Staging: rt28x0: fix comments in common/*.c files
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Fri, 11 Dec 2009 20:23:15 +0000 (12:23 -0800)
committerGreg Kroah-Hartman <gregkh@suse.de>
Fri, 11 Dec 2009 20:23:15 +0000 (12:23 -0800)
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
26 files changed:
drivers/staging/rt2860/common/action.c
drivers/staging/rt2860/common/ba_action.c
drivers/staging/rt2860/common/cmm_aes.c
drivers/staging/rt2860/common/cmm_asic.c
drivers/staging/rt2860/common/cmm_cfg.c
drivers/staging/rt2860/common/cmm_data.c
drivers/staging/rt2860/common/cmm_data_pci.c
drivers/staging/rt2860/common/cmm_data_usb.c
drivers/staging/rt2860/common/cmm_info.c
drivers/staging/rt2860/common/cmm_mac_pci.c
drivers/staging/rt2860/common/cmm_mac_usb.c
drivers/staging/rt2860/common/cmm_sanity.c
drivers/staging/rt2860/common/cmm_sync.c
drivers/staging/rt2860/common/cmm_tkip.c
drivers/staging/rt2860/common/cmm_wep.c
drivers/staging/rt2860/common/cmm_wpa.c
drivers/staging/rt2860/common/ee_efuse.c
drivers/staging/rt2860/common/ee_prom.c
drivers/staging/rt2860/common/eeprom.c
drivers/staging/rt2860/common/mlme.c
drivers/staging/rt2860/common/rt_channel.c
drivers/staging/rt2860/common/rt_rf.c
drivers/staging/rt2860/common/rtmp_init.c
drivers/staging/rt2860/common/rtmp_mcu.c
drivers/staging/rt2860/common/rtmp_timer.c
drivers/staging/rt2860/common/spectrum.c

index f6efdb6..f69681d 100644 (file)
@@ -113,13 +113,13 @@ VOID MlmeADDBAAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
        NdisZeroMemory(&Frame, sizeof(FRAME_ADDBA_REQ));
 
        if (MlmeAddBAReqSanity(pAd, Elem->Msg, Elem->MsgLen, Addr)) {
-               NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); //Get an unused nonpaged memory
+               NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); /*Get an unused nonpaged memory */
                if (NStatus != NDIS_STATUS_SUCCESS) {
                        DBGPRINT(RT_DEBUG_TRACE,
                                 ("BA - MlmeADDBAAction() allocate memory failed \n"));
                        return;
                }
-               // 1. find entry
+               /* 1. find entry */
                Idx =
                    pAd->MacTab.Content[pInfo->Wcid].BAOriWcidArray[pInfo->TID];
                if (Idx == 0) {
@@ -200,27 +200,27 @@ VOID MlmeDELBAAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
        FRAME_BAR FrameBar;
 
        pInfo = (MLME_DELBA_REQ_STRUCT *) Elem->Msg;
-       // must send back DELBA
+       /* must send back DELBA */
        NdisZeroMemory(&Frame, sizeof(FRAME_DELBA_REQ));
        DBGPRINT(RT_DEBUG_TRACE,
                 ("==> MlmeDELBAAction(), Initiator(%d) \n", pInfo->Initiator));
 
        if (MlmeDelBAReqSanity(pAd, Elem->Msg, Elem->MsgLen)) {
-               NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); //Get an unused nonpaged memory
+               NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); /*Get an unused nonpaged memory */
                if (NStatus != NDIS_STATUS_SUCCESS) {
                        DBGPRINT(RT_DEBUG_ERROR,
                                 ("BA - MlmeDELBAAction() allocate memory failed 1. \n"));
                        return;
                }
 
-               NStatus = MlmeAllocateMemory(pAd, &pOutBuffer2);        //Get an unused nonpaged memory
+               NStatus = MlmeAllocateMemory(pAd, &pOutBuffer2);        /*Get an unused nonpaged memory */
                if (NStatus != NDIS_STATUS_SUCCESS) {
                        MlmeFreeMemory(pAd, pOutBuffer);
                        DBGPRINT(RT_DEBUG_ERROR,
                                 ("BA - MlmeDELBAAction() allocate memory failed 2. \n"));
                        return;
                }
-               // SEND BAR (Send BAR to refresh peer reordering buffer.)
+               /* SEND BAR (Send BAR to refresh peer reordering buffer.) */
                Idx =
                    pAd->MacTab.Content[pInfo->Wcid].BAOriWcidArray[pInfo->TID];
 
@@ -228,12 +228,12 @@ VOID MlmeDELBAAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
                              pAd->MacTab.Content[pInfo->Wcid].Addr,
                              pAd->CurrentAddress);
 
-               FrameBar.StartingSeq.field.FragNum = 0; // make sure sequence not clear in DEL funciton.
-               FrameBar.StartingSeq.field.StartSeq = pAd->MacTab.Content[pInfo->Wcid].TxSeq[pInfo->TID];       // make sure sequence not clear in DEL funciton.
-               FrameBar.BarControl.TID = pInfo->TID;   // make sure sequence not clear in DEL funciton.
-               FrameBar.BarControl.ACKPolicy = IMMED_BA;       // make sure sequence not clear in DEL funciton.
-               FrameBar.BarControl.Compressed = 1;     // make sure sequence not clear in DEL funciton.
-               FrameBar.BarControl.MTID = 0;   // make sure sequence not clear in DEL funciton.
+               FrameBar.StartingSeq.field.FragNum = 0; /* make sure sequence not clear in DEL funciton. */
+               FrameBar.StartingSeq.field.StartSeq = pAd->MacTab.Content[pInfo->Wcid].TxSeq[pInfo->TID];       /* make sure sequence not clear in DEL funciton. */
+               FrameBar.BarControl.TID = pInfo->TID;   /* make sure sequence not clear in DEL funciton. */
+               FrameBar.BarControl.ACKPolicy = IMMED_BA;       /* make sure sequence not clear in DEL funciton. */
+               FrameBar.BarControl.Compressed = 1;     /* make sure sequence not clear in DEL funciton. */
+               FrameBar.BarControl.MTID = 0;   /* make sure sequence not clear in DEL funciton. */
 
                MakeOutgoingFrame(pOutBuffer2, &FrameLen,
                                  sizeof(FRAME_BAR), &FrameBar, END_OF_ARGS);
@@ -242,7 +242,7 @@ VOID MlmeDELBAAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
                DBGPRINT(RT_DEBUG_TRACE,
                         ("BA - MlmeDELBAAction() . Send BAR to refresh peer reordering buffer \n"));
 
-               // SEND DELBA FRAME
+               /* SEND DELBA FRAME */
                FrameLen = 0;
 
                {
@@ -263,7 +263,7 @@ VOID MlmeDELBAAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
                Frame.Action = DELBA;
                Frame.DelbaParm.Initiator = pInfo->Initiator;
                Frame.DelbaParm.TID = pInfo->TID;
-               Frame.ReasonCode = 39;  // Time Out
+               Frame.ReasonCode = 39;  /* Time Out */
                *(USHORT *) (&Frame.DelbaParm) =
                    cpu2le16(*(USHORT *) (&Frame.DelbaParm));
                Frame.ReasonCode = cpu2le16(Frame.ReasonCode);
@@ -288,8 +288,8 @@ VOID MlmeDLSAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 
 VOID MlmeInvalidAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 {
-       //PUCHAR                   pOutBuffer = NULL;
-       //Return the receiving frame except the MSB of category filed set to 1.  7.3.1.11
+       /*PUCHAR                   pOutBuffer = NULL; */
+       /*Return the receiving frame except the MSB of category filed set to 1.  7.3.1.11 */
 }
 
 VOID PeerQOSAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
@@ -347,20 +347,20 @@ static VOID respond_ht_information_exchange_action(IN PRTMP_ADAPTER pAd,
        FRAME_HT_INFO HTINFOframe, *pFrame;
        UCHAR *pAddr;
 
-       // 2. Always send back ADDBA Response
-       NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); //Get an unused nonpaged memory
+       /* 2. Always send back ADDBA Response */
+       NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); /*Get an unused nonpaged memory */
 
        if (NStatus != NDIS_STATUS_SUCCESS) {
                DBGPRINT(RT_DEBUG_TRACE,
                         ("ACTION - respond_ht_information_exchange_action() allocate memory failed \n"));
                return;
        }
-       // get RA
+       /* get RA */
        pFrame = (FRAME_HT_INFO *) & Elem->Msg[0];
        pAddr = pFrame->Hdr.Addr2;
 
        NdisZeroMemory(&HTINFOframe, sizeof(FRAME_HT_INFO));
-       // 2-1. Prepare ADDBA Response frame.
+       /* 2-1. Prepare ADDBA Response frame. */
        {
                if (ADHOC_ON(pAd))
                        ActHeaderInit(pAd, &HTINFOframe.Hdr, pAddr,
@@ -400,21 +400,21 @@ VOID PeerHTAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
                         ("ACTION - HT Notify Channel bandwidth action----> \n"));
 
                if (pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) {
-                       // Note, this is to patch DIR-1353 AP. When the AP set to Wep, it will use legacy mode. But AP still keeps
-                       // sending BW_Notify Action frame, and cause us to linkup and linkdown.
-                       // In legacy mode, don't need to parse HT action frame.
+                       /* Note, this is to patch DIR-1353 AP. When the AP set to Wep, it will use legacy mode. But AP still keeps */
+                       /* sending BW_Notify Action frame, and cause us to linkup and linkdown. */
+                       /* In legacy mode, don't need to parse HT action frame. */
                        DBGPRINT(RT_DEBUG_TRACE,
                                 ("ACTION -Ignore HT Notify Channel BW when link as legacy mode. BW = %d---> \n",
                                  Elem->Msg[LENGTH_802_11 + 2]));
                        break;
                }
 
-               if (Elem->Msg[LENGTH_802_11 + 2] == 0)  // 7.4.8.2. if value is 1, keep the same as supported channel bandwidth.
+               if (Elem->Msg[LENGTH_802_11 + 2] == 0)  /* 7.4.8.2. if value is 1, keep the same as supported channel bandwidth. */
                        pAd->MacTab.Content[Elem->Wcid].HTPhyMode.field.BW = 0;
 
                break;
        case SMPS_ACTION:
-               // 7.3.1.25
+               /* 7.3.1.25 */
                DBGPRINT(RT_DEBUG_TRACE, ("ACTION - SMPS action----> \n"));
                if (((Elem->Msg[LENGTH_802_11 + 2] & 0x1) == 0)) {
                        pAd->MacTab.Content[Elem->Wcid].MmpsMode = MMPS_ENABLE;
@@ -427,7 +427,7 @@ VOID PeerHTAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
                DBGPRINT(RT_DEBUG_TRACE,
                         ("Aid(%d) MIMO PS = %d\n", Elem->Wcid,
                          pAd->MacTab.Content[Elem->Wcid].MmpsMode));
-               // rt2860c : add something for smps change.
+               /* rt2860c : add something for smps change. */
                break;
 
        case SETPCO_ACTION:
@@ -441,7 +441,7 @@ VOID PeerHTAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
                        pHT_info =
                            (HT_INFORMATION_OCTET *) & Elem->Msg[LENGTH_802_11 +
                                                                 2];
-                       // 7.4.8.10
+                       /* 7.4.8.10 */
                        DBGPRINT(RT_DEBUG_TRACE,
                                 ("ACTION - HT Information Exchange action----> \n"));
                        if (pHT_info->Request) {
@@ -512,7 +512,7 @@ VOID SendRefreshBAR(IN PRTMP_ADAPTER pAd, IN MAC_TABLE_ENTRY * pEntry)
 
                        ASSERT(pBAEntry->Wcid < MAX_LEN_OF_MAC_TABLE);
 
-                       NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); //Get an unused nonpaged memory
+                       NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); /*Get an unused nonpaged memory */
                        if (NStatus != NDIS_STATUS_SUCCESS) {
                                DBGPRINT(RT_DEBUG_ERROR,
                                         ("BA - MlmeADDBAAction() allocate memory failed \n"));
@@ -524,17 +524,17 @@ VOID SendRefreshBAR(IN PRTMP_ADAPTER pAd, IN MAC_TABLE_ENTRY * pEntry)
                        BarHeaderInit(pAd, &FrameBar, pEntry->Addr,
                                      pAd->CurrentAddress);
 
-                       FrameBar.StartingSeq.field.FragNum = 0; // make sure sequence not clear in DEL function.
-                       FrameBar.StartingSeq.field.StartSeq = Sequence; // make sure sequence not clear in DEL funciton.
-                       FrameBar.BarControl.TID = TID;  // make sure sequence not clear in DEL funciton.
+                       FrameBar.StartingSeq.field.FragNum = 0; /* make sure sequence not clear in DEL function. */
+                       FrameBar.StartingSeq.field.StartSeq = Sequence; /* make sure sequence not clear in DEL funciton. */
+                       FrameBar.BarControl.TID = TID;  /* make sure sequence not clear in DEL funciton. */
 
                        MakeOutgoingFrame(pOutBuffer, &FrameLen,
                                          sizeof(FRAME_BAR), &FrameBar,
                                          END_OF_ARGS);
-                       //if (!(CLIENT_STATUS_TEST_FLAG(pEntry, fCLIENT_STATUS_RALINK_CHIPSET)))
-                       if (1)  // Now we always send BAR.
+                       /*if (!(CLIENT_STATUS_TEST_FLAG(pEntry, fCLIENT_STATUS_RALINK_CHIPSET))) */
+                       if (1)  /* Now we always send BAR. */
                        {
-                               //MiniportMMRequestUnlock(pAd, 0, pOutBuffer, FrameLen);
+                               /*MiniportMMRequestUnlock(pAd, 0, pOutBuffer, FrameLen); */
                                MiniportMMRequest(pAd,
                                                  (MGMT_USE_QUEUE_FLAG |
                                                   MapUserPriorityToAccessCategory
index dedbe52..97cb40a 100644 (file)
 
 #include "../rt_config.h"
 
-#define BA_ORI_INIT_SEQ                (pEntry->TxSeq[TID])    //1                        // inital sequence number of BA session
+#define BA_ORI_INIT_SEQ                (pEntry->TxSeq[TID])    /*1                        // inital sequence number of BA session */
 
 #define ORI_SESSION_MAX_RETRY  8
-#define ORI_BA_SESSION_TIMEOUT (2000)  // ms
-#define REC_BA_SESSION_IDLE_TIMEOUT    (1000)  // ms
+#define ORI_BA_SESSION_TIMEOUT (2000)  /* ms */
+#define REC_BA_SESSION_IDLE_TIMEOUT    (1000)  /* ms */
 
-#define REORDERING_PACKET_TIMEOUT              ((100 * OS_HZ)/1000)    // system ticks -- 100 ms
-#define MAX_REORDERING_PACKET_TIMEOUT  ((3000 * OS_HZ)/1000)   // system ticks -- 100 ms
+#define REORDERING_PACKET_TIMEOUT              ((100 * OS_HZ)/1000)    /* system ticks -- 100 ms */
+#define MAX_REORDERING_PACKET_TIMEOUT  ((3000 * OS_HZ)/1000)   /* system ticks -- 100 ms */
 
 #define RESET_RCV_SEQ          (0xFFFF)
 
@@ -66,20 +66,20 @@ VOID BA_MaxWinSizeReasign(IN PRTMP_ADAPTER pAd,
 {
        UCHAR MaxSize;
 
-       if (pAd->MACVersion >= RALINK_2883_VERSION)     // 3*3
+       if (pAd->MACVersion >= RALINK_2883_VERSION)     /* 3*3 */
        {
                if (pAd->MACVersion >= RALINK_3070_VERSION) {
                        if (pEntryPeer->WepStatus !=
                            Ndis802_11EncryptionDisabled)
-                               MaxSize = 7;    // for non-open mode
+                               MaxSize = 7;    /* for non-open mode */
                        else
                                MaxSize = 13;
                } else
                        MaxSize = 31;
-       } else if (pAd->MACVersion >= RALINK_2880E_VERSION)     // 2880 e
+       } else if (pAd->MACVersion >= RALINK_2880E_VERSION)     /* 2880 e */
        {
                if (pEntryPeer->WepStatus != Ndis802_11EncryptionDisabled)
-                       MaxSize = 7;    // for non-open mode
+                       MaxSize = 7;    /* for non-open mode */
                else
                        MaxSize = 13;
        } else
@@ -108,9 +108,9 @@ void Announce_Reordering_Packet(IN PRTMP_ADAPTER pAd,
                ASSERT(0);
                BA_Reorder_AMSDU_Annnounce(pAd, pPacket);
        } else {
-               //
-               // pass this 802.3 packet to upper layer or forward this packet to WM directly
-               //
+               /* */
+               /* pass this 802.3 packet to upper layer or forward this packet to WM directly */
+               /* */
 
                ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pPacket,
                                                 RTMP_GET_PACKET_IF(pPacket));
@@ -275,7 +275,7 @@ BOOLEAN ba_reordering_resource_init(PRTMP_ADAPTER pAd, int num)
        return (TRUE);
 }
 
-//static int blk_count=0; // sample take off, no use
+/*static int blk_count=0; // sample take off, no use */
 
 static struct reordering_mpdu *ba_mpdu_blk_alloc(PRTMP_ADAPTER pAd)
 {
@@ -284,7 +284,7 @@ static struct reordering_mpdu *ba_mpdu_blk_alloc(PRTMP_ADAPTER pAd)
        NdisAcquireSpinLock(&pAd->mpdu_blk_pool.lock);
        mpdu_blk = ba_dequeue(&pAd->mpdu_blk_pool.freelist);
        if (mpdu_blk) {
-//              blk_count++;
+/*              blk_count++; */
                /* reset mpdu_blk */
                NdisZeroMemory(mpdu_blk, sizeof(struct reordering_mpdu));
        }
@@ -298,7 +298,7 @@ static void ba_mpdu_blk_free(PRTMP_ADAPTER pAd,
        ASSERT(mpdu_blk);
 
        NdisAcquireSpinLock(&pAd->mpdu_blk_pool.lock);
-//      blk_count--;
+/*      blk_count--; */
        ba_enqueue(&pAd->mpdu_blk_pool.freelist, mpdu_blk);
        NdisReleaseSpinLock(&pAd->mpdu_blk_pool.lock);
 }
@@ -380,17 +380,17 @@ static void ba_refresh_reordering_mpdus(IN PRTMP_ADAPTER pAd,
        NdisReleaseSpinLock(&pBAEntry->RxReRingLock);
 }
 
-//static
+/*static */
 void ba_flush_reordering_timeout_mpdus(IN PRTMP_ADAPTER pAd,
                                       IN PBA_REC_ENTRY pBAEntry,
                                       IN ULONG Now32)
 {
        USHORT Sequence;
 
-//      if ((RTMP_TIME_AFTER((unsigned long)Now32, (unsigned long)(pBAEntry->LastIndSeqAtTimer+REORDERING_PACKET_TIMEOUT)) &&
-//               (pBAEntry->list.qlen > ((pBAEntry->BAWinSize*7)/8))) //||
-//              (RTMP_TIME_AFTER((unsigned long)Now32, (unsigned long)(pBAEntry->LastIndSeqAtTimer+(10*REORDERING_PACKET_TIMEOUT))) &&
-//               (pBAEntry->list.qlen > (pBAEntry->BAWinSize/8)))
+/*      if ((RTMP_TIME_AFTER((unsigned long)Now32, (unsigned long)(pBAEntry->LastIndSeqAtTimer+REORDERING_PACKET_TIMEOUT)) && */
+/*               (pBAEntry->list.qlen > ((pBAEntry->BAWinSize*7)/8))) //|| */
+/*              (RTMP_TIME_AFTER((unsigned long)Now32, (unsigned long)(pBAEntry->LastIndSeqAtTimer+(10*REORDERING_PACKET_TIMEOUT))) && */
+/*               (pBAEntry->list.qlen > (pBAEntry->BAWinSize/8))) */
        if (RTMP_TIME_AFTER
            ((unsigned long)Now32,
             (unsigned long)(pBAEntry->LastIndSeqAtTimer +
@@ -413,16 +413,16 @@ void ba_flush_reordering_timeout_mpdus(IN PRTMP_ADAPTER pAd,
                                 (REORDERING_PACKET_TIMEOUT)))
                && (pBAEntry->list.qlen > 0)
            ) {
-               //
-               // force LastIndSeq to shift to LastIndSeq+1
-               //
+               /* */
+               /* force LastIndSeq to shift to LastIndSeq+1 */
+               /* */
                Sequence = (pBAEntry->LastIndSeq + 1) & MAXSEQ;
                ba_indicate_reordering_mpdus_le_seq(pAd, pBAEntry, Sequence);
                pBAEntry->LastIndSeqAtTimer = Now32;
                pBAEntry->LastIndSeq = Sequence;
-               //
-               // indicate in-order mpdus
-               //
+               /* */
+               /* indicate in-order mpdus */
+               /* */
                Sequence =
                    ba_indicate_reordering_mpdus_in_order(pAd, pBAEntry,
                                                          Sequence);
@@ -446,7 +446,7 @@ VOID BAOriSessionSetUp(IN PRTMP_ADAPTER pAd,
                       IN USHORT TimeOut,
                       IN ULONG DelayTime, IN BOOLEAN isForced)
 {
-       //MLME_ADDBA_REQ_STRUCT AddbaReq;
+       /*MLME_ADDBA_REQ_STRUCT AddbaReq; */
        BA_ORI_ENTRY *pBAEntry = NULL;
        USHORT Idx;
        BOOLEAN Cancelled;
@@ -455,20 +455,20 @@ VOID BAOriSessionSetUp(IN PRTMP_ADAPTER pAd,
            && (isForced == FALSE))
                return;
 
-       // if this entry is limited to use legacy tx mode, it doesn't generate BA.
+       /* if this entry is limited to use legacy tx mode, it doesn't generate BA. */
        if (RTMPStaFixedTxMode(pAd, pEntry) != FIXED_TXMODE_HT)
                return;
 
        if ((pEntry->BADeclineBitmap & (1 << TID)) && (isForced == FALSE)) {
-               // try again after 3 secs
+               /* try again after 3 secs */
                DelayTime = 3000;
-//              DBGPRINT(RT_DEBUG_TRACE, ("DeCline BA from Peer\n"));
-//              return;
+/*              DBGPRINT(RT_DEBUG_TRACE, ("DeCline BA from Peer\n")); */
+/*              return; */
        }
 
        Idx = pEntry->BAOriWcidArray[TID];
        if (Idx == 0) {
-               // allocate a BA session
+               /* allocate a BA session */
                pBAEntry = BATableAllocOriEntry(pAd, &Idx);
                if (pBAEntry == NULL) {
                        DBGPRINT(RT_DEBUG_TRACE,
@@ -485,12 +485,12 @@ VOID BAOriSessionSetUp(IN PRTMP_ADAPTER pAd,
 
        pEntry->BAOriWcidArray[TID] = Idx;
 
-       // Initialize BA session
+       /* Initialize BA session */
        pBAEntry->ORI_BA_Status = Originator_WaitRes;
        pBAEntry->Wcid = pEntry->Aid;
        pBAEntry->BAWinSize = pAd->CommonCfg.BACapability.field.RxBAWinLimit;
        pBAEntry->Sequence = BA_ORI_INIT_SEQ;
-       pBAEntry->Token = 1;    // (2008-01-21) Jan Lee recommends it - this token can't be 0
+       pBAEntry->Token = 1;    /* (2008-01-21) Jan Lee recommends it - this token can't be 0 */
        pBAEntry->TID = TID;
        pBAEntry->TimeOutValue = TimeOut;
        pBAEntry->pAdapter = pAd;
@@ -502,7 +502,7 @@ VOID BAOriSessionSetUp(IN PRTMP_ADAPTER pAd,
        } else
                RTMPCancelTimer(&pBAEntry->ORIBATimer, &Cancelled);
 
-       // set timer to send ADDBA request
+       /* set timer to send ADDBA request */
        RTMPSetTimer(&pBAEntry->ORIBATimer, DelayTime);
 }
 
@@ -522,7 +522,7 @@ VOID BAOriSessionAdd(IN PRTMP_ADAPTER pAd,
        Idx = pEntry->BAOriWcidArray[TID];
        pBAEntry = &pAd->BATable.BAOriEntry[Idx];
 
-       // Start fill in parameters.
+       /* Start fill in parameters. */
        if ((Idx != 0) && (pBAEntry->TID == TID)
            && (pBAEntry->ORI_BA_Status == Originator_WaitRes)) {
                pBAEntry->BAWinSize =
@@ -533,21 +533,21 @@ VOID BAOriSessionAdd(IN PRTMP_ADAPTER pAd,
                pBAEntry->ORI_BA_Status = Originator_Done;
                pAd->BATable.numDoneOriginator++;
 
-               // reset sequence number
+               /* reset sequence number */
                pBAEntry->Sequence = BA_ORI_INIT_SEQ;
-               // Set Bitmap flag.
+               /* Set Bitmap flag. */
                pEntry->TXBAbitmap |= (1 << TID);
                RTMPCancelTimer(&pBAEntry->ORIBATimer, &Cancelled);
 
-               pBAEntry->ORIBATimer.TimerValue = 0;    //pFrame->TimeOutValue;
+               pBAEntry->ORIBATimer.TimerValue = 0;    /*pFrame->TimeOutValue; */
 
                DBGPRINT(RT_DEBUG_TRACE,
                         ("%s : TXBAbitmap = %x, BAWinSize = %d, TimeOut = %ld\n",
                          __func__, pEntry->TXBAbitmap, pBAEntry->BAWinSize,
                          pBAEntry->ORIBATimer.TimerValue));
 
-               // SEND BAR ;
-               NStatus = MlmeAllocateMemory(pAd, &pOutBuffer2);        //Get an unused nonpaged memory
+               /* SEND BAR ; */
+               NStatus = MlmeAllocateMemory(pAd, &pOutBuffer2);        /*Get an unused nonpaged memory */
                if (NStatus != NDIS_STATUS_SUCCESS) {
                        DBGPRINT(RT_DEBUG_TRACE,
                                 ("BA - BAOriSessionAdd() allocate memory failed \n"));
@@ -558,16 +558,16 @@ VOID BAOriSessionAdd(IN PRTMP_ADAPTER pAd,
                              pAd->MacTab.Content[pBAEntry->Wcid].Addr,
                              pAd->CurrentAddress);
 
-               FrameBar.StartingSeq.field.FragNum = 0; // make sure sequence not clear in DEL function.
-               FrameBar.StartingSeq.field.StartSeq = pBAEntry->Sequence;       // make sure sequence not clear in DEL funciton.
-               FrameBar.BarControl.TID = pBAEntry->TID;        // make sure sequence not clear in DEL funciton.
+               FrameBar.StartingSeq.field.FragNum = 0; /* make sure sequence not clear in DEL function. */
+               FrameBar.StartingSeq.field.StartSeq = pBAEntry->Sequence;       /* make sure sequence not clear in DEL funciton. */
+               FrameBar.BarControl.TID = pBAEntry->TID;        /* make sure sequence not clear in DEL funciton. */
                MakeOutgoingFrame(pOutBuffer2, &FrameLen,
                                  sizeof(FRAME_BAR), &FrameBar, END_OF_ARGS);
                MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer2, FrameLen);
                MlmeFreeMemory(pAd, pOutBuffer2);
 
                if (pBAEntry->ORIBATimer.TimerValue)
-                       RTMPSetTimer(&pBAEntry->ORIBATimer, pBAEntry->ORIBATimer.TimerValue);   // in mSec
+                       RTMPSetTimer(&pBAEntry->ORIBATimer, pBAEntry->ORIBATimer.TimerValue);   /* in mSec */
        }
 }
 
@@ -580,19 +580,19 @@ BOOLEAN BARecSessionAdd(IN PRTMP_ADAPTER pAd,
        USHORT Idx;
        UCHAR TID;
        UCHAR BAWinSize;
-       //UINT32                  Value;
-       //UINT                    offset;
+       /*UINT32                  Value; */
+       /*UINT                    offset; */
 
        ASSERT(pEntry);
 
-       // find TID
+       /* find TID */
        TID = pFrame->BaParm.TID;
 
        BAWinSize =
            min(((UCHAR) pFrame->BaParm.BufSize),
                (UCHAR) pAd->CommonCfg.BACapability.field.RxBAWinLimit);
 
-       // Intel patch
+       /* Intel patch */
        if (BAWinSize == 0) {
                BAWinSize = 64;
        }
@@ -603,7 +603,7 @@ BOOLEAN BARecSessionAdd(IN PRTMP_ADAPTER pAd,
                pBAEntry = BATableAllocRecEntry(pAd, &Idx);
        } else {
                pBAEntry = &pAd->BATable.BARecEntry[Idx];
-               // flush all pending reordering mpdus
+               /* flush all pending reordering mpdus */
                ba_refresh_reordering_mpdus(pAd, pBAEntry);
        }
 
@@ -612,7 +612,7 @@ BOOLEAN BARecSessionAdd(IN PRTMP_ADAPTER pAd,
                  pAd->BATable.numAsRecipient, Idx, pFrame->BaParm.BufSize,
                  BAWinSize));
 
-       // Start fill in parameters.
+       /* Start fill in parameters. */
        if (pBAEntry != NULL) {
                ASSERT(pBAEntry->list.qlen == 0);
 
@@ -622,8 +622,8 @@ BOOLEAN BARecSessionAdd(IN PRTMP_ADAPTER pAd,
                pBAEntry->TID = TID;
                pBAEntry->TimeOutValue = pFrame->TimeOutValue;
                pBAEntry->REC_BA_Status = Recipient_Accept;
-               // initial sequence number
-               pBAEntry->LastIndSeq = RESET_RCV_SEQ;   //pFrame->BaStartSeq.field.StartSeq;
+               /* initial sequence number */
+               pBAEntry->LastIndSeq = RESET_RCV_SEQ;   /*pFrame->BaStartSeq.field.StartSeq; */
 
                DBGPRINT(RT_DEBUG_OFF,
                         ("Start Seq = %08x\n",
@@ -638,13 +638,13 @@ BOOLEAN BARecSessionAdd(IN PRTMP_ADAPTER pAd,
                                      TRUE);
                }
 
-               // Set Bitmap flag.
+               /* Set Bitmap flag. */
                pEntry->RXBAbitmap |= (1 << TID);
                pEntry->BARecWcidArray[TID] = Idx;
 
                pEntry->BADeclineBitmap &= ~(1 << TID);
 
-               // Set BA session mask in WCID table.
+               /* Set BA session mask in WCID table. */
                RTMP_ADD_BA_SESSION_TO_ASIC(pAd, pEntry->Aid, TID);
 
                DBGPRINT(RT_DEBUG_TRACE,
@@ -673,11 +673,11 @@ BA_REC_ENTRY *BATableAllocRecEntry(IN PRTMP_ADAPTER pAd, OUT USHORT * Idx)
                                        MAX_BARECI_SESSION));
                goto done;
        }
-       // reserve idx 0 to identify BAWcidArray[TID] as empty
+       /* reserve idx 0 to identify BAWcidArray[TID] as empty */
        for (i = 1; i < MAX_LEN_OF_BA_REC_TABLE; i++) {
                pBAEntry = &pAd->BATable.BARecEntry[i];
                if ((pBAEntry->REC_BA_Status == Recipient_NONE)) {
-                       // get one
+                       /* get one */
                        pAd->BATable.numAsRecipient++;
                        pBAEntry->REC_BA_Status = Recipient_USED;
                        *Idx = i;
@@ -700,11 +700,11 @@ BA_ORI_ENTRY *BATableAllocOriEntry(IN PRTMP_ADAPTER pAd, OUT USHORT * Idx)
        if (pAd->BATable.numAsOriginator >= (MAX_LEN_OF_BA_ORI_TABLE)) {
                goto done;
        }
-       // reserve idx 0 to identify BAWcidArray[TID] as empty
+       /* reserve idx 0 to identify BAWcidArray[TID] as empty */
        for (i = 1; i < MAX_LEN_OF_BA_ORI_TABLE; i++) {
                pBAEntry = &pAd->BATable.BAOriEntry[i];
                if ((pBAEntry->ORI_BA_Status == Originator_NONE)) {
-                       // get one
+                       /* get one */
                        pAd->BATable.numAsOriginator++;
                        pBAEntry->ORI_BA_Status = Originator_USED;
                        pBAEntry->pAdapter = pAd;
@@ -739,7 +739,7 @@ VOID BATableFreeOriEntry(IN PRTMP_ADAPTER pAd, IN ULONG Idx)
                        DBGPRINT(RT_DEBUG_TRACE,
                                 ("BATableFreeOriEntry numAsOriginator= %ld\n",
                                  pAd->BATable.numAsRecipient));
-                       // Erase Bitmap flag.
+                       /* Erase Bitmap flag. */
                }
 
                ASSERT(pAd->BATable.numAsOriginator != 0);
@@ -789,13 +789,13 @@ VOID BAOriSessionTearDown(IN OUT PRTMP_ADAPTER pAd,
        if (Wcid >= MAX_LEN_OF_MAC_TABLE) {
                return;
        }
-       //
-       // Locate corresponding BA Originator Entry in BA Table with the (pAddr,TID).
-       //
+       /* */
+       /* Locate corresponding BA Originator Entry in BA Table with the (pAddr,TID). */
+       /* */
        Idx = pAd->MacTab.Content[Wcid].BAOriWcidArray[TID];
        if ((Idx == 0) || (Idx >= MAX_LEN_OF_BA_ORI_TABLE)) {
                if (bForceSend == TRUE) {
-                       // force send specified TID DelBA
+                       /* force send specified TID DelBA */
                        MLME_DELBA_REQ_STRUCT DelbaReq;
                        MLME_QUEUE_ELEM *Elem =
                            (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM),
@@ -831,9 +831,9 @@ VOID BAOriSessionTearDown(IN OUT PRTMP_ADAPTER pAd,
        DBGPRINT(RT_DEBUG_TRACE,
                 ("\t===>Idx = %ld, Wcid=%d.TID=%d, ORI_BA_Status = %d \n", Idx,
                  Wcid, TID, pBAEntry->ORI_BA_Status));
-       //
-       // Prepare DelBA action frame and send to the peer.
-       //
+       /* */
+       /* Prepare DelBA action frame and send to the peer. */
+       /* */
        if ((bPassive == FALSE) && (TID == pBAEntry->TID)
            && (pBAEntry->ORI_BA_Status == Originator_Done)) {
                MLME_DELBA_REQ_STRUCT DelbaReq;
@@ -863,7 +863,7 @@ VOID BAOriSessionTearDown(IN OUT PRTMP_ADAPTER pAd,
        BATableFreeOriEntry(pAd, Idx);
 
        if (bPassive) {
-               //BAOriSessionSetUp(pAd, &pAd->MacTab.Content[Wcid], TID, 0, 10000, TRUE);
+               /*BAOriSessionSetUp(pAd, &pAd->MacTab.Content[Wcid], TID, 0, 10000, TRUE); */
        }
 }
 
@@ -876,9 +876,9 @@ VOID BARecSessionTearDown(IN OUT PRTMP_ADAPTER pAd,
        if (Wcid >= MAX_LEN_OF_MAC_TABLE) {
                return;
        }
-       //
-       //  Locate corresponding BA Originator Entry in BA Table with the (pAddr,TID).
-       //
+       /* */
+       /*  Locate corresponding BA Originator Entry in BA Table with the (pAddr,TID). */
+       /* */
        Idx = pAd->MacTab.Content[Wcid].BARecWcidArray[TID];
        if (Idx == 0)
                return;
@@ -890,21 +890,21 @@ VOID BARecSessionTearDown(IN OUT PRTMP_ADAPTER pAd,
        DBGPRINT(RT_DEBUG_TRACE,
                 ("\t===>Idx = %ld, Wcid=%d.TID=%d, REC_BA_Status = %d \n", Idx,
                  Wcid, TID, pBAEntry->REC_BA_Status));
-       //
-       // Prepare DelBA action frame and send to the peer.
-       //
+       /* */
+       /* Prepare DelBA action frame and send to the peer. */
+       /* */
        if ((TID == pBAEntry->TID)
            && (pBAEntry->REC_BA_Status == Recipient_Accept)) {
                MLME_DELBA_REQ_STRUCT DelbaReq;
                BOOLEAN Cancelled;
-               //ULONG   offset;
-               //UINT32  VALUE;
+               /*ULONG   offset; */
+               /*UINT32  VALUE; */
 
                RTMPCancelTimer(&pBAEntry->RECBATimer, &Cancelled);
 
-               //
-               // 1. Send DELBA Action Frame
-               //
+               /* */
+               /* 1. Send DELBA Action Frame */
+               /* */
                if (bPassive == FALSE) {
                        MLME_QUEUE_ELEM *Elem =
                            (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM),
@@ -931,18 +931,18 @@ VOID BARecSessionTearDown(IN OUT PRTMP_ADAPTER pAd,
                        }
                }
 
-               //
-               // 2. Free resource of BA session
-               //
-               // flush all pending reordering mpdus
+               /* */
+               /* 2. Free resource of BA session */
+               /* */
+               /* flush all pending reordering mpdus */
                ba_refresh_reordering_mpdus(pAd, pBAEntry);
 
                NdisAcquireSpinLock(&pAd->BATabLock);
 
-               // Erase Bitmap flag.
+               /* Erase Bitmap flag. */
                pBAEntry->LastIndSeq = RESET_RCV_SEQ;
                pBAEntry->BAWinSize = 0;
-               // Erase Bitmap flag at software mactable
+               /* Erase Bitmap flag at software mactable */
                pAd->MacTab.Content[Wcid].RXBAbitmap &=
                    (~(1 << (pBAEntry->TID)));
                pAd->MacTab.Content[Wcid].BARecWcidArray[TID] = 0;
@@ -995,7 +995,7 @@ VOID BAOriSessionSetupTimeout(IN PVOID SystemSpecific1,
        pAd = pBAEntry->pAdapter;
 
        {
-               // Do nothing if monitor mode is on
+               /* Do nothing if monitor mode is on */
                if (MONITOR_ON(pAd))
                        return;
        }
@@ -1062,7 +1062,7 @@ VOID BARecSessionIdleTimeout(IN PVOID SystemSpecific1,
                     (unsigned long)(pBAEntry->LastIndSeqAtTimer +
                                     REC_BA_SESSION_IDLE_TIMEOUT))) {
                        pAd = pBAEntry->pAdapter;
-                       // flush all pending reordering mpdus
+                       /* flush all pending reordering mpdus */
                        ba_refresh_reordering_mpdus(pAd, pBAEntry);
                        DBGPRINT(RT_DEBUG_OFF,
                                 ("%ld: REC BA session Timeout\n", Now32));
@@ -1072,15 +1072,15 @@ VOID BARecSessionIdleTimeout(IN PVOID SystemSpecific1,
 
 VOID PeerAddBAReqAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 {
-       //      7.4.4.1
-       //ULONG Idx;
+       /*      7.4.4.1 */
+       /*ULONG Idx; */
        UCHAR Status = 1;
        UCHAR pAddr[6];
        FRAME_ADDBA_RSP ADDframe;
        PUCHAR pOutBuffer = NULL;
        NDIS_STATUS NStatus;
        PFRAME_ADDBA_REQ pAddreqFrame = NULL;
-       //UCHAR         BufSize;
+       /*UCHAR         BufSize; */
        ULONG FrameLen;
        PULONG ptemp;
        PMAC_TABLE_ENTRY pMacEntry;
@@ -1088,16 +1088,16 @@ VOID PeerAddBAReqAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
        DBGPRINT(RT_DEBUG_TRACE,
                 ("%s ==> (Wcid = %d)\n", __func__, Elem->Wcid));
 
-       //hex_dump("AddBAReq", Elem->Msg, Elem->MsgLen);
+       /*hex_dump("AddBAReq", Elem->Msg, Elem->MsgLen); */
 
-       //ADDBA Request from unknown peer, ignore this.
+       /*ADDBA Request from unknown peer, ignore this. */
        if (Elem->Wcid >= MAX_LEN_OF_MAC_TABLE)
                return;
 
        pMacEntry = &pAd->MacTab.Content[Elem->Wcid];
        DBGPRINT(RT_DEBUG_TRACE, ("BA - PeerAddBAReqAction----> \n"));
        ptemp = (PULONG) Elem->Msg;
-       //DBGPRINT_RAW(RT_DEBUG_EMU, ("%08x:: %08x:: %08x:: %08x:: %08x:: %08x:: %08x:: %08x:: %08x\n", *(ptemp), *(ptemp+1), *(ptemp+2), *(ptemp+3), *(ptemp+4), *(ptemp+5), *(ptemp+6), *(ptemp+7), *(ptemp+8)));
+       /*DBGPRINT_RAW(RT_DEBUG_EMU, ("%08x:: %08x:: %08x:: %08x:: %08x:: %08x:: %08x:: %08x:: %08x\n", *(ptemp), *(ptemp+1), *(ptemp+2), *(ptemp+3), *(ptemp+4), *(ptemp+5), *(ptemp+6), *(ptemp+7), *(ptemp+8))); */
 
        if (PeerAddBAReqActionSanity(pAd, Elem->Msg, Elem->MsgLen, pAddr)) {
 
@@ -1111,9 +1111,9 @@ VOID PeerAddBAReqAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
                             pAddreqFrame))
                                Status = 0;
                        else
-                               Status = 38;    // more parameters have invalid values
+                               Status = 38;    /* more parameters have invalid values */
                } else {
-                       Status = 37;    // the request has been declined.
+                       Status = 37;    /* the request has been declined. */
                }
        }
 
@@ -1121,8 +1121,8 @@ VOID PeerAddBAReqAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
                ASSERT(pAd->MacTab.Content[Elem->Wcid].Sst == SST_ASSOC);
 
        pAddreqFrame = (PFRAME_ADDBA_REQ) (&Elem->Msg[0]);
-       // 2. Always send back ADDBA Response
-       NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); //Get an unused nonpaged memory
+       /* 2. Always send back ADDBA Response */
+       NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); /*Get an unused nonpaged memory */
        if (NStatus != NDIS_STATUS_SUCCESS) {
                DBGPRINT(RT_DEBUG_TRACE,
                         ("ACTION - PeerBAAction() allocate memory failed \n"));
@@ -1131,7 +1131,7 @@ VOID PeerAddBAReqAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 
        NdisZeroMemory(&ADDframe, sizeof(FRAME_ADDBA_RSP));
 
-       // 2-1. Prepare ADDBA Response frame.
+       /* 2-1. Prepare ADDBA Response frame. */
        {
                if (ADHOC_ON(pAd))
                        ActHeaderInit(pAd, &ADDframe.Hdr, pAddr,
@@ -1145,7 +1145,7 @@ VOID PeerAddBAReqAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
        ADDframe.Category = CATEGORY_BA;
        ADDframe.Action = ADDBA_RESP;
        ADDframe.Token = pAddreqFrame->Token;
-       // What is the Status code??  need to check.
+       /* What is the Status code??  need to check. */
        ADDframe.StatusCode = Status;
        ADDframe.BaParm.BAPolicy = IMMED_BA;
        ADDframe.BaParm.AMSDUSupported = 0;
@@ -1156,7 +1156,7 @@ VOID PeerAddBAReqAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
        if (ADDframe.BaParm.BufSize == 0) {
                ADDframe.BaParm.BufSize = 64;
        }
-       ADDframe.TimeOutValue = 0;      //pAddreqFrame->TimeOutValue;
+       ADDframe.TimeOutValue = 0;      /*pAddreqFrame->TimeOutValue; */
 
        *(USHORT *) (&ADDframe.BaParm) =
            cpu2le16(*(USHORT *) (&ADDframe.BaParm));
@@ -1175,18 +1175,18 @@ VOID PeerAddBAReqAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 
 VOID PeerAddBARspAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 {
-       //UCHAR         Idx, i;
-       //PUCHAR                   pOutBuffer = NULL;
+       /*UCHAR         Idx, i; */
+       /*PUCHAR                   pOutBuffer = NULL; */
        PFRAME_ADDBA_RSP pFrame = NULL;
-       //PBA_ORI_ENTRY         pBAEntry;
+       /*PBA_ORI_ENTRY         pBAEntry; */
 
-       //ADDBA Response from unknown peer, ignore this.
+       /*ADDBA Response from unknown peer, ignore this. */
        if (Elem->Wcid >= MAX_LEN_OF_MAC_TABLE)
                return;
 
        DBGPRINT(RT_DEBUG_TRACE, ("%s ==> Wcid(%d)\n", __func__, Elem->Wcid));
 
-       //hex_dump("PeerAddBARspAction()", Elem->Msg, Elem->MsgLen);
+       /*hex_dump("PeerAddBARspAction()", Elem->Msg, Elem->MsgLen); */
 
        if (PeerAddBARspActionSanity(pAd, Elem->Msg, Elem->MsgLen)) {
                pFrame = (PFRAME_ADDBA_RSP) (&Elem->Msg[0]);
@@ -1195,17 +1195,17 @@ VOID PeerAddBARspAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
                         ("\t\t StatusCode = %d\n", pFrame->StatusCode));
                switch (pFrame->StatusCode) {
                case 0:
-                       // I want a BAsession with this peer as an originator.
+                       /* I want a BAsession with this peer as an originator. */
                        BAOriSessionAdd(pAd, &pAd->MacTab.Content[Elem->Wcid],
                                        pFrame);
                        break;
                default:
-                       // check status == USED ???
+                       /* check status == USED ??? */
                        BAOriSessionTearDown(pAd, Elem->Wcid,
                                             pFrame->BaParm.TID, TRUE, FALSE);
                        break;
                }
-               // Rcv Decline StatusCode
+               /* Rcv Decline StatusCode */
                if ((pFrame->StatusCode == 37)
                    || ((pAd->OpMode == OPMODE_STA) && STA_TGN_WIFI_ON(pAd)
                        && (pFrame->StatusCode != 0))
@@ -1218,12 +1218,12 @@ VOID PeerAddBARspAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 
 VOID PeerDelBAAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 {
-       //UCHAR                         Idx;
-       //PUCHAR                                pOutBuffer = NULL;
+       /*UCHAR                         Idx; */
+       /*PUCHAR                                pOutBuffer = NULL; */
        PFRAME_DELBA_REQ pDelFrame = NULL;
 
        DBGPRINT(RT_DEBUG_TRACE, ("%s ==>\n", __func__));
-       //DELBA Request from unknown peer, ignore this.
+       /*DELBA Request from unknown peer, ignore this. */
        if (PeerDelBAActionSanity(pAd, Elem->Wcid, Elem->Msg, Elem->MsgLen)) {
                pDelFrame = (PFRAME_DELBA_REQ) (&Elem->Msg[0]);
                if (pDelFrame->DelbaParm.Initiator == ORIGINATOR) {
@@ -1235,7 +1235,7 @@ VOID PeerDelBAAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
                        DBGPRINT(RT_DEBUG_TRACE,
                                 ("BA - PeerDelBAAction----> RECIPIENT, Reason = %d\n",
                                  pDelFrame->ReasonCode));
-                       //hex_dump("DelBA Frame", pDelFrame, Elem->MsgLen);
+                       /*hex_dump("DelBA Frame", pDelFrame, Elem->MsgLen); */
                        BAOriSessionTearDown(pAd, Elem->Wcid,
                                             pDelFrame->DelbaParm.TID, TRUE,
                                             FALSE);
@@ -1248,26 +1248,26 @@ BOOLEAN CntlEnqueueForRecv(IN PRTMP_ADAPTER pAd,
                           IN ULONG MsgLen, IN PFRAME_BA_REQ pMsg)
 {
        PFRAME_BA_REQ pFrame = pMsg;
-       //PRTMP_REORDERBUF      pBuffer;
-       //PRTMP_REORDERBUF      pDmaBuf;
+       /*PRTMP_REORDERBUF      pBuffer; */
+       /*PRTMP_REORDERBUF      pDmaBuf; */
        PBA_REC_ENTRY pBAEntry;
-       //BOOLEAN       Result;
+       /*BOOLEAN       Result; */
        ULONG Idx;
-       //UCHAR NumRxPkt;
-       UCHAR TID;              //, i;
+       /*UCHAR NumRxPkt; */
+       UCHAR TID;              /*, i; */
 
        TID = (UCHAR) pFrame->BARControl.TID;
 
        DBGPRINT(RT_DEBUG_TRACE,
                 ("%s(): BAR-Wcid(%ld), Tid (%d)\n", __func__, Wcid, TID));
-       //hex_dump("BAR", (PCHAR) pFrame, MsgLen);
-       // Do nothing if the driver is starting halt state.
-       // This might happen when timer already been fired before cancel timer with mlmehalt
+       /*hex_dump("BAR", (PCHAR) pFrame, MsgLen); */
+       /* Do nothing if the driver is starting halt state. */
+       /* This might happen when timer already been fired before cancel timer with mlmehalt */
        if (RTMP_TEST_FLAG
            (pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
                return FALSE;
 
-       // First check the size, it MUST not exceed the mlme queue size
+       /* First check the size, it MUST not exceed the mlme queue size */
        if (MsgLen > MGMT_DMA_BUFFER_SIZE) {
                DBGPRINT_ERR(("CntlEnqueueForRecv: frame too large, size = %ld \n", MsgLen));
                return FALSE;
@@ -1280,7 +1280,7 @@ BOOLEAN CntlEnqueueForRecv(IN PRTMP_ADAPTER pAd,
        }
 
        if ((Wcid < MAX_LEN_OF_MAC_TABLE) && (TID < 8)) {
-               // if this receiving packet is from SA that is in our OriEntry. Since WCID <9 has direct mapping. no need search.
+               /* if this receiving packet is from SA that is in our OriEntry. Since WCID <9 has direct mapping. no need search. */
                Idx = pAd->MacTab.Content[Wcid].BARecWcidArray[TID];
                pBAEntry = &pAd->BATable.BARecEntry[Idx];
        } else {
@@ -1294,7 +1294,7 @@ BOOLEAN CntlEnqueueForRecv(IN PRTMP_ADAPTER pAd,
        if (SEQ_SMALLER
            (pBAEntry->LastIndSeq, pFrame->BAStartingSeq.field.StartSeq,
             MAXSEQ)) {
-               //DBGPRINT(RT_DEBUG_TRACE, ("BAR Seq = %x, LastIndSeq = %x\n", pFrame->BAStartingSeq.field.StartSeq, pBAEntry->LastIndSeq));
+               /*DBGPRINT(RT_DEBUG_TRACE, ("BAR Seq = %x, LastIndSeq = %x\n", pFrame->BAStartingSeq.field.StartSeq, pBAEntry->LastIndSeq)); */
                ba_indicate_reordering_mpdus_le_seq(pAd, pBAEntry,
                                                    pFrame->BAStartingSeq.field.
                                                    StartSeq);
@@ -1302,7 +1302,7 @@ BOOLEAN CntlEnqueueForRecv(IN PRTMP_ADAPTER pAd,
                    (pFrame->BAStartingSeq.field.StartSeq ==
                     0) ? MAXSEQ : (pFrame->BAStartingSeq.field.StartSeq - 1);
        }
-       //ba_refresh_reordering_mpdus(pAd, pBAEntry);
+       /*ba_refresh_reordering_mpdus(pAd, pBAEntry); */
        return TRUE;
 }
 
@@ -1313,11 +1313,11 @@ VOID SendPSMPAction(IN PRTMP_ADAPTER pAd, IN UCHAR Wcid, IN UCHAR Psmp)
 {
        PUCHAR pOutBuffer = NULL;
        NDIS_STATUS NStatus;
-       //ULONG           Idx;
+       /*ULONG           Idx; */
        FRAME_PSMP_ACTION Frame;
        ULONG FrameLen;
 
-       NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); //Get an unused nonpaged memory
+       NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); /*Get an unused nonpaged memory */
        if (NStatus != NDIS_STATUS_SUCCESS) {
                DBGPRINT(RT_DEBUG_ERROR,
                         ("BA - MlmeADDBAAction() allocate memory failed \n"));
@@ -1337,7 +1337,7 @@ VOID SendPSMPAction(IN PRTMP_ADAPTER pAd, IN UCHAR Wcid, IN UCHAR Psmp)
                        || pAd->Antenna.field.TxPath > 1)) {
                        RTMP_ASIC_MMPS_DISABLE(pAd);
                }
-#endif // RT30xx //
+#endif /* RT30xx // */
                Frame.Psmp = 0;
                break;
        case MMPS_DYNAMIC:
@@ -1350,7 +1350,7 @@ VOID SendPSMPAction(IN PRTMP_ADAPTER pAd, IN UCHAR Wcid, IN UCHAR Psmp)
                        || pAd->Antenna.field.TxPath > 1)) {
                        RTMP_ASIC_MMPS_ENABLE(pAd);
                }
-#endif // RT30xx //
+#endif /* RT30xx // */
                Frame.Psmp = 1;
                break;
        }
@@ -1372,7 +1372,7 @@ typedef struct PACKED {
        UCHAR BSSID[MAC_ADDR_LEN];
        UCHAR ReportingCondition;
        UCHAR Threshold;
-       UCHAR SSIDIE[2];        // 2 byte
+       UCHAR SSIDIE[2];        /* 2 byte */
 } BEACON_REQUEST;
 
 typedef struct PACKED {
@@ -1391,10 +1391,10 @@ void convert_reordering_packet_to_preAMSDU_or_802_3_packet(IN PRTMP_ADAPTER pAd,
        PNDIS_PACKET pRxPkt;
        UCHAR Header802_3[LENGTH_802_3];
 
-       // 1. get 802.3 Header
-       // 2. remove LLC
-       //              a. pointer pRxBlk->pData to payload
-       //      b. modify pRxBlk->DataSize
+       /* 1. get 802.3 Header */
+       /* 2. remove LLC */
+       /*              a. pointer pRxBlk->pData to payload */
+       /*      b. modify pRxBlk->DataSize */
 
        RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
 
@@ -1406,9 +1406,9 @@ void convert_reordering_packet_to_preAMSDU_or_802_3_packet(IN PRTMP_ADAPTER pAd,
        SET_OS_PKT_LEN(pRxPkt, pRxBlk->DataSize);
        SET_OS_PKT_DATATAIL(pRxPkt, pRxBlk->pData, pRxBlk->DataSize);
 
-       //
-       // copy 802.3 header, if necessary
-       //
+       /* */
+       /* copy 802.3 header, if necessary */
+       /* */
        if (!RX_BLK_TEST_FLAG(pRxBlk, fRX_AMSDU)) {
                {
 #ifdef LINUX
@@ -1446,7 +1446,7 @@ static VOID ba_enqueue_reordering_packet(IN PRTMP_ADAPTER pAd,
 
        mpdu_blk = ba_mpdu_blk_alloc(pAd);
        if ((mpdu_blk != NULL) && (!RX_BLK_TEST_FLAG(pRxBlk, fRX_EAP))) {
-               // Write RxD buffer address & allocated buffer length
+               /* Write RxD buffer address & allocated buffer length */
                NdisAcquireSpinLock(&pBAEntry->RxReRingLock);
 
                mpdu_blk->Sequence = Sequence;
@@ -1459,18 +1459,18 @@ static VOID ba_enqueue_reordering_packet(IN PRTMP_ADAPTER pAd,
 
                STATS_INC_RX_PACKETS(pAd, FromWhichBSSID);
 
-               //
-               // it is necessary for reordering packet to record
-               // which BSS it come from
-               //
+               /* */
+               /* it is necessary for reordering packet to record */
+               /* which BSS it come from */
+               /* */
                RTMP_SET_PACKET_IF(pRxBlk->pRxPacket, FromWhichBSSID);
 
                mpdu_blk->pPacket = pRxBlk->pRxPacket;
 
                if (ba_reordering_mpdu_insertsorted(&pBAEntry->list, mpdu_blk)
                    == FALSE) {
-                       // had been already within reordering list
-                       // don't indicate
+                       /* had been already within reordering list */
+                       /* don't indicate */
                        RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket,
                                            NDIS_STATUS_SUCCESS);
                        ba_mpdu_blk_free(pAd, mpdu_blk);
@@ -1489,7 +1489,7 @@ static VOID ba_enqueue_reordering_packet(IN PRTMP_ADAPTER pAd,
                 * and receving mpdu to upper layer
                 * make tcp/ip to take care reordering mechanism
                 */
-               //ba_refresh_reordering_mpdus(pAd, pBAEntry);
+               /*ba_refresh_reordering_mpdus(pAd, pBAEntry); */
                ba_indicate_reordering_mpdus_le_seq(pAd, pBAEntry, Sequence);
 
                pBAEntry->LastIndSeq = Sequence;
@@ -1527,7 +1527,7 @@ VOID Indicate_AMPDU_Packet(IN PRTMP_ADAPTER pAd,
 
        if (!RX_BLK_TEST_FLAG(pRxBlk, fRX_AMSDU)
            && (pRxBlk->DataSize > MAX_RX_PKT_LEN)) {
-               // release packet
+               /* release packet */
                RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket,
                                    NDIS_STATUS_FAILURE);
                return;
@@ -1542,9 +1542,9 @@ VOID Indicate_AMPDU_Packet(IN PRTMP_ADAPTER pAd,
                }
                pBAEntry = &pAd->BATable.BARecEntry[Idx];
        } else {
-               // impossible !!!
+               /* impossible !!! */
                ASSERT(0);
-               // release packet
+               /* release packet */
                RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket,
                                    NDIS_STATUS_FAILURE);
                return;
@@ -1552,7 +1552,7 @@ VOID Indicate_AMPDU_Packet(IN PRTMP_ADAPTER pAd,
 
        ASSERT(pBAEntry);
 
-       // update last rx time
+       /* update last rx time */
        NdisGetSystemUpTime(&Now32);
 
        pBAEntry->rcvSeq = Sequence;
@@ -1560,23 +1560,23 @@ VOID Indicate_AMPDU_Packet(IN PRTMP_ADAPTER pAd,
        ba_flush_reordering_timeout_mpdus(pAd, pBAEntry, Now32);
        pBAEntry->LastIndSeqAtTimer = Now32;
 
-       //
-       // Reset Last Indicate Sequence
-       //
+       /* */
+       /* Reset Last Indicate Sequence */
+       /* */
        if (pBAEntry->LastIndSeq == RESET_RCV_SEQ) {
                ASSERT((pBAEntry->list.qlen == 0)
                       && (pBAEntry->list.next == NULL));
 
-               // reset rcv sequence of BA session
+               /* reset rcv sequence of BA session */
                pBAEntry->LastIndSeq = Sequence;
                pBAEntry->LastIndSeqAtTimer = Now32;
                INDICATE_LEGACY_OR_AMSDU(pAd, pRxBlk, FromWhichBSSID);
                return;
        }
 
-       //
-       // I. Check if in order.
-       //
+       /* */
+       /* I. Check if in order. */
+       /* */
        if (SEQ_STEPONE(Sequence, pBAEntry->LastIndSeq, MAXSEQ)) {
                USHORT LastIndSeq;
 
@@ -1590,29 +1590,29 @@ VOID Indicate_AMPDU_Packet(IN PRTMP_ADAPTER pAd,
                }
                pBAEntry->LastIndSeqAtTimer = Now32;
        }
-       //
-       // II. Drop Duplicated Packet
-       //
+       /* */
+       /* II. Drop Duplicated Packet */
+       /* */
        else if (Sequence == pBAEntry->LastIndSeq) {
 
-               // drop and release packet
+               /* drop and release packet */
                pBAEntry->nDropPacket++;
                RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket,
                                    NDIS_STATUS_FAILURE);
        }
-       //
-       // III. Drop Old Received Packet
-       //
+       /* */
+       /* III. Drop Old Received Packet */
+       /* */
        else if (SEQ_SMALLER(Sequence, pBAEntry->LastIndSeq, MAXSEQ)) {
 
-               // drop and release packet
+               /* drop and release packet */
                pBAEntry->nDropPacket++;
                RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket,
                                    NDIS_STATUS_FAILURE);
        }
-       //
-       // IV. Receive Sequence within Window Size
-       //
+       /* */
+       /* IV. Receive Sequence within Window Size */
+       /* */
        else if (SEQ_SMALLER
                 (Sequence,
                  (((pBAEntry->LastIndSeq + pBAEntry->BAWinSize + 1)) & MAXSEQ),
@@ -1620,9 +1620,9 @@ VOID Indicate_AMPDU_Packet(IN PRTMP_ADAPTER pAd,
                ba_enqueue_reordering_packet(pAd, pBAEntry, pRxBlk,
                                             FromWhichBSSID);
        }
-       //
-       // V. Receive seq surpasses Win(lastseq + nMSDU). So refresh all reorder buffer
-       //
+       /* */
+       /* V. Receive seq surpasses Win(lastseq + nMSDU). So refresh all reorder buffer */
+       /* */
        else {
                LONG WinStartSeq, TmpSeq;
 
@@ -1632,7 +1632,7 @@ VOID Indicate_AMPDU_Packet(IN PRTMP_ADAPTER pAd,
                }
                WinStartSeq = (TmpSeq + 1) & MAXSEQ;
                ba_indicate_reordering_mpdus_le_seq(pAd, pBAEntry, WinStartSeq);
-               pBAEntry->LastIndSeq = WinStartSeq;     //TmpSeq;
+               pBAEntry->LastIndSeq = WinStartSeq;     /*TmpSeq; */
 
                pBAEntry->LastIndSeqAtTimer = Now32;
 
index a3758b0..030678c 100644 (file)
@@ -277,7 +277,7 @@ void construct_mic_header2(unsigned char *mic_header2,
        mic_header2[4] = mpdu[20];
        mic_header2[5] = mpdu[21];
 
-       // In Sequence Control field, mute sequence numer bits (12-bit)
+       /* In Sequence Control field, mute sequence numer bits (12-bit) */
        mic_header2[6] = mpdu[22] & 0x0f;       /* SC */
        mic_header2[7] = 0x00;  /* mpdu[23]; */
 
@@ -403,7 +403,7 @@ void construct_ctr_preload(unsigned char *ctr_preload,
        for (i = 8; i < 14; i++)
                ctr_preload[i] = pn_vector[13 - i];     /* ctr_preload[8:13] = PN[5:0] */
 #endif
-       ctr_preload[14] = (unsigned char)(c / 256);     // Ctr
+       ctr_preload[14] = (unsigned char)(c / 256);     /* Ctr */
        ctr_preload[15] = (unsigned char)(c % 256);
 
 }
@@ -477,12 +477,12 @@ BOOLEAN RTMPSoftDecryptAES(IN PRTMP_ADAPTER pAd,
        PN[4] = *(pData + HeaderLen + 6);
        PN[5] = *(pData + HeaderLen + 7);
 
-       payload_len = DataByteCnt - HeaderLen - 8 - 8;  // 8 bytes for CCMP header , 8 bytes for MIC
+       payload_len = DataByteCnt - HeaderLen - 8 - 8;  /* 8 bytes for CCMP header , 8 bytes for MIC */
        payload_remainder = (payload_len) % 16;
        num_blocks = (payload_len) / 16;
 
-       // Find start of payload
-       payload_index = HeaderLen + 8;  //IV+EIV
+       /* Find start of payload */
+       payload_index = HeaderLen + 8;  /*IV+EIV */
 
        for (i = 0; i < num_blocks; i++) {
                construct_ctr_preload(ctr_preload,
@@ -495,10 +495,10 @@ BOOLEAN RTMPSoftDecryptAES(IN PRTMP_ADAPTER pAd,
                payload_index += 16;
        }
 
-       //
-       // If there is a short final block, then pad it
-       // encrypt it and copy the unpadded part back
-       //
+       /* */
+       /* If there is a short final block, then pad it */
+       /* encrypt it and copy the unpadded part back */
+       /* */
        if (payload_remainder > 0) {
                construct_ctr_preload(ctr_preload,
                                      a4_exists,
@@ -515,9 +515,9 @@ BOOLEAN RTMPSoftDecryptAES(IN PRTMP_ADAPTER pAd,
                               payload_remainder);
                payload_index += payload_remainder;
        }
-       //
-       // Descrypt the MIC
-       //
+       /* */
+       /* Descrypt the MIC */
+       /* */
        construct_ctr_preload(ctr_preload, a4_exists, qc_exists, pData, PN, 0);
        NdisZeroMemory(padded_buffer, 16);
        NdisMoveMemory(padded_buffer, pData + payload_index, 8);
@@ -528,15 +528,15 @@ BOOLEAN RTMPSoftDecryptAES(IN PRTMP_ADAPTER pAd,
 
        NdisMoveMemory(TrailMIC, chain_buffer, 8);
 
-       //
-       // Calculate MIC
-       //
+       /* */
+       /* Calculate MIC */
+       /* */
 
-       //Force the protected frame bit on
+       /*Force the protected frame bit on */
        *(pData + 1) = *(pData + 1) | 0x40;
 
-       // Find start of payload
-       // Because the CCMP header has been removed
+       /* Find start of payload */
+       /* Because the CCMP header has been removed */
        payload_index = HeaderLen;
 
        construct_mic_iv(mic_iv, qc_exists, a4_exists, pData, payload_len, PN);
@@ -551,14 +551,14 @@ BOOLEAN RTMPSoftDecryptAES(IN PRTMP_ADAPTER pAd,
        bitwise_xor(aes_out, mic_header2, chain_buffer);
        aes128k128d(pWpaKey[KeyID].Key, chain_buffer, aes_out);
 
-       // iterate through each 16 byte payload block
+       /* iterate through each 16 byte payload block */
        for (i = 0; i < num_blocks; i++) {
                bitwise_xor(aes_out, pData + payload_index, chain_buffer);
                payload_index += 16;
                aes128k128d(pWpaKey[KeyID].Key, chain_buffer, aes_out);
        }
 
-       // Add on the final payload block if it needs padding
+       /* Add on the final payload block if it needs padding */
        if (payload_remainder > 0) {
                NdisZeroMemory(padded_buffer, 16);
                NdisMoveMemory(padded_buffer, pData + payload_index,
@@ -567,13 +567,13 @@ BOOLEAN RTMPSoftDecryptAES(IN PRTMP_ADAPTER pAd,
                bitwise_xor(aes_out, padded_buffer, chain_buffer);
                aes128k128d(pWpaKey[KeyID].Key, chain_buffer, aes_out);
        }
-       // aes_out contains padded mic, discard most significant
-       // 8 bytes to generate 64 bit MIC
+       /* aes_out contains padded mic, discard most significant */
+       /* 8 bytes to generate 64 bit MIC */
        for (i = 0; i < 8; i++)
                MIC[i] = aes_out[i];
 
        if (!NdisEqualMemory(MIC, TrailMIC, 8)) {
-               DBGPRINT(RT_DEBUG_ERROR, ("RTMPSoftDecryptAES, MIC Error !\n"));        //MIC error.
+               DBGPRINT(RT_DEBUG_ERROR, ("RTMPSoftDecryptAES, MIC Error !\n"));        /*MIC error. */
                return FALSE;
        }
 
@@ -1208,27 +1208,27 @@ VOID AES_GTK_KEY_WRAP(IN UCHAR * key,
 {
        UCHAR A[8], BIN[16], BOUT[16];
        UCHAR R[512];
-       INT num_blocks = p_len / 8;     // unit:64bits
+       INT num_blocks = p_len / 8;     /* unit:64bits */
        INT i, j;
        aes_context aesctx;
        UCHAR xor;
 
        rt_aes_set_key(&aesctx, key, 128);
 
-       // Init IA
+       /* Init IA */
        for (i = 0; i < 8; i++)
                A[i] = 0xa6;
 
-       //Input plaintext
+       /*Input plaintext */
        for (i = 0; i < num_blocks; i++) {
                for (j = 0; j < 8; j++)
                        R[8 * (i + 1) + j] = plaintext[8 * i + j];
        }
 
-       // Key Mix
+       /* Key Mix */
        for (j = 0; j < 6; j++) {
                for (i = 1; i <= num_blocks; i++) {
-                       //phase 1
+                       /*phase 1 */
                        NdisMoveMemory(BIN, A, 8);
                        NdisMoveMemory(&BIN[8], &R[8 * i], 8);
                        rt_aes_encrypt(&aesctx, BIN, BOUT);
@@ -1240,7 +1240,7 @@ VOID AES_GTK_KEY_WRAP(IN UCHAR * key,
                }
        }
 
-       // Output ciphertext
+       /* Output ciphertext */
        NdisMoveMemory(ciphertext, A, 8);
 
        for (i = 1; i <= num_blocks; i++) {
@@ -1273,7 +1273,7 @@ VOID AES_GTK_KEY_UNWRAP(IN UCHAR * key,
        INT i, j;
        aes_context aesctx;
        UCHAR *R;
-       INT num_blocks = c_len / 8;     // unit:64bits
+       INT num_blocks = c_len / 8;     /* unit:64bits */
 
        os_alloc_mem(NULL, (PUCHAR *) & R, 512);
 
@@ -1283,9 +1283,9 @@ VOID AES_GTK_KEY_UNWRAP(IN UCHAR * key,
                return;
        }
        /* End of if */
-       // Initialize
+       /* Initialize */
        NdisMoveMemory(A, ciphertext, 8);
-       //Input plaintext
+       /*Input plaintext */
        for (i = 0; i < (c_len - 8); i++) {
                R[i] = ciphertext[i + 8];
        }
@@ -1304,7 +1304,7 @@ VOID AES_GTK_KEY_UNWRAP(IN UCHAR * key,
                }
        }
 
-       // OUTPUT
+       /* OUTPUT */
        for (i = 0; i < c_len; i++) {
                plaintext[i] = R[i];
        }
index 7205b36..468aba5 100644 (file)
@@ -37,9 +37,9 @@
 
 #include "../rt_config.h"
 
-// Reset the RFIC setting to new series
+/* Reset the RFIC setting to new series */
 RTMP_RF_REGS RF2850RegTable[] = {
-//              ch       R1              R2              R3(TX0~4=0) R4
+/*              ch       R1              R2              R3(TX0~4=0) R4 */
        {1, 0x98402ecc, 0x984c0786, 0x9816b455, 0x9800510b}
        ,
        {2, 0x98402ecc, 0x984c0786, 0x98168a55, 0x9800519f}
@@ -69,7 +69,7 @@ RTMP_RF_REGS RF2850RegTable[] = {
        {14, 0x98402ecc, 0x984c07a2, 0x98168a55, 0x98005193}
        ,
 
-       // 802.11 UNI / HyperLan 2
+       /* 802.11 UNI / HyperLan 2 */
        {36, 0x98402ecc, 0x984c099a, 0x98158a55, 0x980ed1a3}
        ,
        {38, 0x98402ecc, 0x984c099e, 0x98158a55, 0x980ed193}
@@ -93,15 +93,15 @@ RTMP_RF_REGS RF2850RegTable[] = {
        {62, 0x98402ec8, 0x984c0692, 0x98158a55, 0x980ed193}
        ,
        {64, 0x98402ec8, 0x984c0692, 0x98158a55, 0x980ed1a3}
-       ,                       // Plugfest#4, Day4, change RFR3 left4th 9->5.
+       ,                       /* Plugfest#4, Day4, change RFR3 left4th 9->5. */
 
-       // 802.11 HyperLan 2
+       /* 802.11 HyperLan 2 */
        {100, 0x98402ec8, 0x984c06b2, 0x98178a55, 0x980ed783}
        ,
 
-       // 2008.04.30 modified
-       // The system team has AN to improve the EVM value
-       // for channel 102 to 108 for the RT2850/RT2750 dual band solution.
+       /* 2008.04.30 modified */
+       /* The system team has AN to improve the EVM value */
+       /* for channel 102 to 108 for the RT2850/RT2750 dual band solution. */
        {102, 0x98402ec8, 0x985c06b2, 0x98578a55, 0x980ed793}
        ,
        {104, 0x98402ec8, 0x985c06b2, 0x98578a55, 0x980ed1a3}
@@ -122,7 +122,7 @@ RTMP_RF_REGS RF2850RegTable[] = {
        {124, 0x98402ec4, 0x984c0382, 0x98178a55, 0x980ed193}
        ,
        {126, 0x98402ec4, 0x984c0382, 0x98178a55, 0x980ed15b}
-       ,                       // 0x980ed1bb->0x980ed15b required by Rory 20070927
+       ,                       /* 0x980ed1bb->0x980ed15b required by Rory 20070927 */
        {128, 0x98402ec4, 0x984c0382, 0x98178a55, 0x980ed1a3}
        ,
        {132, 0x98402ec4, 0x984c0386, 0x98178a55, 0x980ed18b}
@@ -134,7 +134,7 @@ RTMP_RF_REGS RF2850RegTable[] = {
        {140, 0x98402ec4, 0x984c038a, 0x98178a55, 0x980ed183}
        ,
 
-       // 802.11 UNII
+       /* 802.11 UNII */
        {149, 0x98402ec4, 0x984c038a, 0x98178a55, 0x980ed1a7}
        ,
        {151, 0x98402ec4, 0x984c038e, 0x98178a55, 0x980ed187}
@@ -158,7 +158,7 @@ RTMP_RF_REGS RF2850RegTable[] = {
        {173, 0x98402ec4, 0x984c03d6, 0x98179855, 0x9815530f}
        ,
 
-       // Japan
+       /* Japan */
        {184, 0x95002ccc, 0x9500491e, 0x9509be55, 0x950c0a0b}
        ,
        {188, 0x95002ccc, 0x95004922, 0x9509be55, 0x950c0a13}
@@ -174,18 +174,18 @@ RTMP_RF_REGS RF2850RegTable[] = {
        {216, 0x95002ccc, 0x95004982, 0x9509be55, 0x950c0a23}
        ,
 
-       // still lack of MMAC(Japan) ch 34,38,42,46
+       /* still lack of MMAC(Japan) ch 34,38,42,46 */
 };
 
 UCHAR NUM_OF_2850_CHNL = (sizeof(RF2850RegTable) / sizeof(RTMP_RF_REGS));
 
 FREQUENCY_ITEM FreqItems3020[] = {
        /**************************************************/
-       // ISM : 2.4 to 2.483 GHz                         //
+       /* ISM : 2.4 to 2.483 GHz                         // */
        /**************************************************/
-       // 11g
+       /* 11g */
        /**************************************************/
-       //-CH---N-------R---K-----------
+       /*-CH---N-------R---K----------- */
        {1, 241, 2, 2}
        ,
        {2, 241, 2, 7}
@@ -227,7 +227,7 @@ VOID AsicUpdateAutoFallBackTable(IN PRTMP_ADAPTER pAd, IN PUCHAR pRateTable)
        LG_FBK_CFG1_STRUC LgCfg1;
        PRTMP_TX_RATE_SWITCH pCurrTxRate, pNextTxRate;
 
-       // set to initial value
+       /* set to initial value */
        HtCfg0.word = 0x65432100;
        HtCfg1.word = 0xedcba988;
        LgCfg0.word = 0xedcba988;
@@ -237,9 +237,9 @@ VOID AsicUpdateAutoFallBackTable(IN PRTMP_ADAPTER pAd, IN PUCHAR pRateTable)
        for (i = 1; i < *((PUCHAR) pRateTable); i++) {
                pCurrTxRate = (PRTMP_TX_RATE_SWITCH) pRateTable + 1 + i;
                switch (pCurrTxRate->Mode) {
-               case 0: //CCK
+               case 0: /*CCK */
                        break;
-               case 1: //OFDM
+               case 1: /*OFDM */
                        {
                                switch (pCurrTxRate->CurrMCS) {
                                case 0:
@@ -309,8 +309,8 @@ VOID AsicUpdateAutoFallBackTable(IN PRTMP_ADAPTER pAd, IN PUCHAR pRateTable)
                                }
                        }
                        break;
-               case 2: //HT-MIX
-               case 3: //HT-GF
+               case 2: /*HT-MIX */
+               case 3: /*HT-GF */
                        {
                                if ((pNextTxRate->Mode >= MODE_HTMIX)
                                    && (pCurrTxRate->CurrMCS !=
@@ -433,16 +433,16 @@ VOID AsicUpdateProtect(IN PRTMP_ADAPTER pAd,
        }
 
        if (pAd->BATable.numDoneOriginator) {
-               //
-               // enable the RTS/CTS to avoid channel collision
-               //
+               /* */
+               /* enable the RTS/CTS to avoid channel collision */
+               /* */
                SetMask = ALLN_SETPROTECT;
                OperationMode = 8;
        }
-       // Config ASIC RTS threshold register
+       /* Config ASIC RTS threshold register */
        RTMP_IO_READ32(pAd, TX_RTS_CFG, &MacReg);
        MacReg &= 0xFF0000FF;
-       // If the user want disable RtsThreshold and enable Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
+       /* If the user want disable RtsThreshold and enable Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096 */
        if (((pAd->CommonCfg.BACapability.field.AmsduEnable) ||
             (pAd->CommonCfg.bAggregationCapable == TRUE))
            && pAd->CommonCfg.RtsThreshold == MAX_RTS_THRESHOLD) {
@@ -453,7 +453,7 @@ VOID AsicUpdateProtect(IN PRTMP_ADAPTER pAd,
 
        RTMP_IO_WRITE32(pAd, TX_RTS_CFG, MacReg);
 
-       // Initial common protection settings
+       /* Initial common protection settings */
        RTMPZeroMemory(Protect, sizeof(Protect));
        ProtCfg4.word = 0;
        ProtCfg.word = 0;
@@ -466,72 +466,72 @@ VOID AsicUpdateProtect(IN PRTMP_ADAPTER pAd,
        ProtCfg.field.RTSThEn = 1;
        ProtCfg.field.ProtectNav = ASIC_SHORTNAV;
 
-       // update PHY mode and rate
+       /* update PHY mode and rate */
        if (pAd->CommonCfg.Channel > 14)
                ProtCfg.field.ProtectRate = 0x4000;
        ProtCfg.field.ProtectRate |= pAd->CommonCfg.RtsRate;
 
-       // Handle legacy(B/G) protection
+       /* Handle legacy(B/G) protection */
        if (bDisableBGProtect) {
-               //ProtCfg.field.ProtectRate = pAd->CommonCfg.RtsRate;
+               /*ProtCfg.field.ProtectRate = pAd->CommonCfg.RtsRate; */
                ProtCfg.field.ProtectCtrl = 0;
                Protect[0] = ProtCfg.word;
                Protect[1] = ProtCfg.word;
                pAd->FlgCtsEnabled = 0; /* CTS-self is not used */
        } else {
-               //ProtCfg.field.ProtectRate = pAd->CommonCfg.RtsRate;
-               ProtCfg.field.ProtectCtrl = 0;  // CCK do not need to be protected
+               /*ProtCfg.field.ProtectRate = pAd->CommonCfg.RtsRate; */
+               ProtCfg.field.ProtectCtrl = 0;  /* CCK do not need to be protected */
                Protect[0] = ProtCfg.word;
-               ProtCfg.field.ProtectCtrl = ASIC_CTS;   // OFDM needs using CCK to protect
+               ProtCfg.field.ProtectCtrl = ASIC_CTS;   /* OFDM needs using CCK to protect */
                Protect[1] = ProtCfg.word;
                pAd->FlgCtsEnabled = 1; /* CTS-self is used */
        }
 
-       // Decide HT frame protection.
+       /* Decide HT frame protection. */
        if ((SetMask & ALLN_SETPROTECT) != 0) {
                switch (OperationMode) {
                case 0x0:
-                       // NO PROTECT
-                       // 1.All STAs in the BSS are 20/40 MHz HT
-                       // 2. in ai 20/40MHz BSS
-                       // 3. all STAs are 20MHz in a 20MHz BSS
-                       // Pure HT. no protection.
-
-                       // MM20_PROT_CFG
-                       //      Reserved (31:27)
-                       //      PROT_TXOP(25:20) -- 010111
-                       //      PROT_NAV(19:18)  -- 01 (Short NAV protection)
-                       //  PROT_CTRL(17:16) -- 00 (None)
-                       //      PROT_RATE(15:0)  -- 0x4004 (OFDM 24M)
+                       /* NO PROTECT */
+                       /* 1.All STAs in the BSS are 20/40 MHz HT */
+                       /* 2. in ai 20/40MHz BSS */
+                       /* 3. all STAs are 20MHz in a 20MHz BSS */
+                       /* Pure HT. no protection. */
+
+                       /* MM20_PROT_CFG */
+                       /*      Reserved (31:27) */
+                       /*      PROT_TXOP(25:20) -- 010111 */
+                       /*      PROT_NAV(19:18)  -- 01 (Short NAV protection) */
+                       /*  PROT_CTRL(17:16) -- 00 (None) */
+                       /*      PROT_RATE(15:0)  -- 0x4004 (OFDM 24M) */
                        Protect[2] = 0x01744004;
 
-                       // MM40_PROT_CFG
-                       //      Reserved (31:27)
-                       //      PROT_TXOP(25:20) -- 111111
-                       //      PROT_NAV(19:18)  -- 01 (Short NAV protection)
-                       //  PROT_CTRL(17:16) -- 00 (None)
-                       //      PROT_RATE(15:0)  -- 0x4084 (duplicate OFDM 24M)
+                       /* MM40_PROT_CFG */
+                       /*      Reserved (31:27) */
+                       /*      PROT_TXOP(25:20) -- 111111 */
+                       /*      PROT_NAV(19:18)  -- 01 (Short NAV protection) */
+                       /*  PROT_CTRL(17:16) -- 00 (None) */
+                       /*      PROT_RATE(15:0)  -- 0x4084 (duplicate OFDM 24M) */
                        Protect[3] = 0x03f44084;
 
-                       // CF20_PROT_CFG
-                       //      Reserved (31:27)
-                       //      PROT_TXOP(25:20) -- 010111
-                       //      PROT_NAV(19:18)  -- 01 (Short NAV protection)
-                       //  PROT_CTRL(17:16) -- 00 (None)
-                       //      PROT_RATE(15:0)  -- 0x4004 (OFDM 24M)
+                       /* CF20_PROT_CFG */
+                       /*      Reserved (31:27) */
+                       /*      PROT_TXOP(25:20) -- 010111 */
+                       /*      PROT_NAV(19:18)  -- 01 (Short NAV protection) */
+                       /*  PROT_CTRL(17:16) -- 00 (None) */
+                       /*      PROT_RATE(15:0)  -- 0x4004 (OFDM 24M) */
                        Protect[4] = 0x01744004;
 
-                       // CF40_PROT_CFG
-                       //      Reserved (31:27)
-                       //      PROT_TXOP(25:20) -- 111111
-                       //      PROT_NAV(19:18)  -- 01 (Short NAV protection)
-                       //  PROT_CTRL(17:16) -- 00 (None)
-                       //      PROT_RATE(15:0)  -- 0x4084 (duplicate OFDM 24M)
+                       /* CF40_PROT_CFG */
+                       /*      Reserved (31:27) */
+                       /*      PROT_TXOP(25:20) -- 111111 */
+                       /*      PROT_NAV(19:18)  -- 01 (Short NAV protection) */
+                       /*  PROT_CTRL(17:16) -- 00 (None) */
+                       /*      PROT_RATE(15:0)  -- 0x4084 (duplicate OFDM 24M) */
                        Protect[5] = 0x03f44084;
 
                        if (bNonGFExist) {
-                               // PROT_NAV(19:18)  -- 01 (Short NAV protectiion)
-                               // PROT_CTRL(17:16) -- 01 (RTS/CTS)
+                               /* PROT_NAV(19:18)  -- 01 (Short NAV protectiion) */
+                               /* PROT_CTRL(17:16) -- 01 (RTS/CTS) */
                                Protect[4] = 0x01754004;
                                Protect[5] = 0x03f54084;
                        }
@@ -539,16 +539,16 @@ VOID AsicUpdateProtect(IN PRTMP_ADAPTER pAd,
                        break;
 
                case 1:
-                       // This is "HT non-member protection mode."
-                       // If there may be non-HT STAs my BSS
-                       ProtCfg.word = 0x01744004;      // PROT_CTRL(17:16) : 0 (None)
-                       ProtCfg4.word = 0x03f44084;     // duplicaet legacy 24M. BW set 1.
+                       /* This is "HT non-member protection mode." */
+                       /* If there may be non-HT STAs my BSS */
+                       ProtCfg.word = 0x01744004;      /* PROT_CTRL(17:16) : 0 (None) */
+                       ProtCfg4.word = 0x03f44084;     /* duplicaet legacy 24M. BW set 1. */
                        if (OPSTATUS_TEST_FLAG
                            (pAd, fOP_STATUS_BG_PROTECTION_INUSED)) {
-                               ProtCfg.word = 0x01740003;      //ERP use Protection bit is set, use protection rate at Clause 18..
-                               ProtCfg4.word = 0x03f40003;     // Don't duplicate RTS/CTS in CCK mode. 0x03f40083;
+                               ProtCfg.word = 0x01740003;      /*ERP use Protection bit is set, use protection rate at Clause 18.. */
+                               ProtCfg4.word = 0x03f40003;     /* Don't duplicate RTS/CTS in CCK mode. 0x03f40083; */
                        }
-                       //Assign Protection method for 20&40 MHz packets
+                       /*Assign Protection method for 20&40 MHz packets */
                        ProtCfg.field.ProtectCtrl = ASIC_RTS;
                        ProtCfg.field.ProtectNav = ASIC_SHORTNAV;
                        ProtCfg4.field.ProtectCtrl = ASIC_RTS;
@@ -561,11 +561,11 @@ VOID AsicUpdateProtect(IN PRTMP_ADAPTER pAd,
                        break;
 
                case 2:
-                       // If only HT STAs are in BSS. at least one is 20MHz. Only protect 40MHz packets
-                       ProtCfg.word = 0x01744004;      // PROT_CTRL(17:16) : 0 (None)
-                       ProtCfg4.word = 0x03f44084;     // duplicaet legacy 24M. BW set 1.
+                       /* If only HT STAs are in BSS. at least one is 20MHz. Only protect 40MHz packets */
+                       ProtCfg.word = 0x01744004;      /* PROT_CTRL(17:16) : 0 (None) */
+                       ProtCfg4.word = 0x03f44084;     /* duplicaet legacy 24M. BW set 1. */
 
-                       //Assign Protection method for 40MHz packets
+                       /*Assign Protection method for 40MHz packets */
                        ProtCfg4.field.ProtectCtrl = ASIC_RTS;
                        ProtCfg4.field.ProtectNav = ASIC_SHORTNAV;
                        Protect[2] = ProtCfg.word;
@@ -581,17 +581,17 @@ VOID AsicUpdateProtect(IN PRTMP_ADAPTER pAd,
                        break;
 
                case 3:
-                       // HT mixed mode.        PROTECT ALL!
-                       // Assign Rate
-                       ProtCfg.word = 0x01744004;      //duplicaet legacy 24M. BW set 1.
+                       /* HT mixed mode.        PROTECT ALL! */
+                       /* Assign Rate */
+                       ProtCfg.word = 0x01744004;      /*duplicaet legacy 24M. BW set 1. */
                        ProtCfg4.word = 0x03f44084;
-                       // both 20MHz and 40MHz are protected. Whether use RTS or CTS-to-self depends on the
+                       /* both 20MHz and 40MHz are protected. Whether use RTS or CTS-to-self depends on the */
                        if (OPSTATUS_TEST_FLAG
                            (pAd, fOP_STATUS_BG_PROTECTION_INUSED)) {
-                               ProtCfg.word = 0x01740003;      //ERP use Protection bit is set, use protection rate at Clause 18..
-                               ProtCfg4.word = 0x03f40003;     // Don't duplicate RTS/CTS in CCK mode. 0x03f40083
+                               ProtCfg.word = 0x01740003;      /*ERP use Protection bit is set, use protection rate at Clause 18.. */
+                               ProtCfg4.word = 0x03f40003;     /* Don't duplicate RTS/CTS in CCK mode. 0x03f40083 */
                        }
-                       //Assign Protection method for 20&40 MHz packets
+                       /*Assign Protection method for 20&40 MHz packets */
                        ProtCfg.field.ProtectCtrl = ASIC_RTS;
                        ProtCfg.field.ProtectNav = ASIC_SHORTNAV;
                        ProtCfg4.field.ProtectCtrl = ASIC_RTS;
@@ -604,7 +604,7 @@ VOID AsicUpdateProtect(IN PRTMP_ADAPTER pAd,
                        break;
 
                case 8:
-                       // Special on for Atheros problem n chip.
+                       /* Special on for Atheros problem n chip. */
                        Protect[2] = 0x01754004;
                        Protect[3] = 0x03f54084;
                        Protect[4] = 0x01754004;
@@ -634,17 +634,17 @@ VOID AsicUpdateProtect(IN PRTMP_ADAPTER pAd,
 VOID AsicSwitchChannel(IN PRTMP_ADAPTER pAd, IN UCHAR Channel, IN BOOLEAN bScan)
 {
        ULONG R2 = 0, R3 = DEFAULT_RF_TX_POWER, R4 = 0;
-       CHAR TxPwer = 0, TxPwer2 = DEFAULT_RF_TX_POWER; //Bbp94 = BBPR94_DEFAULT, TxPwer2 = DEFAULT_RF_TX_POWER;
+       CHAR TxPwer = 0, TxPwer2 = DEFAULT_RF_TX_POWER; /*Bbp94 = BBPR94_DEFAULT, TxPwer2 = DEFAULT_RF_TX_POWER; */
        UCHAR index;
-       UINT32 Value = 0;       //BbpReg, Value;
+       UINT32 Value = 0;       /*BbpReg, Value; */
        RTMP_RF_REGS *RFRegTable;
        UCHAR RFValue;
 
        RFValue = 0;
-       // Search Tx power value
-       // We can't use ChannelList to search channel, since some central channl's txpowr doesn't list
-       // in ChannelList, so use TxPower array instead.
-       //
+       /* Search Tx power value */
+       /* We can't use ChannelList to search channel, since some central channl's txpowr doesn't list */
+       /* in ChannelList, so use TxPower array instead. */
+       /* */
        for (index = 0; index < MAX_NUM_OF_CHANNELS; index++) {
                if (Channel == pAd->TxPower[index].Channel) {
                        TxPwer = pAd->TxPower[index].Power;
@@ -659,7 +659,7 @@ VOID AsicSwitchChannel(IN PRTMP_ADAPTER pAd, IN UCHAR Channel, IN BOOLEAN bScan)
                          Channel));
        }
 #ifdef RT30xx
-       // The RF programming sequence is difference between 3xxx and 2xxx
+       /* The RF programming sequence is difference between 3xxx and 2xxx */
        if ((IS_RT3070(pAd) || IS_RT3090(pAd) || IS_RT3390(pAd))
            && ((pAd->RfIcType == RFIC_3020) || (pAd->RfIcType == RFIC_2020)
                || (pAd->RfIcType == RFIC_3021)
@@ -668,7 +668,7 @@ VOID AsicSwitchChannel(IN PRTMP_ADAPTER pAd, IN UCHAR Channel, IN BOOLEAN bScan)
 
                for (index = 0; index < NUM_OF_3020_CHNL; index++) {
                        if (Channel == FreqItems3020[index].Channel) {
-                               // Programming channel parameters
+                               /* Programming channel parameters */
                                RT30xxWriteRFRegister(pAd, RF_R02,
                                                      FreqItems3020[index].N);
                                RT30xxWriteRFRegister(pAd, RF_R03,
@@ -678,21 +678,21 @@ VOID AsicSwitchChannel(IN PRTMP_ADAPTER pAd, IN UCHAR Channel, IN BOOLEAN bScan)
                                    (RFValue & 0xFC) | FreqItems3020[index].R;
                                RT30xxWriteRFRegister(pAd, RF_R06, RFValue);
 
-                               // Set Tx0 Power
+                               /* Set Tx0 Power */
                                RT30xxReadRFRegister(pAd, RF_R12, &RFValue);
                                RFValue = (RFValue & 0xE0) | TxPwer;
                                RT30xxWriteRFRegister(pAd, RF_R12, RFValue);
 
-                               // Set Tx1 Power
+                               /* Set Tx1 Power */
                                RT30xxReadRFRegister(pAd, RF_R13, &RFValue);
                                RFValue = (RFValue & 0xE0) | TxPwer2;
                                RT30xxWriteRFRegister(pAd, RF_R13, RFValue);
 
-                               // Tx/Rx Stream setting
+                               /* Tx/Rx Stream setting */
                                RT30xxReadRFRegister(pAd, RF_R01, &RFValue);
-                               //if (IS_RT3090(pAd))
-                               //      RFValue |= 0x01; // Enable RF block.
-                               RFValue &= 0x03;        //clear bit[7~2]
+                               /*if (IS_RT3090(pAd)) */
+                               /*      RFValue |= 0x01; // Enable RF block. */
+                               RFValue &= 0x03;        /*clear bit[7~2] */
                                if (pAd->Antenna.field.TxPath == 1)
                                        RFValue |= 0xA0;
                                else if (pAd->Antenna.field.TxPath == 2)
@@ -703,28 +703,28 @@ VOID AsicSwitchChannel(IN PRTMP_ADAPTER pAd, IN UCHAR Channel, IN BOOLEAN bScan)
                                        RFValue |= 0x40;
                                RT30xxWriteRFRegister(pAd, RF_R01, RFValue);
 
-                               // Set RF offset
+                               /* Set RF offset */
                                RT30xxReadRFRegister(pAd, RF_R23, &RFValue);
                                RFValue = (RFValue & 0x80) | pAd->RfFreqOffset;
                                RT30xxWriteRFRegister(pAd, RF_R23, RFValue);
 
-                               // Set BW
+                               /* Set BW */
                                if (!bScan
                                    && (pAd->CommonCfg.BBPCurrentBW == BW_40)) {
                                        RFValue = pAd->Mlme.CaliBW40RfR24;
-                                       //DISABLE_11N_CHECK(pAd);
+                                       /*DISABLE_11N_CHECK(pAd); */
                                } else {
                                        RFValue = pAd->Mlme.CaliBW20RfR24;
                                }
                                RT30xxWriteRFRegister(pAd, RF_R24, RFValue);
                                RT30xxWriteRFRegister(pAd, RF_R31, RFValue);
 
-                               // Enable RF tuning
+                               /* Enable RF tuning */
                                RT30xxReadRFRegister(pAd, RF_R07, &RFValue);
                                RFValue = RFValue | 0x1;
                                RT30xxWriteRFRegister(pAd, RF_R07, RFValue);
 
-                               // latch channel for future usage.
+                               /* latch channel for future usage. */
                                pAd->LatchRfRegs.Channel = Channel;
 
                                DBGPRINT(RT_DEBUG_TRACE,
@@ -739,7 +739,7 @@ VOID AsicSwitchChannel(IN PRTMP_ADAPTER pAd, IN UCHAR Channel, IN BOOLEAN bScan)
                        }
                }
        } else
-#endif // RT30xx //
+#endif /* RT30xx // */
        {
                RFRegTable = RF2850RegTable;
                switch (pAd->RfIcType) {
@@ -752,26 +752,26 @@ VOID AsicSwitchChannel(IN PRTMP_ADAPTER pAd, IN UCHAR Channel, IN BOOLEAN bScan)
                                if (Channel == RFRegTable[index].Channel) {
                                        R2 = RFRegTable[index].R2;
                                        if (pAd->Antenna.field.TxPath == 1) {
-                                               R2 |= 0x4000;   // If TXpath is 1, bit 14 = 1;
+                                               R2 |= 0x4000;   /* If TXpath is 1, bit 14 = 1; */
                                        }
 
                                        if (pAd->Antenna.field.RxPath == 2) {
-                                               R2 |= 0x40;     // write 1 to off Rxpath.
+                                               R2 |= 0x40;     /* write 1 to off Rxpath. */
                                        } else if (pAd->Antenna.field.RxPath ==
                                                   1) {
-                                               R2 |= 0x20040;  // write 1 to off RxPath
+                                               R2 |= 0x20040;  /* write 1 to off RxPath */
                                        }
 
                                        if (Channel > 14) {
-                                               // initialize R3, R4
+                                               /* initialize R3, R4 */
                                                R3 = (RFRegTable[index].
                                                      R3 & 0xffffc1ff);
                                                R4 = (RFRegTable[index].
                                                      R4 & (~0x001f87c0)) |
                                                    (pAd->RfFreqOffset << 15);
 
-                                               // 5G band power range: 0xF9~0X0F, TX0 Reg3 bit9/TX1 Reg4 bit6="0" means the TX power reduce 7dB
-                                               // R3
+                                               /* 5G band power range: 0xF9~0X0F, TX0 Reg3 bit9/TX1 Reg4 bit6="0" means the TX power reduce 7dB */
+                                               /* R3 */
                                                if ((TxPwer >= -7)
                                                    && (TxPwer < 0)) {
                                                        TxPwer = (7 + TxPwer);
@@ -794,7 +794,7 @@ VOID AsicSwitchChannel(IN PRTMP_ADAPTER pAd, IN UCHAR Channel, IN BOOLEAN bScan)
                                                                              9);
                                                }
 
-                                               // R4
+                                               /* R4 */
                                                if ((TxPwer2 >= -7)
                                                    && (TxPwer2 < 0)) {
                                                        TxPwer2 = (7 + TxPwer2);
@@ -817,17 +817,17 @@ VOID AsicSwitchChannel(IN PRTMP_ADAPTER pAd, IN UCHAR Channel, IN BOOLEAN bScan)
                                                                              6);
                                                }
                                        } else {
-                                               R3 = (RFRegTable[index].R3 & 0xffffc1ff) | (TxPwer << 9);       // set TX power0
-                                               R4 = (RFRegTable[index].R4 & (~0x001f87c0)) | (pAd->RfFreqOffset << 15) | (TxPwer2 << 6);       // Set freq Offset & TxPwr1
+                                               R3 = (RFRegTable[index].R3 & 0xffffc1ff) | (TxPwer << 9);       /* set TX power0 */
+                                               R4 = (RFRegTable[index].R4 & (~0x001f87c0)) | (pAd->RfFreqOffset << 15) | (TxPwer2 << 6);       /* Set freq Offset & TxPwr1 */
                                        }
 
-                                       // Based on BBP current mode before changing RF channel.
+                                       /* Based on BBP current mode before changing RF channel. */
                                        if (!bScan
                                            && (pAd->CommonCfg.BBPCurrentBW ==
                                                BW_40)) {
                                                R4 |= 0x200000;
                                        }
-                                       // Update variables
+                                       /* Update variables */
                                        pAd->LatchRfRegs.Channel = Channel;
                                        pAd->LatchRfRegs.R1 =
                                            RFRegTable[index].R1;
@@ -835,7 +835,7 @@ VOID AsicSwitchChannel(IN PRTMP_ADAPTER pAd, IN UCHAR Channel, IN BOOLEAN bScan)
                                        pAd->LatchRfRegs.R3 = R3;
                                        pAd->LatchRfRegs.R4 = R4;
 
-                                       // Set RF value 1's set R3[bit2] = [0]
+                                       /* Set RF value 1's set R3[bit2] = [0] */
                                        RTMP_RF_IO_WRITE32(pAd,
                                                           pAd->LatchRfRegs.R1);
                                        RTMP_RF_IO_WRITE32(pAd,
@@ -848,7 +848,7 @@ VOID AsicSwitchChannel(IN PRTMP_ADAPTER pAd, IN UCHAR Channel, IN BOOLEAN bScan)
 
                                        RTMPusecDelay(200);
 
-                                       // Set RF value 2's set R3[bit2] = [1]
+                                       /* Set RF value 2's set R3[bit2] = [1] */
                                        RTMP_RF_IO_WRITE32(pAd,
                                                           pAd->LatchRfRegs.R1);
                                        RTMP_RF_IO_WRITE32(pAd,
@@ -861,7 +861,7 @@ VOID AsicSwitchChannel(IN PRTMP_ADAPTER pAd, IN UCHAR Channel, IN BOOLEAN bScan)
 
                                        RTMPusecDelay(200);
 
-                                       // Set RF value 3's set R3[bit2] = [0]
+                                       /* Set RF value 3's set R3[bit2] = [0] */
                                        RTMP_RF_IO_WRITE32(pAd,
                                                           pAd->LatchRfRegs.R1);
                                        RTMP_RF_IO_WRITE32(pAd,
@@ -889,9 +889,9 @@ VOID AsicSwitchChannel(IN PRTMP_ADAPTER pAd, IN UCHAR Channel, IN BOOLEAN bScan)
                          pAd->LatchRfRegs.R3, pAd->LatchRfRegs.R4));
        }
 
-       // Change BBP setting during siwtch from a->g, g->a
+       /* Change BBP setting during siwtch from a->g, g->a */
        if (Channel <= 14) {
-               ULONG TxPinCfg = 0x00050F0A;    //Gary 2007/08/09 0x050A0A
+               ULONG TxPinCfg = 0x00050F0A;    /*Gary 2007/08/09 0x050A0A */
 
                RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R62,
                                             (0x37 - GET_LNA_GAIN(pAd)));
@@ -899,10 +899,10 @@ VOID AsicSwitchChannel(IN PRTMP_ADAPTER pAd, IN UCHAR Channel, IN BOOLEAN bScan)
                                             (0x37 - GET_LNA_GAIN(pAd)));
                RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R64,
                                             (0x37 - GET_LNA_GAIN(pAd)));
-               RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R86, 0);  //(0x44 - GET_LNA_GAIN(pAd)));    // According the Rory's suggestion to solve the middle range issue.
-               //RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0x62);
+               RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R86, 0);  /*(0x44 - GET_LNA_GAIN(pAd)));    // According the Rory's suggestion to solve the middle range issue. */
+               /*RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0x62); */
 
