Staging: comedi: remove C99 comments in hwdrv_apci3200.c
authorBill Pemberton <wfp5p@virginia.edu>
Fri, 27 Mar 2009 15:30:07 +0000 (11:30 -0400)
committerGreg Kroah-Hartman <gregkh@suse.de>
Fri, 19 Jun 2009 18:00:28 +0000 (11:00 -0700)
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c

index 64dc68c..8981b0f 100644 (file)
@@ -57,21 +57,21 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
   +----------------------------------------------------------------------------+
 */
 #include "hwdrv_apci3200.h"
-//Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+/* Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 #include "addi_amcc_S5920.h"
-//#define PRINT_INFO
+/* #define PRINT_INFO */
 
-//End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+/* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 
-//BEGIN JK 06.07.04: Management of sevrals boards
+/* BEGIN JK 06.07.04: Management of sevrals boards */
 /*
   int i_CJCAvailable=1;
   int i_CJCPolarity=0;
-  int i_CJCGain=2;//changed from 0 to 2
+  int i_CJCGain=2;/* changed from 0 to 2 */
   int i_InterruptFlag=0;
   int i_ADDIDATAPolarity;
   int i_ADDIDATAGain;
-  int i_AutoCalibration=0;   //: auto calibration
+  int i_AutoCalibration=0;   /* : auto calibration */
   int i_ADDIDATAConversionTime;
   int i_ADDIDATAConversionTimeUnit;
   int i_ADDIDATAType;
@@ -85,12 +85,12 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
   unsigned int ui_Channel_num=0;
   static int i_Count=0;
   int i_Initialised=0;
-  unsigned int ui_InterruptChannelValue[96]; //Buffer
+  unsigned int ui_InterruptChannelValue[96]; /* Buffer */
 */
-struct str_BoardInfos s_BoardInfos[100];       // 100 will be the max number of boards to be used
-//END JK 06.07.04: Management of sevrals boards
+struct str_BoardInfos s_BoardInfos[100];       /*  100 will be the max number of boards to be used */
+/* END JK 06.07.04: Management of sevrals boards */
 
-//Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+/* Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 
 /*+----------------------------------------------------------------------------+*/
 /*| Function   Name   : int i_AddiHeaderRW_ReadEeprom                          |*/
@@ -136,15 +136,15 @@ int i_AddiHeaderRW_ReadEeprom(int i_NbOfWordsToRead,
                while (dw_eeprom_busy == EEPROM_BUSY);
 
                for (i_Counter = 0; i_Counter < 2; i_Counter++) {
-                       b_SelectedAddressLow = (w_EepromStartAddress + i_Counter) % 256;        //Read the low 8 bit part
-                       b_SelectedAddressHigh = (w_EepromStartAddress + i_Counter) / 256;       //Read the high 8 bit part
+                       b_SelectedAddressLow = (w_EepromStartAddress + i_Counter) % 256;        /* Read the low 8 bit part */
+                       b_SelectedAddressHigh = (w_EepromStartAddress + i_Counter) / 256;       /* Read the high 8 bit part */
 
-                       //Select the load low address mode
+                       /* Select the load low address mode */
                        outb(NVCMD_LOAD_LOW,
                                dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR +
                                3);
 
-                       //Wait on busy
+                       /* Wait on busy */
                        do {
                                dw_eeprom_busy =
                                        inl(dw_PCIBoardEepromAddress +
@@ -153,12 +153,12 @@ int i_AddiHeaderRW_ReadEeprom(int i_NbOfWordsToRead,
                        }
                        while (dw_eeprom_busy == EEPROM_BUSY);
 
-                       //Load the low address
+                       /* Load the low address */
                        outb(b_SelectedAddressLow,
                                dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR +
                                2);
 
-                       //Wait on busy
+                       /* Wait on busy */
                        do {
                                dw_eeprom_busy =
                                        inl(dw_PCIBoardEepromAddress +
@@ -167,12 +167,12 @@ int i_AddiHeaderRW_ReadEeprom(int i_NbOfWordsToRead,
                        }
                        while (dw_eeprom_busy == EEPROM_BUSY);
 
-                       //Select the load high address mode
+                       /* Select the load high address mode */
                        outb(NVCMD_LOAD_HIGH,
                                dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR +
                                3);
 
-                       //Wait on busy
+                       /* Wait on busy */
                        do {
                                dw_eeprom_busy =
                                        inl(dw_PCIBoardEepromAddress +
@@ -181,12 +181,12 @@ int i_AddiHeaderRW_ReadEeprom(int i_NbOfWordsToRead,
                        }
                        while (dw_eeprom_busy == EEPROM_BUSY);
 
-                       //Load the high address
+                       /* Load the high address */
                        outb(b_SelectedAddressHigh,
                                dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR +
                                2);
 
-                       //Wait on busy
+                       /* Wait on busy */
                        do {
                                dw_eeprom_busy =
                                        inl(dw_PCIBoardEepromAddress +
@@ -195,12 +195,12 @@ int i_AddiHeaderRW_ReadEeprom(int i_NbOfWordsToRead,
                        }
                        while (dw_eeprom_busy == EEPROM_BUSY);
 
-                       //Select the READ mode
+                       /* Select the READ mode */
                        outb(NVCMD_BEGIN_READ,
                                dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR +
                                3);
 
-                       //Wait on busy
+                       /* Wait on busy */
                        do {
                                dw_eeprom_busy =
                                        inl(dw_PCIBoardEepromAddress +
@@ -209,12 +209,12 @@ int i_AddiHeaderRW_ReadEeprom(int i_NbOfWordsToRead,
                        }
                        while (dw_eeprom_busy == EEPROM_BUSY);
 
-                       //Read data into the EEPROM
+                       /* Read data into the EEPROM */
                        *pb_ReadByte =
                                inb(dw_PCIBoardEepromAddress +
                                AMCC_OP_REG_MCSR + 2);
 
-                       //Wait on busy
+                       /* Wait on busy */
                        do {
                                dw_eeprom_busy =
                                        inl(dw_PCIBoardEepromAddress +
@@ -223,14 +223,14 @@ int i_AddiHeaderRW_ReadEeprom(int i_NbOfWordsToRead,
                        }
                        while (dw_eeprom_busy == EEPROM_BUSY);
 
-                       //Select the upper address part
+                       /* Select the upper address part */
                        if (i_Counter == 0) {
                                b_ReadLowByte = pb_ReadByte[0];
                        } else {
                                b_ReadHighByte = pb_ReadByte[0];
                        }
 
-                       //Sleep
+                       /* Sleep */
                        for (i = 0; i < 10000; i++) ;
 
                }
@@ -240,9 +240,9 @@ int i_AddiHeaderRW_ReadEeprom(int i_NbOfWordsToRead,
 
                pw_DataRead[i_WordCounter] = w_ReadWord;
 
-               w_EepromStartAddress += 2;      // to read the next word
+               w_EepromStartAddress += 2;      /*  to read the next word */
 
-       }                       // for (...) i_NbOfWordsToRead
+       }                       /*  for (...) i_NbOfWordsToRead */
        return (0);
 }
 
@@ -281,8 +281,8 @@ void v_GetAPCI3200EepromCalibrationValue(unsigned int dw_PCIBoardEepromAddress,
   /*****************************************/
   /** Get the Analog input header address **/
   /*****************************************/
-       i_AddiHeaderRW_ReadEeprom(1,    //i_NbOfWordsToRead
-               dw_PCIBoardEepromAddress, 0x116,        //w_EepromStartAddress: Analog input header address
+       i_AddiHeaderRW_ReadEeprom(1,    /* i_NbOfWordsToRead */
+               dw_PCIBoardEepromAddress, 0x116,        /* w_EepromStartAddress: Analog input header address */
                &w_AnalogInputMainHeaderAddress);
 
   /*******************************************/
@@ -293,8 +293,8 @@ void v_GetAPCI3200EepromCalibrationValue(unsigned int dw_PCIBoardEepromAddress,
   /******************************/
   /** Get the number of moduls **/
   /******************************/
-       i_AddiHeaderRW_ReadEeprom(1,    //i_NbOfWordsToRead
-               dw_PCIBoardEepromAddress, w_AnalogInputMainHeaderAddress + 0x02,        //w_EepromStartAddress: Number of conponment
+       i_AddiHeaderRW_ReadEeprom(1,    /* i_NbOfWordsToRead */
+               dw_PCIBoardEepromAddress, w_AnalogInputMainHeaderAddress + 0x02,        /* w_EepromStartAddress: Number of conponment */
                &w_NumberOfModuls);
 
        for (w_ModulCounter = 0; w_ModulCounter < w_NumberOfModuls;
@@ -309,8 +309,8 @@ void v_GetAPCI3200EepromCalibrationValue(unsigned int dw_PCIBoardEepromAddress,
       /****************************/
       /** Read first header size **/
       /****************************/
-               i_AddiHeaderRW_ReadEeprom(1,    //i_NbOfWordsToRead
-                       dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress,        // Address of the first header
+               i_AddiHeaderRW_ReadEeprom(1,    /* i_NbOfWordsToRead */
+                       dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress,        /*  Address of the first header */
                        &w_FirstHeaderSize);
 
                w_FirstHeaderSize = w_FirstHeaderSize >> 4;
@@ -318,8 +318,8 @@ void v_GetAPCI3200EepromCalibrationValue(unsigned int dw_PCIBoardEepromAddress,
       /***************************/
       /** Read number of inputs **/
       /***************************/
-               i_AddiHeaderRW_ReadEeprom(1,    //i_NbOfWordsToRead
-                       dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 0x06, // Number of inputs for the first modul
+               i_AddiHeaderRW_ReadEeprom(1,    /* i_NbOfWordsToRead */
+                       dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 0x06, /*  Number of inputs for the first modul */
                        &w_NumberOfInputs);
 
                w_NumberOfInputs = w_NumberOfInputs >> 4;
@@ -327,17 +327,17 @@ void v_GetAPCI3200EepromCalibrationValue(unsigned int dw_PCIBoardEepromAddress,
       /***********************/
       /** Read the CJC flag **/
       /***********************/
-               i_AddiHeaderRW_ReadEeprom(1,    //i_NbOfWordsToRead
-                       dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 0x08, // CJC flag
+               i_AddiHeaderRW_ReadEeprom(1,    /* i_NbOfWordsToRead */
+                       dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 0x08, /*  CJC flag */
                        &w_CJCFlag);
 
-               w_CJCFlag = (w_CJCFlag >> 3) & 0x1;     // Get only the CJC flag
+               w_CJCFlag = (w_CJCFlag >> 3) & 0x1;     /*  Get only the CJC flag */
 
       /*******************************/
       /** Read number of gain value **/
       /*******************************/
-               i_AddiHeaderRW_ReadEeprom(1,    //i_NbOfWordsToRead
-                       dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 0x44, // Number of gain value
+               i_AddiHeaderRW_ReadEeprom(1,    /* i_NbOfWordsToRead */
+                       dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 0x44, /*  Number of gain value */
                        &w_NumberOfGainValue);
 
                w_NumberOfGainValue = w_NumberOfGainValue & 0xFF;
@@ -354,8 +354,8 @@ void v_GetAPCI3200EepromCalibrationValue(unsigned int dw_PCIBoardEepromAddress,
       /********************************************/
       /** Read current sources value for input 1 **/
       /********************************************/
-               i_AddiHeaderRW_ReadEeprom(1,    //i_NbOfWordsToRead
-                       dw_PCIBoardEepromAddress, w_SingleHeaderAddress,        //w_EepromStartAddress: Single header address
+               i_AddiHeaderRW_ReadEeprom(1,    /* i_NbOfWordsToRead */
+                       dw_PCIBoardEepromAddress, w_SingleHeaderAddress,        /* w_EepromStartAddress: Single header address */
                        &w_SingleHeaderSize);
 
                w_SingleHeaderSize = w_SingleHeaderSize >> 4;
@@ -370,8 +370,8 @@ void v_GetAPCI3200EepromCalibrationValue(unsigned int dw_PCIBoardEepromAddress,
          /************************************/
          /** Read gain value for the module **/
          /************************************/
-                       i_AddiHeaderRW_ReadEeprom(1,    //i_NbOfWordsToRead
-                               dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 70 + (2 * (1 + (w_NumberOfGainValue / 16))) + (0x02 * w_GainIndex),   // Gain value
+                       i_AddiHeaderRW_ReadEeprom(1,    /* i_NbOfWordsToRead */
+                               dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 70 + (2 * (1 + (w_NumberOfGainValue / 16))) + (0x02 * w_GainIndex),   /*  Gain value */
                                &w_GainValue);
 
                        BoardInformations->s_Module[w_ModulCounter].
@@ -386,8 +386,8 @@ void v_GetAPCI3200EepromCalibrationValue(unsigned int dw_PCIBoardEepromAddress,
          /*************************************/
          /** Read gain factor for the module **/
          /*************************************/
-                       i_AddiHeaderRW_ReadEeprom(2,    //i_NbOfWordsToRead
-                               dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 70 + ((2 * w_NumberOfGainValue) + (2 * (1 + (w_NumberOfGainValue / 16)))) + (0x04 * w_GainIndex),     // Gain factor
+                       i_AddiHeaderRW_ReadEeprom(2,    /* i_NbOfWordsToRead */
+                               dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 70 + ((2 * w_NumberOfGainValue) + (2 * (1 + (w_NumberOfGainValue / 16)))) + (0x04 * w_GainIndex),     /*  Gain factor */
                                w_GainFactorValue);
 
                        BoardInformations->s_Module[w_ModulCounter].
@@ -409,7 +409,7 @@ void v_GetAPCI3200EepromCalibrationValue(unsigned int dw_PCIBoardEepromAddress,
          /********************************************/
          /** Read current sources value for input 1 **/
          /********************************************/
-                       i_AddiHeaderRW_ReadEeprom(2,    //i_NbOfWordsToRead
+                       i_AddiHeaderRW_ReadEeprom(2,    /* i_NbOfWordsToRead */
                                dw_PCIBoardEepromAddress,
                                (w_Input * w_SingleHeaderSize) +
                                w_SingleHeaderAddress + 0x0C, w_CurrentSources);
@@ -432,7 +432,7 @@ void v_GetAPCI3200EepromCalibrationValue(unsigned int dw_PCIBoardEepromAddress,
       /***************************************/
       /** Read the CJC current source value **/
       /***************************************/
-               i_AddiHeaderRW_ReadEeprom(2,    //i_NbOfWordsToRead
+               i_AddiHeaderRW_ReadEeprom(2,    /* i_NbOfWordsToRead */
                        dw_PCIBoardEepromAddress,
                        (w_Input * w_SingleHeaderSize) + w_SingleHeaderAddress +
                        0x0C, w_CurrentSources);
@@ -464,9 +464,9 @@ int i_APCI3200_GetChannelCalibrationValue(struct comedi_device * dev,
        printk("\n Channel = %u", ui_Channel_num);
 #endif
 
-       //Test if single or differential mode
+       /* Test if single or differential mode */
        if (s_BoardInfos[dev->minor].i_ConnectionType == 1) {
-               //if diff
+               /* if diff */
 
                if ((ui_Channel_num >= 0) && (ui_Channel_num <= 1))
                        i_DiffChannel = ui_Channel_num, i_Module = 0;
@@ -478,7 +478,7 @@ int i_APCI3200_GetChannelCalibrationValue(struct comedi_device * dev,
                        i_DiffChannel = ui_Channel_num - 6, i_Module = 3;
 
        } else {
-               // if single
+               /*  if single */
                if ((ui_Channel_num == 0) || (ui_Channel_num == 1))
                        i_DiffChannel = 0, i_Module = 0;
                else if ((ui_Channel_num == 2) || (ui_Channel_num == 3))
@@ -497,7 +497,7 @@ int i_APCI3200_GetChannelCalibrationValue(struct comedi_device * dev,
                        i_DiffChannel = 1, i_Module = 3;
        }
 
-       //Test if thermocouple or RTD mode
+       /* Test if thermocouple or RTD mode */
        *CJCCurrentSource =
                s_BoardInfos[dev->minor].s_Module[i_Module].ul_CurrentSourceCJC;
 #ifdef PRINT_INFO
@@ -510,22 +510,22 @@ int i_APCI3200_GetChannelCalibrationValue(struct comedi_device * dev,
 #ifdef PRINT_INFO
        printk("\n ChannelCurrentSource = %lu", *ChannelCurrentSource);
 #endif
-       //      }
-       //   }
+       /*       } */
+       /*    } */
 
-       //Channle gain factor
+       /* Channle gain factor */
        *ChannelGainFactor =
                s_BoardInfos[dev->minor].s_Module[i_Module].
                ul_GainFactor[s_BoardInfos[dev->minor].i_ADDIDATAGain];
 #ifdef PRINT_INFO
        printk("\n ChannelGainFactor = %lu", *ChannelGainFactor);
 #endif
-       //End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+       /* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 
        return (0);
 }
 
-//End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+/* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 
 /*
   +----------------------------------------------------------------------------+
@@ -561,13 +561,13 @@ int i_APCI3200_ReadDigitalInput(struct comedi_device * dev, struct comedi_subdev
 
        if (ui_Temp == 0) {
                *data = (*data >> ui_NoOfChannel) & 0x1;
-       }                       //if  (ui_Temp==0)
+       }                       /* if  (ui_Temp==0) */
        else {
                if (ui_Temp == 1) {
                        if (data[1] < 0 || data[1] > 1) {
                                printk("\nThe port number is in error\n");
                                return -EINVAL;
-                       }       //if(data[1] < 0 || data[1] >1)
+                       }       /* if(data[1] < 0 || data[1] >1) */
                        switch (ui_NoOfChannel) {
 
                        case 2:
@@ -578,13 +578,13 @@ int i_APCI3200_ReadDigitalInput(struct comedi_device * dev, struct comedi_subdev
                                break;
                        default:
                                comedi_error(dev, " chan spec wrong");
-                               return -EINVAL; // "sorry channel spec wrong "
+                               return -EINVAL; /*  "sorry channel spec wrong " */
 
