Force vop output mode on encoder driver seem not a good idea,
EDP, HDMI, DisplayPort all have 10bit input on rk3399,
On non-10bit vop, vop 8bit output bit[0-7] connect to the
encoder high 8bit [2-9].
So force RGB10 to RGB888 on vop driver would be better.
And another problem, EDP check crtc id on atomic_check,
but encoder maybe NULL, so out_mode configure would fail,
it cause edp no display.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1495885416-22216-1-git-send-email-mark.yao@rock-chips.com
struct drm_connector_state *conn_state)
{
struct rockchip_crtc_state *s = to_rockchip_crtc_state(crtc_state);
- struct rockchip_dp_device *dp = to_dp(encoder);
- int ret;
/*
* The hardware IC designed that VOP must output the RGB10 video
s->output_mode = ROCKCHIP_OUT_MODE_AAAA;
s->output_type = DRM_MODE_CONNECTOR_eDP;
- if (dp->data->chip_type == RK3399_EDP) {
- /*
- * For RK3399, VOP Lit must code the out mode to RGB888,
- * VOP Big must code the out mode to RGB10.
- */
- ret = drm_of_encoder_active_endpoint_id(dp->dev->of_node,
- encoder);
- if (ret > 0)
- s->output_mode = ROCKCHIP_OUT_MODE_P888;
- }
return 0;
}
{
struct cdn_dp_device *dp = encoder_to_dp(encoder);
int ret, val;
- struct rockchip_crtc_state *state;
ret = drm_of_encoder_active_endpoint_id(dp->dev->of_node, encoder);
if (ret < 0) {
DRM_DEV_DEBUG_KMS(dp->dev, "vop %s output to cdn-dp\n",
(ret) ? "LIT" : "BIG");
- state = to_rockchip_crtc_state(encoder->crtc->state);
- if (ret) {
+ if (ret)
val = DP_SEL_VOP_LIT | (DP_SEL_VOP_LIT << 16);
- state->output_mode = ROCKCHIP_OUT_MODE_P888;
- } else {
+ else
val = DP_SEL_VOP_LIT << 16;
- state->output_mode = ROCKCHIP_OUT_MODE_AAAA;
- }
ret = cdn_dp_grf_write(dp, GRF_SOC_CON9, val);
if (ret)
static void vop_crtc_enable(struct drm_crtc *crtc)
{
struct vop *vop = to_vop(crtc);
+ const struct vop_data *vop_data = vop->data;
struct rockchip_crtc_state *s = to_rockchip_crtc_state(crtc->state);
struct drm_display_mode *adjusted_mode = &crtc->state->adjusted_mode;
u16 hsync_len = adjusted_mode->hsync_end - adjusted_mode->hsync_start;
DRM_DEV_ERROR(vop->dev, "unsupported connector_type [%d]\n",
s->output_type);
}
+
+ /*
+ * if vop is not support RGB10 output, need force RGB10 to RGB888.
+ */
+ if (s->output_mode == ROCKCHIP_OUT_MODE_AAAA &&
+ !(vop_data->feature & VOP_FEATURE_OUTPUT_RGB10))
+ s->output_mode = ROCKCHIP_OUT_MODE_P888;
VOP_CTRL_SET(vop, out_mode, s->output_mode);
VOP_CTRL_SET(vop, htotal_pw, (htotal << 16) | hsync_len);
const struct vop_intr *intr;
const struct vop_win_data *win;
unsigned int win_size;
+
+#define VOP_FEATURE_OUTPUT_RGB10 BIT(0)
+ u64 feature;
};
/* interrupt define */
static const struct vop_data rk3288_vop = {
.init_table = rk3288_init_reg_table,
.table_size = ARRAY_SIZE(rk3288_init_reg_table),
+ .feature = VOP_FEATURE_OUTPUT_RGB10,
.intr = &rk3288_vop_intr,
.ctrl = &rk3288_ctrl_data,
.win = rk3288_vop_win_data,
static const struct vop_data rk3399_vop_big = {
.init_table = rk3399_init_reg_table,
.table_size = ARRAY_SIZE(rk3399_init_reg_table),
+ .feature = VOP_FEATURE_OUTPUT_RGB10,
.intr = &rk3399_vop_intr,
.ctrl = &rk3399_ctrl_data,
/*