V4L/DVB: radio: add support for SAA7706H Car Radio DSP
authorRichard Röjfors <richard.rojfors@pelagicore.com>
Tue, 2 Feb 2010 22:40:49 +0000 (19:40 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Fri, 26 Feb 2010 18:10:52 +0000 (15:10 -0300)
Initial support for the SAA7706H Car Radio DSP.

It is a I2C device and currently the mute control is supported.

When the device is unmuted it is brought out of reset and initiated using
the proposed intialisation sequence.

When muted the DSP is brought into reset state.

[akpm@linux-foundation.org: include delay.h]

Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com>
Cc: Douglas Schilling Landgraf <dougsland@gmail.com>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/radio/Kconfig
drivers/media/radio/Makefile
drivers/media/radio/saa7706h.c [new file with mode: 0644]
include/media/v4l2-chip-ident.h

index 3f40f37..e5f0d7a 100644 (file)
@@ -417,6 +417,18 @@ config RADIO_TEA5764_XTAL
          Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N
          here if TEA5764 reference frequency is connected in FREQIN.
 
+config RADIO_SAA7706H
+       tristate "SAA7706H Car Radio DSP"
+       depends on I2C && VIDEO_V4L2
+       ---help---
+         Say Y here if you want to use the SAA7706H Car radio Digital
+         Signal Processor, found for instance on the Russellville development
+         board. On the russellville the device is connected to internal
+         timberdale I2C bus.
+
+         To compile this driver as a module, choose M here: the
+         module will be called SAA7706H.
+
 config RADIO_TEF6862
        tristate "TEF6862 Car Radio Enhanced Selectivity Tuner"
        depends on I2C && VIDEO_V4L2
index 01922ad..f681dbf 100644 (file)
@@ -23,6 +23,7 @@ obj-$(CONFIG_USB_DSBR) += dsbr100.o
 obj-$(CONFIG_RADIO_SI470X) += si470x/
 obj-$(CONFIG_USB_MR800) += radio-mr800.o
 obj-$(CONFIG_RADIO_TEA5764) += radio-tea5764.o
+obj-$(CONFIG_RADIO_SAA7706H) += saa7706h.o
 obj-$(CONFIG_RADIO_TEF6862) += tef6862.o
 
 EXTRA_CFLAGS += -Isound
diff --git a/drivers/media/radio/saa7706h.c b/drivers/media/radio/saa7706h.c
new file mode 100644 (file)
index 0000000..5db5528
--- /dev/null
@@ -0,0 +1,451 @@
+/*
+ * saa7706.c Philips SAA7706H Car Radio DSP driver
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-chip-ident.h>
+
+#define DRIVER_NAME "saa7706h"
+
+/* the I2C memory map looks like this
+
+       $1C00 - $FFFF Not Used
+       $2200 - $3FFF Reserved YRAM (DSP2) space
+       $2000 - $21FF YRAM (DSP2)
+       $1FF0 - $1FFF Hardware Registers
+       $1280 - $1FEF Reserved XRAM (DSP2) space
+       $1000 - $127F XRAM (DSP2)
+       $0FFF        DSP CONTROL
+       $0A00 - $0FFE Reserved
+       $0980 - $09FF Reserved YRAM (DSP1) space
+       $0800 - $097F YRAM (DSP1)
+       $0200 - $07FF Not Used
+       $0180 - $01FF Reserved XRAM (DSP1) space
+       $0000 - $017F XRAM (DSP1)
+*/
+
+#define SAA7706H_REG_CTRL              0x0fff
+#define SAA7706H_CTRL_BYP_PLL          0x0001
+#define SAA7706H_CTRL_PLL_DIV_MASK     0x003e
+#define SAA7706H_CTRL_PLL3_62975MHZ    0x003e
+#define SAA7706H_CTRL_DSP_TURBO                0x0040
+#define SAA7706H_CTRL_PC_RESET_DSP1    0x0080
+#define SAA7706H_CTRL_PC_RESET_DSP2    0x0100
+#define SAA7706H_CTRL_DSP1_ROM_EN_MASK 0x0600
+#define SAA7706H_CTRL_DSP1_FUNC_PROM   0x0000
+#define SAA7706H_CTRL_DSP2_ROM_EN_MASK 0x1800
+#define SAA7706H_CTRL_DSP2_FUNC_PROM   0x0000
+#define SAA7706H_CTRL_DIG_SIL_INTERPOL 0x8000
+
+#define SAA7706H_REG_EVALUATION                        0x1ff0
+#define SAA7706H_EVAL_DISABLE_CHARGE_PUMP      0x000001
+#define SAA7706H_EVAL_DCS_CLOCK                        0x000002
+#define SAA7706H_EVAL_GNDRC1_ENABLE            0x000004
+#define SAA7706H_EVAL_GNDRC2_ENABLE            0x000008
+
+#define SAA7706H_REG_CL_GEN1                   0x1ff3
+#define SAA7706H_CL_GEN1_MIN_LOOPGAIN_MASK     0x00000f
+#define SAA7706H_CL_GEN1_LOOPGAIN_MASK         0x0000f0
+#define SAA7706H_CL_GEN1_COARSE_RATION         0xffff00
+
+#define SAA7706H_REG_CL_GEN2                   0x1ff4
+#define SAA7706H_CL_GEN2_WSEDGE_FALLING                0x000001
+#define SAA7706H_CL_GEN2_STOP_VCO              0x000002
+#define SAA7706H_CL_GEN2_FRERUN                        0x000004
+#define SAA7706H_CL_GEN2_ADAPTIVE              0x000008
+#define SAA7706H_CL_GEN2_FINE_RATIO_MASK       0x0ffff0
+
+#define SAA7706H_REG_CL_GEN4           0x1ff6
+#define SAA7706H_CL_GEN4_BYPASS_PLL1   0x001000
+#define SAA7706H_CL_GEN4_PLL1_DIV_MASK 0x03e000
+#define SAA7706H_CL_GEN4_DSP1_TURBO    0x040000
+
+#define SAA7706H_REG_SEL       0x1ff7
+#define SAA7706H_SEL_DSP2_SRCA_MASK    0x000007
+#define SAA7706H_SEL_DSP2_FMTA_MASK    0x000031
+#define SAA7706H_SEL_DSP2_SRCB_MASK    0x0001c0
+#define SAA7706H_SEL_DSP2_FMTB_MASK    0x000e00
+#define SAA7706H_SEL_DSP1_SRC_MASK     0x003000
+#define SAA7706H_SEL_DSP1_FMT_MASK     0x01c003
+#define SAA7706H_SEL_SPDIF2            0x020000
+#define SAA7706H_SEL_HOST_IO_FMT_MASK  0x1c0000
+#define SAA7706H_SEL_EN_HOST_IO                0x200000
+
+#define SAA7706H_REG_IAC               0x1ff8
+#define SAA7706H_REG_CLK_SET           0x1ff9
+#define SAA7706H_REG_CLK_COEFF         0x1ffa
+#define SAA7706H_REG_INPUT_SENS                0x1ffb
+#define SAA7706H_INPUT_SENS_RDS_VOL_MASK       0x0003f
+#define SAA7706H_INPUT_SENS_FM_VOL_MASK                0x00fc0
+#define SAA7706H_INPUT_SENS_FM_MPX             0x01000
+#define SAA7706H_INPUT_SENS_OFF_FILTER_A_EN    0x02000
+#define SAA7706H_INPUT_SENS_OFF_FILTER_B_EN    0x04000
+#define SAA7706H_REG_PHONE_NAV_AUDIO   0x1ffc
