:
- gpio_free(GPIO_NR_TREO_BL_POWER);
-err:
- return ret;
-}
-
-static int treo_backlight_notify(struct device *dev, int brightness)
-{
- gpio_set_value(GPIO_NR_TREO_BL_POWER, brightness);
- return TREO_MAX_INTENSITY - brightness;
-};
+ if (machine_is_centro()) {
+ data->matrix_key_map = centro_matrix_keys;
+ data->matrix_key_map_size = ARRAY_SIZE(centro_matrix_keys);
+ }
-static void treo_backlight_exit(struct device *dev)
-{
- gpio_free(GPIO_NR_TREO_BL_POWER);
+ pxa_set_keypad_info(&treo680_keypad_pdata);
}
-
-static struct platform_pwm_backlight_data treo_backlight_data = {
- .pwm_id = 0,
- .max_brightness = TREO_MAX_INTENSITY,
- .dft_brightness = TREO_DEFAULT_INTENSITY,
- .pwm_period_ns = TREO_PERIOD_NS,
- .init = treo_backlight_init,
- .notify = treo_backlight_notify,
- .exit = treo_backlight_exit,
-};
-
-static struct platform_device treo_backlight = {
- .name = "pwm-backlight",
- .dev = {
- .parent = &pxa27x_device_pwm0.dev,
- .platform_data = &treo_backlight_data,
- },
-};
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data treo_ficp_info = {
- .gpio_pwdown = GPIO_NR_TREO_IR_EN,
- .transceiver_cap = IR_SIRMODE | IR_OFF,
-};
-
-/******************************************************************************
- * UDC
- ******************************************************************************/
-static struct pxa2xx_udc_mach_info treo_udc_info __initdata = {
- .gpio_vbus = GPIO_NR_TREO_USB_DETECT,
- .gpio_vbus_inverted = 1,
- .gpio_pullup = GPIO_NR_TREO_USB_PULLUP,
-};
-
+#else
+static inline void palmtreo_kpc_init(void) {}
+#endif
/******************************************************************************
* USB host
******************************************************************************/
-#ifdef CONFIG_MACH_TREO680
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static struct pxaohci_platform_data treo680_ohci_info = {
.port_mode = PMM_PERPORT_MODE,
.flags = ENABLE_PORT1 | ENABLE_PORT3,
.power_budget = 0,
};
-#endif /* CONFIG_MACH_TREO680 */
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-static int power_supply_init(struct device *dev)
+static void __init palmtreo_uhc_init(void)
{
- int ret;
-
- ret = gpio_request(GPIO_NR_TREO_POWER_DETECT, "CABLE_STATE_AC");
- if (ret)
- goto err1;
- ret = gpio_direction_input(GPIO_NR_TREO_POWER_DETECT);
- if (ret)
- goto err2;
-
- return 0;
-
-err2:
- gpio_free(GPIO_NR_TREO_POWER_DETECT);
-err1:
- return ret;
-}
-
-static int treo_is_ac_online(void)
-{
- return gpio_get_value(GPIO_NR_TREO_POWER_DETECT);
+ if (machine_is_treo680())
+ pxa_set_ohci_info(&treo680_ohci_info);
}
-
-static void power_supply_exit(struct device *dev)
-{
- gpio_free(GPIO_NR_TREO_POWER_DETECT);
-}
-
-static char *treo_supplicants[] = {
- "main-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
- .init = power_supply_init,
- .is_ac_online = treo_is_ac_online,
- .exit = power_supply_exit,
- .supplied_to = treo_supplicants,
- .num_supplicants = ARRAY_SIZE(treo_supplicants),
-};
-
-static struct platform_device power_supply = {
- .name = "pda-power",
- .id = -1,
- .dev = {
- .platform_data = &power_supply_info,
- },
-};
+#else
+static inline void palmtreo_uhc_init(void) {}
+#endif
/******************************************************************************
* Vibra and LEDs
.num_leds = ARRAY_SIZE(treo680_gpio_leds),
};
-static struct platform_device treo680_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &treo680_gpio_led_info,
- }
-};
-#endif /* CONFIG_MACH_TREO680 */
-
-#ifdef CONFIG_MACH_CENTRO
static struct gpio_led centro_gpio_leds[] = {
{
.name = "centro:vibra:vibra",
.num_leds = ARRAY_SIZE(centro_gpio_leds),
};
-static struct platform_device centro_leds = {
+static struct platform_device palmtreo_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
- .platform_data = ¢ro_gpio_led_info,
+ .platform_data = &treo680_gpio_led_info,
}
};
-#endif /* CONFIG_MACH_CENTRO */
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-/* TODO: add support for 324x324 */
-static struct pxafb_mode_info treo_lcd_modes[] = {
-{
- .pixclock = 86538,
- .xres = 320,
- .yres = 320,
- .bpp = 16,
-
- .left_margin = 20,
- .right_margin = 8,
- .upper_margin = 8,
- .lower_margin = 5,
-
- .hsync_len = 4,
- .vsync_len = 1,
-},
-};
-static void treo_lcd_power(int on, struct fb_var_screeninfo *info)
+static void __init palmtreo_leds_init(void)
{
- gpio_set_value(GPIO_NR_TREO_BL_POWER, on);
-}
-
-static struct pxafb_mach_info treo_lcd_screen = {
- .modes = treo_lcd_modes,
- .num_modes = ARRAY_SIZE(treo_lcd_modes),
- .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
+ if (machine_is_centro())
+ palmtreo_leds.dev.platform_data = ¢ro_gpio_led_info;
-/******************************************************************************
- * Power management - standby
- ******************************************************************************/
-static void __init treo_pm_init(void)
-{
- static u32 resume[] = {
- 0xe3a00101, /* mov r0, #0x40000000 */
- 0xe380060f, /* orr r0, r0, #0x00f00000 */
- 0xe590f008, /* ldr pc, [r0, #0x08] */
- };
-
- /* this is where the bootloader jumps */
- memcpy(phys_to_virt(TREO_STR_BASE), resume, sizeof(resume));
+ platform_device_register(&palmtreo_leds);
}
+#else
+static inline void palmtreo_leds_init(void) {}
+#endif
/******************************************************************************
* Machine init
******************************************************************************/
-static struct platform_device *treo_devices[] __initdata = {
- &treo_backlight,
- &power_supply,
-};
-
-#ifdef CONFIG_MACH_TREO680
-static struct platform_device *treo680_devices[] __initdata = {
- &treo680_leds,
-};
-#endif /* CONFIG_MACH_TREO680 */
-
-#ifdef CONFIG_MACH_CENTRO
-static struct platform_device *centro_devices[] __initdata = {
- ¢ro_leds,
-};
-#endif /* CONFIG_MACH_CENTRO */
-
-/* setup udc GPIOs initial state */
-static void __init treo_udc_init(void)
-{
- if (!gpio_request(GPIO_NR_TREO_USB_PULLUP, "UDC Vbus")) {
- gpio_direction_output(GPIO_NR_TREO_USB_PULLUP, 1);
- gpio_free(GPIO_NR_TREO_USB_PULLUP);
- }
-}
-
-static void __init treo_lcd_power_init(void)
-{
- int ret;
-
- ret = gpio_request(GPIO_NR_TREO_LCD_POWER, "LCD POWER");
- if (ret) {
- pr_err("Treo680: LCD power GPIO request failed!\n");
- return;
- }
-
- ret = gpio_direction_output(GPIO_NR_TREO_LCD_POWER, 0);
- if (ret) {
- pr_err("Treo680: setting LCD power GPIO direction failed!\n");
- gpio_free(GPIO_NR_TREO_LCD_POWER);
- return;
- }
-
- treo_lcd_screen.pxafb_lcd_power = treo_lcd_power;
-}
-
static void __init treo_reserve(void)
{
memblock_reserve(0xa0000000, 0x1000);
memblock_reserve(0xa2000000, 0x1000);
}
-static void __init treo_init(void)
+static void __init palmphone_common_init(void)
{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(treo_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
-
- treo_pm_init();
- pxa2xx_mfp_config(ARRAY_AND_SIZE(treo_pin_config));
- treo_lcd_power_init();
- set_pxa_fb_info(&treo_lcd_screen);
- treo_udc_init();
- pxa_set_udc_info(&treo_udc_info);
- pxa_set_ac97_info(&treo_ac97_pdata);
- pxa_set_ficp_info(&treo_ficp_info);
-
- platform_add_devices(ARRAY_AND_SIZE(treo_devices));
+ palm27x_pm_init(TREO_STR_BASE);
+ palm27x_lcd_init(GPIO_NR_TREO_BL_POWER, &palm_320x320_new_lcd_mode);
+ palm27x_udc_init(GPIO_NR_TREO_USB_DETECT, GPIO_NR_TREO_USB_PULLUP, 1);
+ palm27x_irda_init(GPIO_NR_TREO_IR_EN);
+ palm27x_ac97_init(-1, -1, -1, 95);
+ palm27x_pwm_init(GPIO_NR_TREO_BL_POWER, -1);
+ palm27x_power_init(GPIO_NR_TREO_POWER_DETECT, -1);
+ palm27x_pmic_init();
+ palmtreo_kpc_init();
+ palmtreo_uhc_init();
+ palmtreo_leds_init();
}
-#ifdef CONFIG_MACH_TREO680
static void __init treo680_init(void)
{
- treo_init();
pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
- pxa_set_mci_info(&treo680_mci_platform_data);
- pxa_set_keypad_info(&treo680_keypad_platform_data);
- pxa_set_ohci_info(&treo680_ohci_info);
+ palmphone_common_init();
+ palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, GPIO_NR_TREO680_SD_READONLY,
+ GPIO_NR_TREO680_SD_POWER, 0);
+}
- platform_add_devices(ARRAY_AND_SIZE(treo680_devices));
+static void __init centro_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config));
+ palmphone_common_init();
+ palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, -1,
+ GPIO_NR_CENTRO_SD_POWER, 1);
}
MACHINE_START(TREO680, "Palm Treo 680")
.timer = &pxa_timer,
.init_machine = treo680_init,
MACHINE_END
-#endif /* CONFIG_MACH_TREO680 */
-
-#ifdef CONFIG_MACH_CENTRO
-static void __init centro_init(void)
-{
- treo_init();
- pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config));
- pxa_set_mci_info(¢ro_mci_platform_data);
-
- pxa_set_keypad_info(¢ro_keypad_platform_data);
-
- platform_add_devices(ARRAY_AND_SIZE(centro_devices));
-}
MACHINE_START(CENTRO, "Palm Centro 685")
.phys_io = TREO_PHYS_IO_START,
.reserve = treo_reserve,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
- .init_machine = centro_init,
+ .init_machine = centro_init,
MACHINE_END
-#endif /* CONFIG_MACH_CENTRO */
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
+#include <linux/wm97xx.h>
#include <linux/power_supply.h>
#include <linux/usb/gpio_vbus.h>
#include <linux/mtd/nand.h>
#include <mach/pxa27x_keypad.h>
#include <mach/udc.h>
#include <mach/palmasoc.h>
+#include <mach/palm27x.h>
#include "generic.h"
#include "devices.h"
/******************************************************************************
* NOR Flash
******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
static struct mtd_partition palmtx_partitions[] = {
{
.name = "Flash",
},
};
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-static struct pxamci_platform_data palmtx_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .gpio_card_detect = GPIO_NR_PALMTX_SD_DETECT_N,
- .gpio_card_ro = GPIO_NR_PALMTX_SD_READONLY,
- .gpio_power = GPIO_NR_PALMTX_SD_POWER,
- .detect_delay_ms = 200,
-};
+static void __init palmtx_nor_init(void)
+{
+ platform_device_register(&palmtx_flash);
+}
+#else
+static inline void palmtx_nor_init(void) {}
+#endif
/******************************************************************************
* GPIO keyboard
******************************************************************************/
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
static unsigned int palmtx_matrix_keys[] = {
KEY(0, 0, KEY_POWER),
KEY(0, 1, KEY_F1),
.debounce_interval = 30,
};
+static void __init palmtx_kpc_init(void)
+{
+ pxa_set_keypad_info(&palmtx_keypad_platform_data);
+}
+#else
+static inline void palmtx_kpc_init(void) {}
+#endif
+
/******************************************************************************
* GPIO keys
******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
static struct gpio_keys_button palmtx_pxa_buttons[] = {
{KEY_F8, GPIO_NR_PALMTX_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
};
},
};
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-static int palmtx_backlight_init(struct device *dev)
-{
- int ret;
-
- ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER");
- if (ret)
- goto err;
- ret = gpio_direction_output(GPIO_NR_PALMTX_BL_POWER, 0);
- if (ret)
- goto err2;
- ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER");
- if (ret)
- goto err2;
- ret = gpio_direction_output(GPIO_NR_PALMTX_LCD_POWER, 0);
- if (ret)
- goto err3;
-
- return 0;
-err3:
- gpio_free(GPIO_NR_PALMTX_LCD_POWER);
-err2:
- gpio_free(GPIO_NR_PALMTX_BL_POWER);
-err:
- return ret;
-}
-
-static int palmtx_backlight_notify(struct device *dev, int brightness)
-{
- gpio_set_value(GPIO_NR_PALMTX_BL_POWER, brightness);
- gpio_set_value(GPIO_NR_PALMTX_LCD_POWER, brightness);
- return brightness;
-}
-
-static void palmtx_backlight_exit(struct device *dev)
-{
- gpio_free(GPIO_NR_PALMTX_BL_POWER);
- gpio_free(GPIO_NR_PALMTX_LCD_POWER);
-}
-
-static struct platform_pwm_backlight_data palmtx_backlight_data = {
- .pwm_id = 0,
- .max_brightness = PALMTX_MAX_INTENSITY,
- .dft_brightness = PALMTX_MAX_INTENSITY,
- .pwm_period_ns = PALMTX_PERIOD_NS,
- .init = palmtx_backlight_init,
- .notify = palmtx_backlight_notify,
- .exit = palmtx_backlight_exit,
-};
-
-static struct platform_device palmtx_backlight = {
- .name = "pwm-backlight",
- .dev = {
- .parent = &pxa27x_device_pwm0.dev,
- .platform_data = &palmtx_backlight_data,
- },
-};
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data palmtx_ficp_platform_data = {
- .gpio_pwdown = GPIO_NR_PALMTX_IR_DISABLE,
- .transceiver_cap = IR_SIRMODE | IR_OFF,
-};
-
-/******************************************************************************
- * UDC
- ******************************************************************************/
-static struct gpio_vbus_mach_info palmtx_udc_info = {
- .gpio_vbus = GPIO_NR_PALMTX_USB_DETECT_N,
- .gpio_vbus_inverted = 1,
- .gpio_pullup = GPIO_NR_PALMTX_USB_PULLUP,
-};
-
-static struct platform_device palmtx_gpio_vbus = {
- .name = "gpio-vbus",
- .id = -1,
- .dev = {
- .platform_data = &palmtx_udc_info,
- },
-};
-
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-static int power_supply_init(struct device *dev)
-{
- int ret;
-
- ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT, "CABLE_STATE_AC");
- if (ret)
- goto err1;
- ret = gpio_direction_input(GPIO_NR_PALMTX_POWER_DETECT);
- if (ret)
- goto err2;
-
- return 0;
-
-err2:
- gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
-err1:
- return ret;
-}
-
-static int palmtx_is_ac_online(void)
-{
- return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT);
-}
-
-static void power_supply_exit(struct device *dev)
+static void __init palmtx_keys_init(void)
{
- gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
+ platform_device_register(&palmtx_pxa_keys);
}
-
-static char *palmtx_supplicants[] = {
- "main-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
- .init = power_supply_init,
