pxe-rtl8139.bin pxe-virtio.bin \
bamboo.dtb petalogix-s3adsp1800.dtb petalogix-ml605.dtb \
multiboot.bin linuxboot.bin \
-s390-zipl.rom
+s390-zipl.rom \
+spapr-rtas.bin
else
BLOBS=
endif
obj-ppc-y += ppc_newworld.o
# IBM pSeries (sPAPR)
ifeq ($(CONFIG_FDT)$(TARGET_PPC64),yy)
-obj-ppc-y += spapr.o spapr_hcall.o spapr_vio.o
+obj-ppc-y += spapr.o spapr_hcall.o spapr_rtas.o spapr_vio.o
obj-ppc-y += spapr_vty.o
endif
# PowerPC 4xx boards
"$softmmu" = yes ; then
roms="optionrom"
fi
-
+if test "$cpu" = "ppc64" ; then
+ roms="$roms spapr-rtas"
+fi
echo "Install prefix $prefix"
echo "BIOS directory `eval echo $datadir`"
#define KERNEL_LOAD_ADDR 0x00000000
#define INITRD_LOAD_ADDR 0x02800000
#define FDT_MAX_SIZE 0x10000
+#define RTAS_MAX_SIZE 0x10000
#define TIMEBASE_FREQ 512000000ULL
target_phys_addr_t initrd_base,
target_phys_addr_t initrd_size,
const char *kernel_cmdline,
+ target_phys_addr_t rtas_addr,
+ target_phys_addr_t rtas_size,
long hash_shift)
{
void *fdt;
exit(1);
}
+ /* RTAS */
+ ret = spapr_rtas_device_tree_setup(fdt, rtas_addr, rtas_size);
+ if (ret < 0) {
+ fprintf(stderr, "Couldn't set up RTAS device tree properties\n");
+ }
+
_FDT((fdt_pack(fdt)));
*fdt_size = fdt_totalsize(fdt);
void *fdt, *htab;
int i;
ram_addr_t ram_offset;
- target_phys_addr_t fdt_addr;
+ target_phys_addr_t fdt_addr, rtas_addr;
uint32_t kernel_base, initrd_base;
- long kernel_size, initrd_size, htab_size;
+ long kernel_size, initrd_size, htab_size, rtas_size;
long pteg_shift = 17;
int fdt_size;
+ char *filename;
spapr = qemu_malloc(sizeof(*spapr));
cpu_ppc_hypercall = emulate_spapr_hypercall;
* 2GB, so that it can be processed with 32-bit code if
* necessary */
fdt_addr = MIN(ram_size, 0x80000000) - FDT_MAX_SIZE;
+ /* RTAS goes just below that */
+ rtas_addr = fdt_addr - RTAS_MAX_SIZE;
/* init CPUs */
if (cpu_model == NULL) {
envs[i]->htab_mask = htab_size - 1;
}
+ filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, "spapr-rtas.bin");
+ rtas_size = load_image_targphys(filename, rtas_addr, ram_size - rtas_addr);
+ if (rtas_size < 0) {
+ hw_error("qemu: could not load LPAR rtas '%s'\n", filename);
+ exit(1);
+ }
+ qemu_free(filename);
+
spapr->vio_bus = spapr_vio_bus_init();
for (i = 0; i < MAX_SERIAL_PORTS; i++) {
/* Prepare the device tree */
fdt = spapr_create_fdt(&fdt_size, ram_size, cpu_model, envs, spapr,
initrd_base, initrd_size, kernel_cmdline,
- pteg_shift + 7);
+ rtas_addr, rtas_size, pteg_shift + 7);
assert(fdt != NULL);
cpu_physical_memory_write(fdt_addr, fdt, fdt_size);
#define H_GET_MPP 0x2D4
#define MAX_HCALL_OPCODE H_GET_MPP
+/* The hcalls above are standardized in PAPR and implemented by pHyp
+ * as well.
+ *
+ * We also need some hcalls which are specific to qemu / KVM-on-POWER.
+ * So far we just need one for H_RTAS, but in future we'll need more
+ * for extensions like virtio. We put those into the 0xf000-0xfffc
+ * range which is reserved by PAPR for "platform-specific" hcalls.