-                       }       //switch(ui_NoOfChannels)
-               }               //if  (ui_Temp==1)
+                       }       /* switch(ui_NoOfChannels) */
+               }               /* if  (ui_Temp==1) */
                else {
                        printk("\nSpecified channel not supported \n");
-               }               //elseif  (ui_Temp==1)
+               }               /* elseif  (ui_Temp==1) */
        }
        return insn->n;
 }
@@ -616,13 +616,13 @@ int i_APCI3200_ConfigDigitalOutput(struct comedi_device * dev, struct comedi_sub
                comedi_error(dev,
                        "Not a valid Data !!! ,Data should be 1 or 0\n");
                return -EINVAL;
-       }                       //if  ( (data[0]!=0) && (data[0]!=1) )
+       }                       /* if  ( (data[0]!=0) && (data[0]!=1) ) */
        if (data[0]) {
                devpriv->b_OutputMemoryStatus = ADDIDATA_ENABLE;
-       }                       // if  (data[0])
+       }                       /*  if  (data[0]) */
        else {
                devpriv->b_OutputMemoryStatus = ADDIDATA_DISABLE;
-       }                       //else if  (data[0])
+       }                       /* else if  (data[0]) */
        return insn->n;
 }
 
@@ -657,19 +657,19 @@ int i_APCI3200_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
        struct comedi_insn * insn, unsigned int * data)
 {
        unsigned int ui_Temp = 0, ui_Temp1 = 0;
-       unsigned int ui_NoOfChannel = CR_CHAN(insn->chanspec);  // get the channel
+       unsigned int ui_NoOfChannel = CR_CHAN(insn->chanspec);  /*  get the channel */
        if (devpriv->b_OutputMemoryStatus) {
                ui_Temp = inl(devpriv->i_IobaseAddon);
 
-       }                       //if(devpriv->b_OutputMemoryStatus )
+       }                       /* if(devpriv->b_OutputMemoryStatus ) */
        else {
                ui_Temp = 0;
-       }                       //if(devpriv->b_OutputMemoryStatus )
+       }                       /* if(devpriv->b_OutputMemoryStatus ) */
        if (data[3] == 0) {
                if (data[1] == 0) {
                        data[0] = (data[0] << ui_NoOfChannel) | ui_Temp;
                        outl(data[0], devpriv->i_IobaseAddon);
-               }               //if(data[1]==0)
+               }               /* if(data[1]==0) */
                else {
                        if (data[1] == 1) {
                                switch (ui_NoOfChannel) {
@@ -682,15 +682,15 @@ int i_APCI3200_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
                                case 3:
                                        data[0] = (data[0] | ui_Temp);
                                        break;
-                               }       //switch(ui_NoOfChannels)
+                               }       /* switch(ui_NoOfChannels) */
 
                                outl(data[0], devpriv->i_IobaseAddon);
-                       }       // if(data[1]==1)
+                       }       /*  if(data[1]==1) */
                        else {
                                printk("\nSpecified channel not supported\n");
-                       }       //else if(data[1]==1)
-               }               //elseif(data[1]==0)
-       }                       //if(data[3]==0)
+                       }       /* else if(data[1]==1) */
+               }               /* elseif(data[1]==0) */
+       }                       /* if(data[3]==0) */
        else {
                if (data[3] == 1) {
                        if (data[1] == 0) {
@@ -701,7 +701,7 @@ int i_APCI3200_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
                                data[0] = (data[0] << ui_NoOfChannel) ^ 0xf;
                                data[0] = data[0] & ui_Temp;
                                outl(data[0], devpriv->i_IobaseAddon);
-                       }       //if(data[1]==0)
+                       }       /* if(data[1]==0) */
                        else {
                                if (data[1] == 1) {
                                        switch (ui_NoOfChannel) {
@@ -725,21 +725,21 @@ int i_APCI3200_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
                                        default:
                                                comedi_error(dev,
                                                        " chan spec wrong");
-                                               return -EINVAL; // "sorry channel spec wrong "
-                                       }       //switch(ui_NoOfChannels)
+                                               return -EINVAL; /*  "sorry channel spec wrong " */
+                                       }       /* switch(ui_NoOfChannels) */
 
                                        outl(data[0], devpriv->i_IobaseAddon);
-                               }       // if(data[1]==1)
+                               }       /*  if(data[1]==1) */
                                else {
                                        printk("\nSpecified channel not supported\n");
-                               }       //else if(data[1]==1)
-                       }       //elseif(data[1]==0)
-               }               //if(data[3]==1);
+                               }       /* else if(data[1]==1) */
+                       }       /* elseif(data[1]==0) */
+               }               /* if(data[3]==1); */
                else {
                        printk("\nSpecified functionality does not exist\n");
                        return -EINVAL;
-               }               //if else data[3]==1)
-       }                       //if else data[3]==0)
+               }               /* if else data[3]==1) */
+       }                       /* if else data[3]==0) */
        return insn->n;
 }
 
@@ -776,13 +776,13 @@ int i_APCI3200_ReadDigitalOutput(struct comedi_device * dev, struct comedi_subde
        *data = inl(devpriv->i_IobaseAddon);
        if (ui_Temp == 0) {
                *data = (*data >> ui_NoOfChannel) & 0x1;
-       }                       // if  (ui_Temp==0)
+       }                       /*  if  (ui_Temp==0) */
        else {
                if (ui_Temp == 1) {
                        if (data[1] < 0 || data[1] > 1) {
                                printk("\nThe port selection is in error\n");
                                return -EINVAL;
-                       }       //if(data[1] <0 ||data[1] >1)
+                       }       /* if(data[1] <0 ||data[1] >1) */
                        switch (ui_NoOfChannel) {
                        case 2:
                                *data = (*data >> (2 * data[1])) & 3;
@@ -793,14 +793,14 @@ int i_APCI3200_ReadDigitalOutput(struct comedi_device * dev, struct comedi_subde
 
                        default:
                                comedi_error(dev, " chan spec wrong");
-                               return -EINVAL; // "sorry channel spec wrong "
+                               return -EINVAL; /*  "sorry channel spec wrong " */
                                break;
-                       }       // switch(ui_NoOfChannels)
-               }               // if  (ui_Temp==1)
+                       }       /*  switch(ui_NoOfChannels) */
+               }               /*  if  (ui_Temp==1) */
                else {
                        printk("\nSpecified channel not supported \n");
-               }               // else if (ui_Temp==1)
-       }                       // else if  (ui_Temp==0)
+               }               /*  else if (ui_Temp==1) */
+       }                       /*  else if  (ui_Temp==0) */
        return insn->n;
 }
 
@@ -883,21 +883,21 @@ int i_APCI3200_ConfigAnalogInput(struct comedi_device * dev, struct comedi_subde
        unsigned int ui_Dummy = 0;
        int i_err = 0;
 
-       //Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+       /* Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 
 #ifdef PRINT_INFO
        int i = 0, i2 = 0;
 #endif
-       //End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+       /* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 
-       //BEGIN JK 06.07.04: Management of sevrals boards
-       // Initialize the structure
+       /* BEGIN JK 06.07.04: Management of sevrals boards */
+       /*  Initialize the structure */
        if (s_BoardInfos[dev->minor].b_StructInitialized != 1) {
                s_BoardInfos[dev->minor].i_CJCAvailable = 1;
                s_BoardInfos[dev->minor].i_CJCPolarity = 0;
-               s_BoardInfos[dev->minor].i_CJCGain = 2; //changed from 0 to 2
+               s_BoardInfos[dev->minor].i_CJCGain = 2; /* changed from 0 to 2 */
                s_BoardInfos[dev->minor].i_InterruptFlag = 0;
-               s_BoardInfos[dev->minor].i_AutoCalibration = 0; //: auto calibration
+               s_BoardInfos[dev->minor].i_AutoCalibration = 0; /* : auto calibration */
                s_BoardInfos[dev->minor].i_ChannelCount = 0;
                s_BoardInfos[dev->minor].i_Sum = 0;
                s_BoardInfos[dev->minor].ui_Channel_num = 0;
@@ -905,11 +905,11 @@ int i_APCI3200_ConfigAnalogInput(struct comedi_device * dev, struct comedi_subde
                s_BoardInfos[dev->minor].i_Initialised = 0;
                s_BoardInfos[dev->minor].b_StructInitialized = 1;
 
-               //Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+               /* Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
                s_BoardInfos[dev->minor].i_ConnectionType = 0;
-               //End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+               /* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 
-               //Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+               /* Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
                memset(s_BoardInfos[dev->minor].s_Module, 0,
                        sizeof(s_BoardInfos[dev->minor].s_Module[MAX_MODULE]));
 
@@ -938,72 +938,72 @@ int i_APCI3200_ConfigAnalogInput(struct comedi_device * dev, struct comedi_subde
                        }
                }
 #endif
-               //End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+               /* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
        }
 
        if (data[0] != 0 && data[0] != 1 && data[0] != 2) {
                printk("\nThe selection of acquisition type is in error\n");
                i_err++;
-       }                       //if(data[0]!=0 && data[0]!=1 && data[0]!=2)
+       }                       /* if(data[0]!=0 && data[0]!=1 && data[0]!=2) */
        if (data[0] == 1) {
                if (data[14] != 0 && data[14] != 1 && data[14] != 2
                        && data[14] != 4) {
                        printk("\n Error in selection of RTD connection type\n");
                        i_err++;
-               }               //if(data[14]!=0 && data[14]!=1 && data[14]!=2 && data[14]!=4)
-       }                       //if(data[0]==1 )
+               }               /* if(data[14]!=0 && data[14]!=1 && data[14]!=2 && data[14]!=4) */
+       }                       /* if(data[0]==1 ) */
        if (data[1] < 0 || data[1] > 7) {
                printk("\nThe selection of gain is in error\n");
                i_err++;
-       }                       // if(data[1]<0 || data[1]>7)
+       }                       /*  if(data[1]<0 || data[1]>7) */
        if (data[2] != 0 && data[2] != 1) {
                printk("\nThe selection of polarity is in error\n");
                i_err++;
-       }                       //if(data[2]!=0 &&  data[2]!=1)
+       }                       /* if(data[2]!=0 &&  data[2]!=1) */
        if (data[3] != 0) {
                printk("\nThe selection of offset range  is in error\n");
                i_err++;
-       }                       // if(data[3]!=0)
+       }                       /*  if(data[3]!=0) */
        if (data[4] != 0 && data[4] != 1) {
                printk("\nThe selection of coupling is in error\n");
                i_err++;
-       }                       //if(data[4]!=0 &&  data[4]!=1)
+       }                       /* if(data[4]!=0 &&  data[4]!=1) */
        if (data[5] != 0 && data[5] != 1) {
                printk("\nThe selection of single/differential mode is in error\n");
                i_err++;
-       }                       //if(data[5]!=0 &&  data[5]!=1)
+       }                       /* if(data[5]!=0 &&  data[5]!=1) */
        if (data[8] != 0 && data[8] != 1 && data[2] != 2) {
                printk("\nError in selection of functionality\n");
-       }                       //if(data[8]!=0 && data[8]!=1 && data[2]!=2)
+       }                       /* if(data[8]!=0 && data[8]!=1 && data[2]!=2) */
        if (data[12] == 0 || data[12] == 1) {
                if (data[6] != 20 && data[6] != 40 && data[6] != 80
                        && data[6] != 160) {
                        printk("\nThe selection of conversion time reload value is in error\n");
                        i_err++;
-               }               // if (data[6]!=20 && data[6]!=40 && data[6]!=80 && data[6]!=160 )
+               }               /*  if (data[6]!=20 && data[6]!=40 && data[6]!=80 && data[6]!=160 ) */
                if (data[7] != 2) {
                        printk("\nThe selection of conversion time unit  is in error\n");
                        i_err++;
-               }               // if(data[7]!=2)
+               }               /*  if(data[7]!=2) */
        }
        if (data[9] != 0 && data[9] != 1) {
                printk("\nThe selection of interrupt enable is in error\n");
                i_err++;
-       }                       //if(data[9]!=0 &&  data[9]!=1)
+       }                       /* if(data[9]!=0 &&  data[9]!=1) */
        if (data[11] < 0 || data[11] > 4) {
                printk("\nThe selection of module is in error\n");
                i_err++;
-       }                       //if(data[11] <0 ||  data[11]>1)
+       }                       /* if(data[11] <0 ||  data[11]>1) */
        if (data[12] < 0 || data[12] > 3) {
                printk("\nThe selection of singlechannel/scan selection is in error\n");
                i_err++;
-       }                       //if(data[12] < 0 ||  data[12]> 3)
+       }                       /* if(data[12] < 0 ||  data[12]> 3) */
        if (data[13] < 0 || data[13] > 16) {
                printk("\nThe selection of number of channels is in error\n");
                i_err++;
-       }                       // if(data[13] <0 ||data[13] >15)
+       }                       /*  if(data[13] <0 ||data[13] >15) */
 
-       //BEGIN JK 06.07.04: Management of sevrals boards
+       /* BEGIN JK 06.07.04: Management of sevrals boards */
        /*
           i_ChannelCount=data[13];
           i_ScanType=data[12];
@@ -1014,7 +1014,7 @@ int i_APCI3200_ConfigAnalogInput(struct comedi_device * dev, struct comedi_subde
           i_ADDIDATAType=data[0];
         */
 
-       // Save acquisition configuration for the actual board
+       /*  Save acquisition configuration for the actual board */
        s_BoardInfos[dev->minor].i_ChannelCount = data[13];
        s_BoardInfos[dev->minor].i_ScanType = data[12];
        s_BoardInfos[dev->minor].i_ADDIDATAPolarity = data[2];
@@ -1022,307 +1022,307 @@ int i_APCI3200_ConfigAnalogInput(struct comedi_device * dev, struct comedi_subde
        s_BoardInfos[dev->minor].i_ADDIDATAConversionTime = data[6];
        s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit = data[7];
        s_BoardInfos[dev->minor].i_ADDIDATAType = data[0];
-       //Begin JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
+       /* Begin JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
        s_BoardInfos[dev->minor].i_ConnectionType = data[5];
-       //End JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
-       //END JK 06.07.04: Management of sevrals boards
+       /* End JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+       /* END JK 06.07.04: Management of sevrals boards */
 
-       //Begin JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
-       memset(s_BoardInfos[dev->minor].ui_ScanValueArray, 0, (7 + 12) * sizeof(unsigned int)); // 7 is the maximal number of channels
-       //End JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
+       /* Begin JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+       memset(s_BoardInfos[dev->minor].ui_ScanValueArray, 0, (7 + 12) * sizeof(unsigned int)); /*  7 is the maximal number of channels */
+       /* End JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
 
-       //BEGIN JK 02.07.04 : This while can't be do, it block the process when using severals boards
-       //while(i_InterruptFlag==1)
+       /* BEGIN JK 02.07.04 : This while can't be do, it block the process when using severals boards */
+       /* while(i_InterruptFlag==1) */
        while (s_BoardInfos[dev->minor].i_InterruptFlag == 1) {
 #ifndef MSXBOX
                udelay(1);
 #else
-               // In the case where the driver is compiled for the MSX-Box
-               // we used a printk to have a little delay because udelay
-               // seems to be broken under the MSX-Box.
-               // This solution hat to be studied.
+               /*  In the case where the driver is compiled for the MSX-Box */
+               /*  we used a printk to have a little delay because udelay */
+               /*  seems to be broken under the MSX-Box. */
+               /*  This solution hat to be studied. */
                printk("");
 #endif
        }
-       //END JK 02.07.04 : This while can't be do, it block the process when using severals boards
+       /* END JK 02.07.04 : This while can't be do, it block the process when using severals boards */
 
-       ui_ChannelNo = CR_CHAN(insn->chanspec); // get the channel
-       //BEGIN JK 06.07.04: Management of sevrals boards
-       //i_ChannelNo=ui_ChannelNo;
-       //ui_Channel_num =ui_ChannelNo;
+       ui_ChannelNo = CR_CHAN(insn->chanspec); /*  get the channel */
+       /* BEGIN JK 06.07.04: Management of sevrals boards */
+       /* i_ChannelNo=ui_ChannelNo; */
+       /* ui_Channel_num =ui_ChannelNo; */
 
        s_BoardInfos[dev->minor].i_ChannelNo = ui_ChannelNo;
        s_BoardInfos[dev->minor].ui_Channel_num = ui_ChannelNo;
 
