ARM: shmobile: Sync Marzen DTS with Marzen reference DTS

Copy the device nodes from Marzen reference into the Marzen device tree
file. This will allow us to use a single DTS file regardless of kernel
configuration. In case of legacy C board code the device nodes may or
may not be used, but in the multiplatform case all the DT device nodes
will be used.

Based on a similar change for the Lager board by Laurent Pinchart.

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit bedd672409d68c98e717ac79f58b0ba155879275)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
index ee23388..cf90d2d 100644 (file)
--- a/arch/arm/boot/dts/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -11,6 +11,8 @@
 
 /dts-v1/;
 #include "r8a7779.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
        model = "marzen";
@@ -24,4 +26,96 @@
                device_type = "memory";
                reg = <0x60000000 0x40000000>;
        };
+
+       fixedregulator3v3: fixedregulator@0 {
+               compatible = "regulator-fixed";
+               regulator-name = "fixed-3.3V";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               regulator-boot-on;
+               regulator-always-on;
+       };
+
+       lan0@18000000 {
+               compatible = "smsc,lan9220", "smsc,lan9115";
+               reg = <0x18000000 0x100>;
+               pinctrl-0 = <&lan0_pins>;
+               pinctrl-names = "default";
+
+               phy-mode = "mii";
+               interrupt-parent = <&irqpin0>;
+               interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+               smsc,irq-push-pull;
+               reg-io-width = <4>;
+               vddvario-supply = <&fixedregulator3v3>;
+               vdd33a-supply = <&fixedregulator3v3>;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               led2 {
+                       gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+               };
+               led3 {
+                       gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+               };
+               led4 {
+                       gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
+               };
+       };
+};
+
+&irqpin0 {
+       status = "okay";
+};
+
+&pfc {
+       pinctrl-0 = <&scif2_pins &scif4_pins>;
+       pinctrl-names = "default";
+
+       lan0_pins: lan0 {
+               intc {
+                       renesas,groups = "intc_irq1_b";
+                       renesas,function = "intc";
+               };
+               lbsc {
+                       renesas,groups = "lbsc_ex_cs0";
+                       renesas,function = "lbsc";
+               };
+       };
+
+       scif2_pins: serial2 {
+               renesas,groups = "scif2_data_c";
+               renesas,function = "scif2";
+       };
+
+       scif4_pins: serial4 {
+               renesas,groups = "scif4_data";
+               renesas,function = "scif4";
+       };
+
+       sdhi0_pins: sd0 {
+               renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
+               renesas,function = "sdhi0";
+       };
+
+       hspi0_pins: hspi0 {
+               renesas,groups = "hspi0";
+               renesas,function = "hspi0";
+       };
+};
+
+&sdhi0 {
+       pinctrl-0 = <&sdhi0_pins>;
+       pinctrl-names = "default";
+
+       vmmc-supply = <&fixedregulator3v3>;
+       bus-width = <4>;
+       status = "okay";
+};
+
+&hspi0 {
+       pinctrl-0 = <&hspi0_pins>;
+       pinctrl-names = "default";
+       status = "okay";
 };