mtd: SST25L (non JEDEC) SPI Flash driver
authorRyan Mallon <ryan@bluewatersys.com>
Fri, 18 Sep 2009 19:51:40 +0000 (12:51 -0700)
committerDavid Woodhouse <David.Woodhouse@intel.com>
Sat, 19 Sep 2009 17:54:45 +0000 (10:54 -0700)
Add support for the non JEDEC SST25L SPI Flash devices.

[dwmw2: Some cleanups]

Signed-off-by: Andre Renaud <andre@bluewatersys.com>
Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: "H Hartley Sweeten" <hartleys@visionengravers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
drivers/mtd/devices/Kconfig
drivers/mtd/devices/Makefile
drivers/mtd/devices/sst25l.c [new file with mode: 0644]

index 325fab9..c222514 100644 (file)
@@ -104,6 +104,16 @@ config M25PXX_USE_FAST_READ
        help
          This option enables FAST_READ access supported by ST M25Pxx.
 
+config MTD_SST25L
+       tristate "Support SST25L (non JEDEC) SPI Flash chips"
+       depends on SPI_MASTER
+       help
+         This enables access to the non JEDEC SST25L SPI flash chips, used
+         for program and data storage.
+
+         Set up your spi devices with the right board-specific platform data,
+         if you want to specify device partitioning.
+
 config MTD_SLRAM
        tristate "Uncached system RAM"
        help
index 0993d5c..ab5c9b9 100644 (file)
@@ -16,3 +16,4 @@ obj-$(CONFIG_MTD_LART)                += lart.o
 obj-$(CONFIG_MTD_BLOCK2MTD)    += block2mtd.o
 obj-$(CONFIG_MTD_DATAFLASH)    += mtd_dataflash.o
 obj-$(CONFIG_MTD_M25P80)       += m25p80.o
+obj-$(CONFIG_MTD_SST25L)       += sst25l.o
diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c
new file mode 100644 (file)
index 0000000..ac7d52b
--- /dev/null
@@ -0,0 +1,510 @@
+/*
+ * sst25l.c
+ *
+ * Driver for SST25L SPI Flash chips
+ *
+ * Copyright © 2009 Bluewater Systems Ltd
+ * Author: Andre Renaud <andre@bluewatersys.com>
+ * Author: Ryan Mallon <ryan@bluewatersys.com>
+ *
+ * Based on m25p80.c
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+/* Erases can take up to 3 seconds! */
+#define MAX_READY_WAIT_JIFFIES msecs_to_jiffies(3000)
+
+#define SST25L_CMD_WRSR                0x01    /* Write status register */
+#define SST25L_CMD_WRDI                0x04    /* Write disable */
+#define SST25L_CMD_RDSR                0x05    /* Read status register */
+#define SST25L_CMD_WREN                0x06    /* Write enable */
+#define SST25L_CMD_READ                0x03    /* High speed read */
+
+#define SST25L_CMD_EWSR                0x50    /* Enable write status register */
+#define SST25L_CMD_SECTOR_ERASE        0x20    /* Erase sector */
+#define SST25L_CMD_READ_ID     0x90    /* Read device ID */
+#define SST25L_CMD_AAI_PROGRAM 0xaf    /* Auto address increment */
+
+#define SST25L_STATUS_BUSY     (1 << 0)        /* Chip is busy */
+#define SST25L_STATUS_WREN     (1 << 1)        /* Write enabled */
+#define SST25L_STATUS_BP0      (1 << 2)        /* Block protection 0 */
+#define SST25L_STATUS_BP1      (1 << 3)        /* Block protection 1 */
+
+struct sst25l_flash {
+       struct spi_device       *spi;
+       struct mutex            lock;
+       struct mtd_info         mtd;
+
+       int                     partitioned;
+};
+
+struct flash_info {
+       const char              *name;
+       uint16_t                device_id;
+       unsigned                page_size;
+       unsigned                nr_pages;
+       unsigned                erase_size;
+};
+
+#define to_sst25l_flash(x) container_of(x, struct sst25l_flash, mtd)
+
+static struct flash_info __initdata sst25l_flash_info[] = {
+       {"sst25lf020a", 0xbf43, 256, 1024, 4096},
+       {"sst25lf040a", 0xbf44, 256, 2048, 4096},
+};
+
+static int sst25l_status(struct sst25l_flash *flash, int *status)
+{
+       unsigned char command, response;
+       int err;
+
+       command = SST25L_CMD_RDSR;
+       err = spi_write_then_read(flash->spi, &command, 1, &response, 1);
+       if (err < 0)
+               return err;
+
+       *status = response;
+       return 0;
+}
+
+static int sst25l_write_enable(struct sst25l_flash *flash, int enable)
+{
+       unsigned char command[2];
+       int status, err;
+
+       command[0] = enable ? SST25L_CMD_WREN : SST25L_CMD_WRDI;
+       err = spi_write(flash->spi, command, 1);
+       if (err)
+               return err;
+