+#define SAA7706H_REG_IO_CONF_DSP2      0x1ffd
+#define SAA7706H_REG_STATUS_DSP2       0x1ffe
+#define SAA7706H_REG_PC_DSP2           0x1fff
+
+#define SAA7706H_DSP1_MOD0     0x0800
+#define SAA7706H_DSP1_ROM_VER  0x097f
+#define SAA7706H_DSP2_MPTR0    0x1000
+
+#define SAA7706H_DSP1_MODPNTR  0x0000
+
+#define SAA7706H_DSP2_XMEM_CONTLLCW    0x113e
+#define SAA7706H_DSP2_XMEM_BUSAMP      0x114a
+#define SAA7706H_DSP2_XMEM_FDACPNTR    0x11f9
+#define SAA7706H_DSP2_XMEM_IIS1PNTR    0x11fb
+
+#define SAA7706H_DSP2_YMEM_PVGA                0x212a
+#define SAA7706H_DSP2_YMEM_PVAT1       0x212b
+#define SAA7706H_DSP2_YMEM_PVAT                0x212c
+#define SAA7706H_DSP2_YMEM_ROM_VER     0x21ff
+
+#define SUPPORTED_DSP1_ROM_VER         0x667
+
+struct saa7706h_state {
+       struct v4l2_subdev sd;
+       unsigned muted;
+};
+
+static inline struct saa7706h_state *to_state(struct v4l2_subdev *sd)
+{
+       return container_of(sd, struct saa7706h_state, sd);
+}
+
+static int saa7706h_i2c_send(struct i2c_client *client, const u8 *data, int len)
+{
+       int err = i2c_master_send(client, data, len);
+       if (err == len)
+               return 0;
+       return err > 0 ? -EIO : err;
+}
+
+static int saa7706h_i2c_transfer(struct i2c_client *client,
+       struct i2c_msg *msgs, int num)
+{
+       int err = i2c_transfer(client->adapter, msgs, num);
+       if (err == num)
+               return 0;
+       return err > 0 ? -EIO : err;
+}
+
+static int saa7706h_set_reg24(struct v4l2_subdev *sd, u16 reg, u32 val)
+{
+       struct i2c_client *client = v4l2_get_subdevdata(sd);
+       u8 buf[5];
+       int pos = 0;
+
+       buf[pos++] = reg >> 8;
+       buf[pos++] = reg;
+       buf[pos++] = val >> 16;
+       buf[pos++] = val >> 8;
+       buf[pos++] = val;
+
+       return saa7706h_i2c_send(client, buf, pos);
+}
+
+static int saa7706h_set_reg24_err(struct v4l2_subdev *sd, u16 reg, u32 val,
+       int *err)
+{
+       return *err ? *err : saa7706h_set_reg24(sd, reg, val);
+}
+
+static int saa7706h_set_reg16(struct v4l2_subdev *sd, u16 reg, u16 val)
+{
+       struct i2c_client *client = v4l2_get_subdevdata(sd);
+       u8 buf[4];
+       int pos = 0;
+
+       buf[pos++] = reg >> 8;
+       buf[pos++] = reg;
+       buf[pos++] = val >> 8;
+       buf[pos++] = val;
+
+       return saa7706h_i2c_send(client, buf, pos);
+}
+
+static int saa7706h_set_reg16_err(struct v4l2_subdev *sd, u16 reg, u16 val,
+       int *err)
+{
+       return *err ? *err : saa7706h_set_reg16(sd, reg, val);
+}
+
+static int saa7706h_get_reg16(struct v4l2_subdev *sd, u16 reg)
+{
+       struct i2c_client *client = v4l2_get_subdevdata(sd);
+       u8 buf[2];
+       int err;
+       u8 regaddr[] = {reg >> 8, reg};
+       struct i2c_msg msg[] = { {client->addr, 0, sizeof(regaddr), regaddr},
+                               {client->addr, I2C_M_RD, sizeof(buf), buf} };
+
+       err = saa7706h_i2c_transfer(client, msg, ARRAY_SIZE(msg));
+       if (err)
+               return err;
+
+       return buf[0] << 8 | buf[1];
+}
+
+static int saa7706h_unmute(struct v4l2_subdev *sd)
+{
+       struct saa7706h_state *state = to_state(sd);
+       int err = 0;
+
+       err = saa7706h_set_reg16_err(sd, SAA7706H_REG_CTRL,
+               SAA7706H_CTRL_PLL3_62975MHZ | SAA7706H_CTRL_PC_RESET_DSP1 |
+               SAA7706H_CTRL_PC_RESET_DSP2, &err);
+
+       /* newer versions of the chip requires a small sleep after reset */
+       msleep(1);
+
+       err = saa7706h_set_reg16_err(sd, SAA7706H_REG_CTRL,
+               SAA7706H_CTRL_PLL3_62975MHZ, &err);
+