-       //END JK 06.07.04: Management of sevrals boards
+       /* END JK 06.07.04: Management of sevrals boards */
 
        if (data[5] == 0) {
                if (ui_ChannelNo < 0 || ui_ChannelNo > 15) {
                        printk("\nThe Selection of the channel is in error\n");
                        i_err++;
-               }               // if(ui_ChannelNo<0 || ui_ChannelNo>15)
-       }                       //if(data[5]==0)
+               }               /*  if(ui_ChannelNo<0 || ui_ChannelNo>15) */
+       }                       /* if(data[5]==0) */
        else {
                if (data[14] == 2) {
                        if (ui_ChannelNo < 0 || ui_ChannelNo > 3) {
                                printk("\nThe Selection of the channel is in error\n");
                                i_err++;
-                       }       // if(ui_ChannelNo<0 || ui_ChannelNo>3)
-               }               //if(data[14]==2)
+                       }       /*  if(ui_ChannelNo<0 || ui_ChannelNo>3) */
+               }               /* if(data[14]==2) */
                else {
                        if (ui_ChannelNo < 0 || ui_ChannelNo > 7) {
                                printk("\nThe Selection of the channel is in error\n");
                                i_err++;
-                       }       // if(ui_ChannelNo<0 || ui_ChannelNo>7)
-               }               //elseif(data[14]==2)
-       }                       //elseif(data[5]==0)
+                       }       /*  if(ui_ChannelNo<0 || ui_ChannelNo>7) */
+               }               /* elseif(data[14]==2) */
+       }                       /* elseif(data[5]==0) */
        if (data[12] == 0 || data[12] == 1) {
                switch (data[5]) {
                case 0:
                        if (ui_ChannelNo >= 0 && ui_ChannelNo <= 3) {
-                               //BEGIN JK 06.07.04: Management of sevrals boards
-                               //i_Offset=0;
+                               /* BEGIN JK 06.07.04: Management of sevrals boards */
+                               /* i_Offset=0; */
                                s_BoardInfos[dev->minor].i_Offset = 0;
-                               //END JK 06.07.04: Management of sevrals boards
-                       }       //if(ui_ChannelNo >=0 && ui_ChannelNo <=3)
+                               /* END JK 06.07.04: Management of sevrals boards */
+                       }       /* if(ui_ChannelNo >=0 && ui_ChannelNo <=3) */
                        if (ui_ChannelNo >= 4 && ui_ChannelNo <= 7) {
-                               //BEGIN JK 06.07.04: Management of sevrals boards
-                               //i_Offset=64;
+                               /* BEGIN JK 06.07.04: Management of sevrals boards */
+                               /* i_Offset=64; */
                                s_BoardInfos[dev->minor].i_Offset = 64;
-                               //END JK 06.07.04: Management of sevrals boards
-                       }       //if(ui_ChannelNo >=4 && ui_ChannelNo <=7)
+                               /* END JK 06.07.04: Management of sevrals boards */
+                       }       /* if(ui_ChannelNo >=4 && ui_ChannelNo <=7) */
                        if (ui_ChannelNo >= 8 && ui_ChannelNo <= 11) {
-                               //BEGIN JK 06.07.04: Management of sevrals boards
-                               //i_Offset=128;
+                               /* BEGIN JK 06.07.04: Management of sevrals boards */
+                               /* i_Offset=128; */
                                s_BoardInfos[dev->minor].i_Offset = 128;
-                               //END JK 06.07.04: Management of sevrals boards
-                       }       //if(ui_ChannelNo >=8 && ui_ChannelNo <=11)
+                               /* END JK 06.07.04: Management of sevrals boards */
+                       }       /* if(ui_ChannelNo >=8 && ui_ChannelNo <=11) */
                        if (ui_ChannelNo >= 12 && ui_ChannelNo <= 15) {
-                               //BEGIN JK 06.07.04: Management of sevrals boards
-                               //i_Offset=192;
+                               /* BEGIN JK 06.07.04: Management of sevrals boards */
+                               /* i_Offset=192; */
                                s_BoardInfos[dev->minor].i_Offset = 192;
-                               //END JK 06.07.04: Management of sevrals boards
-                       }       //if(ui_ChannelNo >=12 && ui_ChannelNo <=15)
+                               /* END JK 06.07.04: Management of sevrals boards */
+                       }       /* if(ui_ChannelNo >=12 && ui_ChannelNo <=15) */
                        break;
                case 1:
                        if (data[14] == 2) {
                                if (ui_ChannelNo == 0) {
-                                       //BEGIN JK 06.07.04: Management of sevrals boards
-                                       //i_Offset=0;
+                                       /* BEGIN JK 06.07.04: Management of sevrals boards */
+                                       /* i_Offset=0; */
                                        s_BoardInfos[dev->minor].i_Offset = 0;
-                                       //END JK 06.07.04: Management of sevrals boards
-                               }       //if(ui_ChannelNo ==0 )
+                                       /* END JK 06.07.04: Management of sevrals boards */
+                               }       /* if(ui_ChannelNo ==0 ) */
                                if (ui_ChannelNo == 1) {
-                                       //BEGIN JK 06.07.04: Management of sevrals boards
-                                       //i_Offset=0;
+                                       /* BEGIN JK 06.07.04: Management of sevrals boards */
+                                       /* i_Offset=0; */
                                        s_BoardInfos[dev->minor].i_Offset = 64;
-                                       //END JK 06.07.04: Management of sevrals boards
-                               }       // if(ui_ChannelNo ==1)
+                                       /* END JK 06.07.04: Management of sevrals boards */
+                               }       /*  if(ui_ChannelNo ==1) */
                                if (ui_ChannelNo == 2) {
-                                       //BEGIN JK 06.07.04: Management of sevrals boards
-                                       //i_Offset=128;
+                                       /* BEGIN JK 06.07.04: Management of sevrals boards */
+                                       /* i_Offset=128; */
                                        s_BoardInfos[dev->minor].i_Offset = 128;
-                                       //END JK 06.07.04: Management of sevrals boards
-                               }       //if(ui_ChannelNo ==2 )
+                                       /* END JK 06.07.04: Management of sevrals boards */
+                               }       /* if(ui_ChannelNo ==2 ) */
                                if (ui_ChannelNo == 3) {
-                                       //BEGIN JK 06.07.04: Management of sevrals boards
-                                       //i_Offset=192;
+                                       /* BEGIN JK 06.07.04: Management of sevrals boards */
+                                       /* i_Offset=192; */
                                        s_BoardInfos[dev->minor].i_Offset = 192;
-                                       //END JK 06.07.04: Management of sevrals boards
-                               }       //if(ui_ChannelNo ==3)
+                                       /* END JK 06.07.04: Management of sevrals boards */
+                               }       /* if(ui_ChannelNo ==3) */
 
-                               //BEGIN JK 06.07.04: Management of sevrals boards
-                               //i_ChannelNo=0;
+                               /* BEGIN JK 06.07.04: Management of sevrals boards */
+                               /* i_ChannelNo=0; */
                                s_BoardInfos[dev->minor].i_ChannelNo = 0;
-                               //END JK 06.07.04: Management of sevrals boards
+                               /* END JK 06.07.04: Management of sevrals boards */
                                ui_ChannelNo = 0;
                                break;
-                       }       //if(data[14]==2)
+                       }       /* if(data[14]==2) */
                        if (ui_ChannelNo >= 0 && ui_ChannelNo <= 1) {
-                               //BEGIN JK 06.07.04: Management of sevrals boards
-                               //i_Offset=0;
+                               /* BEGIN JK 06.07.04: Management of sevrals boards */
+                               /* i_Offset=0; */
                                s_BoardInfos[dev->minor].i_Offset = 0;
-                               //END JK 06.07.04: Management of sevrals boards
-                       }       //if(ui_ChannelNo >=0 && ui_ChannelNo <=1)
+                               /* END JK 06.07.04: Management of sevrals boards */
+                       }       /* if(ui_ChannelNo >=0 && ui_ChannelNo <=1) */
                        if (ui_ChannelNo >= 2 && ui_ChannelNo <= 3) {
-                               //BEGIN JK 06.07.04: Management of sevrals boards
-                               //i_ChannelNo=i_ChannelNo-2;
-                               //i_Offset=64;
+                               /* BEGIN JK 06.07.04: Management of sevrals boards */
+                               /* i_ChannelNo=i_ChannelNo-2; */
+                               /* i_Offset=64; */
                                s_BoardInfos[dev->minor].i_ChannelNo =
                                        s_BoardInfos[dev->minor].i_ChannelNo -
                                        2;
                                s_BoardInfos[dev->minor].i_Offset = 64;
-                               //END JK 06.07.04: Management of sevrals boards
+                               /* END JK 06.07.04: Management of sevrals boards */
                                ui_ChannelNo = ui_ChannelNo - 2;
-                       }       //if(ui_ChannelNo >=2 && ui_ChannelNo <=3)
+                       }       /* if(ui_ChannelNo >=2 && ui_ChannelNo <=3) */
                        if (ui_ChannelNo >= 4 && ui_ChannelNo <= 5) {
-                               //BEGIN JK 06.07.04: Management of sevrals boards
-                               //i_ChannelNo=i_ChannelNo-4;
-                               //i_Offset=128;
+                               /* BEGIN JK 06.07.04: Management of sevrals boards */
+                               /* i_ChannelNo=i_ChannelNo-4; */
+                               /* i_Offset=128; */
                                s_BoardInfos[dev->minor].i_ChannelNo =
                                        s_BoardInfos[dev->minor].i_ChannelNo -
                                        4;
                                s_BoardInfos[dev->minor].i_Offset = 128;
-                               //END JK 06.07.04: Management of sevrals boards
+                               /* END JK 06.07.04: Management of sevrals boards */
                                ui_ChannelNo = ui_ChannelNo - 4;
-                       }       //if(ui_ChannelNo >=4 && ui_ChannelNo <=5)
+                       }       /* if(ui_ChannelNo >=4 && ui_ChannelNo <=5) */
                        if (ui_ChannelNo >= 6 && ui_ChannelNo <= 7) {
-                               //BEGIN JK 06.07.04: Management of sevrals boards
-                               //i_ChannelNo=i_ChannelNo-6;
-                               //i_Offset=192;
+                               /* BEGIN JK 06.07.04: Management of sevrals boards */
+                               /* i_ChannelNo=i_ChannelNo-6; */
+                               /* i_Offset=192; */
                                s_BoardInfos[dev->minor].i_ChannelNo =
                                        s_BoardInfos[dev->minor].i_ChannelNo -
                                        6;
                                s_BoardInfos[dev->minor].i_Offset = 192;
-                               //END JK 06.07.04: Management of sevrals boards
+                               /* END JK 06.07.04: Management of sevrals boards */
                                ui_ChannelNo = ui_ChannelNo - 6;
-                       }       //if(ui_ChannelNo >=6 && ui_ChannelNo <=7)
+                       }       /* if(ui_ChannelNo >=6 && ui_ChannelNo <=7) */
                        break;
 
                default:
                        printk("\n This selection of polarity does not exist\n");
                        i_err++;
-               }               //switch(data[2])
-       }                       //if(data[12]==0 || data[12]==1)
+               }               /* switch(data[2]) */
+       }                       /* if(data[12]==0 || data[12]==1) */
        else {
                switch (data[11]) {
                case 1:
-                       //BEGIN JK 06.07.04: Management of sevrals boards
-                       //i_Offset=0;
+                       /* BEGIN JK 06.07.04: Management of sevrals boards */
+                       /* i_Offset=0; */
                        s_BoardInfos[dev->minor].i_Offset = 0;
-                       //END JK 06.07.04: Management of sevrals boards
+                       /* END JK 06.07.04: Management of sevrals boards */
                        break;
                case 2:
-                       //BEGIN JK 06.07.04: Management of sevrals boards
-                       //i_Offset=64;
+                       /* BEGIN JK 06.07.04: Management of sevrals boards */
+                       /* i_Offset=64; */
                        s_BoardInfos[dev->minor].i_Offset = 64;
-                       //END JK 06.07.04: Management of sevrals boards
+                       /* END JK 06.07.04: Management of sevrals boards */
                        break;
                case 3:
-                       //BEGIN JK 06.07.04: Management of sevrals boards
-                       //i_Offset=128;
+                       /* BEGIN JK 06.07.04: Management of sevrals boards */
+                       /* i_Offset=128; */
                        s_BoardInfos[dev->minor].i_Offset = 128;
-                       //END JK 06.07.04: Management of sevrals boards
+                       /* END JK 06.07.04: Management of sevrals boards */
                        break;
                case 4:
-                       //BEGIN JK 06.07.04: Management of sevrals boards
-                       //i_Offset=192;
+                       /* BEGIN JK 06.07.04: Management of sevrals boards */
+                       /* i_Offset=192; */
                        s_BoardInfos[dev->minor].i_Offset = 192;
-                       //END JK 06.07.04: Management of sevrals boards
+                       /* END JK 06.07.04: Management of sevrals boards */
                        break;
                default:
                        printk("\nError in module selection\n");
                        i_err++;
-               }               // switch(data[11])
-       }                       // elseif(data[12]==0 || data[12]==1)
+               }               /*  switch(data[11]) */
+       }                       /*  elseif(data[12]==0 || data[12]==1) */
        if (i_err) {
                i_APCI3200_Reset(dev);
                return -EINVAL;
        }
-       //if(i_ScanType!=1)
+       /* if(i_ScanType!=1) */
        if (s_BoardInfos[dev->minor].i_ScanType != 1) {
-               //BEGIN JK 06.07.04: Management of sevrals boards
-               //i_Count=0;
-               //i_Sum=0;
+               /* BEGIN JK 06.07.04: Management of sevrals boards */
+               /* i_Count=0; */
+               /* i_Sum=0; */
                s_BoardInfos[dev->minor].i_Count = 0;
                s_BoardInfos[dev->minor].i_Sum = 0;
-               //END JK 06.07.04: Management of sevrals boards
-       }                       //if(i_ScanType!=1)
+               /* END JK 06.07.04: Management of sevrals boards */
+       }                       /* if(i_ScanType!=1) */
 
        ul_Config =
                data[1] | (data[2] << 6) | (data[5] << 7) | (data[3] << 8) |
                (data[4] << 9);
-       //BEGIN JK 06.07.04: Management of sevrals boards
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* BEGIN JK 06.07.04: Management of sevrals boards */
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
-       //END JK 06.07.04: Management of sevrals boards
+       /* END JK 06.07.04: Management of sevrals boards */
   /*********************************/
        /* Write the channel to configure */
   /*********************************/
-       //BEGIN JK 06.07.04: Management of sevrals boards
-       //outl(0 | ui_ChannelNo , devpriv->iobase+i_Offset + 0x4);
+       /* BEGIN JK 06.07.04: Management of sevrals boards */
+       /* outl(0 | ui_ChannelNo , devpriv->iobase+i_Offset + 0x4); */
        outl(0 | ui_ChannelNo,
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 0x4);
-       //END JK 06.07.04: Management of sevrals boards
+       /* END JK 06.07.04: Management of sevrals boards */
 
-       //BEGIN JK 06.07.04: Management of sevrals boards
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* BEGIN JK 06.07.04: Management of sevrals boards */
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
-       //END JK 06.07.04: Management of sevrals boards
+       /* END JK 06.07.04: Management of sevrals boards */
   /**************************/
        /* Reset the configuration */
   /**************************/
-       //BEGIN JK 06.07.04: Management of sevrals boards
-       //outl(0 , devpriv->iobase+i_Offset + 0x0);
+       /* BEGIN JK 06.07.04: Management of sevrals boards */
+       /* outl(0 , devpriv->iobase+i_Offset + 0x0); */
        outl(0, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 0x0);
-       //END JK 06.07.04: Management of sevrals boards
+       /* END JK 06.07.04: Management of sevrals boards */
 
-       //BEGIN JK 06.07.04: Management of sevrals boards
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* BEGIN JK 06.07.04: Management of sevrals boards */
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
-       //END JK 06.07.04: Management of sevrals boards
+       /* END JK 06.07.04: Management of sevrals boards */
 
   /***************************/
        /* Write the configuration */
   /***************************/
-       //BEGIN JK 06.07.04: Management of sevrals boards
-       //outl(ul_Config , devpriv->iobase+i_Offset + 0x0);
+       /* BEGIN JK 06.07.04: Management of sevrals boards */
+       /* outl(ul_Config , devpriv->iobase+i_Offset + 0x0); */
        outl(ul_Config,
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 0x0);
-       //END JK 06.07.04: Management of sevrals boards
+       /* END JK 06.07.04: Management of sevrals boards */
 
   /***************************/
        /*Reset the calibration bit */
   /***************************/
-       //BEGIN JK 06.07.04: Management of sevrals boards
-       //ul_Temp = inl(devpriv->iobase+i_Offset + 12);
+       /* BEGIN JK 06.07.04: Management of sevrals boards */
+       /* ul_Temp = inl(devpriv->iobase+i_Offset + 12); */
        ul_Temp = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
-       //END JK 06.07.04: Management of sevrals boards
+       /* END JK 06.07.04: Management of sevrals boards */
 
-       //BEGIN JK 06.07.04: Management of sevrals boards
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* BEGIN JK 06.07.04: Management of sevrals boards */
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
-       //END JK 06.07.04: Management of sevrals boards
+       /* END JK 06.07.04: Management of sevrals boards */
 
-       //BEGIN JK 06.07.04: Management of sevrals boards
-       //outl((ul_Temp & 0xFFF9FFFF) , devpriv->iobase+.i_Offset + 12);
+       /* BEGIN JK 06.07.04: Management of sevrals boards */
+       /* outl((ul_Temp & 0xFFF9FFFF) , devpriv->iobase+.i_Offset + 12); */
        outl((ul_Temp & 0xFFF9FFFF),
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
-       //END JK 06.07.04: Management of sevrals boards
+       /* END JK 06.07.04: Management of sevrals boards */
 
        if (data[9] == 1) {
                devpriv->tsk_Current = current;
-               //BEGIN JK 06.07.04: Management of sevrals boards
-               //i_InterruptFlag=1;
+               /* BEGIN JK 06.07.04: Management of sevrals boards */
+               /* i_InterruptFlag=1; */
                s_BoardInfos[dev->minor].i_InterruptFlag = 1;
-               //END JK 06.07.04: Management of sevrals boards
-       }                       // if(data[9]==1)
+               /* END JK 06.07.04: Management of sevrals boards */
+       }                       /*  if(data[9]==1) */
        else {
-               //BEGIN JK 06.07.04: Management of sevrals boards
-               //i_InterruptFlag=0;
+               /* BEGIN JK 06.07.04: Management of sevrals boards */
+               /* i_InterruptFlag=0; */
                s_BoardInfos[dev->minor].i_InterruptFlag = 0;
-               //END JK 06.07.04: Management of sevrals boards
-       }                       //else  if(data[9]==1)
+               /* END JK 06.07.04: Management of sevrals boards */
+       }                       /* else  if(data[9]==1) */
 
-       //BEGIN JK 06.07.04: Management of sevrals boards
-       //i_Initialised=1;
+       /* BEGIN JK 06.07.04: Management of sevrals boards */
+       /* i_Initialised=1; */
        s_BoardInfos[dev->minor].i_Initialised = 1;
-       //END JK 06.07.04: Management of sevrals boards
+       /* END JK 06.07.04: Management of sevrals boards */
 
-       //BEGIN JK 06.07.04: Management of sevrals boards
-       //if(i_ScanType==1)
+       /* BEGIN JK 06.07.04: Management of sevrals boards */
+       /* if(i_ScanType==1) */
        if (s_BoardInfos[dev->minor].i_ScanType == 1)
-               //END JK 06.07.04: Management of sevrals boards
+               /* END JK 06.07.04: Management of sevrals boards */
        {
-               //BEGIN JK 06.07.04: Management of sevrals boards
-               //i_Sum=i_Sum+1;
+               /* BEGIN JK 06.07.04: Management of sevrals boards */
+               /* i_Sum=i_Sum+1; */
                s_BoardInfos[dev->minor].i_Sum =
                        s_BoardInfos[dev->minor].i_Sum + 1;
-               //END JK 06.07.04: Management of sevrals boards
+               /* END JK 06.07.04: Management of sevrals boards */
 
                insn->unused[0] = 0;
                i_APCI3200_ReadAnalogInput(dev, s, insn, &ui_Dummy);
@@ -1368,14 +1368,14 @@ int i_APCI3200_ReadAnalogInput(struct comedi_device * dev, struct comedi_subdevi
        int i_ConvertCJCCalibration;
        int i = 0;
 