-               // Rx High power VGA offset for LNA select
+               /* Rx High power VGA offset for LNA select */
                if (pAd->NicConfig2.field.ExternalLNAForG) {
                        RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0x62);
                        RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R75, 0x46);
@@ -911,13 +911,13 @@ VOID AsicSwitchChannel(IN PRTMP_ADAPTER pAd, IN UCHAR Channel, IN BOOLEAN bScan)
                        RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R75, 0x50);
                }
 
-               // 5G band selection PIN, bit1 and bit2 are complement
+               /* 5G band selection PIN, bit1 and bit2 are complement */
                RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value);
                Value &= (~0x6);
                Value |= (0x04);
                RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);
 
-               // Turn off unused PA or LNA when only 1T or 1R
+               /* Turn off unused PA or LNA when only 1T or 1R */
                if (pAd->Antenna.field.TxPath == 1) {
                        TxPinCfg &= 0xFFFFFFF3;
                }
@@ -928,7 +928,7 @@ VOID AsicSwitchChannel(IN PRTMP_ADAPTER pAd, IN UCHAR Channel, IN BOOLEAN bScan)
                RTMP_IO_WRITE32(pAd, TX_PIN_CFG, TxPinCfg);
 
 #if defined(RT3090) || defined(RT3390)
-               // PCIe PHY Transmit attenuation adjustment
+               /* PCIe PHY Transmit attenuation adjustment */
                if (IS_RT3090A(pAd) || IS_RT3390(pAd)) {
                        TX_ATTENUATION_CTRL_STRUC TxAttenuationCtrl = {
                        .word = 0};
@@ -936,14 +936,14 @@ VOID AsicSwitchChannel(IN PRTMP_ADAPTER pAd, IN UCHAR Channel, IN BOOLEAN bScan)
                        RTMP_IO_READ32(pAd, PCIE_PHY_TX_ATTENUATION_CTRL,
                                       &TxAttenuationCtrl.word);
 
-                       if (Channel == 14)      // Channel #14
+                       if (Channel == 14)      /* Channel #14 */
                        {
-                               TxAttenuationCtrl.field.PCIE_PHY_TX_ATTEN_EN = 1;       // Enable PCIe PHY Tx attenuation
-                               TxAttenuationCtrl.field.PCIE_PHY_TX_ATTEN_VALUE = 4;    // 9/16 full drive level
-                       } else  // Channel #1~#13
+                               TxAttenuationCtrl.field.PCIE_PHY_TX_ATTEN_EN = 1;       /* Enable PCIe PHY Tx attenuation */
+                               TxAttenuationCtrl.field.PCIE_PHY_TX_ATTEN_VALUE = 4;    /* 9/16 full drive level */
+                       } else  /* Channel #1~#13 */
                        {
-                               TxAttenuationCtrl.field.PCIE_PHY_TX_ATTEN_EN = 0;       // Disable PCIe PHY Tx attenuation
-                               TxAttenuationCtrl.field.PCIE_PHY_TX_ATTEN_VALUE = 0;    // n/a
+                               TxAttenuationCtrl.field.PCIE_PHY_TX_ATTEN_EN = 0;       /* Disable PCIe PHY Tx attenuation */
+                               TxAttenuationCtrl.field.PCIE_PHY_TX_ATTEN_VALUE = 0;    /* n/a */
                        }
 
                        RTMP_IO_WRITE32(pAd, PCIE_PHY_TX_ATTENUATION_CTRL,
@@ -951,7 +951,7 @@ VOID AsicSwitchChannel(IN PRTMP_ADAPTER pAd, IN UCHAR Channel, IN BOOLEAN bScan)
                }
 #endif
        } else {
-               ULONG TxPinCfg = 0x00050F05;    //Gary 2007/8/9 0x050505
+               ULONG TxPinCfg = 0x00050F05;    /*Gary 2007/8/9 0x050505 */
 
                RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R62,
                                             (0x37 - GET_LNA_GAIN(pAd)));
@@ -959,23 +959,23 @@ VOID AsicSwitchChannel(IN PRTMP_ADAPTER pAd, IN UCHAR Channel, IN BOOLEAN bScan)
                                             (0x37 - GET_LNA_GAIN(pAd)));
                RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R64,
                                             (0x37 - GET_LNA_GAIN(pAd)));
-               RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R86, 0);  //(0x44 - GET_LNA_GAIN(pAd)));   // According the Rory's suggestion to solve the middle range issue.
+               RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R86, 0);  /*(0x44 - GET_LNA_GAIN(pAd)));   // According the Rory's suggestion to solve the middle range issue. */
                RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0xF2);
 
-               // Rx High power VGA offset for LNA select
+               /* Rx High power VGA offset for LNA select */
                if (pAd->NicConfig2.field.ExternalLNAForA) {
                        RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R75, 0x46);
                } else {
                        RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R75, 0x50);
                }
 
-               // 5G band selection PIN, bit1 and bit2 are complement
+               /* 5G band selection PIN, bit1 and bit2 are complement */
                RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value);
                Value &= (~0x6);
                Value |= (0x02);
                RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);
 
-               // Turn off unused PA or LNA when only 1T or 1R
+               /* Turn off unused PA or LNA when only 1T or 1R */
                if (pAd->Antenna.field.TxPath == 1) {
                        TxPinCfg &= 0xFFFFFFF3;
                }
@@ -987,18 +987,18 @@ VOID AsicSwitchChannel(IN PRTMP_ADAPTER pAd, IN UCHAR Channel, IN BOOLEAN bScan)
 
        }
 
-       // R66 should be set according to Channel and use 20MHz when scanning
-       //RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, (0x2E + GET_LNA_GAIN(pAd)));
+       /* R66 should be set according to Channel and use 20MHz when scanning */
+       /*RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, (0x2E + GET_LNA_GAIN(pAd))); */
        if (bScan)
                RTMPSetAGCInitValue(pAd, BW_20);
        else
                RTMPSetAGCInitValue(pAd, pAd->CommonCfg.BBPCurrentBW);
 
-       //
-       // On 11A, We should delay and wait RF/BBP to be stable
-       // and the appropriate time should be 1000 micro seconds
-       // 2005/06/05 - On 11G, We also need this delay time. Otherwise it's difficult to pass the WHQL.
-       //
+       /* */
+       /* On 11A, We should delay and wait RF/BBP to be stable */
+       /* and the appropriate time should be 1000 micro seconds */
+       /* 2005/06/05 - On 11G, We also need this delay time. Otherwise it's difficult to pass the WHQL. */
+       /* */
        RTMPusecDelay(1000);
 }
 
@@ -1006,7 +1006,7 @@ VOID AsicResetBBPAgent(IN PRTMP_ADAPTER pAd)
 {
        BBP_CSR_CFG_STRUC BbpCsr;
        DBGPRINT(RT_DEBUG_ERROR, ("Reset BBP Agent busy bit.!! \n"));
-       // Still need to find why BBP agent keeps busy, but in fact, hardware still function ok. Now clear busy first.
+       /* Still need to find why BBP agent keeps busy, but in fact, hardware still function ok. Now clear busy first. */
        RTMP_IO_READ32(pAd, H2M_BBP_AGENT, &BbpCsr.word);
        BbpCsr.field.Busy = 0;
        RTMP_IO_WRITE32(pAd, H2M_BBP_AGENT, BbpCsr.word);
@@ -1067,7 +1067,7 @@ VOID AsicAdjustTxPower(IN PRTMP_ADAPTER pAd)
        if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) ||
 #ifdef RTMP_MAC_PCI
            (pAd->bPCIclkOff == TRUE) ||
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
            RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF) ||
            RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
                return;
@@ -1107,7 +1107,7 @@ VOID AsicAdjustTxPower(IN PRTMP_ADAPTER pAd)
                }
        }
 
-       // TX power compensation for temperature variation based on TSSI. try every 4 second
+       /* TX power compensation for temperature variation based on TSSI. try every 4 second */
        if (pAd->Mlme.OneSecPeriodicRound % 4 == 0) {
                if (pAd->CommonCfg.Channel <= 14) {
                        /* bg channel */
@@ -1145,30 +1145,30 @@ VOID AsicAdjustTxPower(IN PRTMP_ADAPTER pAd)
                        /* if value is 0xa5, tx power will be -= TxAgcStep*(2-1) */
 
                        if (BbpR49 > pTssiMinusBoundary[1]) {
-                               // Reading is larger than the reference value
-                               // check for how large we need to decrease the Tx power
+                               /* Reading is larger than the reference value */
+                               /* check for how large we need to decrease the Tx power */
                                for (idx = 1; idx < 5; idx++) {
-                                       if (BbpR49 <= pTssiMinusBoundary[idx])  // Found the range
+                                       if (BbpR49 <= pTssiMinusBoundary[idx])  /* Found the range */
                                                break;
                                }
-                               // The index is the step we should decrease, idx = 0 means there is nothing to compensate
-//                              if (R3 > (ULONG) (TxAgcStep * (idx-1)))
+                               /* The index is the step we should decrease, idx = 0 means there is nothing to compensate */
+/*                              if (R3 > (ULONG) (TxAgcStep * (idx-1))) */
                                *pTxAgcCompensate = -(TxAgcStep * (idx - 1));
-//                              else
-//                                      *pTxAgcCompensate = -((UCHAR)R3);
+/*                              else */
+/*                                      *pTxAgcCompensate = -((UCHAR)R3); */
 
                                DeltaPwr += (*pTxAgcCompensate);
                                DBGPRINT(RT_DEBUG_TRACE,
                                         ("-- Tx Power, BBP R1=%x, TssiRef=%x, TxAgcStep=%x, step = -%d\n",
                                          BbpR49, TssiRef, TxAgcStep, idx - 1));
                        } else if (BbpR49 < pTssiPlusBoundary[1]) {
-                               // Reading is smaller than the reference value
-                               // check for how large we need to increase the Tx power
+                               /* Reading is smaller than the reference value */
+                               /* check for how large we need to increase the Tx power */
                                for (idx = 1; idx < 5; idx++) {
-                                       if (BbpR49 >= pTssiPlusBoundary[idx])   // Found the range
+                                       if (BbpR49 >= pTssiPlusBoundary[idx])   /* Found the range */
                                                break;
                                }
-                               // The index is the step we should increase, idx = 0 means there is nothing to compensate
+                               /* The index is the step we should increase, idx = 0 means there is nothing to compensate */
                                *pTxAgcCompensate = TxAgcStep * (idx - 1);
                                DeltaPwr += (*pTxAgcCompensate);
                                DBGPRINT(RT_DEBUG_TRACE,
@@ -1198,34 +1198,34 @@ VOID AsicAdjustTxPower(IN PRTMP_ADAPTER pAd)
        BbpR1 &= 0xFC;
 
        /* calculate delta power based on the percentage specified from UI */
-       // E2PROM setting is calibrated for maximum TX power (i.e. 100%)
-       // We lower TX power here according to the percentage specified from UI
-       if (pAd->CommonCfg.TxPowerPercentage == 0xffffffff)     // AUTO TX POWER control
+       /* E2PROM setting is calibrated for maximum TX power (i.e. 100%) */
+       /* We lower TX power here according to the percentage specified from UI */
+       if (pAd->CommonCfg.TxPowerPercentage == 0xffffffff)     /* AUTO TX POWER control */
        {
                {
-                       // to patch high power issue with some APs, like Belkin N1.
+                       /* to patch high power issue with some APs, like Belkin N1. */
                        if (Rssi > -35) {
-                               BbpR1 |= 0x02;  // DeltaPwr -= 12;
+                               BbpR1 |= 0x02;  /* DeltaPwr -= 12; */
                        } else if (Rssi > -40) {
-                               BbpR1 |= 0x01;  // DeltaPwr -= 6;
+                               BbpR1 |= 0x01;  /* DeltaPwr -= 6; */
                        } else;
                }
-       } else if (pAd->CommonCfg.TxPowerPercentage > 90)       // 91 ~ 100% & AUTO, treat as 100% in terms of mW
+       } else if (pAd->CommonCfg.TxPowerPercentage > 90)       /* 91 ~ 100% & AUTO, treat as 100% in terms of mW */
                ;
-       else if (pAd->CommonCfg.TxPowerPercentage > 60) // 61 ~ 90%, treat as 75% in terms of mW               // DeltaPwr -= 1;
+       else if (pAd->CommonCfg.TxPowerPercentage > 60) /* 61 ~ 90%, treat as 75% in terms of mW               // DeltaPwr -= 1; */
        {
                DeltaPwr -= 1;
-       } else if (pAd->CommonCfg.TxPowerPercentage > 30)       // 31 ~ 60%, treat as 50% in terms of mW               // DeltaPwr -= 3;
+       } else if (pAd->CommonCfg.TxPowerPercentage > 30)       /* 31 ~ 60%, treat as 50% in terms of mW               // DeltaPwr -= 3; */
        {
                DeltaPwr -= 3;
-       } else if (pAd->CommonCfg.TxPowerPercentage > 15)       // 16 ~ 30%, treat as 25% in terms of mW               // DeltaPwr -= 6;
+       } else if (pAd->CommonCfg.TxPowerPercentage > 15)       /* 16 ~ 30%, treat as 25% in terms of mW               // DeltaPwr -= 6; */
        {
                BbpR1 |= 0x01;
-       } else if (pAd->CommonCfg.TxPowerPercentage > 9)        // 10 ~ 15%, treat as 12.5% in terms of mW             // DeltaPwr -= 9;
+       } else if (pAd->CommonCfg.TxPowerPercentage > 9)        /* 10 ~ 15%, treat as 12.5% in terms of mW             // DeltaPwr -= 9; */
        {
                BbpR1 |= 0x01;
                DeltaPwr -= 3;
-       } else                  // 0 ~ 9 %, treat as MIN(~3%) in terms of mW             // DeltaPwr -= 12;
+       } else                  /* 0 ~ 9 %, treat as MIN(~3%) in terms of mW             // DeltaPwr -= 12; */
        {
                BbpR1 |= 0x02;
        }
@@ -1334,7 +1334,7 @@ VOID AsicSetBssid(IN PRTMP_ADAPTER pAd, IN PUCHAR pBssid)
        RTMP_IO_WRITE32(pAd, MAC_BSSID_DW0, Addr4);
 
        Addr4 = 0;
-       // always one BSSID in STA mode
+       /* always one BSSID in STA mode */
        Addr4 = (ULONG) (pBssid[4]) | (ULONG) (pBssid[5] << 8);
 
        RTMP_IO_WRITE32(pAd, MAC_BSSID_DW1, Addr4);
@@ -1346,7 +1346,7 @@ VOID AsicSetMcastWC(IN PRTMP_ADAPTER pAd)
        USHORT offset;
 
        pEntry->Sst = SST_ASSOC;
-       pEntry->Aid = MCAST_WCID;       // Softap supports 1 BSSID and use WCID=0 as multicast Wcid index
+       pEntry->Aid = MCAST_WCID;       /* Softap supports 1 BSSID and use WCID=0 as multicast Wcid index */
        pEntry->PsMode = PWR_ACTIVE;
        pEntry->CurrTxRate = pAd->CommonCfg.MlmeRate;
        offset = MAC_WCID_BASE + BSS0Mcast_WCID * HW_WCID_ENTRY_SIZE;
@@ -1394,7 +1394,7 @@ VOID AsicEnableRDG(IN PRTMP_ADAPTER pAd)
        Data |= 0x80;
        RTMP_IO_WRITE32(pAd, EDCA_AC0_CFG, Data);
 
-       //OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED);
+       /*OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED); */
 }
 
 /*
@@ -1417,15 +1417,15 @@ VOID AsicDisableRDG(IN PRTMP_ADAPTER pAd)
        RTMP_IO_READ32(pAd, EDCA_AC0_CFG, &Data);
 
        Data &= 0xFFFFFF00;
-       //Data  |= 0x20;
+       /*Data  |= 0x20; */
 #ifndef WIFI_TEST
-       //if ( pAd->CommonCfg.bEnableTxBurst )
-       //      Data |= 0x60; // for performance issue not set the TXOP to 0
+       /*if ( pAd->CommonCfg.bEnableTxBurst ) */
+       /*      Data |= 0x60; // for performance issue not set the TXOP to 0 */
 #endif
        if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_DYNAMIC_BE_TXOP_ACTIVE)
            && (pAd->MacTab.fAnyStationMIMOPSDynamic == FALSE)
            ) {
-               // For CWC test, change txop from 0x30 to 0x20 in TxBurst mode
+               /* For CWC test, change txop from 0x30 to 0x20 in TxBurst mode */
                if (pAd->CommonCfg.bEnableTxBurst)
                        Data |= 0x20;
        }
@@ -1447,9 +1447,9 @@ VOID AsicDisableSync(IN PRTMP_ADAPTER pAd)
 
        DBGPRINT(RT_DEBUG_TRACE, ("--->Disable TSF synchronization\n"));
 
-       // 2003-12-20 disable TSF and TBTT while NIC in power-saving have side effect
-       //                        that NIC will never wakes up because TSF stops and no more
-       //                        TBTT interrupts
+       /* 2003-12-20 disable TSF and TBTT while NIC in power-saving have side effect */
+       /*                        that NIC will never wakes up because TSF stops and no more */
+       /*                        TBTT interrupts */
        pAd->TbttTickCount = 0;
        RTMP_IO_READ32(pAd, BCN_TIME_CFG, &csr.word);
        csr.field.bBeaconGen = 0;
@@ -1475,12 +1475,12 @@ VOID AsicEnableBssSync(IN PRTMP_ADAPTER pAd)
        DBGPRINT(RT_DEBUG_TRACE, ("--->AsicEnableBssSync(INFRA mode)\n"));
 
        RTMP_IO_READ32(pAd, BCN_TIME_CFG, &csr.word);
-//      RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, 0x00000000);
+/*      RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, 0x00000000); */
        {
-               csr.field.BeaconInterval = pAd->CommonCfg.BeaconPeriod << 4;    // ASIC register in units of 1/16 TU
+               csr.field.BeaconInterval = pAd->CommonCfg.BeaconPeriod << 4;    /* ASIC register in units of 1/16 TU */
                csr.field.bTsfTicking = 1;
-               csr.field.TsfSyncMode = 1;      // sync TSF in INFRASTRUCTURE mode
-               csr.field.bBeaconGen = 0;       // do NOT generate BEACON
+               csr.field.TsfSyncMode = 1;      /* sync TSF in INFRASTRUCTURE mode */
+               csr.field.bBeaconGen = 0;       /* do NOT generate BEACON */
                csr.field.bTBTTEnable = 1;
        }
        RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr.word);
@@ -1515,9 +1515,9 @@ VOID AsicEnableIbssSync(IN PRTMP_ADAPTER pAd)
        RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr9.word);
 
 #ifdef RTMP_MAC_PCI
-       // move BEACON TXD and frame content to on-chip memory
+       /* move BEACON TXD and frame content to on-chip memory */
        ptr = (PUCHAR) & pAd->BeaconTxWI;
-       for (i = 0; i < TXWI_SIZE; i += 4)      // 16-byte TXWI field
+       for (i = 0; i < TXWI_SIZE; i += 4)      /* 16-byte TXWI field */
        {
                UINT32 longptr =
                    *ptr + (*(ptr + 1) << 8) + (*(ptr + 2) << 16) +
@@ -1526,7 +1526,7 @@ VOID AsicEnableIbssSync(IN PRTMP_ADAPTER pAd)
                ptr += 4;
        }
 
-       // start right after the 16-byte TXWI field
+       /* start right after the 16-byte TXWI field */
        ptr = pAd->BeaconBuf;
        for (i = 0; i < pAd->BeaconTxWI.MPDUtotalByteCount; i += 4) {
                UINT32 longptr =
@@ -1535,38 +1535,38 @@ VOID AsicEnableIbssSync(IN PRTMP_ADAPTER pAd)
                RTMP_IO_WRITE32(pAd, HW_BEACON_BASE0 + TXWI_SIZE + i, longptr);
                ptr += 4;
        }
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 #ifdef RTMP_MAC_USB
-       // move BEACON TXD and frame content to on-chip memory
+       /* move BEACON TXD and frame content to on-chip memory */
        ptr = (PUCHAR) & pAd->BeaconTxWI;
-       for (i = 0; i < TXWI_SIZE; i += 2)      // 16-byte TXWI field
+       for (i = 0; i < TXWI_SIZE; i += 2)      /* 16-byte TXWI field */
        {
-               //UINT32 longptr =  *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
-               //RTMP_IO_WRITE32(pAd, HW_BEACON_BASE0 + i, longptr);
+               /*UINT32 longptr =  *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24); */
+               /*RTMP_IO_WRITE32(pAd, HW_BEACON_BASE0 + i, longptr); */
                RTUSBMultiWrite(pAd, HW_BEACON_BASE0 + i, ptr, 2);
                ptr += 2;
        }
 
-       // start right after the 16-byte TXWI field
+       /* start right after the 16-byte TXWI field */
        ptr = pAd->BeaconBuf;
        for (i = 0; i < pAd->BeaconTxWI.MPDUtotalByteCount; i += 2) {
-               //UINT32 longptr =  *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
-               //RTMP_IO_WRITE32(pAd, HW_BEACON_BASE0 + TXWI_SIZE + i, longptr);
+               /*UINT32 longptr =  *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24); */
+               /*RTMP_IO_WRITE32(pAd, HW_BEACON_BASE0 + TXWI_SIZE + i, longptr); */
                RTUSBMultiWrite(pAd, HW_BEACON_BASE0 + TXWI_SIZE + i, ptr, 2);
                ptr += 2;
        }
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
-       //
-       // For Wi-Fi faily generated beacons between participating stations.
-       // Set TBTT phase adaptive adjustment step to 8us (default 16us)
-       // don't change settings 2006-5- by Jerry
-       //RTMP_IO_WRITE32(pAd, TBTT_SYNC_CFG, 0x00001010);
+       /* */
+       /* For Wi-Fi faily generated beacons between participating stations. */
+       /* Set TBTT phase adaptive adjustment step to 8us (default 16us) */
+       /* don't change settings 2006-5- by Jerry */
+       /*RTMP_IO_WRITE32(pAd, TBTT_SYNC_CFG, 0x00001010); */
 
-       // start sending BEACON
-       csr9.field.BeaconInterval = pAd->CommonCfg.BeaconPeriod << 4;   // ASIC register in units of 1/16 TU
+       /* start sending BEACON */
+       csr9.field.BeaconInterval = pAd->CommonCfg.BeaconPeriod << 4;   /* ASIC register in units of 1/16 TU */
        csr9.field.bTsfTicking = 1;
-       csr9.field.TsfSyncMode = 2;     // sync TSF in IBSS mode
+       csr9.field.TsfSyncMode = 2;     /* sync TSF in IBSS mode */
        csr9.field.bTBTTEnable = 1;
        csr9.field.bBeaconGen = 1;
        RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr9.word);
@@ -1606,35 +1606,35 @@ VOID AsicSetEdcaParm(IN PRTMP_ADAPTER pAd, IN PEDCA_PARM pEdcaParm)
                                                         fCLIENT_STATUS_WMM_CAPABLE);
                }
 
-               //========================================================
-               //      MAC Register has a copy .
-               //========================================================
-//#ifndef WIFI_TEST
+               /*======================================================== */
+               /*      MAC Register has a copy . */
+               /*======================================================== */
+/*#ifndef WIFI_TEST */
                if (pAd->CommonCfg.bEnableTxBurst) {
-                       // For CWC test, change txop from 0x30 to 0x20 in TxBurst mode
-                       Ac0Cfg.field.AcTxop = 0x20;     // Suggest by John for TxBurst in HT Mode
+                       /* For CWC test, change txop from 0x30 to 0x20 in TxBurst mode */
+                       Ac0Cfg.field.AcTxop = 0x20;     /* Suggest by John for TxBurst in HT Mode */
                } else
-                       Ac0Cfg.field.AcTxop = 0;        // QID_AC_BE
-//#else
-//              Ac0Cfg.field.AcTxop = 0;        // QID_AC_BE
-//#endif
+                       Ac0Cfg.field.AcTxop = 0;        /* QID_AC_BE */
+/*#else */
+/*              Ac0Cfg.field.AcTxop = 0;        // QID_AC_BE */
+/*#endif */
                Ac0Cfg.field.Cwmin = CW_MIN_IN_BITS;
                Ac0Cfg.field.Cwmax = CW_MAX_IN_BITS;
                Ac0Cfg.field.Aifsn = 2;
                RTMP_IO_WRITE32(pAd, EDCA_AC0_CFG, Ac0Cfg.word);
 
-               Ac1Cfg.field.AcTxop = 0;        // QID_AC_BK
+               Ac1Cfg.field.AcTxop = 0;        /* QID_AC_BK */
                Ac1Cfg.field.Cwmin = CW_MIN_IN_BITS;
                Ac1Cfg.field.Cwmax = CW_MAX_IN_BITS;
                Ac1Cfg.field.Aifsn = 2;
                RTMP_IO_WRITE32(pAd, EDCA_AC1_CFG, Ac1Cfg.word);
 
                if (pAd->CommonCfg.PhyMode == PHY_11B) {
-                       Ac2Cfg.field.AcTxop = 192;      // AC_VI: 192*32us ~= 6ms
-                       Ac3Cfg.field.AcTxop = 96;       // AC_VO: 96*32us  ~= 3ms
+                       Ac2Cfg.field.AcTxop = 192;      /* AC_VI: 192*32us ~= 6ms */
+                       Ac3Cfg.field.AcTxop = 96;       /* AC_VO: 96*32us  ~= 3ms */
                } else {
-                       Ac2Cfg.field.AcTxop = 96;       // AC_VI: 96*32us ~= 3ms
-                       Ac3Cfg.field.AcTxop = 48;       // AC_VO: 48*32us ~= 1.5ms
+                       Ac2Cfg.field.AcTxop = 96;       /* AC_VI: 96*32us ~= 3ms */
+                       Ac3Cfg.field.AcTxop = 48;       /* AC_VO: 48*32us ~= 1.5ms */
                }
                Ac2Cfg.field.Cwmin = CW_MIN_IN_BITS;
                Ac2Cfg.field.Cwmax = CW_MAX_IN_BITS;
@@ -1645,18 +1645,18 @@ VOID AsicSetEdcaParm(IN PRTMP_ADAPTER pAd, IN PEDCA_PARM pEdcaParm)
                Ac3Cfg.field.Aifsn = 2;
                RTMP_IO_WRITE32(pAd, EDCA_AC3_CFG, Ac3Cfg.word);
 
-               //========================================================
-               //      DMA Register has a copy too.
-               //========================================================
-               csr0.field.Ac0Txop = 0; // QID_AC_BE
-               csr0.field.Ac1Txop = 0; // QID_AC_BK
+               /*======================================================== */
+               /*      DMA Register has a copy too. */
+               /*======================================================== */
+               csr0.field.Ac0Txop = 0; /* QID_AC_BE */
+               csr0.field.Ac1Txop = 0; /* QID_AC_BK */
                RTMP_IO_WRITE32(pAd, WMM_TXOP0_CFG, csr0.word);
                if (pAd->CommonCfg.PhyMode == PHY_11B) {
-                       csr1.field.Ac2Txop = 192;       // AC_VI: 192*32us ~= 6ms
-                       csr1.field.Ac3Txop = 96;        // AC_VO: 96*32us  ~= 3ms
+                       csr1.field.Ac2Txop = 192;       /* AC_VI: 192*32us ~= 6ms */
+                       csr1.field.Ac3Txop = 96;        /* AC_VO: 96*32us  ~= 3ms */
                } else {
-                       csr1.field.Ac2Txop = 96;        // AC_VI: 96*32us ~= 3ms
-                       csr1.field.Ac3Txop = 48;        // AC_VO: 48*32us ~= 1.5ms
+                       csr1.field.Ac2Txop = 96;        /* AC_VI: 96*32us ~= 3ms */
+                       csr1.field.Ac3Txop = 48;        /* AC_VO: 48*32us ~= 1.5ms */
                }
                RTMP_IO_WRITE32(pAd, WMM_TXOP1_CFG, csr1.word);
 
@@ -1679,24 +1679,24 @@ VOID AsicSetEdcaParm(IN PRTMP_ADAPTER pAd, IN PEDCA_PARM pEdcaParm)
                NdisZeroMemory(&pAd->CommonCfg.APEdcaParm, sizeof(EDCA_PARM));
        } else {
                OPSTATUS_SET_FLAG(pAd, fOP_STATUS_WMM_INUSED);
-               //========================================================
-               //      MAC Register has a copy.
-               //========================================================
-               //
-               // Modify Cwmin/Cwmax/Txop on queue[QID_AC_VI], Recommend by Jerry 2005/07/27
-               // To degrade our VIDO Queue's throughput for WiFi WMM S3T07 Issue.
-               //
-               //pEdcaParm->Txop[QID_AC_VI] = pEdcaParm->Txop[QID_AC_VI] * 7 / 10; // rt2860c need this
+               /*======================================================== */
+               /*      MAC Register has a copy. */
+               /*======================================================== */
+               /* */
+               /* Modify Cwmin/Cwmax/Txop on queue[QID_AC_VI], Recommend by Jerry 2005/07/27 */
+               /* To degrade our VIDO Queue's throughput for WiFi WMM S3T07 Issue. */
+               /* */
+               /*pEdcaParm->Txop[QID_AC_VI] = pEdcaParm->Txop[QID_AC_VI] * 7 / 10; // rt2860c need this */
 
                Ac0Cfg.field.AcTxop = pEdcaParm->Txop[QID_AC_BE];
                Ac0Cfg.field.Cwmin = pEdcaParm->Cwmin[QID_AC_BE];
                Ac0Cfg.field.Cwmax = pEdcaParm->Cwmax[QID_AC_BE];
-               Ac0Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_BE];       //+1;
+               Ac0Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_BE];       /*+1; */
 
                Ac1Cfg.field.AcTxop = pEdcaParm->Txop[QID_AC_BK];
-               Ac1Cfg.field.Cwmin = pEdcaParm->Cwmin[QID_AC_BK];       //+2;
+               Ac1Cfg.field.Cwmin = pEdcaParm->Cwmin[QID_AC_BK];       /*+2; */
                Ac1Cfg.field.Cwmax = pEdcaParm->Cwmax[QID_AC_BK];
-               Ac1Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_BK];       //+1;
+               Ac1Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_BK];       /*+1; */
 
                Ac2Cfg.field.AcTxop = (pEdcaParm->Txop[QID_AC_VI] * 6) / 10;
                if (pAd->Antenna.field.TxPath == 1) {
@@ -1709,16 +1709,16 @@ VOID AsicSetEdcaParm(IN PRTMP_ADAPTER pAd, IN PEDCA_PARM pEdcaParm)
                Ac2Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_VI] + 1;
 #ifdef RTMP_MAC_USB
                Ac2Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_VI] + 3;
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
                {
-                       // Tuning for Wi-Fi WMM S06
+                       /* Tuning for Wi-Fi WMM S06 */
                        if (pAd->CommonCfg.bWiFiTest &&
                            pEdcaParm->Aifsn[QID_AC_VI] == 10)
                                Ac2Cfg.field.Aifsn -= 1;
 
-                       // Tuning for TGn Wi-Fi 5.2.32
-                       // STA TestBed changes in this item: conexant legacy sta ==> broadcom 11n sta
+                       /* Tuning for TGn Wi-Fi 5.2.32 */
+                       /* STA TestBed changes in this item: conexant legacy sta ==> broadcom 11n sta */
                        if (STA_TGN_WIFI_ON(pAd) &&
                            pEdcaParm->Aifsn[QID_AC_VI] == 10) {
                                Ac0Cfg.field.Aifsn = 3;
@@ -1727,10 +1727,10 @@ VOID AsicSetEdcaParm(IN PRTMP_ADAPTER pAd, IN PEDCA_PARM pEdcaParm)
 #ifdef RT30xx
                        if (pAd->RfIcType == RFIC_3020
                            || pAd->RfIcType == RFIC_2020) {
-                               // Tuning for WiFi WMM S3-T07: connexant legacy sta ==> broadcom 11n sta.
+                               /* Tuning for WiFi WMM S3-T07: connexant legacy sta ==> broadcom 11n sta. */
                                Ac2Cfg.field.Aifsn = 5;
                        }
-#endif // RT30xx //
+#endif /* RT30xx // */
                }
 
                Ac3Cfg.field.AcTxop = pEdcaParm->Txop[QID_AC_VO];
@@ -1738,7 +1738,7 @@ VOID AsicSetEdcaParm(IN PRTMP_ADAPTER pAd, IN PEDCA_PARM pEdcaParm)
                Ac3Cfg.field.Cwmax = pEdcaParm->Cwmax[QID_AC_VO];
                Ac3Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_VO];
 
-//#ifdef WIFI_TEST
+/*#ifdef WIFI_TEST */
                if (pAd->CommonCfg.bWiFiTest) {
                        if (Ac3Cfg.field.AcTxop == 102) {
                                Ac0Cfg.field.AcTxop =
@@ -1753,16 +1753,16 @@ VOID AsicSetEdcaParm(IN PRTMP_ADAPTER pAd, IN PEDCA_PARM pEdcaParm)
                                    pEdcaParm->Txop[QID_AC_VI];
                        }       /* End of if */
                }
-//#endif // WIFI_TEST //
+/*#endif // WIFI_TEST // */
 
                RTMP_IO_WRITE32(pAd, EDCA_AC0_CFG, Ac0Cfg.word);
                RTMP_IO_WRITE32(pAd, EDCA_AC1_CFG, Ac1Cfg.word);
                RTMP_IO_WRITE32(pAd, EDCA_AC2_CFG, Ac2Cfg.word);
                RTMP_IO_WRITE32(pAd, EDCA_AC3_CFG, Ac3Cfg.word);
 
-               //========================================================
-               //      DMA Register has a copy too.
-               //========================================================
+               /*======================================================== */
+               /*      DMA Register has a copy too. */
+               /*======================================================== */
                csr0.field.Ac0Txop = Ac0Cfg.field.AcTxop;
                csr0.field.Ac1Txop = Ac1Cfg.field.AcTxop;
                RTMP_IO_WRITE32(pAd, WMM_TXOP0_CFG, csr0.word);
@@ -1775,7 +1775,7 @@ VOID AsicSetEdcaParm(IN PRTMP_ADAPTER pAd, IN PEDCA_PARM pEdcaParm)
                CwminCsr.field.Cwmin0 = pEdcaParm->Cwmin[QID_AC_BE];
                CwminCsr.field.Cwmin1 = pEdcaParm->Cwmin[QID_AC_BK];
                CwminCsr.field.Cwmin2 = pEdcaParm->Cwmin[QID_AC_VI];
-               CwminCsr.field.Cwmin3 = pEdcaParm->Cwmin[QID_AC_VO] - 1;        //for TGn wifi test
+               CwminCsr.field.Cwmin3 = pEdcaParm->Cwmin[QID_AC_VO] - 1;        /*for TGn wifi test */
                RTMP_IO_WRITE32(pAd, WMM_CWMIN_CFG, CwminCsr.word);
 
                CwmaxCsr.word = 0;
@@ -1786,18 +1786,18 @@ VOID AsicSetEdcaParm(IN PRTMP_ADAPTER pAd, IN PEDCA_PARM pEdcaParm)
                RTMP_IO_WRITE32(pAd, WMM_CWMAX_CFG, CwmaxCsr.word);
 
                AifsnCsr.word = 0;
-               AifsnCsr.field.Aifsn0 = Ac0Cfg.field.Aifsn;     //pEdcaParm->Aifsn[QID_AC_BE];
-               AifsnCsr.field.Aifsn1 = Ac1Cfg.field.Aifsn;     //pEdcaParm->Aifsn[QID_AC_BK];
-               AifsnCsr.field.Aifsn2 = Ac2Cfg.field.Aifsn;     //pEdcaParm->Aifsn[QID_AC_VI];
+               AifsnCsr.field.Aifsn0 = Ac0Cfg.field.Aifsn;     /*pEdcaParm->Aifsn[QID_AC_BE]; */
+               AifsnCsr.field.Aifsn1 = Ac1Cfg.field.Aifsn;     /*pEdcaParm->Aifsn[QID_AC_BK]; */
+               AifsnCsr.field.Aifsn2 = Ac2Cfg.field.Aifsn;     /*pEdcaParm->Aifsn[QID_AC_VI]; */
 
                {
-                       // Tuning for Wi-Fi WMM S06
+                       /* Tuning for Wi-Fi WMM S06 */
                        if (pAd->CommonCfg.bWiFiTest &&
                            pEdcaParm->Aifsn[QID_AC_VI] == 10)
                                AifsnCsr.field.Aifsn2 = Ac2Cfg.field.Aifsn - 4;
 
-                       // Tuning for TGn Wi-Fi 5.2.32
-                       // STA TestBed changes in this item: connexant legacy sta ==> broadcom 11n sta
+                       /* Tuning for TGn Wi-Fi 5.2.32 */
+                       /* STA TestBed changes in this item: connexant legacy sta ==> broadcom 11n sta */
                        if (STA_TGN_WIFI_ON(pAd) &&
                            pEdcaParm->Aifsn[QID_AC_VI] == 10) {
                                AifsnCsr.field.Aifsn0 = 3;
@@ -1811,14 +1811,14 @@ VOID AsicSetEdcaParm(IN PRTMP_ADAPTER pAd, IN PEDCA_PARM pEdcaParm)
                }
 
                {
-                       AifsnCsr.field.Aifsn3 = Ac3Cfg.field.Aifsn - 1; //pEdcaParm->Aifsn[QID_AC_VO]; //for TGn wifi test
+                       AifsnCsr.field.Aifsn3 = Ac3Cfg.field.Aifsn - 1; /*pEdcaParm->Aifsn[QID_AC_VO]; //for TGn wifi test */
 #ifdef RT30xx
-                       // TODO: Shiang, this modification also suitable for RT3052/RT3050 ???
+                       /* TODO: Shiang, this modification also suitable for RT3052/RT3050 ??? */
                        if (pAd->RfIcType == RFIC_3020
                            || pAd->RfIcType == RFIC_2020) {
-                               AifsnCsr.field.Aifsn2 = 0x2;    //pEdcaParm->Aifsn[QID_AC_VI]; //for WiFi WMM S4-T04.
+                               AifsnCsr.field.Aifsn2 = 0x2;    /*pEdcaParm->Aifsn[QID_AC_VI]; //for WiFi WMM S4-T04. */
                        }
-#endif // RT30xx //
+#endif /* RT30xx // */
                }
                RTMP_IO_WRITE32(pAd, WMM_AIFSN_CFG, AifsnCsr.word);
 
@@ -1885,26 +1885,26 @@ VOID AsicSetSlotTime(IN PRTMP_ADAPTER pAd, IN BOOLEAN bUseShortSlotTime)
        SlotTime = (bUseShortSlotTime) ? 9 : 20;
 
        {
-               // force using short SLOT time for FAE to demo performance when TxBurst is ON
+               /* force using short SLOT time for FAE to demo performance when TxBurst is ON */
                if (((pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE)
                     && (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED)))
                    || ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE)
                        && (pAd->CommonCfg.BACapability.field.Policy ==
                            BA_NOTUSE))
                    ) {
-                       // In this case, we will think it is doing Wi-Fi test
-                       // And we will not set to short slot when bEnableTxBurst is TRUE.
+                       /* In this case, we will think it is doing Wi-Fi test */
+                       /* And we will not set to short slot when bEnableTxBurst is TRUE. */
                } else if (pAd->CommonCfg.bEnableTxBurst) {
                        OPSTATUS_SET_FLAG(pAd, fOP_STATUS_SHORT_SLOT_INUSED);
                        SlotTime = 9;
                }
        }
 
-       //
-       // For some reasons, always set it to short slot time.
-       //
-       // ToDo: Should consider capability with 11B
-       //
+       /* */
+       /* For some reasons, always set it to short slot time. */
+       /* */
+       /* ToDo: Should consider capability with 11B */
+       /* */
        {
                if (pAd->StaCfg.BssType == BSS_ADHOC) {
                        OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_SLOT_INUSED);
@@ -1936,16 +1936,16 @@ VOID AsicAddSharedKeyEntry(IN PRTMP_ADAPTER pAd,
                           IN UCHAR CipherAlg,
                           IN PUCHAR pKey, IN PUCHAR pTxMic, IN PUCHAR pRxMic)
 {
-       ULONG offset;           //, csr0;
+       ULONG offset;           /*, csr0; */
        SHAREDKEY_MODE_STRUC csr1;
 #ifdef RTMP_MAC_PCI
        INT i;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
        DBGPRINT(RT_DEBUG_TRACE,
                 ("AsicAddSharedKeyEntry BssIndex=%d, KeyIdx=%d\n", BssIndex,
                  KeyIdx));
-//============================================================================================
+/*============================================================================================ */
 
        DBGPRINT(RT_DEBUG_TRACE,
                 ("AsicAddSharedKeyEntry: %s key #%d\n", CipherName[CipherAlg],
@@ -1968,10 +1968,10 @@ VOID AsicAddSharedKeyEntry(IN PRTMP_ADAPTER pAd,
                              pTxMic[0], pTxMic[1], pTxMic[2], pTxMic[3],
                              pTxMic[4], pTxMic[5], pTxMic[6], pTxMic[7]));
        }
-//============================================================================================
-       //
-       // fill key material - key + TX MIC + RX MIC
-       //
+/*============================================================================================ */
+       /* */
+       /* fill key material - key + TX MIC + RX MIC */
+       /* */
 #ifdef RTMP_MAC_PCI
        offset =
            SHARED_KEY_TABLE_BASE + (4 * BssIndex + KeyIdx) * HW_KEY_ENTRY_SIZE;
@@ -1992,7 +1992,7 @@ VOID AsicAddSharedKeyEntry(IN PRTMP_ADAPTER pAd,
                        RTMP_IO_WRITE8(pAd, offset + i, pRxMic[i]);
                }
        }
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 #ifdef RTMP_MAC_USB
        {
                offset =
@@ -2010,11 +2010,11 @@ VOID AsicAddSharedKeyEntry(IN PRTMP_ADAPTER pAd,
                        RTUSBMultiWrite(pAd, offset, pRxMic, 8);
                }
        }
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
-       //
-       // Update cipher algorithm. WSTA always use BSS0
-       //
+       /* */
+       /* Update cipher algorithm. WSTA always use BSS0 */
+       /* */
        RTMP_IO_READ32(pAd, SHARED_KEY_MODE_BASE + 4 * (BssIndex / 2),
                       &csr1.word);
        DBGPRINT(RT_DEBUG_TRACE,
@@ -2047,11 +2047,11 @@ VOID AsicAddSharedKeyEntry(IN PRTMP_ADAPTER pAd,
 
 }
 
-//      IRQL = DISPATCH_LEVEL
+/*      IRQL = DISPATCH_LEVEL */
 VOID AsicRemoveSharedKeyEntry(IN PRTMP_ADAPTER pAd,
                              IN UCHAR BssIndex, IN UCHAR KeyIdx)
 {
-       //ULONG SecCsr0;
+       /*ULONG SecCsr0; */
        SHAREDKEY_MODE_STRUC csr1;
 
        DBGPRINT(RT_DEBUG_TRACE,
@@ -2096,10 +2096,10 @@ VOID AsicUpdateWCIDAttribute(IN PRTMP_ADAPTER pAd,
 {
        ULONG WCIDAttri = 0, offset;
 
-       //
-       // Update WCID attribute.
-       // Only TxKey could update WCID attribute.
-       //
+       /* */
+       /* Update WCID attribute. */
+       /* Only TxKey could update WCID attribute. */
+       /* */
        offset = MAC_WCID_ATTRIBUTE_BASE + (WCID * HW_WCID_ATTRI_SIZE);
        WCIDAttri =
            (BssIndex << 4) | (CipherAlg << 1) | (bUsePairewiseKeyTable);
@@ -2171,10 +2171,10 @@ VOID AsicAddKeyEntry(IN PRTMP_ADAPTER pAd,
                     IN BOOLEAN bUsePairewiseKeyTable, IN BOOLEAN bTxKey)
 {
        ULONG offset;
-//      ULONG   WCIDAttri = 0;
+/*      ULONG   WCIDAttri = 0; */
        UCHAR IV4 = 0;
        PUCHAR pKey = pCipherKey->Key;
-//      ULONG           KeyLen = pCipherKey->KeyLen;
+/*      ULONG           KeyLen = pCipherKey->KeyLen; */
        PUCHAR pTxMic = pCipherKey->TxMic;
        PUCHAR pRxMic = pCipherKey->RxMic;
        PUCHAR pTxtsc = pCipherKey->TxTsc;
@@ -2182,14 +2182,14 @@ VOID AsicAddKeyEntry(IN PRTMP_ADAPTER pAd,
        SHAREDKEY_MODE_STRUC csr1;
 #ifdef RTMP_MAC_PCI
        UCHAR i;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
-//      ASSERT(KeyLen <= MAX_LEN_OF_PEER_KEY);
+/*      ASSERT(KeyLen <= MAX_LEN_OF_PEER_KEY); */
 
        DBGPRINT(RT_DEBUG_TRACE, ("==> AsicAddKeyEntry\n"));
-       //
-       // 1.) decide key table offset
-       //
+       /* */
+       /* 1.) decide key table offset */
+       /* */
        if (bUsePairewiseKeyTable)
                offset = PAIRWISE_KEY_TABLE_BASE + (WCID * HW_KEY_ENTRY_SIZE);
        else
@@ -2197,19 +2197,19 @@ VOID AsicAddKeyEntry(IN PRTMP_ADAPTER pAd,
                    SHARED_KEY_TABLE_BASE + (4 * BssIndex +
                                             KeyIdx) * HW_KEY_ENTRY_SIZE;
 
-       //
-       // 2.) Set Key to Asic
-       //
-       //for (i = 0; i < KeyLen; i++)
+       /* */
+       /* 2.) Set Key to Asic */
+       /* */
+       /*for (i = 0; i < KeyLen; i++) */
 #ifdef RTMP_MAC_PCI
        for (i = 0; i < MAX_LEN_OF_PEER_KEY; i++) {
                RTMP_IO_WRITE8(pAd, offset + i, pKey[i]);
        }
        offset += MAX_LEN_OF_PEER_KEY;
 
-       //
-       // 3.) Set MIC key if available
-       //
+       /* */
+       /* 3.) Set MIC key if available */
+       /* */
        if (pTxMic) {
                for (i = 0; i < 8; i++) {
                        RTMP_IO_WRITE8(pAd, offset + i, pTxMic[i]);
@@ -2222,14 +2222,14 @@ VOID AsicAddKeyEntry(IN PRTMP_ADAPTER pAd,
                        RTMP_IO_WRITE8(pAd, offset + i, pRxMic[i]);
                }
        }
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 #ifdef RTMP_MAC_USB
        RTUSBMultiWrite(pAd, offset, pKey, MAX_LEN_OF_PEER_KEY);
        offset += MAX_LEN_OF_PEER_KEY;
 
-       //
-       // 3.) Set MIC key if available
-       //
+       /* */
+       /* 3.) Set MIC key if available */
+       /* */
        if (pTxMic) {
                RTUSBMultiWrite(pAd, offset, pTxMic, 8);
        }
@@ -2238,18 +2238,18 @@ VOID AsicAddKeyEntry(IN PRTMP_ADAPTER pAd,
        if (pRxMic) {
                RTUSBMultiWrite(pAd, offset, pRxMic, 8);
        }
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
-       //
-       // 4.) Modify IV/EIV if needs
-       //     This will force Asic to use this key ID by setting IV.
-       //
+       /* */
+       /* 4.) Modify IV/EIV if needs */
+       /*     This will force Asic to use this key ID by setting IV. */
+       /* */
        if (bTxKey) {
 #ifdef RTMP_MAC_PCI
                offset = MAC_IVEIV_TABLE_BASE + (WCID * HW_IVEIV_ENTRY_SIZE);
-               //
-               // Write IV
-               //
+               /* */
+               /* Write IV */
+               /* */
                RTMP_IO_WRITE8(pAd, offset, pTxtsc[1]);
                RTMP_IO_WRITE8(pAd, offset + 1, ((pTxtsc[1] | 0x20) & 0x7f));
                RTMP_IO_WRITE8(pAd, offset + 2, pTxtsc[0]);
@@ -2258,50 +2258,50 @@ VOID AsicAddKeyEntry(IN PRTMP_ADAPTER pAd,
                if ((CipherAlg == CIPHER_TKIP)
                    || (CipherAlg == CIPHER_TKIP_NO_MIC)
                    || (CipherAlg == CIPHER_AES))
-                       IV4 |= 0x20;    // turn on extension bit means EIV existence
+                       IV4 |= 0x20;    /* turn on extension bit means EIV existence */
 
                RTMP_IO_WRITE8(pAd, offset + 3, IV4);
 
-               //
-               // Write EIV
-               //
+               /* */
+               /* Write EIV */
+               /* */
                offset += 4;
                for (i = 0; i < 4; i++) {
                        RTMP_IO_WRITE8(pAd, offset + i, pTxtsc[i + 2]);
                }
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 #ifdef RTMP_MAC_USB
                UINT32 tmpVal;
 
-               //
-               // Write IV
-               //
+               /* */
+               /* Write IV */
+               /* */
                IV4 = (KeyIdx << 6);
                if ((CipherAlg == CIPHER_TKIP)
                    || (CipherAlg == CIPHER_TKIP_NO_MIC)
                    || (CipherAlg == CIPHER_AES))
-                       IV4 |= 0x20;    // turn on extension bit means EIV existence
+                       IV4 |= 0x20;    /* turn on extension bit means EIV existence */
 
                tmpVal =
                    pTxtsc[1] + (((pTxtsc[1] | 0x20) & 0x7f) << 8) +
                    (pTxtsc[0] << 16) + (IV4 << 24);
                RTMP_IO_WRITE32(pAd, offset, tmpVal);
 
-               //
-               // Write EIV
-               //
+               /* */
+               /* Write EIV */
+               /* */
                offset += 4;
                RTMP_IO_WRITE32(pAd, offset, *(PUINT32) & pCipherKey->TxTsc[2]);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
                AsicUpdateWCIDAttribute(pAd, WCID, BssIndex, CipherAlg,
                                        bUsePairewiseKeyTable);
        }
 
        if (!bUsePairewiseKeyTable) {
-               //
-               // Only update the shared key security mode
-               //
+               /* */
+               /* Only update the shared key security mode */
+               /* */
                RTMP_IO_READ32(pAd, SHARED_KEY_MODE_BASE + 4 * (BssIndex / 2),
                               &csr1.word);
                if ((BssIndex % 2) == 0) {
@@ -2350,18 +2350,18 @@ VOID AsicAddPairwiseKeyEntry(IN PRTMP_ADAPTER pAd,
        PUCHAR pRxMic = pCipherKey->RxMic;
 #ifdef DBG
        UCHAR CipherAlg = pCipherKey->CipherAlg;
-#endif // DBG //
+#endif /* DBG // */
 
-       // EKEY
+       /* EKEY */
        offset = PAIRWISE_KEY_TABLE_BASE + (WCID * HW_KEY_ENTRY_SIZE);
 #ifdef RTMP_MAC_PCI
        for (i = 0; i < MAX_LEN_OF_PEER_KEY; i++) {
                RTMP_IO_WRITE8(pAd, offset + i, pKey[i]);
        }
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 #ifdef RTMP_MAC_USB
        RTUSBMultiWrite(pAd, offset, &pCipherKey->Key[0], MAX_LEN_OF_PEER_KEY);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
        for (i = 0; i < MAX_LEN_OF_PEER_KEY; i += 4) {
                UINT32 Value;
                RTMP_IO_READ32(pAd, offset + i, &Value);
@@ -2369,16 +2369,16 @@ VOID AsicAddPairwiseKeyEntry(IN PRTMP_ADAPTER pAd,
 
        offset += MAX_LEN_OF_PEER_KEY;
 
-       //  MIC KEY
+       /*  MIC KEY */
        if (pTxMic) {
 #ifdef RTMP_MAC_PCI
                for (i = 0; i < 8; i++) {
                        RTMP_IO_WRITE8(pAd, offset + i, pTxMic[i]);
                }
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 #ifdef RTMP_MAC_USB
                RTUSBMultiWrite(pAd, offset, &pCipherKey->TxMic[0], 8);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
        }
        offset += 8;
        if (pRxMic) {
@@ -2386,10 +2386,10 @@ VOID AsicAddPairwiseKeyEntry(IN PRTMP_ADAPTER pAd,
                for (i = 0; i < 8; i++) {
                        RTMP_IO_WRITE8(pAd, offset + i, pRxMic[i]);
                }
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 #ifdef RTMP_MAC_USB
                RTUSBMultiWrite(pAd, offset, &pCipherKey->RxMic[0], 8);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
        }
 
        DBGPRINT(RT_DEBUG_TRACE,
@@ -2428,7 +2428,7 @@ VOID AsicRemovePairwiseKeyEntry(IN PRTMP_ADAPTER pAd,
        ULONG WCIDAttri;
        USHORT offset;
 
-       // re-set the entry's WCID attribute as OPEN-NONE.
+       /* re-set the entry's WCID attribute as OPEN-NONE. */
        offset = MAC_WCID_ATTRIBUTE_BASE + (Wcid * HW_WCID_ATTRI_SIZE);
        WCIDAttri = (BssIdx << 4) | PAIRWISEKEYTABLE;
        RTMP_IO_WRITE32(pAd, offset, WCIDAttri);
@@ -2450,7 +2450,7 @@ VOID AsicSetRxAnt(IN PRTMP_ADAPTER pAd, IN UCHAR Ant)
 #ifdef RT30xx
        /* RT3572 ATE need not to do this. */
        RT30xxSetRxAnt(pAd, Ant);
-#endif // RT30xx //
+#endif /* RT30xx // */
 }
 
 VOID AsicTurnOffRFClk(IN PRTMP_ADAPTER pAd, IN UCHAR Channel)
@@ -2458,7 +2458,7 @@ VOID AsicTurnOffRFClk(IN PRTMP_ADAPTER pAd, IN UCHAR Channel)
        if (pAd->chipOps.AsicRfTurnOff) {
                pAd->chipOps.AsicRfTurnOff(pAd);
        } else {
-               // RF R2 bit 18 = 0
+               /* RF R2 bit 18 = 0 */
                UINT32 R1 = 0, R2 = 0, R3 = 0;
                UCHAR index;
                RTMP_RF_REGS *RFRegTable;
@@ -2480,9 +2480,9 @@ VOID AsicTurnOffRFClk(IN PRTMP_ADAPTER pAd, IN UCHAR Channel)
                                        RTMP_RF_IO_WRITE32(pAd, R1);
                                        RTMP_RF_IO_WRITE32(pAd, R2);
 
-                                       // Program R1b13 to 1, R3/b18,19 to 0, R2b18 to 0.
-                                       // Set RF R2 bit18=0, R3 bit[18:19]=0
-                                       //if (pAd->StaCfg.bRadio == FALSE)
+                                       /* Program R1b13 to 1, R3/b18,19 to 0, R2b18 to 0. */
+                                       /* Set RF R2 bit18=0, R3 bit[18:19]=0 */
+                                       /*if (pAd->StaCfg.bRadio == FALSE) */
                                        if (1) {
                                                RTMP_RF_IO_WRITE32(pAd, R3);
 
@@ -2509,17 +2509,17 @@ VOID AsicTurnOffRFClk(IN PRTMP_ADAPTER pAd, IN UCHAR Channel)
 
 VOID AsicTurnOnRFClk(IN PRTMP_ADAPTER pAd, IN UCHAR Channel)
 {
-       // RF R2 bit 18 = 0
+       /* RF R2 bit 18 = 0 */
        UINT32 R1 = 0, R2 = 0, R3 = 0;
        UCHAR index;
        RTMP_RF_REGS *RFRegTable;
 
 #ifdef PCIE_PS_SUPPORT
-       // The RF programming sequence is difference between 3xxx and 2xxx
+       /* The RF programming sequence is difference between 3xxx and 2xxx */
        if ((IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd))) {
                return;
        }
-#endif // PCIE_PS_SUPPORT //
+#endif /* PCIE_PS_SUPPORT // */
 
        RFRegTable = RF2850RegTable;
 
@@ -2541,13 +2541,13 @@ VOID AsicTurnOnRFClk(IN PRTMP_ADAPTER pAd, IN UCHAR Channel)
 
                                R2 = RFRegTable[index].R2;
                                if (pAd->Antenna.field.TxPath == 1) {
-                                       R2 |= 0x4000;   // If TXpath is 1, bit 14 = 1;
+                                       R2 |= 0x4000;   /* If TXpath is 1, bit 14 = 1; */
                                }
 
                                if (pAd->Antenna.field.RxPath == 2) {
-                                       R2 |= 0x40;     // write 1 to off Rxpath.
+                                       R2 |= 0x40;     /* write 1 to off Rxpath. */
                                } else if (pAd->Antenna.field.RxPath == 1) {
-                                       R2 |= 0x20040;  // write 1 to off RxPath
+                                       R2 |= 0x20040;  /* write 1 to off RxPath */
                                }
                                RTMP_RF_IO_WRITE32(pAd, R2);
 
index 9f33717..7dbcb23 100644 (file)
@@ -95,8 +95,8 @@ INT RT_CfgSetCountryRegion(IN PRTMP_ADAPTER pAd, IN PSTRING arg, IN INT band)
                regionMax = REGION_MAXIMUM_A_BAND;
        }
 
-       // TODO: Is it neccesay for following check???
-       // Country can be set only when EEPROM not programmed
+       /* TODO: Is it neccesay for following check??? */
+       /* Country can be set only when EEPROM not programmed */
        if (*pCountryRegion & 0x80) {
                DBGPRINT(RT_DEBUG_ERROR,
                         ("CfgSetCountryRegion():CountryRegion in eeprom was programmed\n"));
@@ -154,7 +154,7 @@ INT RT_CfgSetShortSlot(IN PRTMP_ADAPTER pAd, IN PSTRING arg)
        else if (ShortSlot == 0)
                pAd->CommonCfg.bUseShortSlotTime = FALSE;
        else
-               return FALSE;   //Invalid argument
+               return FALSE;   /*Invalid argument */
 
        return TRUE;
 }
@@ -176,29 +176,29 @@ INT RT_CfgSetWepKey(IN PRTMP_ADAPTER pAd,
        UCHAR CipherAlg = CIPHER_NONE;
        BOOLEAN bKeyIsHex = FALSE;
 
-       // TODO: Shall we do memset for the original key info??
+       /* TODO: Shall we do memset for the original key info?? */
        memset(pSharedKey, 0, sizeof(CIPHER_KEY));
        KeyLen = strlen(keyString);
        switch (KeyLen) {
-       case 5:         //wep 40 Ascii type
-       case 13:                //wep 104 Ascii type
+       case 5:         /*wep 40 Ascii type */
+       case 13:                /*wep 104 Ascii type */
                bKeyIsHex = FALSE;
                pSharedKey->KeyLen = KeyLen;
                NdisMoveMemory(pSharedKey->Key, keyString, KeyLen);
                break;
 
-       case 10:                //wep 40 Hex type
-       case 26:                //wep 104 Hex type
+       case 10:                /*wep 40 Hex type */
+       case 26:                /*wep 104 Hex type */
                for (i = 0; i < KeyLen; i++) {
                        if (!isxdigit(*(keyString + i)))
-                               return FALSE;   //Not Hex value;
+                               return FALSE;   /*Not Hex value; */
                }
                bKeyIsHex = TRUE;
                pSharedKey->KeyLen = KeyLen / 2;
                AtoH(keyString, pSharedKey->Key, pSharedKey->KeyLen);
                break;
 
-       default:                //Invalid argument
+       default:                /*Invalid argument */
                DBGPRINT(RT_DEBUG_TRACE,
                         ("RT_CfgSetWepKey(keyIdx=%d):Invalid argument (arg=%s)\n",
                          keyIdx, keyString));
index 033a4ea..81766db 100644 (file)
@@ -30,7 +30,7 @@
 UCHAR SNAP_802_1H[] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
 UCHAR SNAP_BRIDGE_TUNNEL[] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 };
 
-// Add Cisco Aironet SNAP heade for CCX2 support
+/* Add Cisco Aironet SNAP heade for CCX2 support */
 UCHAR SNAP_AIRONET[] = { 0xaa, 0xaa, 0x03, 0x00, 0x40, 0x96, 0x00, 0x00 };
 UCHAR CKIP_LLC_SNAP[] = { 0xaa, 0xaa, 0x03, 0x00, 0x40, 0x96, 0x00, 0x02 };
 UCHAR EAPOL_LLC_SNAP[] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00, 0x88, 0x8e };
@@ -41,28 +41,28 @@ UCHAR IPX[] = { 0x81, 0x37 };
 UCHAR APPLE_TALK[] = { 0x80, 0xf3 };
 
 UCHAR RateIdToPlcpSignal[12] = {
-       0, /* RATE_1 */ 1, /* RATE_2 */ 2, /* RATE_5_5 */ 3,    /* RATE_11 */// see BBP spec
-       11, /* RATE_6 */ 15, /* RATE_9 */ 10, /* RATE_12 */ 14, /* RATE_18 */// see IEEE802.11a-1999 p.14
+       0, /* RATE_1 */ 1, /* RATE_2 */ 2, /* RATE_5_5 */ 3,    /* RATE_11 *//* see BBP spec */
+       11, /* RATE_6 */ 15, /* RATE_9 */ 10, /* RATE_12 */ 14, /* RATE_18 *//* see IEEE802.11a-1999 p.14 */
        9, /* RATE_24 */ 13, /* RATE_36 */ 8, /* RATE_48 */ 12 /* RATE_54 */
-};                             // see IEEE802.11a-1999 p.14
+};                             /* see IEEE802.11a-1999 p.14 */
 
 UCHAR OfdmSignalToRateId[16] = {
-       RATE_54, RATE_54, RATE_54, RATE_54,     // OFDM PLCP Signal = 0,  1,  2,  3 respectively
-       RATE_54, RATE_54, RATE_54, RATE_54,     // OFDM PLCP Signal = 4,  5,  6,  7 respectively
-       RATE_48, RATE_24, RATE_12, RATE_6,      // OFDM PLCP Signal = 8,  9,  10, 11 respectively
-       RATE_54, RATE_36, RATE_18, RATE_9,      // OFDM PLCP Signal = 12, 13, 14, 15 respectively
+       RATE_54, RATE_54, RATE_54, RATE_54,     /* OFDM PLCP Signal = 0,  1,  2,  3 respectively */
+       RATE_54, RATE_54, RATE_54, RATE_54,     /* OFDM PLCP Signal = 4,  5,  6,  7 respectively */
+       RATE_48, RATE_24, RATE_12, RATE_6,      /* OFDM PLCP Signal = 8,  9,  10, 11 respectively */
+       RATE_54, RATE_36, RATE_18, RATE_9,      /* OFDM PLCP Signal = 12, 13, 14, 15 respectively */
 };
 
 UCHAR OfdmRateToRxwiMCS[12] = {
        0, 0, 0, 0,
-       0, 1, 2, 3,             // OFDM rate 6,9,12,18 = rxwi mcs 0,1,2,3
-       4, 5, 6, 7,             // OFDM rate 24,36,48,54 = rxwi mcs 4,5,6,7
+       0, 1, 2, 3,             /* OFDM rate 6,9,12,18 = rxwi mcs 0,1,2,3 */
+       4, 5, 6, 7,             /* OFDM rate 24,36,48,54 = rxwi mcs 4,5,6,7 */
 };
 
 UCHAR RxwiMCSToOfdmRate[12] = {
        RATE_6, RATE_9, RATE_12, RATE_18,
-       RATE_24, RATE_36, RATE_48, RATE_54,     // OFDM rate 6,9,12,18 = rxwi mcs 0,1,2,3
-       4, 5, 6, 7,             // OFDM rate 24,36,48,54 = rxwi mcs 4,5,6,7
+       RATE_24, RATE_36, RATE_48, RATE_54,     /* OFDM rate 6,9,12,18 = rxwi mcs 0,1,2,3 */
+       4, 5, 6, 7,             /* OFDM rate 24,36,48,54 = rxwi mcs 4,5,6,7 */
 };
 
 char *MCSToMbps[] =
@@ -73,7 +73,7 @@ char *MCSToMbps[] =
 
 UCHAR default_cwmin[] =
     { CW_MIN_IN_BITS, CW_MIN_IN_BITS, CW_MIN_IN_BITS - 1, CW_MIN_IN_BITS - 2 };
-//UCHAR default_cwmax[]={CW_MAX_IN_BITS, CW_MAX_IN_BITS, CW_MIN_IN_BITS, CW_MIN_IN_BITS-1};
+/*UCHAR default_cwmax[]={CW_MAX_IN_BITS, CW_MAX_IN_BITS, CW_MIN_IN_BITS, CW_MIN_IN_BITS-1}; */
 UCHAR default_sta_aifsn[] = { 3, 7, 2, 2 };
 
 UCHAR MapUserPriorityToAccessCategory[8] =
@@ -110,11 +110,11 @@ NDIS_STATUS MiniportMMRequest(IN PRTMP_ADAPTER pAd,
        PNDIS_PACKET pPacket;
        NDIS_STATUS Status = NDIS_STATUS_SUCCESS;
        ULONG FreeNum;
-       UCHAR rtmpHwHdr[TXINFO_SIZE + TXWI_SIZE];       //RTMP_HW_HDR_LEN];
+       UCHAR rtmpHwHdr[TXINFO_SIZE + TXWI_SIZE];       /*RTMP_HW_HDR_LEN]; */
 #ifdef RTMP_MAC_PCI
        unsigned long IrqFlags = 0;
        UCHAR IrqState;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
        BOOLEAN bUseDataQ = FALSE;
        int retryCnt = 0;
 
@@ -125,7 +125,7 @@ NDIS_STATUS MiniportMMRequest(IN PRTMP_ADAPTER pAd,
                QueIdx &= (~MGMT_USE_QUEUE_FLAG);
        }
 #ifdef RTMP_MAC_PCI
-       // 2860C use Tx Ring
+       /* 2860C use Tx Ring */
        IrqState = pAd->irq_disabled;
        if (pAd->MACVersion == 0x28600100) {
                QueIdx = (bUseDataQ == TRUE ? QueIdx : 3);
@@ -133,10 +133,10 @@ NDIS_STATUS MiniportMMRequest(IN PRTMP_ADAPTER pAd,
        }
        if (bUseDataQ && (!IrqState))
                RTMP_IRQ_LOCK(&pAd->irq_lock, IrqFlags);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
        do {
-               // Reset is in progress, stop immediately
+               /* Reset is in progress, stop immediately */
                if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS) ||
                    RTMP_TEST_FLAG(pAd,
                                   fRTMP_ADAPTER_HALT_IN_PROGRESS |
@@ -145,22 +145,22 @@ NDIS_STATUS MiniportMMRequest(IN PRTMP_ADAPTER pAd,
                        Status = NDIS_STATUS_FAILURE;
                        break;
                }
-               // Check Free priority queue
-               // Since we use PBF Queue2 for management frame.  Its corresponding DMA ring should be using TxRing.
+               /* Check Free priority queue */
+               /* Since we use PBF Queue2 for management frame.  Its corresponding DMA ring should be using TxRing. */
 #ifdef RTMP_MAC_PCI
                if (bUseDataQ) {
                        retryCnt = MAX_DATAMM_RETRY;
-                       // free Tx(QueIdx) resources
+                       /* free Tx(QueIdx) resources */
                        RTMPFreeTXDUponTxDmaDone(pAd, QueIdx);
                        FreeNum = GET_TXRING_FREENO(pAd, QueIdx);
                } else
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
                {
                        FreeNum = GET_MGMTRING_FREENO(pAd);
                }
 
                if ((FreeNum > 0)) {
-                       // We need to reserve space for rtmp hardware header. i.e., TxWI for RT2860 and TxInfo+TxWI for RT2870
+                       /* We need to reserve space for rtmp hardware header. i.e., TxWI for RT2860 and TxInfo+TxWI for RT2870 */
                        NdisZeroMemory(&rtmpHwHdr, (TXINFO_SIZE + TXWI_SIZE));
                        Status =
                            RTMPAllocateNdisPacket(pAd, &pPacket,
@@ -172,8 +172,8 @@ NDIS_STATUS MiniportMMRequest(IN PRTMP_ADAPTER pAd,
                                         ("MiniportMMRequest (error:: can't allocate NDIS PACKET)\n"));
                                break;
                        }
-                       //pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK;
-                       //pAd->CommonCfg.MlmeRate = RATE_2;
+                       /*pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK; */
+                       /*pAd->CommonCfg.MlmeRate = RATE_2; */
 
 #ifdef RTMP_MAC_PCI
                        if (bUseDataQ) {
@@ -181,7 +181,7 @@ NDIS_STATUS MiniportMMRequest(IN PRTMP_ADAPTER pAd,
                                    MlmeDataHardTransmit(pAd, QueIdx, pPacket);
                                retryCnt--;
                        } else
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
                                Status = MlmeHardTransmit(pAd, QueIdx, pPacket);
                        if (Status == NDIS_STATUS_SUCCESS)
                                retryCnt = 0;
@@ -202,7 +202,7 @@ NDIS_STATUS MiniportMMRequest(IN PRTMP_ADAPTER pAd,
                                                  MgmtRingFullCount));
                                }
                        }
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
                        DBGPRINT(RT_DEBUG_ERROR,
                                 ("Qidx(%d), not enough space in MgmtRing, MgmtRingFullCount=%ld!\n",
                                  QueIdx,
@@ -213,7 +213,7 @@ NDIS_STATUS MiniportMMRequest(IN PRTMP_ADAPTER pAd,
 #ifdef RTMP_MAC_PCI
        if (bUseDataQ && (!IrqState))
                RTMP_IRQ_UNLOCK(&pAd->irq_lock, IrqFlags);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
        return Status;
 }
@@ -265,7 +265,7 @@ NDIS_STATUS MlmeHardTransmit(IN PRTMP_ADAPTER pAd,
        if (pAd->MACVersion == 0x28600100)
                return MlmeHardTransmitTxRing(pAd, QueIdx, pPacket);
        else
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
                return MlmeHardTransmitMgmtRing(pAd, QueIdx, pPacket);
 
 }
@@ -285,22 +285,22 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(IN PRTMP_ADAPTER pAd,
 
        RTMP_QueryPacketInfo(pPacket, &PacketInfo, &pSrcBufVA, &SrcBufLen);
 
-       // Make sure MGMT ring resource won't be used by other threads
+       /* Make sure MGMT ring resource won't be used by other threads */
        RTMP_SEM_LOCK(&pAd->MgmtRingLock);
        if (pSrcBufVA == NULL) {
-               // The buffer shouldn't be NULL
+               /* The buffer shouldn't be NULL */
                RTMP_SEM_UNLOCK(&pAd->MgmtRingLock);
                return NDIS_STATUS_FAILURE;
        }
 
        {
-               // outgoing frame always wakeup PHY to prevent frame lost
+               /* outgoing frame always wakeup PHY to prevent frame lost */
                if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
                        AsicForceWakeup(pAd, TRUE);
        }
 
        pFirstTxWI = (PTXWI_STRUC) (pSrcBufVA + TXINFO_SIZE);
-       pHeader_802_11 = (PHEADER_802_11) (pSrcBufVA + TXINFO_SIZE + TXWI_SIZE);        //TXWI_SIZE);
+       pHeader_802_11 = (PHEADER_802_11) (pSrcBufVA + TXINFO_SIZE + TXWI_SIZE);        /*TXWI_SIZE); */
 
        if (pHeader_802_11->Addr1[0] & 0x01) {
                MlmeRate = pAd->CommonCfg.BasicMlmeRate;
@@ -308,8 +308,8 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(IN PRTMP_ADAPTER pAd,
                MlmeRate = pAd->CommonCfg.MlmeRate;
        }
 
-       // Verify Mlme rate for a / g bands.
-       if ((pAd->LatchRfRegs.Channel > 14) && (MlmeRate < RATE_6))     // 11A band
+       /* Verify Mlme rate for a / g bands. */
+       if ((pAd->LatchRfRegs.Channel > 14) && (MlmeRate < RATE_6))     /* 11A band */
                MlmeRate = RATE_6;
 
        if ((pHeader_802_11->FC.Type == BTYPE_DATA) &&
@@ -318,7 +318,7 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(IN PRTMP_ADAPTER pAd,
        }
 
        {
-               // Fixed W52 with Activity scan issue in ABG_MIXED and ABGN_MIXED mode.
+               /* Fixed W52 with Activity scan issue in ABG_MIXED and ABGN_MIXED mode. */
                if (pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED
                    || pAd->CommonCfg.PhyMode == PHY_11ABGN_MIXED) {
                        if (pAd->LatchRfRegs.Channel > 14)
@@ -328,17 +328,17 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(IN PRTMP_ADAPTER pAd,
                }
        }
 
-       //
-       // Should not be hard code to set PwrMgmt to 0 (PWR_ACTIVE)
-       // Snice it's been set to 0 while on MgtMacHeaderInit
-       // By the way this will cause frame to be send on PWR_SAVE failed.
-       //
-       pHeader_802_11->FC.PwrMgmt = PWR_ACTIVE;        // (pAd->StaCfg.Psm == PWR_SAVE);
-
-       //
-       // In WMM-UAPSD, mlme frame should be set psm as power saving but probe request frame
-       // Data-Null packets alse pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD
-//      if ((pHeader_802_11->FC.Type != BTYPE_DATA) && (pHeader_802_11->FC.Type != BTYPE_CNTL))
+       /* */
+       /* Should not be hard code to set PwrMgmt to 0 (PWR_ACTIVE) */
+       /* Snice it's been set to 0 while on MgtMacHeaderInit */
+       /* By the way this will cause frame to be send on PWR_SAVE failed. */
+       /* */
+       pHeader_802_11->FC.PwrMgmt = PWR_ACTIVE;        /* (pAd->StaCfg.Psm == PWR_SAVE); */
+
+       /* */
+       /* In WMM-UAPSD, mlme frame should be set psm as power saving but probe request frame */
+       /* Data-Null packets alse pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD */
+/*      if ((pHeader_802_11->FC.Type != BTYPE_DATA) && (pHeader_802_11->FC.Type != BTYPE_CNTL)) */
        {
                if ((pHeader_802_11->FC.SubType == SUBTYPE_ACTION) ||
                    ((pHeader_802_11->FC.Type == BTYPE_DATA) &&
@@ -353,20 +353,20 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(IN PRTMP_ADAPTER pAd,
        }
 
        bInsertTimestamp = FALSE;
-       if (pHeader_802_11->FC.Type == BTYPE_CNTL)      // must be PS-POLL
+       if (pHeader_802_11->FC.Type == BTYPE_CNTL)      /* must be PS-POLL */
        {
-               //Set PM bit in ps-poll, to fix WLK 1.2  PowerSaveMode_ext failure issue.
+               /*Set PM bit in ps-poll, to fix WLK 1.2  PowerSaveMode_ext failure issue. */
                if ((pAd->OpMode == OPMODE_STA)
                    && (pHeader_802_11->FC.SubType == SUBTYPE_PS_POLL)) {
                        pHeader_802_11->FC.PwrMgmt = PWR_SAVE;
                }
                bAckRequired = FALSE;
-       } else                  // BTYPE_MGMT or BTYPE_DATA(must be NULL frame)
+       } else                  /* BTYPE_MGMT or BTYPE_DATA(must be NULL frame) */
        {
-               //pAd->Sequence++;
-               //pHeader_802_11->Sequence = pAd->Sequence;
+               /*pAd->Sequence++; */
+               /*pHeader_802_11->Sequence = pAd->Sequence; */
 
-               if (pHeader_802_11->Addr1[0] & 0x01)    // MULTICAST, BROADCAST
+               if (pHeader_802_11->Addr1[0] & 0x01)    /* MULTICAST, BROADCAST */
                {
                        bAckRequired = FALSE;
                        pHeader_802_11->Duration = 0;
@@ -377,12 +377,12 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(IN PRTMP_ADAPTER pAd,
                        if ((pHeader_802_11->FC.SubType == SUBTYPE_PROBE_RSP)
                            && (pHeader_802_11->FC.Type == BTYPE_MGMT)) {
                                bInsertTimestamp = TRUE;
-                               bAckRequired = FALSE;   // Disable ACK to prevent retry 0x1f for Probe Response
+                               bAckRequired = FALSE;   /* Disable ACK to prevent retry 0x1f for Probe Response */
                        } else
                            if ((pHeader_802_11->FC.SubType ==
                                 SUBTYPE_PROBE_REQ)
                                && (pHeader_802_11->FC.Type == BTYPE_MGMT)) {
-                               bAckRequired = FALSE;   // Disable ACK to prevent retry 0x1f for Probe Request
+                               bAckRequired = FALSE;   /* Disable ACK to prevent retry 0x1f for Probe Request */
                        }
                }
        }
@@ -391,30 +391,30 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(IN PRTMP_ADAPTER pAd,
        if (pAd->Sequence > 0xfff)
                pAd->Sequence = 0;
 
-       // Before radar detection done, mgmt frame can not be sent but probe req
-       // Because we need to use probe req to trigger driver to send probe req in passive scan
+       /* Before radar detection done, mgmt frame can not be sent but probe req */
+       /* Because we need to use probe req to trigger driver to send probe req in passive scan */
        if ((pHeader_802_11->FC.SubType != SUBTYPE_PROBE_REQ)
            && (pAd->CommonCfg.bIEEE80211H == 1)
            && (pAd->CommonCfg.RadarDetect.RDMode != RD_NORMAL_MODE)) {
                DBGPRINT(RT_DEBUG_ERROR,
                         ("MlmeHardTransmit --> radar detect not in normal mode !!!\n"));
-//              if (!IrqState)
+/*              if (!IrqState) */
                RTMP_SEM_UNLOCK(&pAd->MgmtRingLock);
                return (NDIS_STATUS_FAILURE);
        }
 
-       //
-       // fill scatter-and-gather buffer list into TXD. Internally created NDIS PACKET
-       // should always has only one physical buffer, and the whole frame size equals
-       // to the first scatter buffer size
-       //
+       /* */
+       /* fill scatter-and-gather buffer list into TXD. Internally created NDIS PACKET */
+       /* should always has only one physical buffer, and the whole frame size equals */
+       /* to the first scatter buffer size */
+       /* */
 
-       // Initialize TX Descriptor
-       // For inter-frame gap, the number is for this frame and next frame
-       // For MLME rate, we will fix as 2Mb to match other vendor's implement
-//      pAd->CommonCfg.MlmeTransmit.field.MODE = 1;
+       /* Initialize TX Descriptor */
+       /* For inter-frame gap, the number is for this frame and next frame */
+       /* For MLME rate, we will fix as 2Mb to match other vendor's implement */
+/*      pAd->CommonCfg.MlmeTransmit.field.MODE = 1; */
 
-// management frame doesn't need encryption. so use RESERVED_WCID no matter u are sending to specific wcid or not.
+/* management frame doesn't need encryption. so use RESERVED_WCID no matter u are sending to specific wcid or not. */
        PID = PID_MGMT;
 
        if (pMacEntry == NULL) {
@@ -434,11 +434,11 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(IN PRTMP_ADAPTER pAd,
                              IFS_BACKOFF, FALSE, &pMacEntry->MaxHTPhyMode);
        }
 
-       // Now do hardware-depened kick out.
+       /* Now do hardware-depened kick out. */
        HAL_KickOutMgmtTx(pAd, QueIdx, pPacket, pSrcBufVA, SrcBufLen);
 
-       // Make sure to release MGMT ring resource
-//      if (!IrqState)
+       /* Make sure to release MGMT ring resource */
+/*      if (!IrqState) */
        RTMP_SEM_UNLOCK(&pAd->MgmtRingLock);
        return NDIS_STATUS_SUCCESS;
 }
@@ -514,17 +514,17 @@ static UCHAR TxPktClassification(IN RTMP_ADAPTER * pAd, IN PNDIS_PACKET pPacket)
        BOOLEAN bHTRate = FALSE;
 
        Wcid = RTMP_GET_PACKET_WCID(pPacket);
-       if (Wcid == MCAST_WCID) {       // Handle for RA is Broadcast/Multicast Address.
+       if (Wcid == MCAST_WCID) {       /* Handle for RA is Broadcast/Multicast Address. */
                return TX_MCAST_FRAME;
        }
-       // Handle for unicast packets
+       /* Handle for unicast packets */
        pMacEntry = &pAd->MacTab.Content[Wcid];
-       if (RTMP_GET_PACKET_LOWRATE(pPacket)) { // It's a specific packet need to force low rate, i.e., bDHCPFrame, bEAPOLFrame, bWAIFrame
+       if (RTMP_GET_PACKET_LOWRATE(pPacket)) { /* It's a specific packet need to force low rate, i.e., bDHCPFrame, bEAPOLFrame, bWAIFrame */
                TxFrameType = TX_LEGACY_FRAME;
-       } else if (IS_HT_RATE(pMacEntry)) {     // it's a 11n capable packet
+       } else if (IS_HT_RATE(pMacEntry)) {     /* it's a 11n capable packet */
 
-               // Depends on HTPhyMode to check if the peer support the HTRate transmission.
-               //      Currently didn't support A-MSDU embedded in A-MPDU
+               /* Depends on HTPhyMode to check if the peer support the HTRate transmission. */
+               /*      Currently didn't support A-MSDU embedded in A-MPDU */
                bHTRate = TRUE;
                if (RTMP_GET_PACKET_MOREDATA(pPacket)
                    || (pMacEntry->PsMode == PWR_SAVE))
@@ -538,15 +538,15 @@ static UCHAR TxPktClassification(IN RTMP_ADAPTER * pAd, IN PNDIS_PACKET pPacket)
                        return TX_AMSDU_FRAME;
                else
                        TxFrameType = TX_LEGACY_FRAME;
-       } else {                // it's a legacy b/g packet.
-               if ((CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_AGGREGATION_CAPABLE) && pAd->CommonCfg.bAggregationCapable) && (RTMP_GET_PACKET_TXRATE(pPacket) >= RATE_6) && (!(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) && CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_WMM_CAPABLE)))) {   // if peer support Ralink Aggregation, we use it.
+       } else {                /* it's a legacy b/g packet. */
+               if ((CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_AGGREGATION_CAPABLE) && pAd->CommonCfg.bAggregationCapable) && (RTMP_GET_PACKET_TXRATE(pPacket) >= RATE_6) && (!(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) && CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_WMM_CAPABLE)))) {   /* if peer support Ralink Aggregation, we use it. */
                        TxFrameType = TX_RALINK_FRAME;
                } else {
                        TxFrameType = TX_LEGACY_FRAME;
                }
        }
 
-       // Currently, our fragment only support when a unicast packet send as NOT-ARALINK, NOT-AMSDU and NOT-AMPDU.
+       /* Currently, our fragment only support when a unicast packet send as NOT-ARALINK, NOT-AMSDU and NOT-AMPDU. */
        if ((RTMP_GET_PACKET_FRAGMENTS(pPacket) > 1)
            && (TxFrameType == TX_LEGACY_FRAME))
                TxFrameType = TX_FRAG_FRAME;
@@ -567,14 +567,14 @@ BOOLEAN RTMP_FillTxBlkInfo(IN RTMP_ADAPTER * pAd, IN TX_BLK * pTxBlk)
        pTxBlk->Wcid = RTMP_GET_PACKET_WCID(pPacket);
        pTxBlk->apidx = RTMP_GET_PACKET_IF(pPacket);
        pTxBlk->UserPriority = RTMP_GET_PACKET_UP(pPacket);
-       pTxBlk->FrameGap = IFS_HTTXOP;  // ASIC determine Frame Gap
+       pTxBlk->FrameGap = IFS_HTTXOP;  /* ASIC determine Frame Gap */
 
        if (RTMP_GET_PACKET_CLEAR_EAP_FRAME(pTxBlk->pPacket))
                TX_BLK_SET_FLAG(pTxBlk, fTX_bClearEAPFrame);
        else
                TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bClearEAPFrame);
 
-       // Default to clear this flag
+       /* Default to clear this flag */
        TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bForceNonQoS);
 
        if (pTxBlk->Wcid == MCAST_WCID) {
@@ -584,8 +584,8 @@ BOOLEAN RTMP_FillTxBlkInfo(IN RTMP_ADAPTER * pAd, IN TX_BLK * pTxBlk)
                            &pAd->MacTab.Content[MCAST_WCID].HTPhyMode;
                }
 
-               TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bAckRequired);    // AckRequired = FALSE, when broadcast packet in Adhoc mode.
-               //TX_BLK_SET_FLAG(pTxBlk, fTX_bForceLowRate);
+               TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bAckRequired);    /* AckRequired = FALSE, when broadcast packet in Adhoc mode. */
+               /*TX_BLK_SET_FLAG(pTxBlk, fTX_bForceLowRate); */
                TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bAllowFrag);
                TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bWMM);
                if (RTMP_GET_PACKET_MOREDATA(pPacket)) {
@@ -598,7 +598,7 @@ BOOLEAN RTMP_FillTxBlkInfo(IN RTMP_ADAPTER * pAd, IN TX_BLK * pTxBlk)
 
                pMacEntry = pTxBlk->pMacEntry;
 
-               // For all unicast packets, need Ack unless the Ack Policy is not set as NORMAL_ACK.
+               /* For all unicast packets, need Ack unless the Ack Policy is not set as NORMAL_ACK. */
                if (pAd->CommonCfg.AckPolicy[pTxBlk->QueIdx] != NORMAL_ACK)
                        TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bAckRequired);
                else
@@ -614,24 +614,24 @@ BOOLEAN RTMP_FillTxBlkInfo(IN RTMP_ADAPTER * pAd, IN TX_BLK * pTxBlk)
                {
                        {
 
-                               // If support WMM, enable it.
+                               /* If support WMM, enable it. */
                                if (OPSTATUS_TEST_FLAG
                                    (pAd, fOP_STATUS_WMM_INUSED)
                                    && CLIENT_STATUS_TEST_FLAG(pMacEntry,
                                                               fCLIENT_STATUS_WMM_CAPABLE))
                                        TX_BLK_SET_FLAG(pTxBlk, fTX_bWMM);
 
-//                              if (pAd->StaCfg.bAutoTxRateSwitch)
-//                                      TX_BLK_SET_FLAG(pTxBlk, fTX_AutoRateSwitch);
+/*                              if (pAd->StaCfg.bAutoTxRateSwitch) */
+/*                                      TX_BLK_SET_FLAG(pTxBlk, fTX_AutoRateSwitch); */
                        }
                }
 
                if (pTxBlk->TxFrameType == TX_LEGACY_FRAME) {
-                       if ((RTMP_GET_PACKET_LOWRATE(pPacket)) || ((pAd->OpMode == OPMODE_AP) && (pMacEntry->MaxHTPhyMode.field.MODE == MODE_CCK) && (pMacEntry->MaxHTPhyMode.field.MCS == RATE_1))) {  // Specific packet, i.e., bDHCPFrame, bEAPOLFrame, bWAIFrame, need force low rate.
+                       if ((RTMP_GET_PACKET_LOWRATE(pPacket)) || ((pAd->OpMode == OPMODE_AP) && (pMacEntry->MaxHTPhyMode.field.MODE == MODE_CCK) && (pMacEntry->MaxHTPhyMode.field.MCS == RATE_1))) {  /* Specific packet, i.e., bDHCPFrame, bEAPOLFrame, bWAIFrame, need force low rate. */
                                pTxBlk->pTransmit =
                                    &pAd->MacTab.Content[MCAST_WCID].HTPhyMode;
 
-                               // Modify the WMM bit for ICV issue. If we have a packet with EOSP field need to set as 1, how to handle it???
+                               /* Modify the WMM bit for ICV issue. If we have a packet with EOSP field need to set as 1, how to handle it??? */
                                if (IS_HT_STA(pTxBlk->pMacEntry) &&
                                    (CLIENT_STATUS_TEST_FLAG
                                     (pMacEntry, fCLIENT_STATUS_RALINK_CHIPSET))
@@ -645,7 +645,7 @@ BOOLEAN RTMP_FillTxBlkInfo(IN RTMP_ADAPTER * pAd, IN TX_BLK * pTxBlk)
                                }
                        }
 
-                       if ((IS_HT_RATE(pMacEntry) == FALSE) && (CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_PIGGYBACK_CAPABLE))) {       // Currently piggy-back only support when peer is operate in b/g mode.
+                       if ((IS_HT_RATE(pMacEntry) == FALSE) && (CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_PIGGYBACK_CAPABLE))) {       /* Currently piggy-back only support when peer is operate in b/g mode. */
                                TX_BLK_SET_FLAG(pTxBlk, fTX_bPiggyBack);
                        }
 
@@ -666,7 +666,7 @@ BOOLEAN CanDoAggregateTransmit(IN RTMP_ADAPTER * pAd,
                               IN NDIS_PACKET * pPacket, IN TX_BLK * pTxBlk)
 {
 
-       //DBGPRINT(RT_DEBUG_TRACE, ("Check if can do aggregation! TxFrameType=%d!\n", pTxBlk->TxFrameType));
+       /*DBGPRINT(RT_DEBUG_TRACE, ("Check if can do aggregation! TxFrameType=%d!\n", pTxBlk->TxFrameType)); */
 
        if (RTMP_GET_PACKET_WCID(pPacket) == MCAST_WCID)
                return FALSE;
@@ -675,15 +675,15 @@ BOOLEAN CanDoAggregateTransmit(IN RTMP_ADAPTER * pAd,
            RTMP_GET_PACKET_EAPOL(pPacket) || RTMP_GET_PACKET_WAI(pPacket))
                return FALSE;
 
-       if ((pTxBlk->TxFrameType == TX_AMSDU_FRAME) && ((pTxBlk->TotalFrameLen + GET_OS_PKT_LEN(pPacket)) > (RX_BUFFER_AGGRESIZE - 100))) {     // For AMSDU, allow the packets with total length < max-amsdu size
+       if ((pTxBlk->TxFrameType == TX_AMSDU_FRAME) && ((pTxBlk->TotalFrameLen + GET_OS_PKT_LEN(pPacket)) > (RX_BUFFER_AGGRESIZE - 100))) {     /* For AMSDU, allow the packets with total length < max-amsdu size */
                return FALSE;
        }
 
-       if ((pTxBlk->TxFrameType == TX_RALINK_FRAME) && (pTxBlk->TxPacketList.Number == 2)) {   // For RALINK-Aggregation, allow two frames in one batch.
+       if ((pTxBlk->TxFrameType == TX_RALINK_FRAME) && (pTxBlk->TxPacketList.Number == 2)) {   /* For RALINK-Aggregation, allow two frames in one batch. */
                return FALSE;
        }
 
-       if ((INFRA_ON(pAd)) && (pAd->OpMode == OPMODE_STA))     // must be unicast to AP
+       if ((INFRA_ON(pAd)) && (pAd->OpMode == OPMODE_STA))     /* must be unicast to AP */
                return TRUE;
        else
                return FALSE;
@@ -729,7 +729,7 @@ VOID RTMPDeQueuePacket(IN PRTMP_ADAPTER pAd, IN BOOLEAN bIntContext, IN UCHAR QI
 
        if (QIdx == NUM_OF_TX_RING) {
                sQIdx = 0;
-               eQIdx = 3;      // 4 ACs, start from 0.
+               eQIdx = 3;      /* 4 ACs, start from 0. */
        } else {
                sQIdx = eQIdx = QIdx;
        }
@@ -764,14 +764,14 @@ VOID RTMPDeQueuePacket(IN PRTMP_ADAPTER pAd, IN BOOLEAN bIntContext, IN UCHAR QI
                        FreeNumber[QueIdx] = GET_TXRING_FREENO(pAd, QueIdx);
 
                        if (FreeNumber[QueIdx] <= 5) {
-                               // free Tx(QueIdx) resources
+                               /* free Tx(QueIdx) resources */
                                RTMPFreeTXDUponTxDmaDone(pAd, QueIdx);
                                FreeNumber[QueIdx] =
                                    GET_TXRING_FREENO(pAd, QueIdx);
                        }
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
-                       // probe the Queue Head
+                       /* probe the Queue Head */
                        pQueue = &pAd->TxSwQueue[QueIdx];
                        if ((pEntry = pQueue->Head) == NULL) {
                                DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext,
@@ -781,12 +781,12 @@ VOID RTMPDeQueuePacket(IN PRTMP_ADAPTER pAd, IN BOOLEAN bIntContext, IN UCHAR QI
 
                        pTxBlk = &TxBlk;
                        NdisZeroMemory((PUCHAR) pTxBlk, sizeof(TX_BLK));
-                       //InitializeQueueHeader(&pTxBlk->TxPacketList);         // Didn't need it because we already memzero it.
+                       /*InitializeQueueHeader(&pTxBlk->TxPacketList);         // Didn't need it because we already memzero it. */
                        pTxBlk->QueIdx = QueIdx;
 
                        pPacket = QUEUE_ENTRY_TO_PACKET(pEntry);
 
-                       // Early check to make sure we have enoguh Tx Resource.
+                       /* Early check to make sure we have enoguh Tx Resource. */
                        hasTxDesc =
                            RTMP_HAS_ENOUGH_FREE_DESC(pAd, pTxBlk,
                                                      FreeNumber[QueIdx],
@@ -803,7 +803,7 @@ VOID RTMPDeQueuePacket(IN PRTMP_ADAPTER pAd, IN BOOLEAN bIntContext, IN UCHAR QI
                        pTxBlk->TxFrameType = TxPktClassification(pAd, pPacket);
                        pEntry = RemoveHeadQueue(pQueue);
                        pTxBlk->TotalFrameNum++;
-                       pTxBlk->TotalFragNum += RTMP_GET_PACKET_FRAGMENTS(pPacket);     // The real fragment number maybe vary
+                       pTxBlk->TotalFragNum += RTMP_GET_PACKET_FRAGMENTS(pPacket);     /* The real fragment number maybe vary */
                        pTxBlk->TotalFrameLen += GET_OS_PKT_LEN(pPacket);
                        pTxBlk->pPacket = pPacket;
                        InsertTailQueue(&pTxBlk->TxPacketList,
@@ -811,7 +811,7 @@ VOID RTMPDeQueuePacket(IN PRTMP_ADAPTER pAd, IN BOOLEAN bIntContext, IN UCHAR QI
 
                        if (pTxBlk->TxFrameType == TX_RALINK_FRAME
                            || pTxBlk->TxFrameType == TX_AMSDU_FRAME) {
-                               // Enhance SW Aggregation Mechanism
+                               /* Enhance SW Aggregation Mechanism */
                                if (NEED_QUEUE_BACK_FOR_AGG
                                    (pAd, QueIdx, FreeNumber[QueIdx],
                                     pTxBlk->TxFrameType)) {
@@ -827,7 +827,7 @@ VOID RTMPDeQueuePacket(IN PRTMP_ADAPTER pAd, IN BOOLEAN bIntContext, IN UCHAR QI
                                        if ((pEntry = pQueue->Head) == NULL)
                                                break;
 
-                                       // For TX_AMSDU_FRAME/TX_RALINK_FRAME, Need to check if next pakcet can do aggregation.
+                                       /* For TX_AMSDU_FRAME/TX_RALINK_FRAME, Need to check if next pakcet can do aggregation. */
                                        pPacket = QUEUE_ENTRY_TO_PACKET(pEntry);
                                        FreeNumber[QueIdx] =
                                            GET_TXRING_FREENO(pAd, QueIdx);
@@ -843,12 +843,12 @@ VOID RTMPDeQueuePacket(IN PRTMP_ADAPTER pAd, IN BOOLEAN bIntContext, IN UCHAR QI
                                             (pAd, pPacket, pTxBlk) == FALSE))
                                                break;
 
-                                       //Remove the packet from the TxSwQueue and insert into pTxBlk
+                                       /*Remove the packet from the TxSwQueue and insert into pTxBlk */
                                        pEntry = RemoveHeadQueue(pQueue);
                                        ASSERT(pEntry);
                                        pPacket = QUEUE_ENTRY_TO_PACKET(pEntry);
                                        pTxBlk->TotalFrameNum++;
-                                       pTxBlk->TotalFragNum += RTMP_GET_PACKET_FRAGMENTS(pPacket);     // The real fragment number maybe vary
+                                       pTxBlk->TotalFragNum += RTMP_GET_PACKET_FRAGMENTS(pPacket);     /* The real fragment number maybe vary */
                                        pTxBlk->TotalFrameLen +=
                                            GET_OS_PKT_LEN(pPacket);
                                        InsertTailQueue(&pTxBlk->TxPacketList,
@@ -861,18 +861,18 @@ VOID RTMPDeQueuePacket(IN PRTMP_ADAPTER pAd, IN BOOLEAN bIntContext, IN UCHAR QI
                        }
 #ifdef RTMP_MAC_USB
                        DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
                        Count += pTxBlk->TxPacketList.Number;
 
-                       // Do HardTransmit now.
+                       /* Do HardTransmit now. */
                        Status = STAHardTransmit(pAd, pTxBlk, QueIdx);
 
 #ifdef RTMP_MAC_PCI
                        DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags);
-                       // static rate also need NICUpdateFifoStaCounters() function.
-                       //if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED))
+                       /* static rate also need NICUpdateFifoStaCounters() function. */
+                       /*if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED)) */
                        NICUpdateFifoStaCounters(pAd);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
                }
 
@@ -881,7 +881,7 @@ VOID RTMPDeQueuePacket(IN PRTMP_ADAPTER pAd, IN BOOLEAN bIntContext, IN UCHAR QI
 #ifdef RTMP_MAC_USB
                if (!hasTxDesc)
                        RTUSBKickBulkOut(pAd);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
        }
 
 }
@@ -912,28 +912,28 @@ USHORT RTMPCalcDuration(IN PRTMP_ADAPTER pAd, IN UCHAR Rate, IN ULONG Size)
 {
        ULONG Duration = 0;
 
-       if (Rate < RATE_FIRST_OFDM_RATE)        // CCK
+       if (Rate < RATE_FIRST_OFDM_RATE)        /* CCK */
        {
                if ((Rate > RATE_1)
                    && OPSTATUS_TEST_FLAG(pAd,
                                          fOP_STATUS_SHORT_PREAMBLE_INUSED))
-                       Duration = 96;  // 72+24 preamble+plcp
+                       Duration = 96;  /* 72+24 preamble+plcp */
                else
-                       Duration = 192; // 144+48 preamble+plcp
+                       Duration = 192; /* 144+48 preamble+plcp */
 
                Duration += (USHORT) ((Size << 4) / RateIdTo500Kbps[Rate]);
                if ((Size << 4) % RateIdTo500Kbps[Rate])
                        Duration++;
-       } else if (Rate <= RATE_LAST_OFDM_RATE) // OFDM rates
+       } else if (Rate <= RATE_LAST_OFDM_RATE) /* OFDM rates */
        {
-               Duration = 20 + 6;      // 16+4 preamble+plcp + Signal Extension
+               Duration = 20 + 6;      /* 16+4 preamble+plcp + Signal Extension */
                Duration +=
                    4 * (USHORT) ((11 + Size * 4) / RateIdTo500Kbps[Rate]);
                if ((11 + Size * 4) % RateIdTo500Kbps[Rate])
                        Duration += 4;
-       } else                  //mimo rate
+       } else                  /*mimo rate */
        {
-               Duration = 20 + 6;      // 16+4 preamble+plcp + Signal Extension
+               Duration = 20 + 6;      /* 16+4 preamble+plcp + Signal Extension */
        }
 
        return (USHORT) Duration;
@@ -968,7 +968,7 @@ USHORT RTMPCalcDuration(IN PRTMP_ADAPTER pAd, IN UCHAR Rate, IN ULONG Size)
 
        ========================================================================
 */
-VOID RTMPWriteTxWI(IN PRTMP_ADAPTER pAd, IN PTXWI_STRUC pOutTxWI, IN BOOLEAN FRAG, IN BOOLEAN CFACK, IN BOOLEAN InsTimestamp, IN BOOLEAN AMPDU, IN BOOLEAN Ack, IN BOOLEAN NSeq,       // HW new a sequence.
+VOID RTMPWriteTxWI(IN PRTMP_ADAPTER pAd, IN PTXWI_STRUC pOutTxWI, IN BOOLEAN FRAG, IN BOOLEAN CFACK, IN BOOLEAN InsTimestamp, IN BOOLEAN AMPDU, IN BOOLEAN Ack, IN BOOLEAN NSeq,       /* HW new a sequence. */
                   IN UCHAR BASize,
                   IN UCHAR WCID,
                   IN ULONG Length,
@@ -985,10 +985,10 @@ VOID RTMPWriteTxWI(IN PRTMP_ADAPTER pAd, IN PTXWI_STRUC pOutTxWI, IN BOOLEAN FRA
        if (WCID < MAX_LEN_OF_MAC_TABLE)
                pMac = &pAd->MacTab.Content[WCID];
 