- .is_ac_online = palmtx_is_ac_online,
- .exit = power_supply_exit,
- .supplied_to = palmtx_supplicants,
- .num_supplicants = ARRAY_SIZE(palmtx_supplicants),
-};
-
-static struct platform_device power_supply = {
- .name = "pda-power",
- .id = -1,
- .dev = {
- .platform_data = &power_supply_info,
- },
-};
-
-/******************************************************************************
- * WM97xx battery
- ******************************************************************************/
-static struct wm97xx_batt_info wm97xx_batt_pdata = {
- .batt_aux = WM97XX_AUX_ID3,
- .temp_aux = WM97XX_AUX_ID2,
- .charge_gpio = -1,
- .max_voltage = PALMTX_BAT_MAX_VOLTAGE,
- .min_voltage = PALMTX_BAT_MIN_VOLTAGE,
- .batt_mult = 1000,
- .batt_div = 414,
- .temp_mult = 1,
- .temp_div = 1,
- .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO,
- .batt_name = "main-batt",
-};
-
-/******************************************************************************
- * aSoC audio
- ******************************************************************************/
-static struct palm27x_asoc_info palmtx_asoc_pdata = {
- .jack_gpio = GPIO_NR_PALMTX_EARPHONE_DETECT,
-};
-
-static pxa2xx_audio_ops_t palmtx_ac97_pdata = {
- .reset_gpio = 95,
-};
-
-static struct platform_device palmtx_asoc = {
- .name = "palm27x-asoc",
- .id = -1,
- .dev = {
- .platform_data = &palmtx_asoc_pdata,
- },
-};
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-static struct pxafb_mode_info palmtx_lcd_modes[] = {
-{
- .pixclock = 57692,
- .xres = 320,
- .yres = 480,
- .bpp = 16,
-
- .left_margin = 32,
- .right_margin = 1,
- .upper_margin = 7,
- .lower_margin = 1,
-
- .hsync_len = 4,
- .vsync_len = 1,
-},
-};
-
-static struct pxafb_mach_info palmtx_lcd_screen = {
- .modes = palmtx_lcd_modes,
- .num_modes = ARRAY_SIZE(palmtx_lcd_modes),
- .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
+#else
+static inline void palmtx_keys_init(void) {}
+#endif
/******************************************************************************
* NAND Flash
******************************************************************************/
+#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE)
static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
unsigned int ctrl)
{
}
};
-/******************************************************************************
- * Power management - standby
- ******************************************************************************/
-static void __init palmtx_pm_init(void)
+static void __init palmtx_nand_init(void)
{
- static u32 resume[] = {
- 0xe3a00101, /* mov r0, #0x40000000 */
- 0xe380060f, /* orr r0, r0, #0x00f00000 */
- 0xe590f008, /* ldr pc, [r0, #0x08] */
- };
-
- /* copy the bootloader */
- memcpy(phys_to_virt(PALMTX_STR_BASE), resume, sizeof(resume));
+ platform_device_register(&palmtx_nand);
}
+#else
+static inline void palmtx_nand_init(void) {}
+#endif
/******************************************************************************
* Machine init
******************************************************************************/
-static struct platform_device *devices[] __initdata = {
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
- &palmtx_pxa_keys,
-#endif
- &palmtx_backlight,
- &power_supply,
- &palmtx_asoc,
- &palmtx_gpio_vbus,
- &palmtx_flash,
- &palmtx_nand,
-};
-
static struct map_desc palmtx_io_desc[] __initdata = {
{
.virtual = PALMTX_PCMCIA_VIRT,
iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
}
-/* setup udc GPIOs initial state */
-static void __init palmtx_udc_init(void)
-{
- if (!gpio_request(GPIO_NR_PALMTX_USB_PULLUP, "UDC Vbus")) {
- gpio_direction_output(GPIO_NR_PALMTX_USB_PULLUP, 1);
- gpio_free(GPIO_NR_PALMTX_USB_PULLUP);
- }
-}
-
-
static void __init palmtx_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
-
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
- palmtx_pm_init();
- set_pxa_fb_info(&palmtx_lcd_screen);
- pxa_set_mci_info(&palmtx_mci_platform_data);
- palmtx_udc_init();
- pxa_set_ac97_info(&palmtx_ac97_pdata);
- pxa_set_ficp_info(&palmtx_ficp_platform_data);
- pxa_set_keypad_info(&palmtx_keypad_platform_data);
- wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
+ palm27x_mmc_init(GPIO_NR_PALMTX_SD_DETECT_N, GPIO_NR_PALMTX_SD_READONLY,
+ GPIO_NR_PALMTX_SD_POWER, 0);
+ palm27x_pm_init(PALMTX_STR_BASE);
+ palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
+ palm27x_udc_init(GPIO_NR_PALMTX_USB_DETECT_N,
+ GPIO_NR_PALMTX_USB_PULLUP, 1);
+ palm27x_irda_init(GPIO_NR_PALMTX_IR_DISABLE);
+ palm27x_ac97_init(PALMTX_BAT_MIN_VOLTAGE, PALMTX_BAT_MAX_VOLTAGE,
+ GPIO_NR_PALMTX_EARPHONE_DETECT, 95);
+ palm27x_pwm_init(GPIO_NR_PALMTX_BL_POWER, GPIO_NR_PALMTX_LCD_POWER);
+ palm27x_power_init(GPIO_NR_PALMTX_POWER_DETECT, -1);
+ palm27x_pmic_init();
+ palmtx_kpc_init();
+ palmtx_keys_init();
+ palmtx_nor_init();
+ palmtx_nand_init();
}
MACHINE_START(PALMTX, "Palm T|X")
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
+#include <linux/wm97xx.h>
#include <linux/power_supply.h>
#include <linux/usb/gpio_vbus.h>
#include <mach/pxa27x_keypad.h>
#include <mach/udc.h>
#include <mach/palmasoc.h>
+#include <mach/palm27x.h>
#include <mach/pm.h>
};
/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-/* SD_POWER is not actually power, but it is more like chip
- * select, i.e. it is inverted */
-static struct pxamci_platform_data palmz72_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .gpio_card_detect = GPIO_NR_PALMZ72_SD_DETECT_N,
- .gpio_card_ro = GPIO_NR_PALMZ72_SD_RO,
- .gpio_power = GPIO_NR_PALMZ72_SD_POWER_N,
- .gpio_power_invert = 1,
-};
-
-/******************************************************************************
* GPIO keyboard
******************************************************************************/
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
static unsigned int palmz72_matrix_keys[] = {
KEY(0, 0, KEY_POWER),
KEY(0, 1, KEY_F1),
.debounce_interval = 30,
};
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-static int palmz72_backlight_init(struct device *dev)
+static void __init palmz72_kpc_init(void)
{
- int ret;
-
- ret = gpio_request(GPIO_NR_PALMZ72_BL_POWER, "BL POWER");
- if (ret)
- goto err;
- ret = gpio_direction_output(GPIO_NR_PALMZ72_BL_POWER, 0);
- if (ret)
- goto err2;
- ret = gpio_request(GPIO_NR_PALMZ72_LCD_POWER, "LCD POWER");
- if (ret)
- goto err2;
- ret = gpio_direction_output(GPIO_NR_PALMZ72_LCD_POWER, 0);
- if (ret)
- goto err3;
-
- return 0;
-err3:
- gpio_free(GPIO_NR_PALMZ72_LCD_POWER);
-err2:
- gpio_free(GPIO_NR_PALMZ72_BL_POWER);
-err:
- return ret;
-}
-
-static int palmz72_backlight_notify(struct device *dev, int brightness)
-{
- gpio_set_value(GPIO_NR_PALMZ72_BL_POWER, brightness);
- gpio_set_value(GPIO_NR_PALMZ72_LCD_POWER, brightness);
- return brightness;
-}
-
-static void palmz72_backlight_exit(struct device *dev)
-{
- gpio_free(GPIO_NR_PALMZ72_BL_POWER);
- gpio_free(GPIO_NR_PALMZ72_LCD_POWER);
+ pxa_set_keypad_info(&palmz72_keypad_platform_data);
}
-
-static struct platform_pwm_backlight_data palmz72_backlight_data = {
- .pwm_id = 0,
- .max_brightness = PALMZ72_MAX_INTENSITY,
- .dft_brightness = PALMZ72_MAX_INTENSITY,
- .pwm_period_ns = PALMZ72_PERIOD_NS,
- .init = palmz72_backlight_init,
- .notify = palmz72_backlight_notify,
- .exit = palmz72_backlight_exit,
-};
-
-static struct platform_device palmz72_backlight = {
- .name = "pwm-backlight",
- .dev = {
- .parent = &pxa27x_device_pwm0.dev,
- .platform_data = &palmz72_backlight_data,
- },
-};
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data palmz72_ficp_platform_data = {
- .gpio_pwdown = GPIO_NR_PALMZ72_IR_DISABLE,
- .transceiver_cap = IR_SIRMODE | IR_OFF,
-};
+#else
+static inline void palmz72_kpc_init(void) {}
+#endif
/******************************************************************************
* LEDs
******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
static struct gpio_led gpio_leds[] = {
{
.name = "palmz72:green:led",
}
};
-/******************************************************************************
- * UDC
- ******************************************************************************/
-static struct gpio_vbus_mach_info palmz72_udc_info = {
- .gpio_vbus = GPIO_NR_PALMZ72_USB_DETECT_N,
- .gpio_pullup = GPIO_NR_PALMZ72_USB_PULLUP,
-};
-
-static struct platform_device palmz72_gpio_vbus = {
- .name = "gpio-vbus",
- .id = -1,
- .dev = {
- .platform_data = &palmz72_udc_info,
- },
-};
-
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-static int power_supply_init(struct device *dev)
-{
- int ret;
-
- ret = gpio_request(GPIO_NR_PALMZ72_POWER_DETECT, "CABLE_STATE_AC");
- if (ret)
- goto err1;
- ret = gpio_direction_input(GPIO_NR_PALMZ72_POWER_DETECT);
- if (ret)
- goto err2;
-
- ret = gpio_request(GPIO_NR_PALMZ72_USB_DETECT_N, "CABLE_STATE_USB");
- if (ret)
- goto err2;
- ret = gpio_direction_input(GPIO_NR_PALMZ72_USB_DETECT_N);
- if (ret)
- goto err3;
-
- return 0;
-err3:
- gpio_free(GPIO_NR_PALMZ72_USB_DETECT_N);
-err2:
- gpio_free(GPIO_NR_PALMZ72_POWER_DETECT);
-err1:
- return ret;
-}
-
-static int palmz72_is_ac_online(void)
-{
- return gpio_get_value(GPIO_NR_PALMZ72_POWER_DETECT);
-}
-
-static int palmz72_is_usb_online(void)
+static void __init palmz72_leds_init(void)
{
- return !gpio_get_value(GPIO_NR_PALMZ72_USB_DETECT_N);
+ platform_device_register(&palmz72_leds);
}
-
-static void power_supply_exit(struct device *dev)
-{
- gpio_free(GPIO_NR_PALMZ72_USB_DETECT_N);
- gpio_free(GPIO_NR_PALMZ72_POWER_DETECT);
-}
-
-static char *palmz72_supplicants[] = {
- "main-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
- .init = power_supply_init,
- .is_ac_online = palmz72_is_ac_online,
- .is_usb_online = palmz72_is_usb_online,
- .exit = power_supply_exit,
- .supplied_to = palmz72_supplicants,
- .num_supplicants = ARRAY_SIZE(palmz72_supplicants),
-};
-
-static struct platform_device power_supply = {
- .name = "pda-power",
- .id = -1,
- .dev = {
- .platform_data = &power_supply_info,
- },
-};
-
-/******************************************************************************
- * WM97xx battery
- ******************************************************************************/
-static struct wm97xx_batt_info wm97xx_batt_pdata = {
- .batt_aux = WM97XX_AUX_ID3,
- .temp_aux = WM97XX_AUX_ID2,
- .charge_gpio = -1,
- .max_voltage = PALMZ72_BAT_MAX_VOLTAGE,
- .min_voltage = PALMZ72_BAT_MIN_VOLTAGE,
- .batt_mult = 1000,
- .batt_div = 414,
- .temp_mult = 1,
- .temp_div = 1,
- .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO,
- .batt_name = "main-batt",
-};
-
-/******************************************************************************
- * aSoC audio
- ******************************************************************************/
-static struct platform_device palmz72_asoc = {
- .name = "palm27x-asoc",
- .id = -1,
-};
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-static struct pxafb_mode_info palmz72_lcd_modes[] = {
-{
- .pixclock = 115384,
- .xres = 320,
- .yres = 320,
- .bpp = 16,
-
- .left_margin = 27,
- .right_margin = 7,
- .upper_margin = 7,
- .lower_margin = 8,
-
- .hsync_len = 6,
- .vsync_len = 1,
-},
-};
-
-static struct pxafb_mach_info palmz72_lcd_screen = {
- .modes = palmz72_lcd_modes,
- .num_modes = ARRAY_SIZE(palmz72_lcd_modes),
- .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
+#else
+static inline void palmz72_leds_init(void) {}
+#endif
#ifdef CONFIG_PM
/******************************************************************************
* Machine init
******************************************************************************/
-static struct platform_device *devices[] __initdata = {
- &palmz72_backlight,
- &palmz72_leds,
- &palmz72_asoc,
- &power_supply,
- &palmz72_gpio_vbus,
-};
-
-/* setup udc GPIOs initial state */
-static void __init palmz72_udc_init(void)
-{
- if (!gpio_request(GPIO_NR_PALMZ72_USB_PULLUP, "USB Pullup")) {
- gpio_direction_output(GPIO_NR_PALMZ72_USB_PULLUP, 0);
- gpio_free(GPIO_NR_PALMZ72_USB_PULLUP);
- }
-}
-
static void __init palmz72_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmz72_pin_config));
-
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
- set_pxa_fb_info(&palmz72_lcd_screen);
- pxa_set_mci_info(&palmz72_mci_platform_data);
- palmz72_udc_init();
- pxa_set_ac97_info(NULL);
- pxa_set_ficp_info(&palmz72_ficp_platform_data);
- pxa_set_keypad_info(&palmz72_keypad_platform_data);
- wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
+ palm27x_mmc_init(GPIO_NR_PALMZ72_SD_DETECT_N, GPIO_NR_PALMZ72_SD_RO,
+ GPIO_NR_PALMZ72_SD_POWER_N, 1);
+ palm27x_lcd_init(-1, &palm_320x320_lcd_mode);
+ palm27x_udc_init(GPIO_NR_PALMZ72_USB_DETECT_N,
+ GPIO_NR_PALMZ72_USB_PULLUP, 0);
+ palm27x_irda_init(GPIO_NR_PALMZ72_IR_DISABLE);
+ palm27x_ac97_init(PALMZ72_BAT_MIN_VOLTAGE, PALMZ72_BAT_MAX_VOLTAGE,
+ -1, 113);
+ palm27x_pwm_init(-1, -1);
+ palm27x_power_init(-1, -1);
+ palm27x_pmic_init();
+ palmz72_kpc_init();
+ palmz72_leds_init();
}
MACHINE_START(PALMZ72, "Palm Zire72")
#include <mach/irda.h>
#include <mach/poodle.h>
#include <mach/pxafb.h>
-#include <mach/sharpsl.h>
#include <mach/pxa2xx_spi.h>
#include <plat/i2c.h>
#include "generic.h"
#include "devices.h"
-#include "sharpsl.h"
static unsigned long poodle_pin_config[] __initdata = {
/* I/O */
static struct platform_device *pxa25x_devices[] __initdata = {
&pxa25x_device_udc,
+ &pxa_device_pmu,
&pxa_device_i2s,
&sa1100_device_rtc,
&pxa25x_device_ssp,
static struct platform_device *devices[] __initdata = {
&pxa27x_device_udc,
+ &pxa_device_pmu,
&pxa_device_i2s,
&sa1100_device_rtc,
&pxa_device_rtc,
static unsigned char smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, };
/* crystal frequency to HSIO bus frequency multiplier (HSS) */
-static unsigned char hss_mult[4] = { 8, 12, 16, 0 };
+static unsigned char hss_mult[4] = { 8, 12, 16, 24 };
/*
* Get the clock frequency as reflected by CCSR and the turbo flag.
