ARM: dts: omap: Remove "cooling-{min|max}-level" for CPU nodes
authorViresh Kumar <viresh.kumar@linaro.org>
Fri, 9 Feb 2018 08:58:02 +0000 (14:28 +0530)
committerTony Lindgren <tony@atomide.com>
Wed, 14 Feb 2018 17:26:11 +0000 (09:26 -0800)
The "cooling-min-level" and "cooling-max-level" properties are not
parsed by any part of the kernel currently and the max cooling state of
a CPU cooling device is found by referring to the cpufreq table instead.

Remove the unused properties from the CPU nodes.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
arch/arm/boot/dts/dra7.dtsi
arch/arm/boot/dts/omap443x.dtsi
arch/arm/boot/dts/omap4460.dtsi
arch/arm/boot/dts/omap5.dtsi

index e4a420f..f4ddd86 100644 (file)
@@ -92,8 +92,6 @@
                        clock-latency = <300000>; /* From omap-cpufreq driver */
 
                        /* cooling options */
-                       cooling-min-level = <0>;
-                       cooling-max-level = <2>;
                        #cooling-cells = <2>; /* min followed by max */
 
                        vbb-supply = <&abb_mpu>;
index 03c8ad9..cbcdcb4 100644 (file)
@@ -24,8 +24,6 @@
                        clock-latency = <300000>; /* From legacy driver */
 
                        /* cooling options */
-                       cooling-min-level = <0>;
-                       cooling-max-level = <3>;
                        #cooling-cells = <2>; /* min followed by max */
                };
        };
index c43f2a2..ad97493 100644 (file)
@@ -22,8 +22,6 @@
                        clock-latency = <300000>; /* From legacy driver */
 
                        /* cooling options */
-                       cooling-min-level = <0>;
-                       cooling-max-level = <2>;
                        #cooling-cells = <2>; /* min followed by max */
                };
        };
index 35d4298..511606c 100644 (file)
@@ -55,8 +55,6 @@
                        clock-latency = <300000>; /* From omap-cpufreq driver */
 
                        /* cooling options */
-                       cooling-min-level = <0>;
-                       cooling-max-level = <2>;
                        #cooling-cells = <2>; /* min followed by max */
                };
                cpu@1 {