-       //
-       // Always use Long preamble before verifiation short preamble functionality works well.
-       // Todo: remove the following line if short preamble functionality works
-       //
+       /* */
+       /* Always use Long preamble before verifiation short preamble functionality works well. */
+       /* Todo: remove the following line if short preamble functionality works */
+       /* */
        OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);
        NdisZeroMemory(&TxWI, TXWI_SIZE);
        pTxWI = &TxWI;
@@ -1002,7 +1002,7 @@ VOID RTMPWriteTxWI(IN PRTMP_ADAPTER pAd, IN PTXWI_STRUC pOutTxWI, IN BOOLEAN FRA
        pTxWI->txop = Txopmode;
 
        pTxWI->NSEQ = NSeq;
-       // John tune the performace with Intel Client in 20 MHz performance
+       /* John tune the performace with Intel Client in 20 MHz performance */
        BASize = pAd->CommonCfg.TxBASize;
        if (pAd->MACVersion == 0x28720200) {
                if (BASize > 13)
@@ -1019,7 +1019,7 @@ VOID RTMPWriteTxWI(IN PRTMP_ADAPTER pAd, IN PTXWI_STRUC pOutTxWI, IN BOOLEAN FRA
        pTxWI->MPDUtotalByteCount = Length;
        pTxWI->PacketId = PID;
 
-       // If CCK or OFDM, BW must be 20
+       /* If CCK or OFDM, BW must be 20 */
        pTxWI->BW =
            (pTransmit->field.MODE <=
             MODE_OFDM) ? (BW_20) : (pTransmit->field.BW);
@@ -1032,10 +1032,10 @@ VOID RTMPWriteTxWI(IN PRTMP_ADAPTER pAd, IN PTXWI_STRUC pOutTxWI, IN BOOLEAN FRA
                if (pAd->CommonCfg.bMIMOPSEnable) {
                        if ((pMac->MmpsMode == MMPS_DYNAMIC)
                            && (pTransmit->field.MCS > 7)) {
-                               // Dynamic MIMO Power Save Mode
+                               /* Dynamic MIMO Power Save Mode */
                                pTxWI->MIMOps = 1;
                        } else if (pMac->MmpsMode == MMPS_STATIC) {
-                               // Static MIMO Power Save Mode
+                               /* Static MIMO Power Save Mode */
                                if (pTransmit->field.MODE >= MODE_HTMIX
                                    && pTransmit->field.MCS > 7) {
                                        pTxWI->MCS = 7;
@@ -1043,7 +1043,7 @@ VOID RTMPWriteTxWI(IN PRTMP_ADAPTER pAd, IN PTXWI_STRUC pOutTxWI, IN BOOLEAN FRA
                                }
                        }
                }
-               //pTxWI->MIMOps = (pMac->PsMode == PWR_MMPS)? 1:0;
+               /*pTxWI->MIMOps = (pMac->PsMode == PWR_MMPS)? 1:0; */
                if (pMac->bIAmBadAtheros
                    && (pMac->WepStatus != Ndis802_11WEPDisabled)) {
                        pTxWI->MpduDensity = 7;
@@ -1068,10 +1068,10 @@ VOID RTMPWriteTxWI_Data(IN PRTMP_ADAPTER pAd,
        pTransmit = pTxBlk->pTransmit;
        pMacEntry = pTxBlk->pMacEntry;
 
-       //
-       // Always use Long preamble before verifiation short preamble functionality works well.
-       // Todo: remove the following line if short preamble functionality works
-       //
+       /* */
+       /* Always use Long preamble before verifiation short preamble functionality works well. */
+       /* Todo: remove the following line if short preamble functionality works */
+       /* */
        OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);
        NdisZeroMemory(pTxWI, TXWI_SIZE);
 
@@ -1084,16 +1084,16 @@ VOID RTMPWriteTxWI_Data(IN PRTMP_ADAPTER pAd,
        pTxWI->MPDUtotalByteCount = pTxBlk->MpduHeaderLen + pTxBlk->SrcBufLen;
        pTxWI->CFACK = TX_BLK_TEST_FLAG(pTxBlk, fTX_bPiggyBack);
 
-       // If CCK or OFDM, BW must be 20
+       /* If CCK or OFDM, BW must be 20 */
        pTxWI->BW =
            (pTransmit->field.MODE <=
             MODE_OFDM) ? (BW_20) : (pTransmit->field.BW);
        pTxWI->AMPDU = ((pTxBlk->TxFrameType == TX_AMPDU_FRAME) ? TRUE : FALSE);
 
-       // John tune the performace with Intel Client in 20 MHz performance
+       /* John tune the performace with Intel Client in 20 MHz performance */
        BASize = pAd->CommonCfg.TxBASize;
        if ((pTxBlk->TxFrameType == TX_AMPDU_FRAME) && (pMacEntry)) {
-               UCHAR RABAOriIdx = 0;   //The RA's BA Originator table index.
+               UCHAR RABAOriIdx = 0;   /*The RA's BA Originator table index. */
 
                RABAOriIdx =
                    pTxBlk->pMacEntry->BAOriWcidArray[pTxBlk->UserPriority];
@@ -1111,10 +1111,10 @@ VOID RTMPWriteTxWI_Data(IN PRTMP_ADAPTER pAd,
        if (pMacEntry) {
                if ((pMacEntry->MmpsMode == MMPS_DYNAMIC)
                    && (pTransmit->field.MCS > 7)) {
-                       // Dynamic MIMO Power Save Mode
+                       /* Dynamic MIMO Power Save Mode */
                        pTxWI->MIMOps = 1;
                } else if (pMacEntry->MmpsMode == MMPS_STATIC) {
-                       // Static MIMO Power Save Mode
+                       /* Static MIMO Power Save Mode */
                        if (pTransmit->field.MODE >= MODE_HTMIX
                            && pTransmit->field.MCS > 7) {
                                pTxWI->MCS = 7;
@@ -1130,7 +1130,7 @@ VOID RTMPWriteTxWI_Data(IN PRTMP_ADAPTER pAd,
                }
        }
 
-       // for rate adapation
+       /* for rate adapation */
        pTxWI->PacketId = pTxWI->MCS;
 }
 
@@ -1140,19 +1140,19 @@ VOID RTMPWriteTxWI_Cache(IN PRTMP_ADAPTER pAd,
        PHTTRANSMIT_SETTING /*pTxHTPhyMode, */ pTransmit;
        PMAC_TABLE_ENTRY pMacEntry;
 
-       //
-       // update TXWI
-       //
+       /* */
+       /* update TXWI */
+       /* */
        pMacEntry = pTxBlk->pMacEntry;
        pTransmit = pTxBlk->pTransmit;
 
-       //if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED))
-       //if (RTMPCheckEntryEnableAutoRateSwitch(pAd, pMacEntry))
-       //if (TX_BLK_TEST_FLAG(pTxBlk, fTX_AutoRateSwitch))
+       /*if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED)) */
+       /*if (RTMPCheckEntryEnableAutoRateSwitch(pAd, pMacEntry)) */
+       /*if (TX_BLK_TEST_FLAG(pTxBlk, fTX_AutoRateSwitch)) */
        if (pMacEntry->bAutoTxRateSwitch) {
                pTxWI->txop = IFS_HTTXOP;
 
-               // If CCK or OFDM, BW must be 20
+               /* If CCK or OFDM, BW must be 20 */
                pTxWI->BW =
                    (pTransmit->field.MODE <=
                     MODE_OFDM) ? (BW_20) : (pTransmit->field.BW);
@@ -1162,7 +1162,7 @@ VOID RTMPWriteTxWI_Cache(IN PRTMP_ADAPTER pAd,
                pTxWI->MCS = pTransmit->field.MCS;
                pTxWI->PHYMODE = pTransmit->field.MODE;
 
-               // set PID for TxRateSwitching
+               /* set PID for TxRateSwitching */
                pTxWI->PacketId = pTransmit->field.MCS;
        }
 
@@ -1170,13 +1170,13 @@ VOID RTMPWriteTxWI_Cache(IN PRTMP_ADAPTER pAd,
        pTxWI->MIMOps = 0;
 
        if (pAd->CommonCfg.bMIMOPSEnable) {
-               // MIMO Power Save Mode
+               /* MIMO Power Save Mode */
                if ((pMacEntry->MmpsMode == MMPS_DYNAMIC)
                    && (pTransmit->field.MCS > 7)) {
-                       // Dynamic MIMO Power Save Mode
+                       /* Dynamic MIMO Power Save Mode */
                        pTxWI->MIMOps = 1;
                } else if (pMacEntry->MmpsMode == MMPS_STATIC) {
-                       // Static MIMO Power Save Mode
+                       /* Static MIMO Power Save Mode */
                        if ((pTransmit->field.MODE >= MODE_HTMIX)
                            && (pTransmit->field.MCS > 7)) {
                                pTxWI->MCS = 7;
@@ -1189,26 +1189,26 @@ VOID RTMPWriteTxWI_Cache(IN PRTMP_ADAPTER pAd,
 
 }
 
-// should be called only when -
-// 1. MEADIA_CONNECTED
-// 2. AGGREGATION_IN_USED
-// 3. Fragmentation not in used
-// 4. either no previous frame (pPrevAddr1=NULL) .OR. previoud frame is aggregatible
+/* should be called only when - */
+/* 1. MEADIA_CONNECTED */
+/* 2. AGGREGATION_IN_USED */
+/* 3. Fragmentation not in used */
+/* 4. either no previous frame (pPrevAddr1=NULL) .OR. previoud frame is aggregatible */
 BOOLEAN TxFrameIsAggregatible(IN PRTMP_ADAPTER pAd,
                              IN PUCHAR pPrevAddr1, IN PUCHAR p8023hdr)
 {
 
-       // can't aggregate EAPOL (802.1x) frame
+       /* can't aggregate EAPOL (802.1x) frame */
        if ((p8023hdr[12] == 0x88) && (p8023hdr[13] == 0x8e))
                return FALSE;
 
-       // can't aggregate multicast/broadcast frame
+       /* can't aggregate multicast/broadcast frame */
        if (p8023hdr[0] & 0x01)
                return FALSE;
 
-       if (INFRA_ON(pAd))      // must be unicast to AP
+       if (INFRA_ON(pAd))      /* must be unicast to AP */
                return TRUE;
-       else if ((pPrevAddr1 == NULL) || MAC_ADDR_EQUAL(pPrevAddr1, p8023hdr))  // unicast to same STA
+       else if ((pPrevAddr1 == NULL) || MAC_ADDR_EQUAL(pPrevAddr1, p8023hdr))  /* unicast to same STA */
                return TRUE;
        else
                return FALSE;
@@ -1241,10 +1241,10 @@ BOOLEAN PeerIsAggreOn(IN PRTMP_ADAPTER pAd,
                        return TRUE;
                }
 #ifdef AGGREGATION_SUPPORT
-               if (TxRate >= RATE_6 && pAd->CommonCfg.bAggregationCapable && (!(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) && CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_WMM_CAPABLE)))) {  // legacy  Ralink Aggregation support
+               if (TxRate >= RATE_6 && pAd->CommonCfg.bAggregationCapable && (!(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) && CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_WMM_CAPABLE)))) {  /* legacy  Ralink Aggregation support */
                        return TRUE;
                }
-#endif // AGGREGATION_SUPPORT //
+#endif /* AGGREGATION_SUPPORT // */
        }
 
        return FALSE;
@@ -1273,9 +1273,9 @@ PQUEUE_HEADER RTMPCheckTxSwQueue(IN PRTMP_ADAPTER pAd, OUT PUCHAR pQueIdx)
 {
 
        ULONG Number;
-       // 2004-11-15 to be removed. test aggregation only
-//      if ((OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED)) && (*pNumber < 2))
-//               return NULL;
+       /* 2004-11-15 to be removed. test aggregation only */
+/*      if ((OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED)) && (*pNumber < 2)) */
+/*               return NULL; */
 
        Number = pAd->TxSwQueue[QID_AC_BK].Number
            + pAd->TxSwQueue[QID_AC_BE].Number
@@ -1295,7 +1295,7 @@ PQUEUE_HEADER RTMPCheckTxSwQueue(IN PRTMP_ADAPTER pAd, OUT PUCHAR pQueIdx)
                *pQueIdx = QID_AC_BK;
                return (&pAd->TxSwQueue[QID_AC_BK]);
        }
-       // No packet pending in Tx Sw queue
+       /* No packet pending in Tx Sw queue */
        *pQueIdx = QID_AC_BK;
 
        return (NULL);
@@ -1321,19 +1321,19 @@ VOID RTMPSuspendMsduTransmission(IN PRTMP_ADAPTER pAd)
 {
        DBGPRINT(RT_DEBUG_TRACE, ("SCANNING, suspend MSDU transmission ...\n"));
 
-       //
-       // Before BSS_SCAN_IN_PROGRESS, we need to keep Current R66 value and
-       // use Lowbound as R66 value on ScanNextChannel(...)
-       //
+       /* */
+       /* Before BSS_SCAN_IN_PROGRESS, we need to keep Current R66 value and */
+       /* use Lowbound as R66 value on ScanNextChannel(...) */
+       /* */
        RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R66,
                                    &pAd->BbpTuning.R66CurrentValue);
 
-       // set BBP_R66 to 0x30/0x40 when scanning (AsicSwitchChannel will set R66 according to channel when scanning)
-       //RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, (0x26 + GET_LNA_GAIN(pAd)));
+       /* set BBP_R66 to 0x30/0x40 when scanning (AsicSwitchChannel will set R66 according to channel when scanning) */
+       /*RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, (0x26 + GET_LNA_GAIN(pAd))); */
        RTMPSetAGCInitValue(pAd, BW_20);
 
        RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
-       //RTMP_IO_WRITE32(pAd, TX_CNTL_CSR, 0x000f0000);                // abort all TX rings
+       /*RTMP_IO_WRITE32(pAd, TX_CNTL_CSR, 0x000f0000);                // abort all TX rings */
 }
 
 /*
@@ -1356,12 +1356,12 @@ VOID RTMPSuspendMsduTransmission(IN PRTMP_ADAPTER pAd)
 */
 VOID RTMPResumeMsduTransmission(IN PRTMP_ADAPTER pAd)
 {
-//    UCHAR                     IrqState;
+/*    UCHAR                     IrqState; */
 
        DBGPRINT(RT_DEBUG_TRACE, ("SCAN done, resume MSDU transmission ...\n"));
 
-       // After finish BSS_SCAN_IN_PROGRESS, we need to restore Current R66 value
-       // R66 should not be 0
+       /* After finish BSS_SCAN_IN_PROGRESS, we need to restore Current R66 value */
+       /* R66 should not be 0 */
        if (pAd->BbpTuning.R66CurrentValue == 0) {
                pAd->BbpTuning.R66CurrentValue = 0x38;
                DBGPRINT_ERR(("RTMPResumeMsduTransmission, R66CurrentValue=0...\n"));
@@ -1371,11 +1371,11 @@ VOID RTMPResumeMsduTransmission(IN PRTMP_ADAPTER pAd)
                                     pAd->BbpTuning.R66CurrentValue);
 
        RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
-// sample, for IRQ LOCK to SEM LOCK
-//    IrqState = pAd->irq_disabled;
-//      if (IrqState)
-//              RTMPDeQueuePacket(pAd, TRUE, NUM_OF_TX_RING, MAX_TX_PROCESS);
-//    else
+/* sample, for IRQ LOCK to SEM LOCK */
+/*    IrqState = pAd->irq_disabled; */
+/*      if (IrqState) */
+/*              RTMPDeQueuePacket(pAd, TRUE, NUM_OF_TX_RING, MAX_TX_PROCESS); */
+/*    else */
        RTMPDeQueuePacket(pAd, FALSE, NUM_OF_TX_RING, MAX_TX_PROCESS);
 }
 
@@ -1398,9 +1398,9 @@ UINT deaggregate_AMSDU_announce(IN PRTMP_ADAPTER pAd,
 
                nMSDU++;
 
-               //hex_dump("subheader", pData, 64);
+               /*hex_dump("subheader", pData, 64); */
                pAMSDUsubheader = (PHEADER_802_3) pData;
-               //pData += LENGTH_802_3;
+               /*pData += LENGTH_802_3; */
                PayloadSize =
                    pAMSDUsubheader->Octet[1] +
                    (pAMSDUsubheader->Octet[0] << 8);
@@ -1409,13 +1409,13 @@ UINT deaggregate_AMSDU_announce(IN PRTMP_ADAPTER pAd,
                if ((DataSize < SubFrameSize) || (PayloadSize > 1518)) {
                        break;
                }
-               //DBGPRINT(RT_DEBUG_TRACE,("%d subframe: Size = %d\n",  nMSDU, PayloadSize));
+               /*DBGPRINT(RT_DEBUG_TRACE,("%d subframe: Size = %d\n",  nMSDU, PayloadSize)); */
 
                pPayload = pData + LENGTH_802_3;
                pDA = pData;
                pSA = pData + MAC_ADDR_LEN;
 
-               // convert to 802.3 header
+               /* convert to 802.3 header */
                CONVERT_TO_802_3(Header802_3, pDA, pSA, pPayload, PayloadSize,
                                 pRemovedLLCSNAP);
 
@@ -1431,7 +1431,7 @@ UINT deaggregate_AMSDU_announce(IN PRTMP_ADAPTER pAd,
                                Elem->MsgLen =
                                    LENGTH_802_11 + LENGTH_802_1_H +
                                    PayloadSize;
-                               //WpaEAPOLKeyAction(pAd, Elem);
+                               /*WpaEAPOLKeyAction(pAd, Elem); */
                                REPORT_MGMT_FRAME_TO_MLME(pAd, BSSID_WCID,
                                                          Elem->Msg,
                                                          Elem->MsgLen, 0, 0, 0,
@@ -1456,8 +1456,8 @@ UINT deaggregate_AMSDU_announce(IN PRTMP_ADAPTER pAd,
                                                         (pPacket));
                }
 
-               // A-MSDU has padding to multiple of 4 including subframe header.
-               // align SubFrameSize up to multiple of 4
+               /* A-MSDU has padding to multiple of 4 including subframe header. */
+               /* align SubFrameSize up to multiple of 4 */
                SubFrameSize = (SubFrameSize + 3) & (~0x3);
 
                if (SubFrameSize > 1528 || SubFrameSize < 32) {
@@ -1468,12 +1468,12 @@ UINT deaggregate_AMSDU_announce(IN PRTMP_ADAPTER pAd,
                        pData += SubFrameSize;
                        DataSize -= SubFrameSize;
                } else {
-                       // end of A-MSDU
+                       /* end of A-MSDU */
                        DataSize = 0;
                }
        }
 
-       // finally release original rx packet
+       /* finally release original rx packet */
        RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_SUCCESS);
 
        return nMSDU;
@@ -1528,10 +1528,10 @@ MAC_TABLE_ENTRY *MacTableInsertEntry(IN PRTMP_ADAPTER pAd,
        UCHAR HashIdx;
        int i, FirstWcid;
        MAC_TABLE_ENTRY *pEntry = NULL, *pCurrEntry;
-//      USHORT  offset;
-//      ULONG   addr;
+/*      USHORT  offset; */
+/*      ULONG   addr; */
 
-       // if FULL, return
+       /* if FULL, return */
        if (pAd->MacTab.Size >= MAX_LEN_OF_MAC_TABLE)
                return NULL;
 
@@ -1540,11 +1540,11 @@ MAC_TABLE_ENTRY *MacTableInsertEntry(IN PRTMP_ADAPTER pAd,
        if (pAd->StaCfg.BssType == BSS_INFRA)
                FirstWcid = 2;
 
-       // allocate one MAC entry
+       /* allocate one MAC entry */
        NdisAcquireSpinLock(&pAd->MacTabLock);
-       for (i = FirstWcid; i < MAX_LEN_OF_MAC_TABLE; i++)      // skip entry#0 so that "entry index == AID" for fast lookup
+       for (i = FirstWcid; i < MAX_LEN_OF_MAC_TABLE; i++)      /* skip entry#0 so that "entry index == AID" for fast lookup */
        {
-               // pick up the first available vacancy
+               /* pick up the first available vacancy */
                if ((pAd->MacTab.Content[i].ValidAsCLI == FALSE) &&
                    (pAd->MacTab.Content[i].ValidAsWDS == FALSE) &&
                    (pAd->MacTab.Content[i].ValidAsApCli == FALSE) &&
@@ -1602,7 +1602,7 @@ MAC_TABLE_ENTRY *MacTableInsertEntry(IN PRTMP_ADAPTER pAd,
                                                                   pEntry->
                                                                   apidx,
                                                                   (UCHAR) i);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
                                }
                        }
 
@@ -1615,7 +1615,7 @@ MAC_TABLE_ENTRY *MacTableInsertEntry(IN PRTMP_ADAPTER pAd,
                        COPY_MAC_ADDR(pEntry->Addr, pAddr);
                        pEntry->Sst = SST_NOT_AUTH;
                        pEntry->AuthState = AS_NOT_AUTH;
-                       pEntry->Aid = (USHORT) i;       //0;
+                       pEntry->Aid = (USHORT) i;       /*0; */
                        pEntry->CapabilityInfo = 0;
                        pEntry->PsMode = PWR_ACTIVE;
                        pEntry->PsQIdleCount = 0;
@@ -1625,7 +1625,7 @@ MAC_TABLE_ENTRY *MacTableInsertEntry(IN PRTMP_ADAPTER pAd,
                        InitializeQueueHeader(&pEntry->PsQueue);
 
                        pAd->MacTab.Size++;
-                       // Add this entry into ASIC RX WCID search table
+                       /* Add this entry into ASIC RX WCID search table */
                        RTMP_STA_ENTRY_ADD(pAd, pEntry);
 
                        DBGPRINT(RT_DEBUG_TRACE,
@@ -1635,7 +1635,7 @@ MAC_TABLE_ENTRY *MacTableInsertEntry(IN PRTMP_ADAPTER pAd,
                }
        }
 
-       // add this MAC entry into HASH table
+       /* add this MAC entry into HASH table */
        if (pEntry) {
                HashIdx = MAC_ADDR_HASH_INDEX(pAddr);
                if (pAd->MacTab.Hash[HashIdx] == NULL) {
@@ -1664,8 +1664,8 @@ BOOLEAN MacTableDeleteEntry(IN PRTMP_ADAPTER pAd,
        USHORT HashIdx;
        MAC_TABLE_ENTRY *pEntry, *pPrevEntry, *pProbeEntry;
        BOOLEAN Cancelled;
-       //USHORT        offset; // unused variable
-       //UCHAR j;                      // unused variable
+       /*USHORT        offset; // unused variable */
+       /*UCHAR j;                      // unused variable */
 
        if (wcid >= MAX_LEN_OF_MAC_TABLE)
                return FALSE;
@@ -1673,7 +1673,7 @@ BOOLEAN MacTableDeleteEntry(IN PRTMP_ADAPTER pAd,
        NdisAcquireSpinLock(&pAd->MacTabLock);
 
        HashIdx = MAC_ADDR_HASH_INDEX(pAddr);
-       //pEntry = pAd->MacTab.Hash[HashIdx];
+       /*pEntry = pAd->MacTab.Hash[HashIdx]; */
        pEntry = &pAd->MacTab.Content[wcid];
 
        if (pEntry
@@ -1681,17 +1681,17 @@ BOOLEAN MacTableDeleteEntry(IN PRTMP_ADAPTER pAd,
                || pEntry->ValidAsMesh)) {
                if (MAC_ADDR_EQUAL(pEntry->Addr, pAddr)) {
 
-                       // Delete this entry from ASIC on-chip WCID Table
+                       /* Delete this entry from ASIC on-chip WCID Table */
                        RTMP_STA_ENTRY_MAC_RESET(pAd, wcid);
 
-                       // free resources of BA
+                       /* free resources of BA */
                        BASessionTearDownALL(pAd, pEntry->Aid);
 
                        pPrevEntry = NULL;
                        pProbeEntry = pAd->MacTab.Hash[HashIdx];
                        ASSERT(pProbeEntry);
 
-                       // update Hash list
+                       /* update Hash list */
                        do {
                                if (pProbeEntry == pEntry) {
                                        if (pPrevEntry == NULL) {
@@ -1708,7 +1708,7 @@ BOOLEAN MacTableDeleteEntry(IN PRTMP_ADAPTER pAd,
                                pProbeEntry = pProbeEntry->pNext;
                        } while (pProbeEntry);
 
-                       // not found !!!
+                       /* not found !!! */
                        ASSERT(pProbeEntry != NULL);
 
                        RTMP_STA_ENTRY_KEY_DEL(pAd, BSS0, wcid);
@@ -1736,11 +1736,10 @@ BOOLEAN MacTableDeleteEntry(IN PRTMP_ADAPTER pAd,
 
        NdisReleaseSpinLock(&pAd->MacTabLock);
 
-       //Reset operating mode when no Sta.
+       /*Reset operating mode when no Sta. */
        if (pAd->MacTab.Size == 0) {
                pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode = 0;
-               //AsicUpdateProtect(pAd, 0 /*pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode*/, (ALLN_SETPROTECT), TRUE, 0 /*pAd->MacTab.fAnyStationNonGF*/);
-               RTMP_UPDATE_PROTECT(pAd);       // edit by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet
+               RTMP_UPDATE_PROTECT(pAd);       /* edit by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet */
        }
 
        return TRUE;
@@ -1758,15 +1757,15 @@ VOID MacTableReset(IN PRTMP_ADAPTER pAd)
        int i;
 
        DBGPRINT(RT_DEBUG_TRACE, ("MacTableReset\n"));
-       //NdisAcquireSpinLock(&pAd->MacTabLock);
+       /*NdisAcquireSpinLock(&pAd->MacTabLock); */
 
        for (i = 1; i < MAX_LEN_OF_MAC_TABLE; i++) {
 #ifdef RTMP_MAC_PCI
                RTMP_STA_ENTRY_MAC_RESET(pAd, i);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
                if (pAd->MacTab.Content[i].ValidAsCLI == TRUE) {
 
-                       // free resources of BA
+                       /* free resources of BA */
                        BASessionTearDownALL(pAd, i);
 
                        pAd->MacTab.Content[i].ValidAsCLI = FALSE;
@@ -1774,9 +1773,9 @@ VOID MacTableReset(IN PRTMP_ADAPTER pAd)
 #ifdef RTMP_MAC_USB
                        NdisZeroMemory(pAd->MacTab.Content[i].Addr, 6);
                        RTMP_STA_ENTRY_MAC_RESET(pAd, i);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
-                       //AsicDelWcidTab(pAd, i);
+                       /*AsicDelWcidTab(pAd, i); */
                }
        }
 
@@ -1798,8 +1797,8 @@ VOID AssocParmFill(IN PRTMP_ADAPTER pAd,
                   IN ULONG Timeout, IN USHORT ListenIntv)
 {
        COPY_MAC_ADDR(AssocReq->Addr, pAddr);
-       // Add mask to support 802.11b mode only
-       AssocReq->CapabilityInfo = CapabilityInfo & SUPPORTED_CAPABILITY_INFO;  // not cf-pollable, not cf-poll-request
+       /* Add mask to support 802.11b mode only */
+       AssocReq->CapabilityInfo = CapabilityInfo & SUPPORTED_CAPABILITY_INFO;  /* not cf-pollable, not cf-poll-request */
        AssocReq->Timeout = Timeout;
        AssocReq->ListenIntv = ListenIntv;
 }
@@ -1874,9 +1873,9 @@ BOOLEAN RTMPCheckDHCPFrame(IN PRTMP_ADAPTER pAd, IN PNDIS_PACKET pPacket)
        pSrc = (PUCHAR) pVirtualAddress;
        Protocol = *(pSrc + 12) * 256 + *(pSrc + 13);
 
-       //
-       // Check DHCP & BOOTP protocol
-       //
+       /* */
+       /* Check DHCP & BOOTP protocol */
+       /* */
        while (NumberOfBytesRead <= PacketInfo.TotalPacketLength) {
                if ((NumberOfBytesRead >= 35) && (ReadFirstParm == TRUE)) {
                        CurrentOffset =
@@ -1889,19 +1888,19 @@ BOOLEAN RTMPCheckDHCPFrame(IN PRTMP_ADAPTER pAd, IN PNDIS_PACKET pPacket)
                        CurrentOffset =
                            37 - (NumberOfBytesRead - NdisBufferLength);
                        ByteOffset38 = *(pSrc + CurrentOffset);
-                       //End of Read
+                       /*End of Read */
                        break;
                }
                return FALSE;
        }
 
-       // Check for DHCP & BOOTP protocol
+       /* Check for DHCP & BOOTP protocol */
        if ((ByteOffset36 != 0x44) || (ByteOffset38 != 0x43)) {
-               //
-               // 2054 (hex 0806) for ARP datagrams
-               // if this packet is not ARP datagrams, then do nothing
-               // ARP datagrams will also be duplicate at 1mb broadcast frames
-               //
+               /* */
+               /* 2054 (hex 0806) for ARP datagrams */
+               /* if this packet is not ARP datagrams, then do nothing */
+               /* ARP datagrams will also be duplicate at 1mb broadcast frames */
+               /* */
                if (Protocol != 0x0806)
                        return FALSE;
        }
@@ -1925,12 +1924,12 @@ BOOLEAN RTMPCheckEtherType(IN PRTMP_ADAPTER pAd, IN PNDIS_PACKET pPacket)
 
        RTMP_SET_PACKET_SPECIFIC(pPacket, 0);
 
-       // get Ethernet protocol field
+       /* get Ethernet protocol field */
        TypeLen = (pSrcBuf[12] << 8) | pSrcBuf[13];
 
-       pSrcBuf += LENGTH_802_3;        // Skip the Ethernet Header.
+       pSrcBuf += LENGTH_802_3;        /* Skip the Ethernet Header. */
 
-       if (TypeLen <= 1500) {  // 802.3, 802.3 LLC
+       if (TypeLen <= 1500) {  /* 802.3, 802.3 LLC */
                /*
                   DestMAC(6) + SrcMAC(6) + Lenght(2) +
                   DSAP(1) + SSAP(1) + Control(1) +
@@ -1943,12 +1942,12 @@ BOOLEAN RTMPCheckEtherType(IN PRTMP_ADAPTER pAd, IN PNDIS_PACKET pPacket)
                                                  &Byte0, &Byte1);
                        RTMP_SET_PACKET_LLCSNAP(pPacket, 1);
                        TypeLen = (USHORT) ((Byte0 << 8) + Byte1);
-                       pSrcBuf += 8;   // Skip this LLC/SNAP header
+                       pSrcBuf += 8;   /* Skip this LLC/SNAP header */
                } else {
-                       //It just has 3-byte LLC header, maybe a legacy ether type frame. we didn't handle it.
+                       /*It just has 3-byte LLC header, maybe a legacy ether type frame. we didn't handle it. */
                }
        }
-       // If it's a VLAN packet, get the real Type/Length field.
+       /* If it's a VLAN packet, get the real Type/Length field. */
        if (TypeLen == 0x8100) {
                /* 0x8100 means VLAN packets */
 
@@ -1966,17 +1965,17 @@ BOOLEAN RTMPCheckEtherType(IN PRTMP_ADAPTER pAd, IN PNDIS_PACKET pPacket)
                                          &Byte1);
                TypeLen = (USHORT) ((Byte0 << 8) + Byte1);
 
-               pSrcBuf += 4;   // Skip the VLAN Header.
+               pSrcBuf += 4;   /* Skip the VLAN Header. */
        }
 
        switch (TypeLen) {
        case 0x0800:
                {
                        ASSERT((pktLen > 34));
-                       if (*(pSrcBuf + 9) == 0x11) {   // udp packet
-                               ASSERT((pktLen > 34));  // 14 for ethernet header, 20 for IP header
+                       if (*(pSrcBuf + 9) == 0x11) {   /* udp packet */
+                               ASSERT((pktLen > 34));  /* 14 for ethernet header, 20 for IP header */
 
-                               pSrcBuf += 20;  // Skip the IP header
+                               pSrcBuf += 20;  /* Skip the IP header */
                                srcPort =
                                    OS_NTOHS(get_unaligned
                                             ((PUINT16) (pSrcBuf)));
@@ -1984,7 +1983,7 @@ BOOLEAN RTMPCheckEtherType(IN PRTMP_ADAPTER pAd, IN PNDIS_PACKET pPacket)
                                    OS_NTOHS(get_unaligned
                                             ((PUINT16) (pSrcBuf + 2)));
 
-                               if ((srcPort == 0x44 && dstPort == 0x43) || (srcPort == 0x43 && dstPort == 0x44)) {     //It's a BOOTP/DHCP packet
+                               if ((srcPort == 0x44 && dstPort == 0x43) || (srcPort == 0x43 && dstPort == 0x44)) {     /*It's a BOOTP/DHCP packet */
                                        RTMP_SET_PACKET_DHCP(pPacket, 1);
                                }
                        }
@@ -1992,13 +1991,13 @@ BOOLEAN RTMPCheckEtherType(IN PRTMP_ADAPTER pAd, IN PNDIS_PACKET pPacket)
                break;
        case 0x0806:
                {
-                       //ARP Packet.
+                       /*ARP Packet. */
                        RTMP_SET_PACKET_DHCP(pPacket, 1);
                }
                break;
        case 0x888e:
                {
-                       // EAPOL Packet.
+                       /* EAPOL Packet. */
                        RTMP_SET_PACKET_EAPOL(pPacket, 1);
                }
                break;
@@ -2040,22 +2039,22 @@ VOID Update_Rssi_Sample(IN PRTMP_ADAPTER pAd,
        }
 }
 
-// Normal legacy Rx packet indication
+/* Normal legacy Rx packet indication */
 VOID Indicate_Legacy_Packet(IN PRTMP_ADAPTER pAd,
                            IN RX_BLK * pRxBlk, IN UCHAR FromWhichBSSID)
 {
        PNDIS_PACKET pRxPacket = pRxBlk->pRxPacket;
        UCHAR Header802_3[LENGTH_802_3];
 
-       // 1. get 802.3 Header
-       // 2. remove LLC
-       //              a. pointer pRxBlk->pData to payload
-       //      b. modify pRxBlk->DataSize
+       /* 1. get 802.3 Header */
+       /* 2. remove LLC */
+       /*              a. pointer pRxBlk->pData to payload */
+       /*      b. modify pRxBlk->DataSize */
        RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
 
        if (pRxBlk->DataSize > MAX_RX_PKT_LEN) {
 
-               // release packet
+               /* release packet */
                RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
                return;
        }
@@ -2070,13 +2069,13 @@ VOID Indicate_Legacy_Packet(IN PRTMP_ADAPTER pAd,
                UCHAR TID = pRxBlk->pRxWI->TID;
                USHORT Idx;
 
-#define REORDERING_PACKET_TIMEOUT              ((100 * OS_HZ)/1000)    // system ticks -- 100 ms
+#define REORDERING_PACKET_TIMEOUT              ((100 * OS_HZ)/1000)    /* system ticks -- 100 ms */
 
                if (Wcid < MAX_LEN_OF_MAC_TABLE) {
                        Idx = pAd->MacTab.Content[Wcid].BARecWcidArray[TID];
                        if (Idx != 0) {
                                pBAEntry = &pAd->BATable.BARecEntry[Idx];
-                               // update last rx time
+                               /* update last rx time */
                                NdisGetSystemUpTime(&Now32);
                                if ((pBAEntry->list.qlen > 0) &&
                                    RTMP_TIME_AFTER((unsigned long)Now32,
@@ -2101,17 +2100,17 @@ VOID Indicate_Legacy_Packet(IN PRTMP_ADAPTER pAd,
                        }
                }
        }
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
        wlan_802_11_to_802_3_packet(pAd, pRxBlk, Header802_3, FromWhichBSSID);
 
-       //
-       // pass this 802.3 packet to upper layer or forward this packet to WM directly
-       //
+       /* */
+       /* pass this 802.3 packet to upper layer or forward this packet to WM directly */
+       /* */
        ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pRxPacket, FromWhichBSSID);
 }
 
-// Normal, AMPDU or AMSDU
+/* Normal, AMPDU or AMSDU */
 VOID CmmRxnonRalinkFrameIndicate(IN PRTMP_ADAPTER pAd,
                                 IN RX_BLK * pRxBlk, IN UCHAR FromWhichBSSID)
 {
@@ -2120,7 +2119,7 @@ VOID CmmRxnonRalinkFrameIndicate(IN PRTMP_ADAPTER pAd,
                Indicate_AMPDU_Packet(pAd, pRxBlk, FromWhichBSSID);
        } else {
                if (RX_BLK_TEST_FLAG(pRxBlk, fRX_AMSDU)) {
-                       // handle A-MSDU
+                       /* handle A-MSDU */
                        Indicate_AMSDU_Packet(pAd, pRxBlk, FromWhichBSSID);
                } else {
                        Indicate_Legacy_Packet(pAd, pRxBlk, FromWhichBSSID);
@@ -2145,18 +2144,18 @@ VOID CmmRxRalinkFrameIndicate(IN PRTMP_ADAPTER pAd,
                pRxBlk->pData += 2;
                pRxBlk->DataSize -= 2;
        } else {
-               // release packet
+               /* release packet */
                RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket,
                                    NDIS_STATUS_FAILURE);
                return;
        }
 
-       // get 802.3 Header and  remove LLC
+       /* get 802.3 Header and  remove LLC */
        RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
 
        ASSERT(pRxBlk->pRxPacket);
 
-       // Ralink Aggregation frame
+       /* Ralink Aggregation frame */
        pAd->RalinkCounters.OneSecRxAggregationCount++;
        Payload1Size = pRxBlk->DataSize - Msdu2Size;
        Payload2Size = Msdu2Size - LENGTH_802_3;
@@ -2168,12 +2167,12 @@ VOID CmmRxRalinkFrameIndicate(IN PRTMP_ADAPTER pAd,
                          Payload2Size, FromWhichBSSID);
 
        if (!pPacket2) {
-               // release packet
+               /* release packet */
                RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket,
                                    NDIS_STATUS_FAILURE);
                return;
        }
-       // update payload size of 1st packet
+       /* update payload size of 1st packet */
        pRxBlk->DataSize = Payload1Size;
        wlan_802_11_to_802_3_packet(pAd, pRxBlk, Header802_3, FromWhichBSSID);
 
@@ -2208,10 +2207,10 @@ PNDIS_PACKET RTMPDeFragmentDataFrame(IN PRTMP_ADAPTER pAd, IN RX_BLK * pRxBlk)
 
        HeaderRoom = pData - (UCHAR *) pHeader;
 
-       // Re-assemble the fragmented packets
-       if (pHeader->Frag == 0) // Frag. Number is 0 : First frag or only one pkt
+       /* Re-assemble the fragmented packets */
+       if (pHeader->Frag == 0) /* Frag. Number is 0 : First frag or only one pkt */
        {
-               // the first pkt of fragment, record it.
+               /* the first pkt of fragment, record it. */
                if (pHeader->FC.MoreFrag) {
                        ASSERT(pAd->FragFrame.pFragPacket);
                        pFragBuffer =
@@ -2220,67 +2219,67 @@ PNDIS_PACKET RTMPDeFragmentDataFrame(IN PRTMP_ADAPTER pAd, IN RX_BLK * pRxBlk)
                        NdisMoveMemory(pFragBuffer, pHeader,
                                       pAd->FragFrame.RxSize);
                        pAd->FragFrame.Sequence = pHeader->Sequence;
-                       pAd->FragFrame.LastFrag = pHeader->Frag;        // Should be 0
+                       pAd->FragFrame.LastFrag = pHeader->Frag;        /* Should be 0 */
                        ASSERT(pAd->FragFrame.LastFrag == 0);
-                       goto done;      // end of processing this frame
+                       goto done;      /* end of processing this frame */
                }
-       } else                  //Middle & End of fragment
+       } else                  /*Middle & End of fragment */
        {
                if ((pHeader->Sequence != pAd->FragFrame.Sequence) ||
                    (pHeader->Frag != (pAd->FragFrame.LastFrag + 1))) {
-                       // Fragment is not the same sequence or out of fragment number order
-                       // Reset Fragment control blk
+                       /* Fragment is not the same sequence or out of fragment number order */
+                       /* Reset Fragment control blk */
                        RESET_FRAGFRAME(pAd->FragFrame);
                        DBGPRINT(RT_DEBUG_ERROR,
                                 ("Fragment is not the same sequence or out of fragment number order.\n"));
-                       goto done;      // give up this frame
+                       goto done;      /* give up this frame */
                } else if ((pAd->FragFrame.RxSize + DataSize) > MAX_FRAME_SIZE) {
-                       // Fragment frame is too large, it exeeds the maximum frame size.
-                       // Reset Fragment control blk
+                       /* Fragment frame is too large, it exeeds the maximum frame size. */
+                       /* Reset Fragment control blk */
                        RESET_FRAGFRAME(pAd->FragFrame);
                        DBGPRINT(RT_DEBUG_ERROR,
                                 ("Fragment frame is too large, it exeeds the maximum frame size.\n"));
-                       goto done;      // give up this frame
+                       goto done;      /* give up this frame */
                }
-               //
-               // Broadcom AP(BCM94704AGR) will send out LLC in fragment's packet, LLC only can accpet at first fragment.
-               // In this case, we will dropt it.
-               //
+               /* */
+               /* Broadcom AP(BCM94704AGR) will send out LLC in fragment's packet, LLC only can accpet at first fragment. */
+               /* In this case, we will dropt it. */
+               /* */
                if (NdisEqualMemory(pData, SNAP_802_1H, sizeof(SNAP_802_1H))) {
                        DBGPRINT(RT_DEBUG_ERROR,
                                 ("Find another LLC at Middle or End fragment(SN=%d, Frag=%d)\n",
                                  pHeader->Sequence, pHeader->Frag));
-                       goto done;      // give up this frame
+                       goto done;      /* give up this frame */
                }
 
                pFragBuffer = GET_OS_PKT_DATAPTR(pAd->FragFrame.pFragPacket);
 
-               // concatenate this fragment into the re-assembly buffer
+               /* concatenate this fragment into the re-assembly buffer */
                NdisMoveMemory((pFragBuffer + pAd->FragFrame.RxSize), pData,
                               DataSize);
                pAd->FragFrame.RxSize += DataSize;
-               pAd->FragFrame.LastFrag = pHeader->Frag;        // Update fragment number
+               pAd->FragFrame.LastFrag = pHeader->Frag;        /* Update fragment number */
 
-               // Last fragment
+               /* Last fragment */
                if (pHeader->FC.MoreFrag == FALSE) {
                        bReassDone = TRUE;
                }
        }
 
 done:
-       // always release rx fragmented packet
+       /* always release rx fragmented packet */
        RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
 
-       // return defragmented packet if packet is reassembled completely
-       // otherwise return NULL
+       /* return defragmented packet if packet is reassembled completely */
+       /* otherwise return NULL */
        if (bReassDone) {
                PNDIS_PACKET pNewFragPacket;
 
-               // allocate a new packet buffer for fragment
+               /* allocate a new packet buffer for fragment */
                pNewFragPacket =
                    RTMP_AllocateFragPacketBuffer(pAd, RX_BUFFER_NORMSIZE);
                if (pNewFragPacket) {
-                       // update RxBlk
+                       /* update RxBlk */
                        pRetPacket = pAd->FragFrame.pFragPacket;
                        pAd->FragFrame.pFragPacket = pNewFragPacket;
                        pRxBlk->pHeader =
@@ -2322,14 +2321,14 @@ VOID Indicate_EAPOL_Packet(IN PRTMP_ADAPTER pAd,
        if (pEntry == NULL) {
                DBGPRINT(RT_DEBUG_WARN,
                         ("Indicate_EAPOL_Packet: drop and release the invalid packet.\n"));
-               // release packet
+               /* release packet */
                RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket,
                                    NDIS_STATUS_FAILURE);
                return;
        }
 }
 
-#define BCN_TBTT_OFFSET                64      //defer 64 us
+#define BCN_TBTT_OFFSET                64      /*defer 64 us */
 VOID ReSyncBeaconTime(IN PRTMP_ADAPTER pAd)
 {
 
@@ -2339,21 +2338,21 @@ VOID ReSyncBeaconTime(IN PRTMP_ADAPTER pAd)
 
        pAd->TbttTickCount++;
 
-       //
-       // The updated BeaconInterval Value will affect Beacon Interval after two TBTT
-       // beacasue the original BeaconInterval had been loaded into next TBTT_TIMER
-       //
+       /* */
+       /* The updated BeaconInterval Value will affect Beacon Interval after two TBTT */
+       /* beacasue the original BeaconInterval had been loaded into next TBTT_TIMER */
+       /* */
        if (Offset == (BCN_TBTT_OFFSET - 2)) {
                BCN_TIME_CFG_STRUC csr;
                RTMP_IO_READ32(pAd, BCN_TIME_CFG, &csr.word);
-               csr.field.BeaconInterval = (pAd->CommonCfg.BeaconPeriod << 4) - 1;      // ASIC register in units of 1/16 TU = 64us
+               csr.field.BeaconInterval = (pAd->CommonCfg.BeaconPeriod << 4) - 1;      /* ASIC register in units of 1/16 TU = 64us */
                RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr.word);
        } else {
                if (Offset == (BCN_TBTT_OFFSET - 1)) {
                        BCN_TIME_CFG_STRUC csr;
 
                        RTMP_IO_READ32(pAd, BCN_TIME_CFG, &csr.word);
-                       csr.field.BeaconInterval = (pAd->CommonCfg.BeaconPeriod) << 4;  // ASIC register in units of 1/16 TU
+                       csr.field.BeaconInterval = (pAd->CommonCfg.BeaconPeriod) << 4;  /* ASIC register in units of 1/16 TU */
                        RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr.word);
                }
        }
index f98f1a8..157ebc6 100644 (file)
@@ -44,23 +44,23 @@ USHORT RtmpPCI_WriteTxResource(IN PRTMP_ADAPTER pAd,
        PRTMP_TX_RING pTxRing;
        USHORT hwHeaderLen;
 
-       //
-       // get Tx Ring Resource
-       //
+       /* */
+       /* get Tx Ring Resource */
+       /* */
        pTxRing = &pAd->TxRing[pTxBlk->QueIdx];
        TxIdx = pAd->TxRing[pTxBlk->QueIdx].TxCpuIdx;
        pDMAHeaderBufVA = (PUCHAR) pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
        BufBasePaLow =
            RTMP_GetPhysicalAddressLow(pTxRing->Cell[TxIdx].DmaBuf.AllocPa);
 
-       // copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer
+       /* copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer */
        if (pTxBlk->TxFrameType == TX_AMSDU_FRAME) {
-               //hwHeaderLen = ROUND_UP(pTxBlk->MpduHeaderLen-LENGTH_AMSDU_SUBFRAMEHEAD, 4)+LENGTH_AMSDU_SUBFRAMEHEAD;
+               /*hwHeaderLen = ROUND_UP(pTxBlk->MpduHeaderLen-LENGTH_AMSDU_SUBFRAMEHEAD, 4)+LENGTH_AMSDU_SUBFRAMEHEAD; */
                hwHeaderLen =
                    pTxBlk->MpduHeaderLen - LENGTH_AMSDU_SUBFRAMEHEAD +
                    pTxBlk->HdrPadLen + LENGTH_AMSDU_SUBFRAMEHEAD;
        } else {
-               //hwHeaderLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4);
+               /*hwHeaderLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4); */
                hwHeaderLen = pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen;
        }
        NdisMoveMemory(pDMAHeaderBufVA, pTxBlk->HeaderBuf,
@@ -69,15 +69,15 @@ USHORT RtmpPCI_WriteTxResource(IN PRTMP_ADAPTER pAd,
        pTxRing->Cell[TxIdx].pNdisPacket = pTxBlk->pPacket;
        pTxRing->Cell[TxIdx].pNextNdisPacket = NULL;
 
-       //
-       // build Tx Descriptor
-       //
+       /* */
+       /* build Tx Descriptor */
+       /* */
 
        pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
        NdisZeroMemory(pTxD, TXD_SIZE);
 
        pTxD->SDPtr0 = BufBasePaLow;
-       pTxD->SDLen0 = TXINFO_SIZE + TXWI_SIZE + hwHeaderLen;   // include padding
+       pTxD->SDLen0 = TXINFO_SIZE + TXWI_SIZE + hwHeaderLen;   /* include padding */
        pTxD->SDPtr1 = PCI_MAP_SINGLE(pAd, pTxBlk, 0, 1, PCI_DMA_TODEVICE);
        pTxD->SDLen1 = pTxBlk->SrcBufLen;
        pTxD->LastSec0 = 0;
@@ -86,9 +86,9 @@ USHORT RtmpPCI_WriteTxResource(IN PRTMP_ADAPTER pAd,
        RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA);
 
        RetTxIdx = TxIdx;
-       //
-       // Update Tx index
-       //
+       /* */
+       /* Update Tx index */
+       /* */
        INC_RING_INDEX(TxIdx, TX_RING_SIZE);
        pTxRing->TxCpuIdx = TxIdx;
 
@@ -110,17 +110,17 @@ USHORT RtmpPCI_WriteSingleTxResource(IN PRTMP_ADAPTER pAd,
        PRTMP_TX_RING pTxRing;
        USHORT hwHeaderLen;
 
-       //
-       // get Tx Ring Resource
-       //
+       /* */
+       /* get Tx Ring Resource */
+       /* */
        pTxRing = &pAd->TxRing[pTxBlk->QueIdx];
        TxIdx = pAd->TxRing[pTxBlk->QueIdx].TxCpuIdx;
        pDMAHeaderBufVA = (PUCHAR) pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
        BufBasePaLow =
            RTMP_GetPhysicalAddressLow(pTxRing->Cell[TxIdx].DmaBuf.AllocPa);
 
-       // copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer
-       //hwHeaderLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4);
+       /* copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer */
+       /*hwHeaderLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4); */
        hwHeaderLen = pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen;
 
        NdisMoveMemory(pDMAHeaderBufVA, pTxBlk->HeaderBuf,
@@ -129,14 +129,14 @@ USHORT RtmpPCI_WriteSingleTxResource(IN PRTMP_ADAPTER pAd,
        pTxRing->Cell[TxIdx].pNdisPacket = pTxBlk->pPacket;
        pTxRing->Cell[TxIdx].pNextNdisPacket = NULL;
 
-       //
-       // build Tx Descriptor
-       //
+       /* */
+       /* build Tx Descriptor */
+       /* */
        pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
        NdisZeroMemory(pTxD, TXD_SIZE);
 
        pTxD->SDPtr0 = BufBasePaLow;
-       pTxD->SDLen0 = TXINFO_SIZE + TXWI_SIZE + hwHeaderLen;   // include padding
+       pTxD->SDLen0 = TXINFO_SIZE + TXWI_SIZE + hwHeaderLen;   /* include padding */
        pTxD->SDPtr1 = PCI_MAP_SINGLE(pAd, pTxBlk, 0, 1, PCI_DMA_TODEVICE);;
        pTxD->SDLen1 = pTxBlk->SrcBufLen;
        pTxD->LastSec0 = 0;
@@ -145,9 +145,9 @@ USHORT RtmpPCI_WriteSingleTxResource(IN PRTMP_ADAPTER pAd,
        RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA);
 
        RetTxIdx = TxIdx;
-       //
-       // Update Tx index
-       //
+       /* */
+       /* Update Tx index */
+       /* */
        INC_RING_INDEX(TxIdx, TX_RING_SIZE);
        pTxRing->TxCpuIdx = TxIdx;
 
@@ -171,9 +171,9 @@ USHORT RtmpPCI_WriteMultiTxResource(IN PRTMP_ADAPTER pAd,
 
        bIsLast = ((frameNum == (pTxBlk->TotalFrameNum - 1)) ? 1 : 0);
 
-       //
-       // get Tx Ring Resource
-       //
+       /* */
+       /* get Tx Ring Resource */
+       /* */
        pTxRing = &pAd->TxRing[pTxBlk->QueIdx];
        TxIdx = pAd->TxRing[pTxBlk->QueIdx].TxCpuIdx;
        pDMAHeaderBufVA = (PUCHAR) pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
@@ -181,20 +181,20 @@ USHORT RtmpPCI_WriteMultiTxResource(IN PRTMP_ADAPTER pAd,
            RTMP_GetPhysicalAddressLow(pTxRing->Cell[TxIdx].DmaBuf.AllocPa);
 
        if (frameNum == 0) {
-               // copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer
+               /* copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer */
                if (pTxBlk->TxFrameType == TX_AMSDU_FRAME)
-                       //hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen-LENGTH_AMSDU_SUBFRAMEHEAD, 4)+LENGTH_AMSDU_SUBFRAMEHEAD;
+                       /*hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen-LENGTH_AMSDU_SUBFRAMEHEAD, 4)+LENGTH_AMSDU_SUBFRAMEHEAD; */
                        hwHdrLen =
                            pTxBlk->MpduHeaderLen - LENGTH_AMSDU_SUBFRAMEHEAD +
                            pTxBlk->HdrPadLen + LENGTH_AMSDU_SUBFRAMEHEAD;
                else if (pTxBlk->TxFrameType == TX_RALINK_FRAME)
-                       //hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen-LENGTH_ARALINK_HEADER_FIELD, 4)+LENGTH_ARALINK_HEADER_FIELD;
+                       /*hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen-LENGTH_ARALINK_HEADER_FIELD, 4)+LENGTH_ARALINK_HEADER_FIELD; */
                        hwHdrLen =
                            pTxBlk->MpduHeaderLen -
                            LENGTH_ARALINK_HEADER_FIELD + pTxBlk->HdrPadLen +
                            LENGTH_ARALINK_HEADER_FIELD;
                else
-                       //hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4);
+                       /*hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4); */
                        hwHdrLen = pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen;
 
                firstDMALen = TXINFO_SIZE + TXWI_SIZE + hwHdrLen;
@@ -207,14 +207,14 @@ USHORT RtmpPCI_WriteMultiTxResource(IN PRTMP_ADAPTER pAd,
        pTxRing->Cell[TxIdx].pNdisPacket = pTxBlk->pPacket;
        pTxRing->Cell[TxIdx].pNextNdisPacket = NULL;
 
-       //
-       // build Tx Descriptor
-       //
+       /* */
+       /* build Tx Descriptor */
+       /* */
        pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
        NdisZeroMemory(pTxD, TXD_SIZE);
 
        pTxD->SDPtr0 = BufBasePaLow;
-       pTxD->SDLen0 = firstDMALen;     // include padding
+       pTxD->SDLen0 = firstDMALen;     /* include padding */
        pTxD->SDPtr1 = PCI_MAP_SINGLE(pAd, pTxBlk, 0, 1, PCI_DMA_TODEVICE);;
        pTxD->SDLen1 = pTxBlk->SrcBufLen;
        pTxD->LastSec0 = 0;
@@ -223,9 +223,9 @@ USHORT RtmpPCI_WriteMultiTxResource(IN PRTMP_ADAPTER pAd,
        RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA);
 
        RetTxIdx = TxIdx;
-       //
-       // Update Tx index
-       //
+       /* */
+       /* Update Tx index */
+       /* */
        INC_RING_INDEX(TxIdx, TX_RING_SIZE);
        pTxRing->TxCpuIdx = TxIdx;
 
@@ -243,9 +243,9 @@ VOID RtmpPCI_FinalWriteTxResource(IN PRTMP_ADAPTER pAd,
        PTXWI_STRUC pTxWI;
        PRTMP_TX_RING pTxRing;
 
-       //
-       // get Tx Ring Resource
-       //
+       /* */
+       /* get Tx Ring Resource */
+       /* */
        pTxRing = &pAd->TxRing[pTxBlk->QueIdx];
        pTxWI = (PTXWI_STRUC) pTxRing->Cell[FirstTxIdx].DmaBuf.AllocVa;
        pTxWI->MPDUtotalByteCount = totalMPDUSize;
@@ -258,14 +258,14 @@ VOID RtmpPCIDataLastTxIdx(IN PRTMP_ADAPTER pAd,
        PTXD_STRUC pTxD;
        PRTMP_TX_RING pTxRing;
 
-       //
-       // get Tx Ring Resource
-       //
+       /* */
+       /* get Tx Ring Resource */
+       /* */
        pTxRing = &pAd->TxRing[QueIdx];
 
-       //
-       // build Tx Descriptor
-       //
+       /* */
+       /* build Tx Descriptor */
+       /* */
        pTxD = (PTXD_STRUC) pTxRing->Cell[LastTxIdx].AllocVa;
 
        pTxD->LastSec1 = 1;
@@ -284,27 +284,27 @@ USHORT RtmpPCI_WriteFragTxResource(IN PRTMP_ADAPTER pAd,
        USHORT hwHeaderLen;
        UINT32 firstDMALen;
 
-       //
-       // Get Tx Ring Resource
-       //
+       /* */
+       /* Get Tx Ring Resource */
+       /* */
        pTxRing = &pAd->TxRing[pTxBlk->QueIdx];
        TxIdx = pAd->TxRing[pTxBlk->QueIdx].TxCpuIdx;
        pDMAHeaderBufVA = (PUCHAR) pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
        BufBasePaLow =
            RTMP_GetPhysicalAddressLow(pTxRing->Cell[TxIdx].DmaBuf.AllocPa);
 
-       //
-       // Copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer
-       //
-       //hwHeaderLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4);
+       /* */
+       /* Copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer */
+       /* */
+       /*hwHeaderLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4); */
        hwHeaderLen = pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen;
 
        firstDMALen = TXINFO_SIZE + TXWI_SIZE + hwHeaderLen;
        NdisMoveMemory(pDMAHeaderBufVA, pTxBlk->HeaderBuf, firstDMALen);
 
-       //
-       // Build Tx Descriptor
-       //
+       /* */
+       /* Build Tx Descriptor */
+       /* */
        pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
        NdisZeroMemory(pTxD, TXD_SIZE);
 
@@ -314,7 +314,7 @@ USHORT RtmpPCI_WriteFragTxResource(IN PRTMP_ADAPTER pAd,
        }
 
        pTxD->SDPtr0 = BufBasePaLow;
-       pTxD->SDLen0 = firstDMALen;     // include padding
+       pTxD->SDLen0 = firstDMALen;     /* include padding */
        pTxD->SDPtr1 = PCI_MAP_SINGLE(pAd, pTxBlk, 0, 1, PCI_DMA_TODEVICE);
        pTxD->SDLen1 = pTxBlk->SrcBufLen;
        pTxD->LastSec0 = 0;
@@ -325,9 +325,9 @@ USHORT RtmpPCI_WriteFragTxResource(IN PRTMP_ADAPTER pAd,
        RetTxIdx = TxIdx;
        pTxBlk->Priv += pTxBlk->SrcBufLen;
 
-       //
-       // Update Tx index
-       //
+       /* */
+       /* Update Tx index */
+       /* */
        INC_RING_INDEX(TxIdx, TX_RING_SIZE);
        pTxRing->TxCpuIdx = TxIdx;
 
@@ -363,7 +363,7 @@ int RtmpPCIMgmtKickOut(IN RTMP_ADAPTER * pAd,
            PCI_MAP_SINGLE(pAd, pSrcBufVA, SrcBufLen, 0, PCI_DMA_TODEVICE);
        pTxD->SDLen0 = SrcBufLen;
 
-//==================================================================
+/*================================================================== */
 /*     DBGPRINT_RAW(RT_DEBUG_TRACE, ("MLMEHardTransmit\n"));
        for (i = 0; i < (TXWI_SIZE+24); i++)
        {
@@ -375,12 +375,12 @@ int RtmpPCIMgmtKickOut(IN RTMP_ADAPTER * pAd,
                        DBGPRINT_RAW(RT_DEBUG_TRACE, ("\n      "));
        }
        DBGPRINT_RAW(RT_DEBUG_TRACE, ("\n      "));*/
-//=======================================================================
+/*======================================================================= */
 
        pAd->RalinkCounters.KickTxCount++;
        pAd->RalinkCounters.OneSecTxDoneCount++;
 
-       // Increase TX_CTX_IDX, but write to register later.
+       /* Increase TX_CTX_IDX, but write to register later. */
        INC_RING_INDEX(pAd->MgmtRing.TxCpuIdx, MGMT_RING_SIZE);
 
        RTMP_IO_WRITE32(pAd, TX_MGMTCTX_IDX, pAd->MgmtRing.TxCpuIdx);
@@ -412,9 +412,9 @@ NDIS_STATUS RTMPCheckRxError(IN PRTMP_ADAPTER pAd,
        PCIPHER_KEY pWpaKey;
        INT dBm;
 
-       // Phy errors & CRC errors
+       /* Phy errors & CRC errors */
        if ( /*(pRxD->PhyErr) || */ (pRxD->Crc)) {
-               // Check RSSI for Noise Hist statistic collection.
+               /* Check RSSI for Noise Hist statistic collection. */
                dBm = (INT) (pRxWI->RSSI0) - pAd->BbpRssiToDbmDelta;
                if (dBm <= -87)
                        pAd->StaCfg.RPIDensity[0] += 1;
@@ -435,21 +435,21 @@ NDIS_STATUS RTMPCheckRxError(IN PRTMP_ADAPTER pAd,
 
                return (NDIS_STATUS_FAILURE);
        }
-       // Add Rx size to channel load counter, we should ignore error counts
+       /* Add Rx size to channel load counter, we should ignore error counts */
        pAd->StaCfg.CLBusyBytes += (pRxD->SDL0 + 14);
 
-       // Drop ToDs promiscous frame, it is opened due to CCX 2 channel load statistics
+       /* Drop ToDs promiscous frame, it is opened due to CCX 2 channel load statistics */
        if (pHeader != NULL) {
                if (pHeader->FC.ToDs) {
                        return (NDIS_STATUS_FAILURE);
                }
        }
-       // Drop not U2M frames, cant's drop here because we will drop beacon in this case
-       // I am kind of doubting the U2M bit operation
-       // if (pRxD->U2M == 0)
-       //      return(NDIS_STATUS_FAILURE);
+       /* Drop not U2M frames, cant's drop here because we will drop beacon in this case */
+       /* I am kind of doubting the U2M bit operation */
+       /* if (pRxD->U2M == 0) */
+       /*      return(NDIS_STATUS_FAILURE); */
 
-       // drop decyption fail frame
+       /* drop decyption fail frame */
        if (pRxD->CipherErr) {
                if (pRxD->CipherErr == 2) {
                        DBGPRINT_RAW(RT_DEBUG_TRACE,
@@ -471,12 +471,12 @@ NDIS_STATUS RTMPCheckRxError(IN PRTMP_ADAPTER pAd,
                              pRxD->CipherErr, pRxD->SDL0,
                              pRxD->Mcast | pRxD->Bcast, pRxD->MyBss,
                              pRxWI->WirelessCliID,
-//                      CipherName[pRxD->CipherAlg],
+/*                      CipherName[pRxD->CipherAlg], */
                              pRxWI->KeyIndex));
 
-               //
-               // MIC Error
-               //
+               /* */
+               /* MIC Error */
+               /* */
                if (pRxD->CipherErr == 2) {
                        pWpaKey = &pAd->SharedKey[BSS0][pRxWI->KeyIndex];
                        if (pAd->StaCfg.WpaSupplicantUP)
@@ -523,7 +523,7 @@ BOOLEAN RTMPFreeTXDUponTxDmaDone(IN PRTMP_ADAPTER pAd, IN UCHAR QueIdx)
        PNDIS_PACKET pPacket;
        UCHAR FREE = 0;
        TXD_STRUC TxD, *pOriTxD;
-       //ULONG         IrqFlags;
+       /*ULONG         IrqFlags; */
        BOOLEAN bReschedule = FALSE;
 
        ASSERT(QueIdx < NUM_OF_TX_RING);
@@ -532,10 +532,10 @@ BOOLEAN RTMPFreeTXDUponTxDmaDone(IN PRTMP_ADAPTER pAd, IN UCHAR QueIdx)
        RTMP_IO_READ32(pAd, TX_DTX_IDX0 + QueIdx * RINGREG_DIFF,
                       &pTxRing->TxDmaIdx);
        while (pTxRing->TxSwFreeIdx != pTxRing->TxDmaIdx) {
-//              RTMP_IRQ_LOCK(&pAd->irq_lock, IrqFlags);
+/*              RTMP_IRQ_LOCK(&pAd->irq_lock, IrqFlags); */
 
-               // static rate also need NICUpdateFifoStaCounters() function.
-               //if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED))
+               /* static rate also need NICUpdateFifoStaCounters() function. */
+               /*if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED)) */
                NICUpdateFifoStaCounters(pAd);
 
                /* Note : If (pAd->ate.bQATxStart == TRUE), we will never reach here. */
@@ -558,7 +558,7 @@ BOOLEAN RTMPFreeTXDUponTxDmaDone(IN PRTMP_ADAPTER pAd, IN UCHAR QueIdx)
                                RELEASE_NDIS_PACKET(pAd, pPacket,
                                                    NDIS_STATUS_SUCCESS);
                        }
-                       //Always assign pNdisPacket as NULL after clear
+                       /*Always assign pNdisPacket as NULL after clear */
                        pTxRing->Cell[pTxRing->TxSwFreeIdx].pNdisPacket = NULL;
 
                        pPacket =
@@ -572,7 +572,7 @@ BOOLEAN RTMPFreeTXDUponTxDmaDone(IN PRTMP_ADAPTER pAd, IN UCHAR QueIdx)
                                RELEASE_NDIS_PACKET(pAd, pPacket,
                                                    NDIS_STATUS_SUCCESS);
                        }
-                       //Always assign pNextNdisPacket as NULL after clear
+                       /*Always assign pNextNdisPacket as NULL after clear */
                        pTxRing->Cell[pTxRing->TxSwFreeIdx].pNextNdisPacket =
                            NULL;
                }
@@ -586,7 +586,7 @@ BOOLEAN RTMPFreeTXDUponTxDmaDone(IN PRTMP_ADAPTER pAd, IN UCHAR QueIdx)
                               &pTxRing->TxDmaIdx);
                NdisMoveMemory(pOriTxD, pTxD, sizeof(TXD_STRUC));
 
-//         RTMP_IRQ_UNLOCK(&pAd->irq_lock, IrqFlags);
+/*         RTMP_IRQ_UNLOCK(&pAd->irq_lock, IrqFlags); */
        }
 
        return bReschedule;
@@ -612,12 +612,12 @@ BOOLEAN RTMPFreeTXDUponTxDmaDone(IN PRTMP_ADAPTER pAd, IN UCHAR QueIdx)
 BOOLEAN RTMPHandleTxRingDmaDoneInterrupt(IN PRTMP_ADAPTER pAd,
                                         IN INT_SOURCE_CSR_STRUC TxRingBitmap)
 {
-//      UCHAR                   Count = 0;
+/*      UCHAR                   Count = 0; */
        unsigned long IrqFlags;
        BOOLEAN bReschedule = FALSE;
 
-       // Make sure Tx ring resource won't be used by other threads
-       //NdisAcquireSpinLock(&pAd->TxRingLock);
+       /* Make sure Tx ring resource won't be used by other threads */
+       /*NdisAcquireSpinLock(&pAd->TxRingLock); */
 
        RTMP_IRQ_LOCK(&pAd->irq_lock, IrqFlags);
 
@@ -633,11 +633,11 @@ BOOLEAN RTMPHandleTxRingDmaDoneInterrupt(IN PRTMP_ADAPTER pAd,
        if (TxRingBitmap.field.Ac1DmaDone)
                bReschedule |= RTMPFreeTXDUponTxDmaDone(pAd, QID_AC_BK);
 
-       // Make sure to release Tx ring resource
-       //NdisReleaseSpinLock(&pAd->TxRingLock);
+       /* Make sure to release Tx ring resource */
+       /*NdisReleaseSpinLock(&pAd->TxRingLock); */
        RTMP_IRQ_UNLOCK(&pAd->irq_lock, IrqFlags);
 
-       // Dequeue outgoing frames from TxSwQueue[] and process it
+       /* Dequeue outgoing frames from TxSwQueue[] and process it */
        RTMPDeQueuePacket(pAd, FALSE, NUM_OF_TX_RING, MAX_TX_PROCESS);
 
        return bReschedule;
@@ -665,7 +665,7 @@ VOID RTMPHandleMgmtRingDmaDoneInterrupt(IN PRTMP_ADAPTER pAd)
 {
        PTXD_STRUC pTxD;
        PNDIS_PACKET pPacket;
-//      int              i;
+/*      int              i; */
        UCHAR FREE = 0;
        PRTMP_MGMT_RING pMgmtRing = &pAd->MgmtRing;
 
@@ -789,15 +789,15 @@ PNDIS_PACKET GetPacketFromRxRing(IN PRTMP_ADAPTER pAd,
        RTMP_SEM_LOCK(&pAd->RxRingLock);
 
        if (*pRxPending == 0) {
-               // Get how may packets had been received
+               /* Get how may packets had been received */
                RTMP_IO_READ32(pAd, RX_DRX_IDX, &pAd->RxRing.RxDmaIdx);
 
                if (pAd->RxRing.RxSwReadIdx == pAd->RxRing.RxDmaIdx) {
-                       // no more rx packets
+                       /* no more rx packets */
                        bReschedule = FALSE;
                        goto done;
                }
-               // get rx pending count
+               /* get rx pending count */
                if (pAd->RxRing.RxDmaIdx > pAd->RxRing.RxSwReadIdx)
                        *pRxPending =
                            pAd->RxRing.RxDmaIdx - pAd->RxRing.RxSwReadIdx;
@@ -810,17 +810,17 @@ PNDIS_PACKET GetPacketFromRxRing(IN PRTMP_ADAPTER pAd,
 
        pRxCell = &pAd->RxRing.Cell[pAd->RxRing.RxSwReadIdx];
 
-       // Point to Rx indexed rx ring descriptor
+       /* Point to Rx indexed rx ring descriptor */
        pRxD = (PRXD_STRUC) pRxCell->AllocVa;
 
        if (pRxD->DDONE == 0) {
                *pRxPending = 0;
-               // DMAIndx had done but DDONE bit not ready
+               /* DMAIndx had done but DDONE bit not ready */
                bReschedule = TRUE;
                goto done;
        }
 
-       // return rx descriptor
+       /* return rx descriptor */
        NdisMoveMemory(pSaveRxD, pRxD, RXD_SIZE);
 
        pNewPacket =
@@ -828,7 +828,7 @@ PNDIS_PACKET GetPacketFromRxRing(IN PRTMP_ADAPTER pAd,
                                        &AllocVa, &AllocPa);
 
        if (pNewPacket) {
-               // unmap the rx buffer
+               /* unmap the rx buffer */
                PCI_UNMAP_SINGLE(pAd, pRxCell->DmaBuf.AllocPa,
                                 pRxCell->DmaBuf.AllocSize, PCI_DMA_FROMDEVICE);
                pRxPacket = pRxCell->pNdisPacket;
@@ -840,17 +840,17 @@ PNDIS_PACKET GetPacketFromRxRing(IN PRTMP_ADAPTER pAd,
                /* update SDP0 to new buffer of rx packet */
                pRxD->SDP0 = AllocPa;
        } else {
-               //DBGPRINT(RT_DEBUG_TRACE,("No Rx Buffer\n"));
+               /*DBGPRINT(RT_DEBUG_TRACE,("No Rx Buffer\n")); */
                pRxPacket = NULL;
                bReschedule = TRUE;
        }
 
        pRxD->DDONE = 0;
 
-       // had handled one rx packet
+       /* had handled one rx packet */
        *pRxPending = *pRxPending - 1;
 
-       // update rx descriptor and kick rx
+       /* update rx descriptor and kick rx */
        INC_RING_INDEX(pAd->RxRing.RxSwReadIdx, RX_RING_SIZE);
 
        pAd->RxRing.RxCpuIdx =
@@ -874,28 +874,28 @@ NDIS_STATUS MlmeHardTransmitTxRing(IN PRTMP_ADAPTER pAd,
        PHEADER_802_11 pHeader_802_11;
        BOOLEAN bAckRequired, bInsertTimestamp;
        ULONG SrcBufPA;
-       //UCHAR                 TxBufIdx;
+       /*UCHAR                 TxBufIdx; */
        UCHAR MlmeRate;
        ULONG SwIdx = pAd->TxRing[QueIdx].TxCpuIdx;
        PTXWI_STRUC pFirstTxWI;
-       //ULONG i;
-       //HTTRANSMIT_SETTING    MlmeTransmit;   //Rate for this MGMT frame.
+       /*ULONG i; */
+       /*HTTRANSMIT_SETTING    MlmeTransmit;   //Rate for this MGMT frame. */
        ULONG FreeNum;
        MAC_TABLE_ENTRY *pMacEntry = NULL;
 
        RTMP_QueryPacketInfo(pPacket, &PacketInfo, &pSrcBufVA, &SrcBufLen);
 
        if (pSrcBufVA == NULL) {
-               // The buffer shouldn't be NULL
+               /* The buffer shouldn't be NULL */
                return NDIS_STATUS_FAILURE;
        }
-       // Make sure MGMT ring resource won't be used by other threads
-       //NdisAcquireSpinLock(&pAd->TxRingLock);
+       /* Make sure MGMT ring resource won't be used by other threads */
+       /*NdisAcquireSpinLock(&pAd->TxRingLock); */
 
        FreeNum = GET_TXRING_FREENO(pAd, QueIdx);
 
        if (FreeNum == 0) {
-               //NdisReleaseSpinLock(&pAd->TxRingLock);
+               /*NdisReleaseSpinLock(&pAd->TxRingLock); */
                return NDIS_STATUS_FAILURE;
        }
 
@@ -905,13 +905,13 @@ NDIS_STATUS MlmeHardTransmitTxRing(IN PRTMP_ADAPTER pAd,
 
        if (pAd->TxRing[QueIdx].Cell[SwIdx].pNdisPacket) {
                DBGPRINT(RT_DEBUG_OFF, ("MlmeHardTransmit Error\n"));
-               //NdisReleaseSpinLock(&pAd->TxRingLock);
+               /*NdisReleaseSpinLock(&pAd->TxRingLock); */
                return NDIS_STATUS_FAILURE;
        }
 
        {
-               // outgoing frame always wakeup PHY to prevent frame lost
-               // if (pAd->StaCfg.Psm == PWR_SAVE)
+               /* outgoing frame always wakeup PHY to prevent frame lost */
+               /* if (pAd->StaCfg.Psm == PWR_SAVE) */
                if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
                        AsicForceWakeup(pAd, TRUE);
        }
@@ -928,18 +928,18 @@ NDIS_STATUS MlmeHardTransmitTxRing(IN PRTMP_ADAPTER pAd,
            (pHeader_802_11->FC.SubType == SUBTYPE_QOS_NULL)) {
                pMacEntry = MacTableLookup(pAd, pHeader_802_11->Addr1);
        }
-       // Verify Mlme rate for a / g bands.
-       if ((pAd->LatchRfRegs.Channel > 14) && (MlmeRate < RATE_6))     // 11A band
+       /* Verify Mlme rate for a / g bands. */
+       if ((pAd->LatchRfRegs.Channel > 14) && (MlmeRate < RATE_6))     /* 11A band */
                MlmeRate = RATE_6;
 
-       //
-       // Should not be hard code to set PwrMgmt to 0 (PWR_ACTIVE)
-       // Snice it's been set to 0 while on MgtMacHeaderInit
-       // By the way this will cause frame to be send on PWR_SAVE failed.
-       //
-       //
-       // In WMM-UAPSD, mlme frame should be set psm as power saving but probe request frame
-       // Data-Null packets alse pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD
+       /* */
+       /* Should not be hard code to set PwrMgmt to 0 (PWR_ACTIVE) */
+       /* Snice it's been set to 0 while on MgtMacHeaderInit */
+       /* By the way this will cause frame to be send on PWR_SAVE failed. */
+       /* */
+       /* */
+       /* In WMM-UAPSD, mlme frame should be set psm as power saving but probe request frame */
+       /* Data-Null packets alse pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD */
        if (pHeader_802_11->FC.Type != BTYPE_DATA) {
                if ((pHeader_802_11->FC.SubType == SUBTYPE_PROBE_REQ)
                    || !(pAd->CommonCfg.bAPSDCapable
@@ -952,12 +952,12 @@ NDIS_STATUS MlmeHardTransmitTxRing(IN PRTMP_ADAPTER pAd,
        }
 
        bInsertTimestamp = FALSE;
-       if (pHeader_802_11->FC.Type == BTYPE_CNTL)      // must be PS-POLL
+       if (pHeader_802_11->FC.Type == BTYPE_CNTL)      /* must be PS-POLL */
        {
                bAckRequired = FALSE;
-       } else                  // BTYPE_MGMT or BTYPE_DATA(must be NULL frame)
+       } else                  /* BTYPE_MGMT or BTYPE_DATA(must be NULL frame) */
        {
-               if (pHeader_802_11->Addr1[0] & 0x01)    // MULTICAST, BROADCAST
+               if (pHeader_802_11->Addr1[0] & 0x01)    /* MULTICAST, BROADCAST */
                {
                        bAckRequired = FALSE;
                        pHeader_802_11->Duration = 0;
@@ -973,29 +973,29 @@ NDIS_STATUS MlmeHardTransmitTxRing(IN PRTMP_ADAPTER pAd,
        pHeader_802_11->Sequence = pAd->Sequence++;
        if (pAd->Sequence > 0xfff)
                pAd->Sequence = 0;
-       // Before radar detection done, mgmt frame can not be sent but probe req
-       // Because we need to use probe req to trigger driver to send probe req in passive scan
+       /* Before radar detection done, mgmt frame can not be sent but probe req */
+       /* Because we need to use probe req to trigger driver to send probe req in passive scan */
        if ((pHeader_802_11->FC.SubType != SUBTYPE_PROBE_REQ)
            && (pAd->CommonCfg.bIEEE80211H == 1)
            && (pAd->CommonCfg.RadarDetect.RDMode != RD_NORMAL_MODE)) {
                DBGPRINT(RT_DEBUG_ERROR,
                         ("MlmeHardTransmit --> radar detect not in normal mode !!!\n"));
-               //NdisReleaseSpinLock(&pAd->TxRingLock);
+               /*NdisReleaseSpinLock(&pAd->TxRingLock); */
                return (NDIS_STATUS_FAILURE);
        }
-       //
-       // fill scatter-and-gather buffer list into TXD. Internally created NDIS PACKET
-       // should always has only one ohysical buffer, and the whole frame size equals
-       // to the first scatter buffer size
-       //
-
-       // Initialize TX Descriptor
-       // For inter-frame gap, the number is for this frame and next frame
-       // For MLME rate, we will fix as 2Mb to match other vendor's implement
-//      pAd->CommonCfg.MlmeTransmit.field.MODE = 1;
-
-// management frame doesn't need encryption. so use RESERVED_WCID no matter u are sending to specific wcid or not.
-       // Only beacon use Nseq=TRUE. So here we use Nseq=FALSE.
+       /* */
+       /* fill scatter-and-gather buffer list into TXD. Internally created NDIS PACKET */
+       /* should always has only one ohysical buffer, and the whole frame size equals */
+       /* to the first scatter buffer size */
+       /* */
+
+       /* Initialize TX Descriptor */
+       /* For inter-frame gap, the number is for this frame and next frame */
+       /* For MLME rate, we will fix as 2Mb to match other vendor's implement */
+/*      pAd->CommonCfg.MlmeTransmit.field.MODE = 1; */
+
+/* management frame doesn't need encryption. so use RESERVED_WCID no matter u are sending to specific wcid or not. */
+       /* Only beacon use Nseq=TRUE. So here we use Nseq=FALSE. */
        if (pMacEntry == NULL) {
                RTMPWriteTxWI(pAd, pFirstTxWI, FALSE, FALSE, bInsertTimestamp,
                              FALSE, bAckRequired, FALSE, 0, RESERVED_WCID,
@@ -1013,7 +1013,7 @@ NDIS_STATUS MlmeHardTransmitTxRing(IN PRTMP_ADAPTER pAd,
 
        pAd->TxRing[QueIdx].Cell[SwIdx].pNdisPacket = pPacket;
        pAd->TxRing[QueIdx].Cell[SwIdx].pNextNdisPacket = NULL;
-//      pFirstTxWI->MPDUtotalByteCount = SrcBufLen - TXWI_SIZE;
+/*      pFirstTxWI->MPDUtotalByteCount = SrcBufLen - TXWI_SIZE; */
        SrcBufPA =
            PCI_MAP_SINGLE(pAd, pSrcBufVA, SrcBufLen, 0, PCI_DMA_TODEVICE);
 
@@ -1028,14 +1028,14 @@ NDIS_STATUS MlmeHardTransmitTxRing(IN PRTMP_ADAPTER pAd,
        pAd->RalinkCounters.KickTxCount++;
        pAd->RalinkCounters.OneSecTxDoneCount++;
 
-       // Increase TX_CTX_IDX, but write to register later.
+       /* Increase TX_CTX_IDX, but write to register later. */
        INC_RING_INDEX(pAd->TxRing[QueIdx].TxCpuIdx, TX_RING_SIZE);
 
        RTMP_IO_WRITE32(pAd, TX_CTX_IDX0 + QueIdx * 0x10,
                        pAd->TxRing[QueIdx].TxCpuIdx);
 
-       // Make sure to release MGMT ring resource
-//      NdisReleaseSpinLock(&pAd->TxRingLock);
+       /* Make sure to release MGMT ring resource */
+/*      NdisReleaseSpinLock(&pAd->TxRingLock); */
 
        return NDIS_STATUS_SUCCESS;
 }
@@ -1082,15 +1082,15 @@ VOID RTMPWriteTxDescriptor(IN PRTMP_ADAPTER pAd,
                           IN PTXD_STRUC pTxD,
                           IN BOOLEAN bWIV, IN UCHAR QueueSEL)
 {
-       //
-       // Always use Long preamble before verifiation short preamble functionality works well.
-       // Todo: remove the following line if short preamble functionality works
-       //
+       /* */
+       /* Always use Long preamble before verifiation short preamble functionality works well. */
+       /* Todo: remove the following line if short preamble functionality works */
+       /* */
        OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);
 
        pTxD->WIV = (bWIV) ? 1 : 0;
        pTxD->QSEL = (QueueSEL);
-       //RT2860c??  fixed using EDCA queue for test...  We doubt Queue1 has problem.  2006-09-26 Jan
-       //pTxD->QSEL= FIFO_EDCA;
+       /*RT2860c??  fixed using EDCA queue for test...  We doubt Queue1 has problem.  2006-09-26 Jan */
+       /*pTxD->QSEL= FIFO_EDCA; */
        pTxD->DMADONE = 0;
 }
index fbcb3a3..da79fc0 100644 (file)
@@ -73,7 +73,7 @@ USHORT RtmpUSB_WriteSubTxResource(IN PRTMP_ADAPTER pAd,
                                  IN BOOLEAN bIsLast, OUT USHORT * FreeNumber)
 {
 
-       // Dummy function. Should be removed in the future.
+       /* Dummy function. Should be removed in the future. */
        return 0;
 
 }
@@ -83,7 +83,7 @@ USHORT RtmpUSB_WriteFragTxResource(IN PRTMP_ADAPTER pAd,
                                   IN UCHAR fragNum, OUT USHORT * FreeNumber)
 {
        HT_TX_CONTEXT *pHTTXContext;
-       USHORT hwHdrLen;        // The hwHdrLen consist of 802.11 header length plus the header padding length.
+       USHORT hwHdrLen;        /* The hwHdrLen consist of 802.11 header length plus the header padding length. */
        UINT32 fillOffset;
        TXINFO_STRUC *pTxInfo;
        TXWI_STRUC *pTxWI;
@@ -94,9 +94,9 @@ USHORT RtmpUSB_WriteFragTxResource(IN PRTMP_ADAPTER pAd,
        UINT32 USBDMApktLen = 0, DMAHdrLen, padding;
        BOOLEAN TxQLastRound = FALSE;
 
-       //
-       // get Tx Ring Resource & Dma Buffer address
-       //
+       /* */
+       /* get Tx Ring Resource & Dma Buffer address */
+       /* */
        QueIdx = pTxBlk->QueIdx;
        pHTTXContext = &pAd->TxContext[QueIdx];
 
@@ -106,12 +106,12 @@ USHORT RtmpUSB_WriteFragTxResource(IN PRTMP_ADAPTER pAd,
        fillOffset = pHTTXContext->CurWritePosition;
 
        if (fragNum == 0) {
-               // Check if we have enough space for this bulk-out batch.
+               /* Check if we have enough space for this bulk-out batch. */
                Status = RtmpUSBCanDoWrite(pAd, QueIdx, pHTTXContext);
                if (Status == NDIS_STATUS_SUCCESS) {
                        pHTTXContext->bCurWriting = TRUE;
 
-                       // Reserve space for 8 bytes padding.
+                       /* Reserve space for 8 bytes padding. */
                        if ((pHTTXContext->ENextBulkOutPosition ==
                             pHTTXContext->CurWritePosition)) {
                                pHTTXContext->ENextBulkOutPosition += 8;
@@ -130,7 +130,7 @@ USHORT RtmpUSB_WriteFragTxResource(IN PRTMP_ADAPTER pAd,
                        return (Status);
                }
        } else {
-               // For sub-sequent frames of this bulk-out batch. Just copy it to our bulk-out buffer.
+               /* For sub-sequent frames of this bulk-out batch. Just copy it to our bulk-out buffer. */
                Status =
                    ((pHTTXContext->bCurWriting ==
                      TRUE) ? NDIS_STATUS_SUCCESS : NDIS_STATUS_FAILURE);
@@ -153,19 +153,19 @@ USHORT RtmpUSB_WriteFragTxResource(IN PRTMP_ADAPTER pAd,
        pWirelessPacket =
            &pHTTXContext->TransferBuffer->field.WirelessPacket[fillOffset];
 
-       // copy TXWI + WLAN Header + LLC into DMA Header Buffer
-       //hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4);
+       /* copy TXWI + WLAN Header + LLC into DMA Header Buffer */
+       /*hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4); */
        hwHdrLen = pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen;
 
-       // Build our URB for USBD
+       /* Build our URB for USBD */
        DMAHdrLen = TXWI_SIZE + hwHdrLen;
        USBDMApktLen = DMAHdrLen + pTxBlk->SrcBufLen;
-       padding = (4 - (USBDMApktLen % 4)) & 0x03;      // round up to 4 byte alignment
+       padding = (4 - (USBDMApktLen % 4)) & 0x03;      /* round up to 4 byte alignment */
        USBDMApktLen += padding;
 
        pTxBlk->Priv += (TXINFO_SIZE + USBDMApktLen);
 
-       // For TxInfo, the length of USBDMApktLen = TXWI_SIZE + 802.11 header + payload
+       /* For TxInfo, the length of USBDMApktLen = TXWI_SIZE + 802.11 header + payload */
        RTMPWriteTxInfo(pAd, pTxInfo, (USHORT) (USBDMApktLen), FALSE, FIFO_EDCA,
                        FALSE /*NextValid */ , FALSE);
 
@@ -189,25 +189,25 @@ USHORT RtmpUSB_WriteFragTxResource(IN PRTMP_ADAPTER pAd,
 
        NdisMoveMemory(pWirelessPacket, pTxBlk->pSrcBufData, pTxBlk->SrcBufLen);
 
-       //      Zero the last padding.
+       /*      Zero the last padding. */
        pWirelessPacket += pTxBlk->SrcBufLen;
        NdisZeroMemory(pWirelessPacket, padding + 8);
 
        if (fragNum == pTxBlk->TotalFragNum) {
                RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
 
-               // Update the pHTTXContext->CurWritePosition. 3906 used to prevent the NextBulkOut is a A-RALINK/A-MSDU Frame.
+               /* Update the pHTTXContext->CurWritePosition. 3906 used to prevent the NextBulkOut is a A-RALINK/A-MSDU Frame. */
                pHTTXContext->CurWritePosition += pTxBlk->Priv;
                if (TxQLastRound == TRUE)
                        pHTTXContext->CurWritePosition = 8;
                pHTTXContext->CurWriteRealPos = pHTTXContext->CurWritePosition;
 
-               // Finally, set bCurWriting as FALSE
+               /* Finally, set bCurWriting as FALSE */
                pHTTXContext->bCurWriting = FALSE;
 
                RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
 
-               // succeed and release the skb buffer
+               /* succeed and release the skb buffer */
                RELEASE_NDIS_PACKET(pAd, pTxBlk->pPacket, NDIS_STATUS_SUCCESS);
        }
 
@@ -232,19 +232,19 @@ USHORT RtmpUSB_WriteSingleTxResource(IN PRTMP_ADAPTER pAd,
        UINT32 USBDMApktLen = 0, DMAHdrLen, padding;
        BOOLEAN bTxQLastRound = FALSE;
 
-       // For USB, didn't need PCI_MAP_SINGLE()
-       //SrcBufPA = PCI_MAP_SINGLE(pAd, (char *) pTxBlk->pSrcBufData, pTxBlk->SrcBufLen, PCI_DMA_TODEVICE);
+       /* For USB, didn't need PCI_MAP_SINGLE() */
+       /*SrcBufPA = PCI_MAP_SINGLE(pAd, (char *) pTxBlk->pSrcBufData, pTxBlk->SrcBufLen, PCI_DMA_TODEVICE); */
 
-       //
-       // get Tx Ring Resource & Dma Buffer address
-       //
+       /* */
+       /* get Tx Ring Resource & Dma Buffer address */
+       /* */
        QueIdx = pTxBlk->QueIdx;
 
        RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
        pHTTXContext = &pAd->TxContext[QueIdx];
        fillOffset = pHTTXContext->CurWritePosition;
 
-       // Check ring full.
+       /* Check ring full. */
        Status = RtmpUSBCanDoWrite(pAd, QueIdx, pHTTXContext);
        if (Status == NDIS_STATUS_SUCCESS) {
                pHTTXContext->bCurWriting = TRUE;
@@ -252,7 +252,7 @@ USHORT RtmpUSB_WriteSingleTxResource(IN PRTMP_ADAPTER pAd,
                pTxInfo = (PTXINFO_STRUC) (&pTxBlk->HeaderBuf[0]);
                pTxWI = (PTXWI_STRUC) (&pTxBlk->HeaderBuf[TXINFO_SIZE]);
 
-               // Reserve space for 8 bytes padding.
+               /* Reserve space for 8 bytes padding. */
                if ((pHTTXContext->ENextBulkOutPosition ==
                     pHTTXContext->CurWritePosition)) {
                        pHTTXContext->ENextBulkOutPosition += 8;
@@ -265,19 +265,19 @@ USHORT RtmpUSB_WriteSingleTxResource(IN PRTMP_ADAPTER pAd,
                    &pHTTXContext->TransferBuffer->field.
                    WirelessPacket[fillOffset];
 
-               // copy TXWI + WLAN Header + LLC into DMA Header Buffer
-               //hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4);
+               /* copy TXWI + WLAN Header + LLC into DMA Header Buffer */
+               /*hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4); */
                hwHdrLen = pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen;
 
-               // Build our URB for USBD
+               /* Build our URB for USBD */
                DMAHdrLen = TXWI_SIZE + hwHdrLen;
                USBDMApktLen = DMAHdrLen + pTxBlk->SrcBufLen;
-               padding = (4 - (USBDMApktLen % 4)) & 0x03;      // round up to 4 byte alignment
+               padding = (4 - (USBDMApktLen % 4)) & 0x03;      /* round up to 4 byte alignment */
                USBDMApktLen += padding;
 
                pTxBlk->Priv = (TXINFO_SIZE + USBDMApktLen);
 
-               // For TxInfo, the length of USBDMApktLen = TXWI_SIZE + 802.11 header + payload
+               /* For TxInfo, the length of USBDMApktLen = TXWI_SIZE + 802.11 header + payload */
                RTMPWriteTxInfo(pAd, pTxInfo, (USHORT) (USBDMApktLen), FALSE,
                                FIFO_EDCA, FALSE /*NextValid */ , FALSE);
 
@@ -290,16 +290,16 @@ USHORT RtmpUSB_WriteSingleTxResource(IN PRTMP_ADAPTER pAd,
                               TXINFO_SIZE + TXWI_SIZE + hwHdrLen);
                pWirelessPacket += (TXINFO_SIZE + TXWI_SIZE + hwHdrLen);
 
-               // We unlock it here to prevent the first 8 bytes maybe over-writed issue.
-               //      1. First we got CurWritePosition but the first 8 bytes still not write to the pTxcontext.
-               //      2. An interrupt break our routine and handle bulk-out complete.
-               //      3. In the bulk-out compllete, it need to do another bulk-out,
-               //                      if the ENextBulkOutPosition is just the same as CurWritePosition, it will save the first 8 bytes from CurWritePosition,
-               //                      but the payload still not copyed. the pTxContext->SavedPad[] will save as allzero. and set the bCopyPad = TRUE.
-               //      4. Interrupt complete.
-               //  5. Our interrupted routine go back and fill the first 8 bytes to pTxContext.
-               //      6. Next time when do bulk-out, it found the bCopyPad==TRUE and will copy the SavedPad[] to pTxContext->NextBulkOutPosition.
-               //              and the packet will wrong.
+               /* We unlock it here to prevent the first 8 bytes maybe over-writed issue. */
+               /*      1. First we got CurWritePosition but the first 8 bytes still not write to the pTxcontext. */
+               /*      2. An interrupt break our routine and handle bulk-out complete. */
+               /*      3. In the bulk-out compllete, it need to do another bulk-out, */
+               /*                      if the ENextBulkOutPosition is just the same as CurWritePosition, it will save the first 8 bytes from CurWritePosition, */
+               /*                      but the payload still not copyed. the pTxContext->SavedPad[] will save as allzero. and set the bCopyPad = TRUE. */
+               /*      4. Interrupt complete. */
+               /*  5. Our interrupted routine go back and fill the first 8 bytes to pTxContext. */
+               /*      6. Next time when do bulk-out, it found the bCopyPad==TRUE and will copy the SavedPad[] to pTxContext->NextBulkOutPosition. */
+               /*              and the packet will wrong. */
                pHTTXContext->CurWriteRealPos +=
                    (TXINFO_SIZE + TXWI_SIZE + hwHdrLen);
                RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
@@ -321,7 +321,7 @@ USHORT RtmpUSB_WriteSingleTxResource(IN PRTMP_ADAPTER pAd,
 
        RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
 
-       // succeed and release the skb buffer
+       /* succeed and release the skb buffer */
        RELEASE_NDIS_PACKET(pAd, pTxBlk->pPacket, NDIS_STATUS_SUCCESS);
 
        return (Status);
@@ -333,7 +333,7 @@ USHORT RtmpUSB_WriteMultiTxResource(IN PRTMP_ADAPTER pAd,
                                    IN UCHAR frameNum, OUT USHORT * FreeNumber)
 {
        HT_TX_CONTEXT *pHTTXContext;
-       USHORT hwHdrLen;        // The hwHdrLen consist of 802.11 header length plus the header padding length.
+       USHORT hwHdrLen;        /* The hwHdrLen consist of 802.11 header length plus the header padding length. */
        UINT32 fillOffset;
        TXINFO_STRUC *pTxInfo;
        TXWI_STRUC *pTxWI;
@@ -341,18 +341,18 @@ USHORT RtmpUSB_WriteMultiTxResource(IN PRTMP_ADAPTER pAd,
        UCHAR QueIdx;
        NDIS_STATUS Status;
        unsigned long IrqFlags;
-       //UINT32                        USBDMApktLen = 0, DMAHdrLen, padding;
+       /*UINT32                        USBDMApktLen = 0, DMAHdrLen, padding; */
 
-       //
-       // get Tx Ring Resource & Dma Buffer address
-       //
+       /* */
+       /* get Tx Ring Resource & Dma Buffer address */
+       /* */
        QueIdx = pTxBlk->QueIdx;
        pHTTXContext = &pAd->TxContext[QueIdx];
 
        RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
 
        if (frameNum == 0) {
-               // Check if we have enough space for this bulk-out batch.
+               /* Check if we have enough space for this bulk-out batch. */
                Status = RtmpUSBCanDoWrite(pAd, QueIdx, pHTTXContext);
                if (Status == NDIS_STATUS_SUCCESS) {
                        pHTTXContext->bCurWriting = TRUE;
@@ -360,7 +360,7 @@ USHORT RtmpUSB_WriteMultiTxResource(IN PRTMP_ADAPTER pAd,
                        pTxInfo = (PTXINFO_STRUC) (&pTxBlk->HeaderBuf[0]);
                        pTxWI = (PTXWI_STRUC) (&pTxBlk->HeaderBuf[TXINFO_SIZE]);
 
-                       // Reserve space for 8 bytes padding.
+                       /* Reserve space for 8 bytes padding. */
                        if ((pHTTXContext->ENextBulkOutPosition ==
                             pHTTXContext->CurWritePosition)) {
 
@@ -375,43 +375,43 @@ USHORT RtmpUSB_WriteMultiTxResource(IN PRTMP_ADAPTER pAd,
                            &pHTTXContext->TransferBuffer->field.
                            WirelessPacket[fillOffset];
 
-                       //
-                       // Copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer
-                       //
+                       /* */
+                       /* Copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer */
+                       /* */
                        if (pTxBlk->TxFrameType == TX_AMSDU_FRAME)
-                               //hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen-LENGTH_AMSDU_SUBFRAMEHEAD, 4)+LENGTH_AMSDU_SUBFRAMEHEAD;
+                               /*hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen-LENGTH_AMSDU_SUBFRAMEHEAD, 4)+LENGTH_AMSDU_SUBFRAMEHEAD; */
                                hwHdrLen =
                                    pTxBlk->MpduHeaderLen -
                                    LENGTH_AMSDU_SUBFRAMEHEAD +
                                    pTxBlk->HdrPadLen +
                                    LENGTH_AMSDU_SUBFRAMEHEAD;
                        else if (pTxBlk->TxFrameType == TX_RALINK_FRAME)
-                               //hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen-LENGTH_ARALINK_HEADER_FIELD, 4)+LENGTH_ARALINK_HEADER_FIELD;
+                               /*hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen-LENGTH_ARALINK_HEADER_FIELD, 4)+LENGTH_ARALINK_HEADER_FIELD; */
                                hwHdrLen =
                                    pTxBlk->MpduHeaderLen -
                                    LENGTH_ARALINK_HEADER_FIELD +
                                    pTxBlk->HdrPadLen +
                                    LENGTH_ARALINK_HEADER_FIELD;
                        else
-                               //hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4);
+                               /*hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4); */
                                hwHdrLen =
                                    pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen;
 
-                       // Update the pTxBlk->Priv.
+                       /* Update the pTxBlk->Priv. */
                        pTxBlk->Priv = TXINFO_SIZE + TXWI_SIZE + hwHdrLen;
 
-                       //      pTxInfo->USBDMApktLen now just a temp value and will to correct latter.
+                       /*      pTxInfo->USBDMApktLen now just a temp value and will to correct latter. */
                        RTMPWriteTxInfo(pAd, pTxInfo, (USHORT) (pTxBlk->Priv),
                                        FALSE, FIFO_EDCA, FALSE /*NextValid */ ,
                                        FALSE);
 
-                       // Copy it.
+                       /* Copy it. */
                        NdisMoveMemory(pWirelessPacket, pTxBlk->HeaderBuf,
                                       pTxBlk->Priv);
                        pHTTXContext->CurWriteRealPos += pTxBlk->Priv;
                        pWirelessPacket += pTxBlk->Priv;
                }
-       } else {                // For sub-sequent frames of this bulk-out batch. Just copy it to our bulk-out buffer.
+       } else {                /* For sub-sequent frames of this bulk-out batch. Just copy it to our bulk-out buffer. */
 
                Status =
                    ((pHTTXContext->bCurWriting ==
@@ -423,28 +423,28 @@ USHORT RtmpUSB_WriteMultiTxResource(IN PRTMP_ADAPTER pAd,
                            &pHTTXContext->TransferBuffer->field.
                            WirelessPacket[fillOffset];
 
-                       //hwHdrLen = pTxBlk->MpduHeaderLen;
+                       /*hwHdrLen = pTxBlk->MpduHeaderLen; */
                        NdisMoveMemory(pWirelessPacket, pTxBlk->HeaderBuf,
                                       pTxBlk->MpduHeaderLen);
                        pWirelessPacket += (pTxBlk->MpduHeaderLen);
                        pTxBlk->Priv += pTxBlk->MpduHeaderLen;
-               } else {        // It should not happened now unless we are going to shutdown.
+               } else {        /* It should not happened now unless we are going to shutdown. */
                        DBGPRINT(RT_DEBUG_ERROR,
                                 ("WriteMultiTxResource():bCurWriting is FALSE when handle sub-sequent frames.\n"));
                        Status = NDIS_STATUS_FAILURE;
                }
        }
 
-       // We unlock it here to prevent the first 8 bytes maybe over-write issue.
-       //      1. First we got CurWritePosition but the first 8 bytes still not write to the pTxContext.
-       //      2. An interrupt break our routine and handle bulk-out complete.
-       //      3. In the bulk-out compllete, it need to do another bulk-out,
-       //                      if the ENextBulkOutPosition is just the same as CurWritePosition, it will save the first 8 bytes from CurWritePosition,
-       //                      but the payload still not copyed. the pTxContext->SavedPad[] will save as allzero. and set the bCopyPad = TRUE.
-       //      4. Interrupt complete.
-       //  5. Our interrupted routine go back and fill the first 8 bytes to pTxContext.
-       //      6. Next time when do bulk-out, it found the bCopyPad==TRUE and will copy the SavedPad[] to pTxContext->NextBulkOutPosition.
-       //              and the packet will wrong.
+       /* We unlock it here to prevent the first 8 bytes maybe over-write issue. */
+       /*      1. First we got CurWritePosition but the first 8 bytes still not write to the pTxContext. */
+       /*      2. An interrupt break our routine and handle bulk-out complete. */
+       /*      3. In the bulk-out compllete, it need to do another bulk-out, */
+       /*                      if the ENextBulkOutPosition is just the same as CurWritePosition, it will save the first 8 bytes from CurWritePosition, */
+       /*                      but the payload still not copyed. the pTxContext->SavedPad[] will save as allzero. and set the bCopyPad = TRUE. */
+       /*      4. Interrupt complete. */
+       /*  5. Our interrupted routine go back and fill the first 8 bytes to pTxContext. */
+       /*      6. Next time when do bulk-out, it found the bCopyPad==TRUE and will copy the SavedPad[] to pTxContext->NextBulkOutPosition. */
+       /*              and the packet will wrong. */
        RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
 
        if (Status != NDIS_STATUS_SUCCESS) {
@@ -454,13 +454,13 @@ USHORT RtmpUSB_WriteMultiTxResource(IN PRTMP_ADAPTER pAd,
                          pHTTXContext->NextBulkOutPosition));
                goto done;
        }
-       // Copy the frame content into DMA buffer and update the pTxBlk->Priv
+       /* Copy the frame content into DMA buffer and update the pTxBlk->Priv */
        NdisMoveMemory(pWirelessPacket, pTxBlk->pSrcBufData, pTxBlk->SrcBufLen);
        pWirelessPacket += pTxBlk->SrcBufLen;
        pTxBlk->Priv += pTxBlk->SrcBufLen;
 
 done:
-       // Release the skb buffer here
+       /* Release the skb buffer here */
        RELEASE_NDIS_PACKET(pAd, pTxBlk->pPacket, NDIS_STATUS_SUCCESS);
 
        return (Status);
@@ -498,47 +498,47 @@ VOID RtmpUSB_FinalWriteTxResource(IN PRTMP_ADAPTER pAd,
                            (PUCHAR) (&pHTTXContext->TransferBuffer->field.
                                      WirelessPacket[fillOffset]);
 
-               //
-               // Update TxInfo->USBDMApktLen ,
-               //              the length = TXWI_SIZE + 802.11_hdr + 802.11_hdr_pad + payload_of_all_batch_frames + Bulk-Out-padding
-               //
+               /* */
+               /* Update TxInfo->USBDMApktLen , */
+               /*              the length = TXWI_SIZE + 802.11_hdr + 802.11_hdr_pad + payload_of_all_batch_frames + Bulk-Out-padding */
+               /* */
                pTxInfo = (PTXINFO_STRUC) (pWirelessPacket);
 
-               // Calculate the bulk-out padding
+               /* Calculate the bulk-out padding */
                USBDMApktLen = pTxBlk->Priv - TXINFO_SIZE;
-               padding = (4 - (USBDMApktLen % 4)) & 0x03;      // round up to 4 byte alignment
+               padding = (4 - (USBDMApktLen % 4)) & 0x03;      /* round up to 4 byte alignment */
                USBDMApktLen += padding;
 
                pTxInfo->USBDMATxPktLen = USBDMApktLen;
 
-               //
-               // Update TXWI->MPDUtotalByteCount ,
-               //              the length = 802.11 header + payload_of_all_batch_frames
+               /* */
+               /* Update TXWI->MPDUtotalByteCount , */
+               /*              the length = 802.11 header + payload_of_all_batch_frames */
                pTxWI = (PTXWI_STRUC) (pWirelessPacket + TXINFO_SIZE);
                pTxWI->MPDUtotalByteCount = totalMPDUSize;
 
-               //
-               // Update the pHTTXContext->CurWritePosition
-               //
+               /* */
+               /* Update the pHTTXContext->CurWritePosition */
+               /* */
                pHTTXContext->CurWritePosition += (TXINFO_SIZE + USBDMApktLen);
-               if ((pHTTXContext->CurWritePosition + 3906) > MAX_TXBULK_LIMIT) {       // Add 3906 for prevent the NextBulkOut packet size is a A-RALINK/A-MSDU Frame.
+               if ((pHTTXContext->CurWritePosition + 3906) > MAX_TXBULK_LIMIT) {       /* Add 3906 for prevent the NextBulkOut packet size is a A-RALINK/A-MSDU Frame. */
                        pHTTXContext->CurWritePosition = 8;
                        pTxInfo->SwUseLastRound = 1;
                }
                pHTTXContext->CurWriteRealPos = pHTTXContext->CurWritePosition;
 
-               //
-               //      Zero the last padding.
-               //
+               /* */
+               /*      Zero the last padding. */
+               /* */
                pWirelessPacket =
                    (&pHTTXContext->TransferBuffer->field.
                     WirelessPacket[fillOffset + pTxBlk->Priv]);
                NdisZeroMemory(pWirelessPacket, padding + 8);
 
-               // Finally, set bCurWriting as FALSE
+               /* Finally, set bCurWriting as FALSE */
                pHTTXContext->bCurWriting = FALSE;
 
-       } else {                // It should not happened now unless we are going to shutdown.
+       } else {                /* It should not happened now unless we are going to shutdown. */
                DBGPRINT(RT_DEBUG_ERROR,
                         ("FinalWriteTxResource():bCurWriting is FALSE when handle last frames.\n"));
        }
@@ -550,7 +550,7 @@ VOID RtmpUSB_FinalWriteTxResource(IN PRTMP_ADAPTER pAd,
 VOID RtmpUSBDataLastTxIdx(IN PRTMP_ADAPTER pAd,
                          IN UCHAR QueIdx, IN USHORT TxIdx)
 {
-       // DO nothing for USB.
+       /* DO nothing for USB. */
 }
 
 /*
@@ -589,22 +589,22 @@ int RtmpUSBMgmtKickOut(IN RTMP_ADAPTER * pAd,
 
        pTxInfo = (PTXINFO_STRUC) (pSrcBufVA);
 
-       // Build our URB for USBD
+       /* Build our URB for USBD */
        BulkOutSize = SrcBufLen;
        BulkOutSize = (BulkOutSize + 3) & (~3);
        RTMPWriteTxInfo(pAd, pTxInfo, (USHORT) (BulkOutSize - TXINFO_SIZE),
                        TRUE, EpToQueue[MGMTPIPEIDX], FALSE, FALSE);
 
-       BulkOutSize += 4;       // Always add 4 extra bytes at every packet.
+       BulkOutSize += 4;       /* Always add 4 extra bytes at every packet. */
 
-       // If BulkOutSize is multiple of BulkOutMaxPacketSize, add extra 4 bytes again.
+       /* If BulkOutSize is multiple of BulkOutMaxPacketSize, add extra 4 bytes again. */
        if ((BulkOutSize % pAd->BulkOutMaxPacketSize) == 0)
                BulkOutSize += 4;
 
        padLen = BulkOutSize - SrcBufLen;
        ASSERT((padLen <= RTMP_PKT_TAIL_PADDING));
 
-       // Now memzero all extra padding bytes.
+       /* Now memzero all extra padding bytes. */
        pDest = (PUCHAR) (pSrcBufVA + SrcBufLen);
        skb_put(GET_OS_PKT_TYPE(pPacket), padLen);
        NdisZeroMemory(pDest, padLen);
@@ -615,28 +615,28 @@ int RtmpUSBMgmtKickOut(IN RTMP_ADAPTER * pAd,
        pMLMEContext->TransferBuffer =
            (PTX_BUFFER) (GET_OS_PKT_DATAPTR(pPacket));
 
-       // Length in TxInfo should be 8 less than bulkout size.
+       /* Length in TxInfo should be 8 less than bulkout size. */
        pMLMEContext->BulkOutSize = BulkOutSize;
        pMLMEContext->InUse = TRUE;
        pMLMEContext->bWaitingBulkOut = TRUE;
 
-       //for debug
-       //hex_dump("RtmpUSBMgmtKickOut", &pMLMEContext->TransferBuffer->field.WirelessPacket[0], (pMLMEContext->BulkOutSize > 16 ? 16 : pMLMEContext->BulkOutSize));
+       /*for debug */
+       /*hex_dump("RtmpUSBMgmtKickOut", &pMLMEContext->TransferBuffer->field.WirelessPacket[0], (pMLMEContext->BulkOutSize > 16 ? 16 : pMLMEContext->BulkOutSize)); */
 
-       //pAd->RalinkCounters.KickTxCount++;
-       //pAd->RalinkCounters.OneSecTxDoneCount++;
+       /*pAd->RalinkCounters.KickTxCount++; */
+       /*pAd->RalinkCounters.OneSecTxDoneCount++; */
 
-       //if (pAd->MgmtRing.TxSwFreeIdx == MGMT_RING_SIZE)
-       //      needKickOut = TRUE;
+       /*if (pAd->MgmtRing.TxSwFreeIdx == MGMT_RING_SIZE) */
+       /*      needKickOut = TRUE; */
 
-       // Decrease the TxSwFreeIdx and Increase the TX_CTX_IDX
+       /* Decrease the TxSwFreeIdx and Increase the TX_CTX_IDX */
        pAd->MgmtRing.TxSwFreeIdx--;
        INC_RING_INDEX(pAd->MgmtRing.TxCpuIdx, MGMT_RING_SIZE);
 
        RTMP_IRQ_UNLOCK(&pAd->MLMEBulkOutLock, IrqFlags);
 
        RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_MLME);
-       //if (needKickOut)
+       /*if (needKickOut) */
        RTUSBKickBulkOut(pAd);
 
        return 0;
@@ -654,7 +654,7 @@ VOID RtmpUSBNullFrameKickOut(IN RTMP_ADAPTER * pAd,
 
                pNullContext = &(pAd->NullContext);
 
-               // Set the in use bit
+               /* Set the in use bit */
                pNullContext->InUse = TRUE;
                pWirelessPkt =
                    (PUCHAR) & pNullContext->TransferBuffer->field.
@@ -677,14 +677,14 @@ VOID RtmpUSBNullFrameKickOut(IN RTMP_ADAPTER * pAd,
                pAd->NullContext.BulkOutSize =
                    TXINFO_SIZE + TXWI_SIZE + sizeof(pAd->NullFrame) + 4;
 
-               // Fill out frame length information for global Bulk out arbitor
-               //pNullContext->BulkOutSize = TransferBufferLength;
+               /* Fill out frame length information for global Bulk out arbitor */
+               /*pNullContext->BulkOutSize = TransferBufferLength; */
                DBGPRINT(RT_DEBUG_TRACE,
                         ("SYNC - send NULL Frame @%d Mbps...\n",
                          RateIdToMbps[pAd->CommonCfg.TxRate]));
                RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NULL);
 
-               // Kick bulk out
+               /* Kick bulk out */
                RTUSBKickBulkOut(pAd);
        }
 
@@ -731,7 +731,7 @@ PNDIS_PACKET GetPacketFromRxRing(IN PRTMP_ADAPTER pAd,
        }
 
        pData = &pRxContext->TransferBuffer[pAd->ReadPosition]; /* 4KB */
-       // The RXDMA field is 4 bytes, now just use the first 2 bytes. The Length including the (RXWI + MSDU + Padding)
+       /* The RXDMA field is 4 bytes, now just use the first 2 bytes. The Length including the (RXWI + MSDU + Padding) */
        ThisFrameLen = *pData + (*(pData + 1) << 8);
        if (ThisFrameLen == 0) {
                DBGPRINT(RT_DEBUG_TRACE,
@@ -748,7 +748,7 @@ PNDIS_PACKET GetPacketFromRxRing(IN PRTMP_ADAPTER pAd,
                goto label_null;
        }
 
-       if ((ThisFrameLen + 8) > RxBufferLength)        // 8 for (RT2870_RXDMALEN_FIELD_SIZE + sizeof(RXINFO_STRUC))
+       if ((ThisFrameLen + 8) > RxBufferLength)        /* 8 for (RT2870_RXDMALEN_FIELD_SIZE + sizeof(RXINFO_STRUC)) */
        {
                DBGPRINT(RT_DEBUG_TRACE,
                         ("BIRIdx(%d):FrameLen(0x%lx) outranges. BulkInLen=0x%lx, remaining RxBufLen=0x%lx, ReadPos=0x%lx\n",
@@ -756,10 +756,10 @@ PNDIS_PACKET GetPacketFromRxRing(IN PRTMP_ADAPTER pAd,
                          pRxContext->BulkInOffset, RxBufferLength,
                          pAd->ReadPosition));
 
-               // error frame. finish this loop
+               /* error frame. finish this loop */
                goto label_null;
        }
-       // skip USB frame length field
+       /* skip USB frame length field */
        pData += RT2870_RXDMALEN_FIELD_SIZE;
        pRxWI = (PRXWI_STRUC) pData;
        if (pRxWI->MPDUtotalByteCount > ThisFrameLen) {
@@ -769,7 +769,7 @@ PNDIS_PACKET GetPacketFromRxRing(IN PRTMP_ADAPTER pAd,
                          ThisFrameLen));
                goto label_null;
        }
-       // allocate a rx packet
+       /* allocate a rx packet */
        pSkb = dev_alloc_skb(ThisFrameLen);
        if (pSkb == NULL) {
                DBGPRINT(RT_DEBUG_ERROR,
@@ -777,16 +777,16 @@ PNDIS_PACKET GetPacketFromRxRing(IN PRTMP_ADAPTER pAd,
                          __FUNCTION__));
                goto label_null;
        }
-       // copy the rx packet
+       /* copy the rx packet */
        memcpy(skb_put(pSkb, ThisFrameLen), pData, ThisFrameLen);
        RTPKT_TO_OSPKT(pSkb)->dev = get_netdev_from_bssid(pAd, BSS0);
        RTMP_SET_PACKET_SOURCE(OSPKT_TO_RTPKT(pSkb), PKTSRC_NDIS);
 
-       // copy RxD
+       /* copy RxD */
        *pSaveRxD = *(PRXINFO_STRUC) (pData + ThisFrameLen);
 
-       // update next packet read position.
-       pAd->ReadPosition += (ThisFrameLen + RT2870_RXDMALEN_FIELD_SIZE + RXINFO_SIZE); // 8 for (RT2870_RXDMALEN_FIELD_SIZE + sizeof(RXINFO_STRUC))
+       /* update next packet read position. */
+       pAd->ReadPosition += (ThisFrameLen + RT2870_RXDMALEN_FIELD_SIZE + RXINFO_SIZE); /* 8 for (RT2870_RXDMALEN_FIELD_SIZE + sizeof(RXINFO_STRUC)) */
 
        return pSkb;
 
@@ -824,9 +824,9 @@ NDIS_STATUS RTMPCheckRxError(IN PRTMP_ADAPTER pAd,
        if (pRxINFO == NULL)
                return (NDIS_STATUS_FAILURE);
 
-       // Phy errors & CRC errors
+       /* Phy errors & CRC errors */
        if (pRxINFO->Crc) {
-               // Check RSSI for Noise Hist statistic collection.
+               /* Check RSSI for Noise Hist statistic collection. */
                dBm = (INT) (pRxWI->RSSI0) - pAd->BbpRssiToDbmDelta;
                if (dBm <= -87)
                        pAd->StaCfg.RPIDensity[0] += 1;
@@ -847,25 +847,25 @@ NDIS_STATUS RTMPCheckRxError(IN PRTMP_ADAPTER pAd,
 
                return (NDIS_STATUS_FAILURE);
        }
-       // Add Rx size to channel load counter, we should ignore error counts
+       /* Add Rx size to channel load counter, we should ignore error counts */
        pAd->StaCfg.CLBusyBytes += (pRxWI->MPDUtotalByteCount + 14);
 
-       // Drop ToDs promiscous frame, it is opened due to CCX 2 channel load statistics
+       /* Drop ToDs promiscous frame, it is opened due to CCX 2 channel load statistics */
        if (pHeader->FC.ToDs) {
                DBGPRINT_RAW(RT_DEBUG_ERROR, ("Err;FC.ToDs\n"));
                return NDIS_STATUS_FAILURE;
        }
-       // Paul 04-03 for OFDM Rx length issue
+       /* Paul 04-03 for OFDM Rx length issue */
        if (pRxWI->MPDUtotalByteCount > MAX_AGGREGATION_SIZE) {
                DBGPRINT_RAW(RT_DEBUG_ERROR, ("received packet too long\n"));
                return NDIS_STATUS_FAILURE;
        }
-       // Drop not U2M frames, cant's drop here because we will drop beacon in this case
-       // I am kind of doubting the U2M bit operation
-       // if (pRxD->U2M == 0)
-       //      return(NDIS_STATUS_FAILURE);
+       /* Drop not U2M frames, cant's drop here because we will drop beacon in this case */
+       /* I am kind of doubting the U2M bit operation */
+       /* if (pRxD->U2M == 0) */
+       /*      return(NDIS_STATUS_FAILURE); */
 
-       // drop decyption fail frame
+       /* drop decyption fail frame */
        if (pRxINFO->Decrypted && pRxINFO->CipherErr) {
 
                if (((pRxINFO->CipherErr & 1) == 1)
@@ -879,9 +879,9 @@ NDIS_STATUS RTMPCheckRxError(IN PRTMP_ADAPTER pAd,
                        RTMPSendWirelessEvent(pAd, IW_MIC_ERROR_EVENT_FLAG,
                                              pAd->MacTab.Content[BSSID_WCID].
                                              Addr, BSS0, 0);
-               //
-               // MIC Error
-               //
+               /* */
+               /* MIC Error */
+               /* */
                if ((pRxINFO->CipherErr == 2) && pRxINFO->MyBss) {
                        pWpaKey = &pAd->SharedKey[BSS0][pRxWI->KeyIndex];
                        RTMPReportMicError(pAd, pWpaKey);
@@ -892,9 +892,9 @@ NDIS_STATUS RTMPCheckRxError(IN PRTMP_ADAPTER pAd,
                    (pAd->SharedKey[BSS0][pRxWI->KeyIndex].CipherAlg ==
                     CIPHER_AES)
                    && (pHeader->Sequence == pAd->FragFrame.Sequence)) {
-                       //
-                       // Acceptable since the First FragFrame no CipherErr problem.
-                       //
+                       /* */
+                       /* Acceptable since the First FragFrame no CipherErr problem. */
+                       /* */
                        return (NDIS_STATUS_SUCCESS);
                }
 
@@ -935,17 +935,17 @@ VOID RT28xxUsbStaAsicSleepThenAutoWakeup(IN PRTMP_ADAPTER pAd,
                                         IN USHORT TbttNumToNextWakeUp)
 {
 
-       // we have decided to SLEEP, so at least do it for a BEACON period.
+       /* we have decided to SLEEP, so at least do it for a BEACON period. */
        if (TbttNumToNextWakeUp == 0)
                TbttNumToNextWakeUp = 1;
 
        RTMPSetTimer(&pAd->Mlme.AutoWakeupTimer, AUTO_WAKEUP_TIMEOUT);
        pAd->Mlme.AutoWakeupTimerRunning = TRUE;
 
-       AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x02);      // send POWER-SAVE command to MCU. Timeout 40us.
+       AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x02);      /* send POWER-SAVE command to MCU. Timeout 40us. */
 
        OPSTATUS_SET_FLAG(pAd, fOP_STATUS_DOZE);
 
 }
 
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
index be01b07..610eb75 100644 (file)
@@ -53,144 +53,144 @@ VOID RTMPSetDesiredRates(IN PRTMP_ADAPTER pAdapter, IN LONG Rates)
 
        memset(&aryRates, 0x00, sizeof(NDIS_802_11_RATES));
        switch (pAdapter->CommonCfg.PhyMode) {
-       case PHY_11A:           // A only
+       case PHY_11A:           /* A only */
                switch (Rates) {
-               case 6000000:   //6M
-                       aryRates[0] = 0x0c;     // 6M
+               case 6000000:   /*6M */
+                       aryRates[0] = 0x0c;     /* 6M */
                        pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
                            MCS_0;
                        break;
-               case 9000000:   //9M
-                       aryRates[0] = 0x12;     // 9M
+               case 9000000:   /*9M */
+                       aryRates[0] = 0x12;     /* 9M */
                        pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
                            MCS_1;
                        break;
-               case 12000000:  //12M
-                       aryRates[0] = 0x18;     // 12M
+               case 12000000:  /*12M */
+                       aryRates[0] = 0x18;     /* 12M */
                        pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
                            MCS_2;
                        break;
-               case 18000000:  //18M
-                       aryRates[0] = 0x24;     // 18M
+               case 18000000:  /*18M */
+                       aryRates[0] = 0x24;     /* 18M */
                        pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
                            MCS_3;
                        break;
-               case 24000000:  //24M
-                       aryRates[0] = 0x30;     // 24M
+               case 24000000:  /*24M */
+                       aryRates[0] = 0x30;     /* 24M */
                        pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
                            MCS_4;
                        break;
-               case 36000000:  //36M
-                       aryRates[0] = 0x48;     // 36M
+               case 36000000:  /*36M */
+                       aryRates[0] = 0x48;     /* 36M */
                        pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
                            MCS_5;
                        break;
-               case 48000000:  //48M
-                       aryRates[0] = 0x60;     // 48M
+               case 48000000:  /*48M */
+                       aryRates[0] = 0x60;     /* 48M */
                        pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
                            MCS_6;
                        break;
-               case 54000000:  //54M
-                       aryRates[0] = 0x6c;     // 54M
+               case 54000000:  /*54M */
+                       aryRates[0] = 0x6c;     /* 54M */
                        pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
                            MCS_7;
                        break;
-               case -1:        //Auto
+               case -1:        /*Auto */
                default:
-                       aryRates[0] = 0x6c;     // 54Mbps
-                       aryRates[1] = 0x60;     // 48Mbps
-                       aryRates[2] = 0x48;     // 36Mbps
-                       aryRates[3] = 0x30;     // 24Mbps
-                       aryRates[4] = 0x24;     // 18M
-                       aryRates[5] = 0x18;     // 12M
-                       aryRates[6] = 0x12;     // 9M
-                       aryRates[7] = 0x0c;     // 6M
+                       aryRates[0] = 0x6c;     /* 54Mbps */
+                       aryRates[1] = 0x60;     /* 48Mbps */
+                       aryRates[2] = 0x48;     /* 36Mbps */
+                       aryRates[3] = 0x30;     /* 24Mbps */
+                       aryRates[4] = 0x24;     /* 18M */
+                       aryRates[5] = 0x18;     /* 12M */
+                       aryRates[6] = 0x12;     /* 9M */
+                       aryRates[7] = 0x0c;     /* 6M */
                        pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
                            MCS_AUTO;
                        break;
                }
                break;
-       case PHY_11BG_MIXED:    // B/G Mixed
-       case PHY_11B:           // B only
-       case PHY_11ABG_MIXED:   // A/B/G Mixed
+       case PHY_11BG_MIXED:    /* B/G Mixed */
+       case PHY_11B:           /* B only */
+       case PHY_11ABG_MIXED:   /* A/B/G Mixed */
        default:
                switch (Rates) {
-               case 1000000:   //1M
+               case 1000000:   /*1M */
                        aryRates[0] = 0x02;
                        pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
                            MCS_0;
                        break;
-               case 2000000:   //2M
+               case 2000000:   /*2M */
                        aryRates[0] = 0x04;
                        pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
                            MCS_1;
                        break;
-               case 5000000:   //5.5M
-                       aryRates[0] = 0x0b;     // 5.5M
+               case 5000000:   /*5.5M */
+                       aryRates[0] = 0x0b;     /* 5.5M */
                        pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
                            MCS_2;
                        break;
-               case 11000000:  //11M
-                       aryRates[0] = 0x16;     // 11M
+               case 11000000:  /*11M */
+                       aryRates[0] = 0x16;     /* 11M */
                        pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
                            MCS_3;
                        break;
-               case 6000000:   //6M
-                       aryRates[0] = 0x0c;     // 6M
+               case 6000000:   /*6M */
+                       aryRates[0] = 0x0c;     /* 6M */
                        pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
                            MCS_0;
                        break;
-               case 9000000:   //9M
-                       aryRates[0] = 0x12;     // 9M
+               case 9000000:   /*9M */
+                       aryRates[0] = 0x12;     /* 9M */
                        pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
                            MCS_1;
                        break;
-               case 12000000:  //12M
-                       aryRates[0] = 0x18;     // 12M
+               case 12000000:  /*12M */
+                       aryRates[0] = 0x18;     /* 12M */
                        pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
                            MCS_2;
                        break;
-               case 18000000:  //18M
-                       aryRates[0] = 0x24;     // 18M
+               case 18000000:  /*18M */
+                       aryRates[0] = 0x24;     /* 18M */
                        pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
                            MCS_3;
                        break;
-               case 24000000:  //24M
-                       aryRates[0] = 0x30;     // 24M
+               case 24000000:  /*24M */
+                       aryRates[0] = 0x30;     /* 24M */
                        pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
                            MCS_4;
                        break;
-               case 36000000:  //36M
-                       aryRates[0] = 0x48;     // 36M
+               case 36000000:  /*36M */
+                       aryRates[0] = 0x48;     /* 36M */
                        pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
                            MCS_5;
                        break;
-               case 48000000:  //48M
-                       aryRates[0] = 0x60;     // 48M
+               case 48000000:  /*48M */
+                       aryRates[0] = 0x60;     /* 48M */
                        pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
                            MCS_6;
                        break;
-               case 54000000:  //54M
-                       aryRates[0] = 0x6c;     // 54M
+               case 54000000:  /*54M */
+                       aryRates[0] = 0x6c;     /* 54M */
                        pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
                            MCS_7;
                        break;
-               case -1:        //Auto
+               case -1:        /*Auto */
                default:
-                       if (pAdapter->CommonCfg.PhyMode == PHY_11B) {   //B Only
-                               aryRates[0] = 0x16;     // 11Mbps
-                               aryRates[1] = 0x0b;     // 5.5Mbps
-                               aryRates[2] = 0x04;     // 2Mbps
-                               aryRates[3] = 0x02;     // 1Mbps
-                       } else {        //(B/G) Mixed or (A/B/G) Mixed
-                               aryRates[0] = 0x6c;     // 54Mbps
-                               aryRates[1] = 0x60;     // 48Mbps
-                               aryRates[2] = 0x48;     // 36Mbps
-                               aryRates[3] = 0x30;     // 24Mbps
-                               aryRates[4] = 0x16;     // 11Mbps
-                               aryRates[5] = 0x0b;     // 5.5Mbps
-                               aryRates[6] = 0x04;     // 2Mbps
-                               aryRates[7] = 0x02;     // 1Mbps
+                       if (pAdapter->CommonCfg.PhyMode == PHY_11B) {   /*B Only */
+                               aryRates[0] = 0x16;     /* 11Mbps */
+                               aryRates[1] = 0x0b;     /* 5.5Mbps */
+                               aryRates[2] = 0x04;     /* 2Mbps */
+                               aryRates[3] = 0x02;     /* 1Mbps */
+                       } else {        /*(B/G) Mixed or (A/B/G) Mixed */
+                               aryRates[0] = 0x6c;     /* 54Mbps */
+                               aryRates[1] = 0x60;     /* 48Mbps */
+                               aryRates[2] = 0x48;     /* 36Mbps */
+                               aryRates[3] = 0x30;     /* 24Mbps */
+                               aryRates[4] = 0x16;     /* 11Mbps */
+                               aryRates[5] = 0x0b;     /* 5.5Mbps */
+                               aryRates[6] = 0x04;     /* 2Mbps */
+                               aryRates[7] = 0x02;     /* 1Mbps */
                        }
                        pAdapter->StaCfg.DesiredTransmitSetting.field.MCS =
                            MCS_AUTO;
@@ -213,7 +213,7 @@ VOID RTMPSetDesiredRates(IN PRTMP_ADAPTER pAdapter, IN LONG Rates)
                  pAdapter->CommonCfg.DesireRate[5],
                  pAdapter->CommonCfg.DesireRate[6],
                  pAdapter->CommonCfg.DesireRate[7]));
-       // Changing DesiredRate may affect the MAX TX rate we used to TX frames out
+       /* Changing DesiredRate may affect the MAX TX rate we used to TX frames out */
        MlmeUpdateTxRates(pAdapter, FALSE, 0);
 }
 
@@ -244,20 +244,20 @@ VOID RTMPWPARemoveAllKeys(IN PRTMP_ADAPTER pAd)
                 ("RTMPWPARemoveAllKeys(AuthMode=%d, WepStatus=%d)\n",
                  pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus));
        RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP);
-       // For WEP/CKIP, there is no need to remove it, since WinXP won't set it again after
-       // Link up. And it will be replaced if user changed it.
+       /* For WEP/CKIP, there is no need to remove it, since WinXP won't set it again after */
+       /* Link up. And it will be replaced if user changed it. */
        if (pAd->StaCfg.AuthMode < Ndis802_11AuthModeWPA)
                return;
 
-       // For WPA-None, there is no need to remove it, since WinXP won't set it again after
-       // Link up. And it will be replaced if user changed it.
+       /* For WPA-None, there is no need to remove it, since WinXP won't set it again after */
+       /* Link up. And it will be replaced if user changed it. */
        if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone)
                return;
 
-       // set BSSID wcid entry of the Pair-wise Key table as no-security mode
+       /* set BSSID wcid entry of the Pair-wise Key table as no-security mode */
        AsicRemovePairwiseKeyEntry(pAd, BSS0, BSSID_WCID);
 
-       // set all shared key mode as no-security.
+       /* set all shared key mode as no-security. */
        for (i = 0; i < SHARE_KEY_NUM; i++) {
                DBGPRINT(RT_DEBUG_TRACE,
                         ("remove %s key #%d\n",
@@ -310,9 +310,9 @@ VOID RTMPWPARemoveAllKeys(IN PRTMP_ADAPTER pAd)
 VOID RTMPSetPhyMode(IN PRTMP_ADAPTER pAd, IN ULONG phymode)
 {
        INT i;
-       // the selected phymode must be supported by the RF IC encoded in E2PROM
+       /* the selected phymode must be supported by the RF IC encoded in E2PROM */
 
-       // if no change, do nothing
+       /* if no change, do nothing */
        /* bug fix
           if (pAd->CommonCfg.PhyMode == phymode)
           return;
@@ -325,7 +325,7 @@ VOID RTMPSetPhyMode(IN PRTMP_ADAPTER pAd, IN ULONG phymode)
 
        BuildChannelList(pAd);
 
-       // sanity check user setting
+       /* sanity check user setting */
        for (i = 0; i < pAd->ChannelListNum; i++) {
                if (pAd->CommonCfg.Channel == pAd->ChannelList[i].Channel)
                        break;
@@ -343,17 +343,17 @@ VOID RTMPSetPhyMode(IN PRTMP_ADAPTER pAd, IN ULONG phymode)
        NdisZeroMemory(pAd->CommonCfg.DesireRate, MAX_LEN_OF_SUPPORTED_RATES);
        switch (phymode) {
        case PHY_11B:
-               pAd->CommonCfg.SupRate[0] = 0x82;       // 1 mbps, in units of 0.5 Mbps, basic rate
-               pAd->CommonCfg.SupRate[1] = 0x84;       // 2 mbps, in units of 0.5 Mbps, basic rate
-               pAd->CommonCfg.SupRate[2] = 0x8B;       // 5.5 mbps, in units of 0.5 Mbps, basic rate
-               pAd->CommonCfg.SupRate[3] = 0x96;       // 11 mbps, in units of 0.5 Mbps, basic rate
+               pAd->CommonCfg.SupRate[0] = 0x82;       /* 1 mbps, in units of 0.5 Mbps, basic rate */
+               pAd->CommonCfg.SupRate[1] = 0x84;       /* 2 mbps, in units of 0.5 Mbps, basic rate */
+               pAd->CommonCfg.SupRate[2] = 0x8B;       /* 5.5 mbps, in units of 0.5 Mbps, basic rate */
+               pAd->CommonCfg.SupRate[3] = 0x96;       /* 11 mbps, in units of 0.5 Mbps, basic rate */
                pAd->CommonCfg.SupRateLen = 4;
                pAd->CommonCfg.ExtRateLen = 0;
-               pAd->CommonCfg.DesireRate[0] = 2;       // 1 mbps, in units of 0.5 Mbps
-               pAd->CommonCfg.DesireRate[1] = 4;       // 2 mbps, in units of 0.5 Mbps
-               pAd->CommonCfg.DesireRate[2] = 11;      // 5.5 mbps, in units of 0.5 Mbps
-               pAd->CommonCfg.DesireRate[3] = 22;      // 11 mbps, in units of 0.5 Mbps
-               //pAd->CommonCfg.HTPhyMode.field.MODE = MODE_CCK; // This MODE is only FYI. not use
+               pAd->CommonCfg.DesireRate[0] = 2;       /* 1 mbps, in units of 0.5 Mbps */
+               pAd->CommonCfg.DesireRate[1] = 4;       /* 2 mbps, in units of 0.5 Mbps */
+               pAd->CommonCfg.DesireRate[2] = 11;      /* 5.5 mbps, in units of 0.5 Mbps */
+               pAd->CommonCfg.DesireRate[3] = 22;      /* 11 mbps, in units of 0.5 Mbps */
+               /*pAd->CommonCfg.HTPhyMode.field.MODE = MODE_CCK; // This MODE is only FYI. not use */
                break;
 
        case PHY_11G:
@@ -363,57 +363,57 @@ VOID RTMPSetPhyMode(IN PRTMP_ADAPTER pAd, IN ULONG phymode)
        case PHY_11ABGN_MIXED:
        case PHY_11BGN_MIXED:
        case PHY_11GN_MIXED:
-               pAd->CommonCfg.SupRate[0] = 0x82;       // 1 mbps, in units of 0.5 Mbps, basic rate
-               pAd->CommonCfg.SupRate[1] = 0x84;       // 2 mbps, in units of 0.5 Mbps, basic rate
-               pAd->CommonCfg.SupRate[2] = 0x8B;       // 5.5 mbps, in units of 0.5 Mbps, basic rate
-               pAd->CommonCfg.SupRate[3] = 0x96;       // 11 mbps, in units of 0.5 Mbps, basic rate
-               pAd->CommonCfg.SupRate[4] = 0x12;       // 9 mbps, in units of 0.5 Mbps
-               pAd->CommonCfg.SupRate[5] = 0x24;       // 18 mbps, in units of 0.5 Mbps
-               pAd->CommonCfg.SupRate[6] = 0x48;       // 36 mbps, in units of 0.5 Mbps
-               pAd->CommonCfg.SupRate[7] = 0x6c;       // 54 mbps, in units of 0.5 Mbps
+               pAd->CommonCfg.SupRate[0] = 0x82;       /* 1 mbps, in units of 0.5 Mbps, basic rate */
+               pAd->CommonCfg.SupRate[1] = 0x84;       /* 2 mbps, in units of 0.5 Mbps, basic rate */
+               pAd->CommonCfg.SupRate[2] = 0x8B;       /* 5.5 mbps, in units of 0.5 Mbps, basic rate */
+               pAd->CommonCfg.SupRate[3] = 0x96;       /* 11 mbps, in units of 0.5 Mbps, basic rate */
+               pAd->CommonCfg.SupRate[4] = 0x12;       /* 9 mbps, in units of 0.5 Mbps */
+               pAd->CommonCfg.SupRate[5] = 0x24;       /* 18 mbps, in units of 0.5 Mbps */
+               pAd->CommonCfg.SupRate[6] = 0x48;       /* 36 mbps, in units of 0.5 Mbps */
+               pAd->CommonCfg.SupRate[7] = 0x6c;       /* 54 mbps, in units of 0.5 Mbps */
                pAd->CommonCfg.SupRateLen = 8;
-               pAd->CommonCfg.ExtRate[0] = 0x0C;       // 6 mbps, in units of 0.5 Mbps
-               pAd->CommonCfg.ExtRate[1] = 0x18;       // 12 mbps, in units of 0.5 Mbps
-               pAd->CommonCfg.ExtRate[2] = 0x30;       // 24 mbps, in units of 0.5 Mbps
-               pAd->CommonCfg.ExtRate[3] = 0x60;       // 48 mbps, in units of 0.5 Mbps
+               pAd->CommonCfg.ExtRate[0] = 0x0C;       /* 6 mbps, in units of 0.5 Mbps */
+               pAd->CommonCfg.ExtRate[1] = 0x18;       /* 12 mbps, in units of 0.5 Mbps */
+               pAd->CommonCfg.ExtRate[2] = 0x30;       /* 24 mbps, in units of 0.5 Mbps */
+               pAd->CommonCfg.ExtRate[3] = 0x60;       /* 48 mbps, in units of 0.5 Mbps */
                pAd->CommonCfg.ExtRateLen = 4;
-               pAd->CommonCfg.DesireRate[0] = 2;       // 1 mbps, in units of 0.5 Mbps
-               pAd->CommonCfg.DesireRate[1] = 4;       // 2 mbps, in units of 0.5 Mbps
-               pAd->CommonCfg.DesireRate[2] = 11;      // 5.5 mbps, in units of 0.5 Mbps
-               pAd->CommonCfg.DesireRate[3] = 22;      // 11 mbps, in units of 0.5 Mbps
-               pAd->CommonCfg.DesireRate[4] = 12;      // 6 mbps, in units of 0.5 Mbps
-               pAd->CommonCfg.DesireRate[5] = 18;      // 9 mbps, in units of 0.5 Mbps
-               pAd->CommonCfg.DesireRate[6] = 24;      // 12 mbps, in units of 0.5 Mbps
-               pAd->CommonCfg.DesireRate[7] = 36;      // 18 mbps, in units of 0.5 Mbps
-               pAd->CommonCfg.DesireRate[8] = 48;      // 24 mbps, in units of 0.5 Mbps
-               pAd->CommonCfg.DesireRate[9] = 72;      // 36 mbps, in units of 0.5 Mbps
-               pAd->CommonCfg.DesireRate[10] = 96;     // 48 mbps, in units of 0.5 Mbps
-               pAd->CommonCfg.DesireRate[11] = 108;    // 54 mbps, in units of 0.5 Mbps
+               pAd->CommonCfg.DesireRate[0] = 2;       /* 1 mbps, in units of 0.5 Mbps */
+               pAd->CommonCfg.DesireRate[1] = 4;       /* 2 mbps, in units of 0.5 Mbps */
+               pAd->CommonCfg.DesireRate[2] = 11;      /* 5.5 mbps, in units of 0.5 Mbps */
+               pAd->CommonCfg.DesireRate[3] = 22;      /* 11 mbps, in units of 0.5 Mbps */
+               pAd->CommonCfg.DesireRate[4] = 12;      /* 6 mbps, in units of 0.5 Mbps */
+               pAd->CommonCfg.DesireRate[5] = 18;      /* 9 mbps, in units of 0.5 Mbps */
+               pAd->CommonCfg.DesireRate[6] = 24;      /* 12 mbps, in units of 0.5 Mbps */
+               pAd->CommonCfg.DesireRate[7] = 36;      /* 18 mbps, in units of 0.5 Mbps */
+               pAd->CommonCfg.DesireRate[8] = 48;      /* 24 mbps, in units of 0.5 Mbps */
+               pAd->CommonCfg.DesireRate[9] = 72;      /* 36 mbps, in units of 0.5 Mbps */
+               pAd->CommonCfg.DesireRate[10] = 96;     /* 48 mbps, in units of 0.5 Mbps */
+               pAd->CommonCfg.DesireRate[11] = 108;    /* 54 mbps, in units of 0.5 Mbps */
                break;
 
        case PHY_11A:
        case PHY_11AN_MIXED:
        case PHY_11AGN_MIXED:
        case PHY_11N_5G:
-               pAd->CommonCfg.SupRate[0] = 0x8C;       // 6 mbps, in units of 0.5 Mbps, basic rate
-               pAd->CommonCfg.SupRate[1] = 0x12;       // 9 mbps, in units of 0.5 Mbps
-               pAd->CommonCfg.SupRate[2] = 0x98;       // 12 mbps, in units of 0.5 Mbps, basic rate
-               pAd->CommonCfg.SupRate[3] = 0x24;       // 18 mbps, in units of 0.5 Mbps
-               pAd->CommonCfg.SupRate[4] = 0xb0;       // 24 mbps, in units of 0.5 Mbps, basic rate
-               pAd->CommonCfg.SupRate[5] = 0x48;       // 36 mbps, in units of 0.5 Mbps
-               pAd->CommonCfg.SupRate[6] = 0x60;       // 48 mbps, in units of 0.5 Mbps
-               pAd->CommonCfg.SupRate[7] = 0x6c;       // 54 mbps, in units of 0.5 Mbps
+               pAd->CommonCfg.SupRate[0] = 0x8C;       /* 6 mbps, in units of 0.5 Mbps, basic rate */
+               pAd->CommonCfg.SupRate[1] = 0x12;       /* 9 mbps, in units of 0.5 Mbps */
+               pAd->CommonCfg.SupRate[2] = 0x98;       /* 12 mbps, in units of 0.5 Mbps, basic rate */
+               pAd->CommonCfg.SupRate[3] = 0x24;       /* 18 mbps, in units of 0.5 Mbps */
+               pAd->CommonCfg.SupRate[4] = 0xb0;       /* 24 mbps, in units of 0.5 Mbps, basic rate */
+               pAd->CommonCfg.SupRate[5] = 0x48;       /* 36 mbps, in units of 0.5 Mbps */
+               pAd->CommonCfg.SupRate[6] = 0x60;       /* 48 mbps, in units of 0.5 Mbps */
+               pAd->CommonCfg.SupRate[7] = 0x6c;       /* 54 mbps, in units of 0.5 Mbps */
                pAd->CommonCfg.SupRateLen = 8;
                pAd->CommonCfg.ExtRateLen = 0;
-               pAd->CommonCfg.DesireRate[0] = 12;      // 6 mbps, in units of 0.5 Mbps
-               pAd->CommonCfg.DesireRate[1] = 18;      // 9 mbps, in units of 0.5 Mbps
-               pAd->CommonCfg.DesireRate[2] = 24;      // 12 mbps, in units of 0.5 Mbps
-               pAd->CommonCfg.DesireRate[3] = 36;      // 18 mbps, in units of 0.5 Mbps
-               pAd->CommonCfg.DesireRate[4] = 48;      // 24 mbps, in units of 0.5 Mbps
-               pAd->CommonCfg.DesireRate[5] = 72;      // 36 mbps, in units of 0.5 Mbps
-               pAd->CommonCfg.DesireRate[6] = 96;      // 48 mbps, in units of 0.5 Mbps
-               pAd->CommonCfg.DesireRate[7] = 108;     // 54 mbps, in units of 0.5 Mbps
-               //pAd->CommonCfg.HTPhyMode.field.MODE = MODE_OFDM; // This MODE is only FYI. not use
+               pAd->CommonCfg.DesireRate[0] = 12;      /* 6 mbps, in units of 0.5 Mbps */
+               pAd->CommonCfg.DesireRate[1] = 18;      /* 9 mbps, in units of 0.5 Mbps */
+               pAd->CommonCfg.DesireRate[2] = 24;      /* 12 mbps, in units of 0.5 Mbps */
+               pAd->CommonCfg.DesireRate[3] = 36;      /* 18 mbps, in units of 0.5 Mbps */
+               pAd->CommonCfg.DesireRate[4] = 48;      /* 24 mbps, in units of 0.5 Mbps */
+               pAd->CommonCfg.DesireRate[5] = 72;      /* 36 mbps, in units of 0.5 Mbps */
+               pAd->CommonCfg.DesireRate[6] = 96;      /* 48 mbps, in units of 0.5 Mbps */
+               pAd->CommonCfg.DesireRate[7] = 108;     /* 54 mbps, in units of 0.5 Mbps */
+               /*pAd->CommonCfg.HTPhyMode.field.MODE = MODE_OFDM; // This MODE is only FYI. not use */
                break;
 
        default:
@@ -437,7 +437,7 @@ VOID RTMPSetPhyMode(IN PRTMP_ADAPTER pAd, IN ULONG phymode)
 */
 VOID RTMPSetHT(IN PRTMP_ADAPTER pAd, IN OID_SET_HT_PHYMODE * pHTPhyMode)
 {
-       //ULONG *pmcs;
+       /*ULONG *pmcs; */
        UINT32 Value = 0;
        UCHAR BBPValue = 0;
        UCHAR BBP3Value = 0;
@@ -448,7 +448,7 @@ VOID RTMPSetHT(IN PRTMP_ADAPTER pAd, IN OID_SET_HT_PHYMODE * pHTPhyMode)
                  pHTPhyMode->HtMode, pHTPhyMode->ExtOffset, pHTPhyMode->MCS,
                  pHTPhyMode->BW, pHTPhyMode->STBC, pHTPhyMode->SHORTGI));
 
-       // Don't zero supportedHyPhy structure.
+       /* Don't zero supportedHyPhy structure. */
        RTMPZeroMemory(&pAd->CommonCfg.HtCapability,
                       sizeof(pAd->CommonCfg.HtCapability));
        RTMPZeroMemory(&pAd->CommonCfg.AddHTInfo,
@@ -473,7 +473,7 @@ VOID RTMPSetHT(IN PRTMP_ADAPTER pAd, IN OID_SET_HT_PHYMODE * pHTPhyMode)
                 ("RTMPSetHT : RxBAWinLimit = %d\n",
                  pAd->CommonCfg.BACapability.field.RxBAWinLimit));
 
-       // Mimo power save, A-MSDU size,
+       /* Mimo power save, A-MSDU size, */
        pAd->CommonCfg.DesiredHtPhy.AmsduEnable =
            (USHORT) pAd->CommonCfg.BACapability.field.AmsduEnable;
        pAd->CommonCfg.DesiredHtPhy.AmsduSize =
@@ -503,7 +503,7 @@ VOID RTMPSetHT(IN PRTMP_ADAPTER pAd, IN OID_SET_HT_PHYMODE * pHTPhyMode)
        } else
                pAd->CommonCfg.DesiredHtPhy.GF = 0;
 
-       // Decide Rx MCSSet
+       /* Decide Rx MCSSet */
        switch (RxStream) {
        case 1:
                pAd->CommonCfg.HtCapability.MCSSet[0] = 0xff;
@@ -515,7 +515,7 @@ VOID RTMPSetHT(IN PRTMP_ADAPTER pAd, IN OID_SET_HT_PHYMODE * pHTPhyMode)
                pAd->CommonCfg.HtCapability.MCSSet[1] = 0xff;
                break;
 
-       case 3:         // 3*3
+       case 3:         /* 3*3 */
                pAd->CommonCfg.HtCapability.MCSSet[0] = 0xff;
                pAd->CommonCfg.HtCapability.MCSSet[1] = 0xff;
                pAd->CommonCfg.HtCapability.MCSSet[2] = 0xff;
@@ -529,7 +529,7 @@ VOID RTMPSetHT(IN PRTMP_ADAPTER pAd, IN OID_SET_HT_PHYMODE * pHTPhyMode)
        }
 
        if (pHTPhyMode->BW == BW_40) {
-               pAd->CommonCfg.HtCapability.MCSSet[4] = 0x1;    // MCS 32
+               pAd->CommonCfg.HtCapability.MCSSet[4] = 0x1;    /* MCS 32 */
                pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth = 1;
                if (pAd->CommonCfg.Channel <= 14)
                        pAd->CommonCfg.HtCapability.HtCapInfo.CCKmodein40 = 1;
@@ -539,7 +539,7 @@ VOID RTMPSetHT(IN PRTMP_ADAPTER pAd, IN OID_SET_HT_PHYMODE * pHTPhyMode)
                pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset =
                    (pHTPhyMode->ExtOffset ==
                     EXTCHA_BELOW) ? (EXTCHA_BELOW) : EXTCHA_ABOVE;
-               // Set Regsiter for extension channel position.
+               /* Set Regsiter for extension channel position. */
                RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value);
                RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBP3Value);
                if ((pHTPhyMode->ExtOffset == EXTCHA_BELOW)) {
@@ -551,8 +551,8 @@ VOID RTMPSetHT(IN PRTMP_ADAPTER pAd, IN OID_SET_HT_PHYMODE * pHTPhyMode)
                        BBP3Value &= (~0x20);
                        RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);
                }
-               // Turn on BBP 40MHz mode now only as AP .
-               // Sta can turn on BBP 40MHz after connection with 40MHz AP. Sta only broadcast 40MHz capability before connection.
+               /* Turn on BBP 40MHz mode now only as AP . */
+               /* Sta can turn on BBP 40MHz after connection with 40MHz AP. Sta only broadcast 40MHz capability before connection. */
                if ((pAd->OpMode == OPMODE_AP) || INFRA_ON(pAd) || ADHOC_ON(pAd)
                    ) {
                        RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
@@ -569,7 +569,7 @@ VOID RTMPSetHT(IN PRTMP_ADAPTER pAd, IN OID_SET_HT_PHYMODE * pHTPhyMode)
                pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth = 0;
                pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset = EXTCHA_NONE;
                pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel;
-               // Turn on BBP 20MHz mode by request here.
+               /* Turn on BBP 20MHz mode by request here. */
                {
                        RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
                        BBPValue &= (~0x18);
@@ -600,12 +600,12 @@ VOID RTMPSetHT(IN PRTMP_ADAPTER pAd, IN OID_SET_HT_PHYMODE * pHTPhyMode)
                pAd->CommonCfg.DesiredHtPhy.ShortGIfor40 = 0;
        }
 
-       // We support link adaptation for unsolicit MCS feedback, set to 2.
-       pAd->CommonCfg.HtCapability.ExtHtCapInfo.MCSFeedback = MCSFBK_NONE;     //MCSFBK_UNSOLICIT;
+       /* We support link adaptation for unsolicit MCS feedback, set to 2. */
+       pAd->CommonCfg.HtCapability.ExtHtCapInfo.MCSFeedback = MCSFBK_NONE;     /*MCSFBK_UNSOLICIT; */
        pAd->CommonCfg.AddHTInfo.ControlChan = pAd->CommonCfg.Channel;
-       // 1, the extension channel above the control channel.
+       /* 1, the extension channel above the control channel. */
 
-       // EDCA parameters used for AP's own transmission
+       /* EDCA parameters used for AP's own transmission */
        if (pAd->CommonCfg.APEdcaParm.bValid == FALSE) {
                pAd->CommonCfg.APEdcaParm.bValid = TRUE;
                pAd->CommonCfg.APEdcaParm.Aifsn[0] = 3;
@@ -659,7 +659,7 @@ VOID RTMPSetIndividualHT(IN PRTMP_ADAPTER pAd, IN UCHAR apidx)
                        pDesired_ht_phy = &pAd->StaCfg.DesiredHtPhyInfo;
                        DesiredMcs =
                            pAd->StaCfg.DesiredTransmitSetting.field.MCS;
-                       //pAd->StaCfg.bAutoTxRateSwitch = (DesiredMcs == MCS_AUTO) ? TRUE : FALSE;
+                       /*pAd->StaCfg.bAutoTxRateSwitch = (DesiredMcs == MCS_AUTO) ? TRUE : FALSE; */
                        break;
                }
        } while (FALSE);
@@ -673,7 +673,7 @@ VOID RTMPSetIndividualHT(IN PRTMP_ADAPTER pAd, IN UCHAR apidx)
 
        DBGPRINT(RT_DEBUG_TRACE,
                 ("RTMPSetIndividualHT : Desired MCS = %d\n", DesiredMcs));
-       // Check the validity of MCS
+       /* Check the validity of MCS */
        if ((TxStream == 1)
            && ((DesiredMcs >= MCS_8) && (DesiredMcs <= MCS_15))) {
                DBGPRINT(RT_DEBUG_WARN,
@@ -691,7 +691,7 @@ VOID RTMPSetIndividualHT(IN PRTMP_ADAPTER pAd, IN UCHAR apidx)
 
        pDesired_ht_phy->bHtEnable = TRUE;
 
-       // Decide desired Tx MCS
+       /* Decide desired Tx MCS */
        switch (TxStream) {
        case 1:
                if (DesiredMcs == MCS_AUTO) {
@@ -717,7 +717,7 @@ VOID RTMPSetIndividualHT(IN PRTMP_ADAPTER pAd, IN UCHAR apidx)
                }
                break;
 
-       case 3:         // 3*3
+       case 3:         /* 3*3 */
                if (DesiredMcs == MCS_AUTO) {
                        /* MCS0 ~ MCS23, 3 bytes */
                        pDesired_ht_phy->MCSSet[0] = 0xff;
@@ -738,7 +738,7 @@ VOID RTMPSetIndividualHT(IN PRTMP_ADAPTER pAd, IN UCHAR apidx)
                if (DesiredMcs == MCS_AUTO || DesiredMcs == MCS_32)
                        pDesired_ht_phy->MCSSet[4] = 0x1;
        }
-       // update HT Rate setting
+       /* update HT Rate setting */
        if (pAd->OpMode == OPMODE_STA)
                MlmeUpdateHtTxRates(pAd, BSS0);
        else
@@ -778,7 +778,7 @@ VOID RTMPUpdateHTIE(IN RT_HT_CAPABILITY * pRtHt,
        pAddHtInfo->AddHtInfo.RecomWidth = pRtHt->RecomWidth;
        pAddHtInfo->AddHtInfo2.OperaionMode = pRtHt->OperaionMode;
        pAddHtInfo->AddHtInfo2.NonGfPresent = pRtHt->NonGfPresent;
-       RTMPMoveMemory(pAddHtInfo->MCSSet, /*pRtHt->MCSSet */ pMcsSet, 4);      // rt2860 only support MCS max=32, no need to copy all 16 uchar.
+       RTMPMoveMemory(pAddHtInfo->MCSSet, /*pRtHt->MCSSet */ pMcsSet, 4);      /* rt2860 only support MCS max=32, no need to copy all 16 uchar. */
 
        DBGPRINT(RT_DEBUG_TRACE, ("RTMPUpdateHTIE <== \n"));
 }
@@ -808,9 +808,9 @@ VOID RTMPAddWcidAttributeEntry(IN PRTMP_ADAPTER pAd,
                                          BssIdx));
                                return;
                        }
-                       // 1.   In ADHOC mode, the AID is wcid number. And NO mesh link exists.
-                       // 2.   In Infra mode, the AID:1 MUST be wcid of infra STA.
-                       //                                         the AID:2~ assign to mesh link entry.
+                       /* 1.   In ADHOC mode, the AID is wcid number. And NO mesh link exists. */
+                       /* 2.   In Infra mode, the AID:1 MUST be wcid of infra STA. */
+                       /*                                         the AID:2~ assign to mesh link entry. */
                        if (pEntry)
                                Wcid = pEntry->Aid;
                        else
@@ -818,7 +818,7 @@ VOID RTMPAddWcidAttributeEntry(IN PRTMP_ADAPTER pAd,
                }
        }
 
-       // Update WCID attribute table
+       /* Update WCID attribute table */
        offset = MAC_WCID_ATTRIBUTE_BASE + (Wcid * HW_WCID_ATTRI_SIZE);
 
        {
@@ -830,26 +830,26 @@ VOID RTMPAddWcidAttributeEntry(IN PRTMP_ADAPTER pAd,
 
        RTMP_IO_WRITE32(pAd, offset, WCIDAttri);
 
-       // Update IV/EIV table
+       /* Update IV/EIV table */
        offset = MAC_IVEIV_TABLE_BASE + (Wcid * HW_IVEIV_ENTRY_SIZE);
 
-       // WPA mode
+       /* WPA mode */
        if ((CipherAlg == CIPHER_TKIP) || (CipherAlg == CIPHER_TKIP_NO_MIC)
            || (CipherAlg == CIPHER_AES)) {
-               // Eiv bit on. keyid always is 0 for pairwise key
+               /* Eiv bit on. keyid always is 0 for pairwise key */
                IVEIV = (KeyIdx << 6) | 0x20;
        } else {
-               // WEP KeyIdx is default tx key.
+               /* WEP KeyIdx is default tx key. */
                IVEIV = (KeyIdx << 6);
        }
 
-       // For key index and ext IV bit, so only need to update the position(offset+3).
+       /* For key index and ext IV bit, so only need to update the position(offset+3). */
 #ifdef RTMP_MAC_PCI
        RTMP_IO_WRITE8(pAd, offset + 3, IVEIV);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 #ifdef RTMP_MAC_USB
        RTUSBMultiWrite_OneByte(pAd, offset + 3, &IVEIV);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
        DBGPRINT(RT_DEBUG_TRACE,
                 ("RTMPAddWcidAttributeEntry: WCID #%d, KeyIndex #%d, Alg=%s\n",
index c920925..3b6f577 100644 (file)
@@ -61,23 +61,23 @@ NDIS_STATUS RTMPAllocTxRxRingMemory(IN PRTMP_ADAPTER pAd)
        PRTMP_TX_RING pTxRing;
        PRTMP_DMABUF pDmaBuf;
        PNDIS_PACKET pPacket;
-//      PRTMP_REORDERBUF        pReorderBuf;
+/*      PRTMP_REORDERBUF        pReorderBuf; */
 
        DBGPRINT(RT_DEBUG_TRACE, ("--> RTMPAllocTxRxRingMemory\n"));
        do {
-               //
-               // Allocate all ring descriptors, include TxD, RxD, MgmtD.
-               // Although each size is different, to prevent cacheline and alignment
-               // issue, I intentional set them all to 64 bytes.
-               //
+               /* */
+               /* Allocate all ring descriptors, include TxD, RxD, MgmtD. */
+               /* Although each size is different, to prevent cacheline and alignment */
+               /* issue, I intentional set them all to 64 bytes. */
+               /* */
                for (num = 0; num < NUM_OF_TX_RING; num++) {
                        ULONG BufBasePaHigh;
                        ULONG BufBasePaLow;
                        PVOID BufBaseVa;
 
-                       //
-                       // Allocate Tx ring descriptor's memory (5 TX rings = 4 ACs + 1 HCCA)
-                       //
+                       /* */
+                       /* Allocate Tx ring descriptor's memory (5 TX rings = 4 ACs + 1 HCCA) */
+                       /* */
                        pAd->TxDescRing[num].AllocSize =
                            TX_RING_SIZE * TXD_SIZE;
                        RTMP_AllocateTxDescMemory(pAd, num,
@@ -93,11 +93,11 @@ NDIS_STATUS RTMPAllocTxRxRingMemory(IN PRTMP_ADAPTER pAd)
                                Status = NDIS_STATUS_RESOURCES;
                                break;
                        }
-                       // Zero init this memory block
+                       /* Zero init this memory block */
                        NdisZeroMemory(pAd->TxDescRing[num].AllocVa,
                                       pAd->TxDescRing[num].AllocSize);
 
-                       // Save PA & VA for further operation
+                       /* Save PA & VA for further operation */
                        RingBasePaHigh =
                            RTMP_GetPhysicalAddressHigh(pAd->TxDescRing[num].
                                                        AllocPa);
@@ -106,9 +106,9 @@ NDIS_STATUS RTMPAllocTxRxRingMemory(IN PRTMP_ADAPTER pAd)
                                                       AllocPa);
                        RingBaseVa = pAd->TxDescRing[num].AllocVa;
 
-                       //
-                       // Allocate all 1st TXBuf's memory for this TxRing
-                       //
+                       /* */
+                       /* Allocate all 1st TXBuf's memory for this TxRing */
+                       /* */
                        pAd->TxBufSpace[num].AllocSize =
                            TX_RING_SIZE * TX_DMA_1ST_BUFFER_SIZE;
                        RTMP_AllocateFirstTxBuffer(pAd, num,
@@ -125,11 +125,11 @@ NDIS_STATUS RTMPAllocTxRxRingMemory(IN PRTMP_ADAPTER pAd)
                                Status = NDIS_STATUS_RESOURCES;
                                break;
                        }
-                       // Zero init this memory block
+                       /* Zero init this memory block */
                        NdisZeroMemory(pAd->TxBufSpace[num].AllocVa,
                                       pAd->TxBufSpace[num].AllocSize);
 
-                       // Save PA & VA for further operation
+                       /* Save PA & VA for further operation */
                        BufBasePaHigh =
                            RTMP_GetPhysicalAddressHigh(pAd->TxBufSpace[num].
                                                        AllocPa);
@@ -138,14 +138,14 @@ NDIS_STATUS RTMPAllocTxRxRingMemory(IN PRTMP_ADAPTER pAd)
                                                       AllocPa);
                        BufBaseVa = pAd->TxBufSpace[num].AllocVa;
 
-                       //
-                       // Initialize Tx Ring Descriptor and associated buffer memory
-                       //
+                       /* */
+                       /* Initialize Tx Ring Descriptor and associated buffer memory */
+                       /* */
                        pTxRing = &pAd->TxRing[num];
                        for (index = 0; index < TX_RING_SIZE; index++) {
                                pTxRing->Cell[index].pNdisPacket = NULL;
                                pTxRing->Cell[index].pNextNdisPacket = NULL;
-                               // Init Tx Ring Size, Va, Pa variables
+                               /* Init Tx Ring Size, Va, Pa variables */
                                pTxRing->Cell[index].AllocSize = TXD_SIZE;
                                pTxRing->Cell[index].AllocVa = RingBaseVa;
                                RTMP_SetPhysicalAddressHigh(pTxRing->
@@ -155,7 +155,7 @@ NDIS_STATUS RTMPAllocTxRxRingMemory(IN PRTMP_ADAPTER pAd)
                                                           AllocPa,
                                                           RingBasePaLow);
 
-                               // Setup Tx Buffer size & address. only 802.11 header will store in this space
+                               /* Setup Tx Buffer size & address. only 802.11 header will store in this space */
                                pDmaBuf = &pTxRing->Cell[index].DmaBuf;
                                pDmaBuf->AllocSize = TX_DMA_1ST_BUFFER_SIZE;
                                pDmaBuf->AllocVa = BufBaseVa;
@@ -164,16 +164,16 @@ NDIS_STATUS RTMPAllocTxRxRingMemory(IN PRTMP_ADAPTER pAd)
                                RTMP_SetPhysicalAddressLow(pDmaBuf->AllocPa,
                                                           BufBasePaLow);
 
-                               // link the pre-allocated TxBuf to TXD
+                               /* link the pre-allocated TxBuf to TXD */
                                pTxD =
                                    (PTXD_STRUC) pTxRing->Cell[index].AllocVa;
                                pTxD->SDPtr0 = BufBasePaLow;
-                               // advance to next ring descriptor address
+                               /* advance to next ring descriptor address */
                                pTxD->DMADONE = 1;
                                RingBasePaLow += TXD_SIZE;
                                RingBaseVa = (PUCHAR) RingBaseVa + TXD_SIZE;
 
-                               // advance to next TxBuf address
+                               /* advance to next TxBuf address */
                                BufBasePaLow += TX_DMA_1ST_BUFFER_SIZE;
                                BufBaseVa =
                                    (PUCHAR) BufBaseVa + TX_DMA_1ST_BUFFER_SIZE;
@@ -185,9 +185,9 @@ NDIS_STATUS RTMPAllocTxRxRingMemory(IN PRTMP_ADAPTER pAd)
                if (Status == NDIS_STATUS_RESOURCES)
                        break;
 
-               //
-               // Allocate MGMT ring descriptor's memory except Tx ring which allocated eariler
-               //
+               /* */
+               /* Allocate MGMT ring descriptor's memory except Tx ring which allocated eariler */
+               /* */
                pAd->MgmtDescRing.AllocSize = MGMT_RING_SIZE * TXD_SIZE;
                RTMP_AllocateMgmtDescMemory(pAd,
                                            pAd->MgmtDescRing.AllocSize,
@@ -201,24 +201,24 @@ NDIS_STATUS RTMPAllocTxRxRingMemory(IN PRTMP_ADAPTER pAd)
                        Status = NDIS_STATUS_RESOURCES;
                        break;
                }
-               // Zero init this memory block
+               /* Zero init this memory block */
                NdisZeroMemory(pAd->MgmtDescRing.AllocVa,
                               pAd->MgmtDescRing.AllocSize);
 
-               // Save PA & VA for further operation
+               /* Save PA & VA for further operation */
                RingBasePaHigh =
                    RTMP_GetPhysicalAddressHigh(pAd->MgmtDescRing.AllocPa);
                RingBasePaLow =
                    RTMP_GetPhysicalAddressLow(pAd->MgmtDescRing.AllocPa);
                RingBaseVa = pAd->MgmtDescRing.AllocVa;
 
-               //
-               // Initialize MGMT Ring and associated buffer memory
-               //
+               /* */
+               /* Initialize MGMT Ring and associated buffer memory */
+               /* */
                for (index = 0; index < MGMT_RING_SIZE; index++) {
                        pAd->MgmtRing.Cell[index].pNdisPacket = NULL;
                        pAd->MgmtRing.Cell[index].pNextNdisPacket = NULL;
-                       // Init MGMT Ring Size, Va, Pa variables
+                       /* Init MGMT Ring Size, Va, Pa variables */
                        pAd->MgmtRing.Cell[index].AllocSize = TXD_SIZE;
                        pAd->MgmtRing.Cell[index].AllocVa = RingBaseVa;
                        RTMP_SetPhysicalAddressHigh(pAd->MgmtRing.Cell[index].
@@ -226,22 +226,22 @@ NDIS_STATUS RTMPAllocTxRxRingMemory(IN PRTMP_ADAPTER pAd)
                        RTMP_SetPhysicalAddressLow(pAd->MgmtRing.Cell[index].
                                                   AllocPa, RingBasePaLow);
 
-                       // Offset to next ring descriptor address
+                       /* Offset to next ring descriptor address */
                        RingBasePaLow += TXD_SIZE;
                        RingBaseVa = (PUCHAR) RingBaseVa + TXD_SIZE;
 
-                       // link the pre-allocated TxBuf to TXD
+                       /* link the pre-allocated TxBuf to TXD */
                        pTxD = (PTXD_STRUC) pAd->MgmtRing.Cell[index].AllocVa;
                        pTxD->DMADONE = 1;
 
-                       // no pre-allocated buffer required in MgmtRing for scatter-gather case
+                       /* no pre-allocated buffer required in MgmtRing for scatter-gather case */
                }
                DBGPRINT(RT_DEBUG_TRACE,
                         ("MGMT Ring: total %d entry allocated\n", index));
 
-               //
-               // Allocate RX ring descriptor's memory except Tx ring which allocated eariler
-               //
+               /* */
+               /* Allocate RX ring descriptor's memory except Tx ring which allocated eariler */
+               /* */
                pAd->RxDescRing.AllocSize = RX_RING_SIZE * RXD_SIZE;
                RTMP_AllocateRxDescMemory(pAd,
                                          pAd->RxDescRing.AllocSize,
@@ -255,7 +255,7 @@ NDIS_STATUS RTMPAllocTxRxRingMemory(IN PRTMP_ADAPTER pAd)
                        Status = NDIS_STATUS_RESOURCES;
                        break;
                }
-               // Zero init this memory block
+               /* Zero init this memory block */
                NdisZeroMemory(pAd->RxDescRing.AllocVa,
                               pAd->RxDescRing.AllocSize);
 
@@ -263,18 +263,18 @@ NDIS_STATUS RTMPAllocTxRxRingMemory(IN PRTMP_ADAPTER pAd)
                         ("RX DESC %p  size = %ld\n", pAd->RxDescRing.AllocVa,
                          pAd->RxDescRing.AllocSize));
 
-               // Save PA & VA for further operation
+               /* Save PA & VA for further operation */
                RingBasePaHigh =
                    RTMP_GetPhysicalAddressHigh(pAd->RxDescRing.AllocPa);
                RingBasePaLow =
                    RTMP_GetPhysicalAddressLow(pAd->RxDescRing.AllocPa);
                RingBaseVa = pAd->RxDescRing.AllocVa;
 
-               //
-               // Initialize Rx Ring and associated buffer memory
-               //
+               /* */
+               /* Initialize Rx Ring and associated buffer memory */
+               /* */
                for (index = 0; index < RX_RING_SIZE; index++) {
-                       // Init RX Ring Size, Va, Pa variables
+                       /* Init RX Ring Size, Va, Pa variables */
                        pAd->RxRing.Cell[index].AllocSize = RXD_SIZE;
                        pAd->RxRing.Cell[index].AllocVa = RingBaseVa;
                        RTMP_SetPhysicalAddressHigh(pAd->RxRing.Cell[index].
@@ -282,13 +282,13 @@ NDIS_STATUS RTMPAllocTxRxRingMemory(IN PRTMP_ADAPTER pAd)
                        RTMP_SetPhysicalAddressLow(pAd->RxRing.Cell[index].
                                                   AllocPa, RingBasePaLow);
 
-                       //NdisZeroMemory(RingBaseVa, RXD_SIZE);
+                       /*NdisZeroMemory(RingBaseVa, RXD_SIZE); */
 
-                       // Offset to next ring descriptor address
+                       /* Offset to next ring descriptor address */
                        RingBasePaLow += RXD_SIZE;
                        RingBaseVa = (PUCHAR) RingBaseVa + RXD_SIZE;
 
-                       // Setup Rx associated Buffer size & allocate share memory
+                       /* Setup Rx associated Buffer size & allocate share memory */
                        pDmaBuf = &pAd->RxRing.Cell[index].DmaBuf;
                        pDmaBuf->AllocSize = RX_BUFFER_AGGRESIZE;
                        pPacket = RTMP_AllocateRxPacketBuffer(pAd,
@@ -301,17 +301,17 @@ NDIS_STATUS RTMPAllocTxRxRingMemory(IN PRTMP_ADAPTER pAd)
                        /* keep allocated rx packet */
                        pAd->RxRing.Cell[index].pNdisPacket = pPacket;
 
-                       // Error handling
+                       /* Error handling */
                        if (pDmaBuf->AllocVa == NULL) {
                                ErrorValue = ERRLOG_OUT_OF_SHARED_MEMORY;
                                DBGPRINT_ERR(("Failed to allocate RxRing's 1st buffer\n"));
                                Status = NDIS_STATUS_RESOURCES;
                                break;
                        }
-                       // Zero init this memory block
+                       /* Zero init this memory block */
                        NdisZeroMemory(pDmaBuf->AllocVa, pDmaBuf->AllocSize);
 
-                       // Write RxD buffer address & allocated buffer length
+                       /* Write RxD buffer address & allocated buffer length */
                        pRxD = (PRXD_STRUC) pAd->RxRing.Cell[index].AllocVa;
                        pRxD->SDP0 =
                            RTMP_GetPhysicalAddressLow(pDmaBuf->AllocPa);
@@ -333,12 +333,12 @@ NDIS_STATUS RTMPAllocTxRxRingMemory(IN PRTMP_ADAPTER pAd)
        }
 
        if (Status != NDIS_STATUS_SUCCESS) {
-               // Log error inforamtion
+               /* Log error inforamtion */
                NdisWriteErrorLogEntry(pAd->AdapterHandle,
                                       NDIS_ERROR_CODE_OUT_OF_RESOURCES,
                                       1, ErrorValue);
        }
-       // Following code segment get from original func:NICInitTxRxRingAndBacklogQueue(), now should integrate it to here.
+       /* Following code segment get from original func:NICInitTxRxRingAndBacklogQueue(), now should integrate it to here. */
        {
                DBGPRINT(RT_DEBUG_TRACE,
                         ("--> NICInitTxRxRingAndBacklogQueue\n"));
@@ -351,21 +351,21 @@ NDIS_STATUS RTMPAllocTxRxRingMemory(IN PRTMP_ADAPTER pAd)
                RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, GloCfg.word);
 */
 
-               // Initialize all transmit related software queues
+               /* Initialize all transmit related software queues */
                for (index = 0; index < NUM_OF_TX_RING; index++) {
                        InitializeQueueHeader(&pAd->TxSwQueue[index]);
-                       // Init TX rings index pointer
+                       /* Init TX rings index pointer */
                        pAd->TxRing[index].TxSwFreeIdx = 0;
                        pAd->TxRing[index].TxCpuIdx = 0;
-                       //RTMP_IO_WRITE32(pAd, (TX_CTX_IDX0 + i * 0x10) ,  pAd->TxRing[i].TX_CTX_IDX);
+                       /*RTMP_IO_WRITE32(pAd, (TX_CTX_IDX0 + i * 0x10) ,  pAd->TxRing[i].TX_CTX_IDX); */
                }
 
-               // Init RX Ring index pointer
+               /* Init RX Ring index pointer */
                pAd->RxRing.RxSwReadIdx = 0;
                pAd->RxRing.RxCpuIdx = RX_RING_SIZE - 1;
-               //RTMP_IO_WRITE32(pAd, RX_CRX_IDX, pAd->RxRing.RX_CRX_IDX0);
+               /*RTMP_IO_WRITE32(pAd, RX_CRX_IDX, pAd->RxRing.RX_CRX_IDX0); */
 
-               // init MGMT ring index pointer
+               /* init MGMT ring index pointer */
                pAd->MgmtRing.TxSwFreeIdx = 0;
                pAd->MgmtRing.TxCpuIdx = 0;
 
@@ -409,7 +409,7 @@ VOID RTMPRingCleanUp(IN PRTMP_ADAPTER pAd, IN UCHAR RingType)
        int i;
        PRTMP_TX_RING pTxRing;
        unsigned long IrqFlags;
-       //UINT32                        RxSwReadIdx;
+       /*UINT32                        RxSwReadIdx; */
 
        DBGPRINT(RT_DEBUG_TRACE,
                 ("RTMPRingCleanUp(RingIdx=%d, Pending-NDIS=%ld)\n", RingType,
@@ -423,13 +423,13 @@ VOID RTMPRingCleanUp(IN PRTMP_ADAPTER pAd, IN UCHAR RingType)
                pTxRing = &pAd->TxRing[RingType];
 
                RTMP_IRQ_LOCK(&pAd->irq_lock, IrqFlags);
-               // We have to clean all descriptors in case some error happened with reset
-               for (i = 0; i < TX_RING_SIZE; i++)      // We have to scan all TX ring
+               /* We have to clean all descriptors in case some error happened with reset */
+               for (i = 0; i < TX_RING_SIZE; i++)      /* We have to scan all TX ring */
                {
                        pTxD = (PTXD_STRUC) pTxRing->Cell[i].AllocVa;
 
                        pPacket = (PNDIS_PACKET) pTxRing->Cell[i].pNdisPacket;
-                       // release scatter-and-gather NDIS_PACKET
+                       /* release scatter-and-gather NDIS_PACKET */
                        if (pPacket) {
                                RELEASE_NDIS_PACKET(pAd, pPacket,
                                                    NDIS_STATUS_FAILURE);
@@ -438,7 +438,7 @@ VOID RTMPRingCleanUp(IN PRTMP_ADAPTER pAd, IN UCHAR RingType)
 
                        pPacket =
                            (PNDIS_PACKET) pTxRing->Cell[i].pNextNdisPacket;
-                       // release scatter-and-gather NDIS_PACKET
+                       /* release scatter-and-gather NDIS_PACKET */
                        if (pPacket) {
                                RELEASE_NDIS_PACKET(pAd, pPacket,
                                                    NDIS_STATUS_FAILURE);
@@ -467,7 +467,7 @@ VOID RTMPRingCleanUp(IN PRTMP_ADAPTER pAd, IN UCHAR RingType)
                break;
 
        case QID_MGMT:
-               // We have to clean all descriptors in case some error happened with reset
+               /* We have to clean all descriptors in case some error happened with reset */
                NdisAcquireSpinLock(&pAd->MgmtRingLock);
 
                for (i = 0; i < MGMT_RING_SIZE; i++) {
@@ -475,7 +475,7 @@ VOID RTMPRingCleanUp(IN PRTMP_ADAPTER pAd, IN UCHAR RingType)
 
                        pPacket =
                            (PNDIS_PACKET) pAd->MgmtRing.Cell[i].pNdisPacket;
-                       // rlease scatter-and-gather NDIS_PACKET
+                       /* rlease scatter-and-gather NDIS_PACKET */
                        if (pPacket) {
                                PCI_UNMAP_SINGLE(pAd, pTxD->SDPtr0,
                                                 pTxD->SDLen0,
@@ -488,7 +488,7 @@ VOID RTMPRingCleanUp(IN PRTMP_ADAPTER pAd, IN UCHAR RingType)
                        pPacket =
                            (PNDIS_PACKET) pAd->MgmtRing.Cell[i].
                            pNextNdisPacket;
-                       // release scatter-and-gather NDIS_PACKET
+                       /* release scatter-and-gather NDIS_PACKET */
                        if (pPacket) {
                                PCI_UNMAP_SINGLE(pAd, pTxD->SDPtr1,
                                                 pTxD->SDLen1,
@@ -510,7 +510,7 @@ VOID RTMPRingCleanUp(IN PRTMP_ADAPTER pAd, IN UCHAR RingType)
                break;
 
        case QID_RX:
-               // We have to clean all descriptors in case some error happened with reset
+               /* We have to clean all descriptors in case some error happened with reset */
                NdisAcquireSpinLock(&pAd->RxRingLock);
 
                for (i = 0; i < RX_RING_SIZE; i++) {
@@ -541,11 +541,11 @@ VOID RTMPFreeTxRxRingMemory(IN PRTMP_ADAPTER pAd)
        PNDIS_PACKET pPacket;
        unsigned int IrqFlags;
 
-       //POS_COOKIE pObj =(POS_COOKIE) pAd->OS_Cookie;
+       /*POS_COOKIE pObj =(POS_COOKIE) pAd->OS_Cookie; */
 
        DBGPRINT(RT_DEBUG_TRACE, ("--> RTMPFreeTxRxRingMemory\n"));
 
-       // Free TxSwQueue Packet
+       /* Free TxSwQueue Packet */
        for (index = 0; index < NUM_OF_TX_RING; index++) {
                PQUEUE_ENTRY pEntry;
                PNDIS_PACKET pPacket;
@@ -561,7 +561,7 @@ VOID RTMPFreeTxRxRingMemory(IN PRTMP_ADAPTER pAd)
                RTMP_IRQ_UNLOCK(&pAd->irq_lock, IrqFlags);
        }
 
-       // Free Tx Ring Packet
+       /* Free Tx Ring Packet */
        for (index = 0; index < NUM_OF_TX_RING; index++) {
                pTxRing = &pAd->TxRing[index];
 
@@ -576,7 +576,7 @@ VOID RTMPFreeTxRxRingMemory(IN PRTMP_ADAPTER pAd)
                                RELEASE_NDIS_PACKET(pAd, pPacket,
                                                    NDIS_STATUS_SUCCESS);
                        }
-                       //Always assign pNdisPacket as NULL after clear
+                       /*Always assign pNdisPacket as NULL after clear */
                        pTxRing->Cell[j].pNdisPacket = NULL;
 
                        pPacket = pTxRing->Cell[j].pNextNdisPacket;
@@ -588,7 +588,7 @@ VOID RTMPFreeTxRxRingMemory(IN PRTMP_ADAPTER pAd)
                                RELEASE_NDIS_PACKET(pAd, pPacket,
                                                    NDIS_STATUS_SUCCESS);
                        }
-                       //Always assign pNextNdisPacket as NULL after clear
+                       /*Always assign pNextNdisPacket as NULL after clear */
                        pTxRing->Cell[pTxRing->TxSwFreeIdx].pNextNdisPacket =
                            NULL;
 
@@ -729,7 +729,7 @@ BOOLEAN AsicCheckCommanOk(IN PRTMP_ADAPTER pAd, IN UCHAR Command)
        i = 0;
        do {
                RTMP_IO_READ32(pAd, H2M_MAILBOX_CID, &CID);
-               // Find where the command is. Because this is randomly specified by firmware.
+               /* Find where the command is. Because this is randomly specified by firmware. */
                if ((CID & CID0MASK) == Command) {
                        ThisCIDMask = CID0MASK;
                        break;
@@ -748,12 +748,12 @@ BOOLEAN AsicCheckCommanOk(IN PRTMP_ADAPTER pAd, IN UCHAR Command)
                i++;
        } while (i < 200);
 
-       // Get CommandStatus Value
+       /* Get CommandStatus Value */
        RTMP_IO_READ32(pAd, H2M_MAILBOX_STATUS, &CmdStatus);
 
-       // This command's status is at the same position as command. So AND command position's bitmask to read status.
+       /* This command's status is at the same position as command. So AND command position's bitmask to read status. */
        if (i < 200) {
-               // If Status is 1, the comamnd is success.
+               /* If Status is 1, the comamnd is success. */
                if (((CmdStatus & ThisCIDMask) == 0x1)
                    || ((CmdStatus & ThisCIDMask) == 0x100)
                    || ((CmdStatus & ThisCIDMask) == 0x10000)
@@ -773,7 +773,7 @@ BOOLEAN AsicCheckCommanOk(IN PRTMP_ADAPTER pAd, IN UCHAR Command)
                         ("--> AsicCheckCommanFail2 Timeout Command = %d, CmdStatus= 0x%x \n",
                          Command, CmdStatus));
        }
-       // Clear Command and Status.
+       /* Clear Command and Status. */
        RTMP_IO_WRITE32(pAd, H2M_MAILBOX_STATUS, 0xffffffff);
        RTMP_IO_WRITE32(pAd, H2M_MAILBOX_CID, 0xffffffff);
 
@@ -810,10 +810,10 @@ VOID RT28xx_UpdateBeaconToAsic(IN RTMP_ADAPTER * pAd,
                return;
        }
 
-       //if ((pAd->WdsTab.Mode == WDS_BRIDGE_MODE)
-       //      || ((pAd->ApCfg.MBSSID[apidx].MSSIDDev == NULL)
-       //              || !(pAd->ApCfg.MBSSID[apidx].MSSIDDev->flags & IFF_UP))
-       //      )
+       /*if ((pAd->WdsTab.Mode == WDS_BRIDGE_MODE) */
+       /*      || ((pAd->ApCfg.MBSSID[apidx].MSSIDDev == NULL) */
+       /*              || !(pAd->ApCfg.MBSSID[apidx].MSSIDDev->flags & IFF_UP)) */
+       /*      ) */
        if (bBcnReq == FALSE) {
                /* when the ra interface is down, do not send its beacon frame */
                /* clear all zero */
@@ -822,7 +822,7 @@ VOID RT28xx_UpdateBeaconToAsic(IN RTMP_ADAPTER * pAd,
                                        0x00);
        } else {
                ptr = (PUCHAR) & pAd->BeaconTxWI;
-               for (i = 0; i < TXWI_SIZE; i += 4)      // 16-byte TXWI field
+               for (i = 0; i < TXWI_SIZE; i += 4)      /* 16-byte TXWI field */
                {
                        UINT32 longptr =
                            *ptr + (*(ptr + 1) << 8) + (*(ptr + 2) << 16) +
@@ -832,7 +832,7 @@ VOID RT28xx_UpdateBeaconToAsic(IN RTMP_ADAPTER * pAd,
                        ptr += 4;
                }
 
-               // Update CapabilityInfo in Beacon
+               /* Update CapabilityInfo in Beacon */
                for (i = CapInfoPos; i < (CapInfoPos + 2); i++) {
                        RTMP_IO_WRITE8(pAd,
                                       pAd->BeaconOffset[bcn_idx] + TXWI_SIZE +
@@ -871,7 +871,7 @@ VOID RT28xxPciStaAsicForceWakeup(IN PRTMP_ADAPTER pAd, IN BOOLEAN bFromTx)
 
        if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_PCIE_DEVICE)
            && pAd->StaCfg.PSControl.field.EnableNewPS == TRUE) {
-               // Support PCIe Advance Power Save
+               /* Support PCIe Advance Power Save */
                if (bFromTx == TRUE && (pAd->Mlme.bPsPollTimerRunning == TRUE)) {
                        pAd->Mlme.bPsPollTimerRunning = FALSE;
                        RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_WAKEUP);
@@ -885,7 +885,7 @@ VOID RT28xxPciStaAsicForceWakeup(IN PRTMP_ADAPTER pAd, IN BOOLEAN bFromTx)
 
                if (RT28xxPciAsicRadioOn(pAd, DOT11POWERSAVE)) {
 #ifdef PCIE_PS_SUPPORT
-                       // add by johnli, RF power sequence setup, load RF normal operation-mode setup
+                       /* add by johnli, RF power sequence setup, load RF normal operation-mode setup */
                        if ((IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd))
                            && IS_VERSION_AFTER_F(pAd)) {
                                RTMP_CHIP_OP *pChipOps = &pAd->chipOps;
@@ -894,16 +894,16 @@ VOID RT28xxPciStaAsicForceWakeup(IN PRTMP_ADAPTER pAd, IN BOOLEAN bFromTx)
                                        pChipOps->
                                            AsicReverseRfFromSleepMode(pAd);
                        } else
-#endif // PCIE_PS_SUPPORT //
+#endif /* PCIE_PS_SUPPORT // */
                        {
-                               // end johnli
-                               // In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again.
+                               /* end johnli */
+                               /* In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again. */
                                if (INFRA_ON(pAd)
                                    && (pAd->CommonCfg.CentralChannel !=
                                        pAd->CommonCfg.Channel)
                                    && (pAd->MlmeAux.HtCapability.HtCapInfo.
                                        ChannelWidth == BW_40)) {
-                                       // Must using 40MHz.
+                                       /* Must using 40MHz. */
                                        AsicSwitchChannel(pAd,
                                                          pAd->CommonCfg.
                                                          CentralChannel,
@@ -912,7 +912,7 @@ VOID RT28xxPciStaAsicForceWakeup(IN PRTMP_ADAPTER pAd, IN BOOLEAN bFromTx)
                                                        pAd->CommonCfg.
                                                        CentralChannel);
                                } else {
-                                       // Must using 20MHz.
+                                       /* Must using 20MHz. */
                                        AsicSwitchChannel(pAd,
                                                          pAd->CommonCfg.
                                                          Channel, FALSE);
@@ -922,8 +922,8 @@ VOID RT28xxPciStaAsicForceWakeup(IN PRTMP_ADAPTER pAd, IN BOOLEAN bFromTx)
                        }
                }
 #ifdef PCIE_PS_SUPPORT
-               // 3090 MCU Wakeup command needs more time to be stable.
-               // Before stable, don't issue other MCU command to prevent from firmware error.
+               /* 3090 MCU Wakeup command needs more time to be stable. */
+               /* Before stable, don't issue other MCU command to prevent from firmware error. */
                if (((IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd))
                     && IS_VERSION_AFTER_F(pAd)) && IS_VERSION_AFTER_F(pAd)
                    && (pAd->StaCfg.PSControl.field.rt30xxPowerMode == 3)
@@ -934,9 +934,9 @@ VOID RT28xxPciStaAsicForceWakeup(IN PRTMP_ADAPTER pAd, IN BOOLEAN bFromTx)
                        pAd->brt30xxBanMcuCmd = FALSE;
                        RTMP_SEM_UNLOCK(&pAd->McuCmdLock);
                }
-#endif // PCIE_PS_SUPPORT //
+#endif /* PCIE_PS_SUPPORT // */
        } else {
-               // PCI, 2860-PCIe
+               /* PCI, 2860-PCIe */
                DBGPRINT(RT_DEBUG_TRACE,
                         ("<==RT28xxPciStaAsicForceWakeup::Original PCI Power Saving\n"));
                AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x02);
@@ -968,8 +968,8 @@ VOID RT28xxPciStaAsicSleepThenAutoWakeup(IN PRTMP_ADAPTER pAd,
                }
 
                NdisGetSystemUpTime(&Now);
-               // If last send NULL fram time is too close to this receiving beacon (within 8ms), don't go to sleep for this DTM.
-               // Because Some AP can't queuing outgoing frames immediately.
+               /* If last send NULL fram time is too close to this receiving beacon (within 8ms), don't go to sleep for this DTM. */
+               /* Because Some AP can't queuing outgoing frames immediately. */
                if (((pAd->Mlme.LastSendNULLpsmTime + 8) >= Now)
                    && (pAd->Mlme.LastSendNULLpsmTime <= Now)) {
                        DBGPRINT(RT_DEBUG_TRACE,
@@ -995,11 +995,11 @@ VOID RT28xxPciStaAsicSleepThenAutoWakeup(IN PRTMP_ADAPTER pAd,
                        OPSTATUS_SET_FLAG(pAd, fOP_STATUS_DOZE);
        } else {
                AUTO_WAKEUP_STRUC AutoWakeupCfg;
-               // we have decided to SLEEP, so at least do it for a BEACON period.
+               /* we have decided to SLEEP, so at least do it for a BEACON period. */
                if (TbttNumToNextWakeUp == 0)
                        TbttNumToNextWakeUp = 1;
 
-               //RTMP_IO_WRITE32(pAd, INT_MASK_CSR, AutoWakeupInt);
+               /*RTMP_IO_WRITE32(pAd, INT_MASK_CSR, AutoWakeupInt); */
 
                AutoWakeupCfg.word = 0;
                RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
@@ -1007,7 +1007,7 @@ VOID RT28xxPciStaAsicSleepThenAutoWakeup(IN PRTMP_ADAPTER pAd,
                AutoWakeupCfg.field.EnableAutoWakeup = 1;
                AutoWakeupCfg.field.AutoLeadTime = 5;
                RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
-               AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x00);      // send POWER-SAVE command to MCU. Timeout 40us.
+               AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x00);      /* send POWER-SAVE command to MCU. Timeout 40us. */
                OPSTATUS_SET_FLAG(pAd, fOP_STATUS_DOZE);
                DBGPRINT(RT_DEBUG_TRACE,
                         ("<-- %s, TbttNumToNextWakeUp=%d \n", __func__,
@@ -1031,8 +1031,8 @@ VOID PsPollWakeExec(IN PVOID SystemSpecific1,
        pAd->Mlme.bPsPollTimerRunning = FALSE;
        RTMP_INT_UNLOCK(&pAd->irq_lock, flags);
 #ifdef PCIE_PS_SUPPORT
-       // For rt30xx power solution 3, Use software timer to wake up in psm. So call
-       // AsicForceWakeup here instead of handling twakeup interrupt.
+       /* For rt30xx power solution 3, Use software timer to wake up in psm. So call */
+       /* AsicForceWakeup here instead of handling twakeup interrupt. */
        if (((IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd))
             && IS_VERSION_AFTER_F(pAd))
            && (pAd->StaCfg.PSControl.field.rt30xxPowerMode == 3)
@@ -1041,7 +1041,7 @@ VOID PsPollWakeExec(IN PVOID SystemSpecific1,
                         ("<--PsPollWakeExec::3090 calls AsicForceWakeup(pAd, DOT11POWERSAVE) in advance \n"));
                AsicForceWakeup(pAd, DOT11POWERSAVE);
        }
-#endif // PCIE_PS_SUPPORT //
+#endif /* PCIE_PS_SUPPORT // */
 }
 
 VOID RadioOnExec(IN PVOID SystemSpecific1,
@@ -1056,12 +1056,12 @@ VOID RadioOnExec(IN PVOID SystemSpecific1,
        if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) {
                DBGPRINT(RT_DEBUG_TRACE,
                         ("-->RadioOnExec() return on fOP_STATUS_DOZE == TRUE; \n"));
-//KH Debug: Add the compile flag "RT2860 and condition
+/*KH Debug: Add the compile flag "RT2860 and condition */
 #ifdef RTMP_PCI_SUPPORT
                if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_PCIE_DEVICE)
                    && pAd->StaCfg.PSControl.field.EnableNewPS == TRUE)
                        RTMPSetTimer(&pAd->Mlme.RadioOnOffTimer, 10);
-#endif // RTMP_PCI_SUPPORT //
+#endif /* RTMP_PCI_SUPPORT // */
                return;
        }
 
@@ -1072,17 +1072,17 @@ VOID RadioOnExec(IN PVOID SystemSpecific1,
                if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_PCIE_DEVICE)
                    && pAd->StaCfg.PSControl.field.EnableNewPS == TRUE)
                        RTMPSetTimer(&pAd->Mlme.RadioOnOffTimer, 10);
-#endif // RTMP_PCI_SUPPORT //
+#endif /* RTMP_PCI_SUPPORT // */
                return;
        }
-//KH Debug: need to check. I add the compile flag "CONFIG_STA_SUPPORT" to enclose the following codes.
+/*KH Debug: need to check. I add the compile flag "CONFIG_STA_SUPPORT" to enclose the following codes. */
 #ifdef RTMP_PCI_SUPPORT
        if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_PCIE_DEVICE)
            && pAd->StaCfg.PSControl.field.EnableNewPS == TRUE) {
                pAd->Mlme.bPsPollTimerRunning = FALSE;
                RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled);
        }
-#endif // RTMP_PCI_SUPPORT //
+#endif /* RTMP_PCI_SUPPORT // */
        if (pAd->StaCfg.bRadio == TRUE) {
                pAd->bPCIclkOff = FALSE;
                RTMPRingCleanUp(pAd, QID_AC_BK);
@@ -1092,42 +1092,42 @@ VOID RadioOnExec(IN PVOID SystemSpecific1,
                RTMPRingCleanUp(pAd, QID_MGMT);
                RTMPRingCleanUp(pAd, QID_RX);
 
-               // 2. Send wake up command.
+               /* 2. Send wake up command. */
                AsicSendCommandToMcu(pAd, 0x31, PowerWakeCID, 0x00, 0x02);
-               // 2-1. wait command ok.
+               /* 2-1. wait command ok. */
                AsicCheckCommanOk(pAd, PowerWakeCID);
 
-               // When PCI clock is off, don't want to service interrupt. So when back to clock on, enable interrupt.
-               //RTMP_IO_WRITE32(pAd, INT_MASK_CSR, (DELAYINTMASK|RxINT));
+               /* When PCI clock is off, don't want to service interrupt. So when back to clock on, enable interrupt. */
+               /*RTMP_IO_WRITE32(pAd, INT_MASK_CSR, (DELAYINTMASK|RxINT)); */
                RTMP_ASIC_INTERRUPT_ENABLE(pAd);
 
-               // 3. Enable Tx DMA.
+               /* 3. Enable Tx DMA. */
                RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &DmaCfg.word);
                DmaCfg.field.EnableTxDMA = 1;
                RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, DmaCfg.word);
 
-               // In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again.
+               /* In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again. */
                if (INFRA_ON(pAd)
                    && (pAd->CommonCfg.CentralChannel != pAd->CommonCfg.Channel)
                    && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth ==
                        BW_40)) {
-                       // Must using 40MHz.
+                       /* Must using 40MHz. */
                        AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel,
                                          FALSE);
                        AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
                } else {
-                       // Must using 20MHz.
+                       /* Must using 20MHz. */
                        AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
                        AsicLockChannel(pAd, pAd->CommonCfg.Channel);
                }
 
-//KH Debug:The following codes should be enclosed by RT3090 compile flag
+/*KH Debug:The following codes should be enclosed by RT3090 compile flag */
                if (pChipOps->AsicReverseRfFromSleepMode)
                        pChipOps->AsicReverseRfFromSleepMode(pAd);
 
 #ifdef PCIE_PS_SUPPORT
-// 3090 MCU Wakeup command needs more time to be stable.
-// Before stable, don't issue other MCU command to prevent from firmware error.
+/* 3090 MCU Wakeup command needs more time to be stable. */
+/* Before stable, don't issue other MCU command to prevent from firmware error. */
                if ((IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd))
                    && IS_VERSION_AFTER_F(pAd)
                    && (pAd->StaCfg.PSControl.field.rt30xxPowerMode == 3)
@@ -1136,12 +1136,12 @@ VOID RadioOnExec(IN PVOID SystemSpecific1,
                        pAd->brt30xxBanMcuCmd = FALSE;
                        RTMP_SEM_UNLOCK(&pAd->McuCmdLock);
                }
-#endif // PCIE_PS_SUPPORT //
+#endif /* PCIE_PS_SUPPORT // */
 
-               // Clear Radio off flag
+               /* Clear Radio off flag */
                RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
 
-               // Set LED
+               /* Set LED */
                RTMPSetLED(pAd, LED_RADIO_ON);
 
                if (pAd->StaCfg.Psm == PWR_ACTIVE) {
@@ -1166,9 +1166,9 @@ VOID RadioOnExec(IN PVOID SystemSpecific1,
  */
 BOOLEAN RT28xxPciAsicRadioOn(IN PRTMP_ADAPTER pAd, IN UCHAR Level)
 {
-       //WPDMA_GLO_CFG_STRUC       DmaCfg;
+       /*WPDMA_GLO_CFG_STRUC       DmaCfg; */
        BOOLEAN Cancelled;
-       //UINT32                        MACValue;
+       /*UINT32                        MACValue; */
 
        if (pAd->OpMode == OPMODE_AP && Level == DOT11POWERSAVE)
                return FALSE;
@@ -1181,8 +1181,8 @@ BOOLEAN RT28xxPciAsicRadioOn(IN PRTMP_ADAPTER pAd, IN UCHAR Level)
                if ((pAd->StaCfg.PSControl.field.EnableNewPS == TRUE &&
                     (Level == GUIRADIO_OFF || Level == GUI_IDLE_POWER_SAVE)) ||
                    RTMP_TEST_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND)) {
-                       // Some chips don't need to delay 6ms, so copy RTMPPCIePowerLinkCtrlRestore
-                       // return condition here.
+                       /* Some chips don't need to delay 6ms, so copy RTMPPCIePowerLinkCtrlRestore */
+                       /* return condition here. */
                        /*
                           if (((pAd->MACVersion&0xffff0000) != 0x28600000)
                           && ((pAd->DeviceID == NIC2860_PCIe_DEVICE_ID)
@@ -1191,7 +1191,7 @@ BOOLEAN RT28xxPciAsicRadioOn(IN PRTMP_ADAPTER pAd, IN UCHAR Level)
                        {
                                DBGPRINT(RT_DEBUG_TRACE,
                                         ("RT28xxPciAsicRadioOn ()\n"));
-                               // 1. Set PCI Link Control in Configuration Space.
+                               /* 1. Set PCI Link Control in Configuration Space. */
                                RTMPPCIeLinkCtrlValueRestore(pAd,
                                                             RESTORE_WAKEUP);
                                RTMPusecDelay(6000);
@@ -1204,16 +1204,16 @@ BOOLEAN RT28xxPciAsicRadioOn(IN PRTMP_ADAPTER pAd, IN UCHAR Level)
              && IS_VERSION_AFTER_F(pAd)
              && (pAd->StaCfg.PSControl.field.rt30xxPowerMode == 3)
              && (pAd->StaCfg.PSControl.field.EnableNewPS == TRUE))))
-#endif // PCIE_PS_SUPPORT //
+#endif /* PCIE_PS_SUPPORT // */
        {
                pAd->bPCIclkOff = FALSE;
                DBGPRINT(RT_DEBUG_TRACE,
                         ("PSM :309xbPCIclkOff == %d\n", pAd->bPCIclkOff));
        }
-       // 2. Send wake up command.
+       /* 2. Send wake up command. */
        AsicSendCommandToMcu(pAd, 0x31, PowerWakeCID, 0x00, 0x02);
        pAd->bPCIclkOff = FALSE;
-       // 2-1. wait command ok.
+       /* 2-1. wait command ok. */
        AsicCheckCommanOk(pAd, PowerWakeCID);
        RTMP_ASIC_INTERRUPT_ENABLE(pAd);
 
@@ -1221,14 +1221,14 @@ BOOLEAN RT28xxPciAsicRadioOn(IN PRTMP_ADAPTER pAd, IN UCHAR Level)
        if (Level == GUI_IDLE_POWER_SAVE) {
 #ifdef  PCIE_PS_SUPPORT
 
-               // add by johnli, RF power sequence setup, load RF normal operation-mode setup
+               /* add by johnli, RF power sequence setup, load RF normal operation-mode setup */
                if ((IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd))) {
                        RTMP_CHIP_OP *pChipOps = &pAd->chipOps;
 
                        if (pChipOps->AsicReverseRfFromSleepMode)
                                pChipOps->AsicReverseRfFromSleepMode(pAd);
-                       // 3090 MCU Wakeup command needs more time to be stable.
-                       // Before stable, don't issue other MCU command to prevent from firmware error.
+                       /* 3090 MCU Wakeup command needs more time to be stable. */
+                       /* Before stable, don't issue other MCU command to prevent from firmware error. */
                        if ((IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd))
                            && IS_VERSION_AFTER_F(pAd)
                            && (pAd->StaCfg.PSControl.field.rt30xxPowerMode ==
@@ -1240,17 +1240,17 @@ BOOLEAN RT28xxPciAsicRadioOn(IN PRTMP_ADAPTER pAd, IN UCHAR Level)
                                RTMP_SEM_UNLOCK(&pAd->McuCmdLock);
                        }
                } else
-                       // end johnli
-#endif // PCIE_PS_SUPPORT //
+                       /* end johnli */
+#endif /* PCIE_PS_SUPPORT // */
                {
-                       // In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again.
+                       /* In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again. */
                        {
                                if (INFRA_ON(pAd)
                                    && (pAd->CommonCfg.CentralChannel !=
                                        pAd->CommonCfg.Channel)
                                    && (pAd->MlmeAux.HtCapability.HtCapInfo.
                                        ChannelWidth == BW_40)) {
-                                       // Must using 40MHz.
+                                       /* Must using 40MHz. */
                                        AsicSwitchChannel(pAd,
                                                          pAd->CommonCfg.
                                                          CentralChannel,
@@ -1259,7 +1259,7 @@ BOOLEAN RT28xxPciAsicRadioOn(IN PRTMP_ADAPTER pAd, IN UCHAR Level)
                                                        pAd->CommonCfg.
                                                        CentralChannel);
                                } else {
-                                       // Must using 20MHz.
+                                       /* Must using 20MHz. */
                                        AsicSwitchChannel(pAd,
                                                          pAd->CommonCfg.
                                                          Channel, FALSE);
@@ -1304,7 +1304,7 @@ BOOLEAN RT28xxPciAsicRadioOff(IN PRTMP_ADAPTER pAd,
        if (pAd->OpMode == OPMODE_AP && Level == DOT11POWERSAVE)
                return FALSE;
 
-       // Check Rx DMA busy status, if more than half is occupied, give up this radio off.
+       /* Check Rx DMA busy status, if more than half is occupied, give up this radio off. */
        RTMP_IO_READ32(pAd, RX_DRX_IDX, &RxDmaIdx);
        RTMP_IO_READ32(pAd, RX_CRX_IDX, &RxCpuIdx);
        if ((RxDmaIdx > RxCpuIdx) && ((RxDmaIdx - RxCpuIdx) > RX_RING_SIZE / 3)) {
@@ -1319,8 +1319,8 @@ BOOLEAN RT28xxPciAsicRadioOff(IN PRTMP_ADAPTER pAd,
                          RxCpuIdx, RxDmaIdx));
                return FALSE;
        }
-       // Once go into this function, disable tx because don't want too many packets in queue to prevent HW stops.
-       //pAd->bPCIclkOffDisableTx = TRUE;
+       /* Once go into this function, disable tx because don't want too many packets in queue to prevent HW stops. */
+       /*pAd->bPCIclkOffDisableTx = TRUE; */
        RTMP_SET_PSFLAG(pAd, fRTMP_PS_DISABLE_TX);
        if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_PCIE_DEVICE)
            && pAd->OpMode == OPMODE_STA
@@ -1331,15 +1331,15 @@ BOOLEAN RT28xxPciAsicRadioOff(IN PRTMP_ADAPTER pAd,
                if (Level == DOT11POWERSAVE) {
                        RTMP_IO_READ32(pAd, TBTT_TIMER, &TbTTTime);
                        TbTTTime &= 0x1ffff;
-                       // 00. check if need to do sleep in this DTIM period.   If next beacon will arrive within 30ms , ...doesn't necessarily sleep.
-                       // TbTTTime uint = 64us, LEAD_TIME unit = 1024us, PsPollTime unit = 1ms
+                       /* 00. check if need to do sleep in this DTIM period.   If next beacon will arrive within 30ms , ...doesn't necessarily sleep. */
+                       /* TbTTTime uint = 64us, LEAD_TIME unit = 1024us, PsPollTime unit = 1ms */
                        if (((64 * TbTTTime) < ((LEAD_TIME * 1024) + 40000))
                            && (TbttNumToNextWakeUp == 0)) {
                                DBGPRINT(RT_DEBUG_TRACE,
                                         ("TbTTTime = 0x%x , give up this sleep. \n",
                                          TbTTTime));
                                OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE);
-                               //pAd->bPCIclkOffDisableTx = FALSE;
+                               /*pAd->bPCIclkOffDisableTx = FALSE; */
                                RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_DISABLE_TX);
                                return FALSE;
                        } else {
@@ -1355,7 +1355,7 @@ BOOLEAN RT28xxPciAsicRadioOff(IN PRTMP_ADAPTER pAd,
                                        EnableNewPS == TRUE)) {
                                        PsPollTime -= 5;
                                } else
-#endif // PCIE_PS_SUPPORT //
+#endif /* PCIE_PS_SUPPORT // */
                                        PsPollTime -= 3;
 
                                BeaconPeriodTime =
@@ -1379,52 +1379,52 @@ BOOLEAN RT28xxPciAsicRadioOff(IN PRTMP_ADAPTER pAd,
 
        RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF);
 
-       // Set to 1R.
+       /* Set to 1R. */
        if (pAd->Antenna.field.RxPath > 1 && pAd->OpMode == OPMODE_STA) {
                tempBBP_R3 = (pAd->StaCfg.BBPR3 & 0xE7);
                RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, tempBBP_R3);
        }
-       // In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again.
+       /* In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again. */
        if ((INFRA_ON(pAd) || pAd->OpMode == OPMODE_AP)
            && (pAd->CommonCfg.CentralChannel != pAd->CommonCfg.Channel)
            && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40)) {
-               // Must using 40MHz.
+               /* Must using 40MHz. */
                AsicTurnOffRFClk(pAd, pAd->CommonCfg.CentralChannel);
        } else {
-               // Must using 20MHz.
+               /* Must using 20MHz. */
                AsicTurnOffRFClk(pAd, pAd->CommonCfg.Channel);
        }
 
        if (Level != RTMP_HALT) {
-               // Change Interrupt bitmask.
-               // When PCI clock is off, don't want to service interrupt.
+               /* Change Interrupt bitmask. */
+               /* When PCI clock is off, don't want to service interrupt. */
                RTMP_IO_WRITE32(pAd, INT_MASK_CSR, AutoWakeupInt);
        } else {
                RTMP_ASIC_INTERRUPT_DISABLE(pAd);
        }
 
        RTMP_IO_WRITE32(pAd, RX_CRX_IDX, pAd->RxRing.RxCpuIdx);
-       //  2. Send Sleep command
+       /*  2. Send Sleep command */
        RTMP_IO_WRITE32(pAd, H2M_MAILBOX_STATUS, 0xffffffff);
        RTMP_IO_WRITE32(pAd, H2M_MAILBOX_CID, 0xffffffff);
-       // send POWER-SAVE command to MCU. high-byte = 1 save power as much as possible. high byte = 0 save less power
+       /* send POWER-SAVE command to MCU. high-byte = 1 save power as much as possible. high byte = 0 save less power */
        AsicSendCommandToMcu(pAd, 0x30, PowerSafeCID, 0xff, 0x1);
-       //  2-1. Wait command success
-       // Status = 1 : success, Status = 2, already sleep, Status = 3, Maybe MAC is busy so can't finish this task.
+       /*  2-1. Wait command success */
+       /* Status = 1 : success, Status = 2, already sleep, Status = 3, Maybe MAC is busy so can't finish this task. */
        brc = AsicCheckCommanOk(pAd, PowerSafeCID);
 
-       //  3. After 0x30 command is ok, send radio off command. lowbyte = 0 for power safe.
-       // If 0x30 command is not ok this time, we can ignore 0x35 command. It will make sure not cause firmware'r problem.
+       /*  3. After 0x30 command is ok, send radio off command. lowbyte = 0 for power safe. */
+       /* If 0x30 command is not ok this time, we can ignore 0x35 command. It will make sure not cause firmware'r problem. */
        if ((Level == DOT11POWERSAVE) && (brc == TRUE)) {
-               AsicSendCommandToMcu(pAd, 0x35, PowerRadioOffCID, 0, 0x00);     // lowbyte = 0 means to do power safe, NOT turn off radio.
-               //  3-1. Wait command success
+               AsicSendCommandToMcu(pAd, 0x35, PowerRadioOffCID, 0, 0x00);     /* lowbyte = 0 means to do power safe, NOT turn off radio. */
+               /*  3-1. Wait command success */
                AsicCheckCommanOk(pAd, PowerRadioOffCID);
        } else if (brc == TRUE) {
-               AsicSendCommandToMcu(pAd, 0x35, PowerRadioOffCID, 1, 0x00);     // lowbyte = 0 means to do power safe, NOT turn off radio.
-               //  3-1. Wait command success
+               AsicSendCommandToMcu(pAd, 0x35, PowerRadioOffCID, 1, 0x00);     /* lowbyte = 0 means to do power safe, NOT turn off radio. */
+               /*  3-1. Wait command success */
                AsicCheckCommanOk(pAd, PowerRadioOffCID);
        }
-       // 1. Wait DMA not busy
+       /* 1. Wait DMA not busy */
        i = 0;
        do {
                RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &DmaCfg.word);
@@ -1446,10 +1446,10 @@ BOOLEAN RT28xxPciAsicRadioOff(IN PRTMP_ADAPTER pAd,
           pAd->CheckDmaBusyCount = 0;
           }
         */
-//KH Debug:My original codes have the follwoing codes, but currecnt codes do not have it.
-// Disable for stability. If PCIE Link Control is modified for advance power save, re-covery this code segment.
+/*KH Debug:My original codes have the follwoing codes, but currecnt codes do not have it. */
+/* Disable for stability. If PCIE Link Control is modified for advance power save, re-covery this code segment. */
        RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0x1280);
-//OPSTATUS_SET_FLAG(pAd, fOP_STATUS_CLKSELECT_40MHZ);
+/*OPSTATUS_SET_FLAG(pAd, fOP_STATUS_CLKSELECT_40MHZ); */
 
 #ifdef PCIE_PS_SUPPORT
        if ((IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd))
@@ -1460,39 +1460,39 @@ BOOLEAN RT28xxPciAsicRadioOff(IN PRTMP_ADAPTER pAd,
                         ("RT28xxPciAsicRadioOff::3090 return to skip the following TbttNumToNextWakeUp setting for 279x\n"));
                pAd->bPCIclkOff = TRUE;
                RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_DISABLE_TX);
-               // For this case, doesn't need to below actions, so return here.
+               /* For this case, doesn't need to below actions, so return here. */
                return brc;
        }
-#endif // PCIE_PS_SUPPORT //
+#endif /* PCIE_PS_SUPPORT // */
 
        if (Level == DOT11POWERSAVE) {
                AUTO_WAKEUP_STRUC AutoWakeupCfg;
-               //RTMPSetTimer(&pAd->Mlme.PsPollTimer, 90);
+               /*RTMPSetTimer(&pAd->Mlme.PsPollTimer, 90); */
 
-               // we have decided to SLEEP, so at least do it for a BEACON period.
+               /* we have decided to SLEEP, so at least do it for a BEACON period. */
                if (TbttNumToNextWakeUp == 0)
                        TbttNumToNextWakeUp = 1;
 
                AutoWakeupCfg.word = 0;
                RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
 
-               // 1. Set auto wake up timer.
+               /* 1. Set auto wake up timer. */
                AutoWakeupCfg.field.NumofSleepingTbtt = TbttNumToNextWakeUp - 1;
                AutoWakeupCfg.field.EnableAutoWakeup = 1;
                AutoWakeupCfg.field.AutoLeadTime = LEAD_TIME;
                RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
        }
-       //  4-1. If it's to disable our device. Need to restore PCI Configuration Space to its original value.
+       /*  4-1. If it's to disable our device. Need to restore PCI Configuration Space to its original value. */
        if (Level == RTMP_HALT && pAd->OpMode == OPMODE_STA) {
                if ((brc == TRUE) && (i < 50))
                        RTMPPCIeLinkCtrlSetting(pAd, 1);
        }
-       //  4. Set PCI configuration Space Link Comtrol fields.  Only Radio Off needs to call this function
+       /*  4. Set PCI configuration Space Link Comtrol fields.  Only Radio Off needs to call this function */
        else if (pAd->OpMode == OPMODE_STA) {
                if ((brc == TRUE) && (i < 50))
                        RTMPPCIeLinkCtrlSetting(pAd, 3);
        }
-       //pAd->bPCIclkOffDisableTx = FALSE;
+       /*pAd->bPCIclkOffDisableTx = FALSE; */
        RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_DISABLE_TX);
        return TRUE;
 }
@@ -1511,7 +1511,7 @@ VOID RT28xxPciMlmeRadioOn(IN PRTMP_ADAPTER pAd)
                                            || pAd->StaCfg.PSControl.field.
                                            EnableNewPS == FALSE))) {
                RT28xxPciAsicRadioOn(pAd, GUI_IDLE_POWER_SAVE);
-               //NICResetFromError(pAd);
+               /*NICResetFromError(pAd); */
 
                RTMPRingCleanUp(pAd, QID_AC_BK);
                RTMPRingCleanUp(pAd, QID_AC_BE);
@@ -1520,15 +1520,15 @@ VOID RT28xxPciMlmeRadioOn(IN PRTMP_ADAPTER pAd)
                RTMPRingCleanUp(pAd, QID_MGMT);
                RTMPRingCleanUp(pAd, QID_RX);
 
-               // Enable Tx/Rx
+               /* Enable Tx/Rx */
                RTMPEnableRxTx(pAd);
 
-               // Clear Radio off flag
+               /* Clear Radio off flag */
                RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
 
                RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF);
 
-               // Set LED
+               /* Set LED */
                RTMPSetLED(pAd, LED_RADIO_ON);
        }
 
@@ -1553,7 +1553,7 @@ VOID RT28xxPciMlmeRadioOFF(IN PRTMP_ADAPTER pAd)
        if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF))
                return;
 
-       // Link down first if any association exists
+       /* Link down first if any association exists */
        if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) {
                if (INFRA_ON(pAd) || ADHOC_ON(pAd)) {
                        MLME_DISASSOC_REQ_STRUCT DisReq;
@@ -1584,7 +1584,7 @@ VOID RT28xxPciMlmeRadioOFF(IN PRTMP_ADAPTER pAd)
 
        DBGPRINT(RT_DEBUG_TRACE, ("%s===>\n", __func__));
 
-       // Set Radio off flag
+       /* Set Radio off flag */
        RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
 
        {
@@ -1597,13 +1597,13 @@ VOID RT28xxPciMlmeRadioOFF(IN PRTMP_ADAPTER pAd)
                                RTMP_CLEAR_FLAG(pAd,
                                                fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
                        }
-                       // If during power safe mode.
+                       /* If during power safe mode. */
                        if (pAd->StaCfg.bRadio == TRUE) {
                                DBGPRINT(RT_DEBUG_TRACE,
                                         ("-->MlmeRadioOff() return on bRadio == TRUE; \n"));
                                return;
                        }
-                       // Always radio on since the NIC needs to set the MCU command (LED_RADIO_OFF).
+                       /* Always radio on since the NIC needs to set the MCU command (LED_RADIO_OFF). */
                        if (IDLE_ON(pAd) &&
                            (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF)))
                        {
@@ -1618,12 +1618,12 @@ VOID RT28xxPciMlmeRadioOFF(IN PRTMP_ADAPTER pAd)
                                                &Cancelled);
                        }
                }
-               // Link down first if any association exists
+               /* Link down first if any association exists */
                if (INFRA_ON(pAd) || ADHOC_ON(pAd))
                        LinkDown(pAd, FALSE);
                RTMPusecDelay(10000);
-               //==========================================
-               // Clean up old bss table
+               /*========================================== */
+               /* Clean up old bss table */
                BssTableInit(&pAd->ScanTab);
 
                /*
@@ -1635,12 +1635,12 @@ VOID RT28xxPciMlmeRadioOFF(IN PRTMP_ADAPTER pAd)
                 */
        }
 
-       // Set LED.Move to here for fixing LED bug. This flag must be called after LinkDown
+       /* Set LED.Move to here for fixing LED bug. This flag must be called after LinkDown */
        RTMPSetLED(pAd, LED_RADIO_OFF);
 
-//KH Debug:All PCIe devices need to use timer to execute radio off function, or the PCIe&&EnableNewPS needs.
-//KH Ans:It is right, because only when the PCIe and EnableNewPs is true, we need to delay the RadioOffTimer
-//to avoid the deadlock with PCIe Power saving function.
+/*KH Debug:All PCIe devices need to use timer to execute radio off function, or the PCIe&&EnableNewPS needs. */
+/*KH Ans:It is right, because only when the PCIe and EnableNewPs is true, we need to delay the RadioOffTimer */
+/*to avoid the deadlock with PCIe Power saving function. */
        if (pAd->OpMode == OPMODE_STA &&
            OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_PCIE_DEVICE) &&
            pAd->StaCfg.PSControl.field.EnableNewPS == TRUE) {
@@ -1658,4 +1658,4 @@ VOID RT28xxPciMlmeRadioOFF(IN PRTMP_ADAPTER pAd)
 */
 }
 
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
index e537455..70e47db 100644 (file)
@@ -57,22 +57,22 @@ NDIS_STATUS NICInitRecv(IN PRTMP_ADAPTER pAd)
        DBGPRINT(RT_DEBUG_TRACE, ("--> NICInitRecv\n"));
        pObj = pObj;
 
-       //InterlockedExchange(&pAd->PendingRx, 0);
+       /*InterlockedExchange(&pAd->PendingRx, 0); */
        pAd->PendingRx = 0;
-       pAd->NextRxBulkInReadIndex = 0; // Next Rx Read index
-       pAd->NextRxBulkInIndex = 0;     //RX_RING_SIZE -1; // Rx Bulk pointer
+       pAd->NextRxBulkInReadIndex = 0; /* Next Rx Read index */
+       pAd->NextRxBulkInIndex = 0;     /*RX_RING_SIZE -1; // Rx Bulk pointer */
        pAd->NextRxBulkInPosition = 0;
 
        for (i = 0; i < (RX_RING_SIZE); i++) {
                PRX_CONTEXT pRxContext = &(pAd->RxContext[i]);
 
-               //Allocate URB
+               /*Allocate URB */
                pRxContext->pUrb = RTUSB_ALLOC_URB(0);
                if (pRxContext->pUrb == NULL) {
                        Status = NDIS_STATUS_RESOURCES;
                        goto out1;
                }
-               // Allocate transfer buffer
+               /* Allocate transfer buffer */
                pRxContext->TransferBuffer =
                    RTUSB_URB_ALLOC_BUFFER(pObj->pUsb_Dev, MAX_RXBULK_SIZE,
                                           &pRxContext->data_dma);
@@ -88,7 +88,7 @@ NDIS_STATUS NICInitRecv(IN PRTMP_ADAPTER pAd)
                pRxContext->InUse = FALSE;
                pRxContext->IRPPending = FALSE;
                pRxContext->Readable = FALSE;
-               //pRxContext->ReorderInUse = FALSE;
+               /*pRxContext->ReorderInUse = FALSE; */
                pRxContext->bRxHandling = FALSE;
                pRxContext->BulkInOffset = 0;
        }
@@ -165,44 +165,44 @@ NDIS_STATUS NICInitTransmit(IN PRTMP_ADAPTER pAd)
        PTX_CONTEXT pPsPollContext = &(pAd->PsPollContext);
        PTX_CONTEXT pRTSContext = &(pAd->RTSContext);
        PTX_CONTEXT pMLMEContext = NULL;
-//      PHT_TX_CONTEXT  pHTTXContext = NULL;
+/*      PHT_TX_CONTEXT  pHTTXContext = NULL; */
        POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie;
        PVOID RingBaseVa;
-//      RTMP_TX_RING    *pTxRing;
+/*      RTMP_TX_RING    *pTxRing; */
        RTMP_MGMT_RING *pMgmtRing;
 
        DBGPRINT(RT_DEBUG_TRACE, ("--> NICInitTransmit\n"));
        pObj = pObj;
 
-       // Init 4 set of Tx parameters
+       /* Init 4 set of Tx parameters */
        for (acidx = 0; acidx < NUM_OF_TX_RING; acidx++) {
-               // Initialize all Transmit releated queues
+               /* Initialize all Transmit releated queues */
                InitializeQueueHeader(&pAd->TxSwQueue[acidx]);
 
-               // Next Local tx ring pointer waiting for buck out
+               /* Next Local tx ring pointer waiting for buck out */
                pAd->NextBulkOutIndex[acidx] = acidx;
-               pAd->BulkOutPending[acidx] = FALSE;     // Buck Out control flag
-               //pAd->DataBulkDoneIdx[acidx] = 0;
+               pAd->BulkOutPending[acidx] = FALSE;     /* Buck Out control flag */
+               /*pAd->DataBulkDoneIdx[acidx] = 0; */
        }
 
-       //pAd->NextMLMEIndex    = 0;
-       //pAd->PushMgmtIndex    = 0;
-       //pAd->PopMgmtIndex     = 0;
-       //InterlockedExchange(&pAd->MgmtQueueSize, 0);
-       //InterlockedExchange(&pAd->TxCount, 0);
+       /*pAd->NextMLMEIndex    = 0; */
+       /*pAd->PushMgmtIndex    = 0; */
+       /*pAd->PopMgmtIndex     = 0; */
+       /*InterlockedExchange(&pAd->MgmtQueueSize, 0); */
+       /*InterlockedExchange(&pAd->TxCount, 0); */
 
-       //pAd->PrioRingFirstIndex       = 0;
-       //pAd->PrioRingTxCnt            = 0;
+       /*pAd->PrioRingFirstIndex       = 0; */
+       /*pAd->PrioRingTxCnt            = 0; */
 
        do {
-               //
-               // TX_RING_SIZE, 4 ACs
-               //
+               /* */
+               /* TX_RING_SIZE, 4 ACs */
+               /* */
                for (acidx = 0; acidx < 4; acidx++) {
                        PHT_TX_CONTEXT pHTTXContext = &(pAd->TxContext[acidx]);
 
                        NdisZeroMemory(pHTTXContext, sizeof(HT_TX_CONTEXT));
-                       //Allocate URB
+                       /*Allocate URB */
                        LM_USB_ALLOC(pObj, pHTTXContext, PHTTX_BUFFER,
                                     sizeof(HTTX_BUFFER), Status,
                                     ("<-- ERROR in Alloc TX TxContext[%d] urb!! \n",
@@ -226,11 +226,11 @@ NDIS_STATUS NICInitTransmit(IN PRTMP_ADAPTER pAd)
                        pAd->BulkOutPending[acidx] = FALSE;
                }
 
-               //
-               // MGMT_RING_SIZE
-               //
+               /* */
+               /* MGMT_RING_SIZE */
+               /* */
 
-               // Allocate MGMT ring descriptor's memory
+               /* Allocate MGMT ring descriptor's memory */
                pAd->MgmtDescRing.AllocSize =
                    MGMT_RING_SIZE * sizeof(TX_CONTEXT);
                os_alloc_mem(pAd, (PUCHAR *) (&pAd->MgmtDescRing.AllocVa),
@@ -244,16 +244,16 @@ NDIS_STATUS NICInitTransmit(IN PRTMP_ADAPTER pAd)
                               pAd->MgmtDescRing.AllocSize);
                RingBaseVa = pAd->MgmtDescRing.AllocVa;
 
-               // Initialize MGMT Ring and associated buffer memory
+               /* Initialize MGMT Ring and associated buffer memory */
                pMgmtRing = &pAd->MgmtRing;
                for (i = 0; i < MGMT_RING_SIZE; i++) {
-                       // link the pre-allocated Mgmt buffer to MgmtRing.Cell
+                       /* link the pre-allocated Mgmt buffer to MgmtRing.Cell */
                        pMgmtRing->Cell[i].AllocSize = sizeof(TX_CONTEXT);
                        pMgmtRing->Cell[i].AllocVa = RingBaseVa;
                        pMgmtRing->Cell[i].pNdisPacket = NULL;
                        pMgmtRing->Cell[i].pNextNdisPacket = NULL;
 
-                       //Allocate URB for MLMEContext
+                       /*Allocate URB for MLMEContext */
                        pMLMEContext =
                            (PTX_CONTEXT) pAd->MgmtRing.Cell[i].AllocVa;
                        pMLMEContext->pUrb = RTUSB_ALLOC_URB(0);
@@ -273,27 +273,27 @@ NDIS_STATUS NICInitTransmit(IN PRTMP_ADAPTER pAd)
                        pMLMEContext->BulkOutSize = 0;
                        pMLMEContext->SelfIdx = i;
 
-                       // Offset to next ring descriptor address
+                       /* Offset to next ring descriptor address */
                        RingBaseVa = (PUCHAR) RingBaseVa + sizeof(TX_CONTEXT);
                }
                DBGPRINT(RT_DEBUG_TRACE,
                         ("MGMT Ring: total %d entry allocated\n", i));
 
-               //pAd->MgmtRing.TxSwFreeIdx = (MGMT_RING_SIZE - 1);
+               /*pAd->MgmtRing.TxSwFreeIdx = (MGMT_RING_SIZE - 1); */
                pAd->MgmtRing.TxSwFreeIdx = MGMT_RING_SIZE;
                pAd->MgmtRing.TxCpuIdx = 0;
                pAd->MgmtRing.TxDmaIdx = 0;
 
-               //
-               // BEACON_RING_SIZE
-               //
-               for (i = 0; i < BEACON_RING_SIZE; i++)  // 2
+               /* */
+               /* BEACON_RING_SIZE */
+               /* */
+               for (i = 0; i < BEACON_RING_SIZE; i++)  /* 2 */
                {
                        PTX_CONTEXT pBeaconContext = &(pAd->BeaconContext[i]);
 
                        NdisZeroMemory(pBeaconContext, sizeof(TX_CONTEXT));
 
-                       //Allocate URB
+                       /*Allocate URB */
                        LM_USB_ALLOC(pObj, pBeaconContext, PTX_BUFFER,
                                     sizeof(TX_BUFFER), Status,
                                     ("<-- ERROR in Alloc TX BeaconContext[%d] urb!! \n",
@@ -307,12 +307,12 @@ NDIS_STATUS NICInitTransmit(IN PRTMP_ADAPTER pAd)
                        pBeaconContext->IRPPending = FALSE;
                }
 
-               //
-               // NullContext
-               //
+               /* */
+               /* NullContext */
+               /* */
                NdisZeroMemory(pNullContext, sizeof(TX_CONTEXT));
 
-               //Allocate URB
+               /*Allocate URB */
                LM_USB_ALLOC(pObj, pNullContext, PTX_BUFFER, sizeof(TX_BUFFER),
                             Status,
                             ("<-- ERROR in Alloc TX NullContext urb!! \n"),
@@ -325,12 +325,12 @@ NDIS_STATUS NICInitTransmit(IN PRTMP_ADAPTER pAd)
                pNullContext->InUse = FALSE;
                pNullContext->IRPPending = FALSE;
 
-               //
-               // RTSContext
-               //
+               /* */
+               /* RTSContext */
+               /* */
                NdisZeroMemory(pRTSContext, sizeof(TX_CONTEXT));
 
-               //Allocate URB
+               /*Allocate URB */
                LM_USB_ALLOC(pObj, pRTSContext, PTX_BUFFER, sizeof(TX_BUFFER),
                             Status,
                             ("<-- ERROR in Alloc TX RTSContext urb!! \n"),
@@ -343,11 +343,11 @@ NDIS_STATUS NICInitTransmit(IN PRTMP_ADAPTER pAd)
                pRTSContext->InUse = FALSE;
                pRTSContext->IRPPending = FALSE;
 
-               //
-               // PsPollContext
-               //
-               //NdisZeroMemory(pPsPollContext, sizeof(TX_CONTEXT));
-               //Allocate URB
+               /* */
+               /* PsPollContext */
+               /* */
+               /*NdisZeroMemory(pPsPollContext, sizeof(TX_CONTEXT)); */
+               /*Allocate URB */
                LM_USB_ALLOC(pObj, pPsPollContext, PTX_BUFFER,
                             sizeof(TX_BUFFER), Status,
                             ("<-- ERROR in Alloc TX PsPollContext urb!! \n"),
@@ -407,7 +407,7 @@ out1:
                        LM_URB_FREE(pObj, pTxContext, sizeof(HTTX_BUFFER));
        }
 
-       // Here we didn't have any pre-allocated memory need to free.
+       /* Here we didn't have any pre-allocated memory need to free. */
 
        return Status;
 }
@@ -430,21 +430,21 @@ Note:
 */
 NDIS_STATUS RTMPAllocTxRxRingMemory(IN PRTMP_ADAPTER pAd)
 {
-//      COUNTER_802_11  pCounter = &pAd->WlanCounters;
+/*      COUNTER_802_11  pCounter = &pAd->WlanCounters; */
        NDIS_STATUS Status;
        INT num;
 
        DBGPRINT(RT_DEBUG_TRACE, ("--> RTMPAllocTxRxRingMemory\n"));
 
        do {
-               // Init the CmdQ and CmdQLock
+               /* Init the CmdQ and CmdQLock */
                NdisAllocateSpinLock(&pAd->CmdQLock);
                NdisAcquireSpinLock(&pAd->CmdQLock);
                RTUSBInitializeCmdQ(&pAd->CmdQ);
                NdisReleaseSpinLock(&pAd->CmdQLock);
 
                NdisAllocateSpinLock(&pAd->MLMEBulkOutLock);
-               //NdisAllocateSpinLock(&pAd->MLMEWaitQueueLock);
+               /*NdisAllocateSpinLock(&pAd->MLMEWaitQueueLock); */
                NdisAllocateSpinLock(&pAd->BulkOutLock[0]);
                NdisAllocateSpinLock(&pAd->BulkOutLock[1]);
                NdisAllocateSpinLock(&pAd->BulkOutLock[2]);
@@ -457,31 +457,31 @@ NDIS_STATUS RTMPAllocTxRxRingMemory(IN PRTMP_ADAPTER pAd)
                        NdisAllocateSpinLock(&pAd->TxContextQueueLock[num]);
                }
 
-//              NdisAllocateSpinLock(&pAd->MemLock);    // Not used in RT28XX
+/*              NdisAllocateSpinLock(&pAd->MemLock);    // Not used in RT28XX */
 
-//              NdisAllocateSpinLock(&pAd->MacTabLock); // init it in UserCfgInit()
-//              NdisAllocateSpinLock(&pAd->BATabLock); // init it in BATableInit()
+/*              NdisAllocateSpinLock(&pAd->MacTabLock); // init it in UserCfgInit() */
+/*              NdisAllocateSpinLock(&pAd->BATabLock); // init it in BATableInit() */
 
-//              for(num=0; num<MAX_LEN_OF_BA_REC_TABLE; num++)
-//              {
-//                      NdisAllocateSpinLock(&pAd->BATable.BARecEntry[num].RxReRingLock);
-//              }
+/*              for(num=0; num<MAX_LEN_OF_BA_REC_TABLE; num++) */
+/*              { */
+/*                      NdisAllocateSpinLock(&pAd->BATable.BARecEntry[num].RxReRingLock); */
+/*              } */
 
-               //
-               // Init Mac Table
-               //
-//              MacTableInitialize(pAd);
+               /* */
+               /* Init Mac Table */
+               /* */
+/*              MacTableInitialize(pAd); */
 
-               //
-               // Init send data structures and related parameters
-               //
+               /* */
+               /* Init send data structures and related parameters */
+               /* */
                Status = NICInitTransmit(pAd);
                if (Status != NDIS_STATUS_SUCCESS)
                        break;
 
-               //
-               // Init receive data structures and related parameters
-               //
+               /* */
+               /* Init receive data structures and related parameters */
+               /* */
                Status = NICInitRecv(pAd);
                if (Status != NDIS_STATUS_SUCCESS)
                        break;
@@ -536,42 +536,42 @@ VOID RTMPFreeTxRxRingMemory(IN PRTMP_ADAPTER pAd)
        PTX_CONTEXT pNullContext = &pAd->NullContext;
        PTX_CONTEXT pPsPollContext = &pAd->PsPollContext;
        PTX_CONTEXT pRTSContext = &pAd->RTSContext;
-//      PHT_TX_CONTEXT          pHTTXContext;
-       //PRTMP_REORDERBUF      pReorderBuf;
+/*      PHT_TX_CONTEXT          pHTTXContext; */
+       /*PRTMP_REORDERBUF      pReorderBuf; */
        POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie;
-//      RTMP_TX_RING            *pTxRing;
+/*      RTMP_TX_RING            *pTxRing; */
 
        DBGPRINT(RT_DEBUG_ERROR, ("---> RTMPFreeTxRxRingMemory\n"));
        pObj = pObj;
 
-       // Free all resources for the RECEIVE buffer queue.
+       /* Free all resources for the RECEIVE buffer queue. */
        for (i = 0; i < (RX_RING_SIZE); i++) {
                PRX_CONTEXT pRxContext = &(pAd->RxContext[i]);
                if (pRxContext)
                        LM_URB_FREE(pObj, pRxContext, MAX_RXBULK_SIZE);
        }
 
-       // Free PsPoll frame resource
+       /* Free PsPoll frame resource */
        LM_URB_FREE(pObj, pPsPollContext, sizeof(TX_BUFFER));
 
-       // Free NULL frame resource
+       /* Free NULL frame resource */
        LM_URB_FREE(pObj, pNullContext, sizeof(TX_BUFFER));
 
-       // Free RTS frame resource
+       /* Free RTS frame resource */
        LM_URB_FREE(pObj, pRTSContext, sizeof(TX_BUFFER));
 
-       // Free beacon frame resource
+       /* Free beacon frame resource */
        for (i = 0; i < BEACON_RING_SIZE; i++) {
                PTX_CONTEXT pBeaconContext = &(pAd->BeaconContext[i]);
                if (pBeaconContext)
                        LM_URB_FREE(pObj, pBeaconContext, sizeof(TX_BUFFER));
        }
 
-       // Free mgmt frame resource
+       /* Free mgmt frame resource */
        for (i = 0; i < MGMT_RING_SIZE; i++) {
                PTX_CONTEXT pMLMEContext =
                    (PTX_CONTEXT) pAd->MgmtRing.Cell[i].AllocVa;
-               //LM_URB_FREE(pObj, pMLMEContext, sizeof(TX_BUFFER));
+               /*LM_URB_FREE(pObj, pMLMEContext, sizeof(TX_BUFFER)); */
                if (NULL != pAd->MgmtRing.Cell[i].pNdisPacket) {
                        RTMPFreeNdisPacket(pAd,
                                           pAd->MgmtRing.Cell[i].pNdisPacket);
@@ -590,7 +590,7 @@ VOID RTMPFreeTxRxRingMemory(IN PRTMP_ADAPTER pAd)
        if (pAd->MgmtDescRing.AllocVa)
                os_free_mem(pAd, pAd->MgmtDescRing.AllocVa);
 
-       // Free Tx frame resource
+       /* Free Tx frame resource */
        for (acidx = 0; acidx < 4; acidx++) {
                PHT_TX_CONTEXT pHTTXContext = &(pAd->TxContext[acidx]);
                if (pHTTXContext)
@@ -609,15 +609,15 @@ VOID RTMPFreeTxRxRingMemory(IN PRTMP_ADAPTER pAd)
        NdisFreeSpinLock(&pAd->MLMEBulkOutLock);
 
        NdisFreeSpinLock(&pAd->CmdQLock);
-       // Clear all pending bulk-out request flags.
+       /* Clear all pending bulk-out request flags. */
        RTUSB_CLEAR_BULK_FLAG(pAd, 0xffffffff);
 
-//      NdisFreeSpinLock(&pAd->MacTabLock);
+/*      NdisFreeSpinLock(&pAd->MacTabLock); */
 
-//      for(i=0; i<MAX_LEN_OF_BA_REC_TABLE; i++)
-//      {
-//              NdisFreeSpinLock(&pAd->BATable.BARecEntry[i].RxReRingLock);
-//      }
+/*      for(i=0; i<MAX_LEN_OF_BA_REC_TABLE; i++) */
+/*      { */
+/*              NdisFreeSpinLock(&pAd->BATable.BARecEntry[i].RxReRingLock); */
+/*      } */
 
        DBGPRINT(RT_DEBUG_ERROR, ("<--- RTMPFreeTxRxRingMemory\n"));
 }
@@ -643,7 +643,7 @@ NDIS_STATUS RTUSBWriteHWMACAddress(IN PRTMP_ADAPTER pAd)
        NDIS_STATUS Status = NDIS_STATUS_SUCCESS;
        LARGE_INTEGER NOW;
 
-       // initialize the random number generator
+       /* initialize the random number generator */
        RTMP_GetCurrentSystemTime(&NOW);
 
        if (pAd->bLocalAdminMAC != TRUE) {
@@ -654,7 +654,7 @@ NDIS_STATUS RTUSBWriteHWMACAddress(IN PRTMP_ADAPTER pAd)
                pAd->CurrentAddress[4] = pAd->PermanentAddress[4];
                pAd->CurrentAddress[5] = pAd->PermanentAddress[5];
        }
-       // Write New MAC address to MAC_CSR2 & MAC_CSR3 & let ASIC know our new MAC
+       /* Write New MAC address to MAC_CSR2 & MAC_CSR3 & let ASIC know our new MAC */
        StaMacReg0.field.Byte0 = pAd->CurrentAddress[0];
        StaMacReg0.field.Byte1 = pAd->CurrentAddress[1];
        StaMacReg0.field.Byte2 = pAd->CurrentAddress[2];
@@ -689,7 +689,7 @@ Note:
 */
 VOID RT28XXDMADisable(IN RTMP_ADAPTER * pAd)
 {
-       // no use
+       /* no use */
 }
 
 /*
@@ -776,7 +776,7 @@ VOID RT28xx_UpdateBeaconToAsic(IN RTMP_ADAPTER * pAd,
        UINT i, padding;
        BEACON_SYNC_STRUCT *pBeaconSync = pAd->CommonCfg.pBeaconSync;
        UINT32 longValue;
-//      USHORT                  shortValue;
+/*      USHORT                  shortValue; */
        BOOLEAN bBcnReq = FALSE;
        UCHAR bcn_idx = 0;
 
@@ -789,9 +789,9 @@ VOID RT28xx_UpdateBeaconToAsic(IN RTMP_ADAPTER * pAd,
                DBGPRINT(RT_DEBUG_ERROR, ("pBeaconSync is NULL!\n"));
                return;
        }
-       //if ((pAd->WdsTab.Mode == WDS_BRIDGE_MODE) ||
-       //      ((pAd->ApCfg.MBSSID[apidx].MSSIDDev == NULL) || !(pAd->ApCfg.MBSSID[apidx].MSSIDDev->flags & IFF_UP))
-       //      )
+       /*if ((pAd->WdsTab.Mode == WDS_BRIDGE_MODE) || */
+       /*      ((pAd->ApCfg.MBSSID[apidx].MSSIDDev == NULL) || !(pAd->ApCfg.MBSSID[apidx].MSSIDDev->flags & IFF_UP)) */
+       /*      ) */
        if (bBcnReq == FALSE) {
                /* when the ra interface is down, do not send its beacon frame */
                /* clear all zero */
@@ -804,7 +804,7 @@ VOID RT28xx_UpdateBeaconToAsic(IN RTMP_ADAPTER * pAd,
                NdisZeroMemory(pBeaconSync->BeaconTxWI[bcn_idx], TXWI_SIZE);
        } else {
                ptr = (PUCHAR) & pAd->BeaconTxWI;
-               if (NdisEqualMemory(pBeaconSync->BeaconTxWI[bcn_idx], &pAd->BeaconTxWI, TXWI_SIZE) == FALSE) {  // If BeaconTxWI changed, we need to rewrite the TxWI for the Beacon frames.
+               if (NdisEqualMemory(pBeaconSync->BeaconTxWI[bcn_idx], &pAd->BeaconTxWI, TXWI_SIZE) == FALSE) {  /* If BeaconTxWI changed, we need to rewrite the TxWI for the Beacon frames. */
                        pBeaconSync->BeaconBitMap &=
                            (~(BEACON_BITMAP_MASK & (1 << bcn_idx)));
                        NdisMoveMemory(pBeaconSync->BeaconTxWI[bcn_idx],
@@ -813,7 +813,7 @@ VOID RT28xx_UpdateBeaconToAsic(IN RTMP_ADAPTER * pAd,
 
                if ((pBeaconSync->BeaconBitMap & (1 << bcn_idx)) !=
                    (1 << bcn_idx)) {
-                       for (i = 0; i < TXWI_SIZE; i += 4)      // 16-byte TXWI field
+                       for (i = 0; i < TXWI_SIZE; i += 4)      /* 16-byte TXWI field */
                        {
                                longValue =
                                    *ptr + (*(ptr + 1) << 8) +
@@ -832,8 +832,8 @@ VOID RT28xx_UpdateBeaconToAsic(IN RTMP_ADAPTER * pAd,
                for (i = 0; i < FrameLen /*HW_BEACON_OFFSET */ ; i += 2) {
                        if (NdisEqualMemory(ptr, pBeaconFrame, 2) == FALSE) {
                                NdisMoveMemory(ptr, pBeaconFrame, 2);
-                               //shortValue = *ptr + (*(ptr+1)<<8);
-                               //RTMP_IO_WRITE8(pAd, pAd->BeaconOffset[bcn_idx] + TXWI_SIZE + i, shortValue);
+                               /*shortValue = *ptr + (*(ptr+1)<<8); */
+                               /*RTMP_IO_WRITE8(pAd, pAd->BeaconOffset[bcn_idx] + TXWI_SIZE + i, shortValue); */
                                RTUSBMultiWrite(pAd,
                                                pAd->BeaconOffset[bcn_idx] +
                                                TXWI_SIZE + i, ptr, 2);
@@ -844,7 +844,7 @@ VOID RT28xx_UpdateBeaconToAsic(IN RTMP_ADAPTER * pAd,
 
                pBeaconSync->BeaconBitMap |= (1 << bcn_idx);
 
-               // For AP interface, set the DtimBitOn so that we can send Bcast/Mcast frame out after this beacon frame.
+               /* For AP interface, set the DtimBitOn so that we can send Bcast/Mcast frame out after this beacon frame. */
        }
 
 }
@@ -887,7 +887,7 @@ VOID RTUSBBssBeaconStart(IN RTMP_ADAPTER * pAd)
 {
        int apidx;
        BEACON_SYNC_STRUCT *pBeaconSync;
-//      LARGE_INTEGER   tsfTime, deltaTime;
+/*      LARGE_INTEGER   tsfTime, deltaTime; */
 
        pBeaconSync = pAd->CommonCfg.pBeaconSync;
        if (pBeaconSync && pBeaconSync->EnableBeacon) {
@@ -936,7 +936,7 @@ VOID RTUSBBssBeaconInit(IN RTMP_ADAPTER * pAd)
 
        os_alloc_mem(pAd, (PUCHAR *) (&pAd->CommonCfg.pBeaconSync),
                     sizeof(BEACON_SYNC_STRUCT));
-       //NdisAllocMemory(pAd->CommonCfg.pBeaconSync, sizeof(BEACON_SYNC_STRUCT), MEM_ALLOC_FLAG);
+       /*NdisAllocMemory(pAd->CommonCfg.pBeaconSync, sizeof(BEACON_SYNC_STRUCT), MEM_ALLOC_FLAG); */
        if (pAd->CommonCfg.pBeaconSync) {
                pBeaconSync = pAd->CommonCfg.pBeaconSync;
                NdisZeroMemory(pBeaconSync, sizeof(BEACON_SYNC_STRUCT));
@@ -949,7 +949,7 @@ VOID RTUSBBssBeaconInit(IN RTMP_ADAPTER * pAd)
                }
                pBeaconSync->BeaconBitMap = 0;
 
-               //RTMPInitTimer(pAd, &pAd->CommonCfg.BeaconUpdateTimer, GET_TIMER_FUNCTION(BeaconUpdateExec), pAd, TRUE);
+               /*RTMPInitTimer(pAd, &pAd->CommonCfg.BeaconUpdateTimer, GET_TIMER_FUNCTION(BeaconUpdateExec), pAd, TRUE); */
                pBeaconSync->EnableBeacon = TRUE;
        }
 }
@@ -1002,9 +1002,9 @@ VOID BeaconUpdateExec(IN PVOID SystemSpecific1,
                      IN PVOID SystemSpecific2, IN PVOID SystemSpecific3)
 {
        PRTMP_ADAPTER pAd = (PRTMP_ADAPTER) FunctionContext;
-       LARGE_INTEGER tsfTime_a;        //, tsfTime_b, deltaTime_exp, deltaTime_ab;
+       LARGE_INTEGER tsfTime_a;        /*, tsfTime_b, deltaTime_exp, deltaTime_ab; */
        UINT32 delta, delta2MS, period2US, remain, remain_low, remain_high;
-//      BOOLEAN                 positive;
+/*      BOOLEAN                 positive; */
 
        if (pAd->CommonCfg.IsUpdateBeacon == TRUE) {
                ReSyncBeaconTime(pAd);
@@ -1014,7 +1014,7 @@ VOID BeaconUpdateExec(IN PVOID SystemSpecific1,
        RTMP_IO_READ32(pAd, TSF_TIMER_DW0, &tsfTime_a.u.LowPart);
        RTMP_IO_READ32(pAd, TSF_TIMER_DW1, &tsfTime_a.u.HighPart);
 
-       //positive=getDeltaTime(tsfTime_a, expectedTime, &deltaTime_exp);
+       /*positive=getDeltaTime(tsfTime_a, expectedTime, &deltaTime_exp); */
        period2US = (pAd->CommonCfg.BeaconPeriod << 10);
        remain_high = pAd->CommonCfg.BeaconRemain * tsfTime_a.u.HighPart;
        remain_low = tsfTime_a.u.LowPart % (pAd->CommonCfg.BeaconPeriod << 10);
@@ -1051,20 +1051,20 @@ VOID RT28xxUsbMlmeRadioOn(IN PRTMP_ADAPTER pAd)
                AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x02);
                RTMPusecDelay(10000);
        }
-       //NICResetFromError(pAd);
+       /*NICResetFromError(pAd); */
 
-       // Enable Tx/Rx
+       /* Enable Tx/Rx */
        RTMPEnableRxTx(pAd);
 
        if (pChipOps->AsicReverseRfFromSleepMode)
                pChipOps->AsicReverseRfFromSleepMode(pAd);
 
-       // Clear Radio off flag
+       /* Clear Radio off flag */
        RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
 
        RTUSBBulkReceive(pAd);
 
-       // Set LED
+       /* Set LED */
        RTMPSetLED(pAd, LED_RADIO_ON);
 }
 
@@ -1078,11 +1078,11 @@ VOID RT28xxUsbMlmeRadioOFF(IN PRTMP_ADAPTER pAd)
        if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF))
                return;
 
-       // Clear PMKID cache.
+       /* Clear PMKID cache. */
        pAd->StaCfg.SavedPMKNum = 0;
        RTMPZeroMemory(pAd->StaCfg.SavedPMK, (PMKID_NO * sizeof(BSSID_INFO)));
 
-       // Link down first if any association exists
+       /* Link down first if any association exists */
        if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) {
                if (INFRA_ON(pAd) || ADHOC_ON(pAd)) {
                        MLME_DISASSOC_REQ_STRUCT DisReq;
@@ -1110,38 +1110,38 @@ VOID RT28xxUsbMlmeRadioOFF(IN PRTMP_ADAPTER pAd)
                        }
                }
        }
-       // Set Radio off flag
+       /* Set Radio off flag */
        RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
 
        {
-               // Link down first if any association exists
+               /* Link down first if any association exists */
                if (INFRA_ON(pAd) || ADHOC_ON(pAd))
                        LinkDown(pAd, FALSE);
                RTMPusecDelay(10000);
 
-               //==========================================
-               // Clean up old bss table
+               /*========================================== */
+               /* Clean up old bss table */
                BssTableInit(&pAd->ScanTab);
        }
 
-       // Set LED
+       /* Set LED */
        RTMPSetLED(pAd, LED_RADIO_OFF);
 
        if (pAd->CommonCfg.BBPCurrentBW == BW_40) {
-               // Must using 40MHz.
+               /* Must using 40MHz. */
                AsicTurnOffRFClk(pAd, pAd->CommonCfg.CentralChannel);
        } else {
-               // Must using 20MHz.
+               /* Must using 20MHz. */
                AsicTurnOffRFClk(pAd, pAd->CommonCfg.Channel);
        }
 
-       // Disable Tx/Rx DMA
-       RTUSBReadMACRegister(pAd, WPDMA_GLO_CFG, &GloCfg.word); // disable DMA
+       /* Disable Tx/Rx DMA */
+       RTUSBReadMACRegister(pAd, WPDMA_GLO_CFG, &GloCfg.word); /* disable DMA */
        GloCfg.field.EnableTxDMA = 0;
        GloCfg.field.EnableRxDMA = 0;
-       RTUSBWriteMACRegister(pAd, WPDMA_GLO_CFG, GloCfg.word); // abort all TX rings
+       RTUSBWriteMACRegister(pAd, WPDMA_GLO_CFG, GloCfg.word); /* abort all TX rings */
 
-       // Waiting for DMA idle
+       /* Waiting for DMA idle */
        i = 0;
        do {
                RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &GloCfg.word);
@@ -1152,7 +1152,7 @@ VOID RT28xxUsbMlmeRadioOFF(IN PRTMP_ADAPTER pAd)
                RTMPusecDelay(1000);
        } while (i++ < 100);
 
-       // Disable MAC Tx/Rx
+       /* Disable MAC Tx/Rx */
        RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
        Value &= (0xfffffff3);
        RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
@@ -1162,4 +1162,4 @@ VOID RT28xxUsbMlmeRadioOFF(IN PRTMP_ADAPTER pAd)
        }
 }
 
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
index 92c44c7..bd12025 100644 (file)
@@ -144,7 +144,7 @@ BOOLEAN PeerAddBAReqActionSanity(IN PRTMP_ADAPTER pAd,
                          MsgLen));
                return FALSE;
        }
-       // we support immediate BA.
+       /* we support immediate BA. */
        *(USHORT *) (&pAddFrame->BaParm) =
            cpu2le16(*(USHORT *) (&pAddFrame->BaParm));
        pAddFrame->TimeOutValue = cpu2le16(pAddFrame->TimeOutValue);
@@ -160,7 +160,7 @@ BOOLEAN PeerAddBAReqActionSanity(IN PRTMP_ADAPTER pAd,
                          pAddFrame->BaParm.AMSDUSupported));
                return FALSE;
        }
-       // we support immediate BA.
+       /* we support immediate BA. */
        if (pAddFrame->BaParm.TID & 0xfff0) {
                DBGPRINT(RT_DEBUG_ERROR,
                         ("PeerAddBAReqActionSanity: ADDBA Request incorrect TID = %d\n",
@@ -183,7 +183,7 @@ BOOLEAN PeerAddBARspActionSanity(IN PRTMP_ADAPTER pAd,
                          MsgLen));
                return FALSE;
        }
-       // we support immediate BA.
+       /* we support immediate BA. */
        *(USHORT *) (&pAddFrame->BaParm) =
            cpu2le16(*(USHORT *) (&pAddFrame->BaParm));
        pAddFrame->StatusCode = cpu2le16(pAddFrame->StatusCode);
@@ -195,7 +195,7 @@ BOOLEAN PeerAddBARspActionSanity(IN PRTMP_ADAPTER pAd,
                          pAddFrame->BaParm.BAPolicy));
                return FALSE;
        }
-       // we support immediate BA.
+       /* we support immediate BA. */
        if (pAddFrame->BaParm.TID & 0xfff0) {
                DBGPRINT(RT_DEBUG_ERROR,
                         ("PeerAddBARspActionSanity: ADDBA Response incorrect TID = %d\n",
@@ -209,7 +209,7 @@ BOOLEAN PeerAddBARspActionSanity(IN PRTMP_ADAPTER pAd,
 BOOLEAN PeerDelBAActionSanity(IN PRTMP_ADAPTER pAd,
                              IN UCHAR Wcid, IN VOID * pMsg, IN ULONG MsgLen)
 {
-       //PFRAME_802_11 pFrame = (PFRAME_802_11)pMsg;
+       /*PFRAME_802_11 pFrame = (PFRAME_802_11)pMsg; */
        PFRAME_DELBA_REQ pDelFrame;
        if (MsgLen != (sizeof(FRAME_DELBA_REQ)))
                return FALSE;
@@ -240,7 +240,7 @@ BOOLEAN PeerDelBAActionSanity(IN PRTMP_ADAPTER pAd,
 
     ==========================================================================
  */
-BOOLEAN PeerBeaconAndProbeRspSanity(IN PRTMP_ADAPTER pAd, IN VOID * Msg, IN ULONG MsgLen, IN UCHAR MsgChannel, OUT PUCHAR pAddr2, OUT PUCHAR pBssid, OUT CHAR Ssid[], OUT UCHAR * pSsidLen, OUT UCHAR * pBssType, OUT USHORT * pBeaconPeriod, OUT UCHAR * pChannel, OUT UCHAR * pNewChannel, OUT LARGE_INTEGER * pTimestamp, OUT CF_PARM * pCfParm, OUT USHORT * pAtimWin, OUT USHORT * pCapabilityInfo, OUT UCHAR * pErp, OUT UCHAR * pDtimCount, OUT UCHAR * pDtimPeriod, OUT UCHAR * pBcastFlag, OUT UCHAR * pMessageToMe, OUT UCHAR SupRate[], OUT UCHAR * pSupRateLen, OUT UCHAR ExtRate[], OUT UCHAR * pExtRateLen, OUT UCHAR * pCkipFlag, OUT UCHAR * pAironetCellPowerLimit, OUT PEDCA_PARM pEdcaParm, OUT PQBSS_LOAD_PARM pQbssLoad, OUT PQOS_CAPABILITY_PARM pQosCapability, OUT ULONG * pRalinkIe, OUT UCHAR * pHtCapabilityLen, OUT UCHAR * pPreNHtCapabilityLen, OUT HT_CAPABILITY_IE * pHtCapability, OUT UCHAR * AddHtInfoLen, OUT ADD_HT_INFO_IE * AddHtInfo, OUT UCHAR * NewExtChannelOffset, // Ht extension channel offset(above or below)
+BOOLEAN PeerBeaconAndProbeRspSanity(IN PRTMP_ADAPTER pAd, IN VOID * Msg, IN ULONG MsgLen, IN UCHAR MsgChannel, OUT PUCHAR pAddr2, OUT PUCHAR pBssid, OUT CHAR Ssid[], OUT UCHAR * pSsidLen, OUT UCHAR * pBssType, OUT USHORT * pBeaconPeriod, OUT UCHAR * pChannel, OUT UCHAR * pNewChannel, OUT LARGE_INTEGER * pTimestamp, OUT CF_PARM * pCfParm, OUT USHORT * pAtimWin, OUT USHORT * pCapabilityInfo, OUT UCHAR * pErp, OUT UCHAR * pDtimCount, OUT UCHAR * pDtimPeriod, OUT UCHAR * pBcastFlag, OUT UCHAR * pMessageToMe, OUT UCHAR SupRate[], OUT UCHAR * pSupRateLen, OUT UCHAR ExtRate[], OUT UCHAR * pExtRateLen, OUT UCHAR * pCkipFlag, OUT UCHAR * pAironetCellPowerLimit, OUT PEDCA_PARM pEdcaParm, OUT PQBSS_LOAD_PARM pQbssLoad, OUT PQOS_CAPABILITY_PARM pQosCapability, OUT ULONG * pRalinkIe, OUT UCHAR * pHtCapabilityLen, OUT UCHAR * pPreNHtCapabilityLen, OUT HT_CAPABILITY_IE * pHtCapability, OUT UCHAR * AddHtInfoLen, OUT ADD_HT_INFO_IE * AddHtInfo, OUT UCHAR * NewExtChannelOffset, /* Ht extension channel offset(above or below) */
                                    OUT USHORT * LengthVIE,
                                    OUT PNDIS_802_11_VARIABLE_IEs pVIE)
 {
@@ -250,16 +250,16 @@ BOOLEAN PeerBeaconAndProbeRspSanity(IN PRTMP_ADAPTER pAd, IN VOID * Msg, IN ULON
        PEID_STRUCT pEid;
        UCHAR SubType;
        UCHAR Sanity;
-       //UCHAR                             ECWMin, ECWMax;
-       //MAC_CSR9_STRUC            Csr9;
+       /*UCHAR                             ECWMin, ECWMax; */
+       /*MAC_CSR9_STRUC            Csr9; */
        ULONG Length = 0;
 
-       // For some 11a AP which didn't have DS_IE, we use two conditions to decide the channel
-       //      1. If the AP is 11n enabled, then check the control channel.
-       //      2. If the AP didn't have any info about channel, use the channel we received this frame as the channel. (May inaccuracy!!)
+       /* For some 11a AP which didn't have DS_IE, we use two conditions to decide the channel */
+       /*      1. If the AP is 11n enabled, then check the control channel. */
+       /*      2. If the AP didn't have any info about channel, use the channel we received this frame as the channel. (May inaccuracy!!) */
        UCHAR CtrlChannel = 0;
 
-       // Add for 3 necessary EID field check
+       /* Add for 3 necessary EID field check */
        Sanity = 0;
 
        *pAtimWin = 0;
@@ -269,34 +269,34 @@ BOOLEAN PeerBeaconAndProbeRspSanity(IN PRTMP_ADAPTER pAd, IN VOID * Msg, IN ULON
        *pBcastFlag = 0;
        *pMessageToMe = 0;
        *pExtRateLen = 0;
-       *pCkipFlag = 0;         // Default of CkipFlag is 0
-       *pAironetCellPowerLimit = 0xFF; // Default of AironetCellPowerLimit is 0xFF
-       *LengthVIE = 0;         // Set the length of VIE to init value 0
-       *pHtCapabilityLen = 0;  // Set the length of VIE to init value 0
+       *pCkipFlag = 0;         /* Default of CkipFlag is 0 */
+       *pAironetCellPowerLimit = 0xFF; /* Default of AironetCellPowerLimit is 0xFF */
+       *LengthVIE = 0;         /* Set the length of VIE to init value 0 */
+       *pHtCapabilityLen = 0;  /* Set the length of VIE to init value 0 */
        if (pAd->OpMode == OPMODE_STA)
-               *pPreNHtCapabilityLen = 0;      // Set the length of VIE to init value 0
-       *AddHtInfoLen = 0;      // Set the length of VIE to init value 0
+               *pPreNHtCapabilityLen = 0;      /* Set the length of VIE to init value 0 */
+       *AddHtInfoLen = 0;      /* Set the length of VIE to init value 0 */
        *pRalinkIe = 0;
        *pNewChannel = 0;
-       *NewExtChannelOffset = 0xff;    //Default 0xff means no such IE
-       pCfParm->bValid = FALSE;        // default: no IE_CF found
-       pQbssLoad->bValid = FALSE;      // default: no IE_QBSS_LOAD found
-       pEdcaParm->bValid = FALSE;      // default: no IE_EDCA_PARAMETER found
-       pQosCapability->bValid = FALSE; // default: no IE_QOS_CAPABILITY found
+       *NewExtChannelOffset = 0xff;    /*Default 0xff means no such IE */
+       pCfParm->bValid = FALSE;        /* default: no IE_CF found */
+       pQbssLoad->bValid = FALSE;      /* default: no IE_QBSS_LOAD found */
+       pEdcaParm->bValid = FALSE;      /* default: no IE_EDCA_PARAMETER found */
+       pQosCapability->bValid = FALSE; /* default: no IE_QOS_CAPABILITY found */
 
        pFrame = (PFRAME_802_11) Msg;
 
-       // get subtype from header
+       /* get subtype from header */
        SubType = (UCHAR) pFrame->Hdr.FC.SubType;
 
-       // get Addr2 and BSSID from header
+       /* get Addr2 and BSSID from header */
        COPY_MAC_ADDR(pAddr2, pFrame->Hdr.Addr2);
        COPY_MAC_ADDR(pBssid, pFrame->Hdr.Addr3);
 
        Ptr = pFrame->Octet;
        Length += LENGTH_802_11;
 
-       // get timestamp from payload and advance the pointer
+       /* get timestamp from payload and advance the pointer */
        NdisMoveMemory(pTimestamp, Ptr, TIMESTAMP_LEN);
 
        pTimestamp->u.LowPart = cpu2le32(pTimestamp->u.LowPart);
@@ -305,12 +305,12 @@ BOOLEAN PeerBeaconAndProbeRspSanity(IN PRTMP_ADAPTER pAd, IN VOID * Msg, IN ULON
        Ptr += TIMESTAMP_LEN;
        Length += TIMESTAMP_LEN;
 
-       // get beacon interval from payload and advance the pointer
+       /* get beacon interval from payload and advance the pointer */
        NdisMoveMemory(pBeaconPeriod, Ptr, 2);
        Ptr += 2;
        Length += 2;
 
-       // get capability info from payload and advance the pointer
+       /* get capability info from payload and advance the pointer */
        NdisMoveMemory(pCapabilityInfo, Ptr, 2);
        Ptr += 2;
        Length += 2;
@@ -322,11 +322,11 @@ BOOLEAN PeerBeaconAndProbeRspSanity(IN PRTMP_ADAPTER pAd, IN VOID * Msg, IN ULON
 
        pEid = (PEID_STRUCT) Ptr;
 
-       // get variable fields from payload and advance the pointer
+       /* get variable fields from payload and advance the pointer */
        while ((Length + 2 + pEid->Len) <= MsgLen) {
-               //
-               // Secure copy VIE to VarIE[MAX_VIE_LEN] didn't overflow.
-               //
+               /* */
+               /* Secure copy VIE to VarIE[MAX_VIE_LEN] didn't overflow. */
+               /* */
                if ((*LengthVIE + pEid->Len + 2) >= MAX_VIE_LEN) {
                        DBGPRINT(RT_DEBUG_WARN,
                                 ("PeerBeaconAndProbeRspSanity - Variable IEs out of resource [len(=%d) > MAX_VIE_LEN(=%d)]\n",
@@ -336,7 +336,7 @@ BOOLEAN PeerBeaconAndProbeRspSanity(IN PRTMP_ADAPTER pAd, IN VOID * Msg, IN ULON
 
                switch (pEid->Eid) {
                case IE_SSID:
-                       // Already has one SSID EID in this beacon, ignore the second one
+                       /* Already has one SSID EID in this beacon, ignore the second one */
                        if (Sanity & 0x1)
                                break;
                        if (pEid->Len <= MAX_LEN_OF_SSID) {
@@ -357,11 +357,11 @@ BOOLEAN PeerBeaconAndProbeRspSanity(IN PRTMP_ADAPTER pAd, IN VOID * Msg, IN ULON
                                NdisMoveMemory(SupRate, pEid->Octet, pEid->Len);
                                *pSupRateLen = pEid->Len;
 
-                               // TODO: 2004-09-14 not a good design here, cause it exclude extra rates
-                               // from ScanTab. We should report as is. And filter out unsupported
-                               // rates in MlmeAux.
-                               // Check against the supported rates
-                               // RTMPCheckRates(pAd, SupRate, pSupRateLen);
+                               /* TODO: 2004-09-14 not a good design here, cause it exclude extra rates */
+                               /* from ScanTab. We should report as is. And filter out unsupported */
+                               /* rates in MlmeAux. */
+                               /* Check against the supported rates */
+                               /* RTMPCheckRates(pAd, SupRate, pSupRateLen); */
                        } else {
                                DBGPRINT(RT_DEBUG_TRACE,
                                         ("PeerBeaconAndProbeRspSanity - wrong IE_SUPP_RATES (len=%d)\n",
@@ -371,11 +371,11 @@ BOOLEAN PeerBeaconAndProbeRspSanity(IN PRTMP_ADAPTER pAd, IN VOID * Msg, IN ULON
                        break;
 
                case IE_HT_CAP:
-                       if (pEid->Len >= SIZE_HT_CAP_IE)        //Note: allow extension.!!
+                       if (pEid->Len >= SIZE_HT_CAP_IE)        /*Note: allow extension.!! */
                        {
                                NdisMoveMemory(pHtCapability, pEid->Octet,
                                               sizeof(HT_CAPABILITY_IE));
-                               *pHtCapabilityLen = SIZE_HT_CAP_IE;     // Nnow we only support 26 bytes.
+                               *pHtCapabilityLen = SIZE_HT_CAP_IE;     /* Nnow we only support 26 bytes. */
 
                                *(USHORT *) (&pHtCapability->HtCapInfo) =
                                    cpu2le16(*(USHORT *)
@@ -385,7 +385,7 @@ BOOLEAN PeerBeaconAndProbeRspSanity(IN PRTMP_ADAPTER pAd, IN VOID * Msg, IN ULON
                                             (&pHtCapability->ExtHtCapInfo));
 
                                {
-                                       *pPreNHtCapabilityLen = 0;      // Nnow we only support 26 bytes.
+                                       *pPreNHtCapabilityLen = 0;      /* Nnow we only support 26 bytes. */
 
                                        Ptr = (PUCHAR) pVIE;
                                        NdisMoveMemory(Ptr + *LengthVIE,
@@ -402,8 +402,8 @@ BOOLEAN PeerBeaconAndProbeRspSanity(IN PRTMP_ADAPTER pAd, IN VOID * Msg, IN ULON
                        break;
                case IE_ADD_HT:
                        if (pEid->Len >= sizeof(ADD_HT_INFO_IE)) {
-                               // This IE allows extension, but we can ignore extra bytes beyond our knowledge , so only
-                               // copy first sizeof(ADD_HT_INFO_IE)
+                               /* This IE allows extension, but we can ignore extra bytes beyond our knowledge , so only */
+                               /* copy first sizeof(ADD_HT_INFO_IE) */
                                NdisMoveMemory(AddHtInfo, pEid->Octet,
                                               sizeof(ADD_HT_INFO_IE));
                                *AddHtInfoLen = SIZE_ADD_HT_INFO_IE;
@@ -500,17 +500,17 @@ BOOLEAN PeerBeaconAndProbeRspSanity(IN PRTMP_ADAPTER pAd, IN VOID * Msg, IN ULON
                        break;
                case IE_CHANNEL_SWITCH_ANNOUNCEMENT:
                        if (pEid->Len == 3) {
-                               *pNewChannel = pEid->Octet[1];  //extract new channel number
+                               *pNewChannel = pEid->Octet[1];  /*extract new channel number */
                        }
                        break;
 
-                       // New for WPA
-                       // CCX v2 has the same IE, we need to parse that too
-                       // Wifi WMM use the same IE vale, need to parse that too
-                       // case IE_WPA:
+                       /* New for WPA */
+                       /* CCX v2 has the same IE, we need to parse that too */
+                       /* Wifi WMM use the same IE vale, need to parse that too */
+                       /* case IE_WPA: */
                case IE_VENDOR_SPECIFIC:
-                       // Check Broadcom/Atheros 802.11n OUI version, for HT Capability IE.
-                       // This HT IE is before IEEE draft set HT IE value.2006-09-28 by Jan.
+                       /* Check Broadcom/Atheros 802.11n OUI version, for HT Capability IE. */
+                       /* This HT IE is before IEEE draft set HT IE value.2006-09-28 by Jan. */
                        /*if (NdisEqualMemory(pEid->Octet, BROADCOM_OUI, 3) && (pEid->Len >= 4))
                           {
                           if ((pEid->Octet[3] == OUI_BROADCOM_HT) && (pEid->Len >= 30))
@@ -529,19 +529,19 @@ BOOLEAN PeerBeaconAndProbeRspSanity(IN PRTMP_ADAPTER pAd, IN VOID * Msg, IN ULON
                           }
                           }
                         */
-                       // Check the OUI version, filter out non-standard usage
+                       /* Check the OUI version, filter out non-standard usage */
                        if (NdisEqualMemory(pEid->Octet, RALINK_OUI, 3)
                            && (pEid->Len == 7)) {
-                               //*pRalinkIe = pEid->Octet[3];
+                               /**pRalinkIe = pEid->Octet[3]; */
                                if (pEid->Octet[3] != 0)
                                        *pRalinkIe = pEid->Octet[3];
                                else
-                                       *pRalinkIe = 0xf0000000;        // Set to non-zero value (can't set bit0-2) to represent this is Ralink Chip. So at linkup, we will set ralinkchip flag.
+                                       *pRalinkIe = 0xf0000000;        /* Set to non-zero value (can't set bit0-2) to represent this is Ralink Chip. So at linkup, we will set ralinkchip flag. */
                        }
-                       // This HT IE is before IEEE draft set HT IE value.2006-09-28 by Jan.
+                       /* This HT IE is before IEEE draft set HT IE value.2006-09-28 by Jan. */
 
-                       // Other vendors had production before IE_HT_CAP value is assigned. To backward support those old-firmware AP,
-                       // Check broadcom-defiend pre-802.11nD1.0 OUI for HT related IE, including HT Capatilities IE and HT Information IE
+                       /* Other vendors had production before IE_HT_CAP value is assigned. To backward support those old-firmware AP, */
+                       /* Check broadcom-defiend pre-802.11nD1.0 OUI for HT related IE, including HT Capatilities IE and HT Information IE */
                        else if ((*pHtCapabilityLen == 0)
                                 && NdisEqualMemory(pEid->Octet, PRE_N_HT_OUI,
                                                    3) && (pEid->Len >= 4)
@@ -564,7 +564,7 @@ BOOLEAN PeerBeaconAndProbeRspSanity(IN PRTMP_ADAPTER pAd, IN VOID * Msg, IN ULON
                                        *AddHtInfoLen = SIZE_ADD_HT_INFO_IE;
                                }
                        } else if (NdisEqualMemory(pEid->Octet, WPA_OUI, 4)) {
-                               // Copy to pVIE which will report to microsoft bssid list.
+                               /* Copy to pVIE which will report to microsoft bssid list. */
                                Ptr = (PUCHAR) pVIE;
                                NdisMoveMemory(Ptr + *LengthVIE, &pEid->Eid,
                                               pEid->Len + 2);
@@ -575,39 +575,39 @@ BOOLEAN PeerBeaconAndProbeRspSanity(IN PRTMP_ADAPTER pAd, IN VOID * Msg, IN ULON
                                PUCHAR ptr;
                                int i;
 
-                               // parsing EDCA parameters
+                               /* parsing EDCA parameters */
                                pEdcaParm->bValid = TRUE;
-                               pEdcaParm->bQAck = FALSE;       // pEid->Octet[0] & 0x10;
-                               pEdcaParm->bQueueRequest = FALSE;       // pEid->Octet[0] & 0x20;
-                               pEdcaParm->bTxopRequest = FALSE;        // pEid->Octet[0] & 0x40;
+                               pEdcaParm->bQAck = FALSE;       /* pEid->Octet[0] & 0x10; */
+                               pEdcaParm->bQueueRequest = FALSE;       /* pEid->Octet[0] & 0x20; */
+                               pEdcaParm->bTxopRequest = FALSE;        /* pEid->Octet[0] & 0x40; */
                                pEdcaParm->EdcaUpdateCount =
                                    pEid->Octet[6] & 0x0f;
                                pEdcaParm->bAPSDCapable =
                                    (pEid->Octet[6] & 0x80) ? 1 : 0;
                                ptr = &pEid->Octet[8];
                                for (i = 0; i < 4; i++) {
-                                       UCHAR aci = (*ptr & 0x60) >> 5; // b5~6 is AC INDEX
-                                       pEdcaParm->bACM[aci] = (((*ptr) & 0x10) == 0x10);       // b5 is ACM
-                                       pEdcaParm->Aifsn[aci] = (*ptr) & 0x0f;  // b0~3 is AIFSN
-                                       pEdcaParm->Cwmin[aci] = *(ptr + 1) & 0x0f;      // b0~4 is Cwmin
-                                       pEdcaParm->Cwmax[aci] = *(ptr + 1) >> 4;        // b5~8 is Cwmax
-                                       pEdcaParm->Txop[aci] = *(ptr + 2) + 256 * (*(ptr + 3)); // in unit of 32-us
-                                       ptr += 4;       // point to next AC
+                                       UCHAR aci = (*ptr & 0x60) >> 5; /* b5~6 is AC INDEX */
+                                       pEdcaParm->bACM[aci] = (((*ptr) & 0x10) == 0x10);       /* b5 is ACM */
+                                       pEdcaParm->Aifsn[aci] = (*ptr) & 0x0f;  /* b0~3 is AIFSN */
+                                       pEdcaParm->Cwmin[aci] = *(ptr + 1) & 0x0f;      /* b0~4 is Cwmin */
+                                       pEdcaParm->Cwmax[aci] = *(ptr + 1) >> 4;        /* b5~8 is Cwmax */
+                                       pEdcaParm->Txop[aci] = *(ptr + 2) + 256 * (*(ptr + 3)); /* in unit of 32-us */
+                                       ptr += 4;       /* point to next AC */
                                }
                        } else
                            if (NdisEqualMemory(pEid->Octet, WME_INFO_ELEM, 6)
                                && (pEid->Len == 7)) {
-                               // parsing EDCA parameters
+                               /* parsing EDCA parameters */
                                pEdcaParm->bValid = TRUE;
-                               pEdcaParm->bQAck = FALSE;       // pEid->Octet[0] & 0x10;
-                               pEdcaParm->bQueueRequest = FALSE;       // pEid->Octet[0] & 0x20;
-                               pEdcaParm->bTxopRequest = FALSE;        // pEid->Octet[0] & 0x40;
+                               pEdcaParm->bQAck = FALSE;       /* pEid->Octet[0] & 0x10; */
+                               pEdcaParm->bQueueRequest = FALSE;       /* pEid->Octet[0] & 0x20; */
+                               pEdcaParm->bTxopRequest = FALSE;        /* pEid->Octet[0] & 0x40; */
                                pEdcaParm->EdcaUpdateCount =
                                    pEid->Octet[6] & 0x0f;
                                pEdcaParm->bAPSDCapable =
                                    (pEid->Octet[6] & 0x80) ? 1 : 0;
 
-                               // use default EDCA parameter
+                               /* use default EDCA parameter */
                                pEdcaParm->bACM[QID_AC_BE] = 0;
                                pEdcaParm->Aifsn[QID_AC_BE] = 3;
                                pEdcaParm->Cwmin[QID_AC_BE] = CW_MIN_IN_BITS;
@@ -625,7 +625,7 @@ BOOLEAN PeerBeaconAndProbeRspSanity(IN PRTMP_ADAPTER pAd, IN VOID * Msg, IN ULON
                                pEdcaParm->Cwmin[QID_AC_VI] =
                                    CW_MIN_IN_BITS - 1;
                                pEdcaParm->Cwmax[QID_AC_VI] = CW_MAX_IN_BITS;
-                               pEdcaParm->Txop[QID_AC_VI] = 96;        // AC_VI: 96*32us ~= 3ms
+                               pEdcaParm->Txop[QID_AC_VI] = 96;        /* AC_VI: 96*32us ~= 3ms */
 
                                pEdcaParm->bACM[QID_AC_VO] = 0;
                                pEdcaParm->Aifsn[QID_AC_VO] = 2;
@@ -633,7 +633,7 @@ BOOLEAN PeerBeaconAndProbeRspSanity(IN PRTMP_ADAPTER pAd, IN VOID * Msg, IN ULON
                                    CW_MIN_IN_BITS - 2;
                                pEdcaParm->Cwmax[QID_AC_VO] =
                                    CW_MAX_IN_BITS - 1;
-                               pEdcaParm->Txop[QID_AC_VO] = 48;        // AC_VO: 48*32us ~= 1.5ms
+                               pEdcaParm->Txop[QID_AC_VO] = 48;        /* AC_VO: 48*32us ~= 1.5ms */
                        }
 
                        break;
@@ -643,11 +643,11 @@ BOOLEAN PeerBeaconAndProbeRspSanity(IN PRTMP_ADAPTER pAd, IN VOID * Msg, IN ULON
                                NdisMoveMemory(ExtRate, pEid->Octet, pEid->Len);
                                *pExtRateLen = pEid->Len;
 
-                               // TODO: 2004-09-14 not a good design here, cause it exclude extra rates
-                               // from ScanTab. We should report as is. And filter out unsupported
-                               // rates in MlmeAux.
-                               // Check against the supported rates
-                               // RTMPCheckRates(pAd, ExtRate, pExtRateLen);
+                               /* TODO: 2004-09-14 not a good design here, cause it exclude extra rates */
+                               /* from ScanTab. We should report as is. And filter out unsupported */
+                               /* rates in MlmeAux. */
+                               /* Check against the supported rates */
+                               /* RTMPCheckRates(pAd, ExtRate, pExtRateLen); */
                        }
                        break;
 
@@ -658,32 +658,32 @@ BOOLEAN PeerBeaconAndProbeRspSanity(IN PRTMP_ADAPTER pAd, IN VOID * Msg, IN ULON
                        break;
 
                case IE_AIRONET_CKIP:
-                       // 0. Check Aironet IE length, it must be larger or equal to 28
-                       // Cisco AP350 used length as 28
-                       // Cisco AP12XX used length as 30
+                       /* 0. Check Aironet IE length, it must be larger or equal to 28 */
+                       /* Cisco AP350 used length as 28 */
+                       /* Cisco AP12XX used length as 30 */
                        if (pEid->Len < (CKIP_NEGOTIATION_LENGTH - 2))
                                break;
 
-                       // 1. Copy CKIP flag byte to buffer for process
+                       /* 1. Copy CKIP flag byte to buffer for process */
                        *pCkipFlag = *(pEid->Octet + 8);
                        break;
 
                case IE_AP_TX_POWER:
-                       // AP Control of Client Transmit Power
-                       //0. Check Aironet IE length, it must be 6
+                       /* AP Control of Client Transmit Power */
+                       /*0. Check Aironet IE length, it must be 6 */
                        if (pEid->Len != 0x06)
                                break;
 
-                       // Get cell power limit in dBm
+                       /* Get cell power limit in dBm */
                        if (NdisEqualMemory(pEid->Octet, CISCO_OUI, 3) == 1)
                                *pAironetCellPowerLimit = *(pEid->Octet + 4);
                        break;
 
-                       // WPA2 & 802.11i RSN
+                       /* WPA2 & 802.11i RSN */
                case IE_RSN:
-                       // There is no OUI for version anymore, check the group cipher OUI before copying
+                       /* There is no OUI for version anymore, check the group cipher OUI before copying */
                        if (RTMPEqualMemory(pEid->Octet + 2, RSN_OUI, 3)) {
-                               // Copy to pVIE which will report to microsoft bssid list.
+                               /* Copy to pVIE which will report to microsoft bssid list. */
                                Ptr = (PUCHAR) pVIE;
                                NdisMoveMemory(Ptr + *LengthVIE, &pEid->Eid,
                                               pEid->Len + 2);
@@ -695,11 +695,11 @@ BOOLEAN PeerBeaconAndProbeRspSanity(IN PRTMP_ADAPTER pAd, IN VOID * Msg, IN ULON
                        break;
                }
 
-               Length = Length + 2 + pEid->Len;        // Eid[1] + Len[1]+ content[Len]
+               Length = Length + 2 + pEid->Len;        /* Eid[1] + Len[1]+ content[Len] */
                pEid = (PEID_STRUCT) ((UCHAR *) pEid + 2 + pEid->Len);
        }
 
-       // For some 11a AP. it did not have the channel EID, patch here
+       /* For some 11a AP. it did not have the channel EID, patch here */
        {
                UCHAR LatchRfChannel = MsgChannel;
                if ((pAd->LatchRfRegs.Channel > 14) && ((Sanity & 0x4) == 0)) {
@@ -756,7 +756,7 @@ BOOLEAN MlmeScanReqSanity(IN PRTMP_ADAPTER pAd,
        }
 }
 
-// IRQL = DISPATCH_LEVEL
+/* IRQL = DISPATCH_LEVEL */
 UCHAR ChannelSanity(IN PRTMP_ADAPTER pAd, IN UCHAR channel)
 {
        int i;
@@ -897,9 +897,9 @@ BOOLEAN MlmeAssocReqSanity(IN PRTMP_ADAPTER pAd,
        MLME_ASSOC_REQ_STRUCT *pInfo;
 
        pInfo = (MLME_ASSOC_REQ_STRUCT *) Msg;
-       *pTimeout = pInfo->Timeout;     // timeout
-       COPY_MAC_ADDR(pApAddr, pInfo->Addr);    // AP address
-       *pCapabilityInfo = pInfo->CapabilityInfo;       // capability info
+       *pTimeout = pInfo->Timeout;     /* timeout */
+       COPY_MAC_ADDR(pApAddr, pInfo->Addr);    /* AP address */
+       *pCapabilityInfo = pInfo->CapabilityInfo;       /* capability info */
        *pListenIntv = pInfo->ListenIntv;
 
        return TRUE;
@@ -954,36 +954,36 @@ NDIS_802_11_NETWORK_TYPE NetworkTypeInUseSanity(IN PBSS_ENTRY pBss)
        NetWorkType = Ndis802_11DS;
 
        if (pBss->Channel <= 14) {
-               //
-               // First check support Rate.
-               //
+               /* */
+               /* First check support Rate. */
+               /* */
                for (i = 0; i < pBss->SupRateLen; i++) {
-                       rate = pBss->SupRate[i] & 0x7f; // Mask out basic rate set bit
+                       rate = pBss->SupRate[i] & 0x7f; /* Mask out basic rate set bit */
                        if ((rate == 2) || (rate == 4) || (rate == 11)
                            || (rate == 22)) {
                                continue;
                        } else {
-                               //
-                               // Otherwise (even rate > 108) means Ndis802_11OFDM24
-                               //
+                               /* */
+                               /* Otherwise (even rate > 108) means Ndis802_11OFDM24 */
+                               /* */
                                NetWorkType = Ndis802_11OFDM24;
                                break;
                        }
                }
 
-               //
-               // Second check Extend Rate.
-               //
+               /* */
+               /* Second check Extend Rate. */
+               /* */
                if (NetWorkType != Ndis802_11OFDM24) {
                        for (i = 0; i < pBss->ExtRateLen; i++) {
-                               rate = pBss->SupRate[i] & 0x7f; // Mask out basic rate set bit
+                               rate = pBss->SupRate[i] & 0x7f; /* Mask out basic rate set bit */
                                if ((rate == 2) || (rate == 4) || (rate == 11)
                                    || (rate == 22)) {
                                        continue;
                                } else {
-                                       //
-                                       // Otherwise (even rate > 108) means Ndis802_11OFDM24
-                                       //
+                                       /* */
+                                       /* Otherwise (even rate > 108) means Ndis802_11OFDM24 */
+                                       /* */
                                        NetWorkType = Ndis802_11OFDM24;
                                        break;
                                }
@@ -1033,22 +1033,22 @@ BOOLEAN PeerWpaMessageSanity(IN PRTMP_ADAPTER pAd,
 
        *((USHORT *) & EapolKeyInfo) = cpu2le16(*((USHORT *) & EapolKeyInfo));
 
-       // Choose WPA2 or not
+       /* Choose WPA2 or not */
        if ((pEntry->AuthMode == Ndis802_11AuthModeWPA2)
            || (pEntry->AuthMode == Ndis802_11AuthModeWPA2PSK))
                bWPA2 = TRUE;
 
-       // 0. Check MsgType
+       /* 0. Check MsgType */
        if ((MsgType > EAPOL_GROUP_MSG_2) || (MsgType < EAPOL_PAIR_MSG_1)) {
                DBGPRINT(RT_DEBUG_ERROR,
                         ("The message type is invalid(%d)! \n", MsgType));
                return FALSE;
        }
-       // 1. Replay counter check
-       if (MsgType == EAPOL_PAIR_MSG_1 || MsgType == EAPOL_PAIR_MSG_3 || MsgType == EAPOL_GROUP_MSG_1) // For supplicant
+       /* 1. Replay counter check */
+       if (MsgType == EAPOL_PAIR_MSG_1 || MsgType == EAPOL_PAIR_MSG_3 || MsgType == EAPOL_GROUP_MSG_1) /* For supplicant */
        {
-               // First validate replay counter, only accept message with larger replay counter.
-               // Let equal pass, some AP start with all zero replay counter
+               /* First validate replay counter, only accept message with larger replay counter. */
+               /* Let equal pass, some AP start with all zero replay counter */
                UCHAR ZeroReplay[LEN_KEY_DESC_REPLAY];
 
                NdisZeroMemory(ZeroReplay, LEN_KEY_DESC_REPLAY);
@@ -1061,18 +1061,18 @@ BOOLEAN PeerWpaMessageSanity(IN PRTMP_ADAPTER pAd,
                      LEN_KEY_DESC_REPLAY) != 0)) {
                        bReplayDiff = TRUE;
                }
-       } else if (MsgType == EAPOL_PAIR_MSG_2 || MsgType == EAPOL_PAIR_MSG_4 || MsgType == EAPOL_GROUP_MSG_2)  // For authenticator
+       } else if (MsgType == EAPOL_PAIR_MSG_2 || MsgType == EAPOL_PAIR_MSG_4 || MsgType == EAPOL_GROUP_MSG_2)  /* For authenticator */
        {
-               // check Replay Counter coresponds to MSG from authenticator, otherwise discard
+               /* check Replay Counter coresponds to MSG from authenticator, otherwise discard */
                if (!NdisEqualMemory
                    (pMsg->KeyDesc.ReplayCounter, pEntry->R_Counter,
                     LEN_KEY_DESC_REPLAY)) {
                        bReplayDiff = TRUE;
                }
        }
-       // Replay Counter different condition
+       /* Replay Counter different condition */
        if (bReplayDiff) {
-               // send wireless event - for replay counter different
+               /* send wireless event - for replay counter different */
                if (pAd->CommonCfg.bWirelessEvent)
                        RTMPSendWirelessEvent(pAd,
                                              IW_REPLAY_COUNTER_DIFF_EVENT_FLAG,
@@ -1094,20 +1094,20 @@ BOOLEAN PeerWpaMessageSanity(IN PRTMP_ADAPTER pAd,
                         LEN_KEY_DESC_REPLAY);
                return FALSE;
        }
-       // 2. Verify MIC except Pairwise Msg1
+       /* 2. Verify MIC except Pairwise Msg1 */
        if (MsgType != EAPOL_PAIR_MSG_1) {
                UCHAR rcvd_mic[LEN_KEY_DESC_MIC];
 
-               // Record the received MIC for check later
+               /* Record the received MIC for check later */
                NdisMoveMemory(rcvd_mic, pMsg->KeyDesc.KeyMic,
                               LEN_KEY_DESC_MIC);
                NdisZeroMemory(pMsg->KeyDesc.KeyMic, LEN_KEY_DESC_MIC);
 
-               if (EapolKeyInfo.KeyDescVer == DESC_TYPE_TKIP)  // TKIP
+               if (EapolKeyInfo.KeyDescVer == DESC_TYPE_TKIP)  /* TKIP */
                {
                        HMAC_MD5(pEntry->PTK, LEN_EAP_MICK, (PUCHAR) pMsg,
                                 MsgLen, mic, MD5_DIGEST_SIZE);
-               } else if (EapolKeyInfo.KeyDescVer == DESC_TYPE_AES)    // AES
+               } else if (EapolKeyInfo.KeyDescVer == DESC_TYPE_AES)    /* AES */
                {
                        HMAC_SHA1(pEntry->PTK, LEN_EAP_MICK, (PUCHAR) pMsg,
                                  MsgLen, digest, SHA1_DIGEST_SIZE);
@@ -1115,7 +1115,7 @@ BOOLEAN PeerWpaMessageSanity(IN PRTMP_ADAPTER pAd,
                }
 
                if (!NdisEqualMemory(rcvd_mic, mic, LEN_KEY_DESC_MIC)) {
-                       // send wireless event - for MIC different
+                       /* send wireless event - for MIC different */
                        if (pAd->CommonCfg.bWirelessEvent)
                                RTMPSendWirelessEvent(pAd,
                                                      IW_MIC_DIFF_EVENT_FLAG,
@@ -1138,16 +1138,16 @@ BOOLEAN PeerWpaMessageSanity(IN PRTMP_ADAPTER pAd,
                        return FALSE;
                }
        }
-       // 1. Decrypt the Key Data field if GTK is included.
-       // 2. Extract the context of the Key Data field if it exist.
-       // The field in pairwise_msg_2_WPA1(WPA2) & pairwise_msg_3_WPA1 is clear.
-       // The field in group_msg_1_WPA1(WPA2) & pairwise_msg_3_WPA2 is encrypted.
+       /* 1. Decrypt the Key Data field if GTK is included. */
+       /* 2. Extract the context of the Key Data field if it exist. */
+       /* The field in pairwise_msg_2_WPA1(WPA2) & pairwise_msg_3_WPA1 is clear. */
+       /* The field in group_msg_1_WPA1(WPA2) & pairwise_msg_3_WPA2 is encrypted. */
        if (CONV_ARRARY_TO_UINT16(pMsg->KeyDesc.KeyDataLen) > 0) {
-               // Decrypt this field
+               /* Decrypt this field */
                if ((MsgType == EAPOL_PAIR_MSG_3 && bWPA2)
                    || (MsgType == EAPOL_GROUP_MSG_1)) {
                        if ((EapolKeyInfo.KeyDescVer == DESC_TYPE_AES)) {
-                               // AES
+                               /* AES */
                                AES_GTK_KEY_UNWRAP(&pEntry->PTK[16], KEYDATA,
                                                   CONV_ARRARY_TO_UINT16(pMsg->
                                                                         KeyDesc.
@@ -1156,17 +1156,17 @@ BOOLEAN PeerWpaMessageSanity(IN PRTMP_ADAPTER pAd,
                        } else {
                                INT i;
                                UCHAR Key[32];
-                               // Decrypt TKIP GTK
-                               // Construct 32 bytes RC4 Key
+                               /* Decrypt TKIP GTK */
+                               /* Construct 32 bytes RC4 Key */
                                NdisMoveMemory(Key, pMsg->KeyDesc.KeyIv, 16);
                                NdisMoveMemory(&Key[16], &pEntry->PTK[16], 16);
                                ARCFOUR_INIT(&pAd->PrivateInfo.WEPCONTEXT, Key,
                                             32);
-                               //discard first 256 bytes
+                               /*discard first 256 bytes */
                                for (i = 0; i < 256; i++)
                                        ARCFOUR_BYTE(&pAd->PrivateInfo.
                                                     WEPCONTEXT);
-                               // Decrypt GTK. Becareful, there is no ICV to check the result is correct or not
+                               /* Decrypt GTK. Becareful, there is no ICV to check the result is correct or not */
                                ARCFOUR_DECRYPT(&pAd->PrivateInfo.WEPCONTEXT,
                                                KEYDATA, pMsg->KeyDesc.KeyData,
                                                CONV_ARRARY_TO_UINT16(pMsg->
@@ -1187,10 +1187,10 @@ BOOLEAN PeerWpaMessageSanity(IN PRTMP_ADAPTER pAd,
                        return TRUE;
                }
 
-               // Parse Key Data field to
-               // 1. verify RSN IE for pairwise_msg_2_WPA1(WPA2) ,pairwise_msg_3_WPA1(WPA2)
-               // 2. verify KDE format for pairwise_msg_3_WPA2, group_msg_1_WPA2
-               // 3. update shared key for pairwise_msg_3_WPA2, group_msg_1_WPA1(WPA2)
+               /* Parse Key Data field to */
+               /* 1. verify RSN IE for pairwise_msg_2_WPA1(WPA2) ,pairwise_msg_3_WPA1(WPA2) */
+               /* 2. verify KDE format for pairwise_msg_3_WPA2, group_msg_1_WPA2 */
+               /* 3. update shared key for pairwise_msg_3_WPA2, group_msg_1_WPA1(WPA2) */
                if (!RTMPParseEapolKeyData(pAd, KEYDATA,
                                           CONV_ARRARY_TO_UINT16(pMsg->KeyDesc.
                                                                 KeyDataLen),
index 9934a1b..c29e087 100644 (file)
 */
 #include "../rt_config.h"
 
-// 2.4 Ghz channel plan index in the TxPower arrays.
-#define        BG_BAND_REGION_0_START  0       // 1,2,3,4,5,6,7,8,9,10,11
+/* 2.4 Ghz channel plan index in the TxPower arrays. */
+#define        BG_BAND_REGION_0_START  0       /* 1,2,3,4,5,6,7,8,9,10,11 */
 #define        BG_BAND_REGION_0_SIZE   11
-#define        BG_BAND_REGION_1_START  0       // 1,2,3,4,5,6,7,8,9,10,11,12,13
+#define        BG_BAND_REGION_1_START  0       /* 1,2,3,4,5,6,7,8,9,10,11,12,13 */
 #define        BG_BAND_REGION_1_SIZE   13
-#define        BG_BAND_REGION_2_START  9       // 10,11
+#define        BG_BAND_REGION_2_START  9       /* 10,11 */
 #define        BG_BAND_REGION_2_SIZE   2
-#define        BG_BAND_REGION_3_START  9       // 10,11,12,13
+#define        BG_BAND_REGION_3_START  9       /* 10,11,12,13 */
 #define        BG_BAND_REGION_3_SIZE   4
-#define        BG_BAND_REGION_4_START  13      // 14
+#define        BG_BAND_REGION_4_START  13      /* 14 */
 #define        BG_BAND_REGION_4_SIZE   1
-#define        BG_BAND_REGION_5_START  0       // 1,2,3,4,5,6,7,8,9,10,11,12,13,14
+#define        BG_BAND_REGION_5_START  0       /* 1,2,3,4,5,6,7,8,9,10,11,12,13,14 */
 #define        BG_BAND_REGION_5_SIZE   14
-#define        BG_BAND_REGION_6_START  2       // 3,4,5,6,7,8,9
+#define        BG_BAND_REGION_6_START  2       /* 3,4,5,6,7,8,9 */
 #define        BG_BAND_REGION_6_SIZE   7
-#define        BG_BAND_REGION_7_START  4       // 5,6,7,8,9,10,11,12,13
+#define        BG_BAND_REGION_7_START  4       /* 5,6,7,8,9,10,11,12,13 */
 #define        BG_BAND_REGION_7_SIZE   9
-#define        BG_BAND_REGION_31_START 0       // 1,2,3,4,5,6,7,8,9,10,11,12,13,14
+#define        BG_BAND_REGION_31_START 0       /* 1,2,3,4,5,6,7,8,9,10,11,12,13,14 */
 #define        BG_BAND_REGION_31_SIZE  14
 
-// 5 Ghz channel plan index in the TxPower arrays.
+/* 5 Ghz channel plan index in the TxPower arrays. */
 UCHAR A_BAND_REGION_0_CHANNEL_LIST[] =
     { 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 };
 UCHAR A_BAND_REGION_1_CHANNEL_LIST[] =
@@ -90,7 +90,7 @@ UCHAR A_BAND_REGION_14_CHANNEL_LIST[] =
 153, 157, 161, 165 };
 UCHAR A_BAND_REGION_15_CHANNEL_LIST[] = { 149, 153, 157, 161, 165, 169, 173 };
 
-//BaSizeArray follows the 802.11n definition as MaxRxFactor.  2^(13+factor) bytes. When factor =0, it's about Ba buffer size =8.
+/*BaSizeArray follows the 802.11n definition as MaxRxFactor.  2^(13+factor) bytes. When factor =0, it's about Ba buffer size =8. */
 UCHAR BaSizeArray[4] = { 8, 16, 32, 64 };
 
 /*
@@ -113,76 +113,76 @@ VOID BuildChannelList(IN PRTMP_ADAPTER pAd)
        NdisZeroMemory(pAd->ChannelList,
                       MAX_NUM_OF_CHANNELS * sizeof(CHANNEL_TX_POWER));
 
-       // if not 11a-only mode, channel list starts from 2.4Ghz band
+       /* if not 11a-only mode, channel list starts from 2.4Ghz band */
        if ((pAd->CommonCfg.PhyMode != PHY_11A)
            && (pAd->CommonCfg.PhyMode != PHY_11AN_MIXED)
            && (pAd->CommonCfg.PhyMode != PHY_11N_5G)
            ) {
                switch (pAd->CommonCfg.CountryRegion & 0x7f) {
-               case REGION_0_BG_BAND:  // 1 -11
+               case REGION_0_BG_BAND:  /* 1 -11 */
                        NdisMoveMemory(&pAd->ChannelList[index],
                                       &pAd->TxPower[BG_BAND_REGION_0_START],
                                       sizeof(CHANNEL_TX_POWER) *
                                       BG_BAND_REGION_0_SIZE);
                        index += BG_BAND_REGION_0_SIZE;
                        break;
-               case REGION_1_BG_BAND:  // 1 - 13
+               case REGION_1_BG_BAND:  /* 1 - 13 */
                        NdisMoveMemory(&pAd->ChannelList[index],
                                       &pAd->TxPower[BG_BAND_REGION_1_START],
                                       sizeof(CHANNEL_TX_POWER) *
                                       BG_BAND_REGION_1_SIZE);
                        index += BG_BAND_REGION_1_SIZE;
                        break;
-               case REGION_2_BG_BAND:  // 10 - 11
+               case REGION_2_BG_BAND:  /* 10 - 11 */
                        NdisMoveMemory(&pAd->ChannelList[index],
                                       &pAd->TxPower[BG_BAND_REGION_2_START],
                                       sizeof(CHANNEL_TX_POWER) *
                                       BG_BAND_REGION_2_SIZE);
                        index += BG_BAND_REGION_2_SIZE;
                        break;
-               case REGION_3_BG_BAND:  // 10 - 13
+               case REGION_3_BG_BAND:  /* 10 - 13 */
                        NdisMoveMemory(&pAd->ChannelList[index],
                                       &pAd->TxPower[BG_BAND_REGION_3_START],
                                       sizeof(CHANNEL_TX_POWER) *
                                       BG_BAND_REGION_3_SIZE);
                        index += BG_BAND_REGION_3_SIZE;
                        break;
-               case REGION_4_BG_BAND:  // 14
+               case REGION_4_BG_BAND:  /* 14 */
                        NdisMoveMemory(&pAd->ChannelList[index],
                                       &pAd->TxPower[BG_BAND_REGION_4_START],
                                       sizeof(CHANNEL_TX_POWER) *
                                       BG_BAND_REGION_4_SIZE);
                        index += BG_BAND_REGION_4_SIZE;
                        break;
-               case REGION_5_BG_BAND:  // 1 - 14
+               case REGION_5_BG_BAND:  /* 1 - 14 */
                        NdisMoveMemory(&pAd->ChannelList[index],
                                       &pAd->TxPower[BG_BAND_REGION_5_START],
                                       sizeof(CHANNEL_TX_POWER) *
                                       BG_BAND_REGION_5_SIZE);
                        index += BG_BAND_REGION_5_SIZE;
                        break;
-               case REGION_6_BG_BAND:  // 3 - 9
+               case REGION_6_BG_BAND:  /* 3 - 9 */
                        NdisMoveMemory(&pAd->ChannelList[index],
                                       &pAd->TxPower[BG_BAND_REGION_6_START],
                                       sizeof(CHANNEL_TX_POWER) *
                                       BG_BAND_REGION_6_SIZE);
                        index += BG_BAND_REGION_6_SIZE;
                        break;
-               case REGION_7_BG_BAND:  // 5 - 13
+               case REGION_7_BG_BAND:  /* 5 - 13 */
                        NdisMoveMemory(&pAd->ChannelList[index],
                                       &pAd->TxPower[BG_BAND_REGION_7_START],
                                       sizeof(CHANNEL_TX_POWER) *
                                       BG_BAND_REGION_7_SIZE);
                        index += BG_BAND_REGION_7_SIZE;
                        break;
-               case REGION_31_BG_BAND: // 1 - 14
+               case REGION_31_BG_BAND: /* 1 - 14 */
                        NdisMoveMemory(&pAd->ChannelList[index],
                                       &pAd->TxPower[BG_BAND_REGION_31_START],
                                       sizeof(CHANNEL_TX_POWER) *
                                       BG_BAND_REGION_31_SIZE);
                        index += BG_BAND_REGION_31_SIZE;
                        break;
-               default:        // Error. should never happen
+               default:        /* Error. should never happen */
                        break;
                }
                for (i = 0; i < index; i++)
@@ -295,7 +295,7 @@ VOID BuildChannelList(IN PRTMP_ADAPTER pAd)
                            sizeof(UCHAR);
                        pChannelList = A_BAND_REGION_15_CHANNEL_LIST;
                        break;
-               default:        // Error. should never happen
+               default:        /* Error. should never happen */
                        DBGPRINT(RT_DEBUG_WARN,
                                 ("countryregion=%d not support",
                                  pAd->CommonCfg.CountryRegionForABand));
@@ -411,12 +411,12 @@ UCHAR NextChannel(IN PRTMP_ADAPTER pAd, IN UCHAR channel)
 VOID ChangeToCellPowerLimit(IN PRTMP_ADAPTER pAd,
                            IN UCHAR AironetCellPowerLimit)
 {
-       //valud 0xFF means that hasn't found power limit information
-       //from the AP's Beacon/Probe response.
+       /*valud 0xFF means that hasn't found power limit information */
+       /*from the AP's Beacon/Probe response. */
        if (AironetCellPowerLimit == 0xFF)
                return;
 
-       if (AironetCellPowerLimit < 6)  //Used Lowest Power Percentage.
+       if (AironetCellPowerLimit < 6)  /*Used Lowest Power Percentage. */
                pAd->CommonCfg.TxPowerPercentage = 6;
        else if (AironetCellPowerLimit < 9)
                pAd->CommonCfg.TxPowerPercentage = 10;
@@ -427,7 +427,7 @@ VOID ChangeToCellPowerLimit(IN PRTMP_ADAPTER pAd,
        else if (AironetCellPowerLimit < 15)
                pAd->CommonCfg.TxPowerPercentage = 75;
        else
-               pAd->CommonCfg.TxPowerPercentage = 100; //else used maximum
+               pAd->CommonCfg.TxPowerPercentage = 100; /*else used maximum */
 
        if (pAd->CommonCfg.TxPowerPercentage > pAd->CommonCfg.TxPowerDefault)
                pAd->CommonCfg.TxPowerPercentage =
@@ -439,7 +439,7 @@ CHAR ConvertToRssi(IN PRTMP_ADAPTER pAd, IN CHAR Rssi, IN UCHAR RssiNumber)
 {
        UCHAR RssiOffset, LNAGain;
 
-       // Rssi equals to zero should be an invalid value
+       /* Rssi equals to zero should be an invalid value */
        if (Rssi == 0)
                return -99;
 
@@ -510,11 +510,11 @@ VOID ScanNextChannel(IN PRTMP_ADAPTER pAd)
                }
 
                {
-                       //
-                       // To prevent data lost.
-                       // Send an NULL data with turned PSM bit on to current associated AP before SCAN progress.
-                       // Now, we need to send an NULL data with turned PSM bit off to AP, when scan progress done
-                       //
+                       /* */
+                       /* To prevent data lost. */
+                       /* Send an NULL data with turned PSM bit on to current associated AP before SCAN progress. */
+                       /* Now, we need to send an NULL data with turned PSM bit off to AP, when scan progress done */
+                       /* */
                        if (OPSTATUS_TEST_FLAG
                            (pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)
                            && (INFRA_ON(pAd))) {
@@ -532,7 +532,7 @@ VOID ScanNextChannel(IN PRTMP_ADAPTER pAd)
                                        pHdr80211->FC.PwrMgmt =
                                            (pAd->StaCfg.Psm == PWR_SAVE);
 
-                                       // Send using priority queue
+                                       /* Send using priority queue */
                                        MiniportMMRequest(pAd, 0, pOutBuffer,
                                                          sizeof
                                                          (HEADER_802_11));
@@ -557,14 +557,14 @@ VOID ScanNextChannel(IN PRTMP_ADAPTER pAd)
                pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
                MlmeCntlConfirm(pAd, MT2_SCAN_CONF, MLME_FAIL_NO_RESOURCE);
        }
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
        else {
                {
-                       // BBP and RF are not accessible in PS mode, we has to wake them up first
+                       /* BBP and RF are not accessible in PS mode, we has to wake them up first */
                        if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
                                AsicForceWakeup(pAd, TRUE);
 
-                       // leave PSM during scanning. otherwise we may lost ProbeRsp & BEACON
+                       /* leave PSM during scanning. otherwise we may lost ProbeRsp & BEACON */
                        if (pAd->StaCfg.Psm == PWR_SAVE)
                                RTMP_SET_PSM_BIT(pAd, PWR_ACTIVE);
                }
@@ -584,18 +584,18 @@ VOID ScanNextChannel(IN PRTMP_ADAPTER pAd)
                        }
                }
 
-               //Global country domain(ch1-11:active scan, ch12-14 passive scan)
+               /*Global country domain(ch1-11:active scan, ch12-14 passive scan) */
                if ((pAd->MlmeAux.Channel <= 14) && (pAd->MlmeAux.Channel >= 12)
                    && ((pAd->CommonCfg.CountryRegion & 0x7f) ==
                        REGION_31_BG_BAND)) {
                        ScanType = SCAN_PASSIVE;
                }
-               // We need to shorten active scan time in order for WZC connect issue
-               // Chnage the channel scan time for CISCO stuff based on its IAPP announcement
+               /* We need to shorten active scan time in order for WZC connect issue */
+               /* Chnage the channel scan time for CISCO stuff based on its IAPP announcement */
                if (ScanType == FAST_SCAN_ACTIVE)
                        RTMPSetTimer(&pAd->MlmeAux.ScanTimer,
                                     FAST_ACTIVE_SCAN_TIME);
-               else            // must be SCAN_PASSIVE or SCAN_ACTIVE
+               else            /* must be SCAN_PASSIVE or SCAN_ACTIVE */
                {
                        if ((pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED)
                            || (pAd->CommonCfg.PhyMode == PHY_11ABGN_MIXED)
@@ -615,7 +615,7 @@ VOID ScanNextChannel(IN PRTMP_ADAPTER pAd)
                if ((ScanType == SCAN_ACTIVE)
                    || (ScanType == FAST_SCAN_ACTIVE)
                    ) {
-                       NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); //Get an unused nonpaged memory
+                       NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); /*Get an unused nonpaged memory */
                        if (NStatus != NDIS_STATUS_SUCCESS) {
                                DBGPRINT(RT_DEBUG_TRACE,
                                         ("SYNC - ScanNextChannel() allocate memory fail\n"));
@@ -631,7 +631,7 @@ VOID ScanNextChannel(IN PRTMP_ADAPTER pAd)
 
                                return;
                        }
-                       // There is no need to send broadcast probe request if active scan is in effect.
+                       /* There is no need to send broadcast probe request if active scan is in effect. */
                        if ((ScanType == SCAN_ACTIVE)
                            || (ScanType == FAST_SCAN_ACTIVE)
                            )
@@ -694,7 +694,7 @@ VOID ScanNextChannel(IN PRTMP_ADAPTER pAd)
                        MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
                        MlmeFreeMemory(pAd, pOutBuffer);
                }
-               // For SCAN_CISCO_PASSIVE, do nothing and silently wait for beacon or other probe reponse
+               /* For SCAN_CISCO_PASSIVE, do nothing and silently wait for beacon or other probe reponse */
 
                pAd->Mlme.SyncMachine.CurrState = SCAN_LISTEN;
        }
index b93c3fa..97f0543 100644 (file)
@@ -37,7 +37,7 @@
 
 #include       "../rt_config.h"
 
-// Rotation functions on 32 bit values
+/* Rotation functions on 32 bit values */
 #define ROL32( A, n ) \
        ( ((A) << (n)) | ( ((A)>>(32-(n))) & ( (1UL << (n)) - 1 ) ) )
 #define ROR32( A, n ) ROL32( (A), 32-(n) )
@@ -112,9 +112,9 @@ UINT Tkip_Sbox_Upper[256] = {
        0x82, 0x29, 0x5A, 0x1E, 0x7B, 0xA8, 0x6D, 0x2C
 };
 
-//
-// Expanded IV for TKIP function.
-//
+/* */
+/* Expanded IV for TKIP function. */
+/* */
 typedef struct PACKED _IV_CONTROL_ {
        union PACKED {
                struct PACKED {
@@ -216,10 +216,10 @@ VOID RTMPTkipPutUInt32(IN OUT PUCHAR pDst, IN ULONG val)
 */
 VOID RTMPTkipSetMICKey(IN PTKIP_KEY_INFO pTkip, IN PUCHAR pMICKey)
 {
-       // Set the key
+       /* Set the key */
        pTkip->K0 = RTMPTkipGetUInt32(pMICKey);
        pTkip->K1 = RTMPTkipGetUInt32(pMICKey + 4);
-       // and reset the message
+       /* and reset the message */
        pTkip->L = pTkip->K0;
        pTkip->R = pTkip->K1;
        pTkip->nBytesInM = 0;
@@ -247,10 +247,10 @@ VOID RTMPTkipSetMICKey(IN PTKIP_KEY_INFO pTkip, IN PUCHAR pMICKey)
 */
 VOID RTMPTkipAppendByte(IN PTKIP_KEY_INFO pTkip, IN UCHAR uChar)
 {
-       // Append the byte to our word-sized buffer
+       /* Append the byte to our word-sized buffer */
        pTkip->M |= (uChar << (8 * pTkip->nBytesInM));
        pTkip->nBytesInM++;
-       // Process the word if it is full.
+       /* Process the word if it is full. */
        if (pTkip->nBytesInM >= 4) {
                pTkip->L ^= pTkip->M;
                pTkip->R ^= ROL32(pTkip->L, 17);
@@ -263,7 +263,7 @@ VOID RTMPTkipAppendByte(IN PTKIP_KEY_INFO pTkip, IN UCHAR uChar)
                pTkip->L += pTkip->R;
                pTkip->R ^= ROR32(pTkip->L, 2);
                pTkip->L += pTkip->R;
-               // Clear the buffer
+               /* Clear the buffer */
                pTkip->M = 0;
                pTkip->nBytesInM = 0;
        }
@@ -291,7 +291,7 @@ VOID RTMPTkipAppendByte(IN PTKIP_KEY_INFO pTkip, IN UCHAR uChar)
 */
 VOID RTMPTkipAppend(IN PTKIP_KEY_INFO pTkip, IN PUCHAR pSrc, IN UINT nBytes)
 {
-       // This is simple
+       /* This is simple */
        while (nBytes > 0) {
                RTMPTkipAppendByte(pTkip, *pSrc++);
                nBytes--;
@@ -318,17 +318,17 @@ VOID RTMPTkipAppend(IN PTKIP_KEY_INFO pTkip, IN PUCHAR pSrc, IN UINT nBytes)
 */
 VOID RTMPTkipGetMIC(IN PTKIP_KEY_INFO pTkip)
 {
-       // Append the minimum padding
+       /* Append the minimum padding */
        RTMPTkipAppendByte(pTkip, 0x5a);
        RTMPTkipAppendByte(pTkip, 0);
        RTMPTkipAppendByte(pTkip, 0);
        RTMPTkipAppendByte(pTkip, 0);
        RTMPTkipAppendByte(pTkip, 0);
-       // and then zeroes until the length is a multiple of 4
+       /* and then zeroes until the length is a multiple of 4 */
        while (pTkip->nBytesInM != 0) {
                RTMPTkipAppendByte(pTkip, 0);
        }
-       // The appendByte function has already computed the result.
+       /* The appendByte function has already computed the result. */
        RTMPTkipPutUInt32(pTkip->MIC, pTkip->L);
        RTMPTkipPutUInt32(pTkip->MIC + 4, pTkip->R);
 }
@@ -364,15 +364,15 @@ VOID RTMPInitTkipEngine(IN PRTMP_ADAPTER pAd,
 {
        TKIP_IV tkipIv;
 
-       // Prepare 8 bytes TKIP encapsulation for MPDU
+       /* Prepare 8 bytes TKIP encapsulation for MPDU */
        NdisZeroMemory(&tkipIv, sizeof(TKIP_IV));
        tkipIv.IV16.field.rc0 = *(pTSC + 1);
        tkipIv.IV16.field.rc1 = (tkipIv.IV16.field.rc0 | 0x20) & 0x7f;
        tkipIv.IV16.field.rc2 = *pTSC;
-       tkipIv.IV16.field.CONTROL.field.ExtIV = 1;      // 0: non-extended IV, 1: an extended IV
+       tkipIv.IV16.field.CONTROL.field.ExtIV = 1;      /* 0: non-extended IV, 1: an extended IV */
        tkipIv.IV16.field.CONTROL.field.KeyID = KeyId;
-//      tkipIv.IV32 = *(PULONG)(pTSC + 2);
-       NdisMoveMemory(&tkipIv.IV32, (pTSC + 2), 4);    // Copy IV
+/*      tkipIv.IV32 = *(PULONG)(pTSC + 2); */
+       NdisMoveMemory(&tkipIv.IV32, (pTSC + 2), 4);    /* Copy IV */
 
        *pIV16 = tkipIv.IV16.word;
        *pIV32 = tkipIv.IV32;
@@ -406,13 +406,13 @@ VOID RTMPInitMICEngine(IN PRTMP_ADAPTER pAd,
 {
        ULONG Priority = UserPriority;
 
-       // Init MIC value calculation
+       /* Init MIC value calculation */
        RTMPTkipSetMICKey(&pAd->PrivateInfo.Tx, pMICKey);
-       // DA
+       /* DA */
        RTMPTkipAppend(&pAd->PrivateInfo.Tx, pDA, MAC_ADDR_LEN);
-       // SA
+       /* SA */
        RTMPTkipAppend(&pAd->PrivateInfo.Tx, pSA, MAC_ADDR_LEN);
-       // Priority + 3 bytes of 0
+       /* Priority + 3 bytes of 0 */
        RTMPTkipAppend(&pAd->PrivateInfo.Tx, (PUCHAR) & Priority, 4);
 }
 
@@ -450,28 +450,28 @@ BOOLEAN RTMPTkipCompareMICValue(IN PRTMP_ADAPTER pAd,
        UCHAR OldMic[8];
        ULONG Priority = UserPriority;
 
-       // Init MIC value calculation
+       /* Init MIC value calculation */
        RTMPTkipSetMICKey(&pAd->PrivateInfo.Rx, pMICKey);
-       // DA
+       /* DA */
        RTMPTkipAppend(&pAd->PrivateInfo.Rx, pDA, MAC_ADDR_LEN);
-       // SA
+       /* SA */
        RTMPTkipAppend(&pAd->PrivateInfo.Rx, pSA, MAC_ADDR_LEN);
-       // Priority + 3 bytes of 0
+       /* Priority + 3 bytes of 0 */
        RTMPTkipAppend(&pAd->PrivateInfo.Rx, (PUCHAR) & Priority, 4);
 
-       // Calculate MIC value from plain text data
+       /* Calculate MIC value from plain text data */
        RTMPTkipAppend(&pAd->PrivateInfo.Rx, pSrc, Len);
 
-       // Get MIC valude from received frame
+       /* Get MIC valude from received frame */
        NdisMoveMemory(OldMic, pSrc + Len, 8);
 
-       // Get MIC value from decrypted plain data
+       /* Get MIC value from decrypted plain data */
        RTMPTkipGetMIC(&pAd->PrivateInfo.Rx);
 
-       // Move MIC value from MSDU, this steps should move to data path.
-       // Since the MIC value might cross MPDUs.
+       /* Move MIC value from MSDU, this steps should move to data path. */
+       /* Since the MIC value might cross MPDUs. */
        if (!NdisEqualMemory(pAd->PrivateInfo.Rx.MIC, OldMic, 8)) {
-               DBGPRINT_RAW(RT_DEBUG_ERROR, ("RTMPTkipCompareMICValue(): TKIP MIC Error !\n"));        //MIC error.
+               DBGPRINT_RAW(RT_DEBUG_ERROR, ("RTMPTkipCompareMICValue(): TKIP MIC Error !\n"));        /*MIC error. */
 
                return (FALSE);
        }
@@ -517,7 +517,7 @@ VOID RTMPCalculateMICValue(IN PRTMP_ADAPTER pAd,
        UserPriority = RTMP_GET_PACKET_UP(pPacket);
        pSrc = pSrcBufVA;
 
-       // determine if this is a vlan packet
+       /* determine if this is a vlan packet */
        if (((*(pSrc + 12) << 8) + *(pSrc + 13)) == 0x8100)
                vlan_offset = 4;
 
@@ -528,9 +528,9 @@ VOID RTMPCalculateMICValue(IN PRTMP_ADAPTER pAd,
        }
 
        if (pEncap != NULL) {
-               // LLC encapsulation
+               /* LLC encapsulation */
                RTMPTkipAppend(&pAd->PrivateInfo.Tx, pEncap, 6);
-               // Protocol Type
+               /* Protocol Type */
                RTMPTkipAppend(&pAd->PrivateInfo.Tx, pSrc + 12 + vlan_offset,
                               2);
        }
@@ -541,11 +541,11 @@ VOID RTMPCalculateMICValue(IN PRTMP_ADAPTER pAd,
                        RTMPTkipAppend(&pAd->PrivateInfo.Tx, pSrc, SrcBufLen);
                }
 
-               break;          // No need handle next packet
+               break;          /* No need handle next packet */
 
-       } while (TRUE);         // End of copying payload
+       } while (TRUE);         /* End of copying payload */
 
-       // Compute the final MIC Value
+       /* Compute the final MIC Value */
        RTMPTkipGetMIC(&pAd->PrivateInfo.Tx);
 }
 
@@ -694,10 +694,10 @@ VOID RTMPTkipMixKey(UCHAR * key, UCHAR * ta, ULONG pnl,   /* Least significant 16
        rc4key[15] = (ppk5 >> 8) % 256;
 }
 
-//
-// TRUE: Success!
-// FALSE: Decrypt Error!
-//
+/* */
+/* TRUE: Success! */
+/* FALSE: Decrypt Error! */
+/* */
 BOOLEAN RTMPSoftDecryptTKIP(IN PRTMP_ADAPTER pAd,
                            IN PUCHAR pData,
                            IN ULONG DataByteCnt,
@@ -721,7 +721,7 @@ BOOLEAN RTMPSoftDecryptTKIP(IN PRTMP_ADAPTER pAd,
        UCHAR DA[MAC_ADDR_LEN];
        UCHAR SA[MAC_ADDR_LEN];
        UCHAR RC4Key[16];
-       UINT p1k[5];            //for mix_key;
+       UINT p1k[5];            /*for mix_key; */
        ULONG pnl;              /* Least significant 16 bits of PN */
        ULONG pnh;              /* Most significant 32 bits of PN */
        UINT num_blocks;
@@ -778,7 +778,7 @@ BOOLEAN RTMPSoftDecryptTKIP(IN PRTMP_ADAPTER pAd,
        if (to_ds == 0 && from_ds == 1) {
                NdisMoveMemory(DA, pData + 4, MAC_ADDR_LEN);
                NdisMoveMemory(SA, pData + 16, MAC_ADDR_LEN);
-               NdisMoveMemory(TA, pData + 10, MAC_ADDR_LEN);   //BSSID
+               NdisMoveMemory(TA, pData + 10, MAC_ADDR_LEN);   /*BSSID */
        } else if (to_ds == 0 && from_ds == 0) {
                NdisMoveMemory(TA, pData + 10, MAC_ADDR_LEN);
                NdisMoveMemory(DA, pData + 4, MAC_ADDR_LEN);
@@ -806,11 +806,11 @@ BOOLEAN RTMPSoftDecryptTKIP(IN PRTMP_ADAPTER pAd,
        ARCFOUR_DECRYPT(&ArcFourContext, pData + HeaderLen,
                        pData + HeaderLen + 8, DataByteCnt - HeaderLen - 8);
        NdisMoveMemory(&trailfcs, pData + DataByteCnt - 8 - 4, 4);
-       crc32 = RTMP_CALC_FCS32(PPPINITFCS32, pData + HeaderLen, DataByteCnt - HeaderLen - 8 - 4);      //Skip IV+EIV 8 bytes & Skip last 4 bytes(FCS).
+       crc32 = RTMP_CALC_FCS32(PPPINITFCS32, pData + HeaderLen, DataByteCnt - HeaderLen - 8 - 4);      /*Skip IV+EIV 8 bytes & Skip last 4 bytes(FCS). */
        crc32 ^= 0xffffffff;    /* complement */
 
        if (crc32 != cpu2le32(trailfcs)) {
-               DBGPRINT(RT_DEBUG_TRACE, ("RTMPSoftDecryptTKIP, WEP Data ICV Error !\n"));      //ICV error.
+               DBGPRINT(RT_DEBUG_TRACE, ("RTMPSoftDecryptTKIP, WEP Data ICV Error !\n"));      /*ICV error. */
 
                return (FALSE);
        }
@@ -824,10 +824,10 @@ BOOLEAN RTMPSoftDecryptTKIP(IN PRTMP_ADAPTER pAd,
        NdisMoveMemory(MIC, pAd->PrivateInfo.Tx.MIC, 8);
 
        if (!NdisEqualMemory(MIC, TrailMIC, 8)) {
-               DBGPRINT(RT_DEBUG_ERROR, ("RTMPSoftDecryptTKIP, WEP Data MIC Error !\n"));      //MIC error.
-               //RTMPReportMicError(pAd, &pWpaKey[KeyID]);     // marked by AlbertY @ 20060630
+               DBGPRINT(RT_DEBUG_ERROR, ("RTMPSoftDecryptTKIP, WEP Data MIC Error !\n"));      /*MIC error. */
+               /*RTMPReportMicError(pAd, &pWpaKey[KeyID]);     // marked by AlbertY @ 20060630 */
                return (FALSE);
        }
-       //DBGPRINT(RT_DEBUG_TRACE, "RTMPSoftDecryptTKIP Decript done!!\n");
+       /*DBGPRINT(RT_DEBUG_TRACE, "RTMPSoftDecryptTKIP Decript done!!\n"); */
        return TRUE;
 }
index 4f407e9..db40139 100644 (file)
@@ -141,25 +141,25 @@ VOID RTMPInitWepEngine(IN PRTMP_ADAPTER pAd,
 {
        UINT i;
        UCHAR WEPKEY[] = {
-               //IV
+               /*IV */
                0x00, 0x11, 0x22,
-               //WEP KEY
+               /*WEP KEY */
                0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99,
                    0xAA, 0xBB, 0xCC
        };
 
-       pAd->PrivateInfo.FCSCRC32 = PPPINITFCS32;       //Init crc32.
+       pAd->PrivateInfo.FCSCRC32 = PPPINITFCS32;       /*Init crc32. */
 
        {
                NdisMoveMemory(WEPKEY + 3, pKey, KeyLen);
 
                for (i = 0; i < 3; i++)
-                       WEPKEY[i] = RandomByte(pAd);    //Call mlme RandomByte() function.
-               ARCFOUR_INIT(&pAd->PrivateInfo.WEPCONTEXT, WEPKEY, KeyLen + 3); //INIT SBOX, KEYLEN+3(IV)
+                       WEPKEY[i] = RandomByte(pAd);    /*Call mlme RandomByte() function. */
+               ARCFOUR_INIT(&pAd->PrivateInfo.WEPCONTEXT, WEPKEY, KeyLen + 3); /*INIT SBOX, KEYLEN+3(IV) */
 
-               NdisMoveMemory(pDest, WEPKEY, 3);       //Append Init Vector
+               NdisMoveMemory(pDest, WEPKEY, 3);       /*Append Init Vector */
        }
-       *(pDest + 3) = (KeyId << 6);    //Append KEYID
+       *(pDest + 3) = (KeyId << 6);    /*Append KEYID */
 
 }
 
@@ -219,16 +219,16 @@ BOOLEAN RTMPSoftDecryptWEP(IN PRTMP_ADAPTER pAd,
        UINT crc32;
        UCHAR KeyIdx;
        UCHAR WEPKEY[] = {
-               //IV
+               /*IV */
                0x00, 0x11, 0x22,
-               //WEP KEY
+               /*WEP KEY */
                0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99,
                    0xAA, 0xBB, 0xCC
        };
        UCHAR *pPayload = (UCHAR *) pData + LENGTH_802_11;
        ULONG payload_len = DataByteCnt - LENGTH_802_11;
 
-       NdisMoveMemory(WEPKEY, pPayload, 3);    //Get WEP IV
+       NdisMoveMemory(WEPKEY, pPayload, 3);    /*Get WEP IV */
 
        KeyIdx = (*(pPayload + 3) & 0xc0) >> 6;
        if (pGroupKey[KeyIdx].KeyLen == 0)
@@ -241,11 +241,11 @@ BOOLEAN RTMPSoftDecryptWEP(IN PRTMP_ADAPTER pAd,
        ARCFOUR_DECRYPT(&pAd->PrivateInfo.WEPCONTEXT, pPayload, pPayload + 4,
                        payload_len - 4);
        NdisMoveMemory(&trailfcs, pPayload + payload_len - 8, 4);
-       crc32 = RTMP_CALC_FCS32(PPPINITFCS32, pPayload, payload_len - 8);       //Skip last 4 bytes(FCS).
+       crc32 = RTMP_CALC_FCS32(PPPINITFCS32, pPayload, payload_len - 8);       /*Skip last 4 bytes(FCS). */
        crc32 ^= 0xffffffff;    /* complement */
 
        if (crc32 != cpu2le32(trailfcs)) {
-               DBGPRINT(RT_DEBUG_TRACE, ("! WEP Data CRC Error !\n")); //CRC error.
+               DBGPRINT(RT_DEBUG_TRACE, ("! WEP Data CRC Error !\n")); /*CRC error. */
                return (FALSE);
        }
        return (TRUE);
@@ -411,7 +411,7 @@ VOID WPAARCFOUR_ENCRYPT(IN PARCFOURCONTEXT Ctx,
                        IN PUCHAR pDest, IN PUCHAR pSrc, IN UINT Len)
 {
        UINT i;
-       //discard first 256 bytes
+       /*discard first 256 bytes */
        for (i = 0; i < 256; i++)
                ARCFOUR_BYTE(Ctx);
 
index 4d070af..6940d77 100644 (file)
@@ -36,7 +36,7 @@
        Paul Lin        03-11-28                Modify for supplicant
 */
 #include "../rt_config.h"
-// WPA OUI
+/* WPA OUI */
 UCHAR OUI_WPA_NONE_AKM[4] = { 0x00, 0x50, 0xF2, 0x00 };
 UCHAR OUI_WPA_VERSION[4] = { 0x00, 0x50, 0xF2, 0x01 };
 UCHAR OUI_WPA_WEP40[4] = { 0x00, 0x50, 0xF2, 0x01 };
@@ -46,7 +46,7 @@ UCHAR OUI_WPA_WEP104[4] = { 0x00, 0x50, 0xF2, 0x05 };
 UCHAR OUI_WPA_8021X_AKM[4] = { 0x00, 0x50, 0xF2, 0x01 };
 UCHAR OUI_WPA_PSK_AKM[4] = { 0x00, 0x50, 0xF2, 0x02 };
 
-// WPA2 OUI
+/* WPA2 OUI */
 UCHAR OUI_WPA2_WEP40[4] = { 0x00, 0x0F, 0xAC, 0x01 };
 UCHAR OUI_WPA2_TKIP[4] = { 0x00, 0x0F, 0xAC, 0x02 };
 UCHAR OUI_WPA2_CCMP[4] = { 0x00, 0x0F, 0xAC, 0x04 };
@@ -143,7 +143,7 @@ VOID WpaEAPOLStartAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 
        pHeader = (PHEADER_802_11) Elem->Msg;
 
-       //For normaol PSK, we enqueue an EAPOL-Start command to trigger the process.
+       /*For normaol PSK, we enqueue an EAPOL-Start command to trigger the process. */
        if (Elem->MsgLen == 6)
                pEntry = MacTableLookup(pAd, Elem->Msg);
        else {
@@ -232,41 +232,41 @@ VOID WpaEAPOLKeyAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
                                 ("Key descripter does not match with WPA rule\n"));
                        break;
                }
-               // The value 1 shall be used for all EAPOL-Key frames to and from a STA when
-               // neither the group nor pairwise ciphers are CCMP for Key Descriptor 1.
+               /* The value 1 shall be used for all EAPOL-Key frames to and from a STA when */
+               /* neither the group nor pairwise ciphers are CCMP for Key Descriptor 1. */
                if ((pEntry->WepStatus == Ndis802_11Encryption2Enabled)
                    && (peerKeyInfo.KeyDescVer != DESC_TYPE_TKIP)) {
                        DBGPRINT(RT_DEBUG_ERROR,
                                 ("Key descripter version not match(TKIP) \n"));
                        break;
                }
-               // The value 2 shall be used for all EAPOL-Key frames to and from a STA when
-               // either the pairwise or the group cipher is AES-CCMP for Key Descriptor 2.
+               /* The value 2 shall be used for all EAPOL-Key frames to and from a STA when */
+               /* either the pairwise or the group cipher is AES-CCMP for Key Descriptor 2. */
                else if ((pEntry->WepStatus == Ndis802_11Encryption3Enabled)
                         && (peerKeyInfo.KeyDescVer != DESC_TYPE_AES)) {
                        DBGPRINT(RT_DEBUG_ERROR,
                                 ("Key descripter version not match(AES) \n"));
                        break;
                }
-               // Check if this STA is in class 3 state and the WPA state is started
+               /* Check if this STA is in class 3 state and the WPA state is started */
                if ((pEntry->Sst == SST_ASSOC)
                    && (pEntry->WpaState >= AS_INITPSK)) {
-                       // Check the Key Ack (bit 7) of the Key Information to determine the Authenticator
-                       // or not.
-                       // An EAPOL-Key frame that is sent by the Supplicant in response to an EAPOL-
-                       // Key frame from the Authenticator must not have the Ack bit set.
+                       /* Check the Key Ack (bit 7) of the Key Information to determine the Authenticator */
+                       /* or not. */
+                       /* An EAPOL-Key frame that is sent by the Supplicant in response to an EAPOL- */
+                       /* Key frame from the Authenticator must not have the Ack bit set. */
                        if (peerKeyInfo.KeyAck == 1) {
-                               // The frame is snet by Authenticator.
-                               // So the Supplicant side shall handle this.
+                               /* The frame is snet by Authenticator. */
+                               /* So the Supplicant side shall handle this. */
 
                                if ((peerKeyInfo.Secure == 0)
                                    && (peerKeyInfo.Request == 0)
                                    && (peerKeyInfo.Error == 0)
                                    && (peerKeyInfo.KeyType == PAIRWISEKEY)) {
-                                       // Process 1. the message 1 of 4-way HS in WPA or WPA2
-                                       //                        EAPOL-Key(0,0,1,0,P,0,0,ANonce,0,DataKD_M1)
-                                       //                 2. the message 3 of 4-way HS in WPA
-                                       //                        EAPOL-Key(0,1,1,1,P,0,KeyRSC,ANonce,MIC,DataKD_M3)
+                                       /* Process 1. the message 1 of 4-way HS in WPA or WPA2 */
+                                       /*                        EAPOL-Key(0,0,1,0,P,0,0,ANonce,0,DataKD_M1) */
+                                       /*                 2. the message 3 of 4-way HS in WPA */
+                                       /*                        EAPOL-Key(0,1,1,1,P,0,KeyRSC,ANonce,MIC,DataKD_M3) */
                                        if (peerKeyInfo.KeyMic == 0)
                                                PeerPairMsg1Action(pAd, pEntry,
                                                                   Elem);
@@ -277,10 +277,10 @@ VOID WpaEAPOLKeyAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
                                           && (peerKeyInfo.KeyMic == 1)
                                           && (peerKeyInfo.Request == 0)
                                           && (peerKeyInfo.Error == 0)) {
-                                       // Process 1. the message 3 of 4-way HS in WPA2
-                                       //                        EAPOL-Key(1,1,1,1,P,0,KeyRSC,ANonce,MIC,DataKD_M3)
-                                       //                 2. the message 1 of group KS in WPA or WPA2
-                                       //                        EAPOL-Key(1,1,1,0,G,0,Key RSC,0, MIC,GTK[N])
+                                       /* Process 1. the message 3 of 4-way HS in WPA2 */
+                                       /*                        EAPOL-Key(1,1,1,1,P,0,KeyRSC,ANonce,MIC,DataKD_M3) */
+                                       /*                 2. the message 1 of group KS in WPA or WPA2 */
+                                       /*                        EAPOL-Key(1,1,1,0,G,0,Key RSC,0, MIC,GTK[N]) */
                                        if (peerKeyInfo.KeyType == PAIRWISEKEY)
                                                PeerPairMsg3Action(pAd, pEntry,
                                                                   Elem);
@@ -289,17 +289,17 @@ VOID WpaEAPOLKeyAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
                                                                    Elem);
                                }
                        } else {
-                               // The frame is snet by Supplicant.
-                               // So the Authenticator side shall handle this.
+                               /* The frame is snet by Supplicant. */
+                               /* So the Authenticator side shall handle this. */
                                if ((peerKeyInfo.Request == 0) &&
                                    (peerKeyInfo.Error == 0) &&
                                    (peerKeyInfo.KeyMic == 1)) {
                                        if (peerKeyInfo.Secure == 0
                                            && peerKeyInfo.KeyType ==
                                            PAIRWISEKEY) {
-                                               // EAPOL-Key(0,1,0,0,P,0,0,SNonce,MIC,Data)
-                                               // Process 1. message 2 of 4-way HS in WPA or WPA2
-                                               //                 2. message 4 of 4-way HS in WPA
+                                               /* EAPOL-Key(0,1,0,0,P,0,0,SNonce,MIC,Data) */
+                                               /* Process 1. message 2 of 4-way HS in WPA or WPA2 */
+                                               /*                 2. message 4 of 4-way HS in WPA */
                                                if (CONV_ARRARY_TO_UINT16
                                                    (pEapol_packet->KeyDesc.
                                                     KeyDataLen) == 0) {
@@ -314,15 +314,15 @@ VOID WpaEAPOLKeyAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
                                        } else if (peerKeyInfo.Secure == 1
                                                   && peerKeyInfo.KeyType ==
                                                   PAIRWISEKEY) {
-                                               // EAPOL-Key(1,1,0,0,P,0,0,0,MIC,0)
-                                               // Process message 4 of 4-way HS in WPA2
+                                               /* EAPOL-Key(1,1,0,0,P,0,0,0,MIC,0) */
+                                               /* Process message 4 of 4-way HS in WPA2 */
                                                PeerPairMsg4Action(pAd, pEntry,
                                                                   Elem);
                                        } else if (peerKeyInfo.Secure == 1
                                                   && peerKeyInfo.KeyType ==
                                                   GROUPKEY) {
-                                               // EAPOL-Key(1,1,0,0,G,0,0,0,MIC,0)
-                                               // Process message 2 of Group key HS in WPA or WPA2
+                                               /* EAPOL-Key(1,1,0,0,G,0,0,0,MIC,0) */
+                                               /* Process message 2 of Group key HS in WPA or WPA2 */
                                                PeerGroupMsg2Action(pAd, pEntry,
                                                                    &Elem->
                                                                    Msg
@@ -370,7 +370,7 @@ VOID RTMPToWirelessSta(IN PRTMP_ADAPTER pAd,
                return;
 
        do {
-               // build a NDIS packet
+               /* build a NDIS packet */
                Status =
                    RTMPAllocateNdisPacket(pAd, &pPacket, pHeader802_3, HdrLen,
                                           pData, DataLen);
@@ -384,7 +384,7 @@ VOID RTMPToWirelessSta(IN PRTMP_ADAPTER pAd,
                {
                        RTMP_SET_PACKET_SOURCE(pPacket, PKTSRC_NDIS);
 
-                       RTMP_SET_PACKET_NET_DEVICE_MBSSID(pPacket, MAIN_MBSSID);        // set a default value
+                       RTMP_SET_PACKET_NET_DEVICE_MBSSID(pPacket, MAIN_MBSSID);        /* set a default value */
                        if (pEntry->apidx != 0)
                                RTMP_SET_PACKET_NET_DEVICE_MBSSID(pPacket,
                                                                  pEntry->
@@ -395,16 +395,16 @@ VOID RTMPToWirelessSta(IN PRTMP_ADAPTER pAd,
                }
 
                {
-                       // send out the packet
+                       /* send out the packet */
                        Status = STASendPacket(pAd, pPacket);
                        if (Status == NDIS_STATUS_SUCCESS) {
                                UCHAR Index;
 
-                               // Dequeue one frame from TxSwQueue0..3 queue and process it
-                               // There are three place calling dequeue for TX ring.
-                               // 1. Here, right after queueing the frame.
-                               // 2. At the end of TxRingTxDone service routine.
-                               // 3. Upon NDIS call RTMPSendPackets
+                               /* Dequeue one frame from TxSwQueue0..3 queue and process it */
+                               /* There are three place calling dequeue for TX ring. */
+                               /* 1. Here, right after queueing the frame. */
+                               /* 2. At the end of TxRingTxDone service routine. */
+                               /* 3. Upon NDIS call RTMPSendPackets */
                                if ((!RTMP_TEST_FLAG
                                     (pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
                                    &&
@@ -457,30 +457,30 @@ VOID WPAStart4WayHS(IN PRTMP_ADAPTER pAd,
                         ("[ERROR]WPAStart4WayHS : No corresponding Authenticator.\n"));
                return;
        }
-       // Check the status
+       /* Check the status */
        if ((pEntry->WpaState > AS_PTKSTART) || (pEntry->WpaState < AS_INITPMK)) {
                DBGPRINT(RT_DEBUG_ERROR,
                         ("[ERROR]WPAStart4WayHS : Not expect calling\n"));
                return;
        }
 
-       // Increment replay counter by 1
+       /* Increment replay counter by 1 */
        ADD_ONE_To_64BIT_VAR(pEntry->R_Counter);
 
-       // Randomly generate ANonce
+       /* Randomly generate ANonce */
        GenRandom(pAd, (UCHAR *) pBssid, pEntry->ANonce);
 
-       // Construct EAPoL message - Pairwise Msg 1
-       // EAPOL-Key(0,0,1,0,P,0,0,ANonce,0,DataKD_M1)
+       /* Construct EAPoL message - Pairwise Msg 1 */
+       /* EAPOL-Key(0,0,1,0,P,0,0,ANonce,0,DataKD_M1) */
        NdisZeroMemory(&EAPOLPKT, sizeof(EAPOL_PACKET));
-       ConstructEapolMsg(pEntry, group_cipher, EAPOL_PAIR_MSG_1, 0,    // Default key index
-                         pEntry->ANonce, NULL, // TxRSC
-                         NULL, // GTK
-                         NULL, // RSNIE
-                         0,    // RSNIE length
+       ConstructEapolMsg(pEntry, group_cipher, EAPOL_PAIR_MSG_1, 0,    /* Default key index */
+                         pEntry->ANonce, NULL, /* TxRSC */
+                         NULL, /* GTK */
+                         NULL, /* RSNIE */
+                         0,    /* RSNIE length */
                          &EAPOLPKT);
 
-       // Make outgoing frame
+       /* Make outgoing frame */
        MAKE_802_3_HEADER(Header802_3, pEntry->Addr, pBssid, EAPOL);
        RTMPToWirelessSta(pAd, pEntry, Header802_3,
                          LENGTH_802_3, (PUCHAR) & EAPOLPKT,
@@ -488,10 +488,10 @@ VOID WPAStart4WayHS(IN PRTMP_ADAPTER pAd,
                          (pEntry->PortSecured ==
                           WPA_802_1X_PORT_SECURED) ? FALSE : TRUE);
 
-       // Trigger Retry Timer
+       /* Trigger Retry Timer */
        RTMPModTimer(&pEntry->RetryTimer, TimeInterval);
 
-       // Update State
+       /* Update State */
        pEntry->WpaState = AS_PTKSTART;
 
        DBGPRINT(RT_DEBUG_TRACE,
@@ -548,50 +548,50 @@ VOID PeerPairMsg1Action(IN PRTMP_ADAPTER pAd,
                rsnie_len = pAd->StaCfg.RSNIE_Len;
        }
 
-       // Store the received frame
+       /* Store the received frame */
        pMsg1 = (PEAPOL_PACKET) & Elem->Msg[LENGTH_802_11 + LENGTH_802_1_H];
        MsgLen = Elem->MsgLen - LENGTH_802_11 - LENGTH_802_1_H;
 
-       // Sanity Check peer Pairwise message 1 - Replay Counter
+       /* Sanity Check peer Pairwise message 1 - Replay Counter */
        if (PeerWpaMessageSanity(pAd, pMsg1, MsgLen, EAPOL_PAIR_MSG_1, pEntry)
            == FALSE)
                return;
 
-       // Store Replay counter, it will use to verify message 3 and construct message 2
+       /* Store Replay counter, it will use to verify message 3 and construct message 2 */
        NdisMoveMemory(pEntry->R_Counter, pMsg1->KeyDesc.ReplayCounter,
                       LEN_KEY_DESC_REPLAY);
 
-       // Store ANonce
+       /* Store ANonce */
        NdisMoveMemory(pEntry->ANonce, pMsg1->KeyDesc.KeyNonce,
                       LEN_KEY_DESC_NONCE);
 
-       // Generate random SNonce
+       /* Generate random SNonce */
        GenRandom(pAd, (UCHAR *) pCurrentAddr, pEntry->SNonce);
 
        {
-               // Calculate PTK(ANonce, SNonce)
+               /* Calculate PTK(ANonce, SNonce) */
                WpaDerivePTK(pAd,
                             pmk_ptr,
                             pEntry->ANonce,
                             pEntry->Addr,
                             pEntry->SNonce, pCurrentAddr, PTK, LEN_PTK);
 
-               // Save key to PTK entry
+               /* Save key to PTK entry */
                NdisMoveMemory(pEntry->PTK, PTK, LEN_PTK);
        }
 
-       // Update WpaState
+       /* Update WpaState */
        pEntry->WpaState = AS_PTKINIT_NEGOTIATING;
 
-       // Construct EAPoL message - Pairwise Msg 2
-       //  EAPOL-Key(0,1,0,0,P,0,0,SNonce,MIC,DataKD_M2)
+       /* Construct EAPoL message - Pairwise Msg 2 */
+       /*  EAPOL-Key(0,1,0,0,P,0,0,SNonce,MIC,DataKD_M2) */
        NdisZeroMemory(&EAPOLPKT, sizeof(EAPOL_PACKET));
-       ConstructEapolMsg(pEntry, group_cipher, EAPOL_PAIR_MSG_2, 0,    // DefaultKeyIdx
-                         pEntry->SNonce, NULL, // TxRsc
-                         NULL, // GTK
+       ConstructEapolMsg(pEntry, group_cipher, EAPOL_PAIR_MSG_2, 0,    /* DefaultKeyIdx */
+                         pEntry->SNonce, NULL, /* TxRsc */
+                         NULL, /* GTK */
                          (UCHAR *) rsnie_ptr, rsnie_len, &EAPOLPKT);
 
-       // Make outgoing frame
+       /* Make outgoing frame */
        MAKE_802_3_HEADER(Header802_3, pEntry->Addr, pCurrentAddr, EAPOL);
 
        RTMPToWirelessSta(pAd, pEntry,
@@ -638,46 +638,46 @@ VOID PeerPairMsg2Action(IN PRTMP_ADAPTER pAd,
             sizeof(KEY_DESCRIPTER) - MAX_LEN_OF_RSNIE - 2))
                return;
 
-       // check Entry in valid State
+       /* check Entry in valid State */
        if (pEntry->WpaState < AS_PTKSTART)
                return;
 
-       // pointer to 802.11 header
+       /* pointer to 802.11 header */
        pHeader = (PHEADER_802_11) Elem->Msg;
 
-       // skip 802.11_header(24-byte) and LLC_header(8)
+       /* skip 802.11_header(24-byte) and LLC_header(8) */
        pMsg2 = (PEAPOL_PACKET) & Elem->Msg[LENGTH_802_11 + LENGTH_802_1_H];
        MsgLen = Elem->MsgLen - LENGTH_802_11 - LENGTH_802_1_H;
 
-       // Store SNonce
+       /* Store SNonce */
        NdisMoveMemory(pEntry->SNonce, pMsg2->KeyDesc.KeyNonce,
                       LEN_KEY_DESC_NONCE);
 
        {
-               // Derive PTK
-               WpaDerivePTK(pAd, (UCHAR *) pmk_ptr, pEntry->ANonce,    // ANONCE
-                            (UCHAR *) pBssid, pEntry->SNonce,  // SNONCE
+               /* Derive PTK */
+               WpaDerivePTK(pAd, (UCHAR *) pmk_ptr, pEntry->ANonce,    /* ANONCE */
+                            (UCHAR *) pBssid, pEntry->SNonce,  /* SNONCE */
                             pEntry->Addr, PTK, LEN_PTK);
 
                NdisMoveMemory(pEntry->PTK, PTK, LEN_PTK);
        }
 
-       // Sanity Check peer Pairwise message 2 - Replay Counter, MIC, RSNIE
+       /* Sanity Check peer Pairwise message 2 - Replay Counter, MIC, RSNIE */
        if (PeerWpaMessageSanity(pAd, pMsg2, MsgLen, EAPOL_PAIR_MSG_2, pEntry)
            == FALSE)
                return;
 
        do {
-               // delete retry timer
+               /* delete retry timer */
                RTMPCancelTimer(&pEntry->RetryTimer, &Cancelled);
 
-               // Change state
+               /* Change state */
                pEntry->WpaState = AS_PTKINIT_NEGOTIATING;
 
-               // Increment replay counter by 1
+               /* Increment replay counter by 1 */
                ADD_ONE_To_64BIT_VAR(pEntry->R_Counter);
 
-               // Construct EAPoL message - Pairwise Msg 3
+               /* Construct EAPoL message - Pairwise Msg 3 */
                NdisZeroMemory(&EAPOLPKT, sizeof(EAPOL_PACKET));
                ConstructEapolMsg(pEntry,
                                  group_cipher,
@@ -688,7 +688,7 @@ VOID PeerPairMsg2Action(IN PRTMP_ADAPTER pAd,
                                  (UCHAR *) gtk_ptr,
                                  (UCHAR *) rsnie_ptr, rsnie_len, &EAPOLPKT);
 
-               // Make outgoing frame
+               /* Make outgoing frame */
                MAKE_802_3_HEADER(Header802_3, pEntry->Addr, pBssid, EAPOL);
                RTMPToWirelessSta(pAd, pEntry, Header802_3, LENGTH_802_3,
                                  (PUCHAR) & EAPOLPKT,
@@ -699,7 +699,7 @@ VOID PeerPairMsg2Action(IN PRTMP_ADAPTER pAd,
                pEntry->ReTryCounter = PEER_MSG3_RETRY_TIMER_CTR;
                RTMPSetTimer(&pEntry->RetryTimer, PEER_MSG3_RETRY_EXEC_INTV);
 
-               // Update State
+               /* Update State */
                pEntry->WpaState = AS_PTKINIT_NEGOTIATING;
        } while (FALSE);
 
@@ -751,38 +751,38 @@ VOID PeerPairMsg3Action(IN PRTMP_ADAPTER pAd,
 
        }
 
-       // Record 802.11 header & the received EAPOL packet Msg3
+       /* Record 802.11 header & the received EAPOL packet Msg3 */
        pHeader = (PHEADER_802_11) Elem->Msg;
        pMsg3 = (PEAPOL_PACKET) & Elem->Msg[LENGTH_802_11 + LENGTH_802_1_H];
        MsgLen = Elem->MsgLen - LENGTH_802_11 - LENGTH_802_1_H;
 
-       // Sanity Check peer Pairwise message 3 - Replay Counter, MIC, RSNIE
+       /* Sanity Check peer Pairwise message 3 - Replay Counter, MIC, RSNIE */
        if (PeerWpaMessageSanity(pAd, pMsg3, MsgLen, EAPOL_PAIR_MSG_3, pEntry)
            == FALSE)
                return;
 
-       // Save Replay counter, it will use construct message 4
+       /* Save Replay counter, it will use construct message 4 */
        NdisMoveMemory(pEntry->R_Counter, pMsg3->KeyDesc.ReplayCounter,
                       LEN_KEY_DESC_REPLAY);
 
-       // Double check ANonce
+       /* Double check ANonce */
        if (!NdisEqualMemory
            (pEntry->ANonce, pMsg3->KeyDesc.KeyNonce, LEN_KEY_DESC_NONCE)) {
                return;
        }
-       // Construct EAPoL message - Pairwise Msg 4
+       /* Construct EAPoL message - Pairwise Msg 4 */
        NdisZeroMemory(&EAPOLPKT, sizeof(EAPOL_PACKET));
-       ConstructEapolMsg(pEntry, group_cipher, EAPOL_PAIR_MSG_4, 0,    // group key index not used in message 4
-                         NULL, // Nonce not used in message 4
-                         NULL, // TxRSC not used in message 4
-                         NULL, // GTK not used in message 4
-                         NULL, // RSN IE not used in message 4
+       ConstructEapolMsg(pEntry, group_cipher, EAPOL_PAIR_MSG_4, 0,    /* group key index not used in message 4 */
+                         NULL, /* Nonce not used in message 4 */
+                         NULL, /* TxRSC not used in message 4 */
+                         NULL, /* GTK not used in message 4 */
+                         NULL, /* RSN IE not used in message 4 */
                          0, &EAPOLPKT);
 
-       // Update WpaState
+       /* Update WpaState */
        pEntry->WpaState = AS_PTKINITDONE;
 
-       // Update pairwise key
+       /* Update pairwise key */
        {
                PCIPHER_KEY pSharedKey;
 
@@ -790,7 +790,7 @@ VOID PeerPairMsg3Action(IN PRTMP_ADAPTER pAd,
 
                NdisMoveMemory(pAd->StaCfg.PTK, pEntry->PTK, LEN_PTK);
 
-               // Prepare pair-wise key information into shared key table
+               /* Prepare pair-wise key information into shared key table */
                NdisZeroMemory(pSharedKey, sizeof(CIPHER_KEY));
                pSharedKey->KeyLen = LEN_TKIP_EK;
                NdisMoveMemory(pSharedKey->Key, &pAd->StaCfg.PTK[32],
@@ -801,7 +801,7 @@ VOID PeerPairMsg3Action(IN PRTMP_ADAPTER pAd,
                               &pAd->StaCfg.PTK[48 + LEN_TKIP_RXMICK],
                               LEN_TKIP_TXMICK);
 
-               // Decide its ChiperAlg
+               /* Decide its ChiperAlg */
                if (pAd->StaCfg.PairCipher == Ndis802_11Encryption2Enabled)
                        pSharedKey->CipherAlg = CIPHER_TKIP;
                else if (pAd->StaCfg.PairCipher == Ndis802_11Encryption3Enabled)
@@ -809,7 +809,7 @@ VOID PeerPairMsg3Action(IN PRTMP_ADAPTER pAd,
                else
                        pSharedKey->CipherAlg = CIPHER_NONE;
 
-               // Update these related information to MAC_TABLE_ENTRY
+               /* Update these related information to MAC_TABLE_ENTRY */
                pEntry = &pAd->MacTab.Content[BSSID_WCID];
                NdisMoveMemory(pEntry->PairwiseKey.Key, &pAd->StaCfg.PTK[32],
                               LEN_TKIP_EK);
@@ -820,7 +820,7 @@ VOID PeerPairMsg3Action(IN PRTMP_ADAPTER pAd,
                               LEN_TKIP_TXMICK);
                pEntry->PairwiseKey.CipherAlg = pSharedKey->CipherAlg;
 
-               // Update pairwise key information to ASIC Shared Key Table
+               /* Update pairwise key information to ASIC Shared Key Table */
                AsicAddSharedKeyEntry(pAd,
                                      BSS0,
                                      0,
@@ -828,21 +828,21 @@ VOID PeerPairMsg3Action(IN PRTMP_ADAPTER pAd,
                                      pSharedKey->Key,
                                      pSharedKey->TxMic, pSharedKey->RxMic);
 
-               // Update ASIC WCID attribute table and IVEIV table
+               /* Update ASIC WCID attribute table and IVEIV table */
                RTMPAddWcidAttributeEntry(pAd,
                                          BSS0,
                                          0, pSharedKey->CipherAlg, pEntry);
 
        }
 
-       // open 802.1x port control and privacy filter
+       /* open 802.1x port control and privacy filter */
        if (pEntry->AuthMode == Ndis802_11AuthModeWPA2PSK ||
            pEntry->AuthMode == Ndis802_11AuthModeWPA2) {
                pEntry->PortSecured = WPA_802_1X_PORT_SECURED;
                pEntry->PrivacyFilter = Ndis802_11PrivFilterAcceptAll;
 
                STA_PORT_SECURED(pAd);
-               // Indicate Connected for GUI
+               /* Indicate Connected for GUI */
                pAd->IndicateMediaState = NdisMediaStateConnected;
                DBGPRINT(RT_DEBUG_TRACE,
                         ("PeerPairMsg3Action: AuthMode(%s) PairwiseCipher(%s) GroupCipher(%s) \n",
@@ -852,7 +852,7 @@ VOID PeerPairMsg3Action(IN PRTMP_ADAPTER pAd,
        } else {
        }
 
-       // Init 802.3 header and send out
+       /* Init 802.3 header and send out */
        MAKE_802_3_HEADER(Header802_3, pEntry->Addr, pCurrentAddr, EAPOL);
        RTMPToWirelessSta(pAd, pEntry,
                          Header802_3, sizeof(Header802_3),
@@ -894,23 +894,23 @@ VOID PeerPairMsg4Action(IN PRTMP_ADAPTER pAd,
                if (pEntry->WpaState < AS_PTKINIT_NEGOTIATING)
                        break;
 
-               // pointer to 802.11 header
+               /* pointer to 802.11 header */
                pHeader = (PHEADER_802_11) Elem->Msg;
 
-               // skip 802.11_header(24-byte) and LLC_header(8)
+               /* skip 802.11_header(24-byte) and LLC_header(8) */
                pMsg4 =
                    (PEAPOL_PACKET) & Elem->Msg[LENGTH_802_11 + LENGTH_802_1_H];
                MsgLen = Elem->MsgLen - LENGTH_802_11 - LENGTH_802_1_H;
 
-               // Sanity Check peer Pairwise message 4 - Replay Counter, MIC
+               /* Sanity Check peer Pairwise message 4 - Replay Counter, MIC */
                if (PeerWpaMessageSanity
                    (pAd, pMsg4, MsgLen, EAPOL_PAIR_MSG_4, pEntry) == FALSE)
                        break;
 
-               // 3. uses the MLME.SETKEYS.request to configure PTK into MAC
+               /* 3. uses the MLME.SETKEYS.request to configure PTK into MAC */
                NdisZeroMemory(&pEntry->PairwiseKey, sizeof(CIPHER_KEY));
 
-               // reset IVEIV in Asic
+               /* reset IVEIV in Asic */
                AsicUpdateWCIDIVEIV(pAd, pEntry->Aid, 1, 0);
 
                pEntry->PairwiseKey.KeyLen = LEN_TKIP_EK;
@@ -923,7 +923,7 @@ VOID PeerPairMsg4Action(IN PRTMP_ADAPTER pAd,
                               &pEntry->PTK[TKIP_AP_TXMICK_OFFSET],
                               LEN_TKIP_TXMICK);
 
-               // Set pairwise key to Asic
+               /* Set pairwise key to Asic */
                {
                        pEntry->PairwiseKey.CipherAlg = CIPHER_NONE;
                        if (pEntry->WepStatus == Ndis802_11Encryption2Enabled)
@@ -932,13 +932,13 @@ VOID PeerPairMsg4Action(IN PRTMP_ADAPTER pAd,
                                 Ndis802_11Encryption3Enabled)
                                pEntry->PairwiseKey.CipherAlg = CIPHER_AES;
 
-                       // Add Pair-wise key to Asic
+                       /* Add Pair-wise key to Asic */
                        AsicAddPairwiseKeyEntry(pAd,
                                                pEntry->Addr,
                                                (UCHAR) pEntry->Aid,
                                                &pEntry->PairwiseKey);
 
-                       // update WCID attribute table and IVEIV table for this entry
+                       /* update WCID attribute table and IVEIV table for this entry */
                        RTMPAddWcidAttributeEntry(pAd,
                                                  pEntry->apidx,
                                                  0,
@@ -946,7 +946,7 @@ VOID PeerPairMsg4Action(IN PRTMP_ADAPTER pAd,
                                                  pEntry);
                }
 
-               // 4. upgrade state
+               /* 4. upgrade state */
                pEntry->PrivacyFilter = Ndis802_11PrivFilterAcceptAll;
                pEntry->WpaState = AS_PTKINITDONE;
                pEntry->PortSecured = WPA_802_1X_PORT_SECURED;
@@ -956,7 +956,7 @@ VOID PeerPairMsg4Action(IN PRTMP_ADAPTER pAd,
                        pEntry->GTKState = REKEY_ESTABLISHED;
                        RTMPCancelTimer(&pEntry->RetryTimer, &Cancelled);
 
-                       // send wireless event - for set key done WPA2
+                       /* send wireless event - for set key done WPA2 */
                        if (pAd->CommonCfg.bWirelessEvent)
                                RTMPSendWirelessEvent(pAd,
                                                      IW_SET_KEY_DONE_WPA2_EVENT_FLAG,
@@ -971,7 +971,7 @@ VOID PeerPairMsg4Action(IN PRTMP_ADAPTER pAd,
                                  GetEncryptType(pEntry->WepStatus),
                                  group_cipher, GetEncryptType(group_cipher)));
                } else {
-                       // 5. init Group 2-way handshake if necessary.
+                       /* 5. init Group 2-way handshake if necessary. */
                        WPAStart2WayGroupHS(pAd, pEntry);
 
                        pEntry->ReTryCounter = GROUP_MSG1_RETRY_TIMER_CTR;
@@ -1007,10 +1007,10 @@ VOID WPAStart2WayGroupHS(IN PRTMP_ADAPTER pAd, IN MAC_TABLE_ENTRY * pEntry)
                return;
 
        do {
-               // Increment replay counter by 1
+               /* Increment replay counter by 1 */
                ADD_ONE_To_64BIT_VAR(pEntry->R_Counter);
 
-               // Construct EAPoL message - Group Msg 1
+               /* Construct EAPoL message - Group Msg 1 */
                NdisZeroMemory(&EAPOLPKT, sizeof(EAPOL_PACKET));
                ConstructEapolMsg(pEntry,
                                  group_cipher,
@@ -1019,7 +1019,7 @@ VOID WPAStart2WayGroupHS(IN PRTMP_ADAPTER pAd, IN MAC_TABLE_ENTRY * pEntry)
                                  (UCHAR *) gnonce_ptr,
                                  TxTsc, (UCHAR *) gtk_ptr, NULL, 0, &EAPOLPKT);
 
-               // Make outgoing frame
+               /* Make outgoing frame */
                MAKE_802_3_HEADER(Header802_3, pEntry->Addr, pBssid, EAPOL);
                RTMPToWirelessSta(pAd, pEntry,
                                  Header802_3, LENGTH_802_3,
@@ -1075,36 +1075,36 @@ VOID PeerGroupMsg1Action(IN PRTMP_ADAPTER pAd,
                default_key = pAd->StaCfg.DefaultKeyId;
        }
 
-       // Process Group Message 1 frame. skip 802.11 header(24) & LLC_SNAP header(8)
+       /* Process Group Message 1 frame. skip 802.11 header(24) & LLC_SNAP header(8) */
        pGroup = (PEAPOL_PACKET) & Elem->Msg[LENGTH_802_11 + LENGTH_802_1_H];
        MsgLen = Elem->MsgLen - LENGTH_802_11 - LENGTH_802_1_H;
 
-       // Sanity Check peer group message 1 - Replay Counter, MIC, RSNIE
+       /* Sanity Check peer group message 1 - Replay Counter, MIC, RSNIE */
        if (PeerWpaMessageSanity(pAd, pGroup, MsgLen, EAPOL_GROUP_MSG_1, pEntry)
            == FALSE)
                return;
 
-       // delete retry timer
+       /* delete retry timer */
        RTMPCancelTimer(&pEntry->RetryTimer, &Cancelled);
 
-       // Save Replay counter, it will use to construct message 2
+       /* Save Replay counter, it will use to construct message 2 */
        NdisMoveMemory(pEntry->R_Counter, pGroup->KeyDesc.ReplayCounter,
                       LEN_KEY_DESC_REPLAY);
 
-       // Construct EAPoL message - Group Msg 2
+       /* Construct EAPoL message - Group Msg 2 */
        NdisZeroMemory(&EAPOLPKT, sizeof(EAPOL_PACKET));
-       ConstructEapolMsg(pEntry, group_cipher, EAPOL_GROUP_MSG_2, default_key, NULL,   // Nonce not used
-                         NULL, // TxRSC not used
-                         NULL, // GTK not used
-                         NULL, // RSN IE not used
+       ConstructEapolMsg(pEntry, group_cipher, EAPOL_GROUP_MSG_2, default_key, NULL,   /* Nonce not used */
+                         NULL, /* TxRSC not used */
+                         NULL, /* GTK not used */
+                         NULL, /* RSN IE not used */
                          0, &EAPOLPKT);
 
-       // open 802.1x port control and privacy filter
+       /* open 802.1x port control and privacy filter */
        pEntry->PortSecured = WPA_802_1X_PORT_SECURED;
        pEntry->PrivacyFilter = Ndis802_11PrivFilterAcceptAll;
 
        STA_PORT_SECURED(pAd);
-       // Indicate Connected for GUI
+       /* Indicate Connected for GUI */
        pAd->IndicateMediaState = NdisMediaStateConnected;
 
        DBGPRINT(RT_DEBUG_TRACE,
@@ -1113,7 +1113,7 @@ VOID PeerGroupMsg1Action(IN PRTMP_ADAPTER pAd,
                  GetEncryptType(pEntry->WepStatus),
                  GetEncryptType(group_cipher)));
 
-       // init header and Fill Packet and send Msg 2 to authenticator
+       /* init header and Fill Packet and send Msg 2 to authenticator */
        MAKE_802_3_HEADER(Header802_3, pEntry->Addr, pCurrentAddr, EAPOL);
        RTMPToWirelessSta(pAd, pEntry,
                          Header802_3, sizeof(Header802_3),
@@ -1159,19 +1159,19 @@ VOID PeerGroupMsg2Action(IN PRTMP_ADAPTER pAd,
                pMsg2 = (PEAPOL_PACKET) (pData + LENGTH_802_1_H);
                Len = MsgLen - LENGTH_802_1_H;
 
-               // Sanity Check peer group message 2 - Replay Counter, MIC
+               /* Sanity Check peer group message 2 - Replay Counter, MIC */
                if (PeerWpaMessageSanity
                    (pAd, pMsg2, Len, EAPOL_GROUP_MSG_2, pEntry) == FALSE)
                        break;
 
-               // 3.  upgrade state
+               /* 3.  upgrade state */
 
                RTMPCancelTimer(&pEntry->RetryTimer, &Cancelled);
                pEntry->GTKState = REKEY_ESTABLISHED;
 
                if ((pEntry->AuthMode == Ndis802_11AuthModeWPA2)
                    || (pEntry->AuthMode == Ndis802_11AuthModeWPA2PSK)) {
-                       // send wireless event - for set key done WPA2
+                       /* send wireless event - for set key done WPA2 */
                        if (pAd->CommonCfg.bWirelessEvent)
                                RTMPSendWirelessEvent(pAd,
                                                      IW_SET_KEY_DONE_WPA2_EVENT_FLAG,
@@ -1186,7 +1186,7 @@ VOID PeerGroupMsg2Action(IN PRTMP_ADAPTER pAd,
                                  GetEncryptType(pEntry->WepStatus),
                                  group_cipher, GetEncryptType(group_cipher)));
                } else {
-                       // send wireless event - for set key done WPA
+                       /* send wireless event - for set key done WPA */
                        if (pAd->CommonCfg.bWirelessEvent)
                                RTMPSendWirelessEvent(pAd,
                                                      IW_SET_KEY_DONE_WPA1_EVENT_FLAG,
@@ -1288,36 +1288,36 @@ VOID PRF(IN UCHAR * key,
        INT currentindex = 0;
        INT total_len;
 
-       // Allocate memory for input
+       /* Allocate memory for input */
        os_alloc_mem(NULL, (PUCHAR *) & input, 1024);
 
        if (input == NULL) {
                DBGPRINT(RT_DEBUG_ERROR, ("!!!PRF: no memory!!!\n"));
                return;
        }
-       // Generate concatenation input
+       /* Generate concatenation input */
        NdisMoveMemory(input, prefix, prefix_len);
 
-       // Concatenate a single octet containing 0
+       /* Concatenate a single octet containing 0 */
        input[prefix_len] = 0;
 
-       // Concatenate specific data
+       /* Concatenate specific data */
        NdisMoveMemory(&input[prefix_len + 1], data, data_len);
        total_len = prefix_len + 1 + data_len;
 
-       // Concatenate a single octet containing 0
-       // This octet shall be update later
+       /* Concatenate a single octet containing 0 */
+       /* This octet shall be update later */
        input[total_len] = 0;
        total_len++;
 
-       // Iterate to calculate the result by hmac-sha-1
-       // Then concatenate to last result
+       /* Iterate to calculate the result by hmac-sha-1 */
+       /* Then concatenate to last result */
        for (i = 0; i < (len + 19) / 20; i++) {
                HMAC_SHA1(key, key_len, input, total_len, &output[currentindex],
                          SHA1_DIGEST_SIZE);
                currentindex += 20;
 
-               // update the last octet
+               /* update the last octet */
                input[total_len - 1]++;
        }
        os_free_mem(NULL, input);
@@ -1342,14 +1342,14 @@ static void F(char *password, unsigned char *ssid, int ssidlength,
        digest[ssidlength + 1] = (unsigned char)((count >> 16) & 0xff);
        digest[ssidlength + 2] = (unsigned char)((count >> 8) & 0xff);
        digest[ssidlength + 3] = (unsigned char)(count & 0xff);
-       HMAC_SHA1((unsigned char *)password, (int)strlen(password), digest, ssidlength + 4, digest1, SHA1_DIGEST_SIZE); // for WPA update
+       HMAC_SHA1((unsigned char *)password, (int)strlen(password), digest, ssidlength + 4, digest1, SHA1_DIGEST_SIZE); /* for WPA update */
 
        /* output = U1 */
        memcpy(output, digest1, SHA1_DIGEST_SIZE);
 
        for (i = 1; i < iterations; i++) {
                /* Un = PRF(P, Un-1) */
-               HMAC_SHA1((unsigned char *)password, (int)strlen(password), digest1, SHA1_DIGEST_SIZE, digest, SHA1_DIGEST_SIZE);       // for WPA update
+               HMAC_SHA1((unsigned char *)password, (int)strlen(password), digest1, SHA1_DIGEST_SIZE, digest, SHA1_DIGEST_SIZE);       /* for WPA update */
                memcpy(digest1, digest, SHA1_DIGEST_SIZE);
 
                /* output = output xor Un */
@@ -1414,40 +1414,40 @@ VOID WpaDerivePTK(IN PRTMP_ADAPTER pAd,
                'e', 'x', 'p', 'a', 'n', 's', 'i', 'o', 'n'
        };
 
-       // initiate the concatenation input
+       /* initiate the concatenation input */
        NdisZeroMemory(temp, sizeof(temp));
        NdisZeroMemory(concatenation, 76);
 
-       // Get smaller address
+       /* Get smaller address */
        if (RTMPCompareMemory(SA, AA, 6) == 1)
                NdisMoveMemory(concatenation, AA, 6);
        else
                NdisMoveMemory(concatenation, SA, 6);
        CurrPos += 6;
 
-       // Get larger address
+       /* Get larger address */
        if (RTMPCompareMemory(SA, AA, 6) == 1)
                NdisMoveMemory(&concatenation[CurrPos], SA, 6);
        else
                NdisMoveMemory(&concatenation[CurrPos], AA, 6);
 
-       // store the larger mac address for backward compatible of
-       // ralink proprietary STA-key issue
+       /* store the larger mac address for backward compatible of */
+       /* ralink proprietary STA-key issue */
        NdisMoveMemory(temp, &concatenation[CurrPos], MAC_ADDR_LEN);
        CurrPos += 6;
 
-       // Get smaller Nonce
+       /* Get smaller Nonce */
        if (RTMPCompareMemory(ANonce, SNonce, 32) == 0)
-               NdisMoveMemory(&concatenation[CurrPos], temp, 32);      // patch for ralink proprietary STA-key issue
+               NdisMoveMemory(&concatenation[CurrPos], temp, 32);      /* patch for ralink proprietary STA-key issue */
        else if (RTMPCompareMemory(ANonce, SNonce, 32) == 1)
                NdisMoveMemory(&concatenation[CurrPos], SNonce, 32);
        else
                NdisMoveMemory(&concatenation[CurrPos], ANonce, 32);
        CurrPos += 32;
 
-       // Get larger Nonce
+       /* Get larger Nonce */
        if (RTMPCompareMemory(ANonce, SNonce, 32) == 0)
-               NdisMoveMemory(&concatenation[CurrPos], temp, 32);      // patch for ralink proprietary STA-key issue
+               NdisMoveMemory(&concatenation[CurrPos], temp, 32);      /* patch for ralink proprietary STA-key issue */
        else if (RTMPCompareMemory(ANonce, SNonce, 32) == 1)
                NdisMoveMemory(&concatenation[CurrPos], ANonce, 32);
        else
@@ -1456,7 +1456,7 @@ VOID WpaDerivePTK(IN PRTMP_ADAPTER pAd,
 
        hex_dump("concatenation=", concatenation, 76);
 
-       // Use PRF to generate PTK
+       /* Use PRF to generate PTK */
        PRF(PMK, LEN_MASTER_KEY, Prefix, 22, concatenation, 76, output, len);
 
 }
@@ -1487,30 +1487,30 @@ VOID GenRandom(IN PRTMP_ADAPTER pAd, IN UCHAR * macAddr, OUT UCHAR * random)
        UCHAR prefix[] =
            { 'I', 'n', 'i', 't', ' ', 'C', 'o', 'u', 'n', 't', 'e', 'r' };
 
-       // Zero the related information
+       /* Zero the related information */
        NdisZeroMemory(result, 80);
        NdisZeroMemory(local, 80);
        NdisZeroMemory(KeyCounter, 32);
 
        for (i = 0; i < 32; i++) {
-               // copy the local MAC address
+               /* copy the local MAC address */
                COPY_MAC_ADDR(local, macAddr);
                curr = MAC_ADDR_LEN;
 
-               // concatenate the current time
+               /* concatenate the current time */
                NdisGetSystemUpTime(&CurrentTime);
                NdisMoveMemory(&local[curr], &CurrentTime, sizeof(CurrentTime));
                curr += sizeof(CurrentTime);
 
-               // concatenate the last result
+               /* concatenate the last result */
                NdisMoveMemory(&local[curr], result, 32);
                curr += 32;
 
-               // concatenate a variable
+               /* concatenate a variable */
                NdisMoveMemory(&local[curr], &i, 2);
                curr += 2;
 
-               // calculate the result
+               /* calculate the result */
                PRF(KeyCounter, 32, prefix, 12, local, curr, result, 32);
        }
 
@@ -1548,15 +1548,15 @@ static VOID RTMPMakeRsnIeCipher(IN PRTMP_ADAPTER pAd,
 
        *rsn_len = 0;
 
-       // decide WPA2 or WPA1
+       /* decide WPA2 or WPA1 */
        if (ElementID == Wpa2Ie) {
                RSNIE2 *pRsnie_cipher = (RSNIE2 *) pRsnIe;
 
-               // Assign the verson as 1
+               /* Assign the verson as 1 */
                pRsnie_cipher->version = 1;
 
                switch (WepStatus) {
-                       // TKIP mode
+                       /* TKIP mode */
                case Ndis802_11Encryption2Enabled:
                        NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA2_TKIP, 4);
                        pRsnie_cipher->ucount = 1;
@@ -1565,7 +1565,7 @@ static VOID RTMPMakeRsnIeCipher(IN PRTMP_ADAPTER pAd,
                        *rsn_len = sizeof(RSNIE2);
                        break;
 
-                       // AES mode
+                       /* AES mode */
                case Ndis802_11Encryption3Enabled:
                        if (bMixCipher)
                                NdisMoveMemory(pRsnie_cipher->mcast,
@@ -1579,16 +1579,16 @@ static VOID RTMPMakeRsnIeCipher(IN PRTMP_ADAPTER pAd,
                        *rsn_len = sizeof(RSNIE2);
                        break;
 
-                       // TKIP-AES mix mode
+                       /* TKIP-AES mix mode */
                case Ndis802_11Encryption4Enabled:
                        NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA2_TKIP, 4);
 
                        PairwiseCnt = 1;
-                       // Insert WPA2 TKIP as the first pairwise cipher
+                       /* Insert WPA2 TKIP as the first pairwise cipher */
                        if (MIX_CIPHER_WPA2_TKIP_ON(FlexibleCipher)) {
                                NdisMoveMemory(pRsnie_cipher->ucast[0].oui,
                                               OUI_WPA2_TKIP, 4);
-                               // Insert WPA2 AES as the secondary pairwise cipher
+                               /* Insert WPA2 AES as the secondary pairwise cipher */
                                if (MIX_CIPHER_WPA2_AES_ON(FlexibleCipher)) {
                                        NdisMoveMemory(pRsnie_cipher->ucast[0].
                                                       oui + 4, OUI_WPA2_CCMP,
@@ -1596,7 +1596,7 @@ static VOID RTMPMakeRsnIeCipher(IN PRTMP_ADAPTER pAd,
                                        PairwiseCnt = 2;
                                }
                        } else {
-                               // Insert WPA2 AES as the first pairwise cipher
+                               /* Insert WPA2 AES as the first pairwise cipher */
                                NdisMoveMemory(pRsnie_cipher->ucast[0].oui,
                                               OUI_WPA2_CCMP, 4);
                        }
@@ -1621,18 +1621,18 @@ static VOID RTMPMakeRsnIeCipher(IN PRTMP_ADAPTER pAd,
                                break;
                        }
                }
-               // swap for big-endian platform
+               /* swap for big-endian platform */
                pRsnie_cipher->version = cpu2le16(pRsnie_cipher->version);
                pRsnie_cipher->ucount = cpu2le16(pRsnie_cipher->ucount);
        } else {
                RSNIE *pRsnie_cipher = (RSNIE *) pRsnIe;
 
-               // Assign OUI and version
+               /* Assign OUI and version */
                NdisMoveMemory(pRsnie_cipher->oui, OUI_WPA_VERSION, 4);
                pRsnie_cipher->version = 1;
 
                switch (WepStatus) {
-                       // TKIP mode
+                       /* TKIP mode */
                case Ndis802_11Encryption2Enabled:
                        NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA_TKIP, 4);
                        pRsnie_cipher->ucount = 1;
@@ -1641,7 +1641,7 @@ static VOID RTMPMakeRsnIeCipher(IN PRTMP_ADAPTER pAd,
                        *rsn_len = sizeof(RSNIE);
                        break;
 
-                       // AES mode
+                       /* AES mode */
                case Ndis802_11Encryption3Enabled:
                        if (bMixCipher)
                                NdisMoveMemory(pRsnie_cipher->mcast,
@@ -1655,16 +1655,16 @@ static VOID RTMPMakeRsnIeCipher(IN PRTMP_ADAPTER pAd,
                        *rsn_len = sizeof(RSNIE);
                        break;
 
-                       // TKIP-AES mix mode
+                       /* TKIP-AES mix mode */
                case Ndis802_11Encryption4Enabled:
                        NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA_TKIP, 4);
 
                        PairwiseCnt = 1;
-                       // Insert WPA TKIP as the first pairwise cipher
+                       /* Insert WPA TKIP as the first pairwise cipher */
                        if (MIX_CIPHER_WPA_TKIP_ON(FlexibleCipher)) {
                                NdisMoveMemory(pRsnie_cipher->ucast[0].oui,
                                               OUI_WPA_TKIP, 4);
-                               // Insert WPA AES as the secondary pairwise cipher
+                               /* Insert WPA AES as the secondary pairwise cipher */
                                if (MIX_CIPHER_WPA_AES_ON(FlexibleCipher)) {
                                        NdisMoveMemory(pRsnie_cipher->ucast[0].
                                                       oui + 4, OUI_WPA_CCMP,
@@ -1672,7 +1672,7 @@ static VOID RTMPMakeRsnIeCipher(IN PRTMP_ADAPTER pAd,
                                        PairwiseCnt = 2;
                                }
                        } else {
-                               // Insert WPA AES as the first pairwise cipher
+                               /* Insert WPA AES as the first pairwise cipher */
                                NdisMoveMemory(pRsnie_cipher->ucast[0].oui,
                                               OUI_WPA_CCMP, 4);
                        }
@@ -1697,7 +1697,7 @@ static VOID RTMPMakeRsnIeCipher(IN PRTMP_ADAPTER pAd,
                                break;
                        }
                }
-               // swap for big-endian platform
+               /* swap for big-endian platform */
                pRsnie_cipher->version = cpu2le16(pRsnie_cipher->version);
                pRsnie_cipher->ucount = cpu2le16(pRsnie_cipher->ucount);
        }
@@ -1729,11 +1729,11 @@ static VOID RTMPMakeRsnIeAKM(IN PRTMP_ADAPTER pAd,
                             OUT PUCHAR pRsnIe, OUT UCHAR * rsn_len)
 {
        RSNIE_AUTH *pRsnie_auth;
-       UCHAR AkmCnt = 1;       // default as 1
+       UCHAR AkmCnt = 1;       /* default as 1 */
 
        pRsnie_auth = (RSNIE_AUTH *) (pRsnIe + (*rsn_len));
 
-       // decide WPA2 or WPA1
+       /* decide WPA2 or WPA1 */
        if (ElementID == Wpa2Ie) {
 
                switch (AuthMode) {
@@ -1780,7 +1780,7 @@ static VOID RTMPMakeRsnIeAKM(IN PRTMP_ADAPTER pAd,
        pRsnie_auth->acount = AkmCnt;
        pRsnie_auth->acount = cpu2le16(pRsnie_auth->acount);
 
-       // update current RSNIE length
+       /* update current RSNIE length */
        (*rsn_len) += (sizeof(RSNIE_AUTH) + (4 * (AkmCnt - 1)));
 
 }
@@ -1810,7 +1810,7 @@ static VOID RTMPMakeRsnIeCap(IN PRTMP_ADAPTER pAd,
 {
        RSN_CAPABILITIES *pRSN_Cap;
 
-       // it could be ignored in WPA1 mode
+       /* it could be ignored in WPA1 mode */
        if (ElementID == WpaIe)
                return;
 
@@ -1818,7 +1818,7 @@ static VOID RTMPMakeRsnIeCap(IN PRTMP_ADAPTER pAd,
 
        pRSN_Cap->word = cpu2le16(pRSN_Cap->word);
 
-       (*rsn_len) += sizeof(RSN_CAPABILITIES); // update current RSNIE length
+       (*rsn_len) += sizeof(RSN_CAPABILITIES); /* update current RSNIE length */
 
 }
 
@@ -1843,13 +1843,13 @@ static VOID RTMPMakeRsnIeCap(IN PRTMP_ADAPTER pAd,
 VOID RTMPMakeRSNIE(IN PRTMP_ADAPTER pAd,
                   IN UINT AuthMode, IN UINT WepStatus, IN UCHAR apidx)
 {
-       PUCHAR pRsnIe = NULL;   // primary RSNIE
-       UCHAR *rsnielen_cur_p = 0;      // the length of the primary RSNIE
-       UCHAR *rsnielen_ex_cur_p = 0;   // the length of the secondary RSNIE
+       PUCHAR pRsnIe = NULL;   /* primary RSNIE */
+       UCHAR *rsnielen_cur_p = 0;      /* the length of the primary RSNIE */
+       UCHAR *rsnielen_ex_cur_p = 0;   /* the length of the secondary RSNIE */
        UCHAR PrimaryRsnie;
-       BOOLEAN bMixCipher = FALSE;     // indicate the pairwise and group cipher are different
+       BOOLEAN bMixCipher = FALSE;     /* indicate the pairwise and group cipher are different */
        UCHAR p_offset;
-       WPA_MIX_PAIR_CIPHER FlexibleCipher = WPA_TKIPAES_WPA2_TKIPAES;  // it provide the more flexible cipher combination in WPA-WPA2 and TKIPAES mode
+       WPA_MIX_PAIR_CIPHER FlexibleCipher = WPA_TKIPAES_WPA2_TKIPAES;  /* it provide the more flexible cipher combination in WPA-WPA2 and TKIPAES mode */
 
        rsnielen_cur_p = NULL;
        rsnielen_ex_cur_p = NULL;
@@ -1861,8 +1861,8 @@ VOID RTMPMakeRSNIE(IN PRTMP_ADAPTER pAd,
                                if (AuthMode < Ndis802_11AuthModeWPA)
                                        return;
                        } else {
-                               // Support WPAPSK or WPA2PSK in STA-Infra mode
-                               // Support WPANone in STA-Adhoc mode
+                               /* Support WPAPSK or WPA2PSK in STA-Infra mode */
+                               /* Support WPANone in STA-Adhoc mode */
                                if ((AuthMode != Ndis802_11AuthModeWPAPSK) &&
                                    (AuthMode != Ndis802_11AuthModeWPA2PSK) &&
                                    (AuthMode != Ndis802_11AuthModeWPANone)
@@ -1872,11 +1872,11 @@ VOID RTMPMakeRSNIE(IN PRTMP_ADAPTER pAd,
 
                        DBGPRINT(RT_DEBUG_TRACE, ("==> RTMPMakeRSNIE(STA)\n"));
 
-                       // Zero RSNIE context
+                       /* Zero RSNIE context */
                        pAd->StaCfg.RSNIE_Len = 0;
                        NdisZeroMemory(pAd->StaCfg.RSN_IE, MAX_LEN_OF_RSNIE);
 
-                       // Pointer to RSNIE
+                       /* Pointer to RSNIE */
                        rsnielen_cur_p = &pAd->StaCfg.RSNIE_Len;
                        pRsnIe = pAd->StaCfg.RSN_IE;
 
@@ -1884,7 +1884,7 @@ VOID RTMPMakeRSNIE(IN PRTMP_ADAPTER pAd,
                }
        }
 
-       // indicate primary RSNIE as WPA or WPA2
+       /* indicate primary RSNIE as WPA or WPA2 */
        if ((AuthMode == Ndis802_11AuthModeWPA) ||
            (AuthMode == Ndis802_11AuthModeWPAPSK) ||
            (AuthMode == Ndis802_11AuthModeWPANone) ||
@@ -1895,20 +1895,20 @@ VOID RTMPMakeRSNIE(IN PRTMP_ADAPTER pAd,
                PrimaryRsnie = Wpa2Ie;
 
        {
-               // Build the primary RSNIE
-               // 1. insert cipher suite
+               /* Build the primary RSNIE */
+               /* 1. insert cipher suite */
                RTMPMakeRsnIeCipher(pAd, PrimaryRsnie, WepStatus, bMixCipher,
                                    FlexibleCipher, pRsnIe, &p_offset);
 
-               // 2. insert AKM
+               /* 2. insert AKM */
                RTMPMakeRsnIeAKM(pAd, PrimaryRsnie, AuthMode, apidx, pRsnIe,
                                 &p_offset);
 
-               // 3. insert capability
+               /* 3. insert capability */
                RTMPMakeRsnIeCap(pAd, PrimaryRsnie, apidx, pRsnIe, &p_offset);
        }
 
-       // 4. update the RSNIE length
+       /* 4. update the RSNIE length */
        *rsnielen_cur_p = p_offset;
 
        hex_dump("The primary RSNIE", pRsnIe, (*rsnielen_cur_p));
@@ -1943,13 +1943,13 @@ BOOLEAN RTMPCheckWPAframe(IN PRTMP_ADAPTER pAd,
        if (DataByteCount < (LENGTH_802_1_H + LENGTH_EAPOL_H))
                return FALSE;
 
-       // Skip LLC header
+       /* Skip LLC header */
        if (NdisEqualMemory(SNAP_802_1H, pData, 6) ||
-           // Cisco 1200 AP may send packet with SNAP_BRIDGE_TUNNEL
+           /* Cisco 1200 AP may send packet with SNAP_BRIDGE_TUNNEL */
            NdisEqualMemory(SNAP_BRIDGE_TUNNEL, pData, 6)) {
                pData += 6;
        }
-       // Skip 2-bytes EAPoL type
+       /* Skip 2-bytes EAPoL type */
        if (NdisEqualMemory(EAPOL, pData, 2)) {
                pData += 2;
        } else
@@ -2060,7 +2060,7 @@ BOOLEAN RTMPCheckRSNIE(IN PRTMP_ADAPTER pAd,
 
        while (len > sizeof(RSNIE2)) {
                pEid = (PEID_STRUCT) pVIE;
-               // WPA RSN IE
+               /* WPA RSN IE */
                if ((pEid->Eid == IE_WPA)
                    && (NdisEqualMemory(pEid->Octet, WPA_OUI, 4))) {
                        if ((pEntry->AuthMode == Ndis802_11AuthModeWPA
@@ -2074,7 +2074,7 @@ BOOLEAN RTMPCheckRSNIE(IN PRTMP_ADAPTER pAd,
 
                        *Offset += (pEid->Len + 2);
                }
-               // WPA2 RSN IE
+               /* WPA2 RSN IE */
                else if ((pEid->Eid == IE_RSN)
                         && (NdisEqualMemory(pEid->Octet + 2, RSN_OUI, 3))) {
                        if ((pEntry->AuthMode == Ndis802_11AuthModeWPA2
@@ -2132,12 +2132,12 @@ BOOLEAN RTMPParseEapolKeyData(IN PRTMP_ADAPTER pAd,
        UCHAR DefaultIdx = 0;
        UCHAR skip_offset;
 
-       // Verify The RSN IE contained in pairewise_msg_2 && pairewise_msg_3 and skip it
+       /* Verify The RSN IE contained in pairewise_msg_2 && pairewise_msg_3 and skip it */
        if (MsgType == EAPOL_PAIR_MSG_2 || MsgType == EAPOL_PAIR_MSG_3) {
-               // Check RSN IE whether it is WPA2/WPA2PSK
+               /* Check RSN IE whether it is WPA2/WPA2PSK */
                if (!RTMPCheckRSNIE
                    (pAd, pKeyData, KeyDataLen, pEntry, &skip_offset)) {
-                       // send wireless event - for RSN IE different
+                       /* send wireless event - for RSN IE different */
                        if (pAd->CommonCfg.bWirelessEvent)
                                RTMPSendWirelessEvent(pAd,
                                                      IW_RSNIE_DIFF_EVENT_FLAG,
@@ -2156,7 +2156,7 @@ BOOLEAN RTMPParseEapolKeyData(IN PRTMP_ADAPTER pAd,
                        if (bWPA2 && MsgType == EAPOL_PAIR_MSG_3) {
                                WpaShowAllsuite(pMyKeyData, skip_offset);
 
-                               // skip RSN IE
+                               /* skip RSN IE */
                                pMyKeyData += skip_offset;
                                KeyDataLength -= skip_offset;
                                DBGPRINT(RT_DEBUG_TRACE,
@@ -2170,24 +2170,24 @@ BOOLEAN RTMPParseEapolKeyData(IN PRTMP_ADAPTER pAd,
        DBGPRINT(RT_DEBUG_TRACE,
                 ("RTMPParseEapolKeyData ==> KeyDataLength %d without RSN_IE \n",
                  KeyDataLength));
-       //hex_dump("remain data", pMyKeyData, KeyDataLength);
+       /*hex_dump("remain data", pMyKeyData, KeyDataLength); */
 
-       // Parse EKD format in pairwise_msg_3_WPA2 && group_msg_1_WPA2
+       /* Parse EKD format in pairwise_msg_3_WPA2 && group_msg_1_WPA2 */
        if (bWPA2
            && (MsgType == EAPOL_PAIR_MSG_3 || MsgType == EAPOL_GROUP_MSG_1)) {
-               if (KeyDataLength >= 8) // KDE format exclude GTK length
+               if (KeyDataLength >= 8) /* KDE format exclude GTK length */
                {
                        pKDE = (PKDE_ENCAP) pMyKeyData;
 
                        DefaultIdx = pKDE->GTKEncap.Kid;
 
-                       // Sanity check - KED length
+                       /* Sanity check - KED length */
                        if (KeyDataLength < (pKDE->Len + 2)) {
                                DBGPRINT(RT_DEBUG_ERROR,
                                         ("ERROR: The len from KDE is too short \n"));
                                return FALSE;
                        }
-                       // Get GTK length - refer to IEEE 802.11i-2004 p.82
+                       /* Get GTK length - refer to IEEE 802.11i-2004 p.82 */
                        GTKLEN = pKDE->Len - 6;
                        if (GTKLEN < LEN_AES_KEY) {
                                DBGPRINT(RT_DEBUG_ERROR,
@@ -2205,7 +2205,7 @@ BOOLEAN RTMPParseEapolKeyData(IN PRTMP_ADAPTER pAd,
                DBGPRINT(RT_DEBUG_TRACE,
                         ("GTK in KDE format ,DefaultKeyID=%d, KeyLen=%d \n",
                          DefaultIdx, GTKLEN));
-               // skip it
+               /* skip it */
                pMyKeyData += 8;
                KeyDataLength -= 8;
 
@@ -2214,7 +2214,7 @@ BOOLEAN RTMPParseEapolKeyData(IN PRTMP_ADAPTER pAd,
                DBGPRINT(RT_DEBUG_TRACE,
                         ("GTK DefaultKeyID=%d \n", DefaultIdx));
        }
-       // Sanity check - shared key index must be 1 ~ 3
+       /* Sanity check - shared key index must be 1 ~ 3 */
        if (DefaultIdx < 1 || DefaultIdx > 3) {
                DBGPRINT(RT_DEBUG_ERROR,
                         ("ERROR: GTK Key index(%d) is invalid in %s %s \n",
@@ -2226,13 +2226,13 @@ BOOLEAN RTMPParseEapolKeyData(IN PRTMP_ADAPTER pAd,
        {
                PCIPHER_KEY pSharedKey;
 
-               // set key material, TxMic and RxMic
+               /* set key material, TxMic and RxMic */
                NdisMoveMemory(pAd->StaCfg.GTK, pMyKeyData, 32);
                pAd->StaCfg.DefaultKeyId = DefaultIdx;
 
                pSharedKey = &pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId];
 
-               // Prepare pair-wise key information into shared key table
+               /* Prepare pair-wise key information into shared key table */
                NdisZeroMemory(pSharedKey, sizeof(CIPHER_KEY));
                pSharedKey->KeyLen = LEN_TKIP_EK;
                NdisMoveMemory(pSharedKey->Key, pAd->StaCfg.GTK, LEN_TKIP_EK);
@@ -2241,7 +2241,7 @@ BOOLEAN RTMPParseEapolKeyData(IN PRTMP_ADAPTER pAd,
                NdisMoveMemory(pSharedKey->TxMic, &pAd->StaCfg.GTK[24],
                               LEN_TKIP_TXMICK);
 
-               // Update Shared Key CipherAlg
+               /* Update Shared Key CipherAlg */
                pSharedKey->CipherAlg = CIPHER_NONE;
                if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption2Enabled)
                        pSharedKey->CipherAlg = CIPHER_TKIP;
@@ -2254,7 +2254,7 @@ BOOLEAN RTMPParseEapolKeyData(IN PRTMP_ADAPTER pAd,
                         Ndis802_11GroupWEP104Enabled)
                        pSharedKey->CipherAlg = CIPHER_WEP128;
 
-               // Update group key information to ASIC Shared Key Table
+               /* Update group key information to ASIC Shared Key Table */
                AsicAddSharedKeyEntry(pAd,
                                      BSS0,
                                      pAd->StaCfg.DefaultKeyId,
@@ -2262,7 +2262,7 @@ BOOLEAN RTMPParseEapolKeyData(IN PRTMP_ADAPTER pAd,
                                      pSharedKey->Key,
                                      pSharedKey->TxMic, pSharedKey->RxMic);
 
-               // Update ASIC WCID attribute table and IVEIV table
+               /* Update ASIC WCID attribute table and IVEIV table */
                RTMPAddWcidAttributeEntry(pAd,
                                          BSS0,
                                          pAd->StaCfg.DefaultKeyId,
@@ -2333,28 +2333,28 @@ VOID ConstructEapolMsg(IN PMAC_TABLE_ENTRY pEntry,
        BOOLEAN bWPA2 = FALSE;
        UCHAR KeyDescVer;
 
-       // Choose WPA2 or not
+       /* Choose WPA2 or not */
        if ((pEntry->AuthMode == Ndis802_11AuthModeWPA2) ||
            (pEntry->AuthMode == Ndis802_11AuthModeWPA2PSK))
                bWPA2 = TRUE;
 
-       // Init Packet and Fill header
+       /* Init Packet and Fill header */
        pMsg->ProVer = EAPOL_VER;
        pMsg->ProType = EAPOLKey;
 
-       // Default 95 bytes, the EAPoL-Key descriptor exclude Key-data field
+       /* Default 95 bytes, the EAPoL-Key descriptor exclude Key-data field */
        SET_UINT16_TO_ARRARY(pMsg->Body_Len, LEN_EAPOL_KEY_MSG);
 
-       // Fill in EAPoL descriptor
+       /* Fill in EAPoL descriptor */
        if (bWPA2)
                pMsg->KeyDesc.Type = WPA2_KEY_DESC;
        else
                pMsg->KeyDesc.Type = WPA1_KEY_DESC;
 
-       // Key Descriptor Version (bits 0-2) specifies the key descriptor version type
+       /* Key Descriptor Version (bits 0-2) specifies the key descriptor version type */
        {
-               // Fill in Key information, refer to IEEE Std 802.11i-2004 page 78
-               // When either the pairwise or the group cipher is AES, the DESC_TYPE_AES(2) shall be used.
+               /* Fill in Key information, refer to IEEE Std 802.11i-2004 page 78 */
+               /* When either the pairwise or the group cipher is AES, the DESC_TYPE_AES(2) shall be used. */
                KeyDescVer =
                    (((pEntry->WepStatus == Ndis802_11Encryption3Enabled)
                      || (GroupKeyWepStatus ==
@@ -2364,13 +2364,13 @@ VOID ConstructEapolMsg(IN PMAC_TABLE_ENTRY pEntry,
 
        pMsg->KeyDesc.KeyInfo.KeyDescVer = KeyDescVer;
 
-       // Specify Key Type as Group(0) or Pairwise(1)
+       /* Specify Key Type as Group(0) or Pairwise(1) */
        if (MsgType >= EAPOL_GROUP_MSG_1)
                pMsg->KeyDesc.KeyInfo.KeyType = GROUPKEY;
        else
                pMsg->KeyDesc.KeyInfo.KeyType = PAIRWISEKEY;
 
-       // Specify Key Index, only group_msg1_WPA1
+       /* Specify Key Index, only group_msg1_WPA1 */
        if (!bWPA2 && (MsgType >= EAPOL_GROUP_MSG_1))
                pMsg->KeyDesc.KeyInfo.KeyIndex = DefaultKeyIdx;
 
@@ -2393,20 +2393,20 @@ VOID ConstructEapolMsg(IN PMAC_TABLE_ENTRY pEntry,
                      (MsgType == EAPOL_GROUP_MSG_1))) {
                pMsg->KeyDesc.KeyInfo.EKD_DL = 1;
        }
-       // key Information element has done.
+       /* key Information element has done. */
        *(USHORT *) (&pMsg->KeyDesc.KeyInfo) =
            cpu2le16(*(USHORT *) (&pMsg->KeyDesc.KeyInfo));
 
-       // Fill in Key Length
+       /* Fill in Key Length */
        {
                if (MsgType >= EAPOL_GROUP_MSG_1) {
-                       // the length of group key cipher
+                       /* the length of group key cipher */
                        pMsg->KeyDesc.KeyLength[1] =
                            ((GroupKeyWepStatus ==
                              Ndis802_11Encryption2Enabled) ? TKIP_GTK_LENGTH :
                             LEN_AES_KEY);
                } else {
-                       // the length of pairwise key cipher
+                       /* the length of pairwise key cipher */
                        pMsg->KeyDesc.KeyLength[1] =
                            ((pEntry->WepStatus ==
                              Ndis802_11Encryption2Enabled) ? LEN_TKIP_KEY :
@@ -2414,33 +2414,33 @@ VOID ConstructEapolMsg(IN PMAC_TABLE_ENTRY pEntry,
                }
        }
 
-       // Fill in replay counter
+       /* Fill in replay counter */
        NdisMoveMemory(pMsg->KeyDesc.ReplayCounter, pEntry->R_Counter,
                       LEN_KEY_DESC_REPLAY);
 
-       // Fill Key Nonce field
-       // ANonce : pairwise_msg1 & pairwise_msg3
-       // SNonce : pairwise_msg2
-       // GNonce : group_msg1_wpa1
+       /* Fill Key Nonce field */
+       /* ANonce : pairwise_msg1 & pairwise_msg3 */
+       /* SNonce : pairwise_msg2 */
+       /* GNonce : group_msg1_wpa1 */
        if ((MsgType <= EAPOL_PAIR_MSG_3)
            || ((!bWPA2 && (MsgType == EAPOL_GROUP_MSG_1))))
                NdisMoveMemory(pMsg->KeyDesc.KeyNonce, KeyNonce,
                               LEN_KEY_DESC_NONCE);
 
-       // Fill key IV - WPA2 as 0, WPA1 as random
+       /* Fill key IV - WPA2 as 0, WPA1 as random */
        if (!bWPA2 && (MsgType == EAPOL_GROUP_MSG_1)) {
-               // Suggest IV be random number plus some number,
+               /* Suggest IV be random number plus some number, */
                NdisMoveMemory(pMsg->KeyDesc.KeyIv, &KeyNonce[16],
                               LEN_KEY_DESC_IV);
                pMsg->KeyDesc.KeyIv[15] += 2;
        }
-       // Fill Key RSC field
-       // It contains the RSC for the GTK being installed.
+       /* Fill Key RSC field */
+       /* It contains the RSC for the GTK being installed. */
        if ((MsgType == EAPOL_PAIR_MSG_3 && bWPA2)
            || (MsgType == EAPOL_GROUP_MSG_1)) {
                NdisMoveMemory(pMsg->KeyDesc.KeyRsc, TxRSC, 6);
        }
-       // Clear Key MIC field for MIC calculation later
+       /* Clear Key MIC field for MIC calculation later */
        NdisZeroMemory(pMsg->KeyDesc.KeyMic, LEN_KEY_DESC_MIC);
 
        ConstructEapolKeyData(pEntry,
@@ -2449,7 +2449,7 @@ VOID ConstructEapolMsg(IN PMAC_TABLE_ENTRY pEntry,
                              MsgType,
                              DefaultKeyIdx, GTK, RSNIE, RSNIE_Len, pMsg);
 
-       // Calculate MIC and fill in KeyMic Field except Pairwise Msg 1.
+       /* Calculate MIC and fill in KeyMic Field except Pairwise Msg 1. */
        if (MsgType != EAPOL_PAIR_MSG_1) {
                CalculateMIC(KeyDescVer, pEntry->PTK, pMsg);
        }
@@ -2499,7 +2499,7 @@ VOID ConstructEapolKeyData(IN PMAC_TABLE_ENTRY pEntry,
        PRTMP_ADAPTER pAd = pEntry->pAd;
        BOOLEAN GTK_Included = FALSE;
 
-       // Choose WPA2 or not
+       /* Choose WPA2 or not */
        if ((pEntry->AuthMode == Ndis802_11AuthModeWPA2) ||
            (pEntry->AuthMode == Ndis802_11AuthModeWPA2PSK))
                bWPA2Capable = TRUE;
@@ -2508,7 +2508,7 @@ VOID ConstructEapolKeyData(IN PMAC_TABLE_ENTRY pEntry,
            MsgType == EAPOL_PAIR_MSG_4 || MsgType == EAPOL_GROUP_MSG_2)
                return;
 
-       // allocate memory pool
+       /* allocate memory pool */
        os_alloc_mem(NULL, (PUCHAR *) & mpool, 1500);
 
        if (mpool == NULL)
@@ -2523,7 +2523,7 @@ VOID ConstructEapolKeyData(IN PMAC_TABLE_ENTRY pEntry,
        SET_UINT16_TO_ARRARY(pMsg->KeyDesc.KeyDataLen, 0);
        data_offset = 0;
 
-       // Encapsulate RSNIE in pairwise_msg2 & pairwise_msg3
+       /* Encapsulate RSNIE in pairwise_msg2 & pairwise_msg3 */
        if (RSNIE_LEN
            && ((MsgType == EAPOL_PAIR_MSG_2)
                || (MsgType == EAPOL_PAIR_MSG_3))) {
@@ -2535,17 +2535,17 @@ VOID ConstructEapolKeyData(IN PMAC_TABLE_ENTRY pEntry,
                                RSNIE, RSNIE_LEN, pmkid_ptr, pmkid_len);
        }
 
-       // Encapsulate KDE format in pairwise_msg3_WPA2 & group_msg1_WPA2
+       /* Encapsulate KDE format in pairwise_msg3_WPA2 & group_msg1_WPA2 */
        if (bWPA2Capable
            && ((MsgType == EAPOL_PAIR_MSG_3)
                || (MsgType == EAPOL_GROUP_MSG_1))) {
-               // Key Data Encapsulation (KDE) format - 802.11i-2004  Figure-43w and Table-20h
+               /* Key Data Encapsulation (KDE) format - 802.11i-2004  Figure-43w and Table-20h */
                Key_Data[data_offset + 0] = 0xDD;
 
                if (GroupKeyWepStatus == Ndis802_11Encryption3Enabled) {
-                       Key_Data[data_offset + 1] = 0x16;       // 4+2+16(OUI+DataType+DataField)
+                       Key_Data[data_offset + 1] = 0x16;       /* 4+2+16(OUI+DataType+DataField) */
                } else {
-                       Key_Data[data_offset + 1] = 0x26;       // 4+2+32(OUI+DataType+DataField)
+                       Key_Data[data_offset + 1] = 0x26;       /* 4+2+32(OUI+DataType+DataField) */
                }
 
                Key_Data[data_offset + 2] = 0x00;
@@ -2553,18 +2553,18 @@ VOID ConstructEapolKeyData(IN PMAC_TABLE_ENTRY pEntry,
                Key_Data[data_offset + 4] = 0xAC;
                Key_Data[data_offset + 5] = 0x01;
 
-               // GTK KDE format - 802.11i-2004  Figure-43x
+               /* GTK KDE format - 802.11i-2004  Figure-43x */
                Key_Data[data_offset + 6] = (DefaultKeyIdx & 0x03);
-               Key_Data[data_offset + 7] = 0x00;       // Reserved Byte
+               Key_Data[data_offset + 7] = 0x00;       /* Reserved Byte */
 
                data_offset += 8;
        }
 
-       // Encapsulate GTK
-       // Only for pairwise_msg3_WPA2 and group_msg1
+       /* Encapsulate GTK */
+       /* Only for pairwise_msg3_WPA2 and group_msg1 */
        if ((MsgType == EAPOL_PAIR_MSG_3 && bWPA2Capable)
            || (MsgType == EAPOL_GROUP_MSG_1)) {
-               // Fill in GTK
+               /* Fill in GTK */
                if (GroupKeyWepStatus == Ndis802_11Encryption3Enabled) {
                        NdisMoveMemory(&Key_Data[data_offset], GTK,
                                       LEN_AES_KEY);
@@ -2578,23 +2578,23 @@ VOID ConstructEapolKeyData(IN PMAC_TABLE_ENTRY pEntry,
                GTK_Included = TRUE;
        }
 
