PXA: Drop CERF250 board
authorMarek Vasut <marek.vasut@gmail.com>
Sun, 20 Nov 2011 04:18:28 +0000 (05:18 +0100)
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>
Tue, 6 Dec 2011 22:59:31 +0000 (23:59 +0100)
The board is unmaintained and maintainer doesn't respond.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
MAINTAINERS
board/cerf250/Makefile [deleted file]
board/cerf250/cerf250.c [deleted file]
board/cerf250/flash.c [deleted file]
boards.cfg
doc/README.scrapyard
include/configs/cerf250.h [deleted file]

index 4aa54d7..7a5407c 100644 (file)
@@ -712,10 +712,6 @@ Sergey Kubushyn <ksi@koi8.net>
        SONATA          ARM926EJS
        SCHMOOGIE       ARM926EJS
 
-Prakash Kumar <prakash@embedx.com>
-
-       cerf250         xscale/pxa
-
 Vipin Kumar <vipin.kumar@st.com>
 
        spear300        ARM926EJS (spear300 Soc)
diff --git a/board/cerf250/Makefile b/board/cerf250/Makefile
deleted file mode 100644 (file)
index cf4742e..0000000
+++ /dev/null
@@ -1,43 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB    = $(obj)lib$(BOARD).o
-
-COBJS  := cerf250.o flash.o
-
-SRCS   := $(COBJS:.o=.c)
-OBJS   := $(addprefix $(obj),$(COBJS))
-
-$(LIB):        $(obj).depend $(OBJS)
-       $(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/cerf250/cerf250.c b/board/cerf250/cerf250.c
deleted file mode 100644 (file)
index 043afea..0000000
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
-       /* We have RAM, disable cache */
-       dcache_disable();
-       icache_disable();
-
-       /* arch number of cerf PXA Board */
-       gd->bd->bi_arch_number = MACH_TYPE_PXA_CERF;
-
-       /* adress of boot parameters */
-       gd->bd->bi_boot_params = 0xa0000100;
-
-       return 0;
-}
-
-int board_late_init(void)
-{
-       setenv("stdout", "serial");
-       setenv("stderr", "serial");
-       return 0;
-}
-
-extern void pxa_dram_init(void);
-int dram_init(void)
-{
-       pxa_dram_init();
-       gd->ram_size = PHYS_SDRAM_1_SIZE;
-       return 0;
-}
-
-void dram_init_banksize(void)
-{
-       gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-       gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
-       int rc = 0;
-#ifdef CONFIG_SMC91111
-       rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
-       return rc;
-}
-#endif
diff --git a/board/cerf250/flash.c b/board/cerf250/flash.c
deleted file mode 100644 (file)
index e1e7807..0000000
+++ /dev/null
@@ -1,429 +0,0 @@
-/*
- * (C) Copyright 2001
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <linux/byteorder/swab.h>
-
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];   /* info for FLASH chips    */
-
-/* Board support for 1 or 2 flash devices */
-#define FLASH_PORT_WIDTH32
-#undef FLASH_PORT_WIDTH16
-
-#ifdef FLASH_PORT_WIDTH16
-#define FLASH_PORT_WIDTH               ushort
-#define FLASH_PORT_WIDTHV              vu_short
-#define SWAP(x)               __swab16(x)
-#else
-#define FLASH_PORT_WIDTH               ulong
-#define FLASH_PORT_WIDTHV              vu_long
-#define SWAP(x)               __swab32(x)
-#endif
-
-#define FPW       FLASH_PORT_WIDTH
-#define FPWV   FLASH_PORT_WIDTHV
-
-#define mb() __asm__ __volatile__ ("" : : : "memory")
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (FPW *addr, flash_info_t *info);
-static int write_data (flash_info_t *info, ulong dest, FPW data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-void inline spin_wheel (void);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-       int i;
-       ulong size = 0;
-
-       for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-               switch (i) {
-               case 0:
-                       flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
-                       flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
-                       break;
-               case 1:
-                       flash_get_size ((FPW *) PHYS_FLASH_2, &flash_info[i]);
-                       flash_get_offsets (PHYS_FLASH_2, &flash_info[i]);
-                       break;
-               default:
-                       panic ("configured too many flash banks!\n");
-                       break;
-               }
-               size += flash_info[i].size;
-       }
-
-       /* Protect monitor and environment sectors
-        */
-       flash_protect ( FLAG_PROTECT_SET,
-                       CONFIG_SYS_FLASH_BASE,
