};
/*
- * clear_interruption clear the pending interrupt.
- * @param: tpm_dev, the tpm device device.
- * @return: the interrupt status value.
+ * clear the pending interrupt.
*/
static u8 clear_interruption(struct st33zp24_dev *tpm_dev)
{
tpm_dev->ops->recv(tpm_dev->phy_id, TPM_INT_STATUS, &interrupt, 1);
tpm_dev->ops->send(tpm_dev->phy_id, TPM_INT_STATUS, &interrupt, 1);
return interrupt;
-} /* clear_interruption() */
+}
/*
- * st33zp24_cancel, cancel the current command execution or
- * set STS to COMMAND READY.
- * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h
+ * cancel the current command execution or set STS to COMMAND READY.
*/
static void st33zp24_cancel(struct tpm_chip *chip)
{
data = TPM_STS_COMMAND_READY;
tpm_dev->ops->send(tpm_dev->phy_id, TPM_STS, &data, 1);
-} /* st33zp24_cancel() */
+}
/*
- * st33zp24_status return the TPM_STS register
- * @param: chip, the tpm chip description
- * @return: the TPM_STS register value.
+ * return the TPM_STS register
*/
static u8 st33zp24_status(struct tpm_chip *chip)
{
tpm_dev->ops->recv(tpm_dev->phy_id, TPM_STS, &data, 1);
return data;
-} /* st33zp24_status() */
+}
/*
- * check_locality if the locality is active
- * @param: chip, the tpm chip description
- * @return: true if LOCALITY0 is active, otherwise false
+ * if the locality is active
*/
static bool check_locality(struct tpm_chip *chip)
{
return true;
return false;
-} /* check_locality() */
+}
-/*
- * request_locality request the TPM locality
- * @param: chip, the chip description
- * @return: the active locality or negative value.
- */
static int request_locality(struct tpm_chip *chip)
{
struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev);
/* could not get locality */
return -EACCES;
-} /* request_locality() */
+}
-/*
- * release_locality release the active locality
- * @param: chip, the tpm chip description.
- */
static void release_locality(struct tpm_chip *chip)
{
struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev);
/*
* get_burstcount return the burstcount value
- * @param: chip, the chip description
- * return: the burstcount or negative value.
*/
static int get_burstcount(struct tpm_chip *chip)
{
msleep(TPM_TIMEOUT);
} while (time_before(jiffies, stop));
return -EBUSY;
-} /* get_burstcount() */
-
+}
-/*
- * wait_for_tpm_stat_cond
- * @param: chip, chip description
- * @param: mask, expected mask value
- * @param: check_cancel, does the command expected to be canceled ?
- * @param: canceled, did we received a cancel request ?
- * @return: true if status == mask or if the command is canceled.
- * false in other cases.
- */
static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask,
bool check_cancel, bool *canceled)
{
}
/*
- * wait_for_stat wait for a TPM_STS value
- * @param: chip, the tpm chip description
- * @param: mask, the value mask to wait
- * @param: timeout, the timeout
- * @param: queue, the wait queue.
- * @param: check_cancel, does the command can be cancelled ?
- * @return: the tpm status, 0 if success, -ETIME if timeout is reached.
+ * wait for a TPM_STS value
*/
static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout,
wait_queue_head_t *queue, bool check_cancel)
}
return -ETIME;
-} /* wait_for_stat() */
+}
-/*
- * recv_data receive data
- * @param: chip, the tpm chip description
- * @param: buf, the buffer where the data are received
- * @param: count, the number of data to receive
- * @return: the number of bytes read from TPM FIFO.
- */
static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count)
{
struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev);
return size;
}
-/*
- * tpm_ioserirq_handler the serirq irq handler
- * @param: irq, the tpm chip description
- * @param: dev_id, the description of the chip
- * @return: the status of the handler.
- */
static irqreturn_t tpm_ioserirq_handler(int irq, void *dev_id)
{
struct tpm_chip *chip = dev_id;
disable_irq_nosync(tpm_dev->irq);
return IRQ_HANDLED;
-} /* tpm_ioserirq_handler() */
+}
/*
- * st33zp24_send send TPM commands through the I2C bus.
- *
- * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h
- * @param: buf, the buffer to send.
- * @param: count, the number of bytes to send.
- * @return: In case of success the number of bytes sent.
- * In other case, a < 0 value describing the issue.
+ * send TPM commands through the I2C bus.
*/
static int st33zp24_send(struct tpm_chip *chip, unsigned char *buf,
size_t len)
return ret;
}
-/*
- * st33zp24_recv received TPM response through TPM phy.
- * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h.
- * @param: buf, the buffer to store datas.
- * @param: count, the number of bytes to send.
- * @return: In case of success the number of bytes received.
- * In other case, a < 0 value describing the issue.
- */
static int st33zp24_recv(struct tpm_chip *chip, unsigned char *buf,
size_t count)
{
return size;
}
-/*
- * st33zp24_req_canceled
- * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h.
- * @param: status, the TPM status.
- * @return: Does TPM ready to compute a new command ? true.
- */
static bool st33zp24_req_canceled(struct tpm_chip *chip, u8 status)
{
return (status == TPM_STS_COMMAND_READY);
};
/*
- * st33zp24_probe initialize the TPM device
- * @param: client, the i2c_client description (TPM I2C description).
- * @param: id, the i2c_device_id struct.
- * @return: 0 in case of success.
- * -1 in other case.
+ * initialize the TPM device
*/
int st33zp24_probe(void *phy_id, const struct st33zp24_phy_ops *ops,
struct device *dev, int irq, int io_lpcpd)
}
EXPORT_SYMBOL(st33zp24_probe);
-/*
- * st33zp24_remove remove the TPM device
- * @param: tpm_data, the tpm phy.
- * @return: 0 in case of success.
- */
int st33zp24_remove(struct tpm_chip *chip)
{
tpm_chip_unregister(chip);
EXPORT_SYMBOL(st33zp24_remove);
#ifdef CONFIG_PM_SLEEP
-/*
- * st33zp24_pm_suspend suspend the TPM device
- * @param: tpm_data, the tpm phy.
- * @param: mesg, the power management message.
- * @return: 0 in case of success.
- */
int st33zp24_pm_suspend(struct device *dev)
{
struct tpm_chip *chip = dev_get_drvdata(dev);
ret = tpm_pm_suspend(dev);
return ret;
-} /* st33zp24_pm_suspend() */
+}
EXPORT_SYMBOL(st33zp24_pm_suspend);
-/*
- * st33zp24_pm_resume resume the TPM device
- * @param: tpm_data, the tpm phy.
- * @return: 0 in case of success.
- */
int st33zp24_pm_resume(struct device *dev)
{
struct tpm_chip *chip = dev_get_drvdata(dev);
tpm1_do_selftest(chip);
}
return ret;
-} /* st33zp24_pm_resume() */
+}
EXPORT_SYMBOL(st33zp24_pm_resume);
#endif
projects / platform / kernel / linux-starfive.git / commitdiff