+ */
+#define KVMPPC_HCALL_BASE 0xf000
+#define KVMPPC_H_RTAS (KVMPPC_HCALL_BASE + 0x0)
+#define KVMPPC_HCALL_MAX KVMPPC_H_RTAS
+
extern sPAPREnvironment *spapr;
/*#define DEBUG_SPAPR_HCALLS*/
target_ulong spapr_hypercall(CPUState *env, target_ulong opcode,
target_ulong *args);
+static inline uint32_t rtas_ld(target_ulong phys, int n)
+{
+ return ldl_phys(phys + 4*n);
+}
+
+static inline void rtas_st(target_ulong phys, int n, uint32_t val)
+{
+ stl_phys(phys + 4*n, val);
+}
+
+typedef void (*spapr_rtas_fn)(sPAPREnvironment *spapr, uint32_t token,
+ uint32_t nargs, target_ulong args,
+ uint32_t nret, target_ulong rets);
+void spapr_rtas_register(const char *name, spapr_rtas_fn fn);
+target_ulong spapr_rtas_call(sPAPREnvironment *spapr,
+ uint32_t token, uint32_t nargs, target_ulong args,
+ uint32_t nret, target_ulong rets);
+int spapr_rtas_device_tree_setup(void *fdt, target_phys_addr_t rtas_addr,
+ target_phys_addr_t rtas_size);
+
#endif /* !defined (__HW_SPAPR_H__) */
return H_SUCCESS;
}
-spapr_hcall_fn hypercall_table[(MAX_HCALL_OPCODE / 4) + 1];
+static target_ulong h_rtas(CPUState *env, sPAPREnvironment *spapr,
+ target_ulong opcode, target_ulong *args)
+{
+ target_ulong rtas_r3 = args[0];
+ uint32_t token = ldl_phys(rtas_r3);
+ uint32_t nargs = ldl_phys(rtas_r3 + 4);
+ uint32_t nret = ldl_phys(rtas_r3 + 8);
+
+ return spapr_rtas_call(spapr, token, nargs, rtas_r3 + 12,
+ nret, rtas_r3 + 12 + 4*nargs);
+}
+
+spapr_hcall_fn papr_hypercall_table[(MAX_HCALL_OPCODE / 4) + 1];
+spapr_hcall_fn kvmppc_hypercall_table[KVMPPC_HCALL_MAX - KVMPPC_HCALL_BASE];
void spapr_register_hypercall(target_ulong opcode, spapr_hcall_fn fn)
{
- spapr_hcall_fn old_fn;
+ spapr_hcall_fn *slot;
+
+ if (opcode <= MAX_HCALL_OPCODE) {
+ assert((opcode & 0x3) == 0);
- assert(opcode <= MAX_HCALL_OPCODE);
- assert((opcode & 0x3) == 0);
+ slot = &papr_hypercall_table[opcode / 4];
+ } else {
+ assert((opcode >= KVMPPC_HCALL_BASE) && (opcode <= KVMPPC_HCALL_MAX));
- old_fn = hypercall_table[opcode / 4];
- assert(!old_fn || (fn == old_fn));
+ slot = &kvmppc_hypercall_table[opcode - KVMPPC_HCALL_BASE];
+ }
- hypercall_table[opcode / 4] = fn;
+ assert(!(*slot) || (fn == *slot));
+ *slot = fn;
}
target_ulong spapr_hypercall(CPUState *env, target_ulong opcode,
if ((opcode <= MAX_HCALL_OPCODE)
&& ((opcode & 0x3) == 0)) {
- spapr_hcall_fn fn = hypercall_table[opcode / 4];
+ spapr_hcall_fn fn = papr_hypercall_table[opcode / 4];
+
+ if (fn) {
+ return fn(env, spapr, opcode, args);
+ }
+ } else if ((opcode >= KVMPPC_HCALL_BASE) &&
+ (opcode <= KVMPPC_HCALL_MAX)) {
+ spapr_hcall_fn fn = kvmppc_hypercall_table[opcode - KVMPPC_HCALL_BASE];
if (fn) {
return fn(env, spapr, opcode, args);
spapr_register_hypercall(H_ENTER, h_enter);
spapr_register_hypercall(H_REMOVE, h_remove);
spapr_register_hypercall(H_PROTECT, h_protect);
+
+ /* qemu/KVM-PPC specific hcalls */
+ spapr_register_hypercall(KVMPPC_H_RTAS, h_rtas);
}
device_init(hypercall_init);
--- /dev/null
+/*
+ * QEMU PowerPC pSeries Logical Partition (aka sPAPR) hardware System Emulator
+ *
+ * Hypercall based emulated RTAS
+ *
+ * Copyright (c) 2010-2011 David Gibson, IBM Corporation.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+#include "cpu.h"
+#include "sysemu.h"
+#include "qemu-char.h"
+#include "hw/qdev.h"