-                       CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
-                       &flash_info[0] );
-
-       flash_protect ( FLAG_PROTECT_SET,
-                       CONFIG_ENV_ADDR,
-                       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0] );
-
-       return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
-       int i;
-
-       if (info->flash_id == FLASH_UNKNOWN) {
-               return;
-       }
-
-       if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
-               for (i = 0; i < info->sector_count; i++) {
-                       info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
-                       info->protect[i] = 0;
-               }
-       }
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
-       int i;
-
-       if (info->flash_id == FLASH_UNKNOWN) {
-               printf ("missing or unknown FLASH type\n");
-               return;
-       }
-
-       switch (info->flash_id & FLASH_VENDMASK) {
-       case FLASH_MAN_INTEL:
-               printf ("INTEL ");
-               break;
-       default:
-               printf ("Unknown Vendor ");
-               break;
-       }
-
-       switch (info->flash_id & FLASH_TYPEMASK) {
-       case FLASH_28F128J3A:
-               printf ("28F128J3A\n");
-               break;
-       default:
-               printf ("Unknown Chip Type\n");
-               break;
-       }
-
-       printf ("  Size: %ld MB in %d Sectors\n",
-                       info->size >> 20, info->sector_count);
-
-       printf ("  Sector Start Addresses:");
-       for (i = 0; i < info->sector_count; ++i) {
-               if ((i % 5) == 0)
-                       printf ("\n   ");
-               printf (" %08lX%s",
-                       info->start[i],
-                       info->protect[i] ? " (RO)" : "     ");
-       }
-       printf ("\n");
-       return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (FPW *addr, flash_info_t *info)
-{
-       volatile FPW value;
-
-       /* Write auto select command: read Manufacturer ID */
-       addr[0x5555] = (FPW) 0x00AA00AA;
-       addr[0x2AAA] = (FPW) 0x00550055;
-       addr[0x5555] = (FPW) 0x00900090;
-
-       mb ();
-       value = addr[0];
-
-       switch (value) {
-
-       case (FPW) INTEL_MANUFACT:
-               info->flash_id = FLASH_MAN_INTEL;
-               break;
-
-       default:
-               info->flash_id = FLASH_UNKNOWN;
-               info->sector_count = 0;
-               info->size = 0;
-               addr[0] = (FPW) 0x00FF00FF;     /* restore read mode */
-               return (0);                     /* no or unknown flash  */
-       }
-
-       mb ();
-       value = addr[1];                        /* device ID        */
-
-       switch (value) {
-
-       case (FPW) INTEL_ID_28F128J3A:
-               info->flash_id += FLASH_28F128J3A;
-               info->sector_count = 128;
-               info->size = 0x02000000;
-               break;                          /* => 16 MB     */
-
-       default:
-               info->flash_id = FLASH_UNKNOWN;
-               break;
-       }
-
-       if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
-               printf ("** ERROR: sector count %d > max (%d) **\n",
-                       info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
-               info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-       }
-
-       addr[0] = (FPW) 0x00FF00FF;             /* restore read mode */
-
-       return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-       int flag, prot, sect;
-       ulong type, start;
-       int rcode = 0;
-
-       if ((s_first < 0) || (s_first > s_last)) {
-               if (info->flash_id == FLASH_UNKNOWN) {
-                       printf ("- missing\n");
-               } else {
-                       printf ("- no sectors to erase\n");
-               }
-               return 1;
-       }
-
-       type = (info->flash_id & FLASH_VENDMASK);
-       if ((type != FLASH_MAN_INTEL)) {
-               printf ("Can't erase unknown flash type %08lx - aborted\n",
-                       info->flash_id);
-               return 1;
-       }
-
-       prot = 0;
-       for (sect = s_first; sect <= s_last; ++sect) {
-               if (info->protect[sect]) {
-                       prot++;
-               }
-       }
-
-       if (prot) {