+       err = saa7706h_set_reg24_err(sd, SAA7706H_REG_EVALUATION, 0, &err);
+
+       err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CL_GEN1, 0x040022, &err);
+
+       err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CL_GEN2,
+               SAA7706H_CL_GEN2_WSEDGE_FALLING, &err);
+
+       err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CL_GEN4, 0x024080, &err);
+
+       err = saa7706h_set_reg24_err(sd, SAA7706H_REG_SEL, 0x200080, &err);
+
+       err = saa7706h_set_reg24_err(sd, SAA7706H_REG_IAC, 0xf4caed, &err);
+
+       err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CLK_SET, 0x124334, &err);
+
+       err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CLK_COEFF, 0x004a1a,
+               &err);
+
+       err = saa7706h_set_reg24_err(sd, SAA7706H_REG_INPUT_SENS, 0x0071c7,
+               &err);
+
+       err = saa7706h_set_reg24_err(sd, SAA7706H_REG_PHONE_NAV_AUDIO,
+               0x0e22ff, &err);
+
+       err = saa7706h_set_reg24_err(sd, SAA7706H_REG_IO_CONF_DSP2, 0x001ff8,
+               &err);
+
+       err = saa7706h_set_reg24_err(sd, SAA7706H_REG_STATUS_DSP2, 0x080003,
+               &err);
+
+       err = saa7706h_set_reg24_err(sd, SAA7706H_REG_PC_DSP2, 0x000004, &err);
+
+       err = saa7706h_set_reg16_err(sd, SAA7706H_DSP1_MOD0, 0x0c6c, &err);
+
+       err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_MPTR0, 0x000b4b, &err);
+
+       err = saa7706h_set_reg24_err(sd, SAA7706H_DSP1_MODPNTR, 0x000600, &err);
+
+       err = saa7706h_set_reg24_err(sd, SAA7706H_DSP1_MODPNTR, 0x0000c0, &err);
+
+       err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_CONTLLCW, 0x000819,
+               &err);
+
+       err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_CONTLLCW, 0x00085a,
+               &err);
+
+       err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_BUSAMP, 0x7fffff,
+               &err);
+
+       err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_FDACPNTR, 0x2000cb,
+               &err);
+
+       err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_IIS1PNTR, 0x2000cb,
+               &err);
+
+       err = saa7706h_set_reg16_err(sd, SAA7706H_DSP2_YMEM_PVGA, 0x0f80, &err);
+
+       err = saa7706h_set_reg16_err(sd, SAA7706H_DSP2_YMEM_PVAT1, 0x0800,
+               &err);
+
+       err = saa7706h_set_reg16_err(sd, SAA7706H_DSP2_YMEM_PVAT, 0x0800, &err);
+
+       err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_CONTLLCW, 0x000905,
+               &err);
+       if (!err)
+               state->muted = 0;
+       return err;
+}
+
+static int saa7706h_mute(struct v4l2_subdev *sd)
+{
+       struct saa7706h_state *state = to_state(sd);
+       int err;
+
+       err = saa7706h_set_reg16(sd, SAA7706H_REG_CTRL,
+               SAA7706H_CTRL_PLL3_62975MHZ | SAA7706H_CTRL_PC_RESET_DSP1 |
+               SAA7706H_CTRL_PC_RESET_DSP2);
+       if (!err)
+               state->muted = 1;
+       return err;
+}
+
+static int saa7706h_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
+{
+       switch (qc->id) {
+       case V4L2_CID_AUDIO_MUTE:
+               return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1);
+       }
+       return -EINVAL;
+}
+
+static int saa7706h_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+       struct saa7706h_state *state = to_state(sd);
+
+       switch (ctrl->id) {
+       case V4L2_CID_AUDIO_MUTE:
+               ctrl->value = state->muted;
+               return 0;
+       }
+       return -EINVAL;
+}
+
+static int saa7706h_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+       switch (ctrl->id) {