+       command[0] = SST25L_CMD_EWSR;
+       err = spi_write(flash->spi, command, 1);
+       if (err)
+               return err;
+
+       command[0] = SST25L_CMD_WRSR;
+       command[1] = enable ? 0 : SST25L_STATUS_BP0 | SST25L_STATUS_BP1;
+       err = spi_write(flash->spi, command, 2);
+       if (err)
+               return err;
+
+       if (enable) {
+               err = sst25l_status(flash, &status);
+               if (err)
+                       return err;
+               if (!(status & SST25L_STATUS_WREN))
+                       return -EROFS;
+       }
+
+       return 0;
+}
+
+static int sst25l_wait_till_ready(struct sst25l_flash *flash)
+{
+       unsigned long deadline;
+       int status, err;
+
+       deadline = jiffies + MAX_READY_WAIT_JIFFIES;
+       do {
+               err = sst25l_status(flash, &status);
+               if (err)
+                       return err;
+               if (!(status & SST25L_STATUS_BUSY))
+                       return 0;
+
+               cond_resched();
+       } while (!time_after_eq(jiffies, deadline));
+
+       return -ETIMEDOUT;
+}
+
+static int sst25l_erase_sector(struct sst25l_flash *flash, uint32_t offset)
+{
+       unsigned char command[4];
+       int err;
+
+       err = sst25l_write_enable(flash, 1);
+       if (err)
+               return err;
+
+       command[0] = SST25L_CMD_SECTOR_ERASE;
+       command[1] = offset >> 16;
+       command[2] = offset >> 8;
+       command[3] = offset;
+       err = spi_write(flash->spi, command, 4);
+       if (err)
+               return err;
+
+       err = sst25l_wait_till_ready(flash);
+       if (err)
+               return err;
+
+       return sst25l_write_enable(flash, 0);
+}
+
+static int sst25l_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+       struct sst25l_flash *flash = to_sst25l_flash(mtd);
+       uint32_t addr, end;
+       int err;
+
+       /* Sanity checks */
+       if (instr->addr + instr->len > flash->mtd.size)
+               return -EINVAL;
+
+       if ((uint32_t)instr->len % mtd->erasesize)
+               return -EINVAL;
+
+       if ((uint32_t)instr->addr % mtd->erasesize)
+               return -EINVAL;
+
+       addr = instr->addr;
+       end = addr + instr->len;
+
+       mutex_lock(&flash->lock);
+
+       err = sst25l_wait_till_ready(flash);
+       if (err)
+               return err;
+
+       while (addr < end) {
+               err = sst25l_erase_sector(flash, addr);
+               if (err) {
+                       mutex_unlock(&flash->lock);
+                       instr->state = MTD_ERASE_FAILED;
+                       dev_err(&flash->spi->dev, "Erase failed\n");
+                       return err;
+               }
+
+               addr += mtd->erasesize;
+       }
+
+       mutex_unlock(&flash->lock);
+
+       instr->state = MTD_ERASE_DONE;
+       mtd_erase_callback(instr);
+       return 0;
+}
+
+static int sst25l_read(struct mtd_info *mtd, loff_t from, size_t len,
+                      size_t *retlen, unsigned char *buf)
+{
+       struct sst25l_flash *flash = to_sst25l_flash(mtd);
+       struct spi_transfer transfer[2];
+       struct spi_message message;
+       unsigned char command[4];
+       int ret;
+
+       /* Sanity checking */
+       if (len == 0)
+               return 0;
+
+       if (from + len > flash->mtd.size)
+               return -EINVAL;
+
+       if (retlen)
+               *retlen = 0;
+
+       spi_message_init(&message);
+       memset(&transfer, 0, sizeof(transfer));
+
+       command[0] = SST25L_CMD_READ;
+       command[1] = from >> 16;
+       command[2] = from >> 8;
+       command[3] = from;
+
+       transfer[0].tx_buf = command;
+       transfer[0].len = sizeof(command);
+       spi_message_add_tail(&transfer[0], &message);
+
+       transfer[1].rx_buf = buf;
+       transfer[1].len = len;
+       spi_message_add_tail(&transfer[1], &message);
+
+       mutex_lock(&flash->lock);
+
+       /* Wait for previous write/erase to complete */
+       ret = sst25l_wait_till_ready(flash);
+       if (ret) {
+               mutex_unlock(&flash->lock);
+               return ret;
+       }
+
+       spi_sync(flash->spi, &message);
+
+       if (retlen && message.actual_length > sizeof(command))
+               *retlen += message.actual_length - sizeof(command);