-               printf ("- Warning: %d protected sectors will not be erased!\n",
-                       prot);
-       } else {
-               printf ("\n");
-       }
-
-       /* Disable interrupts which might cause a timeout here */
-       flag = disable_interrupts ();
-
-       /* Start erase on unprotected sectors */
-       for (sect = s_first; sect <= s_last; sect++) {
-               if (info->protect[sect] == 0) { /* not protected */
-                       FPWV *addr = (FPWV *) (info->start[sect]);
-                       FPW status;
-
-                       printf ("Erasing sector %2d ... ", sect);
-
-                       /* arm simple, non interrupt dependent timer */
-                       start = get_timer(0);
-
-                       *addr = (FPW) 0x00500050;       /* clear status register */
-                       *addr = (FPW) 0x00200020;       /* erase setup */
-                       *addr = (FPW) 0x00D000D0;       /* erase confirm */
-
-                       while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-                               if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-                                       printf ("Timeout\n");
-                                       *addr = (FPW) 0x00B000B0;       /* suspend erase     */
-                                       *addr = (FPW) 0x00FF00FF;       /* reset to read mode */
-                                       rcode = 1;
-                                       break;
-                               }
-                       }
-
-                       *addr = 0x00500050;     /* clear status register cmd.   */
-                       *addr = 0x00FF00FF;     /* resest to read mode          */
-
-                       printf (" done\n");
-               }
-       }
-       return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-       ulong cp, wp;
-       FPW data;
-       int count, i, l, rc, port_width;
-
-       if (info->flash_id == FLASH_UNKNOWN) {
-               return 4;
-       }
-/* get lower word aligned address */
-#ifdef FLASH_PORT_WIDTH16
-       wp = (addr & ~1);
-       port_width = 2;
-#else
-       wp = (addr & ~3);
-       port_width = 4;
-#endif
-
-       /*
-        * handle unaligned start bytes
-        */
-       if ((l = addr - wp) != 0) {
-               data = 0;
-               for (i = 0, cp = wp; i < l; ++i, ++cp) {
-                       data = (data << 8) | (*(uchar *) cp);
-               }
-               for (; i < port_width && cnt > 0; ++i) {
-                       data = (data << 8) | *src++;
-                       --cnt;
-                       ++cp;
-               }
-               for (; cnt == 0 && i < port_width; ++i, ++cp) {
-                       data = (data << 8) | (*(uchar *) cp);
-               }
-
-               if ((rc = write_data (info, wp, SWAP (data))) != 0) {
-                       return (rc);
-               }
-               wp += port_width;
-       }
-
-       /*
-        * handle word aligned part
-        */
-       count = 0;
-       while (cnt >= port_width) {
-               data = 0;
-               for (i = 0; i < port_width; ++i) {
-                       data = (data << 8) | *src++;
-               }
-               if ((rc = write_data (info, wp, SWAP (data))) != 0) {
-                       return (rc);
-               }
-               wp += port_width;
-               cnt -= port_width;
-               if (count++ > 0x800) {
-                       spin_wheel ();
-                       count = 0;
-               }
-       }
-
-       if (cnt == 0) {
-               return (0);
-       }
-
-       /*
-        * handle unaligned tail bytes
-        */
-       data = 0;
-       for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
-               data = (data << 8) | *src++;
-               --cnt;
-       }
-       for (; i < port_width; ++i, ++cp) {
-               data = (data << 8) | (*(uchar *) cp);
-       }
-
-       return (write_data (info, wp, SWAP (data)));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word or halfword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data (flash_info_t *info, ulong dest, FPW data)
-{
-       FPWV *addr = (FPWV *) dest;
-       ulong status;
-       int flag;
-       ulong start;
-
-       /* Check if Flash is (sufficiently) erased */
-       if ((*addr & data) != data) {