+#include "device_tree.h"
+
+#include "hw/spapr.h"
+#include "hw/spapr_vio.h"
+
+#include <libfdt.h>
+
+#define TOKEN_BASE 0x2000
+#define TOKEN_MAX 0x100
+
+static struct rtas_call {
+ const char *name;
+ spapr_rtas_fn fn;
+} rtas_table[TOKEN_MAX];
+
+struct rtas_call *rtas_next = rtas_table;
+
+target_ulong spapr_rtas_call(sPAPREnvironment *spapr,
+ uint32_t token, uint32_t nargs, target_ulong args,
+ uint32_t nret, target_ulong rets)
+{
+ if ((token >= TOKEN_BASE)
+ && ((token - TOKEN_BASE) < TOKEN_MAX)) {
+ struct rtas_call *call = rtas_table + (token - TOKEN_BASE);
+
+ if (call->fn) {
+ call->fn(spapr, token, nargs, args, nret, rets);
+ return H_SUCCESS;
+ }
+ }
+
+ hcall_dprintf("Unknown RTAS token 0x%x\n", token);
+ rtas_st(rets, 0, -3);
+ return H_PARAMETER;
+}
+
+void spapr_rtas_register(const char *name, spapr_rtas_fn fn)
+{
+ assert(rtas_next < (rtas_table + TOKEN_MAX));
+
+ rtas_next->name = name;
+ rtas_next->fn = fn;
+
+ rtas_next++;
+}
+
+int spapr_rtas_device_tree_setup(void *fdt, target_phys_addr_t rtas_addr,
+ target_phys_addr_t rtas_size)
+{
+ int ret;
+ int i;
+
+ ret = fdt_add_mem_rsv(fdt, rtas_addr, rtas_size);
+ if (ret < 0) {
+ fprintf(stderr, "Couldn't add RTAS reserve entry: %s\n",
+ fdt_strerror(ret));
+ return ret;
+ }
+
+ ret = qemu_devtree_setprop_cell(fdt, "/rtas", "linux,rtas-base",
+ rtas_addr);
+ if (ret < 0) {
+ fprintf(stderr, "Couldn't add linux,rtas-base property: %s\n",
+ fdt_strerror(ret));
+ return ret;
+ }
+
+ ret = qemu_devtree_setprop_cell(fdt, "/rtas", "linux,rtas-entry",
+ rtas_addr);
+ if (ret < 0) {
+ fprintf(stderr, "Couldn't add linux,rtas-entry property: %s\n",
+ fdt_strerror(ret));
+ return ret;
+ }
+
+ ret = qemu_devtree_setprop_cell(fdt, "/rtas", "rtas-size",
+ rtas_size);
+ if (ret < 0) {
+ fprintf(stderr, "Couldn't add rtas-size property: %s\n",
+ fdt_strerror(ret));
+ return ret;
+ }
+
+ for (i = 0; i < TOKEN_MAX; i++) {
+ struct rtas_call *call = &rtas_table[i];
+
+ if (!call->fn) {
+ continue;
+ }
+
+ ret = qemu_devtree_setprop_cell(fdt, "/rtas", call->name,
+ i + TOKEN_BASE);
+ if (ret < 0) {
+ fprintf(stderr, "Couldn't add rtas token for %s: %s\n",
+ call->name, fdt_strerror(ret));
+ return ret;
+ }
+
+ }
+ return 0;
+}
--- /dev/null
+all: build-all
+# Dummy command so that make thinks it has done something
+ @true
+
+include ../../config-host.mak
+include $(SRC_PATH)/rules.mak
+
+$(call set-vpath, $(SRC_PATH)/pc-bios/spapr-rtas)
+
+.PHONY : all clean build-all
+
+#CFLAGS += -I$(SRC_PATH)
+#QEMU_CFLAGS = $(CFLAGS)
+
+build-all: spapr-rtas.bin
+
+%.img: %.o
+ $(call quiet-command,$(CC) -nostdlib -o $@ $<," Building $(TARGET_DIR)$@")
+
+%.bin: %.img
+ $(call quiet-command,$(OBJCOPY) -O binary -j .text $< $@," Building $(TARGET_DIR)$@")
+
+clean:
+ rm -f *.o *.d *.img *.bin *~
--- /dev/null
+/*
+ * QEMU PowerPC pSeries Logical Partition (aka sPAPR) hardware System Emulator
+ *
+ * Trivial in-partition RTAS implementation, based on a hypercall
+ *
+ * Copyright (c) 2010,2011 David Gibson, IBM Corporation.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#define KVMPPC_HCALL_BASE 0xf000
+#define KVMPPC_H_RTAS (KVMPPC_HCALL_BASE + 0x0)
+
+.globl _start
+_start:
+ mr 4,3
+ lis 3,KVMPPC_H_RTAS@h
+ ori 3,3,KVMPPC_H_RTAS@l
+ sc 1
+ blr
projects / sdk / emulator / qemu.git / commitdiff