PECR |= PECR_IE(irq - IRQ_WAKEUP0);
}
+static int pxa_set_ext_wakeup_type(unsigned int irq, unsigned int flow_type)
+{
+ if (flow_type & IRQ_TYPE_EDGE_RISING)
+ PWER |= 1 << (irq - IRQ_WAKEUP0);
+
+ if (flow_type & IRQ_TYPE_EDGE_FALLING)
+ PWER |= 1 << (irq - IRQ_WAKEUP0 + 2);
+
+ return 0;
+}
+
static struct irq_chip pxa_ext_wakeup_chip = {
.name = "WAKEUP",
.ack = pxa_ack_ext_wakeup,
.mask = pxa_mask_ext_wakeup,
.unmask = pxa_unmask_ext_wakeup,
+ .set_type = pxa_set_ext_wakeup_type,
};
static void __init pxa_init_ext_wakeup_irq(set_wake_t fn)
static struct platform_device *devices[] __initdata = {
&pxa27x_device_udc,
+ &pxa_device_pmu,
&pxa_device_i2s,
&sa1100_device_rtc,
&pxa_device_rtc,
static char *raumfeld_power_supplicants[] = { "ds2760-battery.0" };
+static void raumfeld_power_signal_charged(void)
+{
+ struct power_supply *psy =
+ power_supply_get_by_name(raumfeld_power_supplicants[0]);
+
+ if (psy)
+ power_supply_set_battery_charged(psy);
+}
+
+static int raumfeld_power_resume(void)
+{
+ /* check if GPIO_CHARGE_DONE went low while we were sleeping */
+ if (!gpio_get_value(GPIO_CHARGE_DONE))
+ raumfeld_power_signal_charged();
+
+ return 0;
+}
+
static struct pda_power_pdata power_supply_info = {
.init = power_supply_init,
.is_ac_online = raumfeld_is_ac_online,
.is_usb_online = raumfeld_is_usb_online,
.exit = power_supply_exit,
.supplied_to = raumfeld_power_supplicants,
- .num_supplicants = ARRAY_SIZE(raumfeld_power_supplicants)
+ .num_supplicants = ARRAY_SIZE(raumfeld_power_supplicants),
+ .resume = raumfeld_power_resume,
};
static struct resource power_supply_resources[] = {
static irqreturn_t charge_done_irq(int irq, void *dev_id)
{
- struct power_supply *psy;
-
- psy = power_supply_get_by_name("ds2760-battery.0");
-
- if (psy)
- power_supply_set_battery_charged(psy);
-
+ raumfeld_power_signal_charged();
return IRQ_HANDLED;
}
+++ /dev/null
-/*
- * Copyright (c) 2004-2005 Richard Purdie
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <mach/sharpsl_pm.h>
-
-/*
- * SharpSL Battery/PM Driver
- */
-#define READ_GPIO_BIT(x) (GPLR(x) & GPIO_bit(x))
-
-/* MAX1111 Channel Definitions */
-#define MAX1111_BATT_VOLT 4u
-#define MAX1111_BATT_TEMP 2u
-#define MAX1111_ACIN_VOLT 6u
-
-extern struct battery_thresh sharpsl_battery_levels_acin[];
-extern struct battery_thresh sharpsl_battery_levels_noac[];
-int sharpsl_pm_pxa_read_max1111(int channel);
-
-
#include <mach/pm.h>
#include <mach/pxa2xx-regs.h>
#include <mach/regs-rtc.h>
-#include <mach/sharpsl.h>
#include <mach/sharpsl_pm.h>
-#include "sharpsl.h"
-
/*
* Constants
*/
if (machine_is_tosa())
return 0;
-#ifdef CONFIG_CORGI_SSP_DEPRECATED
- return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1
- | MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR);
-#else
extern int max1111_read_channel(int);
/* max1111 accepts channels from 0-3, however,
* it is encoded from 0-7 here in the code.
*/
return max1111_read_channel(channel >> 1);
-#endif
}
static int get_percentage(int voltage)
dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
-#ifdef CONFIG_BACKLIGHT_CORGI
- /* If battery is low. limit backlight intensity to save power. */
- if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
- && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW)
- || (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
- if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
- sharpsl_pm.machinfo->backlight_limit(1);
- sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
- }
- } else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) {
- sharpsl_pm.machinfo->backlight_limit(0);
- sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
- }
-#endif
-
/* Suspend if critical battery level */
if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
&& (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs
mcr p15, 0, r1, c7, c7, 0 @ invalidate I & D caches, BTB
-#ifdef CONFIG_XSCALE_CACHE_ERRATA
- bic r9, r9, #0x0004 @ see cpu_xscale_proc_init
-#endif
-
mcr p14, 0, r3, c6, c0, 0 @ clock configuration, turbo mode.
mcr p15, 0, r4, c15, c1, 0 @ CP access reg
mcr p15, 0, r5, c13, c0, 0 @ PID
.text
resume_after_mmu:
-#ifdef CONFIG_XSCALE_CACHE_ERRATA
- bl cpu_xscale_proc_init
-#endif
ldmfd sp!, {r2, r3}
#ifndef CONFIG_IWMMXT
mar acc0, r2, r3
#include <linux/gpio_keys.h>
#include <linux/gpio.h>
#include <linux/leds.h>
-#include <linux/mtd/physmap.h>
#include <linux/i2c.h>
#include <linux/i2c/pca953x.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/spi/corgi_lcd.h>
+#include <linux/mtd/physmap.h>
#include <linux/mtd/sharpsl.h>
#include <linux/input/matrix_keypad.h>
+#include <linux/regulator/machine.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/sharpsl_param.h>
#include <asm/hardware/scoop.h>
-
#include <mach/pxa27x.h>
#include <mach/pxa27x-udc.h>
#include <mach/reset.h>
-#include <plat/i2c.h>
#include <mach/irda.h>
#include <mach/mmc.h>
#include <mach/ohci.h>
#include <mach/pxafb.h>
#include <mach/pxa2xx_spi.h>
#include <mach/spitz.h>
+#include <mach/sharpsl_pm.h>
+
+#include <plat/i2c.h>
#include "generic.h"
#include "devices.h"
-#include "sharpsl.h"
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
static unsigned long spitz_pin_config[] __initdata = {
/* Chip Selects */
GPIO78_nCS_2, /* SCOOP #2 */
GPIO1_GPIO | WAKEUP_ON_EDGE_FALL, /* SPITZ_GPIO_RESET */
};
-/*
- * Spitz SCOOP Device #1
- */
-static struct resource spitz_scoop_resources[] = {
+
+/******************************************************************************
+ * Scoop GPIO expander
+ ******************************************************************************/
+#if defined(CONFIG_SHARP_SCOOP) || defined(CONFIG_SHARP_SCOOP_MODULE)
+/* SCOOP Device #1 */
+static struct resource spitz_scoop_1_resources[] = {
[0] = {
.start = 0x10800000,
.end = 0x10800fff,
},
};
-static struct scoop_config spitz_scoop_setup = {
+static struct scoop_config spitz_scoop_1_setup = {
.io_dir = SPITZ_SCP_IO_DIR,
.io_out = SPITZ_SCP_IO_OUT,
.suspend_clr = SPITZ_SCP_SUS_CLR,
.gpio_base = SPITZ_SCP_GPIO_BASE,
};
-struct platform_device spitzscoop_device = {
+struct platform_device spitz_scoop_1_device = {
.name = "sharp-scoop",
.id = 0,
.dev = {
- .platform_data = &spitz_scoop_setup,
+ .platform_data = &spitz_scoop_1_setup,
},
- .num_resources = ARRAY_SIZE(spitz_scoop_resources),
- .resource = spitz_scoop_resources,
+ .num_resources = ARRAY_SIZE(spitz_scoop_1_resources),
+ .resource = spitz_scoop_1_resources,
};
-/*
- * Spitz SCOOP Device #2
- */
-static struct resource spitz_scoop2_resources[] = {
+/* SCOOP Device #2 */
+static struct resource spitz_scoop_2_resources[] = {
[0] = {
.start = 0x08800040,
.end = 0x08800fff,
},
};
-static struct scoop_config spitz_scoop2_setup = {
+static struct scoop_config spitz_scoop_2_setup = {
.io_dir = SPITZ_SCP2_IO_DIR,
.io_out = SPITZ_SCP2_IO_OUT,
.suspend_clr = SPITZ_SCP2_SUS_CLR,
.gpio_base = SPITZ_SCP2_GPIO_BASE,
};
-struct platform_device spitzscoop2_device = {
+struct platform_device spitz_scoop_2_device = {
.name = "sharp-scoop",
.id = 1,
.dev = {
- .platform_data = &spitz_scoop2_setup,
+ .platform_data = &spitz_scoop_2_setup,
},
- .num_resources = ARRAY_SIZE(spitz_scoop2_resources),
- .resource = spitz_scoop2_resources,
+ .num_resources = ARRAY_SIZE(spitz_scoop_2_resources),
+ .resource = spitz_scoop_2_resources,
};
-#define SPITZ_PWR_SD 0x01
-#define SPITZ_PWR_CF 0x02
+static void __init spitz_scoop_init(void)
+{
+ platform_device_register(&spitz_scoop_1_device);
+
+ /* Akita doesn't have the second SCOOP chip */
+ if (!machine_is_akita())
+ platform_device_register(&spitz_scoop_2_device);
+}
/* Power control is shared with between one of the CF slots and SD */
-static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr)
+static void spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr)
{
- unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR);
+ unsigned short cpr;
+ unsigned long flags;
- if (new_cpr & 0x0007) {
+ if (new_cpr & 0x7) {
gpio_set_value(SPITZ_GPIO_CF_POWER, 1);
- if (!(cpr & 0x0002) && !(cpr & 0x0004))
- mdelay(5);
- if (device == SPITZ_PWR_CF)
- cpr |= 0x0002;
- if (device == SPITZ_PWR_SD)
- cpr |= 0x0004;
- write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
- } else {
- if (device == SPITZ_PWR_CF)
- cpr &= ~0x0002;
- if (device == SPITZ_PWR_SD)
- cpr &= ~0x0004;
- if (!(cpr & 0x0002) && !(cpr & 0x0004)) {
- write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, 0x0000);
- mdelay(1);
- gpio_set_value(SPITZ_GPIO_CF_POWER, 0);
- } else {
- write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
- }
+ mdelay(5);
+ }
+
+ local_irq_save(flags);
+
+ cpr = read_scoop_reg(&spitz_scoop_1_device.dev, SCOOP_CPR);
+
+ if (enable & new_cpr)
+ cpr |= new_cpr;
+ else
+ cpr &= ~enable;
+
+ write_scoop_reg(&spitz_scoop_1_device.dev, SCOOP_CPR, cpr);
+
+ local_irq_restore(flags);
+
+ if (!(cpr & 0x7)) {
+ mdelay(1);
+ gpio_set_value(SPITZ_GPIO_CF_POWER, 0);
}
}
-static void spitz_pcmcia_pwr(struct device *scoop, unsigned short cpr, int nr)
+#else
+static inline void spitz_scoop_init(void) {}
+static inline void spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr) {}
+#endif
+
+/******************************************************************************
+ * PCMCIA
+ ******************************************************************************/
+#if defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE)
+static void spitz_pcmcia_pwr(struct device *scoop, uint16_t cpr, int nr)
{
/* Only need to override behaviour for slot 0 */
if (nr == 0)
- spitz_card_pwr_ctrl(SPITZ_PWR_CF, cpr);
+ spitz_card_pwr_ctrl(
+ cpr & (SCOOP_CPR_CF_3V | SCOOP_CPR_CF_XV), cpr);
else
write_scoop_reg(scoop, SCOOP_CPR, cpr);
}
static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = {
-{
- .dev = &spitzscoop_device.dev,
- .irq = SPITZ_IRQ_GPIO_CF_IRQ,
- .cd_irq = SPITZ_IRQ_GPIO_CF_CD,
- .cd_irq_str = "PCMCIA0 CD",
-},{
- .dev = &spitzscoop2_device.dev,
- .irq = SPITZ_IRQ_GPIO_CF2_IRQ,
- .cd_irq = -1,
-},
+ {
+ .dev = &spitz_scoop_1_device.dev,
+ .irq = SPITZ_IRQ_GPIO_CF_IRQ,
+ .cd_irq = SPITZ_IRQ_GPIO_CF_CD,
+ .cd_irq_str = "PCMCIA0 CD",
+ }, {
+ .dev = &spitz_scoop_2_device.dev,
+ .irq = SPITZ_IRQ_GPIO_CF2_IRQ,
+ .cd_irq = -1,
+ },
};
static struct scoop_pcmcia_config spitz_pcmcia_config = {
- .devs = &spitz_pcmcia_scoop[0],
- .num_devs = 2,
- .power_ctrl = spitz_pcmcia_pwr,
+ .devs = &spitz_pcmcia_scoop[0],
+ .num_devs = 2,
+ .power_ctrl = spitz_pcmcia_pwr,
};
-EXPORT_SYMBOL(spitzscoop_device);
-EXPORT_SYMBOL(spitzscoop2_device);
+static void __init spitz_pcmcia_init(void)
+{
+ /* Akita has only one PCMCIA slot used */
+ if (machine_is_akita())
+ spitz_pcmcia_config.num_devs = 1;
+
+ platform_scoop_config = &spitz_pcmcia_config;
+}
+#else
+static inline void spitz_pcmcia_init(void) {}
+#endif
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
-/*
- * Spitz Keyboard Device
- */
#define SPITZ_KEY_CALENDAR KEY_F1
#define SPITZ_KEY_ADDRESS KEY_F2
#define SPITZ_KEY_FN KEY_F3
#define SPITZ_KEY_OK KEY_F11
#define SPITZ_KEY_MENU KEY_F12
-static const uint32_t spitzkbd_keymap[] = {
+static const uint32_t spitz_keymap[] = {
KEY(0, 0, KEY_LEFTCTRL),
KEY(0, 1, KEY_1),
KEY(0, 2, KEY_3),
KEY(6, 8, KEY_RIGHT),
};
-static const struct matrix_keymap_data spitzkbd_keymap_data = {
- .keymap = spitzkbd_keymap,
- .keymap_size = ARRAY_SIZE(spitzkbd_keymap),
+static const struct matrix_keymap_data spitz_keymap_data = {
+ .keymap = spitz_keymap,
+ .keymap_size = ARRAY_SIZE(spitz_keymap),
};
-static const uint32_t spitzkbd_row_gpios[] =
+static const uint32_t spitz_row_gpios[] =
{ 12, 17, 91, 34, 36, 38, 39 };
-static const uint32_t spitzkbd_col_gpios[] =
+static const uint32_t spitz_col_gpios[] =
{ 88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114 };
-static struct matrix_keypad_platform_data spitzkbd_pdata = {
- .keymap_data = &spitzkbd_keymap_data,
- .row_gpios = spitzkbd_row_gpios,
- .col_gpios = spitzkbd_col_gpios,
- .num_row_gpios = ARRAY_SIZE(spitzkbd_row_gpios),
- .num_col_gpios = ARRAY_SIZE(spitzkbd_col_gpios),
+static struct matrix_keypad_platform_data spitz_mkp_pdata = {
+ .keymap_data = &spitz_keymap_data,
+ .row_gpios = spitz_row_gpios,
+ .col_gpios = spitz_col_gpios,
+ .num_row_gpios = ARRAY_SIZE(spitz_row_gpios),
+ .num_col_gpios = ARRAY_SIZE(spitz_col_gpios),
.col_scan_delay_us = 10,
.debounce_ms = 10,
.wakeup = 1,
};
-static struct platform_device spitzkbd_device = {
+static struct platform_device spitz_mkp_device = {
.name = "matrix-keypad",
.id = -1,
.dev = {
- .platform_data = &spitzkbd_pdata,
+ .platform_data = &spitz_mkp_pdata,
},
};
+static void __init spitz_mkp_init(void)
+{
+ platform_device_register(&spitz_mkp_device);
+}
+#else
+static inline void spitz_mkp_init(void) {}
+#endif
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
static struct gpio_keys_button spitz_gpio_keys[] = {
{
.type = EV_PWR,
},
};
+static void __init spitz_keys_init(void)
+{
+ platform_device_register(&spitz_gpio_keys_device);
+}
+#else
+static inline void spitz_keys_init(void) {}
+#endif
-/*
- * Spitz LEDs
- */
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
static struct gpio_led spitz_gpio_leds[] = {
{
.name = "spitz:amber:charge",
.num_leds = ARRAY_SIZE(spitz_gpio_leds),
};
-static struct platform_device spitzled_device = {
+static struct platform_device spitz_led_device = {
.name = "leds-gpio",
.id = -1,
.dev = {
- .platform_data = &spitz_gpio_leds_info,
