#define __KVM_HAVE_ARCH_INTC_INITIALIZED
-#if defined(CONFIG_KVM_ARM_MAX_VCPUS)
-#define KVM_MAX_VCPUS CONFIG_KVM_ARM_MAX_VCPUS
-#else
-#define KVM_MAX_VCPUS 0
-#endif
-
#define KVM_USER_MEM_SLOTS 32
#define KVM_PRIVATE_MEM_SLOTS 4
#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
#include <kvm/arm_vgic.h>
+#define KVM_MAX_VCPUS VGIC_V2_MAX_CPUS
+
u32 *kvm_vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num, u32 mode);
int __attribute_const__ kvm_target_cpu(void);
int kvm_reset_vcpu(struct kvm_vcpu *vcpu);
---help---
Provides host support for ARM processors.
-config KVM_ARM_MAX_VCPUS
- int "Number maximum supported virtual CPUs per VM"
- depends on KVM_ARM_HOST
- default 4
- help
- Static number of max supported virtual CPUs per VM.
-
- If you choose a high number, the vcpu structures will be quite
- large, so only choose a reasonable number that you expect to
- actually use.
-
endif # VIRTUALIZATION
* Map the VGIC hardware resources before running a vcpu the first
* time on this VM.
*/
- if (unlikely(!vgic_ready(kvm))) {
+ if (unlikely(irqchip_in_kernel(kvm) && !vgic_ready(kvm))) {
ret = kvm_vgic_map_resources(kvm);
if (ret)
return ret;
mrc p15, 0, r2, c14, c3, 1 @ CNTV_CTL
str r2, [vcpu, #VCPU_TIMER_CNTV_CTL]
- bic r2, #1 @ Clear ENABLE
- mcr p15, 0, r2, c14, c3, 1 @ CNTV_CTL
+
isb
mrrc p15, 3, rr_lo_hi(r2, r3), c14 @ CNTV_CVAL
mcrr p15, 4, r2, r2, c14 @ CNTVOFF
1:
+ mov r2, #0 @ Clear ENABLE
+ mcr p15, 0, r2, c14, c3, 1 @ CNTV_CTL
+
@ Allow physical timer/counter access for the host
mrc p15, 4, r2, c14, c1, 0 @ CNTHCTL
orr r2, r2, #(CNTHCTL_PL1PCEN | CNTHCTL_PL1PCTEN)
if (vma->vm_flags & VM_PFNMAP) {
gpa_t gpa = mem->guest_phys_addr +
(vm_start - mem->userspace_addr);
- phys_addr_t pa = (vma->vm_pgoff << PAGE_SHIFT) +
- vm_start - vma->vm_start;
+ phys_addr_t pa;
+
+ pa = (phys_addr_t)vma->vm_pgoff << PAGE_SHIFT;
+ pa += vm_start - vma->vm_start;
/* IO region dirty page logging not allowed */
if (memslot->flags & KVM_MEM_LOG_DIRTY_PAGES)
#define VTTBR_VMID_MASK (UL(0xFF) << VTTBR_VMID_SHIFT)
/* Hyp System Trap Register */
-#define HSTR_EL2_TTEE (1 << 16)
#define HSTR_EL2_T(x) (1 << x)
/* Hyp Coproccessor Trap Register Shifts */
#define IFSR32_EL2 25 /* Instruction Fault Status Register */
#define FPEXC32_EL2 26 /* Floating-Point Exception Control Register */
#define DBGVCR32_EL2 27 /* Debug Vector Catch Register */
-#define TEECR32_EL1 28 /* ThumbEE Configuration Register */
-#define TEEHBR32_EL1 29 /* ThumbEE Handler Base Register */
-#define NR_SYS_REGS 30
+#define NR_SYS_REGS 28
/* 32bit mapping */
#define c0_MPIDR (MPIDR_EL1 * 2) /* MultiProcessor ID Register */
#define __KVM_HAVE_ARCH_INTC_INITIALIZED
-#if defined(CONFIG_KVM_ARM_MAX_VCPUS)
-#define KVM_MAX_VCPUS CONFIG_KVM_ARM_MAX_VCPUS
-#else
-#define KVM_MAX_VCPUS 0
-#endif
-
#define KVM_USER_MEM_SLOTS 32
#define KVM_PRIVATE_MEM_SLOTS 4
#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
#include <kvm/arm_vgic.h>
#include <kvm/arm_arch_timer.h>
+#define KVM_MAX_VCPUS VGIC_V3_MAX_CPUS
+
#define KVM_VCPU_MAX_FEATURES 3
int __attribute_const__ kvm_target_cpu(void);
---help---
Provides host support for ARM processors.
-config KVM_ARM_MAX_VCPUS
- int "Number maximum supported virtual CPUs per VM"
- depends on KVM_ARM_HOST
- default 4
- help
- Static number of max supported virtual CPUs per VM.
-
- If you choose a high number, the vcpu structures will be quite
- large, so only choose a reasonable number that you expect to
- actually use.
