ARM: dts: mmp*: Make the serial ports compatible with xscale-uart

XScale serial port driver is perfectly capable of supporting this hardware. A
separate compatible string is probably a historical mess.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200320174107.29406-7-lkundrak@v3.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index 45372df..da10567 100644 (file)
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -209,7 +209,7 @@
                        };
 
                        uart1: serial@d4030000 {
-                               compatible = "mrvl,mmp-uart";
+                               compatible = "mrvl,mmp-uart", "intel,xscale-uart";
                                reg = <0xd4030000 0x1000>;
                                interrupts = <27>;
                                clocks = <&soc_clocks MMP2_CLK_UART0>;
@@ -219,7 +219,7 @@
                        };
 
                        uart2: serial@d4017000 {
-                               compatible = "mrvl,mmp-uart";
+                               compatible = "mrvl,mmp-uart", "intel,xscale-uart";
                                reg = <0xd4017000 0x1000>;
                                interrupts = <28>;
                                clocks = <&soc_clocks MMP2_CLK_UART1>;
@@ -229,7 +229,7 @@
                        };
 
                        uart3: serial@d4018000 {
-                               compatible = "mrvl,mmp-uart";
+                               compatible = "mrvl,mmp-uart", "intel,xscale-uart";
                                reg = <0xd4018000 0x1000>;
                                interrupts = <24>;
                                clocks = <&soc_clocks MMP2_CLK_UART2>;
@@ -239,7 +239,7 @@
                        };
 
                        uart4: serial@d4016000 {
-                               compatible = "mrvl,mmp-uart";
+                               compatible = "mrvl,mmp-uart", "intel,xscale-uart";
                                reg = <0xd4016000 0x1000>;
                                interrupts = <46>;
                                clocks = <&soc_clocks MMP2_CLK_UART3>;

diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi
index 7a5b996..9b5087a 100644 (file)
--- a/arch/arm/boot/dts/mmp3.dtsi
+++ b/arch/arm/boot/dts/mmp3.dtsi
@@ -319,7 +319,7 @@
                        };
 
                        uart1: serial@d4030000 {
-                               compatible = "mrvl,mmp-uart";
+                               compatible = "mrvl,mmp-uart", "intel,xscale-uart";
                                reg = <0xd4030000 0x1000>;
                                interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
                                clocks = <&soc_clocks MMP2_CLK_UART0>;
@@ -329,7 +329,7 @@
                        };
 
                        uart2: serial@d4017000 {
-                               compatible = "mrvl,mmp-uart";
+                               compatible = "mrvl,mmp-uart", "intel,xscale-uart";
                                reg = <0xd4017000 0x1000>;
                                interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
                                clocks = <&soc_clocks MMP2_CLK_UART1>;
@@ -339,7 +339,7 @@
                        };
 
                        uart3: serial@d4018000 {
-                               compatible = "mrvl,mmp-uart";
+                               compatible = "mrvl,mmp-uart", "intel,xscale-uart";
                                reg = <0xd4018000 0x1000>;
                                interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
                                clocks = <&soc_clocks MMP2_CLK_UART2>;
@@ -349,7 +349,7 @@
                        };
 
                        uart4: serial@d4016000 {
-                               compatible = "mrvl,mmp-uart";
+                               compatible = "mrvl,mmp-uart", "intel,xscale-uart";
                                reg = <0xd4016000 0x1000>;
                                interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
                                clocks = <&soc_clocks MMP2_CLK_UART3>;