+ .platform_data = &spitz_gpio_leds_info,
},
};
-#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static struct pxa2xx_spi_master spitz_spi_info = {
- .num_chipselect = 3,
-};
+static void __init spitz_leds_init(void)
+{
+ platform_device_register(&spitz_led_device);
+}
+#else
+static inline void spitz_leds_init(void) {}
+#endif
-static void spitz_wait_for_hsync(void)
+/******************************************************************************
+ * SSP Devices
+ ******************************************************************************/
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static void spitz_ads7846_wait_for_hsync(void)
{
while (gpio_get_value(SPITZ_GPIO_HSYNC))
cpu_relax();
.y_plate_ohms = 486,
.pressure_max = 1024,
.gpio_pendown = SPITZ_GPIO_TP_INT,
- .wait_for_sync = spitz_wait_for_hsync,
+ .wait_for_sync = spitz_ads7846_wait_for_hsync,
};
static struct pxa2xx_spi_chip spitz_ads7846_chip = {
static struct spi_board_info spitz_spi_devices[] = {
{
- .modalias = "ads7846",
- .max_speed_hz = 1200000,
- .bus_num = 2,
- .chip_select = 0,
- .platform_data = &spitz_ads7846_info,
- .controller_data= &spitz_ads7846_chip,
- .irq = gpio_to_irq(SPITZ_GPIO_TP_INT),
+ .modalias = "ads7846",
+ .max_speed_hz = 1200000,
+ .bus_num = 2,
+ .chip_select = 0,
+ .platform_data = &spitz_ads7846_info,
+ .controller_data = &spitz_ads7846_chip,
+ .irq = gpio_to_irq(SPITZ_GPIO_TP_INT),
}, {
- .modalias = "corgi-lcd",
- .max_speed_hz = 50000,
- .bus_num = 2,
- .chip_select = 1,
- .platform_data = &spitz_lcdcon_info,
- .controller_data= &spitz_lcdcon_chip,
+ .modalias = "corgi-lcd",
+ .max_speed_hz = 50000,
+ .bus_num = 2,
+ .chip_select = 1,
+ .platform_data = &spitz_lcdcon_info,
+ .controller_data = &spitz_lcdcon_chip,
}, {
- .modalias = "max1111",
- .max_speed_hz = 450000,
- .bus_num = 2,
- .chip_select = 2,
- .controller_data= &spitz_max1111_chip,
+ .modalias = "max1111",
+ .max_speed_hz = 450000,
+ .bus_num = 2,
+ .chip_select = 2,
+ .controller_data = &spitz_max1111_chip,
},
};
-static void __init spitz_init_spi(void)
+static struct pxa2xx_spi_master spitz_spi_info = {
+ .num_chipselect = 3,
+};
+
+static void __init spitz_spi_init(void)
{
+ struct corgi_lcd_platform_data *lcd_data = &spitz_lcdcon_info;
+
if (machine_is_akita()) {
- spitz_lcdcon_info.gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
- spitz_lcdcon_info.gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
+ lcd_data->gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
+ lcd_data->gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
}
pxa2xx_set_spi_info(2, &spitz_spi_info);
spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
}
#else
-static inline void spitz_init_spi(void) {}
+static inline void spitz_spi_init(void) {}
#endif
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
/*
- * MMC/SD Device
- *
- * The card detect interrupt isn't debounced so we delay it by 250ms
- * to give the card a chance to fully insert/eject.
+ * NOTE: The card detect interrupt isn't debounced so we delay it by 250ms to
+ * give the card a chance to fully insert/eject.
*/
static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
- if (( 1 << vdd) & p_d->ocr_mask)
- spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0004);
+ if ((1 << vdd) & p_d->ocr_mask)
+ spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, SCOOP_CPR_SD_3V);
else
- spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0000);
+ spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, 0x0);
}
static struct pxamci_platform_data spitz_mci_platform_data = {
.detect_delay_ms = 250,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .setpower = spitz_mci_setpower,
+ .setpower = spitz_mci_setpower,
.gpio_card_detect = SPITZ_GPIO_nSD_DETECT,
.gpio_card_ro = SPITZ_GPIO_nSD_WP,
.gpio_power = -1,
};
+static void __init spitz_mmc_init(void)
+{
+ pxa_set_mci_info(&spitz_mci_platform_data);
+}
+#else
+static inline void spitz_mmc_init(void) {}
+#endif
-/*
- * USB Host (OHCI)
- */
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static int spitz_ohci_init(struct device *dev)
{
int err;
if (err)
return err;
- /* Only Port 2 is connected
- * Setup USB Port 2 Output Control Register
- */
+ /* Only Port 2 is connected, setup USB Port 2 Output Control Register */
UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1);
.power_budget = 150,
};
+static void __init spitz_uhc_init(void)
+{
+ pxa_set_ohci_info(&spitz_ohci_platform_data);
+}
+#else
+static inline void spitz_uhc_init(void) {}
+#endif
-/*
- * Irda
- */
-
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+#if defined(CONFIG_PXA_FICP) || defined(CONFIG_PXA_FICP_MODULE)
static struct pxaficp_platform_data spitz_ficp_platform_data = {
-/* .gpio_pwdown is set in spitz_init() and akita_init() accordingly */
.transceiver_cap = IR_SIRMODE | IR_OFF,
};
+static void __init spitz_irda_init(void)
+{
+ if (machine_is_akita())
+ spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON;
+ else
+ spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
-/*
- * Spitz PXA Framebuffer
- */
+ pxa_set_ficp_info(&spitz_ficp_platform_data);
+}
+#else
+static inline void spitz_irda_init(void) {}
+#endif
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static struct pxafb_mode_info spitz_pxafb_modes[] = {
-{
- .pixclock = 19231,
- .xres = 480,
- .yres = 640,
- .bpp = 16,
- .hsync_len = 40,
- .left_margin = 46,
- .right_margin = 125,
- .vsync_len = 3,
- .upper_margin = 1,
- .lower_margin = 0,
- .sync = 0,
-},{
- .pixclock = 134617,
- .xres = 240,
- .yres = 320,
- .bpp = 16,
- .hsync_len = 20,
- .left_margin = 20,
- .right_margin = 46,
- .vsync_len = 2,
- .upper_margin = 1,
- .lower_margin = 0,
- .sync = 0,
-},
+ {
+ .pixclock = 19231,
+ .xres = 480,
+ .yres = 640,
+ .bpp = 16,
+ .hsync_len = 40,
+ .left_margin = 46,
+ .right_margin = 125,
+ .vsync_len = 3,
+ .upper_margin = 1,
+ .lower_margin = 0,
+ .sync = 0,
+ }, {
+ .pixclock = 134617,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .hsync_len = 20,
+ .left_margin = 20,
+ .right_margin = 46,
+ .vsync_len = 2,
+ .upper_margin = 1,
+ .lower_margin = 0,
+ .sync = 0,
+ },
};
static struct pxafb_mach_info spitz_pxafb_info = {
- .modes = &spitz_pxafb_modes[0],
- .num_modes = 2,
+ .modes = spitz_pxafb_modes,
+ .num_modes = ARRAY_SIZE(spitz_pxafb_modes),
.fixed_modes = 1,
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_ALTERNATE_MAPPING,
};
-static struct mtd_partition sharpsl_nand_partitions[] = {
+static void __init spitz_lcd_init(void)
+{
+ set_pxa_fb_info(&spitz_pxafb_info);
+}
+#else
+static inline void spitz_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_MTD_NAND_SHARPSL) || defined(CONFIG_MTD_NAND_SHARPSL_MODULE)
+static struct mtd_partition spitz_nand_partitions[] = {
{
.name = "System Area",
.offset = 0,
.size = 7 * 1024 * 1024,
- },
- {
+ }, {
.name = "Root Filesystem",
.offset = 7 * 1024 * 1024,
- },
- {
+ }, {
.name = "Home Filesystem",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-static struct nand_bbt_descr sharpsl_bbt = {
- .options = 0,
- .offs = 4,
- .len = 2,
- .pattern = scan_ff_pattern
+static struct nand_bbt_descr spitz_nand_bbt = {
+ .options = 0,
+ .offs = 4,
+ .len = 2,
+ .pattern = scan_ff_pattern
+};
+
+static struct nand_ecclayout akita_oobinfo = {
+ .oobfree = { {0x08, 0x09} },
+ .eccbytes = 24,
+ .eccpos = {
+ 0x05, 0x01, 0x02, 0x03, 0x06, 0x07, 0x15, 0x11,
+ 0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
+ 0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37,
+ },
};
-static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
- .badblock_pattern = &sharpsl_bbt,
- .partitions = sharpsl_nand_partitions,
- .nr_partitions = ARRAY_SIZE(sharpsl_nand_partitions),
+static struct sharpsl_nand_platform_data spitz_nand_pdata = {
+ .badblock_pattern = &spitz_nand_bbt,
+ .partitions = spitz_nand_partitions,
+ .nr_partitions = ARRAY_SIZE(spitz_nand_partitions),
};
-static struct resource sharpsl_nand_resources[] = {
+static struct resource spitz_nand_resources[] = {
{
- .start = 0x0C000000,
- .end = 0x0C000FFF,
+ .start = PXA_CS3_PHYS,
+ .end = PXA_CS3_PHYS + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
};
-static struct platform_device sharpsl_nand_device = {
+static struct platform_device spitz_nand_device = {
.name = "sharpsl-nand",
.id = -1,
- .resource = sharpsl_nand_resources,
- .num_resources = ARRAY_SIZE(sharpsl_nand_resources),
- .dev.platform_data = &sharpsl_nand_platform_data,
+ .resource = spitz_nand_resources,
+ .num_resources = ARRAY_SIZE(spitz_nand_resources),
+ .dev = {
+ .platform_data = &spitz_nand_pdata,
+ }
};
+static void __init spitz_nand_init(void)
+{
+ if (machine_is_spitz()) {
+ spitz_nand_partitions[1].size = 5 * 1024 * 1024;
+ } else if (machine_is_akita()) {
+ spitz_nand_partitions[1].size = 58 * 1024 * 1024;
+ spitz_nand_bbt.len = 1;
+ spitz_nand_pdata.ecc_layout = &akita_oobinfo;
+ } else if (machine_is_borzoi()) {
+ spitz_nand_partitions[1].size = 32 * 1024 * 1024;
+ spitz_nand_bbt.len = 1;
+ spitz_nand_pdata.ecc_layout = &akita_oobinfo;
+ }
+
+ platform_device_register(&spitz_nand_device);
+}
+#else
+static inline void spitz_nand_init(void) {}
+#endif
-static struct mtd_partition sharpsl_rom_parts[] = {
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition spitz_rom_parts[] = {
{
.name ="Boot PROM Filesystem",
.offset = 0x00140000,
},
};
-static struct physmap_flash_data sharpsl_rom_data = {
+static struct physmap_flash_data spitz_rom_data = {
.width = 2,
- .nr_parts = ARRAY_SIZE(sharpsl_rom_parts),
- .parts = sharpsl_rom_parts,
+ .nr_parts = ARRAY_SIZE(spitz_rom_parts),
+ .parts = spitz_rom_parts,
};
-static struct resource sharpsl_rom_resources[] = {
+static struct resource spitz_rom_resources[] = {
{
- .start = 0x00000000,
- .end = 0x007fffff,
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_8M - 1,
.flags = IORESOURCE_MEM,
},
};
-static struct platform_device sharpsl_rom_device = {
- .name = "physmap-flash",
- .id = -1,
- .resource = sharpsl_rom_resources,
- .num_resources = ARRAY_SIZE(sharpsl_rom_resources),
- .dev.platform_data = &sharpsl_rom_data,
+static struct platform_device spitz_rom_device = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = spitz_rom_resources,
+ .num_resources = ARRAY_SIZE(spitz_rom_resources),
+ .dev = {
+ .platform_data = &spitz_rom_data,
+ },
};
-static struct platform_device *devices[] __initdata = {
- &spitzscoop_device,
- &spitzkbd_device,
- &spitz_gpio_keys_device,
- &spitzled_device,
- &sharpsl_nand_device,
- &sharpsl_rom_device,
+static void __init spitz_nor_init(void)
+{
+ platform_device_register(&spitz_rom_device);
+}
+#else
+static inline void spitz_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * GPIO expander
+ ******************************************************************************/
+#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct pca953x_platform_data akita_pca953x_pdata = {
+ .gpio_base = AKITA_IOEXP_GPIO_BASE,
};
+static struct i2c_board_info spitz_i2c_devs[] = {
+ {
+ .type = "wm8750",
+ .addr = 0x1b,
+ }, {
+ .type = "max7310",
+ .addr = 0x18,
+ .platform_data = &akita_pca953x_pdata,
+ },
+};
+
+static struct regulator_consumer_supply isl6271a_consumers[] = {
+ {
+ .supply = "vcc_core",
+ }
+};
+
+static struct regulator_init_data isl6271a_info[] = {
+ {
+ .constraints = {
+ .name = "vcc_core range",
+ .min_uV = 850000,
+ .max_uV = 1600000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .consumer_supplies = isl6271a_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(isl6271a_consumers),
+ }
+};
+
+static struct i2c_board_info spitz_pi2c_devs[] = {
+ {
+ .type = "isl6271a",
+ .addr = 0x0c,
+ .platform_data = &isl6271a_info,
+ },
+};
+
+static void __init spitz_i2c_init(void)
+{
+ int size = ARRAY_SIZE(spitz_i2c_devs);
+
+ /* Only Akita has the max7310 chip */
+ if (!machine_is_akita())
+ size--;
+
+ pxa_set_i2c_info(NULL);
+ pxa27x_set_i2c_power_info(NULL);
+ i2c_register_board_info(0, spitz_i2c_devs, size);
+ i2c_register_board_info(1, ARRAY_AND_SIZE(spitz_pi2c_devs));
+}
+#else
+static inline void spitz_i2c_init(void) {}
+#endif
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
static void spitz_poweroff(void)
{
arm_machine_restart('g', NULL);
static void spitz_restart(char mode, const char *cmd)
{
/* Bootloader magic for a reboot */
- if((MSC0 & 0xffff0000) == 0x7ff00000)
+ if ((MSC0 & 0xffff0000) == 0x7ff00000)
MSC0 = (MSC0 & 0xffff) | 0x7ee00000;
spitz_poweroff();
}
-static void __init common_init(void)
+static void __init spitz_init(void)
{
init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
pm_power_off = spitz_poweroff;
arm_pm_restart = spitz_restart;
- if (machine_is_spitz()) {
- sharpsl_nand_partitions[1].size = 5 * 1024 * 1024;
- } else if (machine_is_akita()) {
- sharpsl_nand_partitions[1].size = 58 * 1024 * 1024;
- } else if (machine_is_borzoi()) {
- sharpsl_nand_partitions[1].size = 32 * 1024 * 1024;
- }
-
PMCR = 0x00;
/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
- spitz_init_spi();
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
- pxa_set_mci_info(&spitz_mci_platform_data);
- pxa_set_ohci_info(&spitz_ohci_platform_data);
- pxa_set_ficp_info(&spitz_ficp_platform_data);
- set_pxa_fb_info(&spitz_pxafb_info);
- pxa_set_i2c_info(NULL);
+ spitz_spi_init();
+ spitz_scoop_init();
+ spitz_mkp_init();
+ spitz_keys_init();
+ spitz_leds_init();