+
+       mutex_unlock(&flash->lock);
+       return 0;
+}
+
+static int sst25l_write(struct mtd_info *mtd, loff_t to, size_t len,
+                       size_t *retlen, const unsigned char *buf)
+{
+       struct sst25l_flash *flash = to_sst25l_flash(mtd);
+       int i, j, ret, bytes, copied = 0;
+       unsigned char command[5];
+
+       /* Sanity checks */
+       if (!len)
+               return 0;
+
+       if (to + len > flash->mtd.size)
+               return -EINVAL;
+
+       if ((uint32_t)to % mtd->writesize)
+               return -EINVAL;
+
+       mutex_lock(&flash->lock);
+
+       ret = sst25l_write_enable(flash, 1);
+       if (ret)
+               goto out;
+
+       for (i = 0; i < len; i += mtd->writesize) {
+               ret = sst25l_wait_till_ready(flash);
+               if (ret)
+                       goto out;
+
+               /* Write the first byte of the page */
+               command[0] = SST25L_CMD_AAI_PROGRAM;
+               command[1] = (to + i) >> 16;
+               command[2] = (to + i) >> 8;
+               command[3] = (to + i);
+               command[4] = buf[i];
+               ret = spi_write(flash->spi, command, 5);
+               if (ret < 0)
+                       goto out;
+               copied++;
+
+               /*
+                * Write the remaining bytes using auto address
+                * increment mode
+                */
+               bytes = min_t(uint32_t, mtd->writesize, len - i);
+               for (j = 1; j < bytes; j++, copied++) {
+                       ret = sst25l_wait_till_ready(flash);
+                       if (ret)
+                               goto out;
+
+                       command[1] = buf[i + j];
+                       ret = spi_write(flash->spi, command, 2);
+                       if (ret)
+                               goto out;
+               }
+       }
+
+out:
+       ret = sst25l_write_enable(flash, 0);
+
+       if (retlen)
+               *retlen = copied;
+
+       mutex_unlock(&flash->lock);
+       return ret;
+}
+
+static struct flash_info *__init sst25l_match_device(struct spi_device *spi)
+{
+       struct flash_info *flash_info = NULL;
+       unsigned char command[4], response;
+       int i, err;
+       uint16_t id;
+
+       command[0] = SST25L_CMD_READ_ID;
+       command[1] = 0;
+       command[2] = 0;
+       command[3] = 0;
+       err = spi_write_then_read(spi, command, sizeof(command), &response, 1);
+       if (err < 0) {
+               dev_err(&spi->dev, "error reading device id msb\n");
+               return NULL;
+       }
+
+       id = response << 8;
+
+       command[0] = SST25L_CMD_READ_ID;
+       command[1] = 0;
+       command[2] = 0;
+       command[3] = 1;
+       err = spi_write_then_read(spi, command, sizeof(command), &response, 1);
+       if (err < 0) {
+               dev_err(&spi->dev, "error reading device id lsb\n");
+               return NULL;
+       }
+
+       id |= response;
+
+       for (i = 0; i < ARRAY_SIZE(sst25l_flash_info); i++)
+               if (sst25l_flash_info[i].device_id == id)
+                       flash_info = &sst25l_flash_info[i];
+
+       if (!flash_info)
+               dev_err(&spi->dev, "unknown id %.4x\n", id);
+
+       return flash_info;
+}
+
+static int __init sst25l_probe(struct spi_device *spi)
+{
+       struct flash_info *flash_info;
+       struct sst25l_flash *flash;
+       struct flash_platform_data *data;
+       int ret, i;
+
+       flash_info = sst25l_match_device(spi);
+       if (!flash_info)
+               return -ENODEV;
+
+       flash = kzalloc(sizeof(struct sst25l_flash), GFP_KERNEL);
+       if (!flash)
+               return -ENOMEM;
+
+       flash->spi = spi;
+       mutex_init(&flash->lock);
+       dev_set_drvdata(&spi->dev, flash);
+
+       data = spi->dev.platform_data;
+       if (data && data->name)
+               flash->mtd.name = data->name;
+       else
+               flash->mtd.name = dev_name(&spi->dev);
+
+       flash->mtd.type         = MTD_NORFLASH;
+       flash->mtd.flags        = MTD_CAP_NORFLASH;
+       flash->mtd.erasesize    = flash_info->erase_size;
+       flash->mtd.writesize    = flash_info->page_size;
+       flash->mtd.size         = flash_info->page_size * flash_info->nr_pages;
