--- /dev/null
+/*
+ * Nano River Technologies viperboard driver
+ *
+ * This is the core driver for the viperboard. There are cell drivers
+ * available for I2C, ADC and both GPIOs. SPI is not yet supported.
+ * The drivers do not support all features the board exposes. See user
+ * manual of the viperboard.
+ *
+ * (C) 2012 by Lemonage GmbH
+ * Author: Lars Poeschel <poeschel@lemonage.de>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+
+#include <linux/mfd/core.h>
+#include <linux/mfd/viperboard.h>
+
+#include <linux/usb.h>
+
+
+static const struct usb_device_id vprbrd_table[] = {
+ { USB_DEVICE(0x2058, 0x1005) }, /* Nano River Technologies */
+ { } /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, vprbrd_table);
+
+static struct mfd_cell vprbrd_devs[] = {
+};
+
+static int vprbrd_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ struct vprbrd *vb;
+
+ u16 version = 0;
+ int pipe, ret;
+ unsigned char buf[1];
+
+ /* allocate memory for our device state and initialize it */
+ vb = kzalloc(sizeof(*vb), GFP_KERNEL);
+ if (vb == NULL) {
+ dev_err(&interface->dev, "Out of memory\n");
+ return -ENOMEM;
+ }
+
+ mutex_init(&vb->lock);
+
+ vb->usb_dev = usb_get_dev(interface_to_usbdev(interface));
+
+ /* save our data pointer in this interface device */
+ usb_set_intfdata(interface, vb);
+ dev_set_drvdata(&vb->pdev.dev, vb);
+
+ /* get version information, major first, minor then */
+ pipe = usb_rcvctrlpipe(vb->usb_dev, 0);
+ ret = usb_control_msg(vb->usb_dev, pipe, VPRBRD_USB_REQUEST_MAJOR,
+ VPRBRD_USB_TYPE_IN, 0x0000, 0x0000, buf, 1,
+ VPRBRD_USB_TIMEOUT_MS);
+ if (ret == 1)
+ version = buf[0];
+
+ ret = usb_control_msg(vb->usb_dev, pipe, VPRBRD_USB_REQUEST_MINOR,
+ VPRBRD_USB_TYPE_IN, 0x0000, 0x0000, buf, 1,
+ VPRBRD_USB_TIMEOUT_MS);
+ if (ret == 1) {
+ version <<= 8;
+ version = version | buf[0];
+ }
+
+ dev_info(&interface->dev,
+ "version %x.%02x found at bus %03d address %03d\n",
+ version >> 8, version & 0xff,
+ vb->usb_dev->bus->busnum, vb->usb_dev->devnum);
+
+ ret = mfd_add_devices(&interface->dev, -1, vprbrd_devs,
+ ARRAY_SIZE(vprbrd_devs), NULL, 0, NULL);
+ if (ret != 0) {
+ dev_err(&interface->dev, "Failed to add mfd devices to core.");
+ goto error;
+ }
+
+ return 0;
+
+error:
+ if (vb) {
+ usb_put_dev(vb->usb_dev);
+ kfree(vb);
+ }
+
+ return ret;
+}
+
+static void vprbrd_disconnect(struct usb_interface *interface)
+{
+ struct vprbrd *vb = usb_get_intfdata(interface);
+
+ mfd_remove_devices(&interface->dev);
+ usb_set_intfdata(interface, NULL);
+ usb_put_dev(vb->usb_dev);
+ kfree(vb);
+
+ dev_dbg(&interface->dev, "disconnected\n");
+}
+
+static struct usb_driver vprbrd_driver = {
+ .name = "viperboard",
