+2014-01-10 Alan Modra <amodra@gmail.com>
+
+ PR ld/14207
+ PR ld/16322
+ PR binutils/16323
+ * elf.c (assign_file_positions_for_load_sections): Revert last change.
+ (assign_file_positions_for_non_load_sections): When setting up
+ PT_GNU_RELRO header, don't require a corresponding PT_LOAD
+ header that completely covers the relro region.
+
2014-01-09 Tristan Gingold <gingold@adacore.com>
* coff-rs6000.c (rs6000coff_vec, pmac_xcoff_vec): use jump
unsigned int alloc;
unsigned int i, j;
bfd_vma header_pad = 0;
- bfd_vma relro_start = 0, relro_end = 0;
if (link_info == NULL
&& !_bfd_elf_map_sections_to_segments (abfd, link_info))
header_pad -= off;
off += header_pad;
- /* Get start and end of PT_GNU_RELRO segment. */
- if (link_info != NULL)
- {
- relro_start = link_info->relro_start;
- relro_end = link_info->relro_end;
- }
- else
- {
- for (m = elf_seg_map (abfd); m != NULL; m = m->next)
- if (m->p_type == PT_GNU_RELRO)
- {
- relro_start = m->p_paddr;
- relro_end = relro_start + m->p_size;
- break;
- }
- }
-
for (m = elf_seg_map (abfd), p = phdrs, j = 0;
m != NULL;
m = m->next, p++, j++)
}
}
- if (relro_start != 0
- && p->p_type == PT_LOAD
- && p->p_vaddr >= relro_start)
- {
- /* If PT_LOAD segment doesn't fit PT_GNU_RELRO segment,
- adjust its p_filesz and p_memsz. */
- if (p->p_vaddr + p->p_filesz < relro_end)
- {
- bfd_vma adjust = relro_end - (p->p_vaddr + p->p_filesz);
- p->p_filesz += adjust;
- off += adjust;
- }
- if (p->p_vaddr + p->p_memsz < relro_end)
- p->p_memsz += relro_end - (p->p_vaddr + p->p_memsz);
- }
-
off -= off_adjust;
/* Check that all sections are in a PT_LOAD segment.
{
if (lp->p_type == PT_LOAD
&& lp->p_vaddr < link_info->relro_end
- && lp->p_vaddr + lp->p_filesz >= link_info->relro_end
&& lm->count != 0
&& lm->sections[0]->vma >= link_info->relro_start)
break;
}
- /* PR ld/14207. If the RELRO segment doesn't fit in the
- LOAD segment, it should be removed. */
BFD_ASSERT (lm != NULL);
}
else
+2014-01-10 Alan Modra <amodra@gmail.com>
+
+ PR ld/14207
+ PR ld/16322
+ PR binutils/16323
+ * ldlang.c (lang_size_sections): Remove unneeded RELRO base
+ adjust. Tidy comments.
+ * ld.texinfo (DATA_SEGMENT_RELRO_END): Correct description.
+
2014-01-10 Hans-Peter Nilsson <hp@axis.com>
* emulparams/crislinux.sh (COMMONPAGESIZE): Define.
@item DATA_SEGMENT_RELRO_END(@var{offset}, @var{exp})
@kindex DATA_SEGMENT_RELRO_END(@var{offset}, @var{exp})
This defines the end of the @code{PT_GNU_RELRO} segment when
-@samp{-z relro} option is used. Second argument is returned.
+@samp{-z relro} option is used.
When @samp{-z relro} option is not present, @code{DATA_SEGMENT_RELRO_END}
does nothing, otherwise @code{DATA_SEGMENT_ALIGN} is padded so that
@var{exp} + @var{offset} is aligned to the most commonly used page
boundary for particular target. If present in the linker script,
it must always come in between @code{DATA_SEGMENT_ALIGN} and
-@code{DATA_SEGMENT_END}.
+@code{DATA_SEGMENT_END}. Evaluates to the second argument plus any
+padding needed at the end of the @code{PT_GNU_RELRO} segment due to
+section alignment.
@smallexample
. = DATA_SEGMENT_RELRO_END(24, .);
&& link_info.relro && expld.dataseg.relro_end)
{
/* If DATA_SEGMENT_ALIGN DATA_SEGMENT_RELRO_END pair was seen, try
- to put expld.dataseg.relro on a (common) page boundary. */
- bfd_vma min_base, old_base, relro_end, maxpage;
+ to put expld.dataseg.relro_end on a (common) page boundary. */
+ bfd_vma min_base, relro_end, maxpage;
expld.dataseg.phase = exp_dataseg_relro_adjust;
maxpage = expld.dataseg.maxpagesize;
/* MIN_BASE is the absolute minimum address we are allowed to start the
read-write segment (byte before will be mapped read-only). */
min_base = (expld.dataseg.min_base + maxpage - 1) & ~(maxpage - 1);
- /* OLD_BASE is the address for a feasible minimum address which will
- still not cause a data overlap inside MAXPAGE causing file offset skip
- by MAXPAGE. */
- old_base = expld.dataseg.base;
expld.dataseg.base += (-expld.dataseg.relro_end
& (expld.dataseg.pagesize - 1));
/* Compute the expected PT_GNU_RELRO segment end. */
if (expld.dataseg.relro_end > relro_end)
{
/* The alignment of sections between DATA_SEGMENT_ALIGN
- and DATA_SEGMENT_RELRO_END caused huge padding to be
- inserted at DATA_SEGMENT_RELRO_END. Try to start a bit lower so
- that the section alignments will fit in. */
+ and DATA_SEGMENT_RELRO_END can cause excessive padding to
+ be inserted at DATA_SEGMENT_RELRO_END. Try to start a
+ bit lower so that the section alignments will fit in. */
asection *sec;
unsigned int max_alignment_power = 0;
if (((bfd_vma) 1 << max_alignment_power) < expld.dataseg.pagesize)
{
- if (expld.dataseg.base - (1 << max_alignment_power) < old_base)
- expld.dataseg.base += expld.dataseg.pagesize;
- /* Properly align base to max_alignment_power. */
+ /* Aligning the adjusted base guarantees the padding
+ between sections won't change. This is better than
+ simply subtracting 1 << max_alignment_power which is
+ what we used to do here. */
expld.dataseg.base &= ~((1 << max_alignment_power) - 1);
lang_reset_memory_regions ();
one_lang_size_sections_pass (relax, check_regions);
+2014-01-10 Alan Modra <amodra@gmail.com>
+
+ * ld-x86-64/pr14207.d: Adjust.
+
2014-01-09 H.J. Lu <hongjiu.lu@intel.com>
* ld-elf/binutils.exp (binutils_test): Check if GNU_RELRO segment
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
LOAD 0x000000 0x0000000000000000 0x0000000000000000 0x0001e0 0x0001e0 R 0x200000
- LOAD 0x000b48 0x0000000000200b48 0x0000000000200b48 0x0004b8 0x000cf8 RW 0x200000
+ LOAD 0x000b48 0x0000000000200b48 0x0000000000200b48 0x0004b0 0x000cf8 RW 0x200000
DYNAMIC 0x000b90 0x0000000000200b90 0x0000000000200b90 0x0001c0 0x0001c0 RW 0x8
GNU_RELRO 0x000b48 0x0000000000200b48 0x0000000000200b48 0x0004b8 0x0004b8 R 0x1
projects / platform / upstream / binutils.git / commitdiff