+       flash->mtd.erase        = sst25l_erase;
+       flash->mtd.read         = sst25l_read;
+       flash->mtd.write        = sst25l_write;
+
+       dev_info(&spi->dev, "%s (%lld KiB)\n", flash_info->name,
+                (long long)flash->mtd.size >> 10);
+
+       DEBUG(MTD_DEBUG_LEVEL2,
+             "mtd .name = %s, .size = 0x%llx (%lldMiB) "
+             ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
+             flash->mtd.name,
+             (long long)flash->mtd.size, (long long)(flash->mtd.size >> 20),
+             flash->mtd.erasesize, flash->mtd.erasesize / 1024,
+             flash->mtd.numeraseregions);
+
+       if (flash->mtd.numeraseregions)
+               for (i = 0; i < flash->mtd.numeraseregions; i++)
+                       DEBUG(MTD_DEBUG_LEVEL2,
+                             "mtd.eraseregions[%d] = { .offset = 0x%llx, "
+                             ".erasesize = 0x%.8x (%uKiB), "
+                             ".numblocks = %d }\n",
+                             i, (long long)flash->mtd.eraseregions[i].offset,
+                             flash->mtd.eraseregions[i].erasesize,
+                             flash->mtd.eraseregions[i].erasesize / 1024,
+                             flash->mtd.eraseregions[i].numblocks);
+
+       if (mtd_has_partitions()) {
+               struct mtd_partition *parts = NULL;
+               int nr_parts = 0;
+
+               if (mtd_has_cmdlinepart()) {
+                       static const char *part_probes[] =
+                               {"cmdlinepart", NULL};
+
+                       nr_parts = parse_mtd_partitions(&flash->mtd,
+                                                       part_probes,
+                                                       &parts, 0);
+               }
+
+               if (nr_parts <= 0 && data && data->parts) {
+                       parts = data->parts;
+                       nr_parts = data->nr_parts;
+               }
+
+               if (nr_parts > 0) {
+                       for (i = 0; i < nr_parts; i++) {
+                               DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = "
+                                     "{.name = %s, .offset = 0x%llx, "
+                                     ".size = 0x%llx (%lldKiB) }\n",
+                                     i, parts[i].name,
+                                     (long long)parts[i].offset,
+                                     (long long)parts[i].size,
+                                     (long long)(parts[i].size >> 10));
+                       }
+
+                       flash->partitioned = 1;
+                       return add_mtd_partitions(&flash->mtd,
+                                                 parts, nr_parts);
+               }
+
+       } else if (data->nr_parts) {
+               dev_warn(&spi->dev, "ignoring %d default partitions on %s\n",
+                        data->nr_parts, data->name);
+       }
+
+       ret = add_mtd_device(&flash->mtd);
+       if (ret == 1) {
+               kfree(flash);
+               dev_set_drvdata(&spi->dev, NULL);
+               return -ENODEV;
+       }
+
+       return 0;
+}
+
+static int __exit sst25l_remove(struct spi_device *spi)
+{
+       struct sst25l_flash *flash = dev_get_drvdata(&spi->dev);
+       int ret;
+
+       if (mtd_has_partitions() && flash->partitioned)
+               ret = del_mtd_partitions(&flash->mtd);
+       else
+               ret = del_mtd_device(&flash->mtd);
+       if (ret == 0)
+               kfree(flash);
+       return ret;
+}
+
+static struct spi_driver sst25l_driver = {
+       .driver = {
+               .name   = "sst25l",
+               .bus    = &spi_bus_type,
+               .owner  = THIS_MODULE,
+       },
+       .probe          = sst25l_probe,
+       .remove         = __exit_p(sst25l_remove),
+};
+
+static int __init sst25l_init(void)
+{
+       return spi_register_driver(&sst25l_driver);
+}
+
+static void __exit sst25l_exit(void)
+{
+       spi_unregister_driver(&sst25l_driver);
+}
+
+module_init(sst25l_init);
+module_exit(sst25l_exit);
+
+MODULE_DESCRIPTION("MTD SPI driver for SST25L Flash chips");
+MODULE_AUTHOR("Andre Renaud <andre@bluewatersys.com>, "
+             "Ryan Mallon <ryan@bluewatersys.com>");
+MODULE_LICENSE("GPL");