+ .probe = vprbrd_probe,
+ .disconnect = vprbrd_disconnect,
+ .id_table = vprbrd_table,
+};
+
+module_usb_driver(vprbrd_driver);
+
+MODULE_DESCRIPTION("Nano River Technologies viperboard mfd core driver");
+MODULE_AUTHOR("Lars Poeschel <poeschel@lemonage.de>");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * include/linux/mfd/viperboard.h
+ *
+ * Nano River Technologies viperboard definitions
+ *
+ * (C) 2012 by Lemonage GmbH
+ * Author: Lars Poeschel <poeschel@lemonage.de>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MFD_VIPERBOARD_H__
+#define __MFD_VIPERBOARD_H__
+
+#include <linux/types.h>
+#include <linux/usb.h>
+
+#define VPRBRD_EP_OUT 0x02
+#define VPRBRD_EP_IN 0x86
+
+#define VPRBRD_I2C_MSG_LEN 512 /* max length of a msg on USB level */
+
+#define VPRBRD_I2C_FREQ_6MHZ 1 /* 6 MBit/s */
+#define VPRBRD_I2C_FREQ_3MHZ 2 /* 3 MBit/s */
+#define VPRBRD_I2C_FREQ_1MHZ 3 /* 1 MBit/s */
+#define VPRBRD_I2C_FREQ_FAST 4 /* 400 kbit/s */
+#define VPRBRD_I2C_FREQ_400KHZ VPRBRD_I2C_FREQ_FAST
+#define VPRBRD_I2C_FREQ_200KHZ 5 /* 200 kbit/s */
+#define VPRBRD_I2C_FREQ_STD 6 /* 100 kbit/s */
+#define VPRBRD_I2C_FREQ_100KHZ VPRBRD_I2C_FREQ_STD
+#define VPRBRD_I2C_FREQ_10KHZ 7 /* 10 kbit/s */
+
+#define VPRBRD_I2C_CMD_WRITE 0x00
+#define VPRBRD_I2C_CMD_READ 0x01
+#define VPRBRD_I2C_CMD_ADDR 0x02
+
+#define VPRBRD_USB_TYPE_OUT 0x40
+#define VPRBRD_USB_TYPE_IN 0xc0
+#define VPRBRD_USB_TIMEOUT_MS 100
+#define VPRBRD_USB_REQUEST_MAJOR 0xea
+#define VPRBRD_USB_REQUEST_MINOR 0xeb
+
+struct vprbrd_i2c_write_hdr {
+ u8 cmd;
+ u16 addr;
+ u8 len1;
+ u8 len2;
+ u8 last;
+ u8 chan;
+ u16 spi;
+} __packed;
+
+struct vprbrd_i2c_read_hdr {
+ u8 cmd;
+ u16 addr;
+ u8 len0;
+ u8 len1;
+ u8 len2;
+ u8 len3;
+ u8 len4;
+ u8 len5;
+ u16 tf1; /* transfer 1 length */
+ u16 tf2; /* transfer 2 length */
+} __packed;
+
+struct vprbrd_i2c_status {
+ u8 unknown[11];
+ u8 status;
+} __packed;
+
+struct vprbrd_i2c_write_msg {
+ struct vprbrd_i2c_write_hdr header;
+ u8 data[VPRBRD_I2C_MSG_LEN
+ - sizeof(struct vprbrd_i2c_write_hdr)];
+} __packed;
+
+struct vprbrd_i2c_read_msg {
+ struct vprbrd_i2c_read_hdr header;
+ u8 data[VPRBRD_I2C_MSG_LEN
+ - sizeof(struct vprbrd_i2c_read_hdr)];
+} __packed;
+
+struct vprbrd_i2c_addr_msg {
+ u8 cmd;
+ u8 addr;
+ u8 unknown1;
+ u16 len;
+ u8 unknown2;
+ u8 unknown3;
+} __packed;
+
+/* Structure to hold all device specific stuff */
+struct vprbrd {
+ struct usb_device *usb_dev; /* the usb device for this device */
+ struct mutex lock;
+ u8 buf[sizeof(struct vprbrd_i2c_write_msg)];
+ struct platform_device pdev;
+};
+
+#endif /* __MFD_VIPERBOARD_H__ */
projects / profile / ivi / kernel-x86-ivi.git / commitdiff