-       //BEGIN JK 06.07.04: Management of sevrals boards
-       //if(i_Initialised==0)
+       /* BEGIN JK 06.07.04: Management of sevrals boards */
+       /* if(i_Initialised==0) */
        if (s_BoardInfos[dev->minor].i_Initialised == 0)
-               //END JK 06.07.04: Management of sevrals boards
+               /* END JK 06.07.04: Management of sevrals boards */
        {
                i_APCI3200_Reset(dev);
                return -EINVAL;
-       }                       //if(i_Initialised==0);
+       }                       /* if(i_Initialised==0); */
 
 #ifdef PRINT_INFO
        printk("\n insn->unused[0] = %i", insn->unused[0]);
@@ -1386,14 +1386,14 @@ int i_APCI3200_ReadAnalogInput(struct comedi_device * dev, struct comedi_subdevi
 
                i_APCI3200_Read1AnalogInputChannel(dev, s, insn,
                        &ui_DummyValue);
-               //BEGIN JK 06.07.04: Management of sevrals boards
-               //ui_InterruptChannelValue[i_Count+0]=ui_DummyValue;
+               /* BEGIN JK 06.07.04: Management of sevrals boards */
+               /* ui_InterruptChannelValue[i_Count+0]=ui_DummyValue; */
                s_BoardInfos[dev->minor].
                        ui_InterruptChannelValue[s_BoardInfos[dev->minor].
                        i_Count + 0] = ui_DummyValue;
-               //END JK 06.07.04: Management of sevrals boards
+               /* END JK 06.07.04: Management of sevrals boards */
 
-               //Begin JK 25.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+               /* Begin JK 25.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
                i_APCI3200_GetChannelCalibrationValue(dev,
                        s_BoardInfos[dev->minor].ui_Channel_num,
                        &s_BoardInfos[dev->minor].
@@ -1414,62 +1414,62 @@ int i_APCI3200_ReadAnalogInput(struct comedi_device * dev, struct comedi_subdevi
                printk("\n s_BoardInfos [dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count+8] = %lu", s_BoardInfos[dev->minor].ui_InterruptChannelValue[s_BoardInfos[dev->minor].i_Count + 8]);
 #endif
 
-               //End JK 25.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+               /* End JK 25.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 
-               //BEGIN JK 06.07.04: Management of sevrals boards
-               //if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE) && (i_CJCAvailable==1))
+               /* BEGIN JK 06.07.04: Management of sevrals boards */
+               /* if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE) && (i_CJCAvailable==1)) */
                if ((s_BoardInfos[dev->minor].i_ADDIDATAType == 2)
                        && (s_BoardInfos[dev->minor].i_InterruptFlag == FALSE)
                        && (s_BoardInfos[dev->minor].i_CJCAvailable == 1))
-                       //END JK 06.07.04: Management of sevrals boards
+                       /* END JK 06.07.04: Management of sevrals boards */
                {
                        i_APCI3200_ReadCJCValue(dev, &ui_DummyValue);
-                       //BEGIN JK 06.07.04: Management of sevrals boards
-                       //ui_InterruptChannelValue[i_Count + 3]=ui_DummyValue;
+                       /* BEGIN JK 06.07.04: Management of sevrals boards */
+                       /* ui_InterruptChannelValue[i_Count + 3]=ui_DummyValue; */
                        s_BoardInfos[dev->minor].
                                ui_InterruptChannelValue[s_BoardInfos[dev->
                                        minor].i_Count + 3] = ui_DummyValue;
-                       //END JK 06.07.04: Management of sevrals boards
-               }               //if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE))
+                       /* END JK 06.07.04: Management of sevrals boards */
+               }               /* if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE)) */
                else {
-                       //BEGIN JK 06.07.04: Management of sevrals boards
-                       //ui_InterruptChannelValue[i_Count + 3]=0;
+                       /* BEGIN JK 06.07.04: Management of sevrals boards */
+                       /* ui_InterruptChannelValue[i_Count + 3]=0; */
                        s_BoardInfos[dev->minor].
                                ui_InterruptChannelValue[s_BoardInfos[dev->
                                        minor].i_Count + 3] = 0;
-                       //END JK 06.07.04: Management of sevrals boards
-               }               //elseif((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE) && (i_CJCAvailable==1))
+                       /* END JK 06.07.04: Management of sevrals boards */
+               }               /* elseif((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE) && (i_CJCAvailable==1)) */
 
-               //BEGIN JK 06.07.04: Management of sevrals boards
-               //if (( i_AutoCalibration == FALSE) && (i_InterruptFlag == FALSE))
+               /* BEGIN JK 06.07.04: Management of sevrals boards */
+               /* if (( i_AutoCalibration == FALSE) && (i_InterruptFlag == FALSE)) */
                if ((s_BoardInfos[dev->minor].i_AutoCalibration == FALSE)
                        && (s_BoardInfos[dev->minor].i_InterruptFlag == FALSE))
-                       //END JK 06.07.04: Management of sevrals boards
+                       /* END JK 06.07.04: Management of sevrals boards */
                {
                        i_APCI3200_ReadCalibrationOffsetValue(dev,
                                &ui_DummyValue);
-                       //BEGIN JK 06.07.04: Management of sevrals boards
-                       //ui_InterruptChannelValue[i_Count + 1]=ui_DummyValue;
+                       /* BEGIN JK 06.07.04: Management of sevrals boards */
+                       /* ui_InterruptChannelValue[i_Count + 1]=ui_DummyValue; */
                        s_BoardInfos[dev->minor].
                                ui_InterruptChannelValue[s_BoardInfos[dev->
                                        minor].i_Count + 1] = ui_DummyValue;
-                       //END JK 06.07.04: Management of sevrals boards
+                       /* END JK 06.07.04: Management of sevrals boards */
                        i_APCI3200_ReadCalibrationGainValue(dev,
                                &ui_DummyValue);
-                       //BEGIN JK 06.07.04: Management of sevrals boards
-                       //ui_InterruptChannelValue[i_Count + 2]=ui_DummyValue;
+                       /* BEGIN JK 06.07.04: Management of sevrals boards */
+                       /* ui_InterruptChannelValue[i_Count + 2]=ui_DummyValue; */
                        s_BoardInfos[dev->minor].
                                ui_InterruptChannelValue[s_BoardInfos[dev->
                                        minor].i_Count + 2] = ui_DummyValue;
-                       //END JK 06.07.04: Management of sevrals boards
-               }               //if (( i_AutoCalibration == FALSE) && (i_InterruptFlag == FALSE))
+                       /* END JK 06.07.04: Management of sevrals boards */
+               }               /* if (( i_AutoCalibration == FALSE) && (i_InterruptFlag == FALSE)) */
 
-               //BEGIN JK 06.07.04: Management of sevrals boards
-               //if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE)&& (i_CJCAvailable==1))
+               /* BEGIN JK 06.07.04: Management of sevrals boards */
+               /* if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE)&& (i_CJCAvailable==1)) */
                if ((s_BoardInfos[dev->minor].i_ADDIDATAType == 2)
                        && (s_BoardInfos[dev->minor].i_InterruptFlag == FALSE)
                        && (s_BoardInfos[dev->minor].i_CJCAvailable == 1))
-                       //END JK 06.07.04: Management of sevrals boards
+                       /* END JK 06.07.04: Management of sevrals boards */
                {
          /**********************************************************/
                        /*Test if the Calibration channel must be read for the CJC */
@@ -1477,52 +1477,52 @@ int i_APCI3200_ReadAnalogInput(struct comedi_device * dev, struct comedi_subdevi
          /**********************************/
                        /*Test if the polarity is the same */
          /**********************************/
-                       //BEGIN JK 06.07.04: Management of sevrals boards
-                       //if(i_CJCPolarity!=i_ADDIDATAPolarity)
+                       /* BEGIN JK 06.07.04: Management of sevrals boards */
+                       /* if(i_CJCPolarity!=i_ADDIDATAPolarity) */
                        if (s_BoardInfos[dev->minor].i_CJCPolarity !=
                                s_BoardInfos[dev->minor].i_ADDIDATAPolarity)
-                               //END JK 06.07.04: Management of sevrals boards
+                               /* END JK 06.07.04: Management of sevrals boards */
                        {
                                i_ConvertCJCCalibration = 1;
-                       }       //if(i_CJCPolarity!=i_ADDIDATAPolarity)
+                       }       /* if(i_CJCPolarity!=i_ADDIDATAPolarity) */
                        else {
-                               //BEGIN JK 06.07.04: Management of sevrals boards
-                               //if(i_CJCGain==i_ADDIDATAGain)
+                               /* BEGIN JK 06.07.04: Management of sevrals boards */
+                               /* if(i_CJCGain==i_ADDIDATAGain) */
                                if (s_BoardInfos[dev->minor].i_CJCGain ==
                                        s_BoardInfos[dev->minor].i_ADDIDATAGain)
-                                       //END JK 06.07.04: Management of sevrals boards
+                                       /* END JK 06.07.04: Management of sevrals boards */
                                {
                                        i_ConvertCJCCalibration = 0;
-                               }       //if(i_CJCGain==i_ADDIDATAGain)
+                               }       /* if(i_CJCGain==i_ADDIDATAGain) */
                                else {
                                        i_ConvertCJCCalibration = 1;
-                               }       //elseif(i_CJCGain==i_ADDIDATAGain)
-                       }       //elseif(i_CJCPolarity!=i_ADDIDATAPolarity)
+                               }       /* elseif(i_CJCGain==i_ADDIDATAGain) */
+                       }       /* elseif(i_CJCPolarity!=i_ADDIDATAPolarity) */
                        if (i_ConvertCJCCalibration == 1) {
                                i_APCI3200_ReadCJCCalOffset(dev,
                                        &ui_DummyValue);
-                               //BEGIN JK 06.07.04: Management of sevrals boards
-                               //ui_InterruptChannelValue[i_Count+4]=ui_DummyValue;
+                               /* BEGIN JK 06.07.04: Management of sevrals boards */
+                               /* ui_InterruptChannelValue[i_Count+4]=ui_DummyValue; */
                                s_BoardInfos[dev->minor].
                                        ui_InterruptChannelValue[s_BoardInfos
                                        [dev->minor].i_Count + 4] =
                                        ui_DummyValue;
-                               //END JK 06.07.04: Management of sevrals boards
+                               /* END JK 06.07.04: Management of sevrals boards */
 
                                i_APCI3200_ReadCJCCalGain(dev, &ui_DummyValue);
 
-                               //BEGIN JK 06.07.04: Management of sevrals boards
-                               //ui_InterruptChannelValue[i_Count+5]=ui_DummyValue;
+                               /* BEGIN JK 06.07.04: Management of sevrals boards */
+                               /* ui_InterruptChannelValue[i_Count+5]=ui_DummyValue; */
                                s_BoardInfos[dev->minor].
                                        ui_InterruptChannelValue[s_BoardInfos
                                        [dev->minor].i_Count + 5] =
                                        ui_DummyValue;
-                               //END JK 06.07.04: Management of sevrals boards
-                       }       //if(i_ConvertCJCCalibration==1)
+                               /* END JK 06.07.04: Management of sevrals boards */
+                       }       /* if(i_ConvertCJCCalibration==1) */
                        else {
-                               //BEGIN JK 06.07.04: Management of sevrals boards
-                               //ui_InterruptChannelValue[i_Count+4]=0;
-                               //ui_InterruptChannelValue[i_Count+5]=0;
+                               /* BEGIN JK 06.07.04: Management of sevrals boards */
+                               /* ui_InterruptChannelValue[i_Count+4]=0; */
+                               /* ui_InterruptChannelValue[i_Count+5]=0; */
 
                                s_BoardInfos[dev->minor].
                                        ui_InterruptChannelValue[s_BoardInfos
@@ -1530,36 +1530,36 @@ int i_APCI3200_ReadAnalogInput(struct comedi_device * dev, struct comedi_subdevi
                                s_BoardInfos[dev->minor].
                                        ui_InterruptChannelValue[s_BoardInfos
                                        [dev->minor].i_Count + 5] = 0;
-                               //END JK 06.07.04: Management of sevrals boards
-                       }       //elseif(i_ConvertCJCCalibration==1)
-               }               //if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE))
+                               /* END JK 06.07.04: Management of sevrals boards */
+                       }       /* elseif(i_ConvertCJCCalibration==1) */
+               }               /* if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE)) */
 
-               //BEGIN JK 06.07.04: Management of sevrals boards
-               //if(i_ScanType!=1)
+               /* BEGIN JK 06.07.04: Management of sevrals boards */
+               /* if(i_ScanType!=1) */
                if (s_BoardInfos[dev->minor].i_ScanType != 1) {
-                       //i_Count=0;
+                       /* i_Count=0; */
                        s_BoardInfos[dev->minor].i_Count = 0;
-               }               //if(i_ScanType!=1)
+               }               /* if(i_ScanType!=1) */
                else {
-                       //i_Count=i_Count +6;
-                       //Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
-                       //s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count +6;
+                       /* i_Count=i_Count +6; */
+                       /* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
+                       /* s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count +6; */
                        s_BoardInfos[dev->minor].i_Count =
                                s_BoardInfos[dev->minor].i_Count + 9;
-                       //End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
-               }               //else if(i_ScanType!=1)
+                       /* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
+               }               /* else if(i_ScanType!=1) */
 
-               //if((i_ScanType==1) &&(i_InterruptFlag==1))
+               /* if((i_ScanType==1) &&(i_InterruptFlag==1)) */
                if ((s_BoardInfos[dev->minor].i_ScanType == 1)
                        && (s_BoardInfos[dev->minor].i_InterruptFlag == 1)) {
-                       //i_Count=i_Count-6;
-                       //Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
-                       //s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count-6;
+                       /* i_Count=i_Count-6; */
+                       /* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
+                       /* s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count-6; */
                        s_BoardInfos[dev->minor].i_Count =
                                s_BoardInfos[dev->minor].i_Count - 9;
-                       //End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+                       /* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
                }
-               //if(i_ScanType==0)
+               /* if(i_ScanType==0) */
                if (s_BoardInfos[dev->minor].i_ScanType == 0) {
                        /*
                           data[0]= ui_InterruptChannelValue[0];
@@ -1591,41 +1591,41 @@ int i_APCI3200_ReadAnalogInput(struct comedi_device * dev, struct comedi_subdevi
                                s_BoardInfos[dev->minor].
                                ui_InterruptChannelValue[5];
 
-                       //Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
-                       //printk("\n 0 - i_APCI3200_GetChannelCalibrationValue data [6] = %lu, data [7] = %lu, data [8] = %lu", data [6], data [7], data [8]);
+                       /* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
+                       /* printk("\n 0 - i_APCI3200_GetChannelCalibrationValue data [6] = %lu, data [7] = %lu, data [8] = %lu", data [6], data [7], data [8]); */
                        i_APCI3200_GetChannelCalibrationValue(dev,
                                s_BoardInfos[dev->minor].ui_Channel_num,
                                &data[6], &data[7], &data[8]);
-                       //End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+                       /* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
                }
                break;
        case 1:
 
                for (i = 0; i < insn->n; i++) {
-                       //data[i]=ui_InterruptChannelValue[i];
+                       /* data[i]=ui_InterruptChannelValue[i]; */
                        data[i] =
                                s_BoardInfos[dev->minor].
                                ui_InterruptChannelValue[i];
                }
 
-               //i_Count=0;
-               //i_Sum=0;
-               //if(i_ScanType==1)
+               /* i_Count=0; */
+               /* i_Sum=0; */
+               /* if(i_ScanType==1) */
                s_BoardInfos[dev->minor].i_Count = 0;
                s_BoardInfos[dev->minor].i_Sum = 0;
                if (s_BoardInfos[dev->minor].i_ScanType == 1) {
-                       //i_Initialised=0;
-                       //i_InterruptFlag=0;
+                       /* i_Initialised=0; */
+                       /* i_InterruptFlag=0; */
                        s_BoardInfos[dev->minor].i_Initialised = 0;
                        s_BoardInfos[dev->minor].i_InterruptFlag = 0;
-                       //END JK 06.07.04: Management of sevrals boards
+                       /* END JK 06.07.04: Management of sevrals boards */
                }
                break;
        default:
                printk("\nThe parameters passed are in error\n");
                i_APCI3200_Reset(dev);
                return -EINVAL;
-       }                       //switch(insn->unused[0])
+       }                       /* switch(insn->unused[0]) */
 
        return insn->n;
 }
@@ -1658,42 +1658,42 @@ int i_APCI3200_Read1AnalogInputChannel(struct comedi_device * dev,
        unsigned int ui_ChannelNo = 0;
        unsigned int ui_CommandRegister = 0;
 
-       //BEGIN JK 06.07.04: Management of sevrals boards
-       //ui_ChannelNo=i_ChannelNo;
+       /* BEGIN JK 06.07.04: Management of sevrals boards */
+       /* ui_ChannelNo=i_ChannelNo; */
        ui_ChannelNo = s_BoardInfos[dev->minor].i_ChannelNo;
 
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
   /*********************************/
        /* Write the channel to configure */
   /*********************************/
-       //Begin JK 20.10.2004: Bad channel value is used when using differential mode
-       //outl(0 | ui_Channel_num , devpriv->iobase+i_Offset + 0x4);
-       //outl(0 | s_BoardInfos [dev->minor].ui_Channel_num , devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 0x4);
+       /* Begin JK 20.10.2004: Bad channel value is used when using differential mode */
+       /* outl(0 | ui_Channel_num , devpriv->iobase+i_Offset + 0x4); */
+       /* outl(0 | s_BoardInfos [dev->minor].ui_Channel_num , devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 0x4); */
        outl(0 | s_BoardInfos[dev->minor].i_ChannelNo,
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 0x4);
-       //End JK 20.10.2004: Bad channel value is used when using differential mode
+       /* End JK 20.10.2004: Bad channel value is used when using differential mode */
 
