snd-hda-codec-hdmi-objs := patch_hdmi.o hda_eld.o
# side codecs
-snd-hda-scodec-cs35l41-objs := cs35l41_hda.o
+snd-hda-scodec-cs35l41-objs := cs35l41_hda.o cs35l41_hda_property.o
snd-hda-scodec-cs35l41-i2c-objs := cs35l41_hda_i2c.o
snd-hda-scodec-cs35l41-spi-objs := cs35l41_hda_spi.o
snd-hda-scodec-cs35l56-objs := cs35l56_hda.o
#include "hda_component.h"
#include "cs35l41_hda.h"
#include "hda_cs_dsp_ctl.h"
+#include "cs35l41_hda_property.h"
#define CS35L41_FIRMWARE_ROOT "cirrus/"
#define CS35L41_PART "cs35l41"
return cs35l41_hda_channel_map(cs35l41->dev, 0, NULL, 1, &hw_cfg->spk_pos);
}
-static int cs35l41_get_speaker_id(struct device *dev, int amp_index,
- int num_amps, int fixed_gpio_id)
+int cs35l41_get_speaker_id(struct device *dev, int amp_index, int num_amps, int fixed_gpio_id)
{
struct gpio_desc *speaker_id_desc;
int speaker_id = -ENODEV;
return speaker_id;
}
-/*
- * Device CLSA010(0/1) doesn't have _DSD so a gpiod_get by the label reset won't work.
- * And devices created by serial-multi-instantiate don't have their device struct
- * pointing to the correct fwnode, so acpi_dev must be used here.
- * And devm functions expect that the device requesting the resource has the correct
- * fwnode.
- */
-static int cs35l41_no_acpi_dsd(struct cs35l41_hda *cs35l41, struct device *physdev, int id,
- const char *hid)
-{
- struct cs35l41_hw_cfg *hw_cfg = &cs35l41->hw_cfg;
-
- /* check I2C address to assign the index */
- cs35l41->index = id == 0x40 ? 0 : 1;
- cs35l41->channel_index = 0;
- cs35l41->reset_gpio = gpiod_get_index(physdev, NULL, 0, GPIOD_OUT_HIGH);
- cs35l41->speaker_id = cs35l41_get_speaker_id(physdev, 0, 0, 2);
- hw_cfg->spk_pos = cs35l41->index;
- hw_cfg->gpio2.func = CS35L41_INTERRUPT;
- hw_cfg->gpio2.valid = true;
- hw_cfg->valid = true;
-
- if (strncmp(hid, "CLSA0100", 8) == 0) {
- hw_cfg->bst_type = CS35L41_EXT_BOOST_NO_VSPK_SWITCH;
- } else if (strncmp(hid, "CLSA0101", 8) == 0) {
- hw_cfg->bst_type = CS35L41_EXT_BOOST;
- hw_cfg->gpio1.func = CS35l41_VSPK_SWITCH;
- hw_cfg->gpio1.valid = true;
- } else {
- /*
- * Note: CLSA010(0/1) are special cases which use a slightly different design.
- * All other HIDs e.g. CSC3551 require valid ACPI _DSD properties to be supported.
- */
- dev_err(cs35l41->dev, "Error: ACPI _DSD Properties are missing for HID %s.\n", hid);
- hw_cfg->valid = false;
- hw_cfg->gpio1.valid = false;
- hw_cfg->gpio2.valid = false;
- return -EINVAL;
- }
-
- return 0;
-}
-
static int cs35l41_hda_read_acpi(struct cs35l41_hda *cs35l41, const char *hid, int id)
{
struct cs35l41_hw_cfg *hw_cfg = &cs35l41->hw_cfg;
sub = NULL;
cs35l41->acpi_subsystem_id = sub;
+ ret = cs35l41_add_dsd_properties(cs35l41, physdev, id, hid);
+ if (!ret) {
+ dev_info(cs35l41->dev, "Using extra _DSD properties, bypassing _DSD in ACPI\n");
+ goto put_physdev;
+ }
+
property = "cirrus,dev-index";
ret = device_property_count_u32(physdev, property);
- if (ret <= 0) {
- ret = cs35l41_no_acpi_dsd(cs35l41, physdev, id, hid);
- goto err_put_physdev;
- }
+ if (ret <= 0)
+ goto err;
+
if (ret > ARRAY_SIZE(values)) {
ret = -EINVAL;
goto err;
err:
dev_err(cs35l41->dev, "Failed property %s: %d\n", property, ret);
-err_put_physdev:
+ hw_cfg->valid = false;
+ hw_cfg->gpio1.valid = false;
+ hw_cfg->gpio2.valid = false;
+put_physdev:
put_device(physdev);
return ret;
int cs35l41_hda_probe(struct device *dev, const char *device_name, int id, int irq,
struct regmap *regmap);
void cs35l41_hda_remove(struct device *dev);
+int cs35l41_get_speaker_id(struct device *dev, int amp_index, int num_amps, int fixed_gpio_id);
#endif /*__CS35L41_HDA_H__*/
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// CS35L41 ALSA HDA Property driver
+//
+// Copyright 2023 Cirrus Logic, Inc.