-       // This whole key-data field shall be encrypted if a GTK is included.
-       // Encrypt the data material in key data field with KEK
+       /* This whole key-data field shall be encrypted if a GTK is included. */
+       /* Encrypt the data material in key data field with KEK */
        if (GTK_Included) {
-               //hex_dump("GTK_Included", Key_Data, data_offset);
+               /*hex_dump("GTK_Included", Key_Data, data_offset); */
 
                if ((keyDescVer == DESC_TYPE_AES)) {
                        UCHAR remainder = 0;
                        UCHAR pad_len = 0;
 
-                       // Key Descriptor Version 2 or 3: AES key wrap, defined in IETF RFC 3394,
-                       // shall be used to encrypt the Key Data field using the KEK field from
-                       // the derived PTK.
+                       /* Key Descriptor Version 2 or 3: AES key wrap, defined in IETF RFC 3394, */
+                       /* shall be used to encrypt the Key Data field using the KEK field from */
+                       /* the derived PTK. */
 
-                       // If the Key Data field uses the NIST AES key wrap, then the Key Data field
-                       // shall be padded before encrypting if the key data length is less than 16
-                       // octets or if it is not a multiple of 8. The padding consists of appending
-                       // a single octet 0xdd followed by zero or more 0x00 octets.
+                       /* If the Key Data field uses the NIST AES key wrap, then the Key Data field */
+                       /* shall be padded before encrypting if the key data length is less than 16 */
+                       /* octets or if it is not a multiple of 8. The padding consists of appending */
+                       /* a single octet 0xdd followed by zero or more 0x00 octets. */
                        if ((remainder = data_offset & 0x07) != 0) {
                                INT i;
 
@@ -2608,22 +2608,22 @@ VOID ConstructEapolKeyData(IN PMAC_TABLE_ENTRY pEntry,
 
                        AES_GTK_KEY_WRAP(&pEntry->PTK[16], Key_Data,
                                         data_offset, Rc4GTK);
-                       // AES wrap function will grow 8 bytes in length
+                       /* AES wrap function will grow 8 bytes in length */
                        data_offset += 8;
                } else {
                        /*      Key Descriptor Version 1: ARC4 is used to encrypt the Key Data field
                           using the KEK field from the derived PTK. */
 
-                       // PREPARE Encrypted  "Key DATA" field.  (Encrypt GTK with RC4, usinf PTK[16]->[31] as Key, IV-field as IV)
-                       // put TxTsc in Key RSC field
-                       pAd->PrivateInfo.FCSCRC32 = PPPINITFCS32;       //Init crc32.
+                       /* PREPARE Encrypted  "Key DATA" field.  (Encrypt GTK with RC4, usinf PTK[16]->[31] as Key, IV-field as IV) */
+                       /* put TxTsc in Key RSC field */
+                       pAd->PrivateInfo.FCSCRC32 = PPPINITFCS32;       /*Init crc32. */
 
-                       // ekey is the contanetion of IV-field, and PTK[16]->PTK[31]
+                       /* ekey is the contanetion of IV-field, and PTK[16]->PTK[31] */
                        NdisMoveMemory(ekey, pMsg->KeyDesc.KeyIv,
                                       LEN_KEY_DESC_IV);
                        NdisMoveMemory(&ekey[LEN_KEY_DESC_IV], &pEntry->PTK[16],
                                       LEN_EAP_EK);
-                       ARCFOUR_INIT(&pAd->PrivateInfo.WEPCONTEXT, ekey, sizeof(ekey)); //INIT SBOX, KEYLEN+3(IV)
+                       ARCFOUR_INIT(&pAd->PrivateInfo.WEPCONTEXT, ekey, sizeof(ekey)); /*INIT SBOX, KEYLEN+3(IV) */
                        pAd->PrivateInfo.FCSCRC32 =
                            RTMP_CALC_FCS32(pAd->PrivateInfo.FCSCRC32, Key_Data,
                                            data_offset);
@@ -2636,7 +2636,7 @@ VOID ConstructEapolKeyData(IN PMAC_TABLE_ENTRY pEntry,
                NdisMoveMemory(pMsg->KeyDesc.KeyData, Key_Data, data_offset);
        }
 
-       // Update key data length field and total body length
+       /* Update key data length field and total body length */
        SET_UINT16_TO_ARRARY(pMsg->KeyDesc.KeyDataLen, data_offset);
        INC_UINT16_TO_ARRARY(pMsg->Body_Len, data_offset);
 
@@ -2668,21 +2668,21 @@ static VOID CalculateMIC(IN UCHAR KeyDescVer,
        UCHAR mic[LEN_KEY_DESC_MIC];
        UCHAR digest[80];
 
-       // allocate memory for MIC calculation
+       /* allocate memory for MIC calculation */
        os_alloc_mem(NULL, (PUCHAR *) & OutBuffer, 512);
 
        if (OutBuffer == NULL) {
                DBGPRINT(RT_DEBUG_ERROR, ("!!!CalculateMIC: no memory!!!\n"));
                return;
        }
-       // make a frame for calculating MIC.
+       /* make a frame for calculating MIC. */
        MakeOutgoingFrame(OutBuffer, &FrameLen,
                          CONV_ARRARY_TO_UINT16(pMsg->Body_Len) + 4, pMsg,
                          END_OF_ARGS);
 
        NdisZeroMemory(mic, sizeof(mic));
 
-       // Calculate MIC
+       /* Calculate MIC */
        if (KeyDescVer == DESC_TYPE_AES) {
                HMAC_SHA1(PTK, LEN_EAP_MICK, OutBuffer, FrameLen, digest,
                          SHA1_DIGEST_SIZE);
@@ -2692,7 +2692,7 @@ static VOID CalculateMIC(IN UCHAR KeyDescVer,
                         MD5_DIGEST_SIZE);
        }
 
-       // store the calculated MIC
+       /* store the calculated MIC */
        NdisMoveMemory(pMsg->KeyDesc.KeyMic, mic, LEN_KEY_DESC_MIC);
 
        os_free_mem(NULL, OutBuffer);
@@ -2721,52 +2721,52 @@ NDIS_STATUS RTMPSoftDecryptBroadCastData(IN PRTMP_ADAPTER pAd,
 {
        PRXWI_STRUC pRxWI = pRxBlk->pRxWI;
 
-       // handle WEP decryption
+       /* handle WEP decryption */
        if (GroupCipher == Ndis802_11Encryption1Enabled) {
                if (RTMPSoftDecryptWEP
                    (pAd, pRxBlk->pData, pRxWI->MPDUtotalByteCount,
                     pShard_key)) {
 
-                       //Minus IV[4] & ICV[4]
+                       /*Minus IV[4] & ICV[4] */
                        pRxWI->MPDUtotalByteCount -= 8;
                } else {
                        DBGPRINT(RT_DEBUG_ERROR,
                                 ("ERROR : Software decrypt WEP data fails.\n"));
-                       // give up this frame
+                       /* give up this frame */
                        return NDIS_STATUS_FAILURE;
                }
        }
-       // handle TKIP decryption
+       /* handle TKIP decryption */
        else if (GroupCipher == Ndis802_11Encryption2Enabled) {
                if (RTMPSoftDecryptTKIP
                    (pAd, pRxBlk->pData, pRxWI->MPDUtotalByteCount, 0,
                     pShard_key)) {
 
-                       //Minus 8 bytes MIC, 8 bytes IV/EIV, 4 bytes ICV
+                       /*Minus 8 bytes MIC, 8 bytes IV/EIV, 4 bytes ICV */
                        pRxWI->MPDUtotalByteCount -= 20;
                } else {
                        DBGPRINT(RT_DEBUG_ERROR,
                                 ("ERROR : RTMPSoftDecryptTKIP Failed\n"));
-                       // give up this frame
+                       /* give up this frame */
                        return NDIS_STATUS_FAILURE;
                }
        }
-       // handle AES decryption
+       /* handle AES decryption */
        else if (GroupCipher == Ndis802_11Encryption3Enabled) {
                if (RTMPSoftDecryptAES
                    (pAd, pRxBlk->pData, pRxWI->MPDUtotalByteCount,
                     pShard_key)) {
 
-                       //8 bytes MIC, 8 bytes IV/EIV (CCMP Header)
+                       /*8 bytes MIC, 8 bytes IV/EIV (CCMP Header) */
                        pRxWI->MPDUtotalByteCount -= 16;
                } else {
                        DBGPRINT(RT_DEBUG_ERROR,
                                 ("ERROR : RTMPSoftDecryptAES Failed\n"));
-                       // give up this frame
+                       /* give up this frame */
                        return NDIS_STATUS_FAILURE;
                }
        } else {
-               // give up this frame
+               /* give up this frame */
                return NDIS_STATUS_FAILURE;
        }
 
@@ -2786,18 +2786,18 @@ PUINT8 GetSuiteFromRSNIE(IN PUINT8 rsnie,
        BOOLEAN isWPA2 = FALSE;
 
        pEid = (PEID_STRUCT) rsnie;
-       len = rsnie_len - 2;    // exclude IE and length
+       len = rsnie_len - 2;    /* exclude IE and length */
        pBuf = (PUINT8) & pEid->Octet[0];
 
-       // set default value
+       /* set default value */
        *count = 0;
 
-       // Check length
+       /* Check length */
        if ((len <= 0) || (pEid->Len != len)) {
                DBGPRINT_ERR(("%s : The length is invalid\n", __func__));
                return NULL;
        }
-       // Check WPA or WPA2
+       /* Check WPA or WPA2 */
        if (pEid->Eid == IE_WPA) {
                PRSNIE pRsnie = (PRSNIE) pBuf;
                UINT16 ucount;
@@ -2807,18 +2807,18 @@ PUINT8 GetSuiteFromRSNIE(IN PUINT8 rsnie,
                                      __func__));
                        return NULL;
                }
-               // Get the count of pairwise cipher
+               /* Get the count of pairwise cipher */
                ucount = cpu2le16(pRsnie->ucount);
                if (ucount > 2) {
                        DBGPRINT_ERR(("%s : The count(%d) of pairwise cipher is invlaid\n", __func__, ucount));
                        return NULL;
                }
-               // Get the group cipher
+               /* Get the group cipher */
                if (type == GROUP_SUITE) {
                        *count = 1;
                        return pRsnie->mcast;
                }
-               // Get the pairwise cipher suite
+               /* Get the pairwise cipher suite */
                else if (type == PAIRWISE_SUITE) {
                        DBGPRINT(RT_DEBUG_TRACE,
                                 ("%s : The count of pairwise cipher is %d\n",
@@ -2840,18 +2840,18 @@ PUINT8 GetSuiteFromRSNIE(IN PUINT8 rsnie,
                                      __func__));
                        return NULL;
                }
-               // Get the count of pairwise cipher
+               /* Get the count of pairwise cipher */
                ucount = cpu2le16(pRsnie->ucount);
                if (ucount > 2) {
                        DBGPRINT_ERR(("%s : The count(%d) of pairwise cipher is invlaid\n", __func__, ucount));
                        return NULL;
                }
-               // Get the group cipher
+               /* Get the group cipher */
                if (type == GROUP_SUITE) {
                        *count = 1;
                        return pRsnie->mcast;
                }
-               // Get the pairwise cipher suite
+               /* Get the pairwise cipher suite */
                else if (type == PAIRWISE_SUITE) {
                        DBGPRINT(RT_DEBUG_TRACE,
                                 ("%s : The count of pairwise cipher is %d\n",
@@ -2867,7 +2867,7 @@ PUINT8 GetSuiteFromRSNIE(IN PUINT8 rsnie,
                return NULL;
        }
 
-       // skip group cipher and pairwise cipher suite
+       /* skip group cipher and pairwise cipher suite */
        pBuf += offset;
        len -= offset;
 
@@ -2876,17 +2876,17 @@ PUINT8 GetSuiteFromRSNIE(IN PUINT8 rsnie,
                              __func__));
                return NULL;
        }
-       // pointer to AKM count
+       /* pointer to AKM count */
        pAkm = (PRSNIE_AUTH) pBuf;
 
-       // Get the count of pairwise cipher
+       /* Get the count of pairwise cipher */
        acount = cpu2le16(pAkm->acount);
        if (acount > 2) {
                DBGPRINT_ERR(("%s : The count(%d) of AKM is invlaid\n",
                              __func__, acount));
                return NULL;
        }
-       // Get the AKM suite
+       /* Get the AKM suite */
        if (type == AKM_SUITE) {
                DBGPRINT(RT_DEBUG_TRACE, ("%s : The count of AKM is %d\n",
                                          __func__, acount));
@@ -2898,13 +2898,13 @@ PUINT8 GetSuiteFromRSNIE(IN PUINT8 rsnie,
        pBuf += offset;
        len -= offset;
 
-       // The remaining length must larger than (RSN-Capability(2) + PMKID-Count(2) + PMKID(16~))
+       /* The remaining length must larger than (RSN-Capability(2) + PMKID-Count(2) + PMKID(16~)) */
        if (len >= (sizeof(RSN_CAPABILITIES) + 2 + LEN_PMKID)) {
-               // Skip RSN capability and PMKID-Count
+               /* Skip RSN capability and PMKID-Count */
                pBuf += (sizeof(RSN_CAPABILITIES) + 2);
                len -= (sizeof(RSN_CAPABILITIES) + 2);
 
-               // Get PMKID
+               /* Get PMKID */
                if (type == PMKID_LIST) {
                        *count = 1;
                        return pBuf;
@@ -2915,7 +2915,7 @@ PUINT8 GetSuiteFromRSNIE(IN PUINT8 rsnie,
        }
 
        *count = 0;
-       //DBGPRINT_ERR(("%s : The type(%d) doesn't support \n", __func__, type));
+       /*DBGPRINT_ERR(("%s : The type(%d) doesn't support \n", __func__, type)); */
        return NULL;
 
 }
@@ -2927,24 +2927,24 @@ VOID WpaShowAllsuite(IN PUINT8 rsnie, IN UINT rsnie_len)
 
        hex_dump("RSNIE", rsnie, rsnie_len);
 
-       // group cipher
+       /* group cipher */
        if ((pSuite =
             GetSuiteFromRSNIE(rsnie, rsnie_len, GROUP_SUITE,
                               &count)) != NULL) {
                hex_dump("group cipher", pSuite, 4 * count);
        }
-       // pairwise cipher
+       /* pairwise cipher */
        if ((pSuite =
             GetSuiteFromRSNIE(rsnie, rsnie_len, PAIRWISE_SUITE,
                               &count)) != NULL) {
                hex_dump("pairwise cipher", pSuite, 4 * count);
        }
-       // AKM
+       /* AKM */
        if ((pSuite =
             GetSuiteFromRSNIE(rsnie, rsnie_len, AKM_SUITE, &count)) != NULL) {
                hex_dump("AKM suite", pSuite, 4 * count);
        }
-       // PMKID
+       /* PMKID */
        if ((pSuite =
             GetSuiteFromRSNIE(rsnie, rsnie_len, PMKID_LIST, &count)) != NULL) {
                hex_dump("PMKID", pSuite, LEN_PMKID);
index 8e71add..8e49cd7 100644 (file)
@@ -83,23 +83,23 @@ UCHAR eFuseReadRegisters(IN PRTMP_ADAPTER pAd,
 
        RTMP_IO_READ32(pAd, EFUSE_CTRL, &eFuseCtrlStruc.word);
 
-       //Step0. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment.
-       //Use the eeprom logical address and covert to address to block number
+       /*Step0. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment. */
+       /*Use the eeprom logical address and covert to address to block number */
        eFuseCtrlStruc.field.EFSROM_AIN = Offset & 0xfff0;
 
-       //Step1. Write EFSROM_MODE (0x580, bit7:bit6) to 0.
+       /*Step1. Write EFSROM_MODE (0x580, bit7:bit6) to 0. */
        eFuseCtrlStruc.field.EFSROM_MODE = 0;
 
-       //Step2. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical read procedure.
+       /*Step2. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical read procedure. */
        eFuseCtrlStruc.field.EFSROM_KICK = 1;
 
        NdisMoveMemory(&data, &eFuseCtrlStruc, 4);
        RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data);
 
-       //Step3. Polling EFSROM_KICK(0x580, bit30) until it become 0 again.
+       /*Step3. Polling EFSROM_KICK(0x580, bit30) until it become 0 again. */
        i = 0;
        while (i < 500) {
-               //rtmp.HwMemoryReadDword(EFUSE_CTRL, (DWORD *) &eFuseCtrlStruc, 4);
+               /*rtmp.HwMemoryReadDword(EFUSE_CTRL, (DWORD *) &eFuseCtrlStruc, 4); */
                RTMP_IO_READ32(pAd, EFUSE_CTRL, &eFuseCtrlStruc.word);
                if (eFuseCtrlStruc.field.EFSROM_KICK == 0) {
                        break;
@@ -108,25 +108,25 @@ UCHAR eFuseReadRegisters(IN PRTMP_ADAPTER pAd,
                i++;
        }
 
-       //if EFSROM_AOUT is not found in physical address, write 0xffff
+       /*if EFSROM_AOUT is not found in physical address, write 0xffff */
        if (eFuseCtrlStruc.field.EFSROM_AOUT == 0x3f) {
                for (i = 0; i < Length / 2; i++)
                        *(pData + 2 * i) = 0xffff;
        } else {
-               //Step4. Read 16-byte of data from EFUSE_DATA0-3 (0x590-0x59C)
+               /*Step4. Read 16-byte of data from EFUSE_DATA0-3 (0x590-0x59C) */
                efuseDataOffset = EFUSE_DATA3 - (Offset & 0xC);
-               //data hold 4 bytes data.
-               //In RTMP_IO_READ32 will automatically execute 32-bytes swapping
+               /*data hold 4 bytes data. */
+               /*In RTMP_IO_READ32 will automatically execute 32-bytes swapping */
                RTMP_IO_READ32(pAd, efuseDataOffset, &data);
-               //Decide the upper 2 bytes or the bottom 2 bytes.
-               // Little-endian                S       |       S       Big-endian
-               // addr 3       2       1       0       |       0       1       2       3
-               // Ori-V        D       C       B       A       |       A       B       C       D
-               //After swapping
-               //              D       C       B       A       |       D       C       B       A
-               //Return 2-bytes
-               //The return byte statrs from S. Therefore, the little-endian will return BA, the Big-endian will return DC.
-               //For returning the bottom 2 bytes, the Big-endian should shift right 2-bytes.
+               /*Decide the upper 2 bytes or the bottom 2 bytes. */
+               /* Little-endian                S       |       S       Big-endian */
+               /* addr 3       2       1       0       |       0       1       2       3 */
+               /* Ori-V        D       C       B       A       |       A       B       C       D */
+               /*After swapping */
+               /*              D       C       B       A       |       D       C       B       A */
+               /*Return 2-bytes */
+               /*The return byte statrs from S. Therefore, the little-endian will return BA, the Big-endian will return DC. */
+               /*For returning the bottom 2 bytes, the Big-endian should shift right 2-bytes. */
                data = data >> (8 * (Offset & 0x3));
 
                NdisMoveMemory(pData, &data, Length);
@@ -160,20 +160,20 @@ VOID eFusePhysicalReadRegisters(IN PRTMP_ADAPTER pAd,
 
        RTMP_IO_READ32(pAd, EFUSE_CTRL, &eFuseCtrlStruc.word);
 
-       //Step0. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment.
+       /*Step0. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment. */
        eFuseCtrlStruc.field.EFSROM_AIN = Offset & 0xfff0;
 
-       //Step1. Write EFSROM_MODE (0x580, bit7:bit6) to 1.
-       //Read in physical view
+       /*Step1. Write EFSROM_MODE (0x580, bit7:bit6) to 1. */
+       /*Read in physical view */
        eFuseCtrlStruc.field.EFSROM_MODE = 1;
 
-       //Step2. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical read procedure.
+       /*Step2. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical read procedure. */
        eFuseCtrlStruc.field.EFSROM_KICK = 1;
 
        NdisMoveMemory(&data, &eFuseCtrlStruc, 4);
        RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data);
 
-       //Step3. Polling EFSROM_KICK(0x580, bit30) until it become 0 again.
+       /*Step3. Polling EFSROM_KICK(0x580, bit30) until it become 0 again. */
        i = 0;
        while (i < 500) {
                RTMP_IO_READ32(pAd, EFUSE_CTRL, &eFuseCtrlStruc.word);
@@ -183,14 +183,14 @@ VOID eFusePhysicalReadRegisters(IN PRTMP_ADAPTER pAd,
                i++;
        }
 
-       //Step4. Read 16-byte of data from EFUSE_DATA0-3 (0x59C-0x590)
-       //Because the size of each EFUSE_DATA is 4 Bytes, the size of address of each is 2 bits.
-       //The previous 2 bits is the EFUSE_DATA number, the last 2 bits is used to decide which bytes
-       //Decide which EFUSE_DATA to read
-       //590:F E D C
-       //594:B A 9 8
-       //598:7 6 5 4
-       //59C:3 2 1 0
+       /*Step4. Read 16-byte of data from EFUSE_DATA0-3 (0x59C-0x590) */
+       /*Because the size of each EFUSE_DATA is 4 Bytes, the size of address of each is 2 bits. */
+       /*The previous 2 bits is the EFUSE_DATA number, the last 2 bits is used to decide which bytes */
+       /*Decide which EFUSE_DATA to read */
+       /*590:F E D C */
+       /*594:B A 9 8 */
+       /*598:7 6 5 4 */
+       /*59C:3 2 1 0 */
        efuseDataOffset = EFUSE_DATA3 - (Offset & 0xC);
 
        RTMP_IO_READ32(pAd, efuseDataOffset, &data);
@@ -222,8 +222,8 @@ static VOID eFuseReadPhysical(IN PRTMP_ADAPTER pAd,
        USHORT *pInBuf = (USHORT *) lpInBuffer;
        USHORT *pOutBuf = (USHORT *) lpOutBuffer;
 
-       USHORT Offset = pInBuf[0];      //addr
-       USHORT Length = pInBuf[1];      //length
+       USHORT Offset = pInBuf[0];      /*addr */
+       USHORT Length = pInBuf[1];      /*length */
        int i;
 
        for (i = 0; i < Length; i += 2) {
index b5be6f0..fa3f231 100644 (file)
 
 #include       "../rt_config.h"
 
-// IRQL = PASSIVE_LEVEL
+/* IRQL = PASSIVE_LEVEL */
 static inline VOID RaiseClock(IN PRTMP_ADAPTER pAd, IN UINT32 * x)
 {
        *x = *x | EESK;
        RTMP_IO_WRITE32(pAd, E2PROM_CSR, *x);
-       RTMPusecDelay(1);       // Max frequency = 1MHz in Spec. definition
+       RTMPusecDelay(1);       /* Max frequency = 1MHz in Spec. definition */
 }
 
-// IRQL = PASSIVE_LEVEL
+/* IRQL = PASSIVE_LEVEL */
 static inline VOID LowerClock(IN PRTMP_ADAPTER pAd, IN UINT32 * x)
 {
        *x = *x & ~EESK;
@@ -53,7 +53,7 @@ static inline VOID LowerClock(IN PRTMP_ADAPTER pAd, IN UINT32 * x)
        RTMPusecDelay(1);
 }
 
-// IRQL = PASSIVE_LEVEL
+/* IRQL = PASSIVE_LEVEL */
 static inline USHORT ShiftInBits(IN PRTMP_ADAPTER pAd)
 {
        UINT32 x, i;
@@ -68,7 +68,7 @@ static inline USHORT ShiftInBits(IN PRTMP_ADAPTER pAd)
                RaiseClock(pAd, &x);
 
                RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
-               LowerClock(pAd, &x);    //prevent read failed
+               LowerClock(pAd, &x);    /*prevent read failed */
 
                x &= ~(EEDI);
                if (x & EEDO)
@@ -78,7 +78,7 @@ static inline USHORT ShiftInBits(IN PRTMP_ADAPTER pAd)
        return data;
 }
 
-// IRQL = PASSIVE_LEVEL
+/* IRQL = PASSIVE_LEVEL */
 static inline VOID ShiftOutBits(IN PRTMP_ADAPTER pAd,
                                IN USHORT data, IN USHORT count)
 {
@@ -106,7 +106,7 @@ static inline VOID ShiftOutBits(IN PRTMP_ADAPTER pAd,
        RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
 }
 
-// IRQL = PASSIVE_LEVEL
+/* IRQL = PASSIVE_LEVEL */
 static inline VOID EEpromCleanup(IN PRTMP_ADAPTER pAd)
 {
        UINT32 x;
@@ -124,17 +124,17 @@ static inline VOID EWEN(IN PRTMP_ADAPTER pAd)
 {
        UINT32 x;
 
-       // reset bits and set EECS
+       /* reset bits and set EECS */
        RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
        x &= ~(EEDI | EEDO | EESK);
        x |= EECS;
        RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
 
-       // kick a pulse
+       /* kick a pulse */
        RaiseClock(pAd, &x);
        LowerClock(pAd, &x);
 
-       // output the read_opcode and six pulse in that order
+       /* output the read_opcode and six pulse in that order */
        ShiftOutBits(pAd, EEPROM_EWEN_OPCODE, 5);
        ShiftOutBits(pAd, 0, 6);
 
@@ -145,24 +145,24 @@ static inline VOID EWDS(IN PRTMP_ADAPTER pAd)
 {
        UINT32 x;
 
-       // reset bits and set EECS
+       /* reset bits and set EECS */
        RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
        x &= ~(EEDI | EEDO | EESK);
        x |= EECS;
        RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
 
-       // kick a pulse
+       /* kick a pulse */
        RaiseClock(pAd, &x);
        LowerClock(pAd, &x);
 
-       // output the read_opcode and six pulse in that order
+       /* output the read_opcode and six pulse in that order */
        ShiftOutBits(pAd, EEPROM_EWDS_OPCODE, 5);
        ShiftOutBits(pAd, 0, 6);
 
        EEpromCleanup(pAd);
 }
 
-// IRQL = PASSIVE_LEVEL
+/* IRQL = PASSIVE_LEVEL */
 int rtmp_ee_prom_read16(IN PRTMP_ADAPTER pAd,
                        IN USHORT Offset, OUT USHORT * pValue)
 {
@@ -170,23 +170,23 @@ int rtmp_ee_prom_read16(IN PRTMP_ADAPTER pAd,
        USHORT data;
 
        Offset /= 2;
-       // reset bits and set EECS
+       /* reset bits and set EECS */
        RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
        x &= ~(EEDI | EEDO | EESK);
        x |= EECS;
        RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
 
-       // patch can not access e-Fuse issue
+       /* patch can not access e-Fuse issue */
        if (!(IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd))) {
-               // kick a pulse
+               /* kick a pulse */
                RaiseClock(pAd, &x);
                LowerClock(pAd, &x);
        }
-       // output the read_opcode and register number in that order
+       /* output the read_opcode and register number in that order */
        ShiftOutBits(pAd, EEPROM_READ_OPCODE, 3);
        ShiftOutBits(pAd, Offset, pAd->EEPROMAddressNum);
 
-       // Now read the data (16 bits) in from the selected EEPROM word
+       /* Now read the data (16 bits) in from the selected EEPROM word */
        data = ShiftInBits(pAd);
 
        EEpromCleanup(pAd);
index 872b47c..202d313 100644 (file)
@@ -65,8 +65,8 @@ INT RtmpChipOpsEepromHook(IN RTMP_ADAPTER * pAd, IN INT infType)
                return 0;
        } else
                DBGPRINT(RT_DEBUG_TRACE, ("NVM is EEPROM\n"));
-#endif // RTMP_EFUSE_SUPPORT //
-#endif // RT30xx //
+#endif /* RTMP_EFUSE_SUPPORT // */
+#endif /* RT30xx // */
 
        switch (infType) {
 #ifdef RTMP_PCI_SUPPORT
@@ -74,13 +74,13 @@ INT RtmpChipOpsEepromHook(IN RTMP_ADAPTER * pAd, IN INT infType)
                pChipOps->eeinit = NULL;
                pChipOps->eeread = rtmp_ee_prom_read16;
                break;
-#endif // RTMP_PCI_SUPPORT //
+#endif /* RTMP_PCI_SUPPORT // */
 #ifdef RTMP_USB_SUPPORT
        case RTMP_DEV_INF_USB:
                pChipOps->eeinit = NULL;
                pChipOps->eeread = RTUSBReadEEPROM16;
                break;
-#endif // RTMP_USB_SUPPORT //
+#endif /* RTMP_USB_SUPPORT // */
 
        default:
                DBGPRINT(RT_DEBUG_ERROR, ("RtmpChipOpsEepromHook() failed!\n"));
index 1d97b73..e047b89 100644 (file)
@@ -52,8 +52,8 @@ UCHAR WPS_OUI[] = { 0x00, 0x50, 0xf2, 0x04 };
 UCHAR PRE_N_HT_OUI[] = { 0x00, 0x90, 0x4c };
 
 UCHAR RateSwitchTable[] = {
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown             // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-       0x11, 0x00, 0, 0, 0,    // Initial used item after association
+/* Item No.   Mode   Curr-MCS   TrainUp   TrainDown             // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) */
+       0x11, 0x00, 0, 0, 0,    /* Initial used item after association */
        0x00, 0x00, 0, 40, 101,
        0x01, 0x00, 1, 40, 50,
        0x02, 0x00, 2, 35, 45,
@@ -89,8 +89,8 @@ UCHAR RateSwitchTable[] = {
 };
 
 UCHAR RateSwitchTable11B[] = {
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown             // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-       0x04, 0x03, 0, 0, 0,    // Initial used item after association
+/* Item No.   Mode   Curr-MCS   TrainUp   TrainDown             // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) */
+       0x04, 0x03, 0, 0, 0,    /* Initial used item after association */
        0x00, 0x00, 0, 40, 101,
        0x01, 0x00, 1, 40, 50,
        0x02, 0x00, 2, 35, 45,
@@ -98,8 +98,8 @@ UCHAR RateSwitchTable11B[] = {
 };
 
 UCHAR RateSwitchTable11BG[] = {
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown             // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-       0x0a, 0x00, 0, 0, 0,    // Initial used item after association
+/* Item No.   Mode   Curr-MCS   TrainUp   TrainDown             // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) */
+       0x0a, 0x00, 0, 0, 0,    /* Initial used item after association */
        0x00, 0x00, 0, 40, 101,
        0x01, 0x00, 1, 40, 50,
        0x02, 0x00, 2, 35, 45,
@@ -113,8 +113,8 @@ UCHAR RateSwitchTable11BG[] = {
 };
 
 UCHAR RateSwitchTable11G[] = {
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown             // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-       0x08, 0x00, 0, 0, 0,    // Initial used item after association
+/* Item No.   Mode   Curr-MCS   TrainUp   TrainDown             // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) */
+       0x08, 0x00, 0, 0, 0,    /* Initial used item after association */
        0x00, 0x10, 0, 20, 101,
        0x01, 0x10, 1, 20, 35,
        0x02, 0x10, 2, 20, 35,
@@ -126,8 +126,8 @@ UCHAR RateSwitchTable11G[] = {
 };
 
 UCHAR RateSwitchTable11N1S[] = {
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown             // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-       0x0c, 0x0a, 0, 0, 0,    // Initial used item after association
+/* Item No.   Mode   Curr-MCS   TrainUp   TrainDown             // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) */
+       0x0c, 0x0a, 0, 0, 0,    /* Initial used item after association */
        0x00, 0x00, 0, 40, 101,
        0x01, 0x00, 1, 40, 50,
        0x02, 0x00, 2, 25, 45,
@@ -143,8 +143,8 @@ UCHAR RateSwitchTable11N1S[] = {
 };
 
 UCHAR RateSwitchTable11N2S[] = {
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown             // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-       0x0e, 0x0c, 0, 0, 0,    // Initial used item after association
+/* Item No.   Mode   Curr-MCS   TrainUp   TrainDown             // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) */
+       0x0e, 0x0c, 0, 0, 0,    /* Initial used item after association */
        0x00, 0x00, 0, 40, 101,
        0x01, 0x00, 1, 40, 50,
        0x02, 0x00, 2, 25, 45,
@@ -162,24 +162,24 @@ UCHAR RateSwitchTable11N2S[] = {
 };
 
 UCHAR RateSwitchTable11N3S[] = {
-// Item No.     Mode    Curr-MCS        TrainUp TrainDown       // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-       0x0b, 0x00, 0, 0, 0,    // 0x0a, 0x00,  0,  0,  0,      // Initial used item after association
+/* Item No.     Mode    Curr-MCS        TrainUp TrainDown       // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) */
+       0x0b, 0x00, 0, 0, 0,    /* 0x0a, 0x00,  0,  0,  0,      // Initial used item after association */
        0x00, 0x21, 0, 30, 101,
        0x01, 0x21, 1, 20, 50,
        0x02, 0x21, 2, 20, 50,
        0x03, 0x21, 3, 15, 50,
        0x04, 0x21, 4, 15, 30,
-       0x05, 0x20, 11, 15, 30, // Required by System-Alan @ 20080812
-       0x06, 0x20, 12, 15, 30, // 0x05, 0x20, 12, 15, 30,
-       0x07, 0x20, 13, 8, 20,  // 0x06, 0x20, 13,  8, 20,
-       0x08, 0x20, 14, 8, 20,  // 0x07, 0x20, 14,  8, 20,
-       0x09, 0x20, 15, 8, 25,  // 0x08, 0x20, 15,  8, 25,
-       0x0a, 0x22, 15, 8, 25,  // 0x09, 0x22, 15,  8, 25,
+       0x05, 0x20, 11, 15, 30, /* Required by System-Alan @ 20080812 */
+       0x06, 0x20, 12, 15, 30, /* 0x05, 0x20, 12, 15, 30, */
+       0x07, 0x20, 13, 8, 20,  /* 0x06, 0x20, 13,  8, 20, */
+       0x08, 0x20, 14, 8, 20,  /* 0x07, 0x20, 14,  8, 20, */
+       0x09, 0x20, 15, 8, 25,  /* 0x08, 0x20, 15,  8, 25, */
+       0x0a, 0x22, 15, 8, 25,  /* 0x09, 0x22, 15,  8, 25, */
 };
 
 UCHAR RateSwitchTable11N2SForABand[] = {
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown             // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-       0x0b, 0x09, 0, 0, 0,    // Initial used item after association
+/* Item No.   Mode   Curr-MCS   TrainUp   TrainDown             // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) */
+       0x0b, 0x09, 0, 0, 0,    /* Initial used item after association */
        0x00, 0x21, 0, 30, 101,
        0x01, 0x21, 1, 20, 50,
        0x02, 0x21, 2, 20, 50,
@@ -193,9 +193,9 @@ UCHAR RateSwitchTable11N2SForABand[] = {
        0x0a, 0x22, 15, 8, 25,
 };
 
-UCHAR RateSwitchTable11N3SForABand[] = {       // 3*3
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown             // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-       0x0b, 0x09, 0, 0, 0,    // Initial used item after association
+UCHAR RateSwitchTable11N3SForABand[] = {       /* 3*3 */
+/* Item No.   Mode   Curr-MCS   TrainUp   TrainDown             // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) */
+       0x0b, 0x09, 0, 0, 0,    /* Initial used item after association */
        0x00, 0x21, 0, 30, 101,
        0x01, 0x21, 1, 20, 50,
        0x02, 0x21, 2, 20, 50,
@@ -210,8 +210,8 @@ UCHAR RateSwitchTable11N3SForABand[] = {    // 3*3
 };
 
 UCHAR RateSwitchTable11BGN1S[] = {
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown             // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-       0x0c, 0x0a, 0, 0, 0,    // Initial used item after association
+/* Item No.   Mode   Curr-MCS   TrainUp   TrainDown             // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) */
+       0x0c, 0x0a, 0, 0, 0,    /* Initial used item after association */
        0x00, 0x00, 0, 40, 101,
        0x01, 0x00, 1, 40, 50,
        0x02, 0x00, 2, 25, 45,
@@ -227,8 +227,8 @@ UCHAR RateSwitchTable11BGN1S[] = {
 };
 
 UCHAR RateSwitchTable11BGN2S[] = {
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown             // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-       0x0e, 0x0c, 0, 0, 0,    // Initial used item after association
+/* Item No.   Mode   Curr-MCS   TrainUp   TrainDown             // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) */
+       0x0e, 0x0c, 0, 0, 0,    /* Initial used item after association */
        0x00, 0x00, 0, 40, 101,
        0x01, 0x00, 1, 40, 50,
        0x02, 0x00, 2, 25, 45,
@@ -245,10 +245,10 @@ UCHAR RateSwitchTable11BGN2S[] = {
        0x0d, 0x22, 15, 8, 15,
 };
 
-UCHAR RateSwitchTable11BGN3S[] = {     // 3*3
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown             // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-       0x0a, 0x00, 0, 0, 0,    // Initial used item after association
-       0x00, 0x21, 0, 30, 101, //50
+UCHAR RateSwitchTable11BGN3S[] = {     /* 3*3 */
+/* Item No.   Mode   Curr-MCS   TrainUp   TrainDown             // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) */
+       0x0a, 0x00, 0, 0, 0,    /* Initial used item after association */
+       0x00, 0x21, 0, 30, 101, /*50 */
        0x01, 0x21, 1, 20, 50,
        0x02, 0x21, 2, 20, 50,
        0x03, 0x21, 3, 20, 50,
@@ -261,9 +261,9 @@ UCHAR RateSwitchTable11BGN3S[] = {  // 3*3
 };
 
 UCHAR RateSwitchTable11BGN2SForABand[] = {
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown             // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-       0x0b, 0x09, 0, 0, 0,    // Initial used item after association
-       0x00, 0x21, 0, 30, 101, //50
+/* Item No.   Mode   Curr-MCS   TrainUp   TrainDown             // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) */
+       0x0b, 0x09, 0, 0, 0,    /* Initial used item after association */
+       0x00, 0x21, 0, 30, 101, /*50 */
        0x01, 0x21, 1, 20, 50,
        0x02, 0x21, 2, 20, 50,
        0x03, 0x21, 3, 15, 50,
@@ -276,10 +276,10 @@ UCHAR RateSwitchTable11BGN2SForABand[] = {
        0x0a, 0x22, 15, 8, 25,
 };
 
-UCHAR RateSwitchTable11BGN3SForABand[] = {     // 3*3
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown             // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-       0x0c, 0x09, 0, 0, 0,    // Initial used item after association
-       0x00, 0x21, 0, 30, 101, //50
+UCHAR RateSwitchTable11BGN3SForABand[] = {     /* 3*3 */
+/* Item No.   Mode   Curr-MCS   TrainUp   TrainDown             // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) */
+       0x0c, 0x09, 0, 0, 0,    /* Initial used item after association */
+       0x00, 0x21, 0, 30, 101, /*50 */
        0x01, 0x21, 1, 20, 50,
        0x02, 0x21, 2, 20, 50,
        0x03, 0x21, 3, 15, 50,
@@ -294,8 +294,8 @@ UCHAR RateSwitchTable11BGN3SForABand[] = {  // 3*3
 };
 
 extern UCHAR OfdmRateToRxwiMCS[];
-// since RT61 has better RX sensibility, we have to limit TX ACK rate not to exceed our normal data TX rate.
-// otherwise the WLAN peer may not be able to receive the ACK thus downgrade its data TX rate
+/* since RT61 has better RX sensibility, we have to limit TX ACK rate not to exceed our normal data TX rate. */
+/* otherwise the WLAN peer may not be able to receive the ACK thus downgrade its data TX rate */
 ULONG BasicRateMask[12] =
     { 0xfffff001 /* 1-Mbps */ , 0xfffff003 /* 2 Mbps */ , 0xfffff007 /* 5.5 */ ,
 0xfffff00f /* 11 */ ,
@@ -308,10 +308,10 @@ ULONG BasicRateMask[12] =
 UCHAR BROADCAST_ADDR[MAC_ADDR_LEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
 UCHAR ZERO_MAC_ADDR[MAC_ADDR_LEN] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
 
-// e.g. RssiSafeLevelForTxRate[RATE_36]" means if the current RSSI is greater than
-//              this value, then it's quaranteed capable of operating in 36 mbps TX rate in
-//              clean environment.
-//                                                                TxRate: 1   2   5.5   11       6        9    12       18       24   36   48   54       72  100
+/* e.g. RssiSafeLevelForTxRate[RATE_36]" means if the current RSSI is greater than */
+/*              this value, then it's quaranteed capable of operating in 36 mbps TX rate in */
+/*              clean environment. */
+/*                                                                TxRate: 1   2   5.5   11       6        9    12       18       24   36   48   54       72  100 */
 CHAR RssiSafeLevelForTxRate[] =
     { -92, -91, -90, -87, -88, -86, -85, -83, -81, -78, -72, -71, -40, -40 };
 
@@ -373,7 +373,7 @@ NDIS_STATUS MlmeInit(IN PRTMP_ADAPTER pAd)
                {
                        BssTableInit(&pAd->ScanTab);
 
-                       // init STA state machines
+                       /* init STA state machines */
                        AssocStateMachineInit(pAd, &pAd->Mlme.AssocMachine,
                                              pAd->Mlme.AssocFunc);
                        AuthStateMachineInit(pAd, &pAd->Mlme.AuthMachine,
@@ -383,8 +383,8 @@ NDIS_STATUS MlmeInit(IN PRTMP_ADAPTER pAd)
                        SyncStateMachineInit(pAd, &pAd->Mlme.SyncMachine,
                                             pAd->Mlme.SyncFunc);
 
-                       // Since we are using switch/case to implement it, the init is different from the above
-                       // state machine init
+                       /* Since we are using switch/case to implement it, the init is different from the above */
+                       /* state machine init */
                        MlmeCntlInit(pAd, &pAd->Mlme.CntlMachine, NULL);
                }
 
@@ -394,14 +394,14 @@ NDIS_STATUS MlmeInit(IN PRTMP_ADAPTER pAd)
                ActionStateMachineInit(pAd, &pAd->Mlme.ActMachine,
                                       pAd->Mlme.ActFunc);
 
-               // Init mlme periodic timer
+               /* Init mlme periodic timer */
                RTMPInitTimer(pAd, &pAd->Mlme.PeriodicTimer,
                              GET_TIMER_FUNCTION(MlmePeriodicExec), pAd, TRUE);
 
-               // Set mlme periodic timer
+               /* Set mlme periodic timer */
                RTMPSetTimer(&pAd->Mlme.PeriodicTimer, MLME_TASK_EXEC_INTV);
 
-               // software-based RX Antenna diversity
+               /* software-based RX Antenna diversity */
                RTMPInitTimer(pAd, &pAd->Mlme.RxAntEvalTimer,
                              GET_TIMER_FUNCTION(AsicRxAntEvalTimeout), pAd,
                              FALSE);
@@ -409,7 +409,7 @@ NDIS_STATUS MlmeInit(IN PRTMP_ADAPTER pAd)
                {
 #ifdef RTMP_PCI_SUPPORT
                        if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_PCIE_DEVICE)) {
-                               // only PCIe cards need these two timers
+                               /* only PCIe cards need these two timers */
                                RTMPInitTimer(pAd, &pAd->Mlme.PsPollTimer,
                                              GET_TIMER_FUNCTION
                                              (PsPollWakeExec), pAd, FALSE);
@@ -417,7 +417,7 @@ NDIS_STATUS MlmeInit(IN PRTMP_ADAPTER pAd)
                                              GET_TIMER_FUNCTION(RadioOnExec),
                                              pAd, FALSE);
                        }
-#endif // RTMP_PCI_SUPPORT //
+#endif /* RTMP_PCI_SUPPORT // */
 
                        RTMPInitTimer(pAd, &pAd->Mlme.LinkDownTimer,
                                      GET_TIMER_FUNCTION(LinkDownExec), pAd,
@@ -429,7 +429,7 @@ NDIS_STATUS MlmeInit(IN PRTMP_ADAPTER pAd)
                                      (RtmpUsbStaAsicForceWakeupTimeout), pAd,
                                      FALSE);
                        pAd->Mlme.AutoWakeupTimerRunning = FALSE;
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
                }
 
        } while (FALSE);
@@ -457,8 +457,8 @@ VOID MlmeHandler(IN PRTMP_ADAPTER pAd)
 {
        MLME_QUEUE_ELEM *Elem = NULL;
 
-       // Only accept MLME and Frame from peer side, no other (control/data) frame should
-       // get into this state machine
+       /* Only accept MLME and Frame from peer side, no other (control/data) frame should */
+       /* get into this state machine */
 
        NdisAcquireSpinLock(&pAd->Mlme.TaskLock);
        if (pAd->Mlme.bRunning) {
@@ -478,7 +478,7 @@ VOID MlmeHandler(IN PRTMP_ADAPTER pAd)
                                  pAd->Mlme.Queue.Num));
                        break;
                }
-               //From message type, determine which state machine I should drive
+               /*From message type, determine which state machine I should drive */
                if (MlmeDequeue(&pAd->Mlme.Queue, &Elem)) {
 #ifdef RTMP_MAC_USB
                        if (Elem->MsgType == MT2_RESET_CONF) {
@@ -489,11 +489,11 @@ VOID MlmeHandler(IN PRTMP_ADAPTER pAd)
                                Elem->MsgLen = 0;
                                continue;
                        }
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
-                       // if dequeue success
+                       /* if dequeue success */
                        switch (Elem->Machine) {
-                               // STA state machines
+                               /* STA state machines */
                        case ASSOC_STATE_MACHINE:
                                StateMachinePerformAction(pAd,
                                                          &pAd->Mlme.
@@ -542,9 +542,9 @@ VOID MlmeHandler(IN PRTMP_ADAPTER pAd)
                                         ("ERROR: Illegal machine %ld in MlmeHandler()\n",
                                          Elem->Machine));
                                break;
-                       }       // end of switch
+                       }       /* end of switch */
 
-                       // free MLME element
+                       /* free MLME element */
                        Elem->Occupied = FALSE;
                        Elem->MsgLen = 0;
 
@@ -578,12 +578,12 @@ VOID MlmeHalt(IN PRTMP_ADAPTER pAd)
        DBGPRINT(RT_DEBUG_TRACE, ("==> MlmeHalt\n"));
 
        if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) {
-               // disable BEACON generation and other BEACON related hardware timers
+               /* disable BEACON generation and other BEACON related hardware timers */
                AsicDisableSync(pAd);
        }
 
        {
-               // Cancel pending timers
+               /* Cancel pending timers */
                RTMPCancelTimer(&pAd->MlmeAux.AssocTimer, &Cancelled);
                RTMPCancelTimer(&pAd->MlmeAux.ReassocTimer, &Cancelled);
                RTMPCancelTimer(&pAd->MlmeAux.DisassocTimer, &Cancelled);
@@ -597,13 +597,13 @@ VOID MlmeHalt(IN PRTMP_ADAPTER pAd)
                        RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled);
                        RTMPCancelTimer(&pAd->Mlme.RadioOnOffTimer, &Cancelled);
                }
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
                RTMPCancelTimer(&pAd->Mlme.LinkDownTimer, &Cancelled);
 
 #ifdef RTMP_MAC_USB
                RTMPCancelTimer(&pAd->Mlme.AutoWakeupTimer, &Cancelled);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
        }
 
        RTMPCancelTimer(&pAd->Mlme.PeriodicTimer, &Cancelled);
@@ -612,9 +612,9 @@ VOID MlmeHalt(IN PRTMP_ADAPTER pAd)
        if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) {
                RTMP_CHIP_OP *pChipOps = &pAd->chipOps;
 
-               // Set LED
+               /* Set LED */
                RTMPSetLED(pAd, LED_HALT);
-               RTMPSetSignalLED(pAd, -100);    // Force signal strength Led to be turned off, firmware is not done it.
+               RTMPSetSignalLED(pAd, -100);    /* Force signal strength Led to be turned off, firmware is not done it. */
 #ifdef RTMP_MAC_USB
                {
                        LED_CFG_STRUC LedCfg;
@@ -625,13 +625,13 @@ VOID MlmeHalt(IN PRTMP_ADAPTER pAd)
                        LedCfg.field.YLedMode = 0;
                        RTMP_IO_WRITE32(pAd, LED_CFG, LedCfg.word);
                }
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
                if (pChipOps->AsicHaltAction)
                        pChipOps->AsicHaltAction(pAd);
        }
 
-       RTMPusecDelay(5000);    //  5 msec to gurantee Ant Diversity timer canceled
+       RTMPusecDelay(5000);    /*  5 msec to gurantee Ant Diversity timer canceled */
 
        MlmeQueueDestroy(&pAd->Mlme.Queue);
        NdisFreeSpinLock(&pAd->Mlme.TaskLock);
@@ -643,7 +643,7 @@ VOID MlmeResetRalinkCounters(IN PRTMP_ADAPTER pAd)
 {
        pAd->RalinkCounters.LastOneSecRxOkDataCnt =
            pAd->RalinkCounters.OneSecRxOkDataCnt;
-       // clear all OneSecxxx counters.
+       /* clear all OneSecxxx counters. */
        pAd->RalinkCounters.OneSecBeaconSentCnt = 0;
        pAd->RalinkCounters.OneSecFalseCCACnt = 0;
        pAd->RalinkCounters.OneSecRxFcsErrCnt = 0;
@@ -655,7 +655,7 @@ VOID MlmeResetRalinkCounters(IN PRTMP_ADAPTER pAd)
        pAd->RalinkCounters.OneSecReceivedByteCount = 0;
        pAd->RalinkCounters.OneSecTransmittedByteCount = 0;
 
-       // TODO: for debug only. to be removed
+       /* TODO: for debug only. to be removed */
        pAd->RalinkCounters.OneSecOsTxCount[QID_AC_BE] = 0;
        pAd->RalinkCounters.OneSecOsTxCount[QID_AC_BK] = 0;
        pAd->RalinkCounters.OneSecOsTxCount[QID_AC_VI] = 0;
@@ -688,7 +688,7 @@ VOID MlmeResetRalinkCounters(IN PRTMP_ADAPTER pAd)
 
        ==========================================================================
  */
-#define ADHOC_BEACON_LOST_TIME         (8*OS_HZ)       // 8 sec
+#define ADHOC_BEACON_LOST_TIME         (8*OS_HZ)       /* 8 sec */
 VOID MlmePeriodicExec(IN PVOID SystemSpecific1,
                      IN PVOID FunctionContext,
                      IN PVOID SystemSpecific2, IN PVOID SystemSpecific3)
@@ -698,8 +698,8 @@ VOID MlmePeriodicExec(IN PVOID SystemSpecific1,
 
 #ifdef RTMP_MAC_PCI
        {
-               // If Hardware controlled Radio enabled, we have to check GPIO pin2 every 2 second.
-               // Move code to here, because following code will return when radio is off
+               /* If Hardware controlled Radio enabled, we have to check GPIO pin2 every 2 second. */
+               /* Move code to here, because following code will return when radio is off */
                if ((pAd->Mlme.PeriodicRound % (MLME_TASK_EXEC_MULTIPLE * 2) ==
                     0) && (pAd->StaCfg.bHardwareRadio == TRUE)
                    && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))
@@ -708,27 +708,27 @@ VOID MlmePeriodicExec(IN PVOID SystemSpecific1,
                    ) {
                        UINT32 data = 0;
 
-                       // Read GPIO pin2 as Hardware controlled radio state
+                       /* Read GPIO pin2 as Hardware controlled radio state */
 #ifndef RT3090
                        RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &data);
-#endif // RT3090 //
-//KH(PCIE PS):Added based on Jane<--
+#endif /* RT3090 // */
+/*KH(PCIE PS):Added based on Jane<-- */
 #ifdef RT3090
-// Read GPIO pin2 as Hardware controlled radio state
-// We need to Read GPIO if HW said so no mater what advance power saving
+/* Read GPIO pin2 as Hardware controlled radio state */
+/* We need to Read GPIO if HW said so no mater what advance power saving */
                        if ((pAd->OpMode == OPMODE_STA) && (IDLE_ON(pAd))
                            &&
                            (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF))
                            && (pAd->StaCfg.PSControl.field.EnablePSinIdle ==
                                TRUE)) {
-                               // Want to make sure device goes to L0 state before reading register.
+                               /* Want to make sure device goes to L0 state before reading register. */
                                RTMPPCIeLinkCtrlValueRestore(pAd, 0);
                                RTMP_IO_FORCE_READ32(pAd, GPIO_CTRL_CFG, &data);
                                RTMPPCIeLinkCtrlSetting(pAd, 3);
                        } else
                                RTMP_IO_FORCE_READ32(pAd, GPIO_CTRL_CFG, &data);
-#endif // RT3090 //
-//KH(PCIE PS):Added based on Jane-->
+#endif /* RT3090 // */
+/*KH(PCIE PS):Added based on Jane--> */
 
                        if (data & 0x04) {
                                pAd->StaCfg.bHwRadio = TRUE;
@@ -741,20 +741,20 @@ VOID MlmePeriodicExec(IN PVOID SystemSpecific1,
                                                      && pAd->StaCfg.bSwRadio);
                                if (pAd->StaCfg.bRadio == TRUE) {
                                        MlmeRadioOn(pAd);
-                                       // Update extra information
+                                       /* Update extra information */
                                        pAd->ExtraInfo = EXTRA_INFO_CLEAR;
                                } else {
                                        MlmeRadioOff(pAd);
-                                       // Update extra information
+                                       /* Update extra information */
                                        pAd->ExtraInfo = HW_RADIO_OFF;
                                }
                        }
                }
        }
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
-       // Do nothing if the driver is starting halt state.
-       // This might happen when timer already been fired before cancel timer with mlmehalt
+       /* Do nothing if the driver is starting halt state. */
+       /* This might happen when timer already been fired before cancel timer with mlmehalt */
        if ((RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_HALT_IN_PROGRESS |
                                  fRTMP_ADAPTER_RADIO_OFF |
                                  fRTMP_ADAPTER_RADIO_MEASUREMENT |
@@ -764,12 +764,12 @@ VOID MlmePeriodicExec(IN PVOID SystemSpecific1,
        RTMP_MLME_PRE_SANITY_CHECK(pAd);
 
        {
-               // Do nothing if monitor mode is on
+               /* Do nothing if monitor mode is on */
                if (MONITOR_ON(pAd))
                        return;
 
                if (pAd->Mlme.PeriodicRound & 0x1) {
-                       // This is the fix for wifi 11n extension channel overlapping test case.  for 2860D
+                       /* This is the fix for wifi 11n extension channel overlapping test case.  for 2860D */
                        if (((pAd->MACVersion & 0xffff) == 0x0101) &&
                            (STA_TGN_WIFI_ON(pAd)) &&
                            (pAd->CommonCfg.IOTestParm.bToggle == FALSE))
@@ -786,20 +786,20 @@ VOID MlmePeriodicExec(IN PVOID SystemSpecific1,
 
        pAd->bUpdateBcnCntDone = FALSE;
 
-//      RECBATimerTimeout(SystemSpecific1,FunctionContext,SystemSpecific2,SystemSpecific3);
+/*      RECBATimerTimeout(SystemSpecific1,FunctionContext,SystemSpecific2,SystemSpecific3); */
        pAd->Mlme.PeriodicRound++;
 
 #ifdef RTMP_MAC_USB
-       // execute every 100ms, update the Tx FIFO Cnt for update Tx Rate.
+       /* execute every 100ms, update the Tx FIFO Cnt for update Tx Rate. */
        NICUpdateFifoStaCounters(pAd);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
-       // execute every 500ms
+       /* execute every 500ms */
        if ((pAd->Mlme.PeriodicRound % 5 == 0)
            && RTMPAutoRateSwitchCheck(pAd)
            /*(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED)) */ )
        {
-               // perform dynamic tx rate switching based on past TX history
+               /* perform dynamic tx rate switching based on past TX history */
                {
                        if ((OPSTATUS_TEST_FLAG
                             (pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)
@@ -808,13 +808,13 @@ VOID MlmePeriodicExec(IN PVOID SystemSpecific1,
                                MlmeDynamicTxRateSwitching(pAd);
                }
        }
-       // Normal 1 second Mlme PeriodicExec.
+       /* Normal 1 second Mlme PeriodicExec. */
        if (pAd->Mlme.PeriodicRound % MLME_TASK_EXEC_MULTIPLE == 0) {
                pAd->Mlme.OneSecPeriodicRound++;
 
-               //ORIBATimerTimeout(pAd);
+               /*ORIBATimerTimeout(pAd); */
 
-               // Media status changed, report to NDIS
+               /* Media status changed, report to NDIS */
                if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_MEDIA_STATE_CHANGE)) {
                        RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_MEDIA_STATE_CHANGE);
                        if (OPSTATUS_TEST_FLAG
@@ -832,26 +832,26 @@ VOID MlmePeriodicExec(IN PVOID SystemSpecific1,
 
                NdisGetSystemUpTime(&pAd->Mlme.Now32);
 
-               // add the most up-to-date h/w raw counters into software variable, so that
-               // the dynamic tuning mechanism below are based on most up-to-date information
+               /* add the most up-to-date h/w raw counters into software variable, so that */
+               /* the dynamic tuning mechanism below are based on most up-to-date information */
                NICUpdateRawCounters(pAd);
 
 #ifdef RTMP_MAC_USB
                RTUSBWatchDog(pAd);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
-               // Need statistics after read counter. So put after NICUpdateRawCounters
+               /* Need statistics after read counter. So put after NICUpdateRawCounters */
                ORIBATimerTimeout(pAd);
 
-               // if MGMT RING is full more than twice within 1 second, we consider there's
-               // a hardware problem stucking the TX path. In this case, try a hardware reset
-               // to recover the system
-               //      if (pAd->RalinkCounters.MgmtRingFullCount >= 2)
-               //              RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HARDWARE_ERROR);
-               //      else
-               //              pAd->RalinkCounters.MgmtRingFullCount = 0;
+               /* if MGMT RING is full more than twice within 1 second, we consider there's */
+               /* a hardware problem stucking the TX path. In this case, try a hardware reset */
+               /* to recover the system */
+               /*      if (pAd->RalinkCounters.MgmtRingFullCount >= 2) */
+               /*              RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HARDWARE_ERROR); */
+               /*      else */
+               /*              pAd->RalinkCounters.MgmtRingFullCount = 0; */
 
-               // The time period for checking antenna is according to traffic
+               /* The time period for checking antenna is according to traffic */
                {
                        if (pAd->Mlme.bEnableAutoAntennaCheck) {
                                TxTotalCnt =
@@ -859,7 +859,7 @@ VOID MlmePeriodicExec(IN PVOID SystemSpecific1,
                                    pAd->RalinkCounters.OneSecTxRetryOkCount +
                                    pAd->RalinkCounters.OneSecTxFailCount;
 
-                               // dynamic adjust antenna evaluation period according to the traffic
+                               /* dynamic adjust antenna evaluation period according to the traffic */
                                if (TxTotalCnt > 50) {
                                        if (pAd->Mlme.OneSecPeriodicRound %
                                            10 == 0) {
@@ -882,14 +882,14 @@ VOID MlmePeriodicExec(IN PVOID SystemSpecific1,
 #ifdef RTMP_MAC_PCI
                        if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)
                            && (pAd->bPCIclkOff == FALSE))
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
                        {
-                               // When Adhoc beacon is enabled and RTS/CTS is enabled, there is a chance that hardware MAC FSM will run into a deadlock
-                               // and sending CTS-to-self over and over.
-                               // Software Patch Solution:
-                               // 1. Polling debug state register 0x10F4 every one second.
-                               // 2. If in 0x10F4 the ((bit29==1) && (bit7==1)) OR ((bit29==1) && (bit5==1)), it means the deadlock has occurred.
-                               // 3. If the deadlock occurred, reset MAC/BBP by setting 0x1004 to 0x0001 for a while then setting it back to 0x000C again.
+                               /* When Adhoc beacon is enabled and RTS/CTS is enabled, there is a chance that hardware MAC FSM will run into a deadlock */
+                               /* and sending CTS-to-self over and over. */
+                               /* Software Patch Solution: */
+                               /* 1. Polling debug state register 0x10F4 every one second. */
+                               /* 2. If in 0x10F4 the ((bit29==1) && (bit7==1)) OR ((bit29==1) && (bit5==1)), it means the deadlock has occurred. */
+                               /* 3. If the deadlock occurred, reset MAC/BBP by setting 0x1004 to 0x0001 for a while then setting it back to 0x000C again. */
 
                                UINT32 MacReg = 0;
 
@@ -928,13 +928,13 @@ BOOLEAN MlmeValidateSSID(IN PUCHAR pSsid, IN UCHAR SsidLen)
        if (SsidLen > MAX_LEN_OF_SSID)
                return (FALSE);
 
-       // Check each character value
+       /* Check each character value */
        for (index = 0; index < SsidLen; index++) {
                if (pSsid[index] < 0x20)
                        return (FALSE);
        }
 
-       // All checked
+       /* All checked */
        return (TRUE);
 }
 
@@ -944,7 +944,7 @@ VOID MlmeSelectTxRateTable(IN PRTMP_ADAPTER pAd,
                           IN PUCHAR pTableSize, IN PUCHAR pInitTxRateIdx)
 {
        do {
-               // decide the rate table for tuning
+               /* decide the rate table for tuning */
                if (pAd->CommonCfg.TxRateTableSize > 0) {
                        *ppTable = RateSwitchTable;
                        *pTableSize = RateSwitchTable[0];
@@ -954,12 +954,12 @@ VOID MlmeSelectTxRateTable(IN PRTMP_ADAPTER pAd,
                }
 
                if ((pAd->OpMode == OPMODE_STA) && ADHOC_ON(pAd)) {
-                       if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) && (pEntry->HTCapability.MCSSet[0] == 0xff) && ((pEntry->HTCapability.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1))) {       // 11N 1S Adhoc
+                       if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) && (pEntry->HTCapability.MCSSet[0] == 0xff) && ((pEntry->HTCapability.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1))) {       /* 11N 1S Adhoc */
                                *ppTable = RateSwitchTable11N1S;
                                *pTableSize = RateSwitchTable11N1S[0];
                                *pInitTxRateIdx = RateSwitchTable11N1S[1];
 
-                       } else if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) && (pEntry->HTCapability.MCSSet[0] == 0xff) && (pEntry->HTCapability.MCSSet[1] == 0xff) && (pAd->Antenna.field.TxPath == 2)) {  // 11N 2S Adhoc
+                       } else if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) && (pEntry->HTCapability.MCSSet[0] == 0xff) && (pEntry->HTCapability.MCSSet[1] == 0xff) && (pAd->Antenna.field.TxPath == 2)) {  /* 11N 2S Adhoc */
                                if (pAd->LatchRfRegs.Channel <= 14) {
                                        *ppTable = RateSwitchTable11N2S;
                                        *pTableSize = RateSwitchTable11N2S[0];
@@ -994,18 +994,18 @@ VOID MlmeSelectTxRateTable(IN PRTMP_ADAPTER pAd,
                        }
                        break;
                }
-               //if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen == 12) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) &&
-               //      ((pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1)))
-               if (((pEntry->RateLen == 12) || (pAd->OpMode == OPMODE_STA)) && (pEntry->HTCapability.MCSSet[0] == 0xff) && ((pEntry->HTCapability.MCSSet[1] == 0x00) || (pAd->CommonCfg.TxStream == 1))) {     // 11BGN 1S AP
+               /*if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen == 12) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) && */
+               /*      ((pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1))) */
+               if (((pEntry->RateLen == 12) || (pAd->OpMode == OPMODE_STA)) && (pEntry->HTCapability.MCSSet[0] == 0xff) && ((pEntry->HTCapability.MCSSet[1] == 0x00) || (pAd->CommonCfg.TxStream == 1))) {     /* 11BGN 1S AP */
                        *ppTable = RateSwitchTable11BGN1S;
                        *pTableSize = RateSwitchTable11BGN1S[0];
                        *pInitTxRateIdx = RateSwitchTable11BGN1S[1];
 
                        break;
                }
-               //else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen == 12) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) &&
-               //      (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0xff) && (pAd->Antenna.field.TxPath == 2))
-               if (((pEntry->RateLen == 12) || (pAd->OpMode == OPMODE_STA)) && (pEntry->HTCapability.MCSSet[0] == 0xff) && (pEntry->HTCapability.MCSSet[1] == 0xff) && (pAd->CommonCfg.TxStream == 2)) {       // 11BGN 2S AP
+               /*else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen == 12) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) && */
+               /*      (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0xff) && (pAd->Antenna.field.TxPath == 2)) */
+               if (((pEntry->RateLen == 12) || (pAd->OpMode == OPMODE_STA)) && (pEntry->HTCapability.MCSSet[0] == 0xff) && (pEntry->HTCapability.MCSSet[1] == 0xff) && (pAd->CommonCfg.TxStream == 2)) {       /* 11BGN 2S AP */
                        if (pAd->LatchRfRegs.Channel <= 14) {
                                *ppTable = RateSwitchTable11BGN2S;
                                *pTableSize = RateSwitchTable11BGN2S[0];
@@ -1020,16 +1020,16 @@ VOID MlmeSelectTxRateTable(IN PRTMP_ADAPTER pAd,
                        }
                        break;
                }
-               //else if ((pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) && ((pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1)))
-               if ((pEntry->HTCapability.MCSSet[0] == 0xff) && ((pEntry->HTCapability.MCSSet[1] == 0x00) || (pAd->CommonCfg.TxStream == 1))) { // 11N 1S AP
+               /*else if ((pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) && ((pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1))) */
+               if ((pEntry->HTCapability.MCSSet[0] == 0xff) && ((pEntry->HTCapability.MCSSet[1] == 0x00) || (pAd->CommonCfg.TxStream == 1))) { /* 11N 1S AP */
                        *ppTable = RateSwitchTable11N1S;
                        *pTableSize = RateSwitchTable11N1S[0];
                        *pInitTxRateIdx = RateSwitchTable11N1S[1];
 
                        break;
                }
-               //else if ((pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0xff) && (pAd->Antenna.field.TxPath == 2))
-               if ((pEntry->HTCapability.MCSSet[0] == 0xff) && (pEntry->HTCapability.MCSSet[1] == 0xff) && (pAd->CommonCfg.TxStream == 2)) {   // 11N 2S AP
+               /*else if ((pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0xff) && (pAd->Antenna.field.TxPath == 2)) */
+               if ((pEntry->HTCapability.MCSSet[0] == 0xff) && (pEntry->HTCapability.MCSSet[1] == 0xff) && (pAd->CommonCfg.TxStream == 2)) {   /* 11N 2S AP */
                        if (pAd->LatchRfRegs.Channel <= 14) {
                                *ppTable = RateSwitchTable11N2S;
                                *pTableSize = RateSwitchTable11N2S[0];
@@ -1043,33 +1043,33 @@ VOID MlmeSelectTxRateTable(IN PRTMP_ADAPTER pAd,
 
                        break;
                }
-               //else if ((pAd->StaActive.SupRateLen == 4) && (pAd->StaActive.ExtRateLen == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
+               /*else if ((pAd->StaActive.SupRateLen == 4) && (pAd->StaActive.ExtRateLen == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0)) */
                if ((pEntry->RateLen == 4 || pAd->CommonCfg.PhyMode == PHY_11B)
-                   //Iverson mark for Adhoc b mode,sta will use rate 54  Mbps when connect with sta b/g/n mode
+                   /*Iverson mark for Adhoc b mode,sta will use rate 54  Mbps when connect with sta b/g/n mode */
                    /* && (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0) */
-                   ) {         // B only AP
+                   ) {         /* B only AP */
                        *ppTable = RateSwitchTable11B;
                        *pTableSize = RateSwitchTable11B[0];
                        *pInitTxRateIdx = RateSwitchTable11B[1];
 
                        break;
                }
-               //else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen > 8) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
+               /*else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen > 8) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0)) */
                if ((pEntry->RateLen > 8)
                    && (pEntry->HTCapability.MCSSet[0] == 0)
                    && (pEntry->HTCapability.MCSSet[1] == 0)
-                   ) {         // B/G  mixed AP
+                   ) {         /* B/G  mixed AP */
                        *ppTable = RateSwitchTable11BG;
                        *pTableSize = RateSwitchTable11BG[0];
                        *pInitTxRateIdx = RateSwitchTable11BG[1];
 
                        break;
                }
-               //else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen == 8) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
+               /*else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen == 8) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0)) */
                if ((pEntry->RateLen == 8)
                    && (pEntry->HTCapability.MCSSet[0] == 0)
                    && (pEntry->HTCapability.MCSSet[1] == 0)
-                   ) {         // G only AP
+                   ) {         /* G only AP */
                        *ppTable = RateSwitchTable11G;
                        *pTableSize = RateSwitchTable11G[0];
                        *pInitTxRateIdx = RateSwitchTable11G[1];
@@ -1078,8 +1078,8 @@ VOID MlmeSelectTxRateTable(IN PRTMP_ADAPTER pAd,
                }
 
                {
-                       //else if ((pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
-                       if ((pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)) {   // Legacy mode
+                       /*else if ((pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0)) */
+                       if ((pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)) {   /* Legacy mode */
                                if (pAd->CommonCfg.MaxTxRate <= RATE_11) {
                                        *ppTable = RateSwitchTable11B;
                                        *pTableSize = RateSwitchTable11B[0];
@@ -1154,11 +1154,11 @@ VOID STAMlmePeriodicExec(PRTMP_ADAPTER pAd)
           that ATE need are not collected via this routine.
         */
 #if defined(RT305x)||defined(RT3070)
-       // request by Gary, if Rssi0 > -42, BBP 82 need to be changed from 0x62 to 0x42, , bbp 67 need to be changed from 0x20 to 0x18
+       /* request by Gary, if Rssi0 > -42, BBP 82 need to be changed from 0x62 to 0x42, , bbp 67 need to be changed from 0x20 to 0x18 */
        if (!pAd->CommonCfg.HighPowerPatchDisabled) {
 #ifdef RT3070
                if ((IS_RT3070(pAd) && ((pAd->MACVersion & 0xffff) < 0x0201)))
-#endif // RT3070 //
+#endif /* RT3070 // */
                {
                        if ((pAd->StaCfg.RssiSample.AvgRssi0 != 0)
                            && (pAd->StaCfg.RssiSample.AvgRssi0 >
@@ -1171,8 +1171,8 @@ VOID STAMlmePeriodicExec(PRTMP_ADAPTER pAd)
        }
 #endif
 #ifdef PCIE_PS_SUPPORT
-// don't perform idle-power-save mechanism within 3 min after driver initialization.
-// This can make rebooter test more robust
+/* don't perform idle-power-save mechanism within 3 min after driver initialization. */
+/* This can make rebooter test more robust */
        if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_PCIE_DEVICE)) {
                if ((pAd->OpMode == OPMODE_STA) && (IDLE_ON(pAd))
                    && (pAd->Mlme.SyncMachine.CurrState == SYNC_IDLE)
@@ -1190,7 +1190,7 @@ VOID STAMlmePeriodicExec(PRTMP_ADAPTER pAd)
                                        AsicSendCommandToMcu(pAd, 0x30,
                                                             PowerSafeCID, 0xff,
                                                             0x2);
-                                       // Wait command success
+                                       /* Wait command success */
                                        AsicCheckCommanOk(pAd, PowerSafeCID);
                                        RTMP_SET_FLAG(pAd,
                                                      fRTMP_ADAPTER_IDLE_RADIO_OFF);
@@ -1209,7 +1209,7 @@ VOID STAMlmePeriodicExec(PRTMP_ADAPTER pAd)
                                        AsicSendCommandToMcu(pAd, 0x30,
                                                             PowerSafeCID, 0xff,
                                                             0x02);
-                                       // Wait command success
+                                       /* Wait command success */
                                        AsicCheckCommanOk(pAd, PowerSafeCID);
                                        RTMP_SET_FLAG(pAd,
                                                      fRTMP_ADAPTER_IDLE_RADIO_OFF);
@@ -1229,10 +1229,10 @@ VOID STAMlmePeriodicExec(PRTMP_ADAPTER pAd)
                                  pAd->MlmeAux.Ssid[2], pAd->MlmeAux.Ssid[3]));
                }
        }
-#endif // PCIE_PS_SUPPORT //
+#endif /* PCIE_PS_SUPPORT // */
 
        if (pAd->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_DISABLE) {
-               // WPA MIC error should block association attempt for 60 seconds
+               /* WPA MIC error should block association attempt for 60 seconds */
                if (pAd->StaCfg.bBlockAssoc &&
                    RTMP_TIME_AFTER(pAd->Mlme.Now32,
                                    pAd->StaCfg.LastMicErrorTime +
@@ -1260,18 +1260,18 @@ VOID STAMlmePeriodicExec(PRTMP_ADAPTER pAd)
            pAd->RalinkCounters.OneSecTxFailCount;
 
        if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)) {
-               // update channel quality for Roaming and UI LinkQuality display
+               /* update channel quality for Roaming and UI LinkQuality display */
                MlmeCalculateChannelQuality(pAd, NULL, pAd->Mlme.Now32);
        }
-       // must be AFTER MlmeDynamicTxRateSwitching() because it needs to know if
-       // Radio is currently in noisy environment
+       /* must be AFTER MlmeDynamicTxRateSwitching() because it needs to know if */
+       /* Radio is currently in noisy environment */
        if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
                AsicAdjustTxPower(pAd);
 
        if (INFRA_ON(pAd)) {
 
-               // Is PSM bit consistent with user power management policy?
-               // This is the only place that will set PSM bit ON.
+               /* Is PSM bit consistent with user power management policy? */
+               /* This is the only place that will set PSM bit ON. */
                if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
                        MlmeCheckPsmChange(pAd, pAd->Mlme.Now32);
 
@@ -1290,18 +1290,18 @@ VOID STAMlmePeriodicExec(PRTMP_ADAPTER pAd)
                                 ("MMCHK - No BEACON. restore R66 to the low bound(%d) \n",
                                  (0x2E + GET_LNA_GAIN(pAd))));
                }
-               //if ((pAd->RalinkCounters.OneSecTxNoRetryOkCount == 0) &&
-               //    (pAd->RalinkCounters.OneSecTxRetryOkCount == 0))
+               /*if ((pAd->RalinkCounters.OneSecTxNoRetryOkCount == 0) && */
+               /*    (pAd->RalinkCounters.OneSecTxRetryOkCount == 0)) */
                {
                        if (pAd->CommonCfg.bAPSDCapable
                            && pAd->CommonCfg.APEdcaParm.bAPSDCapable) {
-                               // When APSD is enabled, the period changes as 20 sec
+                               /* When APSD is enabled, the period changes as 20 sec */
                                if ((pAd->Mlme.OneSecPeriodicRound % 20) == 8)
                                        RTMPSendNullFrame(pAd,
                                                          pAd->CommonCfg.TxRate,
                                                          TRUE);
                        } else {
-                               // Send out a NULL frame every 10 sec to inform AP that STA is still alive (Avoid being age out)
+                               /* Send out a NULL frame every 10 sec to inform AP that STA is still alive (Avoid being age out) */
                                if ((pAd->Mlme.OneSecPeriodicRound % 10) == 8) {
                                        if (pAd->CommonCfg.bWmmCapable)
                                                RTMPSendNullFrame(pAd,
@@ -1323,13 +1323,13 @@ VOID STAMlmePeriodicExec(PRTMP_ADAPTER pAd)
                                 ("MMCHK - No BEACON. Dead CQI. Auto Recovery attempt #%ld\n",
                                  pAd->RalinkCounters.BadCQIAutoRecoveryCount));
 
-                       // Lost AP, send disconnect & link down event
+                       /* Lost AP, send disconnect & link down event */
                        LinkDown(pAd, FALSE);
 
                        RtmpOSWrielessEventSend(pAd, SIOCGIWAP, -1, NULL, NULL,
                                                0);
 
-                       // RTMPPatchMacBbpBug(pAd);
+                       /* RTMPPatchMacBbpBug(pAd); */
                        MlmeAutoReconnectLastSSID(pAd);
                } else if (CQI_IS_BAD(pAd->Mlme.ChannelQuality)) {
                        pAd->RalinkCounters.BadCQIAutoRecoveryCount++;
@@ -1350,7 +1350,7 @@ VOID STAMlmePeriodicExec(PRTMP_ADAPTER pAd)
                                                   pAd->StaCfg.RssiSample.
                                                   LastRssi2);
 
-                       // Scanning, ignore Roaming
+                       /* Scanning, ignore Roaming */
                        if (!RTMP_TEST_FLAG
                            (pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)
                            && (pAd->Mlme.SyncMachine.CurrState == SYNC_IDLE)
@@ -1359,7 +1359,7 @@ VOID STAMlmePeriodicExec(PRTMP_ADAPTER pAd)
                                         ("Rssi=%d, dBmToRoam=%d\n", MaxRssi,
                                          (CHAR) dBmToRoam));
 
-                               // Add auto seamless roaming
+                               /* Add auto seamless roaming */
                                if (rv == FALSE)
                                        rv = MlmeCheckForFastRoaming(pAd);
 
@@ -1377,9 +1377,9 @@ VOID STAMlmePeriodicExec(PRTMP_ADAPTER pAd)
                        }
                }
        } else if (ADHOC_ON(pAd)) {
-               // If all peers leave, and this STA becomes the last one in this IBSS, then change MediaState
-               // to DISCONNECTED. But still holding this IBSS (i.e. sending BEACON) so that other STAs can
-               // join later.
+               /* If all peers leave, and this STA becomes the last one in this IBSS, then change MediaState */
+               /* to DISCONNECTED. But still holding this IBSS (i.e. sending BEACON) so that other STAs can */
+               /* join later. */
                if (RTMP_TIME_AFTER
                    (pAd->Mlme.Now32,
                     pAd->StaCfg.LastBeaconRxTime + ADHOC_BEACON_LOST_TIME)
@@ -1411,7 +1411,7 @@ VOID STAMlmePeriodicExec(PRTMP_ADAPTER pAd)
                                MacTableDeleteEntry(pAd, pEntry->Aid,
                                                    pEntry->Addr);
                }
-       } else                  // no INFRA nor ADHOC connection
+       } else                  /* no INFRA nor ADHOC connection */
        {
 
                if (pAd->StaCfg.bScanReqIsFromWebUI &&
@@ -1451,10 +1451,10 @@ VOID STAMlmePeriodicExec(PRTMP_ADAPTER pAd)
                                                    &ScanReq);
                                        pAd->Mlme.CntlMachine.CurrState =
                                            CNTL_WAIT_OID_LIST_SCAN;
-                                       // Reset Missed scan number
+                                       /* Reset Missed scan number */
                                        pAd->StaCfg.LastScanTime =
                                            pAd->Mlme.Now32;
-                               } else if (pAd->StaCfg.BssType == BSS_ADHOC)    // Quit the forever scan when in a very clean room
+                               } else if (pAd->StaCfg.BssType == BSS_ADHOC)    /* Quit the forever scan when in a very clean room */
                                        MlmeAutoReconnectLastSSID(pAd);
                        } else if (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE) {
                                if ((pAd->Mlme.OneSecPeriodicRound % 7) == 0) {
@@ -1486,7 +1486,7 @@ SKIP_AUTO_SCAN_CONN:
        return;
 }
 
-// Link down report
+/* Link down report */
 VOID LinkDownExec(IN PVOID SystemSpecific1,
                  IN PVOID FunctionContext,
                  IN PVOID SystemSpecific2, IN PVOID SystemSpecific3)
@@ -1516,10 +1516,10 @@ VOID LinkDownExec(IN PVOID SystemSpecific1,
        }
 }
 
-// IRQL = DISPATCH_LEVEL
+/* IRQL = DISPATCH_LEVEL */
 VOID MlmeAutoScan(IN PRTMP_ADAPTER pAd)
 {
-       // check CntlMachine.CurrState to avoid collision with NDIS SetOID request
+       /* check CntlMachine.CurrState to avoid collision with NDIS SetOID request */
        if (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE) {
                DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - Driver auto scan\n"));
                MlmeEnqueue(pAd,
@@ -1531,7 +1531,7 @@ VOID MlmeAutoScan(IN PRTMP_ADAPTER pAd)
        }
 }
 
-// IRQL = DISPATCH_LEVEL
+/* IRQL = DISPATCH_LEVEL */
 VOID MlmeAutoReconnectLastSSID(IN PRTMP_ADAPTER pAd)
 {
        if (pAd->StaCfg.bAutoConnectByBssid) {
@@ -1550,7 +1550,7 @@ VOID MlmeAutoReconnectLastSSID(IN PRTMP_ADAPTER pAd)
 
                RTMP_MLME_HANDLER(pAd);
        }
-       // check CntlMachine.CurrState to avoid collision with NDIS SetOID request
+       /* check CntlMachine.CurrState to avoid collision with NDIS SetOID request */
        else if ((pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE) &&
                 (MlmeValidateSSID
                  (pAd->MlmeAux.AutoReconnectSsid,
@@ -1589,30 +1589,30 @@ VOID MlmeCheckForRoaming(IN PRTMP_ADAPTER pAd, IN ULONG Now32)
        BSS_ENTRY *pBss;
 
        DBGPRINT(RT_DEBUG_TRACE, ("==> MlmeCheckForRoaming\n"));
-       // put all roaming candidates into RoamTab, and sort in RSSI order
+       /* put all roaming candidates into RoamTab, and sort in RSSI order */
        BssTableInit(pRoamTab);
        for (i = 0; i < pAd->ScanTab.BssNr; i++) {
                pBss = &pAd->ScanTab.BssEntry[i];
 
                if ((pBss->LastBeaconRxTime + pAd->StaCfg.BeaconLostTime) <
                    Now32)
-                       continue;       // AP disappear
+                       continue;       /* AP disappear */
                if (pBss->Rssi <= RSSI_THRESHOLD_FOR_ROAMING)
-                       continue;       // RSSI too weak. forget it.
+                       continue;       /* RSSI too weak. forget it. */
                if (MAC_ADDR_EQUAL(pBss->Bssid, pAd->CommonCfg.Bssid))
-                       continue;       // skip current AP
+                       continue;       /* skip current AP */
                if (pBss->Rssi <
                    (pAd->StaCfg.RssiSample.LastRssi0 + RSSI_DELTA))
-                       continue;       // only AP with stronger RSSI is eligible for roaming
+                       continue;       /* only AP with stronger RSSI is eligible for roaming */
 
-               // AP passing all above rules is put into roaming candidate table
+               /* AP passing all above rules is put into roaming candidate table */
                NdisMoveMemory(&pRoamTab->BssEntry[pRoamTab->BssNr], pBss,
                               sizeof(BSS_ENTRY));
                pRoamTab->BssNr += 1;
        }
 
        if (pRoamTab->BssNr > 0) {
-               // check CntlMachine.CurrState to avoid collision with NDIS SetOID request
+               /* check CntlMachine.CurrState to avoid collision with NDIS SetOID request */
                if (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE) {
                        pAd->RalinkCounters.PoorCQIRoamingCount++;
                        DBGPRINT(RT_DEBUG_TRACE,
@@ -1647,26 +1647,26 @@ BOOLEAN MlmeCheckForFastRoaming(IN PRTMP_ADAPTER pAd)
        BSS_ENTRY *pBss;
 
        DBGPRINT(RT_DEBUG_TRACE, ("==> MlmeCheckForFastRoaming\n"));
-       // put all roaming candidates into RoamTab, and sort in RSSI order
+       /* put all roaming candidates into RoamTab, and sort in RSSI order */
        BssTableInit(pRoamTab);
        for (i = 0; i < pAd->ScanTab.BssNr; i++) {
                pBss = &pAd->ScanTab.BssEntry[i];
 
                if ((pBss->Rssi <= -50)
                    && (pBss->Channel == pAd->CommonCfg.Channel))
-                       continue;       // RSSI too weak. forget it.
+                       continue;       /* RSSI too weak. forget it. */
                if (MAC_ADDR_EQUAL(pBss->Bssid, pAd->CommonCfg.Bssid))
-                       continue;       // skip current AP
+                       continue;       /* skip current AP */
                if (!SSID_EQUAL
                    (pBss->Ssid, pBss->SsidLen, pAd->CommonCfg.Ssid,
                     pAd->CommonCfg.SsidLen))
-                       continue;       // skip different SSID
+                       continue;       /* skip different SSID */
                if (pBss->Rssi <
                    (RTMPMaxRssi
                     (pAd, pAd->StaCfg.RssiSample.LastRssi0,
                      pAd->StaCfg.RssiSample.LastRssi1,
                      pAd->StaCfg.RssiSample.LastRssi2) + RSSI_DELTA))
-                       continue;       // skip AP without better RSSI
+                       continue;       /* skip AP without better RSSI */
 
                DBGPRINT(RT_DEBUG_TRACE,
                         ("LastRssi0 = %d, pBss->Rssi = %d\n",
@@ -1674,7 +1674,7 @@ BOOLEAN MlmeCheckForFastRoaming(IN PRTMP_ADAPTER pAd)
                                      pAd->StaCfg.RssiSample.LastRssi1,
                                      pAd->StaCfg.RssiSample.LastRssi2),
                          pBss->Rssi));
-               // AP passing all above rules is put into roaming candidate table
+               /* AP passing all above rules is put into roaming candidate table */
                NdisMoveMemory(&pRoamTab->BssEntry[pRoamTab->BssNr], pBss,
                               sizeof(BSS_ENTRY));
                pRoamTab->BssNr += 1;
@@ -1683,7 +1683,7 @@ BOOLEAN MlmeCheckForFastRoaming(IN PRTMP_ADAPTER pAd)
        DBGPRINT(RT_DEBUG_TRACE,
                 ("<== MlmeCheckForFastRoaming (BssNr=%d)\n", pRoamTab->BssNr));
        if (pRoamTab->BssNr > 0) {
-               // check CntlMachine.CurrState to avoid collision with NDIS SetOID request
+               /* check CntlMachine.CurrState to avoid collision with NDIS SetOID request */
                if (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE) {
                        pAd->RalinkCounters.PoorCQIRoamingCount++;
                        DBGPRINT(RT_DEBUG_TRACE,
@@ -1719,19 +1719,19 @@ VOID MlmeSetTxRate(IN PRTMP_ADAPTER pAd,
                pAd->StaCfg.HTPhyMode.field.STBC = STBC_NONE;
 
        if (ADHOC_ON(pAd)) {
-               // If peer adhoc is b-only mode, we can't send 11g rate.
+               /* If peer adhoc is b-only mode, we can't send 11g rate. */
                pAd->StaCfg.HTPhyMode.field.ShortGI = GI_800;
                pEntry->HTPhyMode.field.STBC = STBC_NONE;
 
-               //
-               // For Adhoc MODE_CCK, driver will use AdhocBOnlyJoined flag to roll back to B only if necessary
-               //
+               /* */
+               /* For Adhoc MODE_CCK, driver will use AdhocBOnlyJoined flag to roll back to B only if necessary */
+               /* */
                pEntry->HTPhyMode.field.MODE = pTxRate->Mode;
                pEntry->HTPhyMode.field.ShortGI =
                    pAd->StaCfg.HTPhyMode.field.ShortGI;
                pEntry->HTPhyMode.field.MCS = pAd->StaCfg.HTPhyMode.field.MCS;
 
-               // Patch speed error in status page
+               /* Patch speed error in status page */
                pAd->StaCfg.HTPhyMode.field.MODE = pEntry->HTPhyMode.field.MODE;
        } else {
                if (pTxRate->Mode <= MaxMode)
@@ -1743,7 +1743,7 @@ VOID MlmeSetTxRate(IN PRTMP_ADAPTER pAd,
                else
                        pAd->StaCfg.HTPhyMode.field.ShortGI = GI_800;
 
-               // Reexam each bandwidth's SGI support.
+               /* Reexam each bandwidth's SGI support. */
                if (pAd->StaCfg.HTPhyMode.field.ShortGI == GI_400) {
                        if ((pEntry->HTPhyMode.field.BW == BW_20)
                            &&
@@ -1756,7 +1756,7 @@ VOID MlmeSetTxRate(IN PRTMP_ADAPTER pAd,
                             (pEntry, fCLIENT_STATUS_SGI40_CAPABLE)))
                                pAd->StaCfg.HTPhyMode.field.ShortGI = GI_800;
                }
-               // Turn RTS/CTS rate to 6Mbps.
+               /* Turn RTS/CTS rate to 6Mbps. */
                if ((pEntry->HTPhyMode.field.MCS == 0)
                    && (pAd->StaCfg.HTPhyMode.field.MCS != 0)) {
                        pEntry->HTPhyMode.field.MCS =
@@ -1857,13 +1857,13 @@ VOID MlmeDynamicTxRateSwitching(IN PRTMP_ADAPTER pAd)
        MAC_TABLE_ENTRY *pEntry;
        RSSI_SAMPLE *pRssi = &pAd->StaCfg.RssiSample;
 
-       //
-       // walk through MAC table, see if need to change AP's TX rate toward each entry
-       //
+       /* */
+       /* walk through MAC table, see if need to change AP's TX rate toward each entry */
+       /* */
        for (i = 1; i < MAX_LEN_OF_MAC_TABLE; i++) {
                pEntry = &pAd->MacTab.Content[i];
 
-               // check if this entry need to switch rate automatically
+               /* check if this entry need to switch rate automatically */
                if (RTMPCheckEntryEnableAutoRateSwitch(pAd, pEntry) == FALSE)
                        continue;
 
@@ -1872,7 +1872,7 @@ VOID MlmeDynamicTxRateSwitching(IN PRTMP_ADAPTER pAd)
                                           pRssi->AvgRssi0,
                                           pRssi->AvgRssi1, pRssi->AvgRssi2);
 
-                       // Update statistic counter
+                       /* Update statistic counter */
                        RTMP_IO_READ32(pAd, TX_STA_CNT0, &TxStaCnt0.word);
                        RTMP_IO_READ32(pAd, TX_STA_CNT1, &StaTx1.word);
                        pAd->bUpdateBcnCntDone = TRUE;
@@ -1894,9 +1894,9 @@ VOID MlmeDynamicTxRateSwitching(IN PRTMP_ADAPTER pAd)
                        pAd->WlanCounters.FailedCount.u.LowPart +=
                            TxStaCnt0.field.TxFailCount;
 
-                       // if no traffic in the past 1-sec period, don't change TX rate,
-                       // but clear all bad history. because the bad history may affect the next
-                       // Chariot throughput test
+                       /* if no traffic in the past 1-sec period, don't change TX rate, */
+                       /* but clear all bad history. because the bad history may affect the next */
+                       /* Chariot throughput test */
                        AccuTxTotalCnt =
                            pAd->RalinkCounters.OneSecTxNoRetryOkCount +
                            pAd->RalinkCounters.OneSecTxRetryOkCount +
@@ -1979,27 +1979,27 @@ VOID MlmeDynamicTxRateSwitching(IN PRTMP_ADAPTER pAd)
                if (CurrRateIdx >= TableSize) {
                        CurrRateIdx = TableSize - 1;
                }
-               // When switch from Fixed rate -> auto rate, the REAL TX rate might be different from pAd->CommonCfg.TxRateIndex.
-               // So need to sync here.
+               /* When switch from Fixed rate -> auto rate, the REAL TX rate might be different from pAd->CommonCfg.TxRateIndex. */
+               /* So need to sync here. */
                pCurrTxRate =
                    (PRTMP_TX_RATE_SWITCH) & pTable[(CurrRateIdx + 1) * 5];
                if ((pEntry->HTPhyMode.field.MCS != pCurrTxRate->CurrMCS)
-                   //&& (pAd->StaCfg.bAutoTxRateSwitch == TRUE)
+                   /*&& (pAd->StaCfg.bAutoTxRateSwitch == TRUE) */
                    ) {
 
-                       // Need to sync Real Tx rate and our record.
-                       // Then return for next DRS.
+                       /* Need to sync Real Tx rate and our record. */
+                       /* Then return for next DRS. */
                        pCurrTxRate =
                            (PRTMP_TX_RATE_SWITCH) & pTable[(InitTxRateIdx + 1)
                                                            * 5];
                        pEntry->CurrTxRateIndex = InitTxRateIdx;
                        MlmeSetTxRate(pAd, pEntry, pCurrTxRate);
 
-                       // reset all OneSecTx counters
+                       /* reset all OneSecTx counters */
                        RESET_ONE_SEC_TX_CNT(pEntry);
                        continue;
                }
-               // decide the next upgrade rate and downgrade rate, if any
+               /* decide the next upgrade rate and downgrade rate, if any */
                if ((CurrRateIdx > 0) && (CurrRateIdx < (TableSize - 1))) {
                        UpRateIdx = CurrRateIdx + 1;
                        DownRateIdx = CurrRateIdx - 1;
@@ -2026,27 +2026,27 @@ VOID MlmeDynamicTxRateSwitching(IN PRTMP_ADAPTER pAd)
                        TrainDown = pCurrTxRate->TrainDown;
                }
 
-               //pAd->DrsCounters.LastTimeTxRateChangeAction = pAd->DrsCounters.LastSecTxRateChangeAction;
+               /*pAd->DrsCounters.LastTimeTxRateChangeAction = pAd->DrsCounters.LastSecTxRateChangeAction; */
 
-               //
-               // Keep the last time TxRateChangeAction status.
-               //
+               /* */
+               /* Keep the last time TxRateChangeAction status. */
+               /* */
                pEntry->LastTimeTxRateChangeAction =
                    pEntry->LastSecTxRateChangeAction;
 
-               //
-               // CASE 1. when TX samples are fewer than 15, then decide TX rate solely on RSSI
-               //         (criteria copied from RT2500 for Netopia case)
-               //
+               /* */
+               /* CASE 1. when TX samples are fewer than 15, then decide TX rate solely on RSSI */
+               /*         (criteria copied from RT2500 for Netopia case) */
+               /* */
                if (TxTotalCnt <= 15) {
                        CHAR idx = 0;
                        UCHAR TxRateIdx;
                        UCHAR MCS0 = 0, MCS1 = 0, MCS2 = 0, MCS3 = 0, MCS4 =
                            0, MCS5 = 0, MCS6 = 0, MCS7 = 0;
                        UCHAR MCS12 = 0, MCS13 = 0, MCS14 = 0, MCS15 = 0;
-                       UCHAR MCS20 = 0, MCS21 = 0, MCS22 = 0, MCS23 = 0;       // 3*3
+                       UCHAR MCS20 = 0, MCS21 = 0, MCS22 = 0, MCS23 = 0;       /* 3*3 */
 
-                       // check the existence and index of each needed MCS
+                       /* check the existence and index of each needed MCS */
                        while (idx < pTable[0]) {
                                pCurrTxRate =
                                    (PRTMP_TX_RATE_SWITCH) & pTable[(idx + 1) *
@@ -2067,8 +2067,8 @@ VOID MlmeDynamicTxRateSwitching(IN PRTMP_ADAPTER pAd)
                                } else if (pCurrTxRate->CurrMCS == MCS_6) {
                                        MCS6 = idx;
                                }
-                               //else if (pCurrTxRate->CurrMCS == MCS_7)
-                               else if ((pCurrTxRate->CurrMCS == MCS_7) && (pCurrTxRate->ShortGI == GI_800))   // prevent the highest MCS using short GI when 1T and low throughput
+                               /*else if (pCurrTxRate->CurrMCS == MCS_7) */
+                               else if ((pCurrTxRate->CurrMCS == MCS_7) && (pCurrTxRate->ShortGI == GI_800))   /* prevent the highest MCS using short GI when 1T and low throughput */
                                {
                                        MCS7 = idx;
                                } else if (pCurrTxRate->CurrMCS == MCS_12) {
@@ -2078,11 +2078,10 @@ VOID MlmeDynamicTxRateSwitching(IN PRTMP_ADAPTER pAd)
                                } else if (pCurrTxRate->CurrMCS == MCS_14) {
                                        MCS14 = idx;
                                }
-                               //else if ((pCurrTxRate->CurrMCS == MCS_15)/* && (pCurrTxRate->ShortGI == GI_800)*/)    //we hope to use ShortGI as initial rate
-                               else if ((pCurrTxRate->CurrMCS == MCS_15) && (pCurrTxRate->ShortGI == GI_800))  //we hope to use ShortGI as initial rate, however Atheros's chip has bugs when short GI
+                               else if ((pCurrTxRate->CurrMCS == MCS_15) && (pCurrTxRate->ShortGI == GI_800))  /*we hope to use ShortGI as initial rate, however Atheros's chip has bugs when short GI */
                                {
                                        MCS15 = idx;
-                               } else if (pCurrTxRate->CurrMCS == MCS_20)      // 3*3
+                               } else if (pCurrTxRate->CurrMCS == MCS_20)      /* 3*3 */
                                {
                                        MCS20 = idx;
                                } else if (pCurrTxRate->CurrMCS == MCS_21) {
@@ -2110,7 +2109,7 @@ VOID MlmeDynamicTxRateSwitching(IN PRTMP_ADAPTER pAd)
                        }
 
                        /*if (MCS15) */
-                       if ((pTable == RateSwitchTable11BGN3S) || (pTable == RateSwitchTable11N3S) || (pTable == RateSwitchTable)) {    // N mode with 3 stream // 3*3
+                       if ((pTable == RateSwitchTable11BGN3S) || (pTable == RateSwitchTable11N3S) || (pTable == RateSwitchTable)) {    /* N mode with 3 stream // 3*3 */
                                if (MCS23 && (Rssi >= -70))
                                        TxRateIdx = MCS23;
                                else if (MCS22 && (Rssi >= -72))
@@ -2130,9 +2129,9 @@ VOID MlmeDynamicTxRateSwitching(IN PRTMP_ADAPTER pAd)
                                else
                                        TxRateIdx = MCS0;
                        }
-//              else if ((pTable == RateSwitchTable11BGN2S) || (pTable == RateSwitchTable11BGN2SForABand) ||(pTable == RateSwitchTable11N2S) ||(pTable == RateSwitchTable11N2SForABand) || (pTable == RateSwitchTable))
-                       else if ((pTable == RateSwitchTable11BGN2S) || (pTable == RateSwitchTable11BGN2SForABand) || (pTable == RateSwitchTable11N2S) || (pTable == RateSwitchTable11N2SForABand))      // 3*3
-                       {       // N mode with 2 stream
+/*              else if ((pTable == RateSwitchTable11BGN2S) || (pTable == RateSwitchTable11BGN2SForABand) ||(pTable == RateSwitchTable11N2S) ||(pTable == RateSwitchTable11N2SForABand) || (pTable == RateSwitchTable)) */
+                       else if ((pTable == RateSwitchTable11BGN2S) || (pTable == RateSwitchTable11BGN2SForABand) || (pTable == RateSwitchTable11N2S) || (pTable == RateSwitchTable11N2SForABand))      /* 3*3 */
+                       {       /* N mode with 2 stream */
                                if (MCS15 && (Rssi >= (-70 + RssiOffset)))
                                        TxRateIdx = MCS15;
                                else if (MCS14 && (Rssi >= (-72 + RssiOffset)))
@@ -2151,7 +2150,7 @@ VOID MlmeDynamicTxRateSwitching(IN PRTMP_ADAPTER pAd)
                                        TxRateIdx = MCS1;
                                else
                                        TxRateIdx = MCS0;
-                       } else if ((pTable == RateSwitchTable11BGN1S) || (pTable == RateSwitchTable11N1S)) {    // N mode with 1 stream
+                       } else if ((pTable == RateSwitchTable11BGN1S) || (pTable == RateSwitchTable11N1S)) {    /* N mode with 1 stream */
                                if (MCS7 && (Rssi > (-72 + RssiOffset)))
                                        TxRateIdx = MCS7;
                                else if (MCS6 && (Rssi > (-74 + RssiOffset)))
@@ -2168,7 +2167,7 @@ VOID MlmeDynamicTxRateSwitching(IN PRTMP_ADAPTER pAd)
                                        TxRateIdx = MCS1;
                                else
                                        TxRateIdx = MCS0;
-                       } else {        // Legacy mode
+                       } else {        /* Legacy mode */
                                if (MCS7 && (Rssi > -70))
                                        TxRateIdx = MCS7;
                                else if (MCS6 && (Rssi > -74))
@@ -2177,7 +2176,7 @@ VOID MlmeDynamicTxRateSwitching(IN PRTMP_ADAPTER pAd)
                                        TxRateIdx = MCS5;
                                else if (MCS4 && (Rssi > -82))
                                        TxRateIdx = MCS4;
-                               else if (MCS4 == 0)     // for B-only mode
+                               else if (MCS4 == 0)     /* for B-only mode */
                                        TxRateIdx = MCS3;
                                else if (MCS3 && (Rssi > -85))
                                        TxRateIdx = MCS3;
@@ -2189,7 +2188,7 @@ VOID MlmeDynamicTxRateSwitching(IN PRTMP_ADAPTER pAd)
                                        TxRateIdx = MCS0;
                        }
 