   /*******************************/
        /* Set the convert timing unit */
   /*******************************/
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
 
-       //outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36);
+       /* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */
        outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit,
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36);
 
   /**************************/
        /* Set the convert timing */
   /**************************/
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
 
-       //outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32);
+       /* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */
        outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime,
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32);
 
@@ -1707,36 +1707,36 @@ int i_APCI3200_Read1AnalogInputChannel(struct comedi_device * dev,
        /*Test if the interrupt is enable */
   /*********************************/
 
-       //if (i_InterruptFlag == ADDIDATA_ENABLE)
+       /* if (i_InterruptFlag == ADDIDATA_ENABLE) */
        if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) {
       /************************/
                /* Enable the interrupt */
       /************************/
                ui_CommandRegister = ui_CommandRegister | 0x00100000;
-       }                       //if (i_InterruptFlag == ADDIDATA_ENABLE)
+       }                       /* if (i_InterruptFlag == ADDIDATA_ENABLE) */
 
   /******************************/
        /* Write the command register */
   /******************************/
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
 
-       //outl(ui_CommandRegister, devpriv->iobase+i_Offset + 8);
+       /* outl(ui_CommandRegister, devpriv->iobase+i_Offset + 8); */
        outl(ui_CommandRegister,
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
 
   /*****************************/
        /*Test if interrupt is enable */
   /*****************************/
-       //if (i_InterruptFlag == ADDIDATA_DISABLE)
+       /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
        if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) {
                do {
          /*************************/
                        /*Read the EOC Status bit */
          /*************************/
 
-                       //ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1;
+                       /* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */
                        ui_EOC = inl(devpriv->iobase +
                                s_BoardInfos[dev->minor].i_Offset + 20) & 1;
 
@@ -1746,13 +1746,13 @@ int i_APCI3200_Read1AnalogInputChannel(struct comedi_device * dev,
                /* Read the digital value of the input */
       /***************************************/
 
-               //data[0] = inl (devpriv->iobase+i_Offset + 28);
+               /* data[0] = inl (devpriv->iobase+i_Offset + 28); */
                data[0] =
                        inl(devpriv->iobase +
                        s_BoardInfos[dev->minor].i_Offset + 28);
-               //END JK 06.07.04: Management of sevrals boards
+               /* END JK 06.07.04: Management of sevrals boards */
 
-       }                       // if (i_InterruptFlag == ADDIDATA_DISABLE)
+       }                       /*  if (i_InterruptFlag == ADDIDATA_DISABLE) */
        return 0;
 }
 
@@ -1781,49 +1781,49 @@ int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device * dev, unsigned i
        unsigned int ui_Temp = 0, ui_EOC = 0;
        unsigned int ui_CommandRegister = 0;
 
-       //BEGIN JK 06.07.04: Management of sevrals boards
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* BEGIN JK 06.07.04: Management of sevrals boards */
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
   /*********************************/
        /* Write the channel to configure */
   /*********************************/
-       //Begin JK 20.10.2004: This seems not necessary !
-       //outl(0 | ui_Channel_num , devpriv->iobase+i_Offset + 0x4);
-       //outl(0 | s_BoardInfos [dev->minor].ui_Channel_num , devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 0x4);
-       //End JK 20.10.2004: This seems not necessary !
+       /* Begin JK 20.10.2004: This seems not necessary ! */
+       /* outl(0 | ui_Channel_num , devpriv->iobase+i_Offset + 0x4); */
+       /* outl(0 | s_BoardInfos [dev->minor].ui_Channel_num , devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 0x4); */
+       /* End JK 20.10.2004: This seems not necessary ! */
 
   /*******************************/
        /* Set the convert timing unit */
   /*******************************/
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
-       //outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36);
+       /* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */
        outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit,
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36);
   /**************************/
        /* Set the convert timing */
   /**************************/
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
-       //outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32);
+       /* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */
        outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime,
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32);
   /*****************************/
        /*Read the calibration offset */
   /*****************************/
-       //ui_Temp = inl(devpriv->iobase+i_Offset + 12);
+       /* ui_Temp = inl(devpriv->iobase+i_Offset + 12); */
        ui_Temp = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
 
   /*********************************/
        /*Configure the Offset Conversion */
   /*********************************/
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
-       //outl((ui_Temp | 0x00020000), devpriv->iobase+i_Offset + 12);
+       /* outl((ui_Temp | 0x00020000), devpriv->iobase+i_Offset + 12); */
        outl((ui_Temp | 0x00020000),
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
   /*******************************/
@@ -1836,7 +1836,7 @@ int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device * dev, unsigned i
        /*Test if the interrupt is enable */
   /*********************************/
 
-       //if (i_InterruptFlag == ADDIDATA_ENABLE)
+       /* if (i_InterruptFlag == ADDIDATA_ENABLE) */
        if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) {
 
       /**********************/
@@ -1845,7 +1845,7 @@ int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device * dev, unsigned i
 
                ui_CommandRegister = ui_CommandRegister | 0x00100000;
 
-       }                       //if (i_InterruptFlag == ADDIDATA_ENABLE)
+       }                       /* if (i_InterruptFlag == ADDIDATA_ENABLE) */
 
   /**********************/
        /*Start the conversion */
@@ -1855,10 +1855,10 @@ int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device * dev, unsigned i
   /***************************/
        /*Write the command regiter */
   /***************************/
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
-       //outl(ui_CommandRegister, devpriv->iobase+i_Offset + 8);
+       /* outl(ui_CommandRegister, devpriv->iobase+i_Offset + 8); */
        outl(ui_CommandRegister,
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
 
@@ -1866,7 +1866,7 @@ int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device * dev, unsigned i
        /*Test if interrupt is enable */
   /*****************************/
 
-       //if (i_InterruptFlag == ADDIDATA_DISABLE)
+       /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
        if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) {
 
                do {
@@ -1874,7 +1874,7 @@ int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device * dev, unsigned i
                        /*Read the EOC flag */
          /*******************/
 
-                       //ui_EOC = inl (devpriv->iobase+i_Offset + 20) & 1;
+                       /* ui_EOC = inl (devpriv->iobase+i_Offset + 20) & 1; */
                        ui_EOC = inl(devpriv->iobase +
                                s_BoardInfos[dev->minor].i_Offset + 20) & 1;
 
@@ -1884,11 +1884,11 @@ int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device * dev, unsigned i
                /*Read the digital value of the calibration Offset */
       /**************************************************/
 
-               //data[0] = inl(devpriv->iobase+i_Offset+ 28);
+               /* data[0] = inl(devpriv->iobase+i_Offset+ 28); */
                data[0] =
                        inl(devpriv->iobase +
                        s_BoardInfos[dev->minor].i_Offset + 28);
-       }                       //if (i_InterruptFlag == ADDIDATA_DISABLE)
+       }                       /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
        return 0;
 }
 
@@ -1917,16 +1917,16 @@ int i_APCI3200_ReadCalibrationGainValue(struct comedi_device * dev, unsigned int
        unsigned int ui_EOC = 0;
        int ui_CommandRegister = 0;
 
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
   /*********************************/
        /* Write the channel to configure */
   /*********************************/
-       //Begin JK 20.10.2004: This seems not necessary !
-       //outl(0 | ui_Channel_num , devpriv->iobase+i_Offset + 0x4);
-       //outl(0 | s_BoardInfos [dev->minor].ui_Channel_num , devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 0x4);
-       //End JK 20.10.2004: This seems not necessary !
+       /* Begin JK 20.10.2004: This seems not necessary ! */
+       /* outl(0 | ui_Channel_num , devpriv->iobase+i_Offset + 0x4); */
+       /* outl(0 | s_BoardInfos [dev->minor].ui_Channel_num , devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 0x4); */
+       /* End JK 20.10.2004: This seems not necessary ! */
 
   /***************************/
        /*Read the calibration gain */
@@ -1934,28 +1934,28 @@ int i_APCI3200_ReadCalibrationGainValue(struct comedi_device * dev, unsigned int
   /*******************************/
        /* Set the convert timing unit */
   /*******************************/
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
-       //outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36);
+       /* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */
        outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit,
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36);
   /**************************/
        /* Set the convert timing */
   /**************************/
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
-       //outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32);
+       /* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */
        outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime,
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32);
   /*******************************/
        /*Configure the Gain Conversion */
   /*******************************/
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
-       //outl(0x00040000 , devpriv->iobase+i_Offset + 12);
+       /* outl(0x00040000 , devpriv->iobase+i_Offset + 12); */
        outl(0x00040000,
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
 
@@ -1969,7 +1969,7 @@ int i_APCI3200_ReadCalibrationGainValue(struct comedi_device * dev, unsigned int
        /*Test if the interrupt is enable */
   /*********************************/
 
-       //if (i_InterruptFlag == ADDIDATA_ENABLE)
+       /* if (i_InterruptFlag == ADDIDATA_ENABLE) */
        if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) {
 
       /**********************/
@@ -1978,7 +1978,7 @@ int i_APCI3200_ReadCalibrationGainValue(struct comedi_device * dev, unsigned int
 
                ui_CommandRegister = ui_CommandRegister | 0x00100000;
 
-       }                       //if (i_InterruptFlag == ADDIDATA_ENABLE)
+       }                       /* if (i_InterruptFlag == ADDIDATA_ENABLE) */
 
   /**********************/
        /*Start the conversion */
@@ -1988,10 +1988,10 @@ int i_APCI3200_ReadCalibrationGainValue(struct comedi_device * dev, unsigned int
   /***************************/
        /*Write the command regiter */
   /***************************/
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
-       //outl(ui_CommandRegister , devpriv->iobase+i_Offset + 8);
+       /* outl(ui_CommandRegister , devpriv->iobase+i_Offset + 8); */
        outl(ui_CommandRegister,
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
 
@@ -1999,7 +1999,7 @@ int i_APCI3200_ReadCalibrationGainValue(struct comedi_device * dev, unsigned int
        /*Test if interrupt is enable */
   /*****************************/
 
-       //if (i_InterruptFlag == ADDIDATA_DISABLE)
+       /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
        if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) {
 
                do {
@@ -2008,7 +2008,7 @@ int i_APCI3200_ReadCalibrationGainValue(struct comedi_device * dev, unsigned int
                        /*Read the EOC flag */
          /*******************/
 
-                       //ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1;
+                       /* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */
                        ui_EOC = inl(devpriv->iobase +
                                s_BoardInfos[dev->minor].i_Offset + 20) & 1;
 
@@ -2018,12 +2018,12 @@ int i_APCI3200_ReadCalibrationGainValue(struct comedi_device * dev, unsigned int
                /*Read the digital value of the calibration Gain */
       /************************************************/
 
-               //data[0] = inl(devpriv->iobase+i_Offset + 28);
+               /* data[0] = inl(devpriv->iobase+i_Offset + 28); */
                data[0] =
                        inl(devpriv->iobase +
                        s_BoardInfos[dev->minor].i_Offset + 28);
 
-       }                       //if (i_InterruptFlag == ADDIDATA_DISABLE)
+       }                       /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
        return 0;
 }
 
@@ -2057,32 +2057,32 @@ int i_APCI3200_ReadCJCValue(struct comedi_device * dev, unsigned int * data)
        /*Set the converting time unit */
   /******************************/
 
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
 
-       //outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36);
+       /* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */
        outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit,
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36);
   /**************************/
        /* Set the convert timing */
   /**************************/
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
 
-       //outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32);
+       /* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */
        outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime,
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32);
 
   /******************************/
        /*Configure the CJC Conversion */
   /******************************/
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
 
-       //outl( 0x00000400 , devpriv->iobase+i_Offset + 4);
+       /* outl( 0x00000400 , devpriv->iobase+i_Offset + 4); */
        outl(0x00000400,
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4);
   /*******************************/
@@ -2092,7 +2092,7 @@ int i_APCI3200_ReadCJCValue(struct comedi_device * dev, unsigned int * data)
   /*********************************/
        /*Test if the interrupt is enable */
   /*********************************/
-       //if (i_InterruptFlag == ADDIDATA_ENABLE)
+       /* if (i_InterruptFlag == ADDIDATA_ENABLE) */
        if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) {
       /**********************/
                /*Enable the interrupt */
@@ -2109,10 +2109,10 @@ int i_APCI3200_ReadCJCValue(struct comedi_device * dev, unsigned int * data)
   /***************************/
        /*Write the command regiter */
   /***************************/
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
-       //outl(ui_CommandRegister , devpriv->iobase+i_Offset + 8);
+       /* outl(ui_CommandRegister , devpriv->iobase+i_Offset + 8); */
        outl(ui_CommandRegister,
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
 
@@ -2120,7 +2120,7 @@ int i_APCI3200_ReadCJCValue(struct comedi_device * dev, unsigned int * data)
        /*Test if interrupt is enable */
   /*****************************/
 
-       //if (i_InterruptFlag == ADDIDATA_DISABLE)
+       /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
        if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) {
                do {
 
@@ -2128,7 +2128,7 @@ int i_APCI3200_ReadCJCValue(struct comedi_device * dev, unsigned int * data)
                        /*Read the EOC flag */
          /*******************/
 
-                       //ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1;
+                       /* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */
                        ui_EOC = inl(devpriv->iobase +
                                s_BoardInfos[dev->minor].i_Offset + 20) & 1;
 
@@ -2138,12 +2138,12 @@ int i_APCI3200_ReadCJCValue(struct comedi_device * dev, unsigned int * data)
                /*Read the digital value of the CJC */
       /***********************************/
 
-               //data[0] = inl(devpriv->iobase+i_Offset + 28);
+               /* data[0] = inl(devpriv->iobase+i_Offset + 28); */
                data[0] =
                        inl(devpriv->iobase +
                        s_BoardInfos[dev->minor].i_Offset + 28);
 
-       }                       //if (i_InterruptFlag == ADDIDATA_DISABLE)
+       }                       /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
        return 0;
 }
 
@@ -2177,37 +2177,37 @@ int i_APCI3200_ReadCJCCalOffset(struct comedi_device * dev, unsigned int * data)
   /*******************************/
        /* Set the convert timing unit */
   /*******************************/
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
-       //outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36);
+       /* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */
        outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit,
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36);
   /**************************/
        /* Set the convert timing */
   /**************************/
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
-       //outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32);
+       /* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */
        outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime,
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32);
   /******************************/
        /*Configure the CJC Conversion */
   /******************************/
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
-       //outl(0x00000400 , devpriv->iobase+i_Offset + 4);
+       /* outl(0x00000400 , devpriv->iobase+i_Offset + 4); */
        outl(0x00000400,
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4);
   /*********************************/
        /*Configure the Offset Conversion */
   /*********************************/
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
-       //outl(0x00020000, devpriv->iobase+i_Offset + 12);
+       /* outl(0x00020000, devpriv->iobase+i_Offset + 12); */
        outl(0x00020000,
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
   /*******************************/
@@ -2218,7 +2218,7 @@ int i_APCI3200_ReadCJCCalOffset(struct comedi_device * dev, unsigned int * data)
        /*Test if the interrupt is enable */
   /*********************************/
 
-       //if (i_InterruptFlag == ADDIDATA_ENABLE)
+       /* if (i_InterruptFlag == ADDIDATA_ENABLE) */
        if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) {
       /**********************/
                /*Enable the interrupt */
@@ -2234,19 +2234,19 @@ int i_APCI3200_ReadCJCCalOffset(struct comedi_device * dev, unsigned int * data)
   /***************************/
        /*Write the command regiter */
   /***************************/
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
-       //outl(ui_CommandRegister,devpriv->iobase+i_Offset + 8);
+       /* outl(ui_CommandRegister,devpriv->iobase+i_Offset + 8); */
        outl(ui_CommandRegister,
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
-       //if (i_InterruptFlag == ADDIDATA_DISABLE)
+       /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
        if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) {
                do {
          /*******************/
                        /*Read the EOC flag */
          /*******************/
-                       //ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1;
+                       /* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */
                        ui_EOC = inl(devpriv->iobase +
                                s_BoardInfos[dev->minor].i_Offset + 20) & 1;
                } while (ui_EOC != 1);
@@ -2254,11 +2254,11 @@ int i_APCI3200_ReadCJCCalOffset(struct comedi_device * dev, unsigned int * data)
       /**************************************************/
                /*Read the digital value of the calibration Offset */
       /**************************************************/
-               //data[0] = inl(devpriv->iobase+i_Offset + 28);
+               /* data[0] = inl(devpriv->iobase+i_Offset + 28); */
                data[0] =
                        inl(devpriv->iobase +
                        s_BoardInfos[dev->minor].i_Offset + 28);
-       }                       //if (i_InterruptFlag == ADDIDATA_DISABLE)
+       }                       /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
        return 0;
 }
 
@@ -2290,37 +2290,37 @@ int i_APCI3200_ReadCJCCalGain(struct comedi_device * dev, unsigned int * data)
   /*******************************/
        /* Set the convert timing unit */
   /*******************************/
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
-       //outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36);
+       /* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */
        outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit,
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36);
   /**************************/
        /* Set the convert timing */
   /**************************/
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
-       //outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32);
+       /* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */
        outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime,
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32);
   /******************************/
        /*Configure the CJC Conversion */
   /******************************/
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
-       //outl(0x00000400,devpriv->iobase+i_Offset + 4);
+       /* outl(0x00000400,devpriv->iobase+i_Offset + 4); */
        outl(0x00000400,
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4);
   /*******************************/
        /*Configure the Gain Conversion */
   /*******************************/
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
-       //outl(0x00040000,devpriv->iobase+i_Offset + 12);
+       /* outl(0x00040000,devpriv->iobase+i_Offset + 12); */
        outl(0x00040000,
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
 
@@ -2331,7 +2331,7 @@ int i_APCI3200_ReadCJCCalGain(struct comedi_device * dev, unsigned int * data)
   /*********************************/
        /*Test if the interrupt is enable */
   /*********************************/
-       //if (i_InterruptFlag == ADDIDATA_ENABLE)
+       /* if (i_InterruptFlag == ADDIDATA_ENABLE) */
        if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) {
       /**********************/
                /*Enable the interrupt */
@@ -2345,30 +2345,30 @@ int i_APCI3200_ReadCJCCalGain(struct comedi_device * dev, unsigned int * data)
   /***************************/
        /*Write the command regiter */
   /***************************/
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
-       //outl(ui_CommandRegister ,devpriv->iobase+i_Offset + 8);
+       /* outl(ui_CommandRegister ,devpriv->iobase+i_Offset + 8); */
        outl(ui_CommandRegister,
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
-       //if (i_InterruptFlag == ADDIDATA_DISABLE)
+       /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
        if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) {
                do {
          /*******************/
                        /*Read the EOC flag */
          /*******************/
-                       //ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1;
+                       /* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */
                        ui_EOC = inl(devpriv->iobase +
                                s_BoardInfos[dev->minor].i_Offset + 20) & 1;
                } while (ui_EOC != 1);
       /************************************************/
                /*Read the digital value of the calibration Gain */
       /************************************************/
-               //data[0] = inl (devpriv->iobase+i_Offset + 28);
+               /* data[0] = inl (devpriv->iobase+i_Offset + 28); */
                data[0] =
                        inl(devpriv->iobase +
                        s_BoardInfos[dev->minor].i_Offset + 28);
-       }                       //if (i_InterruptFlag == ADDIDATA_DISABLE)
+       }                       /* if (i_InterruptFlag == ADDIDATA_DISABLE) */
        return 0;
 }
 
@@ -2408,29 +2408,29 @@ int i_APCI3200_InsnBits_AnalogInput_Test(struct comedi_device * dev,
        struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
 {
        unsigned int ui_Configuration = 0;
-       int i_Temp;             //,i_TimeUnit;
-       //if(i_Initialised==0)
+       int i_Temp;             /* ,i_TimeUnit; */
+       /* if(i_Initialised==0) */
 
        if (s_BoardInfos[dev->minor].i_Initialised == 0) {
                i_APCI3200_Reset(dev);
                return -EINVAL;
-       }                       //if(i_Initialised==0);
+       }                       /* if(i_Initialised==0); */
        if (data[0] != 0 && data[0] != 1) {
                printk("\nError in selection of functionality\n");
                i_APCI3200_Reset(dev);
                return -EINVAL;
-       }                       //if(data[0]!=0 && data[0]!=1)
+       }                       /* if(data[0]!=0 && data[0]!=1) */
 
-       if (data[0] == 1)       //Perform Short Circuit TEST
+       if (data[0] == 1)       /* Perform Short Circuit TEST */
        {
       /**************************/
                /*Set the short-cicuit bit */
       /**************************/
-               //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+               /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
                while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].
                                                i_Offset + 12) >> 19) & 1) !=
                        1) ;
-               //outl((0x00001000 |i_ChannelNo) , devpriv->iobase+i_Offset + 4);
+               /* outl((0x00001000 |i_ChannelNo) , devpriv->iobase+i_Offset + 4); */
                outl((0x00001000 | s_BoardInfos[dev->minor].i_ChannelNo),
                        devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                        4);
@@ -2439,19 +2439,19 @@ int i_APCI3200_InsnBits_AnalogInput_Test(struct comedi_device * dev,
       /*************************/
                /* i_TimeUnit= i_ADDIDATAConversionTimeUnit;
                   i_ADDIDATAConversionTimeUnit= 1; */
-               //i_Temp= i_InterruptFlag ;
+               /* i_Temp= i_InterruptFlag ; */
                i_Temp = s_BoardInfos[dev->minor].i_InterruptFlag;
-               //i_InterruptFlag = ADDIDATA_DISABLE;
+               /* i_InterruptFlag = ADDIDATA_DISABLE; */
                s_BoardInfos[dev->minor].i_InterruptFlag = ADDIDATA_DISABLE;
                i_APCI3200_Read1AnalogInputChannel(dev, s, insn, data);
-               //if(i_AutoCalibration == FALSE)
+               /* if(i_AutoCalibration == FALSE) */
                if (s_BoardInfos[dev->minor].i_AutoCalibration == FALSE) {
-                       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+                       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
                        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].
                                                        i_Offset +
                                                        12) >> 19) & 1) != 1) ;
 
-                       //outl((0x00001000 |i_ChannelNo) , devpriv->iobase+i_Offset + 4);
+                       /* outl((0x00001000 |i_ChannelNo) , devpriv->iobase+i_Offset + 4); */
                        outl((0x00001000 | s_BoardInfos[dev->minor].
                                        i_ChannelNo),
                                devpriv->iobase +
@@ -2462,15 +2462,15 @@ int i_APCI3200_InsnBits_AnalogInput_Test(struct comedi_device * dev,
                        i_APCI3200_ReadCalibrationGainValue(dev, data);
                }
        } else {
-               //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+               /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
                while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].
                                                i_Offset + 12) >> 19) & 1) !=
                        1) ;
-               //outl((0x00000800|i_ChannelNo) , devpriv->iobase+i_Offset + 4);
+               /* outl((0x00000800|i_ChannelNo) , devpriv->iobase+i_Offset + 4); */
                outl((0x00000800 | s_BoardInfos[dev->minor].i_ChannelNo),
                        devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                        4);
-               //ui_Configuration = inl(devpriv->iobase+i_Offset + 0);
+               /* ui_Configuration = inl(devpriv->iobase+i_Offset + 0); */
                ui_Configuration =
                        inl(devpriv->iobase +
                        s_BoardInfos[dev->minor].i_Offset + 0);
@@ -2479,18 +2479,18 @@ int i_APCI3200_InsnBits_AnalogInput_Test(struct comedi_device * dev,
       /*************************/
                /* i_TimeUnit= i_ADDIDATAConversionTimeUnit;
                   i_ADDIDATAConversionTimeUnit= 1; */
-               //i_Temp= i_InterruptFlag ;
+               /* i_Temp= i_InterruptFlag ; */
                i_Temp = s_BoardInfos[dev->minor].i_InterruptFlag;
-               //i_InterruptFlag = ADDIDATA_DISABLE;
+               /* i_InterruptFlag = ADDIDATA_DISABLE; */
                s_BoardInfos[dev->minor].i_InterruptFlag = ADDIDATA_DISABLE;
                i_APCI3200_Read1AnalogInputChannel(dev, s, insn, data);
-               //if(i_AutoCalibration == FALSE)
+               /* if(i_AutoCalibration == FALSE) */
                if (s_BoardInfos[dev->minor].i_AutoCalibration == FALSE) {
-                       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+                       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
                        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].
                                                        i_Offset +
                                                        12) >> 19) & 1) != 1) ;
-                       //outl((0x00000800|i_ChannelNo) , devpriv->iobase+i_Offset + 4);
+                       /* outl((0x00000800|i_ChannelNo) , devpriv->iobase+i_Offset + 4); */
                        outl((0x00000800 | s_BoardInfos[dev->minor].
                                        i_ChannelNo),
                                devpriv->iobase +
@@ -2501,9 +2501,9 @@ int i_APCI3200_InsnBits_AnalogInput_Test(struct comedi_device * dev,
                        i_APCI3200_ReadCalibrationGainValue(dev, data);
                }
        }
-       //i_InterruptFlag=i_Temp ;
+       /* i_InterruptFlag=i_Temp ; */
        s_BoardInfos[dev->minor].i_InterruptFlag = i_Temp;
-       //printk("\ni_InterruptFlag=%d\n",i_InterruptFlag);
+       /* printk("\ni_InterruptFlag=%d\n",i_InterruptFlag); */
        return insn->n;
 }
 
@@ -2565,7 +2565,7 @@ int i_APCI3200_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_
 {
 
        int err = 0;
-       int tmp;                // divisor1,divisor2;
+       int tmp;                /*  divisor1,divisor2; */
        unsigned int ui_ConvertTime = 0;
        unsigned int ui_ConvertTimeBase = 0;
        unsigned int ui_DelayTime = 0;
@@ -2576,7 +2576,7 @@ int i_APCI3200_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_
        int i_Cpt = 0;
        double d_ConversionTimeForAllChannels = 0.0;
        double d_SCANTimeNewUnit = 0.0;
-       // step 1: make sure trigger sources are trivially valid
+       /*  step 1: make sure trigger sources are trivially valid */
 
        tmp = cmd->start_src;
        cmd->start_src &= TRIG_NOW | TRIG_EXT;
@@ -2598,10 +2598,10 @@ int i_APCI3200_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_
        cmd->stop_src &= TRIG_COUNT | TRIG_NONE;
        if (!cmd->stop_src || tmp != cmd->stop_src)
                err++;
-       //if(i_InterruptFlag==0)
+       /* if(i_InterruptFlag==0) */
        if (s_BoardInfos[dev->minor].i_InterruptFlag == 0) {
                err++;
-               //          printk("\nThe interrupt should be enabled\n");
+               /*           printk("\nThe interrupt should be enabled\n"); */
        }
        if (err) {
                i_APCI3200_Reset(dev);
@@ -2643,9 +2643,9 @@ int i_APCI3200_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_
                i_APCI3200_Reset(dev);
                return 2;
        }
-       //i_FirstChannel=cmd->chanlist[0];
+       /* i_FirstChannel=cmd->chanlist[0]; */
        s_BoardInfos[dev->minor].i_FirstChannel = cmd->chanlist[0];
-       //i_LastChannel=cmd->chanlist[1];
+       /* i_LastChannel=cmd->chanlist[1]; */
        s_BoardInfos[dev->minor].i_LastChannel = cmd->chanlist[1];
 
        if (cmd->convert_src == TRIG_TIMER) {
@@ -2656,11 +2656,11 @@ int i_APCI3200_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_
                {
                        printk("\nThe selection of conversion time reload value is in error\n");
                        err++;
-               }               // if (ui_ConvertTime!=20 && ui_ConvertTime!=40 && ui_ConvertTime!=80 && ui_ConvertTime!=160 )
+               }               /*  if (ui_ConvertTime!=20 && ui_ConvertTime!=40 && ui_ConvertTime!=80 && ui_ConvertTime!=160 ) */
                if (ui_ConvertTimeBase != 2) {
                        printk("\nThe selection of conversion time unit  is in error\n");
                        err++;
-               }               //if(ui_ConvertTimeBase!=2)
+               }               /* if(ui_ConvertTimeBase!=2) */
        } else {
                ui_ConvertTime = 0;
                ui_ConvertTimeBase = 0;
@@ -2668,7 +2668,7 @@ int i_APCI3200_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_
        if (cmd->scan_begin_src == TRIG_FOLLOW) {
                ui_DelayTime = 0;
                ui_DelayTimeBase = 0;
-       }                       //if(cmd->scan_begin_src==TRIG_FOLLOW)
+       }                       /* if(cmd->scan_begin_src==TRIG_FOLLOW) */
        else {
                ui_DelayTime = cmd->scan_begin_arg & 0xFFFF;
                ui_DelayTimeBase = cmd->scan_begin_arg >> 16;
@@ -2686,7 +2686,7 @@ int i_APCI3200_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_
                }
                fpu_begin();
                d_SCANTimeNewUnit = (double)ui_DelayTime;
-               //i_NbrOfChannel= i_LastChannel-i_FirstChannel + 4;
+               /* i_NbrOfChannel= i_LastChannel-i_FirstChannel + 4; */
                i_NbrOfChannel =
                        s_BoardInfos[dev->minor].i_LastChannel -
                        s_BoardInfos[dev->minor].i_FirstChannel + 4;
@@ -2736,7 +2736,7 @@ int i_APCI3200_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_
                        err++;
                }
                fpu_end();
-       }                       //else if(cmd->scan_begin_src==TRIG_FOLLOW)
+       }                       /* else if(cmd->scan_begin_src==TRIG_FOLLOW) */
 
        if (err) {
                i_APCI3200_Reset(dev);
@@ -2767,10 +2767,10 @@ int i_APCI3200_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_
 int i_APCI3200_StopCyclicAcquisition(struct comedi_device * dev, struct comedi_subdevice * s)
 {
        unsigned int ui_Configuration = 0;
-       //i_InterruptFlag=0;
-       //i_Initialised=0;
-       //i_Count=0;
-       //i_Sum=0;
+       /* i_InterruptFlag=0; */
+       /* i_Initialised=0; */
+       /* i_Count=0; */
+       /* i_Sum=0; */
        s_BoardInfos[dev->minor].i_InterruptFlag = 0;
        s_BoardInfos[dev->minor].i_Initialised = 0;
        s_BoardInfos[dev->minor].i_Count = 0;
@@ -2779,16 +2779,16 @@ int i_APCI3200_StopCyclicAcquisition(struct comedi_device * dev, struct comedi_s
   /*******************/
        /*Read the register */
   /*******************/
-       //ui_Configuration = inl(devpriv->iobase+i_Offset + 8);
+       /* ui_Configuration = inl(devpriv->iobase+i_Offset + 8); */
        ui_Configuration =
                inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
   /*****************************/
        /*Reset the START and IRQ bit */
   /*****************************/
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
-       //outl((ui_Configuration & 0xFFE7FFFF),devpriv->iobase+i_Offset + 8);
+       /* outl((ui_Configuration & 0xFFE7FFFF),devpriv->iobase+i_Offset + 8); */
        outl((ui_Configuration & 0xFFE7FFFF),
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
        return 0;
@@ -2818,7 +2818,7 @@ int i_APCI3200_CommandAnalogInput(struct comedi_device * dev, struct comedi_subd
 {
        struct comedi_cmd *cmd = &s->async->cmd;
        unsigned int ui_Configuration = 0;
-       //INT  i_CurrentSource = 0;
+       /* INT  i_CurrentSource = 0; */
        unsigned int ui_Trigger = 0;
        unsigned int ui_TriggerEdge = 0;
        unsigned int ui_Triggermode = 0;
@@ -2828,38 +2828,38 @@ int i_APCI3200_CommandAnalogInput(struct comedi_device * dev, struct comedi_subd
        unsigned int ui_DelayTime = 0;
        unsigned int ui_DelayTimeBase = 0;
        unsigned int ui_DelayMode = 0;
-       //i_FirstChannel=cmd->chanlist[0];
-       //i_LastChannel=cmd->chanlist[1];
+       /* i_FirstChannel=cmd->chanlist[0]; */
+       /* i_LastChannel=cmd->chanlist[1]; */
        s_BoardInfos[dev->minor].i_FirstChannel = cmd->chanlist[0];
        s_BoardInfos[dev->minor].i_LastChannel = cmd->chanlist[1];
        if (cmd->start_src == TRIG_EXT) {
                ui_Trigger = 1;
                ui_TriggerEdge = cmd->start_arg & 0xFFFF;
                ui_Triggermode = cmd->start_arg >> 16;
-       }                       //if(cmd->start_src==TRIG_EXT)
+       }                       /* if(cmd->start_src==TRIG_EXT) */
        else {
                ui_Trigger = 0;
-       }                       //elseif(cmd->start_src==TRIG_EXT)
+       }                       /* elseif(cmd->start_src==TRIG_EXT) */
 
        if (cmd->stop_src == TRIG_COUNT) {
                ui_ScanMode = 0;
-       }                       // if (cmd->stop_src==TRIG_COUNT)
+       }                       /*  if (cmd->stop_src==TRIG_COUNT) */
        else {
                ui_ScanMode = 2;
-       }                       //else if (cmd->stop_src==TRIG_COUNT)
+       }                       /* else if (cmd->stop_src==TRIG_COUNT) */
 
        if (cmd->scan_begin_src == TRIG_FOLLOW) {
                ui_DelayTime = 0;
                ui_DelayTimeBase = 0;
                ui_DelayMode = 0;
-       }                       //if(cmd->scan_begin_src==TRIG_FOLLOW)
+       }                       /* if(cmd->scan_begin_src==TRIG_FOLLOW) */
        else {
                ui_DelayTime = cmd->scan_begin_arg & 0xFFFF;
                ui_DelayTimeBase = cmd->scan_begin_arg >> 16;
                ui_DelayMode = 1;
-       }                       //else if(cmd->scan_begin_src==TRIG_FOLLOW)
-       //        printk("\nui_DelayTime=%u\n",ui_DelayTime);
-       //        printk("\nui_DelayTimeBase=%u\n",ui_DelayTimeBase);
+       }                       /* else if(cmd->scan_begin_src==TRIG_FOLLOW) */
+       /*         printk("\nui_DelayTime=%u\n",ui_DelayTime); */
+       /*         printk("\nui_DelayTimeBase=%u\n",ui_DelayTimeBase); */
        if (cmd->convert_src == TRIG_TIMER) {
                ui_ConvertTime = cmd->convert_arg & 0xFFFF;
                ui_ConvertTimeBase = cmd->convert_arg >> 16;
@@ -2868,34 +2868,34 @@ int i_APCI3200_CommandAnalogInput(struct comedi_device * dev, struct comedi_subd
                ui_ConvertTimeBase = 0;
        }
 