+ spitz_mmc_init();
+ spitz_pcmcia_init();
+ spitz_irda_init();
+ spitz_uhc_init();
+ spitz_lcd_init();
+ spitz_nor_init();
+ spitz_nand_init();
+ spitz_i2c_init();
}
-#if defined(CONFIG_MACH_AKITA) || defined(CONFIG_MACH_BORZOI)
-static struct nand_bbt_descr sharpsl_akita_bbt = {
- .options = 0,
- .offs = 4,
- .len = 1,
- .pattern = scan_ff_pattern
-};
-
-static struct nand_ecclayout akita_oobinfo = {
- .eccbytes = 24,
- .eccpos = {
- 0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11,
- 0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
- 0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37},
- .oobfree = {{0x08, 0x09}}
-};
-#endif
-
-#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
-static void __init spitz_init(void)
-{
- spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
-
-#ifdef CONFIG_MACH_BORZOI
- if (machine_is_borzoi()) {
- sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt;
- sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo;
- }
-#endif
-
- platform_scoop_config = &spitz_pcmcia_config;
-
- common_init();
-
- platform_device_register(&spitzscoop2_device);
-}
-#endif
-
-#ifdef CONFIG_MACH_AKITA
-/*
- * Akita IO Expander
- */
-static struct pca953x_platform_data akita_ioexp = {
- .gpio_base = AKITA_IOEXP_GPIO_BASE,
-};
-
-static struct i2c_board_info akita_i2c_board_info[] = {
- {
- .type = "max7310",
- .addr = 0x18,
- .platform_data = &akita_ioexp,
- }, {
- .type = "wm8750",
- .addr = 0x1b,
- },
-};
-
-static void __init akita_init(void)
-{
- spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON;
-
- sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt;
- sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo;
-
- /* We just pretend the second element of the array doesn't exist */
- spitz_pcmcia_config.num_devs = 1;
- platform_scoop_config = &spitz_pcmcia_config;
-
- i2c_register_board_info(0, ARRAY_AND_SIZE(akita_i2c_board_info));
-
- common_init();
-}
-#endif
-
-static void __init fixup_spitz(struct machine_desc *desc,
+static void __init spitz_fixup(struct machine_desc *desc,
struct tag *tags, char **cmdline, struct meminfo *mi)
{
sharpsl_save_param();
MACHINE_START(SPITZ, "SHARP Spitz")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .fixup = fixup_spitz,
+ .fixup = spitz_fixup,
.map_io = pxa_map_io,
.init_irq = pxa27x_init_irq,
.init_machine = spitz_init,
MACHINE_START(BORZOI, "SHARP Borzoi")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .fixup = fixup_spitz,
+ .fixup = spitz_fixup,
.map_io = pxa_map_io,
.init_irq = pxa27x_init_irq,
.init_machine = spitz_init,
MACHINE_START(AKITA, "SHARP Akita")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .fixup = fixup_spitz,
+ .fixup = spitz_fixup,
.map_io = pxa_map_io,
.init_irq = pxa27x_init_irq,
- .init_machine = akita_init,
+ .init_machine = spitz_init,
.timer = &pxa_timer,
MACHINE_END
#endif
#include <asm/mach-types.h>
#include <mach/hardware.h>
-#include <mach/sharpsl.h>
#include <mach/spitz.h>
#include <mach/pxa27x.h>
+#include <mach/sharpsl_pm.h>
-#include "sharpsl.h"
#include "generic.h"
#define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */
case SHARPSL_STATUS_ACIN:
return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0);
case SHARPSL_STATUS_LOCK:
- return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock);
+ return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock);
case SHARPSL_STATUS_CHRGFULL:
- return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull);
+ return gpio_get_value(sharpsl_pm.machinfo->gpio_batfull);
case SHARPSL_STATUS_FATAL:
- return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal);
+ return gpio_get_value(sharpsl_pm.machinfo->gpio_fatal);
case SHARPSL_ACIN_VOLT:
return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT);
case SHARPSL_BATT_TEMP:
.should_wakeup = spitz_should_wakeup,
#if defined(CONFIG_LCD_CORGI)
.backlight_limit = corgi_lcd_limit_intensity,
-#elif defined(CONFIG_BACKLIGHT_CORGI)
- .backlight_limit = corgibl_limit_intensity,
#endif
.charge_on_volt = SHARPSL_CHARGE_ON_VOLT,
.charge_on_temp = SHARPSL_CHARGE_ON_TEMP,
#include <linux/i2c/at24.h>
#include <linux/smc91x.h>
#include <linux/gpio.h>
+#include <linux/leds.h>
#include <asm/types.h>
#include <asm/setup.h>
#define SG2_GPIO_nSD_DETECT 90
#define SG2_SD_POWER_ENABLE 89
-static unsigned long stargate2_pin_config[] __initdata = {
-
- GPIO15_nCS_1, /* SRAM */
- /* SMC91x */
- GPIO80_nCS_4,
- GPIO40_GPIO, /*cable detect?*/
+static unsigned long sg2_im2_unified_pin_config[] __initdata = {
/* Device Identification for wakeup*/
GPIO102_GPIO,
-
- /* Button */
- GPIO91_GPIO | WAKEUP_ON_LEVEL_HIGH,
-
/* DA9030 */
GPIO1_GPIO,
- /* Compact Flash */
- GPIO79_PSKTSEL,
- GPIO48_nPOE,
- GPIO49_nPWE,
- GPIO50_nPIOR,
- GPIO51_nPIOW,
- GPIO85_nPCE_1,
- GPIO54_nPCE_2,
- GPIO55_nPREG,
- GPIO56_nPWAIT,
- GPIO57_nIOIS16,
- GPIO120_GPIO, /* Buff ctrl */
- GPIO108_GPIO, /* Power ctrl */
- GPIO82_GPIO, /* Reset */
- GPIO53_GPIO, /* SG2_S0_GPIO_DETECT */
-
/* MMC */
GPIO32_MMC_CLK,
GPIO112_MMC_CMD,
GPIO109_MMC_DAT_1,
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
- GPIO90_GPIO, /* nSD detect */
- GPIO89_GPIO, /* SD_POWER_ENABLE */
- /* Bluetooth */
- GPIO81_GPIO, /* reset */
-
- /* cc2420 802.15.4 radio */
- GPIO22_GPIO, /* CC_RSTN (out)*/
- GPIO114_GPIO, /* CC_FIFO (in) */
- GPIO116_GPIO, /* CC_CCA (in) */
- GPIO0_GPIO, /* CC_FIFOP (in) */
- GPIO16_GPIO, /* CCSFD (in) */
- GPIO39_GPIO, /* CSn (out) */
+ /* 802.15.4 radio - driver out of mainline */
+ GPIO22_GPIO, /* CC_RSTN */
+ GPIO114_GPIO, /* CC_FIFO */
+ GPIO116_GPIO, /* CC_CCA */
+ GPIO0_GPIO, /* CC_FIFOP */
+ GPIO16_GPIO, /* CCSFD */
+ GPIO115_GPIO, /* Power enable */
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
/* SSP 3 - 802.15.4 radio */
- GPIO39_GPIO, /* chip select */
+ GPIO39_GPIO, /* Chip Select */
GPIO34_SSP3_SCLK,
GPIO35_SSP3_TXD,
GPIO41_SSP3_RXD,
- /* SSP 2 */
+ /* SSP 2 to daughter boards */
GPIO11_SSP2_RXD,
GPIO38_SSP2_TXD,
GPIO36_SSP2_SCLK,
GPIO37_GPIO, /* chip select */
- /* SSP 1 */
- GPIO26_SSP1_RXD,
- GPIO25_SSP1_TXD,
+ /* SSP 1 - to daughter boards */
+ GPIO24_GPIO, /* Chip Select */
GPIO23_SSP1_SCLK,
- GPIO24_GPIO, /* chip select */
+ GPIO25_SSP1_TXD,
+ GPIO26_SSP1_RXD,
- /* BTUART */
+ /* BTUART Basic Connector*/
GPIO42_BTUART_RXD,
GPIO43_BTUART_TXD,
GPIO44_BTUART_CTS,
GPIO45_BTUART_RTS,
- /* STUART */
+ /* STUART - IM2 via debug board not sure on SG2*/
GPIO46_STUART_RXD,
GPIO47_STUART_TXD,
GPIO96_GPIO, /* accelerometer interrupt */
GPIO99_GPIO, /* ADC interrupt */
- /* Connector pins specified as gpios */
- GPIO94_GPIO, /* large basic connector pin 14 */
- GPIO10_GPIO, /* large basic connector pin 23 */
-
/* SHT15 */
GPIO100_GPIO,
GPIO98_GPIO,
-};
-/**
- * stargate2_reset_bluetooth() reset the bluecore to ensure consistent state
- **/
-static int stargate2_reset_bluetooth(void)
-{
- int err;
- err = gpio_request(SG2_BT_RESET, "SG2_BT_RESET");
- if (err) {
- printk(KERN_ERR "Could not get gpio for bluetooth reset \n");
- return err;
- }
- gpio_direction_output(SG2_BT_RESET, 1);
- mdelay(5);
- /* now reset it - 5 msec minimum */
- gpio_set_value(SG2_BT_RESET, 0);
- mdelay(10);
- gpio_set_value(SG2_BT_RESET, 1);
- gpio_free(SG2_BT_RESET);
- return 0;
-}
+ /* Basic sensor board */
+ GPIO96_GPIO, /* accelerometer interrupt */
+ GPIO99_GPIO, /* ADC interrupt */
-static struct led_info stargate2_leds[] = {
- {
- .name = "sg2:red",
- .flags = DA9030_LED_RATE_ON,
- }, {
- .name = "sg2:blue",
- .flags = DA9030_LED_RATE_ON,
- }, {
- .name = "sg2:green",
- .flags = DA9030_LED_RATE_ON,
- },
+ /* Connector pins specified as gpios */
+ GPIO94_GPIO, /* large basic connector pin 14 */
+ GPIO10_GPIO, /* large basic connector pin 23 */
};
static struct sht15_platform_data platform_data_sht15 = {
},
};
-static struct da903x_subdev_info stargate2_da9030_subdevs[] = {
+static struct mtd_partition stargate2flash_partitions[] = {
{
- .name = "da903x-led",
- .id = DA9030_ID_LED_2,
- .platform_data = &stargate2_leds[0],
+ .name = "Bootloader",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = 0,
}, {
- .name = "da903x-led",
- .id = DA9030_ID_LED_3,
- .platform_data = &stargate2_leds[2],
+ .name = "Kernel",
+ .size = 0x00200000,
+ .offset = 0x00040000,
+ .mask_flags = 0
}, {
- .name = "da903x-led",
- .id = DA9030_ID_LED_4,
- .platform_data = &stargate2_leds[1],
+ .name = "Filesystem",
+ .size = 0x01DC0000,
+ .offset = 0x00240000,
+ .mask_flags = 0
+ },
+};
+
+static struct resource flash_resources = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct flash_platform_data stargate2_flash_data = {
+ .map_name = "cfi_probe",
+ .parts = stargate2flash_partitions,
+ .nr_parts = ARRAY_SIZE(stargate2flash_partitions),
+ .name = "PXA27xOnChipROM",
+ .width = 2,
+};
+
+static struct platform_device stargate2_flash_device = {
+ .name = "pxa2xx-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &stargate2_flash_data,
+ },
+ .resource = &flash_resources,
+ .num_resources = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_0_info = {
+ .num_chipselect = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_1_info = {
+ .num_chipselect = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
+ .num_chipselect = 1,
+};
+
+/* An upcoming kernel change will scrap SFRM usage so these
+ * drivers have been moved to use gpio's via cs_control */
+static struct pxa2xx_spi_chip staccel_chip_info = {
+ .tx_threshold = 8,
+ .rx_threshold = 8,
+ .dma_burst_size = 8,
+ .timeout = 235,
+ .gpio_cs = 24,
+};
+
+static struct pxa2xx_spi_chip cc2420_info = {
+ .tx_threshold = 8,
+ .rx_threshold = 8,
+ .dma_burst_size = 8,
+ .timeout = 235,
+ .gpio_cs = 39,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+ {
+ .modalias = "lis3l02dq",
+ .max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */
+ .bus_num = 1,
+ .chip_select = 0,
+ .controller_data = &staccel_chip_info,
+ .irq = IRQ_GPIO(96),
+ }, {
+ .modalias = "cc2420",
+ .max_speed_hz = 6500000,
+ .bus_num = 3,
+ .chip_select = 0,
+ .controller_data = &cc2420_info,
+ },
+};
+
+static void sg2_udc_command(int cmd)
+{
+ switch (cmd) {
+ case PXA2XX_UDC_CMD_CONNECT:
+ UP2OCR |= UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE;
+ break;
+ case PXA2XX_UDC_CMD_DISCONNECT:
+ UP2OCR &= ~(UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE);
+ break;
+ }
+}
+
+static struct i2c_pxa_platform_data i2c_pwr_pdata = {
+ .fast_mode = 1,
+};
+
+static struct i2c_pxa_platform_data i2c_pdata = {
+ .fast_mode = 1,
+};
+
+static void __init imote2_stargate2_init(void)
+{
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(sg2_im2_unified_pin_config));
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
+ pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
+ pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
+ spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+
+
+ pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
+ pxa_set_i2c_info(&i2c_pdata);
+}
+
+#ifdef CONFIG_MACH_INTELMOTE2
+/* As the the imote2 doesn't currently have a conventional SD slot
+ * there is no option to hotplug cards, making all this rather simple
+ */
+static int imote2_mci_get_ro(struct device *dev)
+{
+ return 0;
+}
+
+/* Rather simple case as hotplugging not possible */
+static struct pxamci_platform_data imote2_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */
+ .get_ro = imote2_mci_get_ro,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
+};
+
+static struct gpio_led imote2_led_pins[] = {
+ {
+ .name = "imote2:red",
+ .gpio = 103,
+ .active_low = 1,
}, {
+ .name = "imote2:green",
+ .gpio = 104,
+ .active_low = 1,
+ }, {
+ .name = "imote2:blue",
+ .gpio = 105,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data imote2_led_data = {
+ .num_leds = ARRAY_SIZE(imote2_led_pins),
+ .leds = imote2_led_pins,
+};
+
+static struct platform_device imote2_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &imote2_led_data,
+ },
+};
+
+static struct da903x_subdev_info imote2_da9030_subdevs[] = {
+ {
.name = "da903x-regulator",
.id = DA9030_ID_LDO2,
.platform_data = &stargate2_ldo_init_data[vcc_bbio],
},
};
-static struct da903x_platform_data stargate2_da9030_pdata = {
- .num_subdevs = ARRAY_SIZE(stargate2_da9030_subdevs),
- .subdevs = stargate2_da9030_subdevs,
+static struct da903x_platform_data imote2_da9030_pdata = {
+ .num_subdevs = ARRAY_SIZE(imote2_da9030_subdevs),
+ .subdevs = imote2_da9030_subdevs,
};
-static struct resource smc91x_resources[] = {
- [0] = {
- .name = "smc91x-regs",
- .start = (PXA_CS4_PHYS + 0x300),
- .end = (PXA_CS4_PHYS + 0xfffff),
- .flags = IORESOURCE_MEM,
+static struct i2c_board_info __initdata imote2_pwr_i2c_board_info[] = {
+ {
+ .type = "da9030",
+ .addr = 0x49,
+ .platform_data = &imote2_da9030_pdata,
+ .irq = gpio_to_irq(1),
},
- [1] = {
- .start = IRQ_GPIO(40),
- .end = IRQ_GPIO(40),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
- }
-};
-
-static struct smc91x_platdata stargate2_smc91x_info = {
- .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT
- | SMC91X_NOWAIT | SMC91X_USE_DMA,
};
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smc91x_resources),
+static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
+ { /* UCAM sensor board */
+ .type = "max1239",
+ .addr = 0x35,
+ }, { /* ITS400 Sensor board only */
+ .type = "max1363",
+ .addr = 0x34,
+ /* Through a nand gate - Also beware, on V2 sensor board the
+ * pull up resistors are missing.