-                       //              if (TxRateIdx != pAd->CommonCfg.TxRateIndex)
+                       /*              if (TxRateIdx != pAd->CommonCfg.TxRateIndex) */
                        {
                                pEntry->CurrTxRateIndex = TxRateIdx;
                                pNextTxRate =
@@ -2205,7 +2204,7 @@ VOID MlmeDynamicTxRateSwitching(IN PRTMP_ADAPTER pAd)
                                       sizeof(UCHAR) *
                                       MAX_STEP_OF_TX_RATE_SWITCH);
                        pEntry->fLastSecAccordingRSSI = TRUE;
-                       // reset all OneSecTx counters
+                       /* reset all OneSecTx counters */
                        RESET_ONE_SEC_TX_CNT(pEntry);
 
                        continue;
@@ -2214,7 +2213,7 @@ VOID MlmeDynamicTxRateSwitching(IN PRTMP_ADAPTER pAd)
                if (pEntry->fLastSecAccordingRSSI == TRUE) {
                        pEntry->fLastSecAccordingRSSI = FALSE;
                        pEntry->LastSecTxRateChangeAction = 0;
-                       // reset all OneSecTx counters
+                       /* reset all OneSecTx counters */
                        RESET_ONE_SEC_TX_CNT(pEntry);
 
                        continue;
@@ -2225,29 +2224,29 @@ VOID MlmeDynamicTxRateSwitching(IN PRTMP_ADAPTER pAd)
 
                        pEntry->CurrTxRateStableTime++;
 
-                       // downgrade TX quality if PER >= Rate-Down threshold
+                       /* downgrade TX quality if PER >= Rate-Down threshold */
                        if (TxErrorRatio >= TrainDown) {
                                bTrainUpDown = TRUE;
                                pEntry->TxQuality[CurrRateIdx] =
                                    DRS_TX_QUALITY_WORST_BOUND;
                        }
-                       // upgrade TX quality if PER <= Rate-Up threshold
+                       /* upgrade TX quality if PER <= Rate-Up threshold */
                        else if (TxErrorRatio <= TrainUp) {
                                bTrainUpDown = TRUE;
                                bUpgradeQuality = TRUE;
                                if (pEntry->TxQuality[CurrRateIdx])
-                                       pEntry->TxQuality[CurrRateIdx]--;       // quality very good in CurrRate
+                                       pEntry->TxQuality[CurrRateIdx]--;       /* quality very good in CurrRate */
 
                                if (pEntry->TxRateUpPenalty)
                                        pEntry->TxRateUpPenalty--;
                                else if (pEntry->TxQuality[UpRateIdx])
-                                       pEntry->TxQuality[UpRateIdx]--; // may improve next UP rate's quality
+                                       pEntry->TxQuality[UpRateIdx]--; /* may improve next UP rate's quality */
                        }
 
                        pEntry->PER[CurrRateIdx] = (UCHAR) TxErrorRatio;
 
                        if (bTrainUpDown) {
-                               // perform DRS - consider TxRate Down first, then rate up.
+                               /* perform DRS - consider TxRate Down first, then rate up. */
                                if ((CurrRateIdx != DownRateIdx)
                                    && (pEntry->TxQuality[CurrRateIdx] >=
                                        DRS_TX_QUALITY_WORST_BOUND)) {
@@ -2260,11 +2259,11 @@ VOID MlmeDynamicTxRateSwitching(IN PRTMP_ADAPTER pAd)
                        }
                } while (FALSE);
 
-               // if rate-up happen, clear all bad history of all TX rates
+               /* if rate-up happen, clear all bad history of all TX rates */
                if (pEntry->CurrTxRateIndex > CurrRateIdx) {
                        pEntry->CurrTxRateStableTime = 0;
                        pEntry->TxRateUpPenalty = 0;
-                       pEntry->LastSecTxRateChangeAction = 1;  // rate UP
+                       pEntry->LastSecTxRateChangeAction = 1;  /* rate UP */
                        NdisZeroMemory(pEntry->TxQuality,
                                       sizeof(USHORT) *
                                       MAX_STEP_OF_TX_RATE_SWITCH);
@@ -2272,9 +2271,9 @@ VOID MlmeDynamicTxRateSwitching(IN PRTMP_ADAPTER pAd)
                                       sizeof(UCHAR) *
                                       MAX_STEP_OF_TX_RATE_SWITCH);
 
-                       //
-                       // For TxRate fast train up
-                       //
+                       /* */
+                       /* For TxRate fast train up */
+                       /* */
                        if (!pAd->StaCfg.StaQuickResponeForRateUpTimerRunning) {
                                RTMPSetTimer(&pAd->StaCfg.
                                             StaQuickResponeForRateUpTimer,
@@ -2285,17 +2284,17 @@ VOID MlmeDynamicTxRateSwitching(IN PRTMP_ADAPTER pAd)
                        }
                        bTxRateChanged = TRUE;
                }
-               // if rate-down happen, only clear DownRate's bad history
+               /* if rate-down happen, only clear DownRate's bad history */
                else if (pEntry->CurrTxRateIndex < CurrRateIdx) {
                        pEntry->CurrTxRateStableTime = 0;
-                       pEntry->TxRateUpPenalty = 0;    // no penalty
-                       pEntry->LastSecTxRateChangeAction = 2;  // rate DOWN
+                       pEntry->TxRateUpPenalty = 0;    /* no penalty */
+                       pEntry->LastSecTxRateChangeAction = 2;  /* rate DOWN */
                        pEntry->TxQuality[pEntry->CurrTxRateIndex] = 0;
                        pEntry->PER[pEntry->CurrTxRateIndex] = 0;
 
-                       //
-                       // For TxRate fast train down
-                       //
+                       /* */
+                       /* For TxRate fast train down */
+                       /* */
                        if (!pAd->StaCfg.StaQuickResponeForRateUpTimerRunning) {
                                RTMPSetTimer(&pAd->StaCfg.
                                             StaQuickResponeForRateUpTimer,
@@ -2306,7 +2305,7 @@ VOID MlmeDynamicTxRateSwitching(IN PRTMP_ADAPTER pAd)
                        }
                        bTxRateChanged = TRUE;
                } else {
-                       pEntry->LastSecTxRateChangeAction = 0;  // rate no change
+                       pEntry->LastSecTxRateChangeAction = 0;  /* rate no change */
                        bTxRateChanged = FALSE;
                }
 
@@ -2314,7 +2313,7 @@ VOID MlmeDynamicTxRateSwitching(IN PRTMP_ADAPTER pAd)
                {
                        UCHAR tmpTxRate;
 
-                       // to fix tcp ack issue
+                       /* to fix tcp ack issue */
                        if (!bTxRateChanged
                            && (pAd->RalinkCounters.OneSecReceivedByteCount >
                                (pAd->RalinkCounters.
@@ -2339,7 +2338,7 @@ VOID MlmeDynamicTxRateSwitching(IN PRTMP_ADAPTER pAd)
                if (bTxRateChanged && pNextTxRate) {
                        MlmeSetTxRate(pAd, pEntry, pNextTxRate);
                }
-               // reset all OneSecTx counters
+               /* reset all OneSecTx counters */
                RESET_ONE_SEC_TX_CNT(pEntry);
        }
 }
@@ -2369,7 +2368,7 @@ VOID StaQuickResponeForRateUpExec(IN PVOID SystemSpecific1,
        UCHAR UpRateIdx = 0, DownRateIdx = 0, CurrRateIdx = 0;
        ULONG TxTotalCnt;
        ULONG TxErrorRatio = 0;
-       BOOLEAN bTxRateChanged; //, bUpgradeQuality = FALSE;
+       BOOLEAN bTxRateChanged; /*, bUpgradeQuality = FALSE; */
        PRTMP_TX_RATE_SWITCH pCurrTxRate, pNextTxRate = NULL;
        PUCHAR pTable;
        UCHAR TableSize = 0;
@@ -2383,13 +2382,13 @@ VOID StaQuickResponeForRateUpExec(IN PVOID SystemSpecific1,
 
        pAd->StaCfg.StaQuickResponeForRateUpTimerRunning = FALSE;
 
-       //
-       // walk through MAC table, see if need to change AP's TX rate toward each entry
-       //
+       /* */
+       /* walk through MAC table, see if need to change AP's TX rate toward each entry */
+       /* */
        for (i = 1; i < MAX_LEN_OF_MAC_TABLE; i++) {
                pEntry = &pAd->MacTab.Content[i];
 
-               // check if this entry need to switch rate automatically
+               /* check if this entry need to switch rate automatically */
                if (RTMPCheckEntryEnableAutoRateSwitch(pAd, pEntry) == FALSE)
                        continue;
 
@@ -2409,7 +2408,7 @@ VOID StaQuickResponeForRateUpExec(IN PVOID SystemSpecific1,
                MlmeSelectTxRateTable(pAd, pEntry, &pTable, &TableSize,
                                      &InitTxRateIdx);
 
-               // decide the next upgrade rate and downgrade rate, if any
+               /* decide the next upgrade rate and downgrade rate, if any */
                if ((CurrRateIdx > 0) && (CurrRateIdx < (TableSize - 1))) {
                        UpRateIdx = CurrRateIdx + 1;
                        DownRateIdx = CurrRateIdx - 1;
@@ -2437,7 +2436,7 @@ VOID StaQuickResponeForRateUpExec(IN PVOID SystemSpecific1,
                }
 
                if (pAd->MacTab.Size == 1) {
-                       // Update statistic counter
+                       /* Update statistic counter */
                        RTMP_IO_READ32(pAd, TX_STA_CNT0, &TxStaCnt0.word);
                        RTMP_IO_READ32(pAd, TX_STA_CNT1, &StaTx1.word);
 
@@ -2475,10 +2474,10 @@ VOID StaQuickResponeForRateUpExec(IN PVOID SystemSpecific1,
                                    TxTotalCnt;
                }
 
-               //
-               // CASE 1. when TX samples are fewer than 15, then decide TX rate solely on RSSI
-               //         (criteria copied from RT2500 for Netopia case)
-               //
+               /* */
+               /* CASE 1. when TX samples are fewer than 15, then decide TX rate solely on RSSI */
+               /*         (criteria copied from RT2500 for Netopia case) */
+               /* */
                if (TxTotalCnt <= 12) {
                        NdisZeroMemory(pAd->DrsCounters.TxQuality,
                                       sizeof(USHORT) *
@@ -2511,7 +2510,7 @@ VOID StaQuickResponeForRateUpExec(IN PVOID SystemSpecific1,
                        else
                                ratio = 4;
 
-                       // downgrade TX quality if PER >= Rate-Down threshold
+                       /* downgrade TX quality if PER >= Rate-Down threshold */
                        if (TxErrorRatio >= TrainDown) {
                                pAd->DrsCounters.TxQuality[CurrRateIdx] =
                                    DRS_TX_QUALITY_WORST_BOUND;
@@ -2522,7 +2521,7 @@ VOID StaQuickResponeForRateUpExec(IN PVOID SystemSpecific1,
 
                        OneSecTxNoRetryOKRationCount = (TxSuccess * ratio);
 
-                       // perform DRS - consider TxRate Down first, then rate up.
+                       /* perform DRS - consider TxRate Down first, then rate up. */
                        if ((pAd->DrsCounters.LastSecTxRateChangeAction == 1)
                            && (CurrRateIdx != DownRateIdx)) {
                                if ((pAd->DrsCounters.LastTxOkCount + 2) >=
@@ -2548,7 +2547,7 @@ VOID StaQuickResponeForRateUpExec(IN PVOID SystemSpecific1,
                        }
                } while (FALSE);
 
-               // if rate-up happen, clear all bad history of all TX rates
+               /* if rate-up happen, clear all bad history of all TX rates */
                if (pAd->CommonCfg.TxRateIndex > CurrRateIdx) {
                        pAd->DrsCounters.TxRateUpPenalty = 0;
                        NdisZeroMemory(pAd->DrsCounters.TxQuality,
@@ -2559,13 +2558,13 @@ VOID StaQuickResponeForRateUpExec(IN PVOID SystemSpecific1,
                                       MAX_STEP_OF_TX_RATE_SWITCH);
                        bTxRateChanged = TRUE;
                }
-               // if rate-down happen, only clear DownRate's bad history
+               /* if rate-down happen, only clear DownRate's bad history */
                else if (pAd->CommonCfg.TxRateIndex < CurrRateIdx) {
                        DBGPRINT_RAW(RT_DEBUG_TRACE,
                                     ("QuickDRS: --TX rate from %d to %d \n",
                                      CurrRateIdx, pAd->CommonCfg.TxRateIndex));
 
-                       pAd->DrsCounters.TxRateUpPenalty = 0;   // no penalty
+                       pAd->DrsCounters.TxRateUpPenalty = 0;   /* no penalty */
                        pAd->DrsCounters.TxQuality[pAd->CommonCfg.TxRateIndex] =
                            0;
                        pAd->DrsCounters.PER[pAd->CommonCfg.TxRateIndex] = 0;
@@ -2606,18 +2605,18 @@ VOID MlmeCheckPsmChange(IN PRTMP_ADAPTER pAd, IN ULONG Now32)
 {
        ULONG PowerMode;
 
-       // condition -
-       // 1. Psm maybe ON only happen in INFRASTRUCTURE mode
-       // 2. user wants either MAX_PSP or FAST_PSP
-       // 3. but current psm is not in PWR_SAVE
-       // 4. CNTL state machine is not doing SCANning
-       // 5. no TX SUCCESS event for the past 1-sec period
+       /* condition - */
+       /* 1. Psm maybe ON only happen in INFRASTRUCTURE mode */
+       /* 2. user wants either MAX_PSP or FAST_PSP */
+       /* 3. but current psm is not in PWR_SAVE */
+       /* 4. CNTL state machine is not doing SCANning */
+       /* 5. no TX SUCCESS event for the past 1-sec period */
        PowerMode = pAd->StaCfg.WindowsPowerMode;
 
        if (INFRA_ON(pAd) &&
            (PowerMode != Ndis802_11PowerModeCAM) &&
            (pAd->StaCfg.Psm == PWR_ACTIVE) &&
-//              (! RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
+/*              (! RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) */
            (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE) &&
            RTMP_TEST_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP)
            /*&&
@@ -2637,8 +2636,8 @@ VOID MlmeCheckPsmChange(IN PRTMP_ADAPTER pAd, IN ULONG Now32)
        }
 }
 
-// IRQL = PASSIVE_LEVEL
-// IRQL = DISPATCH_LEVEL
+/* IRQL = PASSIVE_LEVEL */
+/* IRQL = DISPATCH_LEVEL */
 VOID MlmeSetPsmBit(IN PRTMP_ADAPTER pAd, IN USHORT psm)
 {
        AUTO_RSP_CFG_STRUC csr4;
@@ -2683,7 +2682,7 @@ VOID MlmeCalculateChannelQuality(IN PRTMP_ADAPTER pAd,
        UINT32 OneSecTxFailCount = 0;
        UINT32 OneSecRxOkCnt = 0;
        UINT32 OneSecRxFcsErrCnt = 0;
-       ULONG ChannelQuality = 0;       // 0..100, Channel Quality Indication for Roaming
+       ULONG ChannelQuality = 0;       /* 0..100, Channel Quality Indication for Roaming */
        ULONG BeaconLostTime = pAd->StaCfg.BeaconLostTime;
 
        if (pAd->OpMode == OPMODE_STA) {
@@ -2699,9 +2698,9 @@ VOID MlmeCalculateChannelQuality(IN PRTMP_ADAPTER pAd,
        MaxRssi = RTMPMaxRssi(pAd, pRssiSample->LastRssi0,
                              pRssiSample->LastRssi1, pRssiSample->LastRssi2);
 
-       //
-       // calculate TX packet error ratio and TX retry ratio - if too few TX samples, skip TX related statistics
-       //
+       /* */
+       /* calculate TX packet error ratio and TX retry ratio - if too few TX samples, skip TX related statistics */
+       /* */
        TxOkCnt = OneSecTxNoRetryOkCount + OneSecTxRetryOkCount;
        TxCnt = TxOkCnt + OneSecTxFailCount;
        if (TxCnt < 5) {
@@ -2712,26 +2711,26 @@ VOID MlmeCalculateChannelQuality(IN PRTMP_ADAPTER pAd,
                TxPRR = ((TxCnt - OneSecTxNoRetryOkCount) * 100) / TxCnt;
        }
 
-       //
-       // calculate RX PER - don't take RxPER into consideration if too few sample
-       //
+       /* */
+       /* calculate RX PER - don't take RxPER into consideration if too few sample */
+       /* */
        RxCnt = OneSecRxOkCnt + OneSecRxFcsErrCnt;
        if (RxCnt < 5)
                RxPER = 0;
        else
                RxPER = (OneSecRxFcsErrCnt * 100) / RxCnt;
 
-       //
-       // decide ChannelQuality based on: 1)last BEACON received time, 2)last RSSI, 3)TxPER, and 4)RxPER
-       //
-       if ((pAd->OpMode == OPMODE_STA) && INFRA_ON(pAd) && (OneSecTxNoRetryOkCount < 2) &&     // no heavy traffic
+       /* */
+       /* decide ChannelQuality based on: 1)last BEACON received time, 2)last RSSI, 3)TxPER, and 4)RxPER */
+       /* */
+       if ((pAd->OpMode == OPMODE_STA) && INFRA_ON(pAd) && (OneSecTxNoRetryOkCount < 2) &&     /* no heavy traffic */
            ((pAd->StaCfg.LastBeaconRxTime + BeaconLostTime) < Now32)) {
                DBGPRINT(RT_DEBUG_TRACE,
                         ("BEACON lost > %ld msec with TxOkCnt=%ld -> CQI=0\n",
                          BeaconLostTime, TxOkCnt));
                ChannelQuality = 0;
        } else {
-               // Normalize Rssi
+               /* Normalize Rssi */
                if (MaxRssi > -40)
                        NorRssi = 100;
                else if (MaxRssi < -90)
@@ -2739,7 +2738,7 @@ VOID MlmeCalculateChannelQuality(IN PRTMP_ADAPTER pAd,
                else
                        NorRssi = (MaxRssi + 90) * 2;
 
-               // ChannelQuality = W1*RSSI + W2*TxPRR + W3*RxPER        (RSSI 0..100), (TxPER 100..0), (RxPER 100..0)
+               /* ChannelQuality = W1*RSSI + W2*TxPRR + W3*RxPER        (RSSI 0..100), (TxPER 100..0), (RxPER 100..0) */
                ChannelQuality = (RSSI_WEIGHTING * NorRssi +
                                  TX_WEIGHTING * (100 - TxPRR) +
                                  RX_WEIGHTING * (100 - RxPER)) / 100;
@@ -2751,16 +2750,16 @@ VOID MlmeCalculateChannelQuality(IN PRTMP_ADAPTER pAd,
 
 }
 
-// IRQL = DISPATCH_LEVEL
+/* IRQL = DISPATCH_LEVEL */
 VOID MlmeSetTxPreamble(IN PRTMP_ADAPTER pAd, IN USHORT TxPreamble)
 {
        AUTO_RSP_CFG_STRUC csr4;
 
-       //
-       // Always use Long preamble before verifiation short preamble functionality works well.
-       // Todo: remove the following line if short preamble functionality works
-       //
-       //TxPreamble = Rt802_11PreambleLong;
+       /* */
+       /* Always use Long preamble before verifiation short preamble functionality works well. */
+       /* Todo: remove the following line if short preamble functionality works */
+       /* */
+       /*TxPreamble = Rt802_11PreambleLong; */
 
        RTMP_IO_READ32(pAd, AUTO_RSP_CFG, &csr4.word);
        if (TxPreamble == Rt802_11PreambleLong) {
@@ -2769,7 +2768,7 @@ VOID MlmeSetTxPreamble(IN PRTMP_ADAPTER pAd, IN USHORT TxPreamble)
                OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);
                csr4.field.AutoResponderPreamble = 0;
        } else {
-               // NOTE: 1Mbps should always use long preamble
+               /* NOTE: 1Mbps should always use long preamble */
                DBGPRINT(RT_DEBUG_TRACE,
                         ("MlmeSetTxPreamble (= SHORT PREAMBLE)\n"));
                OPSTATUS_SET_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);
@@ -2796,7 +2795,7 @@ VOID UpdateBasicRateBitmap(IN PRTMP_ADAPTER pAdapter)
        ULONG bitmap = pAdapter->CommonCfg.BasicRateBitmap;
 
        /* if A mode, always use fix BasicRateBitMap */
-       //if (pAdapter->CommonCfg.Channel == PHY_11A)
+       /*if (pAdapter->CommonCfg.Channel == PHY_11A) */
        if (pAdapter->CommonCfg.Channel > 14)
                pAdapter->CommonCfg.BasicRateBitmap = 0x150;    /* 6, 12, 24M */
        /* End of if */
@@ -2828,10 +2827,10 @@ VOID UpdateBasicRateBitmap(IN PRTMP_ADAPTER pAdapter)
        }                       /* End of for */
 }                              /* End of UpdateBasicRateBitmap */
 
-// IRQL = PASSIVE_LEVEL
-// IRQL = DISPATCH_LEVEL
-// bLinkUp is to identify the inital link speed.
-// TRUE indicates the rate update at linkup, we should not try to set the rate at 54Mbps.
+/* IRQL = PASSIVE_LEVEL */
+/* IRQL = DISPATCH_LEVEL */
+/* bLinkUp is to identify the inital link speed. */
+/* TRUE indicates the rate update at linkup, we should not try to set the rate at 54Mbps. */
 VOID MlmeUpdateTxRates(IN PRTMP_ADAPTER pAd, IN BOOLEAN bLinkUp, IN UCHAR apidx)
 {
        int i, num;
@@ -2846,7 +2845,7 @@ VOID MlmeUpdateTxRates(IN PRTMP_ADAPTER pAd, IN BOOLEAN bLinkUp, IN UCHAR apidx)
        BOOLEAN *auto_rate_cur_p;
        UCHAR HtMcs = MCS_AUTO;
 
-       // find max desired rate
+       /* find max desired rate */
        UpdateBasicRateBitmap(pAd);
 
        num = 0;
@@ -2901,14 +2900,14 @@ VOID MlmeUpdateTxRates(IN PRTMP_ADAPTER pAd, IN BOOLEAN bLinkUp, IN UCHAR apidx)
                        Rate = RATE_54;
                        num++;
                        break;
-                       //default: Rate = RATE_1;   break;
+                       /*default: Rate = RATE_1;   break; */
                }
                if (MaxDesire < Rate)
                        MaxDesire = Rate;
        }
 
-//===========================================================================
-//===========================================================================
+/*=========================================================================== */
+/*=========================================================================== */
        {
                pHtPhy = &pAd->StaCfg.HTPhyMode;
                pMaxHtPhy = &pAd->StaCfg.MaxHTPhyMode;
@@ -2929,25 +2928,25 @@ VOID MlmeUpdateTxRates(IN PRTMP_ADAPTER pAd, IN BOOLEAN bLinkUp, IN UCHAR apidx)
        pMaxHtPhy->word = 0;
        pHtPhy->word = 0;
 
-       // Auto rate switching is enabled only if more than one DESIRED RATES are
-       // specified; otherwise disabled
+       /* Auto rate switching is enabled only if more than one DESIRED RATES are */
+       /* specified; otherwise disabled */
        if (num <= 1) {
-               //OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED);
-               //pAd->CommonCfg.bAutoTxRateSwitch      = FALSE;
+               /*OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED); */
+               /*pAd->CommonCfg.bAutoTxRateSwitch      = FALSE; */
                *auto_rate_cur_p = FALSE;
        } else {
-               //OPSTATUS_SET_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED);
-               //pAd->CommonCfg.bAutoTxRateSwitch      = TRUE;
+               /*OPSTATUS_SET_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED); */
+               /*pAd->CommonCfg.bAutoTxRateSwitch      = TRUE; */
                *auto_rate_cur_p = TRUE;
        }
 
        if (HtMcs != MCS_AUTO) {
-               //OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED);
-               //pAd->CommonCfg.bAutoTxRateSwitch      = FALSE;
+               /*OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED); */
+               /*pAd->CommonCfg.bAutoTxRateSwitch      = FALSE; */
                *auto_rate_cur_p = FALSE;
        } else {
-               //OPSTATUS_SET_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED);
-               //pAd->CommonCfg.bAutoTxRateSwitch      = TRUE;
+               /*OPSTATUS_SET_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED); */
+               /*pAd->CommonCfg.bAutoTxRateSwitch      = TRUE; */
                *auto_rate_cur_p = TRUE;
        }
 
@@ -2963,7 +2962,7 @@ VOID MlmeUpdateTxRates(IN PRTMP_ADAPTER pAd, IN BOOLEAN bLinkUp, IN UCHAR apidx)
                ExtRateLen = pAd->CommonCfg.ExtRateLen;
        }
 
-       // find max supported rate
+       /* find max supported rate */
        for (i = 0; i < SupRateLen; i++) {
                switch (pSupRate[i] & 0x7f) {
                case 2:
@@ -3106,11 +3105,11 @@ VOID MlmeUpdateTxRates(IN PRTMP_ADAPTER pAd, IN BOOLEAN bLinkUp, IN UCHAR apidx)
 
        RTMP_IO_WRITE32(pAd, LEGACY_BASIC_RATE, BasicRateBitmap);
 
-       // bug fix
-       // pAd->CommonCfg.BasicRateBitmap = BasicRateBitmap;
+       /* bug fix */
+       /* pAd->CommonCfg.BasicRateBitmap = BasicRateBitmap; */
 
-       // calculate the exptected ACK rate for each TX rate. This info is used to caculate
-       // the DURATION field of outgoing uniicast DATA/MGMT frame
+       /* calculate the exptected ACK rate for each TX rate. This info is used to caculate */
+       /* the DURATION field of outgoing uniicast DATA/MGMT frame */
        for (i = 0; i < MAX_LEN_OF_SUPPORTED_RATES; i++) {
                if (BasicRateBitmap & (0x01 << i))
                        CurrBasicRate = (UCHAR) i;
@@ -3120,21 +3119,19 @@ VOID MlmeUpdateTxRates(IN PRTMP_ADAPTER pAd, IN BOOLEAN bLinkUp, IN UCHAR apidx)
        DBGPRINT(RT_DEBUG_TRACE,
                 ("MlmeUpdateTxRates[MaxSupport = %d] = MaxDesire %d Mbps\n",
                  RateIdToMbps[MaxSupport], RateIdToMbps[MaxDesire]));
-       // max tx rate = min {max desire rate, max supported rate}
+       /* max tx rate = min {max desire rate, max supported rate} */
        if (MaxSupport < MaxDesire)
                pAd->CommonCfg.MaxTxRate = MaxSupport;
        else
                pAd->CommonCfg.MaxTxRate = MaxDesire;
 
        pAd->CommonCfg.MinTxRate = MinSupport;
-       // 2003-07-31 john - 2500 doesn't have good sensitivity at high OFDM rates. to increase the success
-       // ratio of initial DHCP packet exchange, TX rate starts from a lower rate depending
-       // on average RSSI
-       //       1. RSSI >= -70db, start at 54 Mbps (short distance)
-       //       2. -70 > RSSI >= -75, start at 24 Mbps (mid distance)
-       //       3. -75 > RSSI, start at 11 Mbps (long distance)
-       //if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED)/* &&
-       //      OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)*/)
+       /* 2003-07-31 john - 2500 doesn't have good sensitivity at high OFDM rates. to increase the success */
+       /* ratio of initial DHCP packet exchange, TX rate starts from a lower rate depending */
+       /* on average RSSI */
+       /*       1. RSSI >= -70db, start at 54 Mbps (short distance) */
+       /*       2. -70 > RSSI >= -75, start at 24 Mbps (mid distance) */
+       /*       3. -75 > RSSI, start at 11 Mbps (long distance) */
        if (*auto_rate_cur_p) {
                short dbm = 0;
 
@@ -3150,7 +3147,7 @@ VOID MlmeUpdateTxRates(IN PRTMP_ADAPTER pAd, IN BOOLEAN bLinkUp, IN UCHAR apidx)
                else if (dbm < -70)
                        pAd->CommonCfg.TxRate = RATE_24;
 
-               // should never exceed MaxTxRate (consider 11B-only mode)
+               /* should never exceed MaxTxRate (consider 11B-only mode) */
                if (pAd->CommonCfg.TxRate > pAd->CommonCfg.MaxTxRate)
                        pAd->CommonCfg.TxRate = pAd->CommonCfg.MaxTxRate;
 
@@ -3206,11 +3203,11 @@ VOID MlmeUpdateTxRates(IN PRTMP_ADAPTER pAd, IN BOOLEAN bLinkUp, IN UCHAR apidx)
                        pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK;
                        pAd->CommonCfg.MlmeTransmit.field.MCS = RATE_1;
 
-//#ifdef        WIFI_TEST
+/*#ifdef        WIFI_TEST */
                        pAd->CommonCfg.RtsRate = RATE_11;
-//#else
-//                              pAd->CommonCfg.RtsRate = RATE_1;
-//#endif
+/*#else */
+/*                              pAd->CommonCfg.RtsRate = RATE_1; */
+/*#endif */
                        break;
                case PHY_11G:
                case PHY_11A:
@@ -3242,7 +3239,7 @@ VOID MlmeUpdateTxRates(IN PRTMP_ADAPTER pAd, IN BOOLEAN bLinkUp, IN UCHAR apidx)
                                    OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate];
                        }
                        break;
-               default:        // error
+               default:        /* error */
                        pAd->CommonCfg.MlmeRate = RATE_6;
                        pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_OFDM;
                        pAd->CommonCfg.MlmeTransmit.field.MCS =
@@ -3250,9 +3247,9 @@ VOID MlmeUpdateTxRates(IN PRTMP_ADAPTER pAd, IN BOOLEAN bLinkUp, IN UCHAR apidx)
                        pAd->CommonCfg.RtsRate = RATE_1;
                        break;
                }
-               //
-               // Keep Basic Mlme Rate.
-               //
+               /* */
+               /* Keep Basic Mlme Rate. */
+               /* */
                pAd->MacTab.Content[MCAST_WCID].HTPhyMode.word =
                    pAd->CommonCfg.MlmeTransmit.word;
                if (pAd->CommonCfg.MlmeTransmit.field.MODE == MODE_OFDM)
@@ -3297,8 +3294,8 @@ VOID MlmeUpdateTxRates(IN PRTMP_ADAPTER pAd, IN BOOLEAN bLinkUp, IN UCHAR apidx)
  */
 VOID MlmeUpdateHtTxRates(IN PRTMP_ADAPTER pAd, IN UCHAR apidx)
 {
-       UCHAR StbcMcs;          //j, StbcMcs, bitmask;
-       CHAR i;                 // 3*3
+       UCHAR StbcMcs;          /*j, StbcMcs, bitmask; */
+       CHAR i;                 /* 3*3 */
        RT_HT_CAPABILITY *pRtHtCap = NULL;
        RT_HT_PHY_INFO *pActiveHtPhy = NULL;
        ULONG BasicMCS;
@@ -3354,7 +3351,7 @@ VOID MlmeUpdateHtTxRates(IN PRTMP_ADAPTER pAd, IN UCHAR apidx)
                        pMaxHtPhy->field.STBC = STBC_NONE;
        }
 
-       // Decide MAX ht rate.
+       /* Decide MAX ht rate. */
        if ((pRtHtCap->GF) && (pAd->CommonCfg.DesiredHtPhy.GF))
                pMaxHtPhy->field.MODE = MODE_HTGREENFIELD;
        else
@@ -3379,7 +3376,7 @@ VOID MlmeUpdateHtTxRates(IN PRTMP_ADAPTER pAd, IN UCHAR apidx)
                pMaxHtPhy->field.MCS = 32;
        }
 
-       for (i = 23; i >= 0; i--)       // 3*3
+       for (i = 23; i >= 0; i--)       /* 3*3 */
        {
                j = i / 8;
                bitmask = (1 << (i - (j * 8)));
@@ -3394,12 +3391,12 @@ VOID MlmeUpdateHtTxRates(IN PRTMP_ADAPTER pAd, IN UCHAR apidx)
                        break;
        }
 
-       // Copy MIN ht rate.  rt2860???
+       /* Copy MIN ht rate.  rt2860??? */
        pMinHtPhy->field.BW = BW_20;
        pMinHtPhy->field.MCS = 0;
        pMinHtPhy->field.STBC = 0;
        pMinHtPhy->field.ShortGI = 0;
-       //If STA assigns fixed rate. update to fixed here.
+       /*If STA assigns fixed rate. update to fixed here. */
        if ((pAd->OpMode == OPMODE_STA) && (pDesireHtPhy->MCSSet[0] != 0xff)) {
                if (pDesireHtPhy->MCSSet[4] != 0) {
                        pMaxHtPhy->field.MCS = 32;
@@ -3409,7 +3406,7 @@ VOID MlmeUpdateHtTxRates(IN PRTMP_ADAPTER pAd, IN UCHAR apidx)
                                  pMinHtPhy->field.MCS));
                }
 
-               for (i = 23; (CHAR) i >= 0; i--)        // 3*3
+               for (i = 23; (CHAR) i >= 0; i--)        /* 3*3 */
                {
                        j = i / 8;
                        bitmask = (1 << (i - (j * 8)));
@@ -3424,14 +3421,14 @@ VOID MlmeUpdateHtTxRates(IN PRTMP_ADAPTER pAd, IN UCHAR apidx)
                }
        }
 
-       // Decide ht rate
+       /* Decide ht rate */
        pHtPhy->field.STBC = pMaxHtPhy->field.STBC;
        pHtPhy->field.BW = pMaxHtPhy->field.BW;
        pHtPhy->field.MODE = pMaxHtPhy->field.MODE;
        pHtPhy->field.MCS = pMaxHtPhy->field.MCS;
        pHtPhy->field.ShortGI = pMaxHtPhy->field.ShortGI;
 
-       // use default now. rt2860
+       /* use default now. rt2860 */
        if (pDesireHtPhy->MCSSet[0] != 0xff)
                *auto_rate_cur_p = FALSE;
        else
@@ -3464,21 +3461,21 @@ VOID BATableInit(IN PRTMP_ADAPTER pAd, IN BA_TABLE * Tab)
        }
 }
 
-// IRQL = DISPATCH_LEVEL
+/* IRQL = DISPATCH_LEVEL */
 VOID MlmeRadioOff(IN PRTMP_ADAPTER pAd)
 {
        RTMP_MLME_RADIO_OFF(pAd);
 }
 
-// IRQL = DISPATCH_LEVEL
+/* IRQL = DISPATCH_LEVEL */
 VOID MlmeRadioOn(IN PRTMP_ADAPTER pAd)
 {
        RTMP_MLME_RADIO_ON(pAd);
 }
 
-// ===========================================================================================
-// bss_table.c
-// ===========================================================================================
+/* =========================================================================================== */
+/* bss_table.c */
+/* =========================================================================================== */
 
 /*! \brief initialize BSS table
  *     \param p_tab pointer to the table
@@ -3498,7 +3495,7 @@ VOID BssTableInit(IN BSS_TABLE * Tab)
        Tab->BssOverlapNr = 0;
        for (i = 0; i < MAX_LEN_OF_BSS_TABLE; i++) {
                NdisZeroMemory(&Tab->BssEntry[i], sizeof(BSS_ENTRY));
-               Tab->BssEntry[i].Rssi = -127;   // initial the rssi as a minimum value
+               Tab->BssEntry[i].Rssi = -127;   /* initial the rssi as a minimum value */
        }
 }
 
@@ -3518,10 +3515,10 @@ ULONG BssTableSearch(IN BSS_TABLE * Tab, IN PUCHAR pBssid, IN UCHAR Channel)
        UCHAR i;
 
        for (i = 0; i < Tab->BssNr; i++) {
-               //
-               // Some AP that support A/B/G mode that may used the same BSSID on 11A and 11B/G.
-               // We should distinguish this case.
-               //
+               /* */
+               /* Some AP that support A/B/G mode that may used the same BSSID on 11A and 11B/G. */
+               /* We should distinguish this case. */
+               /* */
                if ((((Tab->BssEntry[i].Channel <= 14) && (Channel <= 14)) ||
                     ((Tab->BssEntry[i].Channel > 14) && (Channel > 14))) &&
                    MAC_ADDR_EQUAL(Tab->BssEntry[i].Bssid, pBssid)) {
@@ -3538,10 +3535,10 @@ ULONG BssSsidTableSearch(IN BSS_TABLE * Tab,
        UCHAR i;
 
        for (i = 0; i < Tab->BssNr; i++) {
-               //
-               // Some AP that support A/B/G mode that may used the same BSSID on 11A and 11B/G.
-               // We should distinguish this case.
-               //
+               /* */
+               /* Some AP that support A/B/G mode that may used the same BSSID on 11A and 11B/G. */
+               /* We should distinguish this case. */
+               /* */
                if ((((Tab->BssEntry[i].Channel <= 14) && (Channel <= 14)) ||
                     ((Tab->BssEntry[i].Channel > 14) && (Channel > 14))) &&
                    MAC_ADDR_EQUAL(Tab->BssEntry[i].Bssid, pBssid) &&
@@ -3593,7 +3590,7 @@ ULONG BssSsidTableSearchBySSID(IN BSS_TABLE * Tab,
        return (ULONG) BSS_NOT_FOUND;
 }
 
-// IRQL = DISPATCH_LEVEL
+/* IRQL = DISPATCH_LEVEL */
 VOID BssTableDeleteEntry(IN OUT BSS_TABLE * Tab,
                         IN PUCHAR pBssid, IN UCHAR Channel)
 {
@@ -3635,13 +3632,13 @@ VOID BATableDeleteORIEntry(IN OUT PRTMP_ADAPTER pAd,
                        DBGPRINT(RT_DEBUG_TRACE,
                                 ("BATableDeleteORIEntry numAsOriginator= %ld\n",
                                  pAd->BATable.numAsRecipient));
-                       // Erase Bitmap flag.
+                       /* Erase Bitmap flag. */
                }
-               pAd->MacTab.Content[pBAORIEntry->Wcid].TXBAbitmap &= (~(1 << (pBAORIEntry->TID)));      // If STA mode,  erase flag here
-               pAd->MacTab.Content[pBAORIEntry->Wcid].BAOriWcidArray[pBAORIEntry->TID] = 0;    // If STA mode,  erase flag here
+               pAd->MacTab.Content[pBAORIEntry->Wcid].TXBAbitmap &= (~(1 << (pBAORIEntry->TID)));      /* If STA mode,  erase flag here */
+               pAd->MacTab.Content[pBAORIEntry->Wcid].BAOriWcidArray[pBAORIEntry->TID] = 0;    /* If STA mode,  erase flag here */
                pBAORIEntry->ORI_BA_Status = Originator_NONE;
                pBAORIEntry->Token = 1;
-               // Not clear Sequence here.
+               /* Not clear Sequence here. */
                NdisReleaseSpinLock(&pAd->BATabLock);
        }
 }
@@ -3655,7 +3652,7 @@ VOID BATableDeleteORIEntry(IN OUT PRTMP_ADAPTER pAd,
  IRQL = DISPATCH_LEVEL
 
  */
-VOID BssEntrySet(IN PRTMP_ADAPTER pAd, OUT BSS_ENTRY * pBss, IN PUCHAR pBssid, IN CHAR Ssid[], IN UCHAR SsidLen, IN UCHAR BssType, IN USHORT BeaconPeriod, IN PCF_PARM pCfParm, IN USHORT AtimWin, IN USHORT CapabilityInfo, IN UCHAR SupRate[], IN UCHAR SupRateLen, IN UCHAR ExtRate[], IN UCHAR ExtRateLen, IN HT_CAPABILITY_IE * pHtCapability, IN ADD_HT_INFO_IE * pAddHtInfo,    // AP might use this additional ht info IE
+VOID BssEntrySet(IN PRTMP_ADAPTER pAd, OUT BSS_ENTRY * pBss, IN PUCHAR pBssid, IN CHAR Ssid[], IN UCHAR SsidLen, IN UCHAR BssType, IN USHORT BeaconPeriod, IN PCF_PARM pCfParm, IN USHORT AtimWin, IN USHORT CapabilityInfo, IN UCHAR SupRate[], IN UCHAR SupRateLen, IN UCHAR ExtRate[], IN UCHAR ExtRateLen, IN HT_CAPABILITY_IE * pHtCapability, IN ADD_HT_INFO_IE * pAddHtInfo,    /* AP might use this additional ht info IE */
                 IN UCHAR HtCapabilityLen,
                 IN UCHAR AddHtInfoLen,
                 IN UCHAR NewExtChanOffset,
@@ -3669,13 +3666,13 @@ VOID BssEntrySet(IN PRTMP_ADAPTER pAd, OUT BSS_ENTRY * pBss, IN PUCHAR pBssid, I
                 IN USHORT LengthVIE, IN PNDIS_802_11_VARIABLE_IEs pVIE)
 {
        COPY_MAC_ADDR(pBss->Bssid, pBssid);
-       // Default Hidden SSID to be TRUE, it will be turned to FALSE after coping SSID
+       /* Default Hidden SSID to be TRUE, it will be turned to FALSE after coping SSID */
        pBss->Hidden = 1;
        if (SsidLen > 0) {
-               // For hidden SSID AP, it might send beacon with SSID len equal to 0
-               // Or send beacon /probe response with SSID len matching real SSID length,
-               // but SSID is all zero. such as "00-00-00-00" with length 4.
-               // We have to prevent this case overwrite correct table
+               /* For hidden SSID AP, it might send beacon with SSID len equal to 0 */
+               /* Or send beacon /probe response with SSID len matching real SSID length, */
+               /* but SSID is all zero. such as "00-00-00-00" with length 4. */
+               /* We have to prevent this case overwrite correct table */
                if (NdisEqualMemory(Ssid, ZeroSsid, SsidLen) == 0) {
                        NdisZeroMemory(pBss->Ssid, MAX_LEN_OF_SSID);
                        NdisMoveMemory(pBss->Ssid, Ssid, SsidLen);
@@ -3698,8 +3695,8 @@ VOID BssEntrySet(IN PRTMP_ADAPTER pAd, OUT BSS_ENTRY * pBss, IN PUCHAR pBssid, I
        }
 
        pBss->CapabilityInfo = CapabilityInfo;
-       // The privacy bit indicate security is ON, it maight be WEP, TKIP or AES
-       // Combine with AuthMode, they will decide the connection methods.
+       /* The privacy bit indicate security is ON, it maight be WEP, TKIP or AES */
+       /* Combine with AuthMode, they will decide the connection methods. */
        pBss->Privacy = CAP_IS_PRIVACY_ON(pBss->CapabilityInfo);
        ASSERT(SupRateLen <= MAX_LEN_OF_SUPPORTED_RATES);
        if (SupRateLen <= MAX_LEN_OF_SUPPORTED_RATES)
@@ -3715,15 +3712,15 @@ VOID BssEntrySet(IN PRTMP_ADAPTER pAd, OUT BSS_ENTRY * pBss, IN PUCHAR pBssid, I
        pBss->Channel = Channel;
        pBss->CentralChannel = Channel;
        pBss->Rssi = Rssi;
-       // Update CkipFlag. if not exists, the value is 0x0
+       /* Update CkipFlag. if not exists, the value is 0x0 */
        pBss->CkipFlag = CkipFlag;
 
-       // New for microsoft Fixed IEs
+       /* New for microsoft Fixed IEs */
        NdisMoveMemory(pBss->FixIEs.Timestamp, &TimeStamp, 8);
        pBss->FixIEs.BeaconInterval = BeaconPeriod;
        pBss->FixIEs.Capabilities = CapabilityInfo;
 
-       // New for microsoft Variable IEs
+       /* New for microsoft Variable IEs */
        if (LengthVIE != 0) {
                pBss->VarIELen = LengthVIE;
                NdisMoveMemory(pBss->VarIEs, pVIE, pBss->VarIELen);
@@ -3762,7 +3759,7 @@ VOID BssEntrySet(IN PRTMP_ADAPTER pAd, OUT BSS_ENTRY * pBss, IN PUCHAR pBssid, I
 
        BssCipherParse(pBss);
 
-       // new for QOS
+       /* new for QOS */
        if (pEdcaParm)
                NdisMoveMemory(&pBss->EdcaParm, pEdcaParm, sizeof(EDCA_PARM));
        else
@@ -3811,7 +3808,7 @@ VOID BssEntrySet(IN PRTMP_ADAPTER pAd, OUT BSS_ENTRY * pBss, IN PUCHAR pBssid, I
                                }
                                break;
                        }
-                       Length = Length + 2 + (USHORT) pEid->Len;       // Eid[1] + Len[1]+ content[Len]
+                       Length = Length + 2 + (USHORT) pEid->Len;       /* Eid[1] + Len[1]+ content[Len] */
                        pEid = (PEID_STRUCT) ((UCHAR *) pEid + 2 + pEid->Len);
                }
        }
@@ -3840,7 +3837,7 @@ VOID BssEntrySet(IN PRTMP_ADAPTER pAd, OUT BSS_ENTRY * pBss, IN PUCHAR pBssid, I
  IRQL = DISPATCH_LEVEL
 
  */
-ULONG BssTableSetEntry(IN PRTMP_ADAPTER pAd, OUT BSS_TABLE * Tab, IN PUCHAR pBssid, IN CHAR Ssid[], IN UCHAR SsidLen, IN UCHAR BssType, IN USHORT BeaconPeriod, IN CF_PARM * CfParm, IN USHORT AtimWin, IN USHORT CapabilityInfo, IN UCHAR SupRate[], IN UCHAR SupRateLen, IN UCHAR ExtRate[], IN UCHAR ExtRateLen, IN HT_CAPABILITY_IE * pHtCapability, IN ADD_HT_INFO_IE * pAddHtInfo,       // AP might use this additional ht info IE
+ULONG BssTableSetEntry(IN PRTMP_ADAPTER pAd, OUT BSS_TABLE * Tab, IN PUCHAR pBssid, IN CHAR Ssid[], IN UCHAR SsidLen, IN UCHAR BssType, IN USHORT BeaconPeriod, IN CF_PARM * CfParm, IN USHORT AtimWin, IN USHORT CapabilityInfo, IN UCHAR SupRate[], IN UCHAR SupRateLen, IN UCHAR ExtRate[], IN UCHAR ExtRateLen, IN HT_CAPABILITY_IE * pHtCapability, IN ADD_HT_INFO_IE * pAddHtInfo,       /* AP might use this additional ht info IE */
                       IN UCHAR HtCapabilityLen,
                       IN UCHAR AddHtInfoLen,
                       IN UCHAR NewExtChanOffset,
@@ -3860,11 +3857,11 @@ ULONG BssTableSetEntry(IN PRTMP_ADAPTER pAd, OUT BSS_TABLE * Tab, IN PUCHAR pBss
                                   ChannelNo);
        if (Idx == BSS_NOT_FOUND) {
                if (Tab->BssNr >= MAX_LEN_OF_BSS_TABLE) {
-                       //
-                       // It may happen when BSS Table was full.
-                       // The desired AP will not be added into BSS Table
-                       // In this case, if we found the desired AP then overwrite BSS Table.
-                       //
+                       /* */
+                       /* It may happen when BSS Table was full. */
+                       /* The desired AP will not be added into BSS Table */
+                       /* In this case, if we found the desired AP then overwrite BSS Table. */
+                       /* */
                        if (!OPSTATUS_TEST_FLAG
                            (pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)) {
                                if (MAC_ADDR_EQUAL(pAd->MlmeAux.Bssid, pBssid)
@@ -3926,7 +3923,7 @@ ULONG BssTableSetEntry(IN PRTMP_ADAPTER pAd, OUT BSS_TABLE * Tab, IN PUCHAR pBss
        return Idx;
 }
 
-// IRQL = DISPATCH_LEVEL
+/* IRQL = DISPATCH_LEVEL */
 VOID BssTableSsidSort(IN PRTMP_ADAPTER pAd,
                      OUT BSS_TABLE * OutTab, IN CHAR Ssid[], IN UCHAR SsidLen)
 {
@@ -3950,7 +3947,7 @@ VOID BssTableSsidSort(IN PRTMP_ADAPTER pAd,
                     || bIsHiddenApIncluded)) {
                        BSS_ENTRY *pOutBss = &OutTab->BssEntry[OutTab->BssNr];
 
-                       // 2.4G/5G N only mode
+                       /* 2.4G/5G N only mode */
                        if ((pInBss->HtCapabilityLen == 0) &&
                            ((pAd->CommonCfg.PhyMode == PHY_11N_2_4G)
                             || (pAd->CommonCfg.PhyMode == PHY_11N_5G))) {
@@ -3958,28 +3955,28 @@ VOID BssTableSsidSort(IN PRTMP_ADAPTER pAd,
                                         ("STA is in N-only Mode, this AP don't have Ht capability in Beacon.\n"));
                                continue;
                        }
-                       // New for WPA2
-                       // Check the Authmode first
+                       /* New for WPA2 */
+                       /* Check the Authmode first */
                        if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA) {
-                               // Check AuthMode and AuthModeAux for matching, in case AP support dual-mode
+                               /* Check AuthMode and AuthModeAux for matching, in case AP support dual-mode */
                                if ((pAd->StaCfg.AuthMode != pInBss->AuthMode)
                                    && (pAd->StaCfg.AuthMode !=
                                        pInBss->AuthModeAux))
-                                       // None matched
+                                       /* None matched */
                                        continue;
 
-                               // Check cipher suite, AP must have more secured cipher than station setting
+                               /* Check cipher suite, AP must have more secured cipher than station setting */
                                if ((pAd->StaCfg.AuthMode ==
                                     Ndis802_11AuthModeWPA)
                                    || (pAd->StaCfg.AuthMode ==
                                        Ndis802_11AuthModeWPAPSK)) {
-                                       // If it's not mixed mode, we should only let BSS pass with the same encryption
+                                       /* If it's not mixed mode, we should only let BSS pass with the same encryption */
                                        if (pInBss->WPA.bMixMode == FALSE)
                                                if (pAd->StaCfg.WepStatus !=
                                                    pInBss->WPA.GroupCipher)
                                                        continue;
 
-                                       // check group cipher
+                                       /* check group cipher */
                                        if ((pAd->StaCfg.WepStatus <
                                             pInBss->WPA.GroupCipher)
                                            && (pInBss->WPA.GroupCipher !=
@@ -3988,9 +3985,9 @@ VOID BssTableSsidSort(IN PRTMP_ADAPTER pAd,
                                                Ndis802_11GroupWEP104Enabled))
                                                continue;
 
-                                       // check pairwise cipher, skip if none matched
-                                       // If profile set to AES, let it pass without question.
-                                       // If profile set to TKIP, we must find one mateched
+                                       /* check pairwise cipher, skip if none matched */
+                                       /* If profile set to AES, let it pass without question. */
+                                       /* If profile set to TKIP, we must find one mateched */
                                        if ((pAd->StaCfg.WepStatus ==
                                             Ndis802_11Encryption2Enabled)
                                            && (pAd->StaCfg.WepStatus !=
@@ -4003,13 +4000,13 @@ VOID BssTableSsidSort(IN PRTMP_ADAPTER pAd,
                                         Ndis802_11AuthModeWPA2)
                                        || (pAd->StaCfg.AuthMode ==
                                            Ndis802_11AuthModeWPA2PSK)) {
-                                       // If it's not mixed mode, we should only let BSS pass with the same encryption
+                                       /* If it's not mixed mode, we should only let BSS pass with the same encryption */
                                        if (pInBss->WPA2.bMixMode == FALSE)
                                                if (pAd->StaCfg.WepStatus !=
                                                    pInBss->WPA2.GroupCipher)
                                                        continue;
 
-                                       // check group cipher
+                                       /* check group cipher */
                                        if ((pAd->StaCfg.WepStatus <
                                             pInBss->WPA.GroupCipher)
                                            && (pInBss->WPA2.GroupCipher !=
@@ -4018,9 +4015,9 @@ VOID BssTableSsidSort(IN PRTMP_ADAPTER pAd,
                                                Ndis802_11GroupWEP104Enabled))
                                                continue;
 
-                                       // check pairwise cipher, skip if none matched
-                                       // If profile set to AES, let it pass without question.
-                                       // If profile set to TKIP, we must find one mateched
+                                       /* check pairwise cipher, skip if none matched */
+                                       /* If profile set to AES, let it pass without question. */
+                                       /* If profile set to TKIP, we must find one mateched */
                                        if ((pAd->StaCfg.WepStatus ==
                                             Ndis802_11Encryption2Enabled)
                                            && (pAd->StaCfg.WepStatus !=
@@ -4030,27 +4027,27 @@ VOID BssTableSsidSort(IN PRTMP_ADAPTER pAd,
                                                continue;
                                }
                        }
-                       // Bss Type matched, SSID matched.
-                       // We will check wepstatus for qualification Bss
+                       /* Bss Type matched, SSID matched. */
+                       /* We will check wepstatus for qualification Bss */
                        else if (pAd->StaCfg.WepStatus != pInBss->WepStatus) {
                                DBGPRINT(RT_DEBUG_TRACE,
                                         ("StaCfg.WepStatus=%d, while pInBss->WepStatus=%d\n",
                                          pAd->StaCfg.WepStatus,
                                          pInBss->WepStatus));
-                               //
-                               // For the SESv2 case, we will not qualify WepStatus.
-                               //
+                               /* */
+                               /* For the SESv2 case, we will not qualify WepStatus. */
+                               /* */
                                if (!pInBss->bSES)
                                        continue;
                        }
-                       // Since the AP is using hidden SSID, and we are trying to connect to ANY
-                       // It definitely will fail. So, skip it.
-                       // CCX also require not even try to connect it!!
+                       /* Since the AP is using hidden SSID, and we are trying to connect to ANY */
+                       /* It definitely will fail. So, skip it. */
+                       /* CCX also require not even try to connect it!! */
                        if (SsidLen == 0)
                                continue;
 
-                       // If both station and AP use 40MHz, still need to check if the 40MHZ band's legality in my country region
-                       // If this 40MHz wideband is not allowed in my country list, use bandwidth 20MHZ instead,
+                       /* If both station and AP use 40MHz, still need to check if the 40MHZ band's legality in my country region */
+                       /* If this 40MHz wideband is not allowed in my country list, use bandwidth 20MHZ instead, */
                        if ((pInBss->CentralChannel != pInBss->Channel) &&
                            (pAd->CommonCfg.RegTransmitSetting.field.BW ==
                             BW_40)) {
@@ -4069,7 +4066,7 @@ VOID BssTableSsidSort(IN PRTMP_ADAPTER pAd,
                                        }
                                }
                        }
-                       // copy matching BSS from InTab to OutTab
+                       /* copy matching BSS from InTab to OutTab */
                        NdisMoveMemory(pOutBss, pInBss, sizeof(BSS_ENTRY));
 
                        OutTab->BssNr++;
@@ -4077,7 +4074,7 @@ VOID BssTableSsidSort(IN PRTMP_ADAPTER pAd,
                           && (SsidLen == 0)) {
                        BSS_ENTRY *pOutBss = &OutTab->BssEntry[OutTab->BssNr];
 
-                       // 2.4G/5G N only mode
+                       /* 2.4G/5G N only mode */
                        if ((pInBss->HtCapabilityLen == 0) &&
                            ((pAd->CommonCfg.PhyMode == PHY_11N_2_4G)
                             || (pAd->CommonCfg.PhyMode == PHY_11N_5G))) {
@@ -4085,35 +4082,35 @@ VOID BssTableSsidSort(IN PRTMP_ADAPTER pAd,
                                         ("STA is in N-only Mode, this AP don't have Ht capability in Beacon.\n"));
                                continue;
                        }
-                       // New for WPA2
-                       // Check the Authmode first
+                       /* New for WPA2 */
+                       /* Check the Authmode first */
                        if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA) {
-                               // Check AuthMode and AuthModeAux for matching, in case AP support dual-mode
+                               /* Check AuthMode and AuthModeAux for matching, in case AP support dual-mode */
                                if ((pAd->StaCfg.AuthMode != pInBss->AuthMode)
                                    && (pAd->StaCfg.AuthMode !=
                                        pInBss->AuthModeAux))
-                                       // None matched
+                                       /* None matched */
                                        continue;
 
-                               // Check cipher suite, AP must have more secured cipher than station setting
+                               /* Check cipher suite, AP must have more secured cipher than station setting */
                                if ((pAd->StaCfg.AuthMode ==
                                     Ndis802_11AuthModeWPA)
                                    || (pAd->StaCfg.AuthMode ==
                                        Ndis802_11AuthModeWPAPSK)) {
-                                       // If it's not mixed mode, we should only let BSS pass with the same encryption
+                                       /* If it's not mixed mode, we should only let BSS pass with the same encryption */
                                        if (pInBss->WPA.bMixMode == FALSE)
                                                if (pAd->StaCfg.WepStatus !=
                                                    pInBss->WPA.GroupCipher)
                                                        continue;
 
-                                       // check group cipher
+                                       /* check group cipher */
                                        if (pAd->StaCfg.WepStatus <
                                            pInBss->WPA.GroupCipher)
                                                continue;
 
-                                       // check pairwise cipher, skip if none matched
-                                       // If profile set to AES, let it pass without question.
-                                       // If profile set to TKIP, we must find one mateched
+                                       /* check pairwise cipher, skip if none matched */
+                                       /* If profile set to AES, let it pass without question. */
+                                       /* If profile set to TKIP, we must find one mateched */
                                        if ((pAd->StaCfg.WepStatus ==
                                             Ndis802_11Encryption2Enabled)
                                            && (pAd->StaCfg.WepStatus !=
@@ -4126,20 +4123,20 @@ VOID BssTableSsidSort(IN PRTMP_ADAPTER pAd,
                                         Ndis802_11AuthModeWPA2)
                                        || (pAd->StaCfg.AuthMode ==
                                            Ndis802_11AuthModeWPA2PSK)) {
-                                       // If it's not mixed mode, we should only let BSS pass with the same encryption
+                                       /* If it's not mixed mode, we should only let BSS pass with the same encryption */
                                        if (pInBss->WPA2.bMixMode == FALSE)
                                                if (pAd->StaCfg.WepStatus !=
                                                    pInBss->WPA2.GroupCipher)
                                                        continue;
 
-                                       // check group cipher
+                                       /* check group cipher */
                                        if (pAd->StaCfg.WepStatus <
                                            pInBss->WPA2.GroupCipher)
                                                continue;
 
-                                       // check pairwise cipher, skip if none matched
-                                       // If profile set to AES, let it pass without question.
-                                       // If profile set to TKIP, we must find one mateched
+                                       /* check pairwise cipher, skip if none matched */
+                                       /* If profile set to AES, let it pass without question. */
+                                       /* If profile set to TKIP, we must find one mateched */
                                        if ((pAd->StaCfg.WepStatus ==
                                             Ndis802_11Encryption2Enabled)
                                            && (pAd->StaCfg.WepStatus !=
@@ -4149,13 +4146,13 @@ VOID BssTableSsidSort(IN PRTMP_ADAPTER pAd,
                                                continue;
                                }
                        }
-                       // Bss Type matched, SSID matched.
-                       // We will check wepstatus for qualification Bss
+                       /* Bss Type matched, SSID matched. */
+                       /* We will check wepstatus for qualification Bss */
                        else if (pAd->StaCfg.WepStatus != pInBss->WepStatus)
                                continue;
 
-                       // If both station and AP use 40MHz, still need to check if the 40MHZ band's legality in my country region
-                       // If this 40MHz wideband is not allowed in my country list, use bandwidth 20MHZ instead,
+                       /* If both station and AP use 40MHz, still need to check if the 40MHZ band's legality in my country region */
+                       /* If this 40MHz wideband is not allowed in my country list, use bandwidth 20MHZ instead, */
                        if ((pInBss->CentralChannel != pInBss->Channel) &&
                            (pAd->CommonCfg.RegTransmitSetting.field.BW ==
                             BW_40)) {
@@ -4169,7 +4166,7 @@ VOID BssTableSsidSort(IN PRTMP_ADAPTER pAd,
                                            BW = BW_40;
                                }
                        }
-                       // copy matching BSS from InTab to OutTab
+                       /* copy matching BSS from InTab to OutTab */
                        NdisMoveMemory(pOutBss, pInBss, sizeof(BSS_ENTRY));
 
                        OutTab->BssNr++;
@@ -4182,7 +4179,7 @@ VOID BssTableSsidSort(IN PRTMP_ADAPTER pAd,
        BssTableSortByRssi(OutTab);
 }
 
-// IRQL = DISPATCH_LEVEL
+/* IRQL = DISPATCH_LEVEL */
 VOID BssTableSortByRssi(IN OUT BSS_TABLE * OutTab)
 {
        INT i, j;
@@ -4214,26 +4211,26 @@ VOID BssCipherParse(IN OUT PBSS_ENTRY pBss)
        INT Length;
        NDIS_802_11_ENCRYPTION_STATUS TmpCipher;
 
-       //
-       // WepStatus will be reset later, if AP announce TKIP or AES on the beacon frame.
-       //
+       /* */
+       /* WepStatus will be reset later, if AP announce TKIP or AES on the beacon frame. */
+       /* */
        if (pBss->Privacy) {
                pBss->WepStatus = Ndis802_11WEPEnabled;
        } else {
                pBss->WepStatus = Ndis802_11WEPDisabled;
        }
-       // Set default to disable & open authentication before parsing variable IE
+       /* Set default to disable & open authentication before parsing variable IE */
        pBss->AuthMode = Ndis802_11AuthModeOpen;
        pBss->AuthModeAux = Ndis802_11AuthModeOpen;
 
-       // Init WPA setting
+       /* Init WPA setting */
        pBss->WPA.PairCipher = Ndis802_11WEPDisabled;
        pBss->WPA.PairCipherAux = Ndis802_11WEPDisabled;
        pBss->WPA.GroupCipher = Ndis802_11WEPDisabled;
        pBss->WPA.RsnCapability = 0;
        pBss->WPA.bMixMode = FALSE;
 
-       // Init WPA2 setting
+       /* Init WPA2 setting */
        pBss->WPA2.PairCipher = Ndis802_11WEPDisabled;
        pBss->WPA2.PairCipherAux = Ndis802_11WEPDisabled;
        pBss->WPA2.GroupCipher = Ndis802_11WEPDisabled;
@@ -4243,7 +4240,7 @@ VOID BssCipherParse(IN OUT PBSS_ENTRY pBss)
        Length = (INT) pBss->VarIELen;
 
        while (Length > 0) {
-               // Parse cipher suite base on WPA1 & WPA2, they should be parsed differently
+               /* Parse cipher suite base on WPA1 & WPA2, they should be parsed differently */
                pTmp = ((PUCHAR) pBss->VarIEs) + pBss->VarIELen - Length;
                pEid = (PEID_STRUCT) pTmp;
                switch (pEid->Eid) {
@@ -4254,24 +4251,24 @@ VOID BssCipherParse(IN OUT PBSS_ENTRY pBss)
                                break;
                        } else if (NdisEqualMemory(pEid->Octet, WPA_OUI, 4) !=
                                   1) {
-                               // if unsupported vendor specific IE
+                               /* if unsupported vendor specific IE */
                                break;
                        }
-                       // Skip OUI, version, and multicast suite
-                       // This part should be improved in the future when AP supported multiple cipher suite.
-                       // For now, it's OK since almost all APs have fixed cipher suite supported.
-                       // pTmp = (PUCHAR) pEid->Octet;
+                       /* Skip OUI, version, and multicast suite */
+                       /* This part should be improved in the future when AP supported multiple cipher suite. */
+                       /* For now, it's OK since almost all APs have fixed cipher suite supported. */
+                       /* pTmp = (PUCHAR) pEid->Octet; */
                        pTmp += 11;
 
-                       // Cipher Suite Selectors from Spec P802.11i/D3.2 P26.
-                       //      Value      Meaning
-                       //      0                       None
-                       //      1                       WEP-40
-                       //      2                       Tkip
-                       //      3                       WRAP
-                       //      4                       AES
-                       //      5                       WEP-104
-                       // Parse group cipher
+                       /* Cipher Suite Selectors from Spec P802.11i/D3.2 P26. */
+                       /*      Value      Meaning */
+                       /*      0                       None */
+                       /*      1                       WEP-40 */
+                       /*      2                       Tkip */
+                       /*      3                       WRAP */
+                       /*      4                       AES */
+                       /*      5                       WEP-104 */
+                       /* Parse group cipher */
                        switch (*pTmp) {
                        case 1:
                                pBss->WPA.GroupCipher =
@@ -4292,22 +4289,22 @@ VOID BssCipherParse(IN OUT PBSS_ENTRY pBss)
                        default:
                                break;
                        }
-                       // number of unicast suite
+                       /* number of unicast suite */
                        pTmp += 1;
 
-                       // skip all unicast cipher suites
-                       //Count = *(PUSHORT) pTmp;
+                       /* skip all unicast cipher suites */
+                       /*Count = *(PUSHORT) pTmp; */
                        Count = (pTmp[1] << 8) + pTmp[0];
                        pTmp += sizeof(USHORT);
 
-                       // Parsing all unicast cipher suite
+                       /* Parsing all unicast cipher suite */
                        while (Count > 0) {
-                               // Skip OUI
+                               /* Skip OUI */
                                pTmp += 3;
                                TmpCipher = Ndis802_11WEPDisabled;
                                switch (*pTmp) {
                                case 1:
-                               case 5: // Although WEP is not allowed in WPA related auth mode, we parse it anyway
+                               case 5: /* Although WEP is not allowed in WPA related auth mode, we parse it anyway */
                                        TmpCipher =
                                            Ndis802_11Encryption1Enabled;
                                        break;
@@ -4323,7 +4320,7 @@ VOID BssCipherParse(IN OUT PBSS_ENTRY pBss)
                                        break;
                                }
                                if (TmpCipher > pBss->WPA.PairCipher) {
-                                       // Move the lower cipher suite to PairCipherAux
+                                       /* Move the lower cipher suite to PairCipherAux */
                                        pBss->WPA.PairCipherAux =
                                            pBss->WPA.PairCipher;
                                        pBss->WPA.PairCipher = TmpCipher;
@@ -4334,15 +4331,15 @@ VOID BssCipherParse(IN OUT PBSS_ENTRY pBss)
                                Count--;
                        }
 
-                       // 4. get AKM suite counts
-                       //Count = *(PUSHORT) pTmp;
+                       /* 4. get AKM suite counts */
+                       /*Count = *(PUSHORT) pTmp; */
                        Count = (pTmp[1] << 8) + pTmp[0];
                        pTmp += sizeof(USHORT);
                        pTmp += 3;
 
                        switch (*pTmp) {
                        case 1:
-                               // Set AP support WPA-enterprise mode
+                               /* Set AP support WPA-enterprise mode */
                                if (pBss->AuthMode == Ndis802_11AuthModeOpen)
                                        pBss->AuthMode = Ndis802_11AuthModeWPA;
                                else
@@ -4350,7 +4347,7 @@ VOID BssCipherParse(IN OUT PBSS_ENTRY pBss)
                                            Ndis802_11AuthModeWPA;
                                break;
                        case 2:
-                               // Set AP support WPA-PSK mode
+                               /* Set AP support WPA-PSK mode */
                                if (pBss->AuthMode == Ndis802_11AuthModeOpen)
                                        pBss->AuthMode =
                                            Ndis802_11AuthModeWPAPSK;
@@ -4363,12 +4360,12 @@ VOID BssCipherParse(IN OUT PBSS_ENTRY pBss)
                        }
                        pTmp += 1;
 
-                       // Fixed for WPA-None
+                       /* Fixed for WPA-None */
                        if (pBss->BssType == BSS_ADHOC) {
                                pBss->AuthMode = Ndis802_11AuthModeWPANone;
                                pBss->AuthModeAux = Ndis802_11AuthModeWPANone;
                                pBss->WepStatus = pBss->WPA.GroupCipher;
-                               // Patched bugs for old driver
+                               /* Patched bugs for old driver */
                                if (pBss->WPA.PairCipherAux ==
                                    Ndis802_11WEPDisabled)
                                        pBss->WPA.PairCipherAux =
@@ -4376,7 +4373,7 @@ VOID BssCipherParse(IN OUT PBSS_ENTRY pBss)
                        } else
                                pBss->WepStatus = pBss->WPA.PairCipher;
 
-                       // Check the Pair & Group, if different, turn on mixed mode flag
+                       /* Check the Pair & Group, if different, turn on mixed mode flag */
                        if (pBss->WPA.GroupCipher != pBss->WPA.PairCipher)
                                pBss->WPA.bMixMode = TRUE;
 
@@ -4385,17 +4382,17 @@ VOID BssCipherParse(IN OUT PBSS_ENTRY pBss)
                case IE_RSN:
                        pRsnHeader = (PRSN_IE_HEADER_STRUCT) pTmp;
 
-                       // 0. Version must be 1
+                       /* 0. Version must be 1 */
                        if (le2cpu16(pRsnHeader->Version) != 1)
                                break;
                        pTmp += sizeof(RSN_IE_HEADER_STRUCT);
 
-                       // 1. Check group cipher
+                       /* 1. Check group cipher */
                        pCipher = (PCIPHER_SUITE_STRUCT) pTmp;
                        if (!RTMPEqualMemory(pTmp, RSN_OUI, 3))
                                break;
 
-                       // Parse group cipher
+                       /* Parse group cipher */
                        switch (pCipher->Type) {
                        case 1:
                                pBss->WPA2.GroupCipher =
@@ -4416,23 +4413,23 @@ VOID BssCipherParse(IN OUT PBSS_ENTRY pBss)
                        default:
                                break;
                        }
-                       // set to correct offset for next parsing
+                       /* set to correct offset for next parsing */
                        pTmp += sizeof(CIPHER_SUITE_STRUCT);
 
-                       // 2. Get pairwise cipher counts
-                       //Count = *(PUSHORT) pTmp;
+                       /* 2. Get pairwise cipher counts */
+                       /*Count = *(PUSHORT) pTmp; */
                        Count = (pTmp[1] << 8) + pTmp[0];
                        pTmp += sizeof(USHORT);
 
-                       // 3. Get pairwise cipher
-                       // Parsing all unicast cipher suite
+                       /* 3. Get pairwise cipher */
+                       /* Parsing all unicast cipher suite */
                        while (Count > 0) {
-                               // Skip OUI
+                               /* Skip OUI */
                                pCipher = (PCIPHER_SUITE_STRUCT) pTmp;
                                TmpCipher = Ndis802_11WEPDisabled;
                                switch (pCipher->Type) {
                                case 1:
-                               case 5: // Although WEP is not allowed in WPA related auth mode, we parse it anyway
+                               case 5: /* Although WEP is not allowed in WPA related auth mode, we parse it anyway */
                                        TmpCipher =
                                            Ndis802_11Encryption1Enabled;
                                        break;
@@ -4448,7 +4445,7 @@ VOID BssCipherParse(IN OUT PBSS_ENTRY pBss)
                                        break;
                                }
                                if (TmpCipher > pBss->WPA2.PairCipher) {
-                                       // Move the lower cipher suite to PairCipherAux
+                                       /* Move the lower cipher suite to PairCipherAux */
                                        pBss->WPA2.PairCipherAux =
                                            pBss->WPA2.PairCipher;
                                        pBss->WPA2.PairCipher = TmpCipher;
@@ -4459,13 +4456,13 @@ VOID BssCipherParse(IN OUT PBSS_ENTRY pBss)
                                Count--;
                        }
 
-                       // 4. get AKM suite counts
-                       //Count = *(PUSHORT) pTmp;
+                       /* 4. get AKM suite counts */
+                       /*Count = *(PUSHORT) pTmp; */
                        Count = (pTmp[1] << 8) + pTmp[0];
                        pTmp += sizeof(USHORT);
 
-                       // 5. Get AKM ciphers
-                       // Parsing all AKM ciphers
+                       /* 5. Get AKM ciphers */
+                       /* Parsing all AKM ciphers */
                        while (Count > 0) {
                                pAKM = (PAKM_SUITE_STRUCT) pTmp;
                                if (!RTMPEqualMemory(pTmp, RSN_OUI, 3))
@@ -4473,7 +4470,7 @@ VOID BssCipherParse(IN OUT PBSS_ENTRY pBss)
 
                                switch (pAKM->Type) {
                                case 1:
-                                       // Set AP support WPA-enterprise mode
+                                       /* Set AP support WPA-enterprise mode */
                                        if (pBss->AuthMode ==
                                            Ndis802_11AuthModeOpen)
                                                pBss->AuthMode =
@@ -4483,7 +4480,7 @@ VOID BssCipherParse(IN OUT PBSS_ENTRY pBss)
                                                    Ndis802_11AuthModeWPA2;
                                        break;
                                case 2:
-                                       // Set AP support WPA-PSK mode
+                                       /* Set AP support WPA-PSK mode */
                                        if (pBss->AuthMode ==
                                            Ndis802_11AuthModeOpen)
                                                pBss->AuthMode =
@@ -4506,7 +4503,7 @@ VOID BssCipherParse(IN OUT PBSS_ENTRY pBss)
                                Count--;
                        }
 
-                       // Fixed for WPA-None
+                       /* Fixed for WPA-None */
                        if (pBss->BssType == BSS_ADHOC) {
                                pBss->AuthMode = Ndis802_11AuthModeWPANone;
                                pBss->AuthModeAux = Ndis802_11AuthModeWPANone;
@@ -4514,7 +4511,7 @@ VOID BssCipherParse(IN OUT PBSS_ENTRY pBss)
                                    pBss->WPA2.PairCipherAux;
                                pBss->WPA.GroupCipher = pBss->WPA2.GroupCipher;
                                pBss->WepStatus = pBss->WPA.GroupCipher;
-                               // Patched bugs for old driver
+                               /* Patched bugs for old driver */
                                if (pBss->WPA.PairCipherAux ==
                                    Ndis802_11WEPDisabled)
                                        pBss->WPA.PairCipherAux =
@@ -4522,12 +4519,12 @@ VOID BssCipherParse(IN OUT PBSS_ENTRY pBss)
                        }
                        pBss->WepStatus = pBss->WPA2.PairCipher;
 
-                       // 6. Get RSN capability
-                       //pBss->WPA2.RsnCapability = *(PUSHORT) pTmp;
+                       /* 6. Get RSN capability */
+                       /*pBss->WPA2.RsnCapability = *(PUSHORT) pTmp; */
                        pBss->WPA2.RsnCapability = (pTmp[1] << 8) + pTmp[0];
                        pTmp += sizeof(USHORT);
 
-                       // Check the Pair & Group, if different, turn on mixed mode flag
+                       /* Check the Pair & Group, if different, turn on mixed mode flag */
                        if (pBss->WPA2.GroupCipher != pBss->WPA2.PairCipher)
                                pBss->WPA2.bMixMode = TRUE;
 
@@ -4539,9 +4536,9 @@ VOID BssCipherParse(IN OUT PBSS_ENTRY pBss)
        }
 }
 
-// ===========================================================================================
-// mac_table.c
-// ===========================================================================================
+/* =========================================================================================== */
+/* mac_table.c */
+/* =========================================================================================== */
 
 /*! \brief generates a random mac address value for IBSS BSSID
  *     \param Addr the bssid location
@@ -4557,7 +4554,7 @@ VOID MacAddrRandomBssid(IN PRTMP_ADAPTER pAd, OUT PUCHAR pAddr)
                pAddr[i] = RandomByte(pAd);
        }
 
-       pAddr[0] = (pAddr[0] & 0xfe) | 0x02;    // the first 2 bits must be 01xxxxxxxx
+       pAddr[0] = (pAddr[0] & 0xfe) | 0x02;    /* the first 2 bits must be 01xxxxxxxx */
 }
 
 /*! \brief init the management mac frame header
@@ -4584,17 +4581,17 @@ VOID MgtMacHeaderInit(IN PRTMP_ADAPTER pAd,
 
        pHdr80211->FC.Type = BTYPE_MGMT;
        pHdr80211->FC.SubType = SubType;
-//      if (SubType == SUBTYPE_ACK)     // sample, no use, it will conflict with ACTION frame sub type
-//              pHdr80211->FC.Type = BTYPE_CNTL;
+/*      if (SubType == SUBTYPE_ACK)     // sample, no use, it will conflict with ACTION frame sub type */
+/*              pHdr80211->FC.Type = BTYPE_CNTL; */
        pHdr80211->FC.ToDs = ToDs;
        COPY_MAC_ADDR(pHdr80211->Addr1, pDA);
        COPY_MAC_ADDR(pHdr80211->Addr2, pAd->CurrentAddress);
        COPY_MAC_ADDR(pHdr80211->Addr3, pBssid);
 }
 
-// ===========================================================================================
-// mem_mgmt.c
-// ===========================================================================================
+/* =========================================================================================== */
+/* mem_mgmt.c */
+/* =========================================================================================== */
 
 /*!***************************************************************************
  * This routine build an outgoing frame, and fill all information specified
@@ -4621,7 +4618,7 @@ ULONG MakeOutgoingFrame(OUT UCHAR * Buffer, OUT ULONG * FrameLen, ...)
        ULONG TotLeng;
        va_list Args;
 
-       // calculates the total length
+       /* calculates the total length */
        TotLeng = 0;
        va_start(Args, FrameLen);
        do {
@@ -4639,9 +4636,9 @@ ULONG MakeOutgoingFrame(OUT UCHAR * Buffer, OUT ULONG * FrameLen, ...)
        return TotLeng;
 }
 
-// ===========================================================================================
-// mlme_queue.c
-// ===========================================================================================
+/* =========================================================================================== */
+/* mlme_queue.c */
+/* =========================================================================================== */
 
 /*! \brief     Initialize The MLME Queue, used by MLME Functions
  *     \param  *Queue     The MLME Queue
@@ -4694,13 +4691,13 @@ BOOLEAN MlmeEnqueue(IN PRTMP_ADAPTER pAd,
        INT Tail;
        MLME_QUEUE *Queue = (MLME_QUEUE *) & pAd->Mlme.Queue;
 
-       // Do nothing if the driver is starting halt state.
-       // This might happen when timer already been fired before cancel timer with mlmehalt
+       /* Do nothing if the driver is starting halt state. */
+       /* This might happen when timer already been fired before cancel timer with mlmehalt */
        if (RTMP_TEST_FLAG
            (pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
                return FALSE;
 
-       // First check the size, it MUST not exceed the mlme queue size
+       /* First check the size, it MUST not exceed the mlme queue size */
        if (MsgLen > MGMT_DMA_BUFFER_SIZE) {
                DBGPRINT_ERR(("MlmeEnqueue: msg too large, size = %ld \n",
                              MsgLen));
@@ -4761,15 +4758,15 @@ BOOLEAN MlmeEnqueueForRecv(IN PRTMP_ADAPTER pAd,
        INT MsgType;
        MLME_QUEUE *Queue = (MLME_QUEUE *) & pAd->Mlme.Queue;
 
-       // Do nothing if the driver is starting halt state.
-       // This might happen when timer already been fired before cancel timer with mlmehalt
+       /* Do nothing if the driver is starting halt state. */
+       /* This might happen when timer already been fired before cancel timer with mlmehalt */
        if (RTMP_TEST_FLAG
            (pAd,
             fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST)) {
                DBGPRINT_ERR(("MlmeEnqueueForRecv: fRTMP_ADAPTER_HALT_IN_PROGRESS\n"));
                return FALSE;
        }
-       // First check the size, it MUST not exceed the mlme queue size
+       /* First check the size, it MUST not exceed the mlme queue size */
        if (MsgLen > MGMT_DMA_BUFFER_SIZE) {
                DBGPRINT_ERR(("MlmeEnqueueForRecv: frame too large, size = %ld \n", MsgLen));
                return FALSE;
@@ -4786,7 +4783,7 @@ BOOLEAN MlmeEnqueueForRecv(IN PRTMP_ADAPTER pAd,
                }
        }
 
-       // OK, we got all the informations, it is time to put things into queue
+       /* OK, we got all the informations, it is time to put things into queue */
        NdisAcquireSpinLock(&(Queue->Lock));
        Tail = Queue->Tail;
        Queue->Tail++;
@@ -4842,12 +4839,12 @@ BOOLEAN MlmeDequeue(IN MLME_QUEUE * Queue, OUT MLME_QUEUE_ELEM ** Elem)
        return TRUE;
 }
 
-// IRQL = DISPATCH_LEVEL
+/* IRQL = DISPATCH_LEVEL */
 VOID MlmeRestartStateMachine(IN PRTMP_ADAPTER pAd)
 {
 #ifdef RTMP_MAC_PCI
        MLME_QUEUE_ELEM *Elem = NULL;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
        BOOLEAN Cancelled;
 
        DBGPRINT(RT_DEBUG_TRACE, ("MlmeRestartStateMachine \n"));
@@ -4862,11 +4859,11 @@ VOID MlmeRestartStateMachine(IN PRTMP_ADAPTER pAd)
        }
        NdisReleaseSpinLock(&pAd->Mlme.TaskLock);
 
-       // Remove all Mlme queues elements
+       /* Remove all Mlme queues elements */
        while (!MlmeQueueEmpty(&pAd->Mlme.Queue)) {
-               //From message type, determine which state machine I should drive
+               /*From message type, determine which state machine I should drive */
                if (MlmeDequeue(&pAd->Mlme.Queue, &Elem)) {
-                       // free MLME element
+                       /* free MLME element */
                        Elem->Occupied = FALSE;
                        Elem->MsgLen = 0;
 
@@ -4874,11 +4871,11 @@ VOID MlmeRestartStateMachine(IN PRTMP_ADAPTER pAd)
                        DBGPRINT_ERR(("MlmeRestartStateMachine: MlmeQueue empty\n"));
                }
        }
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
        {
-               // Cancel all timer events
-               // Be careful to cancel new added timer
+               /* Cancel all timer events */
+               /* Be careful to cancel new added timer */
                RTMPCancelTimer(&pAd->MlmeAux.AssocTimer, &Cancelled);
                RTMPCancelTimer(&pAd->MlmeAux.ReassocTimer, &Cancelled);
                RTMPCancelTimer(&pAd->MlmeAux.DisassocTimer, &Cancelled);
@@ -4888,15 +4885,15 @@ VOID MlmeRestartStateMachine(IN PRTMP_ADAPTER pAd)
 
        }
 
-       // Change back to original channel in case of doing scan
+       /* Change back to original channel in case of doing scan */
        AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
        AsicLockChannel(pAd, pAd->CommonCfg.Channel);
 
-       // Resume MSDU which is turned off durning scan
+       /* Resume MSDU which is turned off durning scan */
        RTMPResumeMsduTransmission(pAd);
 
        {
-               // Set all state machines back IDLE
+               /* Set all state machines back IDLE */
                pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
                pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
                pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
@@ -4906,11 +4903,11 @@ VOID MlmeRestartStateMachine(IN PRTMP_ADAPTER pAd)
        }
 
 #ifdef RTMP_MAC_PCI
-       // Remove running state
+       /* Remove running state */
        NdisAcquireSpinLock(&pAd->Mlme.TaskLock);
        pAd->Mlme.bRunning = FALSE;
        NdisReleaseSpinLock(&pAd->Mlme.TaskLock);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 }
 
 /*! \brief     test if the MLME Queue is empty
@@ -4994,10 +4991,10 @@ BOOLEAN MsgTypeSubst(IN PRTMP_ADAPTER pAd,
        UCHAR EAPType;
        PUCHAR pData;
 
-       // Pointer to start of data frames including SNAP header
+       /* Pointer to start of data frames including SNAP header */
        pData = (PUCHAR) pFrame + LENGTH_802_11;
 
-       // The only data type will pass to this function is EAPOL frame
+       /* The only data type will pass to this function is EAPOL frame */
        if (pFrame->Hdr.FC.Type == BTYPE_DATA) {
                {
                        *Machine = WPA_STATE_MACHINE;
@@ -5046,7 +5043,7 @@ BOOLEAN MsgTypeSubst(IN PRTMP_ADAPTER pAd,
                *MsgType = MT2_PEER_DISASSOC_REQ;
                break;
        case SUBTYPE_AUTH:
-               // get the sequence number from payload 24 Mac Header + 2 bytes algorithm
+               /* get the sequence number from payload 24 Mac Header + 2 bytes algorithm */
                NdisMoveMemory(&Seq, &pFrame->Octet[2], sizeof(USHORT));
                NdisMoveMemory(&Alg, &pFrame->Octet[0], sizeof(USHORT));
                if (Seq == 1 || Seq == 3) {
@@ -5067,7 +5064,7 @@ BOOLEAN MsgTypeSubst(IN PRTMP_ADAPTER pAd,
                break;
        case SUBTYPE_ACTION:
                *Machine = ACTION_STATE_MACHINE;
-               //  Sometimes Sta will return with category bytes with MSB = 1, if they receive catogory out of their support
+               /*  Sometimes Sta will return with category bytes with MSB = 1, if they receive catogory out of their support */
                if ((pFrame->Octet[0] & 0x7F) > MAX_PEER_CATE_MSG) {
                        *MsgType = MT2_ACT_INVALID;
                } else {
@@ -5082,9 +5079,9 @@ BOOLEAN MsgTypeSubst(IN PRTMP_ADAPTER pAd,
        return TRUE;
 }
 
-// ===========================================================================================
-// state_machine.c
-// ===========================================================================================
+/* =========================================================================================== */
+/* state_machine.c */
+/* =========================================================================================== */
 
 /*! \brief Initialize the state machine.
  *     \param *S                       pointer to the state machine
@@ -5109,21 +5106,21 @@ VOID StateMachineInit(IN STATE_MACHINE * S,
 {
        ULONG i, j;
 
-       // set number of states and messages
+       /* set number of states and messages */
        S->NrState = StNr;
        S->NrMsg = MsgNr;
        S->Base = Base;
 
        S->TransFunc = Trans;
 
-       // init all state transition to default function
+       /* init all state transition to default function */
        for (i = 0; i < StNr; i++) {
                for (j = 0; j < MsgNr; j++) {
                        S->TransFunc[i * MsgNr + j] = DefFunc;
                }
        }
 
-       // set the starting state
+       /* set the starting state */
        S->CurrState = InitState;
 }
 
@@ -5147,7 +5144,7 @@ VOID StateMachineSetAction(IN STATE_MACHINE * S,
        MsgIdx = Msg - S->Base;
 
        if (St < S->NrState && MsgIdx < S->NrMsg) {
-               // boundary checking before setting the action
+               /* boundary checking before setting the action */
                S->TransFunc[St * S->NrMsg + MsgIdx] = Func;
        }
 }
@@ -5180,9 +5177,9 @@ VOID Drop(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 {
 }
 
-// ===========================================================================================
-// lfsr.c
-// ===========================================================================================
+/* =========================================================================================== */
+/* lfsr.c */
+/* =========================================================================================== */
 
 /*
        ==========================================================================
@@ -5260,7 +5257,7 @@ VOID RTMPCheckRates(IN PRTMP_ADAPTER pAd,
        else
                RateIdx = 12;
 
-       // Check for support rates exclude basic rate bit
+       /* Check for support rates exclude basic rate bit */
        for (i = 0; i < *SupRateLen; i++)
                for (j = 0; j < RateIdx; j++)
                        if ((SupRate[i] & 0x7f) == RateIdTo500Kbps[j])
@@ -5277,7 +5274,7 @@ BOOLEAN RTMPCheckChannel(IN PRTMP_ADAPTER pAd,
        UCHAR UpperChannel = 0, LowerChannel = 0;
        UCHAR NoEffectChannelinList = 0;
 
-       // Find upper and lower channel according to 40MHz current operation.
+       /* Find upper and lower channel according to 40MHz current operation. */
        if (CentralChannel < Channel) {
                UpperChannel = Channel;
                if (CentralChannel > 2)
@@ -5331,11 +5328,11 @@ BOOLEAN RTMPCheckHt(IN PRTMP_ADAPTER pAd,
        if (Wcid >= MAX_LEN_OF_MAC_TABLE)
                return FALSE;
 
-       // If use AMSDU, set flag.
+       /* If use AMSDU, set flag. */
        if (pAd->CommonCfg.DesiredHtPhy.AmsduEnable)
                CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[Wcid],
                                       fCLIENT_STATUS_AMSDU_INUSED);
-       // Save Peer Capability
+       /* Save Peer Capability */
        if (pHtCapability->HtCapInfo.ShortGIfor20)
                CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[Wcid],
                                       fCLIENT_STATUS_SGI20_CAPABLE);
@@ -5357,7 +5354,7 @@ BOOLEAN RTMPCheckHt(IN PRTMP_ADAPTER pAd,
                pAd->MacTab.Content[Wcid].MpduDensity =
                    pHtCapability->HtCapParm.MpduDensity;
        }
-       // Will check ChannelWidth for MCSSet[4] below
+       /* Will check ChannelWidth for MCSSet[4] below */
        pAd->MlmeAux.HtCapability.MCSSet[4] = 0x1;
        switch (pAd->CommonCfg.RxStream) {
        case 1:
@@ -5396,7 +5393,7 @@ BOOLEAN RTMPCheckHt(IN PRTMP_ADAPTER pAd,
        pAd->MlmeAux.HtCapability.HtCapInfo.GF =
            pHtCapability->HtCapInfo.GF & pAd->CommonCfg.DesiredHtPhy.GF;
 
-       // Send Assoc Req with my HT capability.
+       /* Send Assoc Req with my HT capability. */
        pAd->MlmeAux.HtCapability.HtCapInfo.AMsduSize =
            pAd->CommonCfg.DesiredHtPhy.AmsduSize;
        pAd->MlmeAux.HtCapability.HtCapInfo.MimoPs =
@@ -5430,7 +5427,7 @@ BOOLEAN RTMPCheckHt(IN PRTMP_ADAPTER pAd,
        }
 
        if (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_20)
-               pAd->MlmeAux.HtCapability.MCSSet[4] = 0x0;      // BW20 can't transmit MCS32
+               pAd->MlmeAux.HtCapability.MCSSet[4] = 0x0;      /* BW20 can't transmit MCS32 */
 
        COPY_AP_HTSETTINGS_FROM_BEACON(pAd, pHtCapability);
        return TRUE;
@@ -5455,8 +5452,8 @@ BOOLEAN RTMPCheckHt(IN PRTMP_ADAPTER pAd,
 VOID RTMPUpdateMlmeRate(IN PRTMP_ADAPTER pAd)
 {
        UCHAR MinimumRate;
-       UCHAR ProperMlmeRate;   //= RATE_54;
-       UCHAR i, j, RateIdx = 12;       //1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54
+       UCHAR ProperMlmeRate;   /*= RATE_54; */
+       UCHAR i, j, RateIdx = 12;       /*1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54 */
        BOOLEAN bMatch = FALSE;
 
        switch (pAd->CommonCfg.PhyMode) {
@@ -5469,7 +5466,7 @@ VOID RTMPUpdateMlmeRate(IN PRTMP_ADAPTER pAd)
        case PHY_11BGN_MIXED:
                if ((pAd->MlmeAux.SupRateLen == 4) &&
                    (pAd->MlmeAux.ExtRateLen == 0))
-                       // B only AP
+                       /* B only AP */
                        ProperMlmeRate = RATE_11;
                else
                        ProperMlmeRate = RATE_24;
@@ -5480,7 +5477,7 @@ VOID RTMPUpdateMlmeRate(IN PRTMP_ADAPTER pAd)
                        MinimumRate = RATE_6;
                break;
        case PHY_11A:
-       case PHY_11N_2_4G:      // rt2860 need to check mlmerate for 802.11n
+       case PHY_11N_2_4G:      /* rt2860 need to check mlmerate for 802.11n */
        case PHY_11GN_MIXED:
        case PHY_11AGN_MIXED:
        case PHY_11AN_MIXED:
@@ -5495,7 +5492,7 @@ VOID RTMPUpdateMlmeRate(IN PRTMP_ADAPTER pAd)
                else
                        MinimumRate = RATE_6;
                break;
-       default:                // error
+       default:                /* error */
                ProperMlmeRate = RATE_1;
                MinimumRate = RATE_1;
                break;
@@ -5609,16 +5606,16 @@ VOID AsicEvaluateRxAnt(IN PRTMP_ADAPTER pAd)
            OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)
 #ifdef RT30xx
            || (pAd->EepromAccess)
-#endif // RT30xx //
+#endif /* RT30xx // */
 #ifdef RT3090
            || (pAd->bPCIclkOff == TRUE)
-#endif // RT3090 //
+#endif /* RT3090 // */
            )
                return;
 
        {
-               //if (pAd->StaCfg.Psm == PWR_SAVE)
-               //      return;
+               /*if (pAd->StaCfg.Psm == PWR_SAVE) */
+               /*      return; */
 
                {
 
@@ -5637,7 +5634,7 @@ VOID AsicEvaluateRxAnt(IN PRTMP_ADAPTER pAd)
                        RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
 #ifdef RTMP_MAC_PCI
                        pAd->StaCfg.BBPR3 = BBPR3;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
                        if (OPSTATUS_TEST_FLAG
                            (pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)
                            ) {
@@ -5646,7 +5643,7 @@ VOID AsicEvaluateRxAnt(IN PRTMP_ADAPTER pAd)
                                    pAd->RalinkCounters.OneSecTxRetryOkCount +
                                    pAd->RalinkCounters.OneSecTxFailCount;
 
-                               // dynamic adjust antenna evaluation period according to the traffic
+                               /* dynamic adjust antenna evaluation period according to the traffic */
                                if (TxTotalCnt > 50) {
                                        RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer,
                                                     20);
@@ -5691,21 +5688,21 @@ VOID AsicRxAntEvalTimeout(IN PVOID SystemSpecific1,
            OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)
 #ifdef RT30xx
            || (pAd->EepromAccess)
-#endif // RT30xx //
+#endif /* RT30xx // */
 #ifdef RT3090
            || (pAd->bPCIclkOff == TRUE)
-#endif // RT3090 //
+#endif /* RT3090 // */
            )
                return;
 
        {
-               //if (pAd->StaCfg.Psm == PWR_SAVE)
-               //      return;
+               /*if (pAd->StaCfg.Psm == PWR_SAVE) */
+               /*      return; */
                {
                        if (pAd->StaCfg.Psm == PWR_SAVE)
                                return;
 
-                       // if the traffic is low, use average rssi as the criteria
+                       /* if the traffic is low, use average rssi as the criteria */
                        if (pAd->Mlme.bLowThroughput == TRUE) {
                                rssi0 = pAd->StaCfg.RssiSample.LastRssi0;
                                rssi1 = pAd->StaCfg.RssiSample.LastRssi1;
@@ -5742,7 +5739,7 @@ VOID AsicRxAntEvalTimeout(IN PVOID SystemSpecific1,
                        RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
 #ifdef RTMP_MAC_PCI
                        pAd->StaCfg.BBPR3 = BBPR3;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
                }
        }
 
@@ -5759,7 +5756,7 @@ VOID APSDPeriodicExec(IN PVOID SystemSpecific1,
 
        pAd->CommonCfg.TriggerTimerCount++;
 
-// Driver should not send trigger frame, it should be send by application layer
+/* Driver should not send trigger frame, it should be send by application layer */
 /*
        if (pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable
                && (pAd->CommonCfg.bNeedSendTriggerFrame ||
@@ -5818,7 +5815,7 @@ BOOLEAN RTMPCheckEntryEnableAutoRateSwitch(IN PRTMP_ADAPTER pAd,
        BOOLEAN result = TRUE;
 
        {
-               // only associated STA counts
+               /* only associated STA counts */
                if (pEntry && (pEntry->ValidAsCLI)
                    && (pEntry->Sst == SST_ASSOC)) {
                        result = pAd->StaCfg.bAutoTxRateSwitch;
@@ -5895,12 +5892,12 @@ VOID RTMPUpdateLegacyTxSetting(UCHAR fixed_tx_mode, PMAC_TABLE_ENTRY pEntry)
 
        if (fixed_tx_mode == FIXED_TXMODE_CCK) {
                TransmitSetting.field.MODE = MODE_CCK;
-               // CCK mode allow MCS 0~3
+               /* CCK mode allow MCS 0~3 */
                if (TransmitSetting.field.MCS > MCS_3)
                        TransmitSetting.field.MCS = MCS_3;
        } else {
                TransmitSetting.field.MODE = MODE_OFDM;
-               // OFDM mode allow MCS 0~7
+               /* OFDM mode allow MCS 0~7 */
                if (TransmitSetting.field.MCS > MCS_7)
                        TransmitSetting.field.MCS = MCS_7;
        }
@@ -5926,17 +5923,17 @@ VOID RTMPUpdateLegacyTxSetting(UCHAR fixed_tx_mode, PMAC_TABLE_ENTRY pEntry)
  */
 VOID AsicStaBbpTuning(IN PRTMP_ADAPTER pAd)
 {
-       UCHAR OrigR66Value = 0, R66;    //, R66UpperBound = 0x30, R66LowerBound = 0x30;
+       UCHAR OrigR66Value = 0, R66;    /*, R66UpperBound = 0x30, R66LowerBound = 0x30; */
        CHAR Rssi;
 
-       // 2860C did not support Fase CCA, therefore can't tune
+       /* 2860C did not support Fase CCA, therefore can't tune */
        if (pAd->MACVersion == 0x28600100)
                return;
 
-       //
-       // work as a STA
-       //
-       if (pAd->Mlme.CntlMachine.CurrState != CNTL_IDLE)       // no R66 tuning when SCANNING
+       /* */
+       /* work as a STA */
+       /* */
+       if (pAd->Mlme.CntlMachine.CurrState != CNTL_IDLE)       /* no R66 tuning when SCANNING */
                return;
 
        if ((pAd->OpMode == OPMODE_STA)
@@ -5945,7 +5942,7 @@ VOID AsicStaBbpTuning(IN PRTMP_ADAPTER pAd)
            && !(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
 #ifdef RTMP_MAC_PCI
            && (pAd->bPCIclkOff == FALSE)
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
            ) {
                RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R66, &OrigR66Value);
                R66 = OrigR66Value;
@@ -5957,10 +5954,10 @@ VOID AsicStaBbpTuning(IN PRTMP_ADAPTER pAd)
                else
                        Rssi = pAd->StaCfg.RssiSample.AvgRssi0;
 
-               if (pAd->LatchRfRegs.Channel <= 14) {   //BG band
+               if (pAd->LatchRfRegs.Channel <= 14) {   /*BG band */
 #ifdef RT30xx
-                       // RT3070 is a no LNA solution, it should have different control regarding to AGC gain control
-                       // Otherwise, it will have some throughput side effect when low RSSI
+                       /* RT3070 is a no LNA solution, it should have different control regarding to AGC gain control */
+                       /* Otherwise, it will have some throughput side effect when low RSSI */
 
                        if (IS_RT3070(pAd) || IS_RT3090(pAd) || IS_RT3572(pAd)
                            || IS_RT3390(pAd)) {
@@ -5979,7 +5976,7 @@ VOID AsicStaBbpTuning(IN PRTMP_ADAPTER pAd)
                                        }
                                }
                        } else
-#endif // RT30xx //
+#endif /* RT30xx // */
                        {
                                if (Rssi > RSSI_FOR_MID_LOW_SENSIBILITY) {
                                        R66 = (0x2E + GET_LNA_GAIN(pAd)) + 0x10;
@@ -5995,7 +5992,7 @@ VOID AsicStaBbpTuning(IN PRTMP_ADAPTER pAd)
                                        }
                                }
                        }
-               } else {        //A band
+               } else {        /*A band */
                        if (pAd->CommonCfg.BBPCurrentBW == BW_20) {
                                if (Rssi > RSSI_FOR_MID_LOW_SENSIBILITY) {
                                        R66 =
@@ -6040,7 +6037,7 @@ VOID RTMPSetAGCInitValue(IN PRTMP_ADAPTER pAd, IN UCHAR BandWidth)
 {
        UCHAR R66 = 0x30;
 
-       if (pAd->LatchRfRegs.Channel <= 14) {   // BG band
+       if (pAd->LatchRfRegs.Channel <= 14) {   /* BG band */
 #ifdef RT30xx
                /* Gary was verified Amazon AP and find that RT307x has BBP_R66 invalid default value */
 
@@ -6049,12 +6046,12 @@ VOID RTMPSetAGCInitValue(IN PRTMP_ADAPTER pAd, IN UCHAR BandWidth)
                        R66 = 0x1C + 2 * GET_LNA_GAIN(pAd);
                        RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
                } else
-#endif // RT30xx //
+#endif /* RT30xx // */
                {
                        R66 = 0x2E + GET_LNA_GAIN(pAd);
                        RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
                }
-       } else {                //A band
+       } else {                /*A band */
                {
                        if (BandWidth == BW_20) {
                                R66 =
index cc45a08..0af7e6b 100644 (file)
@@ -147,1276 +147,1276 @@ CH_FREQ_MAP CH_HZ_ID_MAP[] = {
 INT CH_HZ_ID_MAP_NUM = (sizeof(CH_HZ_ID_MAP) / sizeof(CH_FREQ_MAP));
 
 CH_REGION ChRegion[] = {
-       {                       // Antigua and Berbuda
+       {                       /* Antigua and Berbuda */
         "AG",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, BOTH, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 23, BOTH, FALSE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 30, BOTH, FALSE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Argentina
+       {                       /* Argentina */
         "AR",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {52, 4, 24, BOTH, FALSE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {149, 4, 30, BOTH, FALSE