#include "reset-starfive-jh71x0.h"
+#include <dt-bindings/reset/starfive-jh7100.h>
+
+/* register offsets */
+#define JH7100_RESET_ASSERT0 0x00
+#define JH7100_RESET_ASSERT1 0x04
+#define JH7100_RESET_ASSERT2 0x08
+#define JH7100_RESET_ASSERT3 0x0c
+#define JH7100_RESET_STATUS0 0x10
+#define JH7100_RESET_STATUS1 0x14
+#define JH7100_RESET_STATUS2 0x18
+#define JH7100_RESET_STATUS3 0x1c
+
+/*
+ * Writing a 1 to the n'th bit of the m'th ASSERT register asserts
+ * line 32m + n, and writing a 0 deasserts the same line.
+ * Most reset lines have their status inverted so a 0 bit in the STATUS
+ * register means the line is asserted and a 1 means it's deasserted. A few
+ * lines don't though, so store the expected value of the status registers when
+ * all lines are asserted.
+ */
+static const u64 jh7100_reset_asserted[2] = {
+ /* STATUS0 */
+ BIT_ULL_MASK(JH7100_RST_U74) |
+ BIT_ULL_MASK(JH7100_RST_VP6_DRESET) |
+ BIT_ULL_MASK(JH7100_RST_VP6_BRESET) |
+ /* STATUS1 */
+ BIT_ULL_MASK(JH7100_RST_HIFI4_DRESET) |
+ BIT_ULL_MASK(JH7100_RST_HIFI4_BRESET),
+ /* STATUS2 */
+ BIT_ULL_MASK(JH7100_RST_E24) |
+ /* STATUS3 */
+ 0,
+};
+
+static int __init jh7100_reset_probe(struct platform_device *pdev)
+{
+ void __iomem *base = devm_platform_ioremap_resource(pdev, 0);
+
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ return reset_starfive_jh7100_register(&pdev->dev, pdev->dev.of_node,
+ base + JH7100_RESET_ASSERT0,
+ base + JH7100_RESET_STATUS0,
+ jh7100_reset_asserted,
+ JH7100_RSTN_END,
+ THIS_MODULE);
+}
+
static const struct of_device_id jh7100_reset_dt_ids[] = {
{ .compatible = "starfive,jh7100-reset" },
{ /* sentinel */ }
#include <linux/io.h>
#include <linux/io-64-nonatomic-lo-hi.h>
#include <linux/iopoll.h>
-#include <linux/platform_device.h>
#include <linux/reset-controller.h>
#include <linux/spinlock.h>
#include "reset-starfive-jh71x0.h"
-#include <dt-bindings/reset/starfive-jh7100.h>
-
-/* register offsets */
-#define JH7100_RESET_ASSERT0 0x00
-#define JH7100_RESET_ASSERT1 0x04
-#define JH7100_RESET_ASSERT2 0x08
-#define JH7100_RESET_ASSERT3 0x0c
-#define JH7100_RESET_STATUS0 0x10
-#define JH7100_RESET_STATUS1 0x14
-#define JH7100_RESET_STATUS2 0x18
-#define JH7100_RESET_STATUS3 0x1c
-
-/*
- * Writing a 1 to the n'th bit of the m'th ASSERT register asserts
- * line 32m + n, and writing a 0 deasserts the same line.
- * Most reset lines have their status inverted so a 0 bit in the STATUS
- * register means the line is asserted and a 1 means it's deasserted. A few
- * lines don't though, so store the expected value of the status registers when
- * all lines are asserted.
- */
-static const u64 jh7100_reset_asserted[2] = {
- /* STATUS0 */
- BIT_ULL_MASK(JH7100_RST_U74) |
- BIT_ULL_MASK(JH7100_RST_VP6_DRESET) |
- BIT_ULL_MASK(JH7100_RST_VP6_BRESET) |
- /* STATUS1 */
- BIT_ULL_MASK(JH7100_RST_HIFI4_DRESET) |
- BIT_ULL_MASK(JH7100_RST_HIFI4_BRESET),
- /* STATUS2 */
- BIT_ULL_MASK(JH7100_RST_E24) |
- /* STATUS3 */
- 0,
-};
-
struct jh7100_reset {
struct reset_controller_dev rcdev;
/* protect registers against concurrent read-modify-write */
spinlock_t lock;
- void __iomem *base;
+ void __iomem *assert;
+ void __iomem *status;
+ const u64 *asserted;
};
static inline struct jh7100_reset *
struct jh7100_reset *data = jh7100_reset_from(rcdev);
unsigned long offset = BIT_ULL_WORD(id);
u64 mask = BIT_ULL_MASK(id);
- void __iomem *reg_assert = data->base + JH7100_RESET_ASSERT0 + offset * sizeof(u64);
- void __iomem *reg_status = data->base + JH7100_RESET_STATUS0 + offset * sizeof(u64);
- u64 done = jh7100_reset_asserted[offset] & mask;
+ void __iomem *reg_assert = data->assert + offset * sizeof(u64);
+ void __iomem *reg_status = data->status + offset * sizeof(u64);
+ u64 done = data->asserted ? data->asserted[offset] & mask : 0;
u64 value;
unsigned long flags;
int ret;
struct jh7100_reset *data = jh7100_reset_from(rcdev);
unsigned long offset = BIT_ULL_WORD(id);
u64 mask = BIT_ULL_MASK(id);
- void __iomem *reg_status = data->base + JH7100_RESET_STATUS0 + offset * sizeof(u64);
+ void __iomem *reg_status = data->status + offset * sizeof(u64);
u64 value = readq(reg_status);
- return !((value ^ jh7100_reset_asserted[offset]) & mask);
+ return !((value ^ data->asserted[offset]) & mask);
}
static const struct reset_control_ops jh7100_reset_ops = {
.status = jh7100_reset_status,
};
-int jh7100_reset_probe(struct platform_device *pdev)
+int reset_starfive_jh7100_register(struct device *dev, struct device_node *of_node,
+ void __iomem *assert, void __iomem *status,
+ const u64 *asserted, unsigned int nr_resets,
+ struct module *owner)
{
struct jh7100_reset *data;
- data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
- data->base = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(data->base))
- return PTR_ERR(data->base);
-
data->rcdev.ops = &jh7100_reset_ops;
- data->rcdev.owner = THIS_MODULE;
- data->rcdev.nr_resets = JH7100_RSTN_END;
- data->rcdev.dev = &pdev->dev;
- data->rcdev.of_node = pdev->dev.of_node;
+ data->rcdev.owner = owner;
+ data->rcdev.nr_resets = nr_resets;
+ data->rcdev.dev = dev;
+ data->rcdev.of_node = of_node;
+
spin_lock_init(&data->lock);
+ data->assert = assert;
+ data->status = status;
+ data->asserted = asserted;
- return devm_reset_controller_register(&pdev->dev, &data->rcdev);
+ return devm_reset_controller_register(dev, &data->rcdev);
}
-EXPORT_SYMBOL_GPL(jh7100_reset_probe);
+EXPORT_SYMBOL_GPL(reset_starfive_jh7100_register);
projects / platform / kernel / linux-rpi.git / commitdiff