+//
+// Author: Stefan Binding <sbinding@opensource.cirrus.com>
+
+#include <linux/gpio/consumer.h>
+#include <linux/string.h>
+#include "cs35l41_hda_property.h"
+
+/*
+ * Device CLSA010(0/1) doesn't have _DSD so a gpiod_get by the label reset won't work.
+ * And devices created by serial-multi-instantiate don't have their device struct
+ * pointing to the correct fwnode, so acpi_dev must be used here.
+ * And devm functions expect that the device requesting the resource has the correct
+ * fwnode.
+ */
+static int lenovo_legion_no_acpi(struct cs35l41_hda *cs35l41, struct device *physdev, int id,
+ const char *hid)
+{
+ struct cs35l41_hw_cfg *hw_cfg = &cs35l41->hw_cfg;
+
+ /* check I2C address to assign the index */
+ cs35l41->index = id == 0x40 ? 0 : 1;
+ cs35l41->channel_index = 0;
+ cs35l41->reset_gpio = gpiod_get_index(physdev, NULL, 0, GPIOD_OUT_HIGH);
+ cs35l41->speaker_id = cs35l41_get_speaker_id(physdev, 0, 0, 2);
+ hw_cfg->spk_pos = cs35l41->index;
+ hw_cfg->gpio2.func = CS35L41_INTERRUPT;
+ hw_cfg->gpio2.valid = true;
+ hw_cfg->valid = true;
+
+ if (strcmp(hid, "CLSA0100") == 0) {
+ hw_cfg->bst_type = CS35L41_EXT_BOOST_NO_VSPK_SWITCH;
+ } else if (strcmp(hid, "CLSA0101") == 0) {
+ hw_cfg->bst_type = CS35L41_EXT_BOOST;
+ hw_cfg->gpio1.func = CS35l41_VSPK_SWITCH;
+ hw_cfg->gpio1.valid = true;
+ }
+
+ return 0;
+}
+
+struct cs35l41_prop_model {
+ const char *hid;
+ const char *ssid;
+ int (*add_prop)(struct cs35l41_hda *cs35l41, struct device *physdev, int id,
+ const char *hid);
+};
+
+const struct cs35l41_prop_model cs35l41_prop_model_table[] = {
+ { "CLSA0100", NULL, lenovo_legion_no_acpi },
+ { "CLSA0101", NULL, lenovo_legion_no_acpi },
+ {}
+};
+
+int cs35l41_add_dsd_properties(struct cs35l41_hda *cs35l41, struct device *physdev, int id,
+ const char *hid)
+{
+ const struct cs35l41_prop_model *model;
+
+ for (model = cs35l41_prop_model_table; model->hid > 0; model++) {
+ if (!strcmp(model->hid, hid) &&
+ (!model->ssid ||
+ (cs35l41->acpi_subsystem_id &&
+ !strcmp(model->ssid, cs35l41->acpi_subsystem_id))))
+ return model->add_prop(cs35l41, physdev, id, hid);
+ }
+
+ return -ENOENT;
+}
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * CS35L41 ALSA HDA Property driver
+ *
+ * Copyright 2023 Cirrus Logic, Inc.
+ *
+ * Author: Stefan Binding <sbinding@opensource.cirrus.com>
+ */
+
+#ifndef CS35L41_HDA_PROP_H
+#define CS35L41_HDA_PROP_H
+
+#include <linux/device.h>
+#include "cs35l41_hda.h"
+
+int cs35l41_add_dsd_properties(struct cs35l41_hda *cs35l41, struct device *physdev, int id,
+ const char *hid);
+#endif /* CS35L41_HDA_PROP_H */