-
endif # VIRTUALIZATION
mrs x5, ifsr32_el2
stp x4, x5, [x3]
- skip_fpsimd_state x8, 3f
+ skip_fpsimd_state x8, 2f
mrs x6, fpexc32_el2
str x6, [x3, #16]
-3:
- skip_debug_state x8, 2f
+2:
+ skip_debug_state x8, 1f
mrs x7, dbgvcr32_el2
str x7, [x3, #24]
-2:
- skip_tee_state x8, 1f
-
- add x3, x2, #CPU_SYSREG_OFFSET(TEECR32_EL1)
- mrs x4, teecr32_el1
- mrs x5, teehbr32_el1
- stp x4, x5, [x3]
1:
.endm
msr dacr32_el2, x4
msr ifsr32_el2, x5
- skip_debug_state x8, 2f
+ skip_debug_state x8, 1f
ldr x7, [x3, #24]
msr dbgvcr32_el2, x7
-2:
- skip_tee_state x8, 1f
-
- add x3, x2, #CPU_SYSREG_OFFSET(TEECR32_EL1)
- ldp x4, x5, [x3]
- msr teecr32_el1, x4
- msr teehbr32_el1, x5
1:
.endm
mrs x3, cntv_ctl_el0
and x3, x3, #3
str w3, [x0, #VCPU_TIMER_CNTV_CTL]
- bic x3, x3, #1 // Clear Enable
- msr cntv_ctl_el0, x3
isb
str x3, [x0, #VCPU_TIMER_CNTV_CVAL]
1:
+ // Disable the virtual timer
+ msr cntv_ctl_el0, xzr
+
// Allow physical timer/counter access for the host
mrs x2, cnthctl_el2
orr x2, x2, #3
// Guest context
add x2, x0, #VCPU_CONTEXT
+ // We must restore the 32-bit state before the sysregs, thanks
+ // to Cortex-A57 erratum #852523.
+ restore_guest_32bit_state
bl __restore_sysregs
skip_debug_state x3, 1f
kern_hyp_va x3
bl __restore_debug
1:
- restore_guest_32bit_state
restore_guest_regs
// That's it, no more messing around.
{
__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_bvr[rd->reg];
- if (copy_from_user(uaddr, r, KVM_REG_SIZE(reg->id)) != 0)
+ if (copy_from_user(r, uaddr, KVM_REG_SIZE(reg->id)) != 0)
return -EFAULT;
return 0;
}
{
__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_bcr[rd->reg];
- if (copy_from_user(uaddr, r, KVM_REG_SIZE(reg->id)) != 0)
+ if (copy_from_user(r, uaddr, KVM_REG_SIZE(reg->id)) != 0)
return -EFAULT;
return 0;
{
__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_wvr[rd->reg];
- if (copy_from_user(uaddr, r, KVM_REG_SIZE(reg->id)) != 0)
+ if (copy_from_user(r, uaddr, KVM_REG_SIZE(reg->id)) != 0)
return -EFAULT;
return 0;
}
{
__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_wcr[rd->reg];
- if (copy_from_user(uaddr, r, KVM_REG_SIZE(reg->id)) != 0)
+ if (copy_from_user(r, uaddr, KVM_REG_SIZE(reg->id)) != 0)
return -EFAULT;
return 0;
}
{ Op0(0b10), Op1(0b000), CRn(0b0111), CRm(0b1110), Op2(0b110),
trap_dbgauthstatus_el1 },
- /* TEECR32_EL1 */
- { Op0(0b10), Op1(0b010), CRn(0b0000), CRm(0b0000), Op2(0b000),
- NULL, reset_val, TEECR32_EL1, 0 },
- /* TEEHBR32_EL1 */
- { Op0(0b10), Op1(0b010), CRn(0b0001), CRm(0b0000), Op2(0b000),
- NULL, reset_val, TEEHBR32_EL1, 0 },
-
/* MDCCSR_EL1 */
{ Op0(0b10), Op1(0b011), CRn(0b0000), CRm(0b0001), Op2(0b000),
trap_raz_wi },
#define VGIC_V3_MAX_LRS 16
#define VGIC_MAX_IRQS 1024
#define VGIC_V2_MAX_CPUS 8
-
-/* Sanity checks... */
-#if (KVM_MAX_VCPUS > 255)
-#error Too many KVM VCPUs, the VGIC only supports up to 255 VCPUs for now
-#endif
+#define VGIC_V3_MAX_CPUS 255
#if (VGIC_NR_IRQS_LEGACY & 31)
#error "VGIC_NR_IRQS must be a multiple of 32"
vgic->vctrl_base = NULL;
vgic->type = VGIC_V3;
- vgic->max_gic_vcpus = KVM_MAX_VCPUS;
+ vgic->max_gic_vcpus = VGIC_V3_MAX_CPUS;
kvm_info("%s@%llx IRQ%d\n", vgic_node->name,
vcpu_res.start, vgic->maint_irq);