+       case V4L2_CID_AUDIO_MUTE:
+               if (ctrl->value)
+                       return saa7706h_mute(sd);
+               return saa7706h_unmute(sd);
+       }
+       return -EINVAL;
+}
+
+static int saa7706h_g_chip_ident(struct v4l2_subdev *sd,
+       struct v4l2_dbg_chip_ident *chip)
+{
+       struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+       return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_SAA7706H, 0);
+}
+
+static const struct v4l2_subdev_core_ops saa7706h_core_ops = {
+       .g_chip_ident = saa7706h_g_chip_ident,
+       .queryctrl = saa7706h_queryctrl,
+       .g_ctrl = saa7706h_g_ctrl,
+       .s_ctrl = saa7706h_s_ctrl,
+};
+
+static const struct v4l2_subdev_ops saa7706h_ops = {
+       .core = &saa7706h_core_ops,
+};
+
+/*
+ * Generic i2c probe
+ * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
+ */
+
+static int __devinit saa7706h_probe(struct i2c_client *client,
+                       const struct i2c_device_id *id)
+{
+       struct saa7706h_state *state;
+       struct v4l2_subdev *sd;
+       int err;
+
+       /* Check if the adapter supports the needed features */
+       if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+               return -EIO;
+
+       v4l_info(client, "chip found @ 0x%02x (%s)\n",
+                       client->addr << 1, client->adapter->name);
+
+       state = kmalloc(sizeof(struct saa7706h_state), GFP_KERNEL);
+       if (state == NULL)
+               return -ENOMEM;
+       sd = &state->sd;
+       v4l2_i2c_subdev_init(sd, client, &saa7706h_ops);
+
+       /* check the rom versions */
+       err = saa7706h_get_reg16(sd, SAA7706H_DSP1_ROM_VER);
+       if (err < 0)
+               goto err;
+       if (err != SUPPORTED_DSP1_ROM_VER)
+               v4l2_warn(sd, "Unknown DSP1 ROM code version: 0x%x\n", err);
+
+       state->muted = 1;
+
+       /* startup in a muted state */
+       err = saa7706h_mute(sd);
+       if (err)
+               goto err;
+
+       return 0;
+
+err:
+       v4l2_device_unregister_subdev(sd);
+       kfree(to_state(sd));
+
+       printk(KERN_ERR DRIVER_NAME ": Failed to probe: %d\n", err);
+
+       return err;
+}
+
+static int __devexit saa7706h_remove(struct i2c_client *client)
+{
+       struct v4l2_subdev *sd = i2c_get_clientdata(client);
+
+       saa7706h_mute(sd);
+       v4l2_device_unregister_subdev(sd);
+       kfree(to_state(sd));
+       return 0;
+}
+
+static const struct i2c_device_id saa7706h_id[] = {
+       {DRIVER_NAME, 0},
+       {},
+};
+
+MODULE_DEVICE_TABLE(i2c, saa7706h_id);
+
+static struct i2c_driver saa7706h_driver = {
+       .driver = {
+               .owner  = THIS_MODULE,
+               .name   = DRIVER_NAME,
+       },
+       .probe          = saa7706h_probe,
+       .remove         = saa7706h_remove,
+       .id_table       = saa7706h_id,
+};
+
+static __init int saa7706h_init(void)
+{
+       return i2c_add_driver(&saa7706h_driver);
+}
+
+static __exit void saa7706h_exit(void)
+{
+       i2c_del_driver(&saa7706h_driver);
+}
+
+module_init(saa7706h_init);
+module_exit(saa7706h_exit);
+
+MODULE_DESCRIPTION("SAA7706H Car Radio DSP driver");
+MODULE_AUTHOR("Mocean Laboratories");
+MODULE_LICENSE("GPL v2");
index 6cc107d..5341e3d 100644 (file)
@@ -155,6 +155,9 @@ enum {
        /* module adv7343: just ident 7343 */
        V4L2_IDENT_ADV7343 = 7343,
 
+       /* module saa7706h: just ident 7706 */
+       V4L2_IDENT_SAA7706H = 7706,
+
        /* module wm8739: just ident 8739 */
        V4L2_IDENT_WM8739 = 8739,