-               printf ("not erased at %08lx (%lx)\n", (ulong) addr, *addr);
-               return (2);
-       }
-       /* Disable interrupts which might cause a timeout here */
-       flag = disable_interrupts ();
-
-       *addr = (FPW) 0x00400040;       /* write setup */
-       *addr = data;
-
-       /* arm simple, non interrupt dependent timer */
-       start = get_timer(0);
-
-       /* wait while polling the status register */
-       while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-               if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-                       *addr = (FPW) 0x00FF00FF;       /* restore read mode */
-                       return (1);
-               }
-       }
-
-       *addr = (FPW) 0x00FF00FF;       /* restore read mode */
-
-       return (0);
-}
-
-void inline spin_wheel (void)
-{
-       static int p = 0;
-       static char w[] = "\\/-";
-
-       printf ("\010%c", w[p]);
-       (++p == 3) ? (p = 0) : 0;
-}
index 8280cb9..82c705d 100644 (file)
@@ -216,7 +216,6 @@ actux3                       arm         ixp
 actux4                       arm         ixp
 dvlhost                      arm         ixp
 balloon3                     arm         pxa
-cerf250                      arm         pxa
 colibri_pxa270               arm         pxa
 cradle                       arm         pxa
 lubbock                      arm         pxa
index d37dbcf..732d92d 100644 (file)
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
 
 Board  Arch    CPU     removed     Commit      last known maintainer/contact
 =============================================================================
+cerf250 arm     pxa     a3f1241   2011-25-11    Prakash Kumar <prakash@embedx.com>
 mpq101 powerpc mpc85xx -         2011-10-23    Alex Dubov <oakad@yahoo.com>
 ixdpg425 arm   ixp     0ca8eb7   2011-09-22    Stefan Roese <sr@denx.de>
 ixdp425 arm    ixp     0ca8eb7   2011-09-22    Kyle Harris <kharris@nexus-tech.net>
diff --git a/include/configs/cerf250.h b/include/configs/cerf250.h
deleted file mode 100644 (file)
index 70427da..0000000
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * Configuation settings for the CERF250 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_PXA250          1       /* This is an PXA250 CPU    */
-#define CONFIG_CERF250         1       /* on Cerf PXA Board        */
-#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_BAUDRATE                38400
-#define        CONFIG_SYS_TEXT_BASE    0x0
-
-#undef CONFIG_USE_IRQ                  /* we don't need IRQ/FIQ stuff */
-
-/* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_DCACHE_OFF
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN      (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_SMC91111
-#define CONFIG_SMC91111_BASE 0x04000300
-#define CONFIG_SMC_USE_32_BIT
-
-/*
- * select serial console configuration
- */
-#define CONFIG_PXA_SERIAL
-#define CONFIG_FFUART       1  /* we use FFUART on CERF PXA */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-
-#define CONFIG_BOOTDELAY       3
-#define CONFIG_ETHADDR         00:D0:CA:F1:3C:D2
-#define CONFIG_NETMASK         255.255.255.0
-#define CONFIG_IPADDR          192.168.0.5
-#define CONFIG_SERVERIP                192.168.0.2
-#define CONFIG_BOOTCOMMAND     "bootm 0xC0000"
-#define CONFIG_BOOTARGS                "root=/dev/mtdblock3 rootfstype=jffs2 console=ttyS0,38400"
-#define CONFIG_CMDLINE_TAG
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  2               /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER         1
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
-
-#define CONFIG_SYS_LONGHELP                                    /* undef to save memory         */
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT                      "uboot$ "       /* Monitor Command Prompt */
-#else
-#define CONFIG_SYS_PROMPT                      "=> "           /* Monitor Command Prompt */
-#endif
-#define CONFIG_SYS_CBSIZE                      256                     /* Console I/O Buffer Size      */
-#define CONFIG_SYS_PBSIZE                      (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-                                                                               /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS                     16                      /* max number of command args   */
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