+ */
+ .irq = IRQ_GPIO(99),
+ }, { /* ITS400 Sensor board only */
+ .type = "tsl2561",
+ .addr = 0x49,
+ /* Through a nand gate - Also beware, on V2 sensor board the
+ * pull up resistors are missing.
+ */
+ .irq = IRQ_GPIO(99),
+ }, { /* ITS400 Sensor board only */
+ .type = "tmp175",
+ .addr = 0x4A,
+ .irq = IRQ_GPIO(96),
+ }, { /* IMB400 Multimedia board */
+ .type = "wm8940",
+ .addr = 0x1A,
+ },
+};
+
+static unsigned long imote2_pin_config[] __initdata = {
+
+ /* Button */
+ GPIO91_GPIO,
+
+ /* LEDS */
+ GPIO103_GPIO, /* red led */
+ GPIO104_GPIO, /* green led */
+ GPIO105_GPIO, /* blue led */
+};
+
+static struct pxa2xx_udc_mach_info imote2_udc_info __initdata = {
+ .udc_command = sg2_udc_command,
+};
+
+static struct platform_device *imote2_devices[] = {
+ &stargate2_flash_device,
+ &imote2_leds,
+ &sht15,
+};
+
+static void __init imote2_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(imote2_pin_config));
+
+ imote2_stargate2_init();
+
+ platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices));
+
+ i2c_register_board_info(0, imote2_i2c_board_info,
+ ARRAY_SIZE(imote2_i2c_board_info));
+ i2c_register_board_info(1, imote2_pwr_i2c_board_info,
+ ARRAY_SIZE(imote2_pwr_i2c_board_info));
+
+ pxa_set_mci_info(&imote2_mci_platform_data);
+ pxa_set_udc_info(&imote2_udc_info);
+}
+#endif
+
+#ifdef CONFIG_MACH_STARGATE2
+
+static unsigned long stargate2_pin_config[] __initdata = {
+
+ GPIO15_nCS_1, /* SRAM */
+ /* SMC91x */
+ GPIO80_nCS_4,
+ GPIO40_GPIO, /*cable detect?*/
+
+ /* Button */
+ GPIO91_GPIO | WAKEUP_ON_LEVEL_HIGH,
+
+ /* Compact Flash */
+ GPIO79_PSKTSEL,
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO85_nPCE_1,
+ GPIO54_nPCE_2,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+ GPIO120_GPIO, /* Buff ctrl */
+ GPIO108_GPIO, /* Power ctrl */
+ GPIO82_GPIO, /* Reset */
+ GPIO53_GPIO, /* SG2_S0_GPIO_DETECT */
+
+ /* MMC not shared with imote2 */
+ GPIO90_GPIO, /* nSD detect */
+ GPIO89_GPIO, /* SD_POWER_ENABLE */
+
+ /* Bluetooth */
+ GPIO81_GPIO, /* reset */
+};
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .name = "smc91x-regs",
+ .start = (PXA_CS4_PHYS + 0x300),
+ .end = (PXA_CS4_PHYS + 0xfffff),
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_GPIO(40),
+ .end = IRQ_GPIO(40),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+
+static struct smc91x_platdata stargate2_smc91x_info = {
+ .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT
+ | SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
.dev = {
.platform_data = &stargate2_smc91x_info,
};
-
/*
* The card detect interrupt isn't debounced so we delay it by 250ms
* to give the card a chance to fully insert / eject.
.exit = stargate2_mci_exit,
};
-static struct mtd_partition stargate2flash_partitions[] = {
- {
- .name = "Bootloader",
- .size = 0x00040000,
- .offset = 0,
- .mask_flags = 0,
- }, {
- .name = "Kernel",
- .size = 0x00200000,
- .offset = 0x00040000,
- .mask_flags = 0
- }, {
- .name = "Filesystem",
- .size = 0x01DC0000,
- .offset = 0x00240000,
- .mask_flags = 0
- },
-};
-
-static struct resource flash_resources = {
- .start = PXA_CS0_PHYS,
- .end = PXA_CS0_PHYS + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct flash_platform_data stargate2_flash_data = {
- .map_name = "cfi_probe",
- .parts = stargate2flash_partitions,
- .nr_parts = ARRAY_SIZE(stargate2flash_partitions),
- .name = "PXA27xOnChipROM",
- .width = 2,
-};
-
-static struct platform_device stargate2_flash_device = {
- .name = "pxa2xx-flash",
- .id = 0,
- .dev = {
- .platform_data = &stargate2_flash_data,
- },
- .resource = &flash_resources,
- .num_resources = 1,
-};
/*
* SRAM - The Stargate 2 has 32MB of SRAM.
.page_size = 4,
};
+/**
+ * stargate2_reset_bluetooth() reset the bluecore to ensure consistent state
+ **/
+static int stargate2_reset_bluetooth(void)
+{
+ int err;
+ err = gpio_request(SG2_BT_RESET, "SG2_BT_RESET");
+ if (err) {
+ printk(KERN_ERR "Could not get gpio for bluetooth reset\n");
+ return err;
+ }
+ gpio_direction_output(SG2_BT_RESET, 1);
+ mdelay(5);
+ /* now reset it - 5 msec minimum */
+ gpio_set_value(SG2_BT_RESET, 0);
+ mdelay(10);
+ gpio_set_value(SG2_BT_RESET, 1);
+ gpio_free(SG2_BT_RESET);
+ return 0;
+}
+
+static struct led_info stargate2_leds[] = {
+ {
+ .name = "sg2:red",
+ .flags = DA9030_LED_RATE_ON,
+ }, {
+ .name = "sg2:blue",
+ .flags = DA9030_LED_RATE_ON,
+ }, {
+ .name = "sg2:green",
+ .flags = DA9030_LED_RATE_ON,
+ },
+};
+
+static struct da903x_subdev_info stargate2_da9030_subdevs[] = {
+ {
+ .name = "da903x-led",
+ .id = DA9030_ID_LED_2,
+ .platform_data = &stargate2_leds[0],
+ }, {
+ .name = "da903x-led",
+ .id = DA9030_ID_LED_3,
+ .platform_data = &stargate2_leds[2],
+ }, {
+ .name = "da903x-led",
+ .id = DA9030_ID_LED_4,
+ .platform_data = &stargate2_leds[1],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO2,
+ .platform_data = &stargate2_ldo_init_data[vcc_bbio],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO3,
+ .platform_data = &stargate2_ldo_init_data[vcc_bb],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO4,
+ .platform_data = &stargate2_ldo_init_data[vcc_pxa_flash],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO5,
+ .platform_data = &stargate2_ldo_init_data[vcc_cc2420],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO6,
+ .platform_data = &stargate2_ldo_init_data[vcc_vref],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO7,
+ .platform_data = &stargate2_ldo_init_data[vcc_sram_ext],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO8,
+ .platform_data = &stargate2_ldo_init_data[vcc_mica],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO9,
+ .platform_data = &stargate2_ldo_init_data[vcc_bt],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO10,
+ .platform_data = &stargate2_ldo_init_data[vcc_sensor_1_8],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO11,
+ .platform_data = &stargate2_ldo_init_data[vcc_sensor_3],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO12,
+ .platform_data = &stargate2_ldo_init_data[vcc_lcd],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO15,
+ .platform_data = &stargate2_ldo_init_data[vcc_pxa_pll],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO17,
+ .platform_data = &stargate2_ldo_init_data[vcc_pxa_usim],
+ }, {
+ .name = "da903x-regulator", /*pxa vcc i/o and cc2420 vcc i/o */
+ .id = DA9030_ID_LDO18,
+ .platform_data = &stargate2_ldo_init_data[vcc_io],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO19,
+ .platform_data = &stargate2_ldo_init_data[vcc_pxa_mem],
+ },
+};
+
+static struct da903x_platform_data stargate2_da9030_pdata = {
+ .num_subdevs = ARRAY_SIZE(stargate2_da9030_subdevs),
+ .subdevs = stargate2_da9030_subdevs,
+};
+
+static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = {
+ {
+ .type = "da9030",
+ .addr = 0x49,
+ .platform_data = &stargate2_da9030_pdata,
+ .irq = gpio_to_irq(1),
+ },
+};
static struct i2c_board_info __initdata stargate2_i2c_board_info[] = {
/* Techically this a pca9500 - but it's compatible with the 8574
},
};
-static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = {
- {
- .type = "da9030",
- .addr = 0x49,
- .platform_data = &stargate2_da9030_pdata,
- .irq = gpio_to_irq(1),
- },
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_0_info = {
- .num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_1_info = {
- .num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
- .num_chipselect = 1,
-};
-
-/* An upcoming kernel change will scrap SFRM usage so these
- * drivers have been moved to use gpio's via cs_control */
-static struct pxa2xx_spi_chip staccel_chip_info = {
- .tx_threshold = 8,
- .rx_threshold = 8,
- .dma_burst_size = 8,
- .timeout = 235,
- .gpio_cs = 24,
-};
-
-static struct pxa2xx_spi_chip cc2420_info = {
- .tx_threshold = 8,
- .rx_threshold = 8,
- .dma_burst_size = 8,
- .timeout = 235,
- .gpio_cs = 39,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
- {
- .modalias = "lis3l02dq",
- .max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */
- .bus_num = 1,
- .chip_select = 0,
- .controller_data = &staccel_chip_info,
- .irq = IRQ_GPIO(96),
- }, {
- .modalias = "cc2420",
- .max_speed_hz = 6500000,
- .bus_num = 3,
- .chip_select = 0,
- .controller_data = &cc2420_info,
- },
-};
-
-static void sg2_udc_command(int cmd)
-{
- switch (cmd) {
- case PXA2XX_UDC_CMD_CONNECT:
- UP2OCR |= UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE;
- break;
- case PXA2XX_UDC_CMD_DISCONNECT:
- UP2OCR &= ~(UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE);
- break;
- }
-}
-
/* Board doesn't support cable detection - so always lie and say
* something is there.
*/
&sht15,
};
-static struct i2c_pxa_platform_data i2c_pwr_pdata = {
- .fast_mode = 1,
-};
-
-static struct i2c_pxa_platform_data i2c_pdata = {
- .fast_mode = 1,
-};
-
static void __init stargate2_init(void)
{
/* This is probably a board specific hack as this must be set
pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));
- pxa_set_ffuart_info(NULL);
- pxa_set_btuart_info(NULL);
- pxa_set_stuart_info(NULL);
+ imote2_stargate2_init();
platform_add_devices(ARRAY_AND_SIZE(stargate2_devices));
- pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
- pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
- pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
- spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
i2c_register_board_info(0, ARRAY_AND_SIZE(stargate2_i2c_board_info));
- i2c_register_board_info(1,
- ARRAY_AND_SIZE(stargate2_pwr_i2c_board_info));
- pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
- pxa_set_i2c_info(&i2c_pdata);
+ i2c_register_board_info(1, stargate2_pwr_i2c_board_info,
+ ARRAY_SIZE(stargate2_pwr_i2c_board_info));
pxa_set_mci_info(&stargate2_mci_platform_data);
stargate2_reset_bluetooth();
}
+#endif
+
+#ifdef CONFIG_MACH_INTELMOTE2
+MACHINE_START(INTELMOTE2, "IMOTE 2")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = imote2_init,
+ .boot_params = 0xA0000100,
+MACHINE_END
+#endif
+#ifdef CONFIG_MACH_STARGATE2
MACHINE_START(STARGATE2, "Stargate 2")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.init_machine = stargate2_init,
.boot_params = 0xA0000100,
MACHINE_END
+#endif
i2c_register_board_info(0, trizeps4_i2c_devices,
ARRAY_SIZE(trizeps4_i2c_devices));
-#ifdef CONFIG_IDE_PXA_CF
- /* if boot direct from compact flash dont disable power */
- trizeps_conxs_bcr = 0x0009;
-#else
/* this is the reset value */
trizeps_conxs_bcr = 0x00A0;
-#endif
+
BCR_writew(trizeps_conxs_bcr);
board_backlight_power(1);
}
#include <linux/dm9000.h>
#include <linux/ucb1400.h>
#include <linux/ata_platform.h>
+#include <linux/regulator/max1586.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/ohci.h>
#include <mach/pxa27x-udc.h>
#include <mach/udc.h>
+#include <mach/pata_pxa.h>
#include <plat/i2c.h>
static void __init vpac270_rtc_init(void)
{
- pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(vpac270_i2c_devs));
}
#else
.vsync_len = 2,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-},
+}, { /* CRT 640x480 */
+ .pixclock = 35000,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 16,
+ .depth = 16,
+
+ .left_margin = 96,
+ .right_margin = 48,
+ .upper_margin = 33,
+ .lower_margin = 10,
+
+ .hsync_len = 48,
+ .vsync_len = 1,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+}, { /* CRT 800x600 H=30kHz V=48HZ */
+ .pixclock = 25000,
+ .xres = 800,
+ .yres = 600,
+ .bpp = 16,
+ .depth = 16,
+
+ .left_margin = 50,
+ .right_margin = 1,
+ .upper_margin = 21,
+ .lower_margin = 12,
+
+ .hsync_len = 8,
+ .vsync_len = 1,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+}, { /* CRT 1024x768 H=40kHz V=50Hz */
+ .pixclock = 15000,
+ .xres = 1024,
+ .yres = 768,
+ .bpp = 16,
+ .depth = 16,
+
+ .left_margin = 220,
+ .right_margin = 8,
+ .upper_margin = 33,
+ .lower_margin = 2,
+
+ .hsync_len = 48,
+ .vsync_len = 1,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+}
};
static struct pxafb_mach_info vpac270_lcd_screen = {
/******************************************************************************
* PATA IDE
******************************************************************************/
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-static struct pata_platform_info vpac270_pata_pdata = {
- .ioport_shift = 1,
+#if defined(CONFIG_PATA_PXA) || defined(CONFIG_PATA_PXA_MODULE)
+static struct pata_pxa_pdata vpac270_pata_pdata = {
+ .reg_shift = 1,
+ .dma_dreq = 1,
.irq_flags = IRQF_TRIGGER_RISING,
};
.end = PXA_CS3_PHYS + 0x15f,
.flags = IORESOURCE_MEM
},
- [2] = { /* IDE IRQ pin */
+ [2] = { /* DMA Base address */
+ .start = PXA_CS3_PHYS + 0x20,
+ .end = PXA_CS3_PHYS + 0x2f,
+ .flags = IORESOURCE_DMA
+ },
+ [3] = { /* IDE IRQ pin */
.start = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
.end = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
.flags = IORESOURCE_IRQ
};
static struct platform_device vpac270_ide_device = {
- .name = "pata_platform",
+ .name = "pata_pxa",
.num_resources = ARRAY_SIZE(vpac270_ide_resources),
.resource = vpac270_ide_resources,
.dev = {
.platform_data = &vpac270_pata_pdata,
+ .coherent_dma_mask = 0xffffffff,
}
};
#endif
/******************************************************************************
+ * Core power regulator
+ ******************************************************************************/
+#if defined(CONFIG_REGULATOR_MAX1586) || \
+ defined(CONFIG_REGULATOR_MAX1586_MODULE)
+static struct regulator_consumer_supply vpac270_max1587a_consumers[] = {
+ {
+ .supply = "vcc_core",
+ }
+};
+
+static struct regulator_init_data vpac270_max1587a_v3_info = {
+ .constraints = {
+ .name = "vcc_core range",
+ .min_uV = 900000,
+ .max_uV = 1705000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .consumer_supplies = vpac270_max1587a_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(vpac270_max1587a_consumers),
+};
+
+static struct max1586_subdev_data vpac270_max1587a_subdevs[] = {
+ {
+ .name = "vcc_core",
+ .id = MAX1586_V3,
+ .platform_data = &vpac270_max1587a_v3_info,
+ }
+};
+
+static struct max1586_platform_data vpac270_max1587a_info = {
+ .subdevs = vpac270_max1587a_subdevs,
+ .num_subdevs = ARRAY_SIZE(vpac270_max1587a_subdevs),
+ .v3_gain = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
+};
+
+static struct i2c_board_info __initdata vpac270_pi2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("max1586", 0x14),
+ .platform_data = &vpac270_max1587a_info,
+ },
+};
+
+static void __init vpac270_pmic_init(void)
+{
+ i2c_register_board_info(1, ARRAY_AND_SIZE(vpac270_pi2c_board_info));
+}
+#else
+static inline void vpac270_pmic_init(void) {}
+#endif
+
+
+/******************************************************************************
* Machine init
******************************************************************************/
static void __init vpac270_init(void)
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
+ pxa_set_i2c_info(NULL);
+ pxa27x_set_i2c_power_info(NULL);
+ vpac270_pmic_init();
vpac270_lcd_init();
vpac270_mmc_init();
vpac270_nor_init();
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/pwm_backlight.h>
+#include <linux/z2_battery.h>
#include <linux/dma-mapping.h>
#include <linux/spi/spi.h>
#include <linux/spi/libertas_spi.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/delay.h>
+#include <linux/regulator/machine.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
}, {
.name = "U-Boot Environment",
.offset = 0x40000,
- .size = 0x60000,
+ .size = 0x20000,
}, {
.name = "Flash",
.offset = 0x60000,
#endif
/******************************************************************************
+ * Battery
+ ******************************************************************************/
+#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct z2_battery_info batt_chip_info = {
+ .batt_I2C_bus = 0,
+ .batt_I2C_addr = 0x55,
+ .batt_I2C_reg = 2,
+ .charge_gpio = GPIO0_ZIPITZ2_AC_DETECT,
+ .min_voltage = 2400000,
+ .max_voltage = 3700000,
+ .batt_div = 69,
+ .batt_mult = 1000000,
+ .batt_tech = POWER_SUPPLY_TECHNOLOGY_LION,
+ .batt_name = "Z2",
+};
+
+static struct i2c_board_info __initdata z2_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("aer915", 0x55),
+ .platform_data = &batt_chip_info,
+ }, {
+ I2C_BOARD_INFO("wm8750", 0x1b),
+ },
+
+};
+
+static void __init z2_i2c_init(void)
+{
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(z2_i2c_board_info));
+}
+#else
+static inline void z2_i2c_init(void) {}
+#endif
+
+/******************************************************************************
* SSP Devices - WiFi and LCD control
******************************************************************************/
#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
#endif
/******************************************************************************
+ * Core power regulator
+ ******************************************************************************/
+#if defined(CONFIG_REGULATOR_TPS65023) || \
+ defined(CONFIG_REGULATOR_TPS65023_MODULE)
+static struct regulator_consumer_supply z2_tps65021_consumers[] = {
+ {
+ .supply = "vcc_core",
+ }
+};
+
+static struct regulator_init_data z2_tps65021_info[] = {
+ {
+ .constraints = {
+ .name = "vcc_core range",
+ .min_uV = 800000,
+ .max_uV = 1600000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .consumer_supplies = z2_tps65021_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(z2_tps65021_consumers),
+ }, {
+ .constraints = {
+ .name = "DCDC2",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .always_on = 1,
+ },
+ }, {
+ .constraints = {
+ .name = "DCDC3",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .always_on = 1,
+ },
+ }, {
+ .constraints = {
+ .name = "LDO1",
+ .min_uV = 1000000,
+ .max_uV = 3150000,
+ .always_on = 1,
+ },
+ }, {
+ .constraints = {
+ .name = "LDO2",
+ .min_uV = 1050000,
+ .max_uV = 3300000,
+ .always_on = 1,
+ },
+ }
+};
+
+static struct i2c_board_info __initdata z2_pi2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("tps65021", 0x48),
+ .platform_data = &z2_tps65021_info,
+ },
+};
+
+static void __init z2_pmic_init(void)
+{
+ pxa27x_set_i2c_power_info(NULL);
+ i2c_register_board_info(1, ARRAY_AND_SIZE(z2_pi2c_board_info));
+}
+#else
+static inline void z2_pmic_init(void) {}
+#endif
+
+/******************************************************************************
* Machine init
******************************************************************************/
static void __init z2_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(z2_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
z2_lcd_init();
z2_mmc_init();
z2_mkp_init();
-
- pxa_set_i2c_info(NULL);
-
+ z2_i2c_init();
z2_spi_init();
z2_nor_init();
z2_pwm_init();
z2_leds_init();
z2_keys_init();
+ z2_pmic_init();
}
MACHINE_START(ZIPIT2, "Zipit Z2")
*/
#ifdef CONFIG_SA1111
#define NR_IRQS (IRQ_BOARD_END + 55)
-#elif defined(CONFIG_SHARPSL_LOCOMO)
+#elif defined(CONFIG_SHARP_LOCOMO)
#define NR_IRQS (IRQ_BOARD_START + 4)
#else
#define NR_IRQS (IRQ_BOARD_START)
obj-y := dma.o
-obj-$(CONFIG_ARCH_PXA) += pmu.o
obj-$(CONFIG_GENERIC_GPIO) += gpio.o
obj-$(CONFIG_PXA3xx) += mfp.o
obj-$(CONFIG_ARCH_MMP) += mfp.o
+++ /dev/null
-/*
- * PMU IRQ registration for the PXA xscale PMU families.
- * Copyright (C) 2010 Will Deacon, ARM Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/platform_device.h>
-#include <asm/pmu.h>
-#include <mach/irqs.h>
-
-static struct resource pmu_resource = {
- .start = IRQ_PMU,
- .end = IRQ_PMU,
- .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device pmu_device = {
- .name = "arm-pmu",
- .id = ARM_PMU_DEVICE_CPU,
- .resource = &pmu_resource,
- .num_resources = 1,
-};
-
-static int __init pxa_pmu_init(void)
-{
- platform_device_register(&pmu_device);
- return 0;
-}
-arch_initcall(pxa_pmu_init);
If unsure, say N.
+config PATA_PXA
+ tristate "PXA DMA-capable PATA support"
+ depends on ARCH_PXA
+ help
+ This option enables support for harddrive attached to PXA CPU's bus.
+
+ NOTE: This driver utilizes PXA DMA controller, in case your hardware
+ is not capable of doing MWDMA, use pata_platform instead.
+
+ If unsure, say N.
+
config PATA_WINBOND
tristate "Winbond SL82C105 PATA support"
depends on PCI
obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o
obj-$(CONFIG_PATA_WINBOND_VLB) += pata_winbond.o
+obj-$(CONFIG_PATA_PXA) += pata_pxa.o
+
# Should be last but two libata driver
obj-$(CONFIG_PATA_ACPI) += pata_acpi.o
# Should be last but one libata driver
--- /dev/null
+/*
+ * Generic PXA PATA driver
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/ata.h>
+#include <linux/libata.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/completion.h>
+
+#include <scsi/scsi_host.h>
+
+#include <mach/pxa2xx-regs.h>
+#include <mach/pata_pxa.h>
+#include <mach/dma.h>
+
+#define DRV_NAME "pata_pxa"
+#define DRV_VERSION "0.1"
+
+struct pata_pxa_data {
+ uint32_t dma_channel;
+ struct pxa_dma_desc *dma_desc;
+ dma_addr_t dma_desc_addr;
+ uint32_t dma_desc_id;
+
+ /* DMA IO physical address */
+ uint32_t dma_io_addr;
+ /* PXA DREQ<0:2> pin selector */
+ uint32_t dma_dreq;
+ /* DMA DCSR register value */
+ uint32_t dma_dcsr;
+
+ struct completion dma_done;
+};
+
+/*
+ * Setup the DMA descriptors. The size is transfer capped at 4k per descriptor,
+ * if the transfer is longer, it is split into multiple chained descriptors.
+ */
+static void pxa_load_dmac(struct scatterlist *sg, struct ata_queued_cmd *qc)
+{
+ struct pata_pxa_data *pd = qc->ap->private_data;
+
+ uint32_t cpu_len, seg_len;
+ dma_addr_t cpu_addr;
+
+ cpu_addr = sg_dma_address(sg);
+ cpu_len = sg_dma_len(sg);
+
+ do {
+ seg_len = (cpu_len > 0x1000) ? 0x1000 : cpu_len;
+
+ pd->dma_desc[pd->dma_desc_id].ddadr = pd->dma_desc_addr +
+ ((pd->dma_desc_id + 1) * sizeof(struct pxa_dma_desc));
+
+ pd->dma_desc[pd->dma_desc_id].dcmd = DCMD_BURST32 |
+ DCMD_WIDTH2 | (DCMD_LENGTH & seg_len);
+
+ if (qc->tf.flags & ATA_TFLAG_WRITE) {
+ pd->dma_desc[pd->dma_desc_id].dsadr = cpu_addr;
+ pd->dma_desc[pd->dma_desc_id].dtadr = pd->dma_io_addr;
+ pd->dma_desc[pd->dma_desc_id].dcmd |= DCMD_INCSRCADDR |
+ DCMD_FLOWTRG;
+ } else {
+ pd->dma_desc[pd->dma_desc_id].dsadr = pd->dma_io_addr;
+ pd->dma_desc[pd->dma_desc_id].dtadr = cpu_addr;
+ pd->dma_desc[pd->dma_desc_id].dcmd |= DCMD_INCTRGADDR |
+ DCMD_FLOWSRC;
+ }
+
+ cpu_len -= seg_len;
+ cpu_addr += seg_len;
+ pd->dma_desc_id++;
+
+ } while (cpu_len);
+
+ /* Should not happen */
+ if (seg_len & 0x1f)
+ DALGN |= (1 << pd->dma_dreq);
+}
+
+/*
+ * Prepare taskfile for submission.
+ */
+static void pxa_qc_prep(struct ata_queued_cmd *qc)
+{
+ struct pata_pxa_data *pd = qc->ap->private_data;
+ int si = 0;
+ struct scatterlist *sg;
+
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP))
+ return;
+
+ pd->dma_desc_id = 0;
+
+ DCSR(pd->dma_channel) = 0;
+ DALGN &= ~(1 << pd->dma_dreq);
+
+ for_each_sg(qc->sg, sg, qc->n_elem, si)
+ pxa_load_dmac(sg, qc);
+
+ pd->dma_desc[pd->dma_desc_id - 1].ddadr = DDADR_STOP;
+
+ /* Fire IRQ only at the end of last block */
+ pd->dma_desc[pd->dma_desc_id - 1].dcmd |= DCMD_ENDIRQEN;
+
+ DDADR(pd->dma_channel) = pd->dma_desc_addr;
+ DRCMR(pd->dma_dreq) = DRCMR_MAPVLD | pd->dma_channel;
+
+}
+
+/*
+ * Configure the DMA controller, load the DMA descriptors, but don't start the
+ * DMA controller yet. Only issue the ATA command.
+ */
+static void pxa_bmdma_setup(struct ata_queued_cmd *qc)
+{
+ qc->ap->ops->sff_exec_command(qc->ap, &qc->tf);
+}
+
+/*
+ * Execute the DMA transfer.
+ */
+static void pxa_bmdma_start(struct ata_queued_cmd *qc)
+{
+ struct pata_pxa_data *pd = qc->ap->private_data;
+ init_completion(&pd->dma_done);
+ DCSR(pd->dma_channel) = DCSR_RUN;
+}
+
+/*
+ * Wait until the DMA transfer completes, then stop the DMA controller.
+ */
+static void pxa_bmdma_stop(struct ata_queued_cmd *qc)
+{
+ struct pata_pxa_data *pd = qc->ap->private_data;
+
+ if ((DCSR(pd->dma_channel) & DCSR_RUN) &&
+ wait_for_completion_timeout(&pd->dma_done, HZ))
+ dev_err(qc->ap->dev, "Timeout waiting for DMA completion!");
+
+ DCSR(pd->dma_channel) = 0;
+}
+
+/*
+ * Read DMA status. The bmdma_stop() will take care of properly finishing the
+ * DMA transfer so we always have DMA-complete interrupt here.
+ */
+static unsigned char pxa_bmdma_status(struct ata_port *ap)
+{
+ struct pata_pxa_data *pd = ap->private_data;
+ unsigned char ret = ATA_DMA_INTR;
+
+ if (pd->dma_dcsr & DCSR_BUSERR)
+ ret |= ATA_DMA_ERR;
+
+ return ret;
+}
+
+/*
+ * No IRQ register present so we do nothing.
+ */
+static void pxa_irq_clear(struct ata_port *ap)
+{
+}
+
+/*
+ * Check for ATAPI DMA. ATAPI DMA is unsupported by this driver. It's still
+ * unclear why ATAPI has DMA issues.
+ */
+static int pxa_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+ return -EOPNOTSUPP;
+}
+
+static struct scsi_host_template pxa_ata_sht = {
+ ATA_BMDMA_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations pxa_ata_port_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .cable_detect = ata_cable_40wire,
+
+ .bmdma_setup = pxa_bmdma_setup,
+ .bmdma_start = pxa_bmdma_start,
+ .bmdma_stop = pxa_bmdma_stop,
+ .bmdma_status = pxa_bmdma_status,
+
+ .check_atapi_dma = pxa_check_atapi_dma,
+
+ .sff_irq_clear = pxa_irq_clear,
+
+ .qc_prep = pxa_qc_prep,
+};
+
+/*
+ * DMA interrupt handler.
+ */
+static void pxa_ata_dma_irq(int dma, void *port)
+{
+ struct ata_port *ap = port;
+ struct pata_pxa_data *pd = ap->private_data;
+
+ pd->dma_dcsr = DCSR(dma);
+ DCSR(dma) = pd->dma_dcsr;
+
+ if (pd->dma_dcsr & DCSR_STOPSTATE)
+ complete(&pd->dma_done);
+}
+
+static int __devinit pxa_ata_probe(struct platform_device *pdev)
+{
+ struct ata_host *host;
+ struct ata_port *ap;
+ struct pata_pxa_data *data;
+ struct resource *cmd_res;
+ struct resource *ctl_res;
+ struct resource *dma_res;
+ struct resource *irq_res;
+ struct pata_pxa_pdata *pdata = pdev->dev.platform_data;
+ int ret = 0;
+
+ /*
+ * Resource validation, three resources are needed:
+ * - CMD port base address
+ * - CTL port base address
+ * - DMA port base address
+ * - IRQ pin
+ */
+ if (pdev->num_resources != 4) {
+ dev_err(&pdev->dev, "invalid number of resources\n");
+ return -EINVAL;
+ }
+
+ /*
+ * CMD port base address
+ */
+ cmd_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (unlikely(cmd_res == NULL))
+ return -EINVAL;
+
+ /*
+ * CTL port base address
+ */
+ ctl_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (unlikely(ctl_res == NULL))
+ return -EINVAL;
+
+ /*
+ * DMA port base address
+ */
+ dma_res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+ if (unlikely(dma_res == NULL))
+ return -EINVAL;
+
+ /*
+ * IRQ pin
+ */
+ irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (unlikely(irq_res == NULL))
+ return -EINVAL;
+
+ /*
+ * Allocate the host
+ */
+ host = ata_host_alloc(&pdev->dev, 1);
+ if (!host)
+ return -ENOMEM;
+
+ ap = host->ports[0];
+ ap->ops = &pxa_ata_port_ops;
+ ap->pio_mask = ATA_PIO4;
+ ap->mwdma_mask = ATA_MWDMA2;
+ ap->flags = ATA_FLAG_MMIO;
+
+ ap->ioaddr.cmd_addr = devm_ioremap(&pdev->dev, cmd_res->start,
+ resource_size(cmd_res));
+ ap->ioaddr.ctl_addr = devm_ioremap(&pdev->dev, ctl_res->start,
+ resource_size(ctl_res));
+ ap->ioaddr.bmdma_addr = devm_ioremap(&pdev->dev, dma_res->start,
+ resource_size(dma_res));
+
+ /*
+ * Adjust register offsets
+ */
+ ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
+ ap->ioaddr.data_addr = ap->ioaddr.cmd_addr +
+ (ATA_REG_DATA << pdata->reg_shift);
+ ap->ioaddr.error_addr = ap->ioaddr.cmd_addr +
+ (ATA_REG_ERR << pdata->reg_shift);
+ ap->ioaddr.feature_addr = ap->ioaddr.cmd_addr +
+ (ATA_REG_FEATURE << pdata->reg_shift);
+ ap->ioaddr.nsect_addr = ap->ioaddr.cmd_addr +
+ (ATA_REG_NSECT << pdata->reg_shift);
+ ap->ioaddr.lbal_addr = ap->ioaddr.cmd_addr +
+ (ATA_REG_LBAL << pdata->reg_shift);
+ ap->ioaddr.lbam_addr = ap->ioaddr.cmd_addr +
+ (ATA_REG_LBAM << pdata->reg_shift);
+ ap->ioaddr.lbah_addr = ap->ioaddr.cmd_addr +
+ (ATA_REG_LBAH << pdata->reg_shift);
+ ap->ioaddr.device_addr = ap->ioaddr.cmd_addr +
+ (ATA_REG_DEVICE << pdata->reg_shift);
+ ap->ioaddr.status_addr = ap->ioaddr.cmd_addr +
+ (ATA_REG_STATUS << pdata->reg_shift);
+ ap->ioaddr.command_addr = ap->ioaddr.cmd_addr +
+ (ATA_REG_CMD << pdata->reg_shift);
+
+ /*
+ * Allocate and load driver's internal data structure
+ */
+ data = devm_kzalloc(&pdev->dev, sizeof(struct pata_pxa_data),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ ap->private_data = data;
+ data->dma_dreq = pdata->dma_dreq;
+ data->dma_io_addr = dma_res->start;
+
+ /*
+ * Allocate space for the DMA descriptors
+ */
+ data->dma_desc = dmam_alloc_coherent(&pdev->dev, PAGE_SIZE,
+ &data->dma_desc_addr, GFP_KERNEL);
+ if (!data->dma_desc)
+ return -EINVAL;
+
+ /*
+ * Request the DMA channel
+ */
+ data->dma_channel = pxa_request_dma(DRV_NAME, DMA_PRIO_LOW,
+ pxa_ata_dma_irq, ap);
+ if (data->dma_channel < 0)
+ return -EBUSY;
+
+ /*
+ * Stop and clear the DMA channel
+ */
+ DCSR(data->dma_channel) = 0;
+
+ /*
+ * Activate the ATA host
+ */
+ ret = ata_host_activate(host, irq_res->start, ata_sff_interrupt,
+ pdata->irq_flags, &pxa_ata_sht);
+ if (ret)
+ pxa_free_dma(data->dma_channel);
+
+ return ret;
+}
+
+static int __devexit pxa_ata_remove(struct platform_device *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ struct pata_pxa_data *data = host->ports[0]->private_data;
+
+ pxa_free_dma(data->dma_channel);
+
+ ata_host_detach(host);
+
+ return 0;
+}
+
+static struct platform_driver pxa_ata_driver = {
+ .probe = pxa_ata_probe,
+ .remove = __devexit_p(pxa_ata_remove),
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init pxa_ata_init(void)
+{
+ return platform_driver_register(&pxa_ata_driver);
+}
+
+static void __exit pxa_ata_exit(void)
+{
+ platform_driver_unregister(&pxa_ata_driver);
+}
+
+module_init(pxa_ata_init);
+module_exit(pxa_ata_exit);
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("DMA-capable driver for PATA on PXA CPU");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("platform:" DRV_NAME);
depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
|| MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
|| ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \
- || MACH_VPAC270)
+ || MACH_VPAC270 || MACH_BALLOON3)
select PCMCIA_SOC_COMMON
help
Say Y here to include support for the PXA2xx PCMCIA controller
pxa2xx-obj-$(CONFIG_MACH_E740) += pxa2xx_e740.o
pxa2xx-obj-$(CONFIG_MACH_STARGATE2) += pxa2xx_stargate2.o
pxa2xx-obj-$(CONFIG_MACH_VPAC270) += pxa2xx_vpac270.o
+pxa2xx-obj-$(CONFIG_MACH_BALLOON3) += pxa2xx_balloon3.o
obj-$(CONFIG_PCMCIA_PXA2XX) += pxa2xx_base.o $(pxa2xx-obj-y)
--- /dev/null
+/*
+ * linux/drivers/pcmcia/pxa2xx_balloon3.c
+ *
+ * Balloon3 PCMCIA specific routines.
+ *
+ * Author: Nick Bane
+ * Created: June, 2006
+ * Copyright: Toby Churchill Ltd
+ * Derived from pxa2xx_mainstone.c, by Nico Pitre
+ *
+ * Various modification by Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/balloon3.h>
+
+#include "soc_common.h"
+
+/*
+ * These are a list of interrupt sources that provokes a polled
+ * check of status
+ */
+static struct pcmcia_irqs irqs[] = {
+ { 0, BALLOON3_S0_CD_IRQ, "PCMCIA0 CD" },
+ { 0, BALLOON3_BP_NSTSCHG_IRQ, "PCMCIA0 STSCHG" },
+};
+
+static int balloon3_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+ uint16_t ver;
+ int ret;
+ static void __iomem *fpga_ver;
+
+ ver = __raw_readw(BALLOON3_FPGA_VER);
+ if (ver > 0x0201)
+ pr_warn("The FPGA code, version 0x%04x, is newer than rel-0.3. "
+ "PCMCIA/CF support might be broken in this version!",
+ ver);
+
+ skt->socket.pci_irq = BALLOON3_BP_CF_NRDY_IRQ;
+ return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static void balloon3_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+ soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static unsigned long balloon3_pcmcia_status[2] = {
+ BALLOON3_CF_nSTSCHG_BVD1,
+ BALLOON3_CF_nSTSCHG_BVD1
+};
+
+static void balloon3_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+ struct pcmcia_state *state)
+{
+ uint16_t status;
+ int flip;
+
+ /* This actually reads the STATUS register */
+ status = __raw_readw(BALLOON3_CF_STATUS_REG);
+ flip = (status ^ balloon3_pcmcia_status[skt->nr])
+ & BALLOON3_CF_nSTSCHG_BVD1;
+ /*
+ * Workaround for STSCHG which can't be deasserted:
+ * We therefore disable/enable corresponding IRQs
+ * as needed to avoid IRQ locks.
+ */
+ if (flip) {
+ balloon3_pcmcia_status[skt->nr] = status;
+ if (status & BALLOON3_CF_nSTSCHG_BVD1)
+ enable_irq(BALLOON3_BP_NSTSCHG_IRQ);
+ else
+ disable_irq(BALLOON3_BP_NSTSCHG_IRQ);
+ }
+
+ state->detect = !gpio_get_value(BALLOON3_GPIO_S0_CD);
+ state->ready = !!(status & BALLOON3_CF_nIRQ);
+ state->bvd1 = !!(status & BALLOON3_CF_nSTSCHG_BVD1);
+ state->bvd2 = 0; /* not available */
+ state->vs_3v = 1; /* Always true its a CF card */
+ state->vs_Xv = 0; /* not available */
+ state->wrprot = 0; /* not available */
+}
+
+static int balloon3_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+ const socket_state_t *state)
+{
+ __raw_writew((state->flags & SS_RESET) ? BALLOON3_CF_RESET : 0,
+ BALLOON3_CF_CONTROL_REG);
+ return 0;
+}
+
+static void balloon3_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+}
+
+static void balloon3_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+}
+
+static struct pcmcia_low_level balloon3_pcmcia_ops = {
+ .owner = THIS_MODULE,
+ .hw_init = balloon3_pcmcia_hw_init,
+ .hw_shutdown = balloon3_pcmcia_hw_shutdown,
+ .socket_state = balloon3_pcmcia_socket_state,
+ .configure_socket = balloon3_pcmcia_configure_socket,
+ .socket_init = balloon3_pcmcia_socket_init,
+ .socket_suspend = balloon3_pcmcia_socket_suspend,
+ .first = 0,
+ .nr = 1,
+};
+
+static struct platform_device *balloon3_pcmcia_device;
+
+static int __init balloon3_pcmcia_init(void)
+{
+ int ret;
+
+ balloon3_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+ if (!balloon3_pcmcia_device)
+ return -ENOMEM;
+
+ ret = platform_device_add_data(balloon3_pcmcia_device,
+ &balloon3_pcmcia_ops, sizeof(balloon3_pcmcia_ops));
+
+ if (!ret)
+ ret = platform_device_add(balloon3_pcmcia_device);
+
+ if (ret)
+ platform_device_put(balloon3_pcmcia_device);
+
+ return ret;
+}
+
+static void __exit balloon3_pcmcia_exit(void)
+{
+ platform_device_unregister(balloon3_pcmcia_device);
+}
+
+module_init(balloon3_pcmcia_init);
+module_exit(balloon3_pcmcia_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Nick Bane <nick@cecomputing.co.uk>");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
+MODULE_DESCRIPTION("Balloon3 board CF/PCMCIA driver");
static struct work_struct bat_work;
static struct mutex work_lock;
static int bat_status = POWER_SUPPLY_STATUS_UNKNOWN;
-static struct wm97xx_batt_info *gpdata;
static enum power_supply_property *prop;
static unsigned long wm97xx_read_bat(struct power_supply *bat_ps)
struct wm97xx_pdata *wmdata = dev->dev.platform_data;
struct wm97xx_batt_pdata *pdata;
- if (gpdata) {
- dev_err(&dev->dev, "Do not pass platform_data through "
- "wm97xx_bat_set_pdata!\n");
- return -EINVAL;
- }
-
if (!wmdata) {
dev_err(&dev->dev, "No platform data supplied\n");
return -EINVAL;
platform_driver_unregister(&wm97xx_bat_driver);
}
-/* The interface is deprecated, as well as linux/wm97xx_batt.h */
-void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data);
-
-void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data)
-{
- gpdata = data;
-}
-EXPORT_SYMBOL_GPL(wm97xx_bat_set_pdata);
-
module_init(wm97xx_bat_init);
module_exit(wm97xx_bat_exit);
+++ /dev/null
-#ifndef _LINUX_WM97XX_BAT_H
-#define _LINUX_WM97XX_BAT_H
-
-#include <linux/wm97xx.h>
-
-#warning This file will be removed soon, use wm97xx.h instead!
-
-#define wm97xx_batt_info wm97xx_batt_pdata
-
-#ifdef CONFIG_BATTERY_WM97XX
-void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data);
-#else
-static inline void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data) {}
-#endif
-
-#endif