-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2021 NXP
*/
#include <dt-bindings/clock/imx8ulp-clock.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/imx8ulp-power.h>
+
#include "imx8ulp-pinfunc.h"
/ {
#size-cells = <2>;
aliases {
+ ethernet0 = &fec;
gpio0 = &gpiod;
gpio1 = &gpioe;
gpio2 = &gpiof;
- serial0 = &lpuart5;
mmc0 = &usdhc0;
mmc1 = &usdhc1;
mmc2 = &usdhc2;
- spi0 = &flexspi0;
- spi2 = &flexspi2;
- ethernet0 = &fec;
- i2c7 = &lpi2c7;
- usbphy0 = &usbphy0;
- usb0 = &usbotg0;
- usbphy1 = &usbphy1;
- usb1 = &usbotg1;
+ serial0 = &lpuart4;
+ serial1 = &lpuart5;
+ serial2 = &lpuart6;
+ serial3 = &lpuart7;
};
- cpus: cpus {
+ cpus {
#address-cells = <2>;
#size-cells = <0>;
- idle-states {
- entry-method = "psci";
-
- CPU_SLEEP: cpu-sleep {
- compatible = "arm,idle-state";
- arm,psci-suspend-param = <0x0010033>;
- local-timer-stop;
- entry-latency-us = <1000>;
- exit-latency-us = <700>;
- min-residency-us = <2700>;
- wakeup-latency-us = <1500>;
- };
- };
-
- /* We have 1 clusters with 4 Cortex-A35 cores */
A35_0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a35";
reg = <0x0 0x0>;
enable-method = "psci";
next-level-cache = <&A35_L2>;
- clocks = <&cgc1 IMX8ULP_CLK_A35_DIV>;
};
A35_1: cpu@1 {
reg = <0x0 0x1>;
enable-method = "psci";
next-level-cache = <&A35_L2>;
- clocks = <&cgc1 IMX8ULP_CLK_A35_DIV>;
};
A35_L2: l2-cache0 {
};
};
- a35_opp_table: opp-table {
- compatible = "operating-points-v2";
- opp-shared;
-
- opp-504000000 {
- opp-hz = /bits/ 64 <504000000>;
- opp-microvolt = <800000>;
- clock-latency-ns = <150000>;
- };
-
- opp-744000000 {
- opp-hz = /bits/ 64 <744000000>;
- opp-microvolt = <900000>;
- clock-latency-ns = <150000>;
- };
-
- opp-1008000000 {
- opp-hz = /bits/ 64 <1008000000>;
- opp-microvolt = <1000000>;
- clock-latency-ns = <150000>;
- opp-suspend;
- };
- };
-
- s400_mu: mu@27020000 {
- u-boot,dm-spl;
- compatible = "fsl,imx8ulp-mu";
- reg = <0 0x27020000 0 0x10000>;
- status = "okay";
- };
-
gic: interrupt-controller@2d400000 {
compatible = "arm,gic-v3";
reg = <0x0 0x2d400000 0 0x10000>, /* GIC Dist */
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
+ pmu {
+ compatible = "arm,cortex-a35-pmu";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 7
+ (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupt-affinity = <&A35_0>, <&A35_1>;
+ };
+
psci {
compatible = "arm,psci-1.0";
method = "smc";
#clock-cells = <0>;
};
- sram@0x2201f000 {
+ sram@2201f000 {
compatible = "mmio-sram";
reg = <0x0 0x2201f000 0x0 0x1000>;
#size-cells = <1>;
ranges = <0 0x0 0x2201f000 0x1000>;
- /* TODO: split or unify */
- scmi_pd: scmi_pd@0 {
+ scmi_buf: scmi-sram-section@0 {
compatible = "arm,scmi-shmem";
- reg = <0x0 0x200>;
+ reg = <0x0 0x400>;
};
};
arm,smc-id = <0xc20000fe>;
#address-cells = <1>;
#size-cells = <0>;
- shmem = <&scmi_pd>;
+ shmem = <&scmi_buf>;
scmi_devpd: protocol@11 {
reg = <0x11>;
#power-domain-cells = <1>;
};
- scmi_perf: protocol@13 {
- reg = <0x13>;
+ scmi_sensor: protocol@15 {
+ reg = <0x15>;
+ #thermal-sensor-cells = <1>;
};
};
};
- soc@0 {
+ soc: soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0x0 0x0 0x0 0x80000000>;
+ ranges = <0x0 0x0 0x0 0x40000000>;
- per_bridge0: bus@28000000 {
- compatible = "simple-bus";
- reg = <0x28000000 0x800000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- flexspi0: flexspi@28039000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "nxp,imx8ulp-fspi";
- reg = <0x28039000 0x10000>,
- <0x04000000 0x7ffffff>;
- reg-names = "fspi_base", "fspi_mmap";
- status = "disabled";
- };
+ s4muap: mailbox@27020000 {
+ compatible = "fsl,imx8ulp-mu-s4";
+ reg = <0x27020000 0x10000>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
};
per_bridge3: bus@29000000 {
#size-cells = <1>;
ranges;
- edma1: dma-controller@29010000 {
- compatible = "fsl,imx8ulp-edma";
- reg = <0x29010000 0x10000>,
- <0x29020000 0x10000>, <0x29030000 0x10000>,
- <0x29040000 0x10000>, <0x29050000 0x10000>,
- <0x29060000 0x10000>, <0x29070000 0x10000>,
- <0x29080000 0x10000>, <0x29090000 0x10000>,
- <0x290a0000 0x10000>, <0x290b0000 0x10000>,
- <0x290c0000 0x10000>, <0x290d0000 0x10000>,
- <0x290e0000 0x10000>, <0x290f0000 0x10000>,
- <0x29100000 0x10000>, <0x29110000 0x10000>,
- <0x29120000 0x10000>, <0x29130000 0x10000>,
- <0x29140000 0x10000>, <0x29150000 0x10000>,
- <0x29160000 0x10000>, <0x29170000 0x10000>,
- <0x29180000 0x10000>, <0x29190000 0x10000>,
- <0x291a0000 0x10000>, <0x291b0000 0x10000>,
- <0x291c0000 0x10000>, <0x291d0000 0x10000>,
- <0x291e0000 0x10000>, <0x291f0000 0x10000>,
- <0x29200000 0x10000>, <0x29210000 0x10000>;
- #dma-cells = <3>;
- dma-channels = <32>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "edma1-chan0-tx", "edma1-chan1-tx",
- "edma1-chan2-tx", "edma1-chan3-tx",
- "edma1-chan4-tx", "edma1-chan5-tx",
- "edma1-chan6-tx", "edma1-chan7-tx",
- "edma1-chan8-tx", "edma1-chan9-tx",
- "edma1-chan10-tx", "edma1-chan11-tx",
- "edma1-chan12-tx", "edma1-chan13-tx",
- "edma1-chan14-tx", "edma1-chan15-tx",
- "edma1-chan16-tx", "edma1-chan17-tx",
- "edma1-chan18-tx", "edma1-chan19-tx",
- "edma1-chan20-tx", "edma1-chan21-tx",
- "edma1-chan22-tx", "edma1-chan23-tx",
- "edma1-chan24-tx", "edma1-chan25-tx",
- "edma1-chan26-tx", "edma1-chan27-tx",
- "edma1-chan28-tx", "edma1-chan29-tx",
- "edma1-chan30-tx", "edma1-chan31-tx";
- clocks = <&pcc3 IMX8ULP_CLK_DMA1_MP>,
- <&pcc3 IMX8ULP_CLK_DMA1_CH0>, <&pcc3 IMX8ULP_CLK_DMA1_CH1>,
- <&pcc3 IMX8ULP_CLK_DMA1_CH2>, <&pcc3 IMX8ULP_CLK_DMA1_CH3>,
- <&pcc3 IMX8ULP_CLK_DMA1_CH4>, <&pcc3 IMX8ULP_CLK_DMA1_CH5>,
- <&pcc3 IMX8ULP_CLK_DMA1_CH6>, <&pcc3 IMX8ULP_CLK_DMA1_CH7>,
- <&pcc3 IMX8ULP_CLK_DMA1_CH8>, <&pcc3 IMX8ULP_CLK_DMA1_CH9>,
- <&pcc3 IMX8ULP_CLK_DMA1_CH10>, <&pcc3 IMX8ULP_CLK_DMA1_CH11>,
- <&pcc3 IMX8ULP_CLK_DMA1_CH12>, <&pcc3 IMX8ULP_CLK_DMA1_CH13>,
- <&pcc3 IMX8ULP_CLK_DMA1_CH14>, <&pcc3 IMX8ULP_CLK_DMA1_CH15>,
- <&pcc3 IMX8ULP_CLK_DMA1_CH16>, <&pcc3 IMX8ULP_CLK_DMA1_CH17>,
- <&pcc3 IMX8ULP_CLK_DMA1_CH18>, <&pcc3 IMX8ULP_CLK_DMA1_CH19>,
- <&pcc3 IMX8ULP_CLK_DMA1_CH20>, <&pcc3 IMX8ULP_CLK_DMA1_CH21>,
- <&pcc3 IMX8ULP_CLK_DMA1_CH22>, <&pcc3 IMX8ULP_CLK_DMA1_CH23>,
- <&pcc3 IMX8ULP_CLK_DMA1_CH24>, <&pcc3 IMX8ULP_CLK_DMA1_CH25>,
- <&pcc3 IMX8ULP_CLK_DMA1_CH26>, <&pcc3 IMX8ULP_CLK_DMA1_CH27>,
- <&pcc3 IMX8ULP_CLK_DMA1_CH28>, <&pcc3 IMX8ULP_CLK_DMA1_CH29>,
- <&pcc3 IMX8ULP_CLK_DMA1_CH30>, <&pcc3 IMX8ULP_CLK_DMA1_CH31>;
- clock-names = "edma-mp-clk",
- "edma1-chan0-clk", "edma1-chan1-clk",
- "edma1-chan2-clk", "edma1-chan3-clk",
- "edma1-chan4-clk", "edma1-chan5-clk",
- "edma1-chan6-clk", "edma1-chan7-clk",
- "edma1-chan8-clk", "edma1-chan9-clk",
- "edma1-chan10-clk", "edma1-chan11-clk",
- "edma1-chan12-clk", "edma1-chan13-clk",
- "edma1-chan14-clk", "edma1-chan15-clk",
- "edma1-chan16-clk", "edma1-chan17-clk",
- "edma1-chan18-clk", "edma1-chan19-clk",
- "edma1-chan20-clk", "edma1-chan21-clk",
- "edma1-chan22-clk", "edma1-chan23-clk",
- "edma1-chan24-clk", "edma1-chan25-clk",
- "edma1-chan26-clk", "edma1-chan27-clk",
- "edma1-chan28-clk", "edma1-chan29-clk",
- "edma1-chan30-clk", "edma1-chan31-clk";
- status = "okay";
+ mu: mailbox@29220000 {
+ compatible = "fsl,imx8ulp-mu";
+ reg = <0x29220000 0x10000>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
+ status = "disabled";
+ };
+
+ mu3: mailbox@29230000 {
+ compatible = "fsl,imx8ulp-mu";
+ reg = <0x29230000 0x10000>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc3 IMX8ULP_CLK_MU3_A>;
+ #mbox-cells = <2>;
+ status = "disabled";
};
wdog3: watchdog@292a0000 {
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pcc3 IMX8ULP_CLK_WDOG3>;
assigned-clocks = <&pcc3 IMX8ULP_CLK_WDOG3>;
- assigned-clocks-parents = <&cgc1 IMX8ULP_CLK_SOSC_DIV2>;
+ assigned-clock-parents = <&cgc1 IMX8ULP_CLK_SOSC_DIV2>;
timeout-sec = <40>;
};
cgc1: clock-controller@292c0000 {
compatible = "fsl,imx8ulp-cgc1";
reg = <0x292c0000 0x10000>;
- clocks = <&rosc>, <&sosc>, <&frosc>, <&lposc>;
- clock-names = "rosc", "sosc", "frosc", "lposc";
#clock-cells = <1>;
};
compatible = "fsl,imx8ulp-pcc3";
reg = <0x292d0000 0x10000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
tpm5: tpm@29340000 {
clocks = <&pcc3 IMX8ULP_CLK_TPM5>,
<&pcc3 IMX8ULP_CLK_TPM5>;
clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ lpi2c4: i2c@29370000 {
+ compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x29370000 0x10000>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc3 IMX8ULP_CLK_LPI2C4>,
+ <&pcc3 IMX8ULP_CLK_LPI2C4>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&pcc3 IMX8ULP_CLK_LPI2C4>;
+ assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
+ assigned-clock-rates = <48000000>;
+ status = "disabled";
+ };
+
+ lpi2c5: i2c@29380000 {
+ compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x29380000 0x10000>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc3 IMX8ULP_CLK_LPI2C5>,
+ <&pcc3 IMX8ULP_CLK_LPI2C5>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&pcc3 IMX8ULP_CLK_LPI2C5>;
+ assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
+ assigned-clock-rates = <48000000>;
+ status = "disabled";
};
lpuart4: serial@29390000 {
lpuart5: serial@293a0000 {
compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x293a0000 0x1000>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pcc3 IMX8ULP_CLK_LPUART5>;
clock-names = "ipg";
status = "disabled";
};
+
+ lpspi4: spi@293b0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx8ulp-spi", "fsl,imx7ulp-spi";
+ reg = <0x293b0000 0x10000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc3 IMX8ULP_CLK_LPSPI4>,
+ <&pcc3 IMX8ULP_CLK_LPSPI4>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&pcc3 IMX8ULP_CLK_LPSPI4>;
+ assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
+ assigned-clock-rates = <48000000>;
+ status = "disabled";
+ };
+
+ lpspi5: spi@293c0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx8ulp-spi", "fsl,imx7ulp-spi";
+ reg = <0x293c0000 0x10000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc3 IMX8ULP_CLK_LPSPI5>,
+ <&pcc3 IMX8ULP_CLK_LPSPI5>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&pcc3 IMX8ULP_CLK_LPSPI5>;
+ assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
+ assigned-clock-rates = <48000000>;
+ status = "disabled";
+ };
};
per_bridge4: bus@29800000 {
compatible = "fsl,imx8ulp-pcc4";
reg = <0x29800000 0x10000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
- lpi2c6: lpi2c6@29840000 {
+ lpi2c6: i2c@29840000 {
compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x29840000 0x10000>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pcc4 IMX8ULP_CLK_LPI2C6>,
<&pcc4 IMX8ULP_CLK_LPI2C6>;
clock-names = "per", "ipg";
+ assigned-clocks = <&pcc4 IMX8ULP_CLK_LPI2C6>;
+ assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
+ assigned-clock-rates = <48000000>;
status = "disabled";
};
- lpi2c7: lpi2c7@29850000 {
+ lpi2c7: i2c@29850000 {
compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x29850000 0x10000>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pcc4 IMX8ULP_CLK_LPI2C7>,
<&pcc4 IMX8ULP_CLK_LPI2C7>;
clock-names = "per", "ipg";
+ assigned-clocks = <&pcc4 IMX8ULP_CLK_LPI2C7>;
+ assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
+ assigned-clock-rates = <48000000>;
status = "disabled";
};
- flexspi2: flexspi@29810000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "nxp,imx8ulp-fspi";
- reg = <0x29810000 0x10000>,
- <0x60000000 0xfffffff>;
- reg-names = "fspi_base", "fspi_mmap";
+ lpuart6: serial@29860000 {
+ compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+ reg = <0x29860000 0x1000>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc4 IMX8ULP_CLK_LPUART6>;
+ clock-names = "ipg";
status = "disabled";
};
- flexspi2_nand: flexspi2_nand@29810000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx8-fspi-nand";
- reg = <0x29810000 0x10000>, <0x60000000 0x10000000>;
- reg-names = "FlexSPI", "FlexSPI-memory";
+ lpuart7: serial@29870000 {
+ compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+ reg = <0x29870000 0x1000>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc4 IMX8ULP_CLK_LPUART7>;
+ clock-names = "ipg";
status = "disabled";
};
iomuxc1: pinctrl@298c0000 {
compatible = "fsl,imx8ulp-iomuxc1";
reg = <0x298c0000 0x10000>;
- fsl,mux_mask = <0xf00>;
};
usdhc0: mmc@298d0000 {
- compatible = "fsl,imx8ulp-usdhc", "fsl,imx7ulp-usdhc";
+ compatible = "fsl,imx8ulp-usdhc", "fsl,imx8mm-usdhc";
reg = <0x298d0000 0x10000>;
interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cgc1 IMX8ULP_CLK_DUMMY>,
- <&cgc1 IMX8ULP_CLK_DUMMY>,
+ clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>,
+ <&cgc1 IMX8ULP_CLK_XBAR_AD_DIVPLAT>,
<&pcc4 IMX8ULP_CLK_USDHC0>;
clock-names = "ipg", "ahb", "per";
+ power-domains = <&scmi_devpd IMX8ULP_PD_USDHC0>;
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
usdhc1: mmc@298e0000 {
- compatible = "fsl,imx8ulp-usdhc", "fsl,imx7ulp-usdhc";
+ compatible = "fsl,imx8ulp-usdhc", "fsl,imx8mm-usdhc";
reg = <0x298e0000 0x10000>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cgc1 IMX8ULP_CLK_DUMMY>,
- <&cgc1 IMX8ULP_CLK_DUMMY>,
+ clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>,
+ <&cgc1 IMX8ULP_CLK_NIC_PER_DIVPLAT>,
<&pcc4 IMX8ULP_CLK_USDHC1>;
clock-names = "ipg", "ahb", "per";
+ power-domains = <&scmi_devpd IMX8ULP_PD_USDHC1>;
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
<&cgc1 IMX8ULP_CLK_NIC_PER_DIVPLAT>,
<&pcc4 IMX8ULP_CLK_USDHC2>;
clock-names = "ipg", "ahb", "per";
- assigned-clocks = <&cgc1 IMX8ULP_CLK_SPLL3_PFD2>, <&pcc4 IMX8ULP_CLK_USDHC2>;
- assigned-clock-parents = <0>, <&cgc1 IMX8ULP_CLK_SPLL3_PFD2_DIV1>;
- assigned-clock-rates = <396000000>, <396000000>;
+ power-domains = <&scmi_devpd IMX8ULP_PD_USDHC2_USB1>;
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
- usbotg0: usb@29900000 {
- compatible = "fsl,imx8ulp-usb", "fsl,imx7ulp-usb",
- "fsl,imx27-usb";
- reg = <0x29900000 0x200>;
- interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&pcc4 IMX8ULP_CLK_USB0>;
- fsl,usbphy = <&usbphy0>;
- fsl,usbmisc = <&usbmisc0 0>;
- ahb-burst-config = <0x0>;
- tx-burst-size-dword = <0x8>;
- rx-burst-size-dword = <0x8>;
- status = "disabled";
- };
-
- usbmisc0: usbmisc@29900200 {
- #index-cells = <1>;
- compatible = "fsl,imx8ulp-usbmisc", "fsl,imx7ulp-usbmisc",
- "fsl,imx6q-usbmisc";
- reg = <0x29900200 0x200>;
- };
-
- usbphy0: usbphy@29910000 {
- compatible = "fsl,imx8ulp-usbphy",
- "fsl,imx7ulp-usbphy", "fsl,imx23-usbphy";
- reg = <0x29910000 0x1000>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&pcc4 IMX8ULP_CLK_USB0_PHY>;
- };
-
- usbotg1: usb@29920000 {
- compatible = "fsl,imx8ulp-usb", "fsl,imx7ulp-usb",
- "fsl,imx27-usb";
- reg = <0x29920000 0x200>;
- interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&pcc4 IMX8ULP_CLK_USB1>;
- fsl,usbphy = <&usbphy1>;
- fsl,usbmisc = <&usbmisc1 0>;
- ahb-burst-config = <0x0>;
- tx-burst-size-dword = <0x8>;
- rx-burst-size-dword = <0x8>;
- status = "disabled";
- };
-
- usbmisc1: usbmisc@29920200 {
- #index-cells = <1>;
- compatible = "fsl,imx8ulp-usbmisc", "fsl,imx7ulp-usbmisc",
- "fsl,imx6q-usbmisc";
- reg = <0x29920200 0x200>;
- };
-
- usbphy1: usbphy@29930000 {
- compatible = "fsl,imx8ulp-usbphy",
- "fsl,imx7ulp-usbphy", "fsl,imx23-usbphy";
- reg = <0x29930000 0x1000>;
- interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&pcc4 IMX8ULP_CLK_USB1_PHY>;
- };
-
fec: ethernet@29950000 {
- compatible = "fsl,imx8ulp-fec", "fsl,imx6sx-fec";
+ compatible = "fsl,imx8ulp-fec", "fsl,imx6ul-fec", "fsl,imx6q-fec";
reg = <0x29950000 0x10000>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&pcc4 IMX8ULP_CLK_ENET>,
- <&pcc4 IMX8ULP_CLK_ENET>,
- <&cgc1 IMX8ULP_CLK_ENETSTAMP_SEL>,
- <&pcc4 IMX8ULP_CLK_ENET>,
- <&pcc4 IMX8ULP_CLK_ENET>;
- clock-names = "ipg", "ahb", "ptp",
- "enet_clk_ref", "enet_out";
- fsl,num-tx-queues = <3>;
- fsl,num-rx-queues = <3>;
+ interrupt-names = "int0";
+ fsl,num-tx-queues = <1>;
+ fsl,num-rx-queues = <1>;
status = "disabled";
};
-
};
- gpioe: gpio@2d000000 {
- compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio";
- reg = <0x2d000080 0x1000 0x2d000040 0x40>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- #interrupt-cells = <2>;
- clocks = <&pcc4 IMX8ULP_CLK_RGPIOE>,
- <&pcc4 IMX8ULP_CLK_PCTLE>;
- clock-names = "gpio", "port";
- gpio-ranges = <&iomuxc1 0 32 24>;
+ gpioe: gpio@2d000080 {
+ compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
+ reg = <0x2d000080 0x1000>, <0x2d000040 0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pcc4 IMX8ULP_CLK_RGPIOE>,
+ <&pcc4 IMX8ULP_CLK_PCTLE>;
+ clock-names = "gpio", "port";
+ gpio-ranges = <&iomuxc1 0 32 24>;
};
- gpiof: gpio@2d010000 {
- compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio";
- reg = <0x2d010080 0x1000 0x2d010040 0x40>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- #interrupt-cells = <2>;
- clocks = <&pcc4 IMX8ULP_CLK_RGPIOF>,
- <&pcc4 IMX8ULP_CLK_PCTLF>;
- clock-names = "gpio", "port";
- gpio-ranges = <&iomuxc1 0 64 24>;
+ gpiof: gpio@2d010080 {
+ compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
+ reg = <0x2d010080 0x1000>, <0x2d010040 0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pcc4 IMX8ULP_CLK_RGPIOF>,
+ <&pcc4 IMX8ULP_CLK_PCTLF>;
+ clock-names = "gpio", "port";
+ gpio-ranges = <&iomuxc1 0 64 32>;
};
per_bridge5: bus@2d800000 {
#size-cells = <1>;
ranges;
- edma2: dma-controller@2d800000 {
- compatible = "fsl,imx8ulp-edma";
- reg = <0x2d800000 0x10000>,
- <0x2d810000 0x10000>, <0x2d820000 0x10000>,
- <0x2d830000 0x10000>, <0x2d840000 0x10000>,
- <0x2d850000 0x10000>, <0x2d860000 0x10000>,
- <0x2d870000 0x10000>, <0x2d880000 0x10000>,
- <0x2d890000 0x10000>, <0x2d8a0000 0x10000>,
- <0x2d8b0000 0x10000>, <0x2d8c0000 0x10000>,
- <0x2d8d0000 0x10000>, <0x2d8e0000 0x10000>,
- <0x2d8f0000 0x10000>, <0x2d900000 0x10000>,
- <0x2d910000 0x10000>, <0x2d920000 0x10000>,
- <0x2d930000 0x10000>, <0x2d940000 0x10000>,
- <0x2d950000 0x10000>, <0x2d960000 0x10000>,
- <0x2d970000 0x10000>, <0x2d980000 0x10000>,
- <0x2d990000 0x10000>, <0x2d9a0000 0x10000>,
- <0x2d9b0000 0x10000>, <0x2d9c0000 0x10000>,
- <0x2d9d0000 0x10000>, <0x2d9e0000 0x10000>,
- <0x2d9f0000 0x10000>, <0x2da00000 0x10000>;
- #dma-cells = <3>;
- dma-channels = <32>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "edma2-chan0-tx", "edma2-chan1-tx",
- "edma2-chan2-tx", "edma2-chan3-tx",
- "edma2-chan4-tx", "edma2-chan5-tx",
- "edma2-chan6-tx", "edma2-chan7-tx",
- "edma2-chan8-tx", "edma2-chan9-tx",
- "edma2-chan10-tx", "edma2-chan11-tx",
- "edma2-chan12-tx", "edma2-chan13-tx",
- "edma2-chan14-tx", "edma2-chan15-tx",
- "edma2-chan16-tx", "edma2-chan17-tx",
- "edma2-chan18-tx", "edma2-chan19-tx",
- "edma2-chan20-tx", "edma2-chan21-tx",
- "edma2-chan22-tx", "edma2-chan23-tx",
- "edma2-chan24-tx", "edma2-chan25-tx",
- "edma2-chan26-tx", "edma2-chan27-tx",
- "edma2-chan28-tx", "edma2-chan29-tx",
- "edma2-chan30-tx", "edma2-chan31-tx";
- clocks = <&pcc5 IMX8ULP_CLK_DMA2_MP>,
- <&pcc5 IMX8ULP_CLK_DMA2_CH0>, <&pcc5 IMX8ULP_CLK_DMA2_CH1>,
- <&pcc5 IMX8ULP_CLK_DMA2_CH2>, <&pcc5 IMX8ULP_CLK_DMA2_CH3>,
- <&pcc5 IMX8ULP_CLK_DMA2_CH4>, <&pcc5 IMX8ULP_CLK_DMA2_CH5>,
- <&pcc5 IMX8ULP_CLK_DMA2_CH6>, <&pcc5 IMX8ULP_CLK_DMA2_CH7>,
- <&pcc5 IMX8ULP_CLK_DMA2_CH8>, <&pcc5 IMX8ULP_CLK_DMA2_CH9>,
- <&pcc5 IMX8ULP_CLK_DMA2_CH10>, <&pcc5 IMX8ULP_CLK_DMA2_CH11>,
- <&pcc5 IMX8ULP_CLK_DMA2_CH12>, <&pcc5 IMX8ULP_CLK_DMA2_CH13>,
- <&pcc5 IMX8ULP_CLK_DMA2_CH14>, <&pcc5 IMX8ULP_CLK_DMA2_CH15>,
- <&pcc5 IMX8ULP_CLK_DMA2_CH16>, <&pcc5 IMX8ULP_CLK_DMA2_CH17>,
- <&pcc5 IMX8ULP_CLK_DMA2_CH18>, <&pcc5 IMX8ULP_CLK_DMA2_CH19>,
- <&pcc5 IMX8ULP_CLK_DMA2_CH20>, <&pcc5 IMX8ULP_CLK_DMA2_CH21>,
- <&pcc5 IMX8ULP_CLK_DMA2_CH22>, <&pcc5 IMX8ULP_CLK_DMA2_CH23>,
- <&pcc5 IMX8ULP_CLK_DMA2_CH24>, <&pcc5 IMX8ULP_CLK_DMA2_CH25>,
- <&pcc5 IMX8ULP_CLK_DMA2_CH26>, <&pcc5 IMX8ULP_CLK_DMA2_CH27>,
- <&pcc5 IMX8ULP_CLK_DMA2_CH28>, <&pcc5 IMX8ULP_CLK_DMA2_CH29>,
- <&pcc5 IMX8ULP_CLK_DMA2_CH30>, <&pcc5 IMX8ULP_CLK_DMA2_CH31>;
- clock-names = "edma-mp-clk",
- "edma2-chan0-clk", "edma2-chan1-clk",
- "edma2-chan2-clk", "edma2-chan3-clk",
- "edma2-chan4-clk", "edma2-chan5-clk",
- "edma2-chan6-clk", "edma2-chan7-clk",
- "edma2-chan8-clk", "edma2-chan9-clk",
- "edma2-chan10-clk", "edma2-chan11-clk",
- "edma2-chan12-clk", "edma2-chan13-clk",
- "edma2-chan14-clk", "edma2-chan15-clk",
- "edma2-chan16-clk", "edma2-chan17-clk",
- "edma2-chan18-clk", "edma2-chan19-clk",
- "edma2-chan20-clk", "edma2-chan21-clk",
- "edma2-chan22-clk", "edma2-chan23-clk",
- "edma2-chan24-clk", "edma2-chan25-clk",
- "edma2-chan26-clk", "edma2-chan27-clk",
- "edma2-chan28-clk", "edma2-chan29-clk",
- "edma2-chan30-clk", "edma2-chan31-clk";
- status = "okay";
- };
-
cgc2: clock-controller@2da60000 {
compatible = "fsl,imx8ulp-cgc2";
reg = <0x2da60000 0x10000>;
- clocks = <&sosc>, <&frosc>;
- clock-names = "sosc", "frosc";
#clock-cells = <1>;
};
compatible = "fsl,imx8ulp-pcc5";
reg = <0x2da70000 0x10000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
};
- gpiod: gpio@2e200000 {
- compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio";
- reg = <0x2e200080 0x1000 0x2e200040 0x40>;
+ gpiod: gpio@2e200080 {
+ compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
+ reg = <0x2e200080 0x1000>, <0x2e200040 0x40>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
projects / platform / kernel / u-boot.git / commitdiff