-#define CONFIG_SYS_DEVICE_NULLDEV      1
-
-#define CONFIG_SYS_MEMTEST_START       0xa0400000      /* memtest works on     */
-#define CONFIG_SYS_MEMTEST_END         0xa0800000      /* 4 ... 8 MB in DRAM   */
-
-#define CONFIG_SYS_LOAD_ADDR           0xa2000000      /* default load address */
-
-#define CONFIG_SYS_HZ                  1000
-#define CONFIG_SYS_CPUSPEED            0x141           /* set core clock to 400/200/100 MHz */
-
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
-
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE               (128*1024)      /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ   (4*1024)        /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ   (4*1024)        /* FIQ stack */
-#endif
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS           1               /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1                   0xa0000000      /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE              0x04000000      /* 64 MB */
-
-#define PHYS_FLASH_1                   0x00000000      /* Flash Bank #1 */
-#define PHYS_FLASH_2                   0x04000000      /* Flash Bank #2 */
-#define PHYS_FLASH_SIZE                        0x02000000      /* 32 MB */
-#define PHYS_FLASH_BANK_SIZE           0x02000000      /* 32 MB Banks */
-#define PHYS_FLASH_SECT_SIZE           0x00040000      /* 256 KB sectors (x2) */
-
-#define CONFIG_SYS_DRAM_BASE                   0xa0000000
-#define CONFIG_SYS_DRAM_SIZE                   0x04000000
-
-#define CONFIG_SYS_FLASH_BASE                  PHYS_FLASH_1
-
-#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
-#define        CONFIG_SYS_INIT_SP_ADDR         (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1)
-
-/*
- * GPIO settings
- */
-
-
-#define CONFIG_SYS_GPSR0_VAL           0x00408030
-#define CONFIG_SYS_GPSR1_VAL           0x00BFA882
-#define CONFIG_SYS_GPSR2_VAL           0x0001C000
-#define CONFIG_SYS_GPCR0_VAL           0xC0031100
-#define CONFIG_SYS_GPCR1_VAL           0xFC400300
-#define CONFIG_SYS_GPCR2_VAL           0x00003FFF
-#define CONFIG_SYS_GPDR0_VAL           0xC0439330
-#define CONFIG_SYS_GPDR1_VAL           0xFCFFAB82
-#define CONFIG_SYS_GPDR2_VAL           0x0001FFFF
-#define CONFIG_SYS_GAFR0_L_VAL         0x80000000
-#define CONFIG_SYS_GAFR0_U_VAL         0xA5000010
-#define CONFIG_SYS_GAFR1_L_VAL         0x60008018
-#define CONFIG_SYS_GAFR1_U_VAL         0xAAA5AAAA
-#define CONFIG_SYS_GAFR2_L_VAL         0xAAA0000A
-#define CONFIG_SYS_GAFR2_U_VAL         0x00000002
-
-#define CONFIG_SYS_PSSR_VAL            0x20
-
-#define        CONFIG_SYS_CCCR                 CCCR_L27|CCCR_M2|CCCR_N10
-#define        CONFIG_SYS_CKEN                 0x0
-
-/*
- * Memory settings
- */
-#define CONFIG_SYS_MSC0_VAL            0x12447FF0
-#define CONFIG_SYS_MSC1_VAL            0x12BC5554
-#define CONFIG_SYS_MSC2_VAL            0x7FF97FF1
-#define CONFIG_SYS_MDCNFG_VAL          0x00001AC9
-#define CONFIG_SYS_MDREFR_VAL          0x03CDC017
-#define CONFIG_SYS_MDMRS_VAL           0x00000000
-#define        CONFIG_SYS_FLYCNFG_VAL          0x00000000
-#define        CONFIG_SYS_SXCNFG_VAL           0x00000000
-
-/*
- * PCMCIA and CF Interfaces
- */
-#define CONFIG_SYS_MECR_VAL            0x00000000
-#define CONFIG_SYS_MCMEM0_VAL          0x00010504
-#define CONFIG_SYS_MCMEM1_VAL          0x00010504
-#define CONFIG_SYS_MCATT0_VAL          0x00010504
-#define CONFIG_SYS_MCATT1_VAL          0x00010504
-#define CONFIG_SYS_MCIO0_VAL           0x00004715
-#define CONFIG_SYS_MCIO1_VAL           0x00004715
-
-#define _LED                   0x08000010      /*check this */
-#define LED_BLANK              0x08000040
-#define LED_GPIO               0x10
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS     1       /* max number of memory banks           */
-#define CONFIG_SYS_MAX_FLASH_SECT      128     /* max number of sectors on one chip    */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT    (25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT    (25*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_SYS_MONITOR_LEN         0x40000         /* 256 KiB */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR                (PHYS_FLASH_1 + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_ENV_SIZE                0x40000 /* Total Size of Environment Sector     */
-
-
-#endif /* __CONFIG_H */