[SCSI] ipr: IOA Status Code(IOASC) update

Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 0d43176..6601e03 100644 (file)
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -281,12 +281,22 @@ struct ipr_error_table_t ipr_error_table[] = {
        "FFF6: Failure prediction threshold exceeded"},
        {0x015D9200, 0, IPR_DEFAULT_LOG_LEVEL,
        "8009: Impending cache battery pack failure"},
+       {0x02040100, 0, 0,
+       "Logical Unit in process of becoming ready"},
+       {0x02040200, 0, 0,
+       "Initializing command required"},
        {0x02040400, 0, 0,
        "34FF: Disk device format in progress"},
+       {0x02040C00, 0, 0,
+       "Logical unit not accessible, target port in unavailable state"},
        {0x02048000, 0, IPR_DEFAULT_LOG_LEVEL,
        "9070: IOA requested reset"},
        {0x023F0000, 0, 0,
        "Synchronization required"},
+       {0x02408500, 0, 0,
+       "IOA microcode download required"},
+       {0x02408600, 0, 0,
+       "Device bus connection is prohibited by host"},
        {0x024E0000, 0, 0,
        "No ready, IOA shutdown"},
        {0x025A0000, 0, 0,
@@ -385,6 +395,8 @@ struct ipr_error_table_t ipr_error_table[] = {
        "4030: Incorrect multipath connection"},
        {0x04679000, 0, IPR_DEFAULT_LOG_LEVEL,
        "4110: Unsupported enclosure function"},
+       {0x04679800, 0, IPR_DEFAULT_LOG_LEVEL,
+       "4120: SAS cable VPD cannot be read"},
        {0x046E0000, 0, IPR_DEFAULT_LOG_LEVEL,
        "FFF4: Command to logical unit failed"},
        {0x05240000, 1, 0,
@@ -407,10 +419,18 @@ struct ipr_error_table_t ipr_error_table[] = {
        "Illegal request, command sequence error"},
        {0x052C8000, 1, 0,
        "Illegal request, dual adapter support not enabled"},
+       {0x052C8100, 1, 0,
+       "Illegal request, another cable connector was physically disabled"},
+       {0x054E8000, 1, 0,
+       "Illegal request, inconsistent group id/group count"},
        {0x06040500, 0, IPR_DEFAULT_LOG_LEVEL,
        "9031: Array protection temporarily suspended, protection resuming"},
        {0x06040600, 0, IPR_DEFAULT_LOG_LEVEL,
        "9040: Array protection temporarily suspended, protection resuming"},
+       {0x060B0100, 0, IPR_DEFAULT_LOG_LEVEL,
+       "4080: IOA exceeded maximum operating temperature"},
+       {0x060B8000, 0, IPR_DEFAULT_LOG_LEVEL,
+       "4085: Service required"},
        {0x06288000, 0, IPR_DEFAULT_LOG_LEVEL,
        "3140: Device bus not ready to ready transition"},
        {0x06290000, 0, IPR_DEFAULT_LOG_LEVEL,
@@ -423,6 +443,8 @@ struct ipr_error_table_t ipr_error_table[] = {
        "FFFB: SCSI bus was reset by another initiator"},
        {0x063F0300, 0, IPR_DEFAULT_LOG_LEVEL,
        "3029: A device replacement has occurred"},
+       {0x063F8300, 0, IPR_DEFAULT_LOG_LEVEL,
+       "4102: Device bus fabric performance degradation"},
        {0x064C8000, 0, IPR_DEFAULT_LOG_LEVEL,
        "9051: IOA cache data exists for a missing or failed device"},
        {0x064C8100, 0, IPR_DEFAULT_LOG_LEVEL,
@@ -445,6 +467,14 @@ struct ipr_error_table_t ipr_error_table[] = {
        "9076: Configuration error, missing remote IOA"},
        {0x06679100, 0, IPR_DEFAULT_LOG_LEVEL,
        "4050: Enclosure does not support a required multipath function"},
+       {0x06679800, 0, IPR_DEFAULT_LOG_LEVEL,
+       "4121: Configuration error, required cable is missing"},
+       {0x06679900, 0, IPR_DEFAULT_LOG_LEVEL,
+       "4122: Cable is not plugged into the correct location on remote IOA"},
+       {0x06679A00, 0, IPR_DEFAULT_LOG_LEVEL,
+       "4123: Configuration error, invalid cable vital product data"},
+       {0x06679B00, 0, IPR_DEFAULT_LOG_LEVEL,
+       "4124: Configuration error, both cable ends are plugged into the same IOA"},
        {0x06690000, 0, IPR_DEFAULT_LOG_LEVEL,
        "4070: Logically bad block written on device"},
        {0x06690200, 0, IPR_DEFAULT_LOG_LEVEL,
@@ -507,10 +537,18 @@ struct ipr_error_table_t ipr_error_table[] = {
        "9062: One or more disks are missing from an array"},
        {0x07279900, 0, IPR_DEFAULT_LOG_LEVEL,
        "9063: Maximum number of functional arrays has been exceeded"},
+       {0x07279A00, 0, 0,
+       "Data protect, other volume set problem"},
        {0x0B260000, 0, 0,
        "Aborted command, invalid descriptor"},
+       {0x0B3F9000, 0, 0,
+       "Target operating conditions have changed, dual adapter takeover"},
+       {0x0B530200, 0, 0,
+       "Aborted command, medium removal prevented"},
        {0x0B5A0000, 0, 0,
-       "Command terminated by host"}
+       "Command terminated by host"},
+       {0x0B5B8000, 0, 0,
+       "Aborted command, command terminated by host"}
 };
 
 static const struct ipr_ses_table_entry ipr_ses_table[] = {