mm: remove ptep_establish()
authorMartin Schwidefsky <schwidefsky@de.ibm.com>
Tue, 17 Jul 2007 11:03:03 +0000 (04:03 -0700)
committerLinus Torvalds <torvalds@woody.linux-foundation.org>
Tue, 17 Jul 2007 17:22:59 +0000 (10:22 -0700)
The last user of ptep_establish in mm/ is long gone.  Remove the architecture
primitive as well.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
include/asm-arm/pgtable.h
include/asm-generic/pgtable.h
include/asm-i386/pgtable.h
include/asm-ia64/pgtable.h
include/asm-s390/pgtable.h

index cb4c2c9..d2e8171 100644 (file)
  * means that a write to a clean page will cause a permission fault, and
  * the Linux MM layer will mark the page dirty via handle_pte_fault().
  * For the hardware to notice the permission change, the TLB entry must
- * be flushed, and ptep_establish() does that for us.
+ * be flushed, and ptep_set_access_flags() does that for us.
  *
  * The "accessed" or "young" bit is emulated by a similar method; we only
  * allow accesses to the page if the "young" bit is set.  Accesses to the
  * page will cause a fault, and handle_pte_fault() will set the young bit
  * for us as long as the page is marked present in the corresponding Linux
- * PTE entry.  Again, ptep_establish() will ensure that the TLB is up to
- * date.
+ * PTE entry.  Again, ptep_set_access_flags() will ensure that the TLB is
+ * up to date.
  *
  * However, when the "young" bit is cleared, we deny access to the page
  * by clearing the hardware PTE.  Currently Linux does not flush the TLB
index 7d7bcf9..aa3f120 100644 (file)
@@ -3,25 +3,6 @@
 
 #ifndef __ASSEMBLY__
 
-#ifndef __HAVE_ARCH_PTEP_ESTABLISH
-/*
- * Establish a new mapping:
- *  - flush the old one
- *  - update the page tables
- *  - inform the TLB about the new one
- *
- * We hold the mm semaphore for reading, and the pte lock.
- *
- * Note: the old pte is known to not be writable, so we don't need to
- * worry about dirty bits etc getting lost.
- */
-#define ptep_establish(__vma, __address, __ptep, __entry)              \
-do {                                                                   \
-       set_pte_at((__vma)->vm_mm, (__address), __ptep, __entry);       \
-       flush_tlb_page(__vma, __address);                               \
-} while (0)
-#endif
-
 #ifndef __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
 /*
  * Largely same as above, but only sets the access flags (dirty,
index 01734e0..afb1597 100644 (file)
@@ -311,17 +311,6 @@ static inline pte_t native_local_ptep_get_and_clear(pte_t *ptep)
        __ret;                                                          \
 })
 
-/*
- * Rules for using ptep_establish: the pte MUST be a user pte, and
- * must be a present->present transition.
- */
-#define __HAVE_ARCH_PTEP_ESTABLISH
-#define ptep_establish(vma, address, ptep, pteval)                     \
-do {                                                                   \
-       set_pte_present((vma)->vm_mm, address, ptep, pteval);           \
-       flush_tlb_page(vma, address);                                   \
-} while (0)
-
 #define __HAVE_ARCH_PTEP_CLEAR_DIRTY_FLUSH
 #define ptep_clear_flush_dirty(vma, address, ptep)                     \
 ({                                                                     \
index f923d81..47642e0 100644 (file)
@@ -543,8 +543,10 @@ extern void lazy_mmu_prot_update (pte_t pte);
 # define ptep_set_access_flags(__vma, __addr, __ptep, __entry, __safely_writable) \
 ({                                                                     \
        int __changed = !pte_same(*(__ptep), __entry);                  \
-       if (__changed)                                                  \
-               ptep_establish(__vma, __addr, __ptep, __entry);         \
+       if (__changed) {                                                \
+               set_pte_at((__vma)->vm_mm, (__addr), __ptep, __entry);  \
+               flush_tlb_page(__vma, __addr);                          \
+       }                                                               \
        __changed;                                                      \
 })
 #endif
index 26215a9..1039bf6 100644 (file)
@@ -707,16 +707,19 @@ static inline void __ptep_ipte(unsigned long address, pte_t *ptep)
        pte_val(*ptep) = _PAGE_TYPE_EMPTY;
 }
 
-static inline pte_t
-ptep_clear_flush(struct vm_area_struct *vma,
-                unsigned long address, pte_t *ptep)
+static inline void ptep_invalidate(unsigned long address, pte_t *ptep)
 {
-       pte_t pte = *ptep;
-       pte_t *shadow_pte = get_shadow_pte(ptep);
-
        __ptep_ipte(address, ptep);
-       if (shadow_pte)
-               __ptep_ipte(address, shadow_pte);
+       ptep = get_shadow_pte(ptep);
+       if (ptep)
+               __ptep_ipte(address, ptep);
+}
+
+static inline pte_t ptep_clear_flush(struct vm_area_struct *vma,
+                                    unsigned long address, pte_t *ptep)
+{
+       pte_t pte = *ptep;
+       ptep_invalidate(address, ptep);
        return pte;
 }
 
@@ -726,21 +729,14 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
        set_pte_at(mm, addr, ptep, pte_wrprotect(old_pte));
 }
 
-static inline void
-ptep_establish(struct vm_area_struct *vma, 
-              unsigned long address, pte_t *ptep,
-              pte_t entry)
-{
-       ptep_clear_flush(vma, address, ptep);
-       set_pte(ptep, entry);
-}
-
-#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
-({                                                                       \
-       int __changed = !pte_same(*(__ptep), __entry);                    \
-       if (__changed)                                                    \
-               ptep_establish(__vma, __address, __ptep, __entry);        \
-       __changed;                                                        \
+#define ptep_set_access_flags(__vma, __addr, __ptep, __entry, __dirty) \
+({                                                                     \
+       int __changed = !pte_same(*(__ptep), __entry);                  \
+       if (__changed) {                                                \
+               ptep_invalidate(__addr, __ptep);                        \
+               set_pte_at((__vma)->vm_mm, __addr, __ptep, __entry);    \
+       }                                                               \
+       __changed;                                                      \
 })
 
 /*
@@ -940,7 +936,6 @@ extern int remove_shared_memory(unsigned long start, unsigned long size);
 #define __HAVE_ARCH_MEMMAP_INIT
 extern void memmap_init(unsigned long, int, unsigned long, unsigned long);
 
-#define __HAVE_ARCH_PTEP_ESTABLISH
 #define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
 #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
 #define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH