ixgbe: cleanup ATR filter setup function

This change cleans up the ixgbe_atr filter setup function so that it uses
fewer items from the stack.  Since the code is only applicable to IPv4 w/
TCP it makes sense to just use the pointers based on the headers themselves
instead of copying them to temp variables and then writing those to the
filters.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 584608d..402ab7b 100644 (file)
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -2530,7 +2530,14 @@ void ixgbe_configure_tx_ring(struct ixgbe_adapter *adapter,
        }
 
        /* reinitialize flowdirector state */
-       set_bit(__IXGBE_TX_FDIR_INIT_DONE, &ring->state);
+       if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) &&
+           adapter->atr_sample_rate) {
+               ring->atr_sample_rate = adapter->atr_sample_rate;
+               ring->atr_count = 0;
+               set_bit(__IXGBE_TX_FDIR_INIT_DONE, &ring->state);
+       } else {
+               ring->atr_sample_rate = 0;
+       }
 
        /* enable queue */
        txdctl |= IXGBE_TXDCTL_ENABLE;
@@ -6227,47 +6234,34 @@ static void ixgbe_tx_queue(struct ixgbe_ring *tx_ring,
 }
 
 static void ixgbe_atr(struct ixgbe_adapter *adapter, struct sk_buff *skb,
-                     int queue, u32 tx_flags, __be16 protocol)
+                     u8 queue, u32 tx_flags, __be16 protocol)
 {
        struct ixgbe_atr_input atr_input;
-       struct tcphdr *th;
        struct iphdr *iph = ip_hdr(skb);
        struct ethhdr *eth = (struct ethhdr *)skb->data;
-       u16 vlan_id, src_port, dst_port, flex_bytes;
-       u32 src_ipv4_addr, dst_ipv4_addr;
-       u8 l4type = 0;
+       struct tcphdr *th;
+       u16 vlan_id;
 
-       /* Right now, we support IPv4 only */
-       if (protocol != htons(ETH_P_IP))
+       /* Right now, we support IPv4 w/ TCP only */
+       if (protocol != htons(ETH_P_IP) ||
+           iph->protocol != IPPROTO_TCP)
                return;
-       /* check if we're UDP or TCP */
-       if (iph->protocol == IPPROTO_TCP) {
-               th = tcp_hdr(skb);
-               src_port = th->source;
-               dst_port = th->dest;
-               l4type |= IXGBE_ATR_L4TYPE_TCP;
-               /* l4type IPv4 type is 0, no need to assign */
-       } else {
-               /* Unsupported L4 header, just bail here */
-               return;
-       }
 
        memset(&atr_input, 0, sizeof(struct ixgbe_atr_input));
 
        vlan_id = (tx_flags & IXGBE_TX_FLAGS_VLAN_MASK) >>
                   IXGBE_TX_FLAGS_VLAN_SHIFT;
-       src_ipv4_addr = iph->saddr;
-       dst_ipv4_addr = iph->daddr;
-       flex_bytes = eth->h_proto;
+
+       th = tcp_hdr(skb);
 
        ixgbe_atr_set_vlan_id_82599(&atr_input, vlan_id);
-       ixgbe_atr_set_src_port_82599(&atr_input, dst_port);
-       ixgbe_atr_set_dst_port_82599(&atr_input, src_port);
-       ixgbe_atr_set_flex_byte_82599(&atr_input, flex_bytes);
-       ixgbe_atr_set_l4type_82599(&atr_input, l4type);
+       ixgbe_atr_set_src_port_82599(&atr_input, th->dest);
+       ixgbe_atr_set_dst_port_82599(&atr_input, th->source);
+       ixgbe_atr_set_flex_byte_82599(&atr_input, eth->h_proto);
+       ixgbe_atr_set_l4type_82599(&atr_input, IXGBE_ATR_L4TYPE_TCP);
        /* src and dst are inverted, think how the receiver sees them */
-       ixgbe_atr_set_src_ipv4_82599(&atr_input, dst_ipv4_addr);
-       ixgbe_atr_set_dst_ipv4_82599(&atr_input, src_ipv4_addr);
+       ixgbe_atr_set_src_ipv4_82599(&atr_input, iph->daddr);
+       ixgbe_atr_set_dst_ipv4_82599(&atr_input, iph->saddr);
 
        /* This assumes the Rx queue and Tx queue are bound to the same CPU */
        ixgbe_fdir_add_signature_filter_82599(&adapter->hw, &atr_input, queue);