-       // if(i_ADDIDATAType ==1 || ((i_ADDIDATAType==2)))
-       //   {
+       /*  if(i_ADDIDATAType ==1 || ((i_ADDIDATAType==2))) */
+       /*    { */
   /**************************************************/
        /*Read the old configuration of the current source */
   /**************************************************/
-       //ui_Configuration = inl(devpriv->iobase+i_Offset + 12);
+       /* ui_Configuration = inl(devpriv->iobase+i_Offset + 12); */
        ui_Configuration =
                inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
   /***********************************************/
        /*Write the configuration of the current source */
   /***********************************************/
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
-       //outl((ui_Configuration & 0xFFC00000 ), devpriv->iobase+i_Offset +12);
+       /* outl((ui_Configuration & 0xFFC00000 ), devpriv->iobase+i_Offset +12); */
        outl((ui_Configuration & 0xFFC00000),
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
-       // }
+       /*  } */
        ui_Configuration = 0;
-       //     printk("\nfirstchannel=%u\n",i_FirstChannel);
-       //     printk("\nlastchannel=%u\n",i_LastChannel);
-       //     printk("\nui_Trigger=%u\n",ui_Trigger);
-       //     printk("\nui_TriggerEdge=%u\n",ui_TriggerEdge);
-       //     printk("\nui_Triggermode=%u\n",ui_Triggermode);
-       //      printk("\nui_DelayMode=%u\n",ui_DelayMode);
-       //     printk("\nui_ScanMode=%u\n",ui_ScanMode);
-
-       //ui_Configuration = i_FirstChannel |(i_LastChannel << 8)| 0x00100000 |
+       /*      printk("\nfirstchannel=%u\n",i_FirstChannel); */
+       /*      printk("\nlastchannel=%u\n",i_LastChannel); */
+       /*      printk("\nui_Trigger=%u\n",ui_Trigger); */
+       /*      printk("\nui_TriggerEdge=%u\n",ui_TriggerEdge); */
+       /*      printk("\nui_Triggermode=%u\n",ui_Triggermode); */
+       /*       printk("\nui_DelayMode=%u\n",ui_DelayMode); */
+       /*      printk("\nui_ScanMode=%u\n",ui_ScanMode); */
+
+       /* ui_Configuration = i_FirstChannel |(i_LastChannel << 8)| 0x00100000 | */
        ui_Configuration =
                s_BoardInfos[dev->minor].i_FirstChannel | (s_BoardInfos[dev->
                        minor].
@@ -2906,80 +2906,80 @@ int i_APCI3200_CommandAnalogInput(struct comedi_device * dev, struct comedi_subd
   /*************************/
        /*Write the Configuration */
   /*************************/
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
-       //outl( ui_Configuration, devpriv->iobase+i_Offset + 0x8);
+       /* outl( ui_Configuration, devpriv->iobase+i_Offset + 0x8); */
        outl(ui_Configuration,
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 0x8);
   /***********************/
        /*Write the Delay Value */
   /***********************/
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
-       //outl(ui_DelayTime,devpriv->iobase+i_Offset + 40);
+       /* outl(ui_DelayTime,devpriv->iobase+i_Offset + 40); */
        outl(ui_DelayTime,
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 40);
   /***************************/
        /*Write the Delay time base */
   /***************************/
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
-       //outl(ui_DelayTimeBase,devpriv->iobase+i_Offset + 44);
+       /* outl(ui_DelayTimeBase,devpriv->iobase+i_Offset + 44); */
        outl(ui_DelayTimeBase,
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 44);
   /*********************************/
        /*Write the conversion time value */
   /*********************************/
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
-       //outl(ui_ConvertTime,devpriv->iobase+i_Offset + 32);
+       /* outl(ui_ConvertTime,devpriv->iobase+i_Offset + 32); */
        outl(ui_ConvertTime,
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32);
 
   /********************************/
        /*Write the conversion time base */
   /********************************/
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
-       //outl(ui_ConvertTimeBase,devpriv->iobase+i_Offset + 36);
+       /* outl(ui_ConvertTimeBase,devpriv->iobase+i_Offset + 36); */
        outl(ui_ConvertTimeBase,
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36);
   /*******************/
        /*Read the register */
   /*******************/
-       //ui_Configuration = inl(devpriv->iobase+i_Offset + 4);
+       /* ui_Configuration = inl(devpriv->iobase+i_Offset + 4); */
        ui_Configuration =
                inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4);
   /******************/
        /*Set the SCAN bit */
   /******************/
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
 
-       //outl(((ui_Configuration & 0x1E0FF) | 0x00002000),devpriv->iobase+i_Offset + 4);
+       /* outl(((ui_Configuration & 0x1E0FF) | 0x00002000),devpriv->iobase+i_Offset + 4); */
        outl(((ui_Configuration & 0x1E0FF) | 0x00002000),
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4);
   /*******************/
        /*Read the register */
   /*******************/
        ui_Configuration = 0;
-       //ui_Configuration = inl(devpriv->iobase+i_Offset + 8);
+       /* ui_Configuration = inl(devpriv->iobase+i_Offset + 8); */
        ui_Configuration =
                inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
 
   /*******************/
        /*Set the START bit */
   /*******************/
-       //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+       /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
        while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
                                        12) >> 19) & 1) != 1) ;
-       //outl((ui_Configuration | 0x00080000),devpriv->iobase+i_Offset + 8);
+       /* outl((ui_Configuration | 0x00080000),devpriv->iobase+i_Offset + 8); */
        outl((ui_Configuration | 0x00080000),
                devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
        return 0;
@@ -3005,10 +3005,10 @@ int i_APCI3200_Reset(struct comedi_device * dev)
 {
        int i_Temp;
        unsigned int dw_Dummy;
-       //i_InterruptFlag=0;
-       //i_Initialised==0;
-       //i_Count=0;
-       //i_Sum=0;
+       /* i_InterruptFlag=0; */
+       /* i_Initialised==0; */
+       /* i_Count=0; */
+       /* i_Sum=0; */
 
        s_BoardInfos[dev->minor].i_InterruptFlag = 0;
        s_BoardInfos[dev->minor].i_Initialised = 0;
@@ -3018,17 +3018,17 @@ int i_APCI3200_Reset(struct comedi_device * dev)
 
        outl(0x83838383, devpriv->i_IobaseAmcc + 0x60);
 
-       // Enable the interrupt for the controler
+       /*  Enable the interrupt for the controler */
        dw_Dummy = inl(devpriv->i_IobaseAmcc + 0x38);
        outl(dw_Dummy | 0x2000, devpriv->i_IobaseAmcc + 0x38);
-       outl(0, devpriv->i_IobaseAddon);        //Resets the output
+       outl(0, devpriv->i_IobaseAddon);        /* Resets the output */
   /***************/
        /*Empty the buffer */
   /**************/
        for (i_Temp = 0; i_Temp <= 95; i_Temp++) {
-               //ui_InterruptChannelValue[i_Temp]=0;
+               /* ui_InterruptChannelValue[i_Temp]=0; */
                s_BoardInfos[dev->minor].ui_InterruptChannelValue[i_Temp] = 0;
-       }                       //for(i_Temp=0;i_Temp<=95;i_Temp++)
+       }                       /* for(i_Temp=0;i_Temp<=95;i_Temp++) */
   /*****************************/
        /*Reset the START and IRQ bit */
   /*****************************/
@@ -3036,7 +3036,7 @@ int i_APCI3200_Reset(struct comedi_device * dev)
                while (((inl(devpriv->iobase + i_Temp + 12) >> 19) & 1) != 1) ;
                outl(0, devpriv->iobase + i_Temp + 8);
                i_Temp = i_Temp + 64;
-       }                       //for(i_Temp=0;i_Temp<=192;i_Temp+64)
+       }                       /* for(i_Temp=0;i_Temp<=192;i_Temp+64) */
        return 0;
 }
 
@@ -3069,17 +3069,17 @@ void v_APCI3200_Interrupt(int irq, void *d)
        unsigned int ui_DigitalInput = 0;
        int i_ConvertCJCCalibration;
 
-       //BEGIN JK TEST
+       /* BEGIN JK TEST */
        int i_ReturnValue = 0;
-       //END JK TEST
+       /* END JK TEST */
 
-       //printk ("\n i_ScanType = %i i_ADDIDATAType = %i", s_BoardInfos [dev->minor].i_ScanType, s_BoardInfos [dev->minor].i_ADDIDATAType);
+       /* printk ("\n i_ScanType = %i i_ADDIDATAType = %i", s_BoardInfos [dev->minor].i_ScanType, s_BoardInfos [dev->minor].i_ADDIDATAType); */
 
-       //switch(i_ScanType)
+       /* switch(i_ScanType) */
        switch (s_BoardInfos[dev->minor].i_ScanType) {
        case 0:
        case 1:
-               //switch(i_ADDIDATAType)
+               /* switch(i_ADDIDATAType) */
                switch (s_BoardInfos[dev->minor].i_ADDIDATAType) {
                case 0:
                case 1:
@@ -3087,12 +3087,12 @@ void v_APCI3200_Interrupt(int irq, void *d)
          /************************************/
                        /*Read the interrupt status register */
          /************************************/
-                       //ui_StatusRegister = inl(devpriv->iobase+i_Offset + 16);
+                       /* ui_StatusRegister = inl(devpriv->iobase+i_Offset + 16); */
                        ui_StatusRegister =
                                inl(devpriv->iobase +
                                s_BoardInfos[dev->minor].i_Offset + 16);
                        if ((ui_StatusRegister & 0x2) == 0x2) {
-                               //i_CalibrationFlag = ((inl(devpriv->iobase+i_Offset + 12) & 0x00060000) >> 17);
+                               /* i_CalibrationFlag = ((inl(devpriv->iobase+i_Offset + 12) & 0x00060000) >> 17); */
                                i_CalibrationFlag =
                                        ((inl(devpriv->iobase +
                                                        s_BoardInfos[dev->
@@ -3103,12 +3103,12 @@ void v_APCI3200_Interrupt(int irq, void *d)
              /*************************/
                                /*Read the channel number */
              /*************************/
-                               //ui_ChannelNumber = inl(devpriv->iobase+i_Offset + 24);
+                               /* ui_ChannelNumber = inl(devpriv->iobase+i_Offset + 24); */
 
              /*************************************/
                                /*Read the digital analog input value */
              /*************************************/
-                               //ui_DigitalInput = inl(devpriv->iobase+i_Offset + 28);
+                               /* ui_DigitalInput = inl(devpriv->iobase+i_Offset + 28); */
                                ui_DigitalInput =
                                        inl(devpriv->iobase +
                                        s_BoardInfos[dev->minor].i_Offset + 28);
@@ -3117,13 +3117,13 @@ void v_APCI3200_Interrupt(int irq, void *d)
                                /* Test if the value read is the channel value */
              /***********************************************/
                                if (i_CalibrationFlag == 0) {
-                                       //ui_InterruptChannelValue[i_Count + 0] = ui_DigitalInput;
+                                       /* ui_InterruptChannelValue[i_Count + 0] = ui_DigitalInput; */
                                        s_BoardInfos[dev->minor].
                                                ui_InterruptChannelValue
                                                [s_BoardInfos[dev->minor].
                                                i_Count + 0] = ui_DigitalInput;
 
-                                       //Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+                                       /* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
                                        /*
                                           printk("\n 1 - i_APCI3200_GetChannelCalibrationValue (dev, s_BoardInfos %i", ui_ChannelNumber);
                                           i_APCI3200_GetChannelCalibrationValue (dev, s_BoardInfos [dev->minor].ui_Channel_num,
@@ -3131,14 +3131,14 @@ void v_APCI3200_Interrupt(int irq, void *d)
                                           &s_BoardInfos [dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count + 7],
                                           &s_BoardInfos [dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count + 8]);
                                         */
-                                       //End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+                                       /* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 
                  /******************************************************/
                                        /*Start the conversion of the calibration offset value */
                  /******************************************************/
                                        i_APCI3200_ReadCalibrationOffsetValue
                                                (dev, &ui_DummyValue);
-                               }       //if (i_CalibrationFlag == 0)
+                               }       /* if (i_CalibrationFlag == 0) */
              /**********************************************************/
                                /* Test if the value read is the calibration offset value */
              /**********************************************************/
@@ -3149,7 +3149,7 @@ void v_APCI3200_Interrupt(int irq, void *d)
                                        /* Save the value */
                  /******************/
 
-                                       //ui_InterruptChannelValue[i_Count + 1] = ui_DigitalInput;
+                                       /* ui_InterruptChannelValue[i_Count + 1] = ui_DigitalInput; */
                                        s_BoardInfos[dev->minor].
                                                ui_InterruptChannelValue
                                                [s_BoardInfos[dev->minor].
@@ -3160,7 +3160,7 @@ void v_APCI3200_Interrupt(int irq, void *d)
                  /******************************************************/
                                        i_APCI3200_ReadCalibrationGainValue(dev,
                                                &ui_DummyValue);
-                               }       //if (i_CalibrationFlag == 1)
+                               }       /* if (i_CalibrationFlag == 1) */
              /******************************************************/
                                /*Test if the value read is the calibration gain value */
              /******************************************************/
@@ -3170,48 +3170,48 @@ void v_APCI3200_Interrupt(int irq, void *d)
                  /****************/
                                        /*Save the value */
                  /****************/
-                                       //ui_InterruptChannelValue[i_Count + 2] = ui_DigitalInput;
+                                       /* ui_InterruptChannelValue[i_Count + 2] = ui_DigitalInput; */
                                        s_BoardInfos[dev->minor].
                                                ui_InterruptChannelValue
                                                [s_BoardInfos[dev->minor].
                                                i_Count + 2] = ui_DigitalInput;
-                                       //if(i_ScanType==1)
+                                       /* if(i_ScanType==1) */
                                        if (s_BoardInfos[dev->minor].
                                                i_ScanType == 1) {
 
-                                               //i_InterruptFlag=0;
+                                               /* i_InterruptFlag=0; */
                                                s_BoardInfos[dev->minor].
                                                        i_InterruptFlag = 0;
-                                               //i_Count=i_Count + 6;
-                                               //Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
-                                               //s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count + 6;
+                                               /* i_Count=i_Count + 6; */
+                                               /* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
+                                               /* s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count + 6; */
                                                s_BoardInfos[dev->minor].
                                                        i_Count =
                                                        s_BoardInfos[dev->
                                                        minor].i_Count + 9;
-                                               //End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
-                                       }       //if(i_ScanType==1)
+                                               /* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
+                                       }       /* if(i_ScanType==1) */
                                        else {
-                                               //i_Count=0;
+                                               /* i_Count=0; */
                                                s_BoardInfos[dev->minor].
                                                        i_Count = 0;
-                                       }       //elseif(i_ScanType==1)
-                                       //if(i_ScanType!=1)
+                                       }       /* elseif(i_ScanType==1) */
+                                       /* if(i_ScanType!=1) */
                                        if (s_BoardInfos[dev->minor].
                                                i_ScanType != 1) {
-                                               i_ReturnValue = send_sig(SIGIO, devpriv->tsk_Current, 0);       // send signal to the sample
-                                       }       //if(i_ScanType!=1)
+                                               i_ReturnValue = send_sig(SIGIO, devpriv->tsk_Current, 0);       /*  send signal to the sample */
+                                       }       /* if(i_ScanType!=1) */
                                        else {
-                                               //if(i_ChannelCount==i_Sum)
+                                               /* if(i_ChannelCount==i_Sum) */
                                                if (s_BoardInfos[dev->minor].
                                                        i_ChannelCount ==
                                                        s_BoardInfos[dev->
                                                                minor].i_Sum) {
-                                                       send_sig(SIGIO, devpriv->tsk_Current, 0);       // send signal to the sample
+                                                       send_sig(SIGIO, devpriv->tsk_Current, 0);       /*  send signal to the sample */
                                                }
-                                       }       //if(i_ScanType!=1)
-                               }       //if (i_CalibrationFlag == 2)
-                       }       // if ((ui_StatusRegister & 0x2) == 0x2)
+                                       }       /* if(i_ScanType!=1) */
+                               }       /* if (i_CalibrationFlag == 2) */
+                       }       /*  if ((ui_StatusRegister & 0x2) == 0x2) */
 
                        break;
 
@@ -3220,7 +3220,7 @@ void v_APCI3200_Interrupt(int irq, void *d)
                        /*Read the interrupt status register */
          /************************************/
 
-                       //ui_StatusRegister = inl(devpriv->iobase+i_Offset + 16);
+                       /* ui_StatusRegister = inl(devpriv->iobase+i_Offset + 16); */
                        ui_StatusRegister =
                                inl(devpriv->iobase +
                                s_BoardInfos[dev->minor].i_Offset + 16);
@@ -3230,7 +3230,7 @@ void v_APCI3200_Interrupt(int irq, void *d)
 
                        if ((ui_StatusRegister & 0x2) == 0x2) {
 
-                               //i_CJCFlag = ((inl(devpriv->iobase+i_Offset + 4) & 0x00000400) >> 10);
+                               /* i_CJCFlag = ((inl(devpriv->iobase+i_Offset + 4) & 0x00000400) >> 10); */
                                i_CJCFlag =
                                        ((inl(devpriv->iobase +
                                                        s_BoardInfos[dev->
@@ -3238,7 +3238,7 @@ void v_APCI3200_Interrupt(int irq, void *d)
                                                        i_Offset +
                                                        4) & 0x00000400) >> 10);
 
-                               //i_CalibrationFlag = ((inl(devpriv->iobase+i_Offset + 12) & 0x00060000) >> 17);
+                               /* i_CalibrationFlag = ((inl(devpriv->iobase+i_Offset + 12) & 0x00060000) >> 17); */
                                i_CalibrationFlag =
                                        ((inl(devpriv->iobase +
                                                        s_BoardInfos[dev->
@@ -3251,19 +3251,19 @@ void v_APCI3200_Interrupt(int irq, void *d)
                                /*Read the channel number */
              /*************************/
 
-                               //ui_ChannelNumber = inl(devpriv->iobase+i_Offset + 24);
+                               /* ui_ChannelNumber = inl(devpriv->iobase+i_Offset + 24); */
                                ui_ChannelNumber =
                                        inl(devpriv->iobase +
                                        s_BoardInfos[dev->minor].i_Offset + 24);
-                               //Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+                               /* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
                                s_BoardInfos[dev->minor].ui_Channel_num =
                                        ui_ChannelNumber;
-                               //End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+                               /* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 
              /************************************/
                                /*Read the digital temperature value */
              /************************************/
-                               //ui_DigitalTemperature = inl(devpriv->iobase+i_Offset + 28);
+                               /* ui_DigitalTemperature = inl(devpriv->iobase+i_Offset + 28); */
                                ui_DigitalTemperature =
                                        inl(devpriv->iobase +
                                        s_BoardInfos[dev->minor].i_Offset + 28);
@@ -3274,7 +3274,7 @@ void v_APCI3200_Interrupt(int irq, void *d)
 
                                if ((i_CalibrationFlag == 0)
                                        && (i_CJCFlag == 0)) {
-                                       //ui_InterruptChannelValue[i_Count + 0]=ui_DigitalTemperature;
+                                       /* ui_InterruptChannelValue[i_Count + 0]=ui_DigitalTemperature; */
                                        s_BoardInfos[dev->minor].
                                                ui_InterruptChannelValue
                                                [s_BoardInfos[dev->minor].
@@ -3287,7 +3287,7 @@ void v_APCI3200_Interrupt(int irq, void *d)
                                        i_APCI3200_ReadCJCValue(dev,
                                                &ui_DummyValue);
 
