ARM: dts: rockchip: enable gmac for rk3288 boards

Enable gmac interface for rk3288 board dts.
use "okay" not "ok"

Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>

diff --git a/arch/arm/dts/rk3288-evb.dtsi b/arch/arm/dts/rk3288-evb.dtsi
index cb7d03e..4960f33 100644 (file)
--- a/arch/arm/dts/rk3288-evb.dtsi
+++ b/arch/arm/dts/rk3288-evb.dtsi
@@ -11,6 +11,13 @@
                reg = <0 0x80000000>;
        };
 
+       ext_gmac: external-gmac-clock {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-frequency = <125000000>;
+               clock-output-names = "ext_gmac";
+       };
+
        keys: gpio-keys {
                compatible = "gpio-keys";
                #address-cells = <1>;
@@ -98,6 +105,21 @@
        status = "okay";
 };
 
+&gmac {
+       phy-mode = "rgmii";
+       clock_in_out = "input";
+       snps,reset-gpio = <&gpio4 7 0>;
+       snps,reset-active-low;
+       snps,reset-delays-us = <0 10000 1000000>;
+       assigned-clocks = <&cru SCLK_MAC>;
+       assigned-clock-parents = <&ext_gmac>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&rgmii_pins>;
+       tx_delay = <0x30>;
+       rx_delay = <0x10>;
+       status = "okay";
+};
+
 &hdmi {
        ddc-i2c-bus = <&i2c5>;
        status = "okay";

diff --git a/arch/arm/dts/rk3288-popmetal.dtsi b/arch/arm/dts/rk3288-popmetal.dtsi
index e5be4cb..dd6ce8b 100644 (file)
--- a/arch/arm/dts/rk3288-popmetal.dtsi
+++ b/arch/arm/dts/rk3288-popmetal.dtsi
@@ -203,7 +203,7 @@
        pinctrl-0 = <&rgmii_pins>;
        tx_delay = <0x30>;
        rx_delay = <0x10>;
-       status = "ok";
+       status = "okay";
 };
 
 &hdmi {

diff --git a/arch/arm/dts/rk3288-tinker.dtsi b/arch/arm/dts/rk3288-tinker.dtsi
index ceb4e2b..527493c 100644 (file)
--- a/arch/arm/dts/rk3288-tinker.dtsi
+++ b/arch/arm/dts/rk3288-tinker.dtsi
@@ -149,7 +149,7 @@
        pinctrl-0 = <&rgmii_pins>;
        tx_delay = <0x30>;
        rx_delay = <0x10>;
-       status = "ok";
+       status = "okay";
 };
 
 &hdmi {