V4L/DVB (7595): Improve generic support for setting gpio values
authorMauro Carvalho Chehab <mchehab@infradead.org>
Fri, 18 Apr 2008 00:37:31 +0000 (21:37 -0300)
committerMauro Carvalho Chehab <mchehab@infradead.org>
Thu, 24 Apr 2008 17:09:40 +0000 (14:09 -0300)
em28xx based devices with xc3028 may require some specific gpio values.
This patch adds a generic handling for such values.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
drivers/media/video/em28xx/em28xx-cards.c
drivers/media/video/em28xx/em28xx-core.c
drivers/media/video/em28xx/em28xx.h

index bbd75bd..c907d6a 100644 (file)
@@ -194,9 +194,6 @@ struct em28xx_board em28xx_boards[] = {
                        .vmux     = TVP5150_SVIDEO,
                        .amux     = 1,
                } },
-
-               /* gpio's 4, 1, 0 */
-               .analog_gpio = 0x003d2d,
        },
        [EM2880_BOARD_TERRATEC_HYBRID_XS] = {
                .name         = "Terratec Hybrid XS",
@@ -445,73 +442,88 @@ static struct em28xx_hash_table em28xx_i2c_hash[] = {
        {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
 };
 
+int em28xx_tuner_callback(void *ptr, int command, int arg)
+{
+       int rc = 0, i;
+       struct em28xx *dev = ptr;
+       struct gpio_ctl (*gpio_ctl)[MAX_GPIO];
+
+       if (dev->tuner_type != TUNER_XC2028)
+               return 0;
+
+       if (command != XC2028_TUNER_RESET)
+               return 0;
+
+       if (dev->mode == EM28XX_ANALOG_MODE)
+               gpio_ctl = dev->analog_gpio;
+       else
+               gpio_ctl = dev->digital_gpio;
+
+       /* Send GPIO reset sequences specified at board entry */
+       for (i = 0; i < MAX_GPIO; i++) {
+               if (!gpio_ctl[i]->val)
+                       break;
+
+               dev->em28xx_write_regs(dev,
+                                      gpio_ctl[i]->reg,
+                                      &gpio_ctl[i]->val, 1);
+               if (gpio_ctl[i]->t1)
+                       msleep(gpio_ctl[i]->t1);
+
+               if (!gpio_ctl[i]->rst)
+                       continue;
+               dev->em28xx_write_regs(dev,
+                                      gpio_ctl[i]->reg,
+                                      &gpio_ctl[i]->rst, 1);
+               if (gpio_ctl[i]->t2)
+                       msleep(gpio_ctl[i]->t2);
+
+               dev->em28xx_write_regs(dev,
+                                      gpio_ctl[i]->reg,
+                                      &gpio_ctl[i]->val, 1);
+               if (gpio_ctl[i]->t3)
+                       msleep(gpio_ctl[i]->t3);
+       }
+       return rc;
+}
+EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
+
+static void em28xx_set_model(struct em28xx *dev)
+{
+       dev->is_em2800 = em28xx_boards[dev->model].is_em2800;
+       dev->has_msp34xx = em28xx_boards[dev->model].has_msp34xx;
+       dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
+       dev->decoder = em28xx_boards[dev->model].decoder;
+       dev->video_inputs = em28xx_boards[dev->model].vchannels;
+       dev->has_12mhz_i2s = em28xx_boards[dev->model].has_12mhz_i2s;
+       dev->max_range_640_480 = em28xx_boards[dev->model].max_range_640_480;
+       dev->has_dvb = em28xx_boards[dev->model].has_dvb;
+       dev->analog_gpio = &em28xx_boards[dev->model].analog_gpio;
+       dev->digital_gpio = &em28xx_boards[dev->model].digital_gpio;
+}
+
 /* Since em28xx_pre_card_setup() requires a proper dev->model,
  * this won't work for boards with generic PCI IDs
  */
 void em28xx_pre_card_setup(struct em28xx *dev)
 {
+       em28xx_set_model(dev);
+
        /* request some modules */
        switch (dev->model) {
        case EM2880_BOARD_TERRATEC_PRODIGY_XS:
        case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
-       case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950:
        case EM2880_BOARD_TERRATEC_HYBRID_XS:
+       case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950:
                em28xx_write_regs(dev, XCLK_REG, "\x27", 1);
                em28xx_write_regs(dev, I2C_CLK_REG, "\x40", 1);
-               em28xx_write_regs(dev, 0x08, "\xff", 1);
-               em28xx_write_regs(dev, 0x04, "\x00", 1);
-               msleep(100);
-               em28xx_write_regs(dev, 0x04, "\x08", 1);
-               msleep(100);
-               em28xx_write_regs(dev, 0x08, "\xff", 1);
-               msleep(50);
-               em28xx_write_regs(dev, 0x08, "\x2d", 1);
-               msleep(50);
-               em28xx_write_regs(dev, 0x08, "\x3d", 1);
-               break;
        }
-}
-
-static int em28xx_tuner_callback(void *ptr, int command, int arg)
-{
-       int rc = 0;
-       struct em28xx *dev = ptr;
-
-       if (dev->tuner_type != TUNER_XC2028)
-               return 0;
 
