ARM: dts: am335x-evm/evmsk/icev2: switch to new cpsw switch drv

The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.

So, Switch amam335x-evm, am335x-evmsk and am335x-icev2 boards to use new
cpsw switch driver. Those boards have or 2 Ext. port wired and configured
in dual_mac mode by default, or only 1 Ext. port.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 7c6f2c1..902e295 100644 (file)
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -684,28 +684,31 @@
        };
 };
 
-&mac {
+&mac_sw {
        pinctrl-names = "default", "sleep";
        pinctrl-0 = <&cpsw_default>;
        pinctrl-1 = <&cpsw_sleep>;
        status = "okay";
-       slaves = <1>;
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
        pinctrl-names = "default", "sleep";
        pinctrl-0 = <&davinci_mdio_default>;
        pinctrl-1 = <&davinci_mdio_sleep>;
-       status = "okay";
 
        ethphy0: ethernet-phy@0 {
                reg = <0>;
        };
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
        phy-handle = <&ethphy0>;
        phy-mode = "rgmii-id";
+       ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+        status = "disabled";
 };
 
 &tscadc {

diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index b43b941..d5f8d5e 100644 (file)
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -596,19 +596,17 @@
        };
 };
 
-&mac {
+&mac_sw {
        pinctrl-names = "default", "sleep";
        pinctrl-0 = <&cpsw_default>;
        pinctrl-1 = <&cpsw_sleep>;
-       dual_emac = <1>;
        status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
        pinctrl-names = "default", "sleep";
        pinctrl-0 = <&davinci_mdio_default>;
        pinctrl-1 = <&davinci_mdio_sleep>;
-       status = "okay";
 
        ethphy0: ethernet-phy@0 {
                reg = <0>;
@@ -619,16 +617,16 @@
        };
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
        phy-handle = <&ethphy0>;
        phy-mode = "rgmii-id";
-       dual_emac_res_vlan = <1>;
+       ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
        phy-handle = <&ethphy1>;
        phy-mode = "rgmii-id";
-       dual_emac_res_vlan = <2>;
+       ti,dual-emac-pvid = <2>;
 };
 
 &mmc1 {

diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
index b958ab5..e923d06 100644 (file)
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@@ -474,31 +474,29 @@
        };
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
        phy-handle = <&ethphy0>;
        phy-mode = "rmii";
-       dual_emac_res_vlan = <1>;
+       ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
        phy-handle = <&ethphy1>;
        phy-mode = "rmii";
-       dual_emac_res_vlan = <2>;
+       ti,dual-emac-pvid = <2>;
 };
 
-&mac {
+&mac_sw {
        pinctrl-names = "default", "sleep";
        pinctrl-0 = <&cpsw_default>;
        pinctrl-1 = <&cpsw_sleep>;
        status = "okay";
-       dual_emac;
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
        pinctrl-names = "default", "sleep";
        pinctrl-0 = <&davinci_mdio_default>;
        pinctrl-1 = <&davinci_mdio_sleep>;
-       status = "okay";
        reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
        reset-delay-us = <2>;   /* PHY datasheet states 1uS min */