-                               }       //if ((i_CalibrationFlag == 0) && (i_CJCFlag == 0))
+                               }       /* if ((i_CalibrationFlag == 0) && (i_CJCFlag == 0)) */
 
                 /*****************************************/
                                /*Test if the value read is the CJC value */
@@ -3295,7 +3295,7 @@ void v_APCI3200_Interrupt(int irq, void *d)
 
                                if ((i_CJCFlag == 1)
                                        && (i_CalibrationFlag == 0)) {
-                                       //ui_InterruptChannelValue[i_Count + 3]=ui_DigitalTemperature;
+                                       /* ui_InterruptChannelValue[i_Count + 3]=ui_DigitalTemperature; */
                                        s_BoardInfos[dev->minor].
                                                ui_InterruptChannelValue
                                                [s_BoardInfos[dev->minor].
@@ -3307,7 +3307,7 @@ void v_APCI3200_Interrupt(int irq, void *d)
                  /******************************************************/
                                        i_APCI3200_ReadCalibrationOffsetValue
                                                (dev, &ui_DummyValue);
-                               }       // if ((i_CJCFlag == 1) && (i_CalibrationFlag == 0))
+                               }       /*  if ((i_CJCFlag == 1) && (i_CalibrationFlag == 0)) */
 
                 /********************************************************/
                                /*Test if the value read is the calibration offset value */
@@ -3315,7 +3315,7 @@ void v_APCI3200_Interrupt(int irq, void *d)
 
                                if ((i_CalibrationFlag == 1)
                                        && (i_CJCFlag == 0)) {
-                                       //ui_InterruptChannelValue[i_Count + 1]=ui_DigitalTemperature;
+                                       /* ui_InterruptChannelValue[i_Count + 1]=ui_DigitalTemperature; */
                                        s_BoardInfos[dev->minor].
                                                ui_InterruptChannelValue
                                                [s_BoardInfos[dev->minor].
@@ -3328,7 +3328,7 @@ void v_APCI3200_Interrupt(int irq, void *d)
                                        i_APCI3200_ReadCalibrationGainValue(dev,
                                                &ui_DummyValue);
 
-                               }       //if ((i_CalibrationFlag == 1) && (i_CJCFlag == 0))
+                               }       /* if ((i_CalibrationFlag == 1) && (i_CJCFlag == 0)) */
 
              /******************************************************/
                                /*Test if the value read is the calibration gain value */
@@ -3336,7 +3336,7 @@ void v_APCI3200_Interrupt(int irq, void *d)
 
                                if ((i_CalibrationFlag == 2)
                                        && (i_CJCFlag == 0)) {
-                                       //ui_InterruptChannelValue[i_Count + 2]=ui_DigitalTemperature;
+                                       /* ui_InterruptChannelValue[i_Count + 2]=ui_DigitalTemperature; */
                                        s_BoardInfos[dev->minor].
                                                ui_InterruptChannelValue
                                                [s_BoardInfos[dev->minor].
@@ -3349,15 +3349,15 @@ void v_APCI3200_Interrupt(int irq, void *d)
 
                                        /*Test if the polarity is the same */
                  /**********************************/
-                                       //if(i_CJCPolarity!=i_ADDIDATAPolarity)
+                                       /* if(i_CJCPolarity!=i_ADDIDATAPolarity) */
                                        if (s_BoardInfos[dev->minor].
                                                i_CJCPolarity !=
                                                s_BoardInfos[dev->minor].
                                                i_ADDIDATAPolarity) {
                                                i_ConvertCJCCalibration = 1;
-                                       }       //if(i_CJCPolarity!=i_ADDIDATAPolarity)
+                                       }       /* if(i_CJCPolarity!=i_ADDIDATAPolarity) */
                                        else {
-                                               //if(i_CJCGain==i_ADDIDATAGain)
+                                               /* if(i_CJCGain==i_ADDIDATAGain) */
                                                if (s_BoardInfos[dev->minor].
                                                        i_CJCGain ==
                                                        s_BoardInfos[dev->
@@ -3365,12 +3365,12 @@ void v_APCI3200_Interrupt(int irq, void *d)
                                                        i_ADDIDATAGain) {
                                                        i_ConvertCJCCalibration
                                                                = 0;
-                                               }       //if(i_CJCGain==i_ADDIDATAGain)
+                                               }       /* if(i_CJCGain==i_ADDIDATAGain) */
                                                else {
                                                        i_ConvertCJCCalibration
                                                                = 1;
-                                               }       //elseif(i_CJCGain==i_ADDIDATAGain)
-                                       }       //elseif(i_CJCPolarity!=i_ADDIDATAPolarity)
+                                               }       /* elseif(i_CJCGain==i_ADDIDATAGain) */
+                                       }       /* elseif(i_CJCPolarity!=i_ADDIDATAPolarity) */
                                        if (i_ConvertCJCCalibration == 1) {
                      /****************************************************************/
                                                /*Start the conversion of the calibration gain value for the CJC */
@@ -3378,10 +3378,10 @@ void v_APCI3200_Interrupt(int irq, void *d)
                                                i_APCI3200_ReadCJCCalOffset(dev,
                                                        &ui_DummyValue);
 
-                                       }       //if(i_ConvertCJCCalibration==1)
+                                       }       /* if(i_ConvertCJCCalibration==1) */
                                        else {
-                                               //ui_InterruptChannelValue[i_Count + 4]=0;
-                                               //ui_InterruptChannelValue[i_Count + 5]=0;
+                                               /* ui_InterruptChannelValue[i_Count + 4]=0; */
+                                               /* ui_InterruptChannelValue[i_Count + 5]=0; */
                                                s_BoardInfos[dev->minor].
                                                        ui_InterruptChannelValue
                                                        [s_BoardInfos[dev->
@@ -3392,8 +3392,8 @@ void v_APCI3200_Interrupt(int irq, void *d)
                                                        [s_BoardInfos[dev->
                                                                minor].i_Count +
                                                        5] = 0;
-                                       }       //elseif(i_ConvertCJCCalibration==1)
-                               }       //else if ((i_CalibrationFlag == 2) && (i_CJCFlag == 0))
+                                       }       /* elseif(i_ConvertCJCCalibration==1) */
+                               }       /* else if ((i_CalibrationFlag == 2) && (i_CJCFlag == 0)) */
 
                 /********************************************************************/
                                /*Test if the value read is the calibration offset value for the CJC */
@@ -3401,7 +3401,7 @@ void v_APCI3200_Interrupt(int irq, void *d)
 
                                if ((i_CalibrationFlag == 1)
                                        && (i_CJCFlag == 1)) {
-                                       //ui_InterruptChannelValue[i_Count + 4]=ui_DigitalTemperature;
+                                       /* ui_InterruptChannelValue[i_Count + 4]=ui_DigitalTemperature; */
                                        s_BoardInfos[dev->minor].
                                                ui_InterruptChannelValue
                                                [s_BoardInfos[dev->minor].
@@ -3414,7 +3414,7 @@ void v_APCI3200_Interrupt(int irq, void *d)
                                        i_APCI3200_ReadCJCCalGain(dev,
                                                &ui_DummyValue);
 
-                               }       //if ((i_CalibrationFlag == 1) && (i_CJCFlag == 1))
+                               }       /* if ((i_CalibrationFlag == 1) && (i_CJCFlag == 1)) */
 
              /******************************************************************/
                                /*Test if the value read is the calibration gain value for the CJC */
@@ -3422,61 +3422,61 @@ void v_APCI3200_Interrupt(int irq, void *d)
 
                                if ((i_CalibrationFlag == 2)
                                        && (i_CJCFlag == 1)) {
-                                       //ui_InterruptChannelValue[i_Count + 5]=ui_DigitalTemperature;
+                                       /* ui_InterruptChannelValue[i_Count + 5]=ui_DigitalTemperature; */
                                        s_BoardInfos[dev->minor].
                                                ui_InterruptChannelValue
                                                [s_BoardInfos[dev->minor].
                                                i_Count + 5] =
                                                ui_DigitalTemperature;
 
-                                       //if(i_ScanType==1)
+                                       /* if(i_ScanType==1) */
                                        if (s_BoardInfos[dev->minor].
                                                i_ScanType == 1) {
 
-                                               //i_InterruptFlag=0;
+                                               /* i_InterruptFlag=0; */
                                                s_BoardInfos[dev->minor].
                                                        i_InterruptFlag = 0;
-                                               //i_Count=i_Count + 6;
-                                               //Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
-                                               //s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count + 6;
+                                               /* i_Count=i_Count + 6; */
+                                               /* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
+                                               /* s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count + 6; */
                                                s_BoardInfos[dev->minor].
                                                        i_Count =
                                                        s_BoardInfos[dev->
                                                        minor].i_Count + 9;
-                                               //End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
-                                       }       //if(i_ScanType==1)
+                                               /* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
+                                       }       /* if(i_ScanType==1) */
                                        else {
-                                               //i_Count=0;
+                                               /* i_Count=0; */
                                                s_BoardInfos[dev->minor].
                                                        i_Count = 0;
-                                       }       //elseif(i_ScanType==1)
+                                       }       /* elseif(i_ScanType==1) */
 
-                                       //if(i_ScanType!=1)
+                                       /* if(i_ScanType!=1) */
                                        if (s_BoardInfos[dev->minor].
                                                i_ScanType != 1) {
-                                               send_sig(SIGIO, devpriv->tsk_Current, 0);       // send signal to the sample
-                                       }       //if(i_ScanType!=1)
+                                               send_sig(SIGIO, devpriv->tsk_Current, 0);       /*  send signal to the sample */
+                                       }       /* if(i_ScanType!=1) */
                                        else {
-                                               //if(i_ChannelCount==i_Sum)
+                                               /* if(i_ChannelCount==i_Sum) */
                                                if (s_BoardInfos[dev->minor].
                                                        i_ChannelCount ==
                                                        s_BoardInfos[dev->
                                                                minor].i_Sum) {
-                                                       send_sig(SIGIO, devpriv->tsk_Current, 0);       // send signal to the sample
+                                                       send_sig(SIGIO, devpriv->tsk_Current, 0);       /*  send signal to the sample */
 
-                                               }       //if(i_ChannelCount==i_Sum)
-                                       }       //else if(i_ScanType!=1)
-                               }       //if ((i_CalibrationFlag == 2) && (i_CJCFlag == 1))
+                                               }       /* if(i_ChannelCount==i_Sum) */
+                                       }       /* else if(i_ScanType!=1) */
+                               }       /* if ((i_CalibrationFlag == 2) && (i_CJCFlag == 1)) */
 
-                       }       //else if ((ui_StatusRegister & 0x2) == 0x2)
+                       }       /* else if ((ui_StatusRegister & 0x2) == 0x2) */
                        break;
-               }               //switch(i_ADDIDATAType)
+               }               /* switch(i_ADDIDATAType) */
                break;
        case 2:
        case 3:
                i_APCI3200_InterruptHandleEos(dev);
                break;
-       }                       //switch(i_ScanType)
+       }                       /* switch(i_ScanType) */
        return;
 }
 
@@ -3504,17 +3504,17 @@ int i_APCI3200_InterruptHandleEos(struct comedi_device * dev)
        unsigned int ui_StatusRegister = 0;
        struct comedi_subdevice *s = dev->subdevices + 0;
 
-       //BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
-       //comedi_async *async = s->async;
-       //UINT *data;
-       //data=async->data+async->buf_int_ptr;//new samples added from here onwards
+       /* BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+       /* comedi_async *async = s->async; */
+       /* UINT *data; */
+       /* data=async->data+async->buf_int_ptr;//new samples added from here onwards */
        int n = 0, i = 0;
-       //END JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
+       /* END JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
 
   /************************************/
        /*Read the interrupt status register */
   /************************************/
-       //ui_StatusRegister = inl(devpriv->iobase+i_Offset + 16);
+       /* ui_StatusRegister = inl(devpriv->iobase+i_Offset + 16); */
        ui_StatusRegister =
                inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 16);
 
@@ -3526,33 +3526,33 @@ int i_APCI3200_InterruptHandleEos(struct comedi_device * dev)
       /*************************/
                /*Read the channel number */
       /*************************/
-               //ui_ChannelNumber = inl(devpriv->iobase+i_Offset + 24);
-               //BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
-               //This value is not used
-               //ui_ChannelNumber = inl(devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 24);
+               /* ui_ChannelNumber = inl(devpriv->iobase+i_Offset + 24); */
+               /* BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+               /* This value is not used */
+               /* ui_ChannelNumber = inl(devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 24); */
                s->async->events = 0;
-               //END JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
+               /* END JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
 
       /*************************************/
                /*Read the digital Analog Input value */
       /*************************************/
 
-               //data[i_Count] = inl(devpriv->iobase+i_Offset + 28);
-               //Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
-               //data[s_BoardInfos [dev->minor].i_Count] = inl(devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 28);
+               /* data[i_Count] = inl(devpriv->iobase+i_Offset + 28); */
+               /* Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+               /* data[s_BoardInfos [dev->minor].i_Count] = inl(devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 28); */
                s_BoardInfos[dev->minor].ui_ScanValueArray[s_BoardInfos[dev->
                                minor].i_Count] =
                        inl(devpriv->iobase +
                        s_BoardInfos[dev->minor].i_Offset + 28);
-               //End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
+               /* End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
 
-               //if((i_Count == (i_LastChannel-i_FirstChannel+3)))
+               /* if((i_Count == (i_LastChannel-i_FirstChannel+3))) */
                if ((s_BoardInfos[dev->minor].i_Count ==
                                (s_BoardInfos[dev->minor].i_LastChannel -
                                        s_BoardInfos[dev->minor].
                                        i_FirstChannel + 3))) {
 
-                       //Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+                       /* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
                        s_BoardInfos[dev->minor].i_Count++;
 
                        for (i = s_BoardInfos[dev->minor].i_FirstChannel;
@@ -3582,61 +3582,61 @@ int i_APCI3200_InterruptHandleEos(struct comedi_device * dev)
                                                        * 3) + 2]);
                        }
 
-                       //End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+                       /* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 
-                       //i_Count=-1;
+                       /* i_Count=-1; */
 
                        s_BoardInfos[dev->minor].i_Count = -1;
 
-                       //async->buf_int_count+=(i_LastChannel-i_FirstChannel+4)*sizeof(unsigned int);
-                       //Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
-                       //async->buf_int_count+=(s_BoardInfos [dev->minor].i_LastChannel-s_BoardInfos [dev->minor].i_FirstChannel+4)*sizeof(unsigned int);
-                       //End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
-                       //async->buf_int_ptr+=(i_LastChannel-i_FirstChannel+4)*sizeof(unsigned int);
-                       //Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
-                       //async->buf_int_ptr+=(s_BoardInfos [dev->minor].i_LastChannel-s_BoardInfos [dev->minor].i_FirstChannel+4)*sizeof(unsigned int);
-                       //comedi_eos(dev,s);
+                       /* async->buf_int_count+=(i_LastChannel-i_FirstChannel+4)*sizeof(unsigned int); */
+                       /* Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+                       /* async->buf_int_count+=(s_BoardInfos [dev->minor].i_LastChannel-s_BoardInfos [dev->minor].i_FirstChannel+4)*sizeof(unsigned int); */
+                       /* End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+                       /* async->buf_int_ptr+=(i_LastChannel-i_FirstChannel+4)*sizeof(unsigned int); */
+                       /* Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+                       /* async->buf_int_ptr+=(s_BoardInfos [dev->minor].i_LastChannel-s_BoardInfos [dev->minor].i_FirstChannel+4)*sizeof(unsigned int); */
+                       /* comedi_eos(dev,s); */
 
-                       // Set the event type (Comedi Buffer End Of Scan)
+                       /*  Set the event type (Comedi Buffer End Of Scan) */
                        s->async->events |= COMEDI_CB_EOS;
 
-                       // Test if enougth memory is available and allocate it for 7 values
-                       //n = comedi_buf_write_alloc(s->async, 7*sizeof(unsigned int));
+                       /*  Test if enougth memory is available and allocate it for 7 values */
+                       /* n = comedi_buf_write_alloc(s->async, 7*sizeof(unsigned int)); */
                        n = comedi_buf_write_alloc(s->async,
                                (7 + 12) * sizeof(unsigned int));
 
-                       // If not enougth memory available, event is set to Comedi Buffer Errror
+                       /*  If not enougth memory available, event is set to Comedi Buffer Errror */
                        if (n > ((7 + 12) * sizeof(unsigned int))) {
                                printk("\ncomedi_buf_write_alloc n = %i", n);
                                s->async->events |= COMEDI_CB_ERROR;
                        }
-                       // Write all 7 scan values in the comedi buffer
+                       /*  Write all 7 scan values in the comedi buffer */
                        comedi_buf_memcpy_to(s->async, 0,
                                (unsigned int *) s_BoardInfos[dev->minor].
                                ui_ScanValueArray, (7 + 12) * sizeof(unsigned int));
 
-                       // Update comedi buffer pinters indexes
+                       /*  Update comedi buffer pinters indexes */
                        comedi_buf_write_free(s->async,
                                (7 + 12) * sizeof(unsigned int));
 
-                       // Send events
+                       /*  Send events */
                        comedi_event(dev, s);
-                       //End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
-
-                       //BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
-                       //
-                       //if (s->async->buf_int_ptr>=s->async->data_len) //  for buffer rool over
-                       //  {
-                       //    /* buffer rollover */
-                       //    s->async->buf_int_ptr=0;
-                       //    comedi_eobuf(dev,s);
-                       //  }
-                       //End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
+                       /* End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+
+                       /* BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+                       /*  */
+                       /* if (s->async->buf_int_ptr>=s->async->data_len) //  for buffer rool over */
+                       /*   { */
+                       /*     /* buffer rollover */ */
+                       /*     s->async->buf_int_ptr=0; */
+                       /*     comedi_eobuf(dev,s); */
+                       /*   } */
+                       /* End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
                }
-               //i_Count++;
+               /* i_Count++; */
                s_BoardInfos[dev->minor].i_Count++;
        }
-       //i_InterruptFlag=0;
+       /* i_InterruptFlag=0; */
        s_BoardInfos[dev->minor].i_InterruptFlag = 0;
        return 0;
 }