-       switch (command) {
-       case XC2028_TUNER_RESET:
-       {
-               /* GPIO and initialization codes for analog TV and radio
-                  This code should be complemented for DTV, since reset
-                  codes are different.
-                */
-
-               dev->em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1);
-               dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x67", 1);
-
-               if (dev->analog_gpio) {
-                       char gpio0 = dev->analog_gpio & 0xff;
-                       char gpio1 = (dev->analog_gpio >> 8) & 0xff;
-                       char gpio4 = dev->analog_gpio >> 24;
-
-                       if (gpio4) {
-                               dev->em28xx_write_regs(dev, 0x04, &gpio4, 1);
-                               msleep(140);
-                       }
-
-                       msleep(6);
-                       dev->em28xx_write_regs(dev, 0x08, &gpio0, 1);
-                       msleep(10);
-                       dev->em28xx_write_regs(dev, 0x08, &gpio1, 1);
-                       msleep(5);
-               }
-
-               break;
-       }
-       }
-       return rc;
+       /* Put xc2028 tuners and demods into a sane state */
+       if (dev->tuner_type == TUNER_XC2028) {
+               dev->mode = EM28XX_DIGITAL_MODE;
+               em28xx_tuner_callback(dev, XC2028_TUNER_RESET, 0);
+       };
 }
 
 static void em28xx_config_tuner(struct em28xx *dev)
@@ -634,20 +646,6 @@ static int em28xx_hint_board(struct em28xx *dev)
        return -1;
 }
 
-
-static void em28xx_set_model(struct em28xx *dev)
-{
-       dev->is_em2800 = em28xx_boards[dev->model].is_em2800;
-       dev->has_msp34xx = em28xx_boards[dev->model].has_msp34xx;
-       dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
-       dev->decoder = em28xx_boards[dev->model].decoder;
-       dev->video_inputs = em28xx_boards[dev->model].vchannels;
-       dev->analog_gpio = em28xx_boards[dev->model].analog_gpio;
-       dev->has_12mhz_i2s = em28xx_boards[dev->model].has_12mhz_i2s;
-       dev->max_range_640_480 = em28xx_boards[dev->model].max_range_640_480;
-       dev->has_dvb = em28xx_boards[dev->model].has_dvb;
-}
-
 /* ----------------------------------------------------------------------- */
 void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir)
 {
index 97635ab..841c7c2 100644 (file)
@@ -314,14 +314,36 @@ int em28xx_colorlevels_set_default(struct em28xx *dev)
 
 int em28xx_capture_start(struct em28xx *dev, int start)
 {
-       int ret;
+       int rc;
        /* FIXME: which is the best order? */
        /* video registers are sampled by VREF */
-       if ((ret = em28xx_write_reg_bits(dev, USBSUSP_REG, start ? 0x10 : 0x00,
-                                         0x10)) < 0)
-               return ret;
+       rc = em28xx_write_reg_bits(dev, USBSUSP_REG,
+                                  start ? 0x10 : 0x00, 0x10);
+       if (rc < 0)
+               return rc;
+
+       if (!start) {
+               /* disable video capture */
+               rc = em28xx_write_regs(dev, VINENABLE_REG, "\x27", 1);
+               if (rc < 0)
+                       return rc;
+       }
+
        /* enable video capture */
-       return em28xx_write_regs(dev, VINENABLE_REG, start ? "\x67" : "\x27", 1);
+       rc = em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1);
+       if (rc < 0)
+               return rc;
+       if (dev->mode == EM28XX_ANALOG_MODE)
+               rc = em28xx_write_regs(dev, VINENABLE_REG,"\x67", 1);
+       else
+               rc = em28xx_write_regs(dev, VINENABLE_REG,"\x37", 1);
+
+       if (rc < 0)
+               return rc;
+
+       msleep (6);
+
+       return rc;
 }
 
 int em28xx_outfmt_set_yuv422(struct em28xx *dev)
index 96a56fa..00d2f62 100644 (file)
@@ -218,6 +218,21 @@ enum em28xx_decoder {
        EM28XX_SAA7114
 };
 
+#define MAX_GPIO 2
+struct gpio_ctl {
+               /* Register to be set */
+       unsigned char reg;
+               /* Initial/final value */
+       unsigned char val;
+               /* reset value - if set, it will do:
+                  val1 - val2 - val1
+                */
+       unsigned char rst;
+               /* Sleep times
+                */
+       unsigned int  t1, t2, t3;
+};
+
 struct em28xx_board {
        char *name;
        int vchannels;
@@ -233,7 +248,8 @@ struct em28xx_board {
        unsigned int max_range_640_480:1;
        unsigned int has_dvb:1;
 
-       unsigned int analog_gpio;
+       struct gpio_ctl analog_gpio[MAX_GPIO];
+       struct gpio_ctl digital_gpio[MAX_GPIO];
 
        enum em28xx_decoder decoder;
 
@@ -293,7 +309,6 @@ struct em28xx {
        char name[30];          /* name (including minor) of the device */
        int model;              /* index in the device_data struct */
        int devno;              /* marks the number of this device */
-       unsigned int analog_gpio;
        unsigned int is_em2800:1;
        unsigned int has_msp34xx:1;
        unsigned int has_tda9887:1;
@@ -303,6 +318,9 @@ struct em28xx {
        unsigned int max_range_640_480:1;
        unsigned int has_dvb:1;
 
+       struct gpio_ctl (*analog_gpio)[MAX_GPIO];
+       struct gpio_ctl (*digital_gpio)[MAX_GPIO];
+
        int video_inputs;       /* number of video inputs */
        struct list_head        devlist;
 
@@ -443,6 +461,7 @@ extern struct em28xx_board em28xx_boards[];
 extern struct usb_device_id em28xx_id_table[];
 extern const unsigned int em28xx_bcount;
 void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir);
+int em28xx_tuner_callback(void *ptr, int command, int arg);
 
 /* Provided by em28xx-input.c */
 /* TODO: Check if the standard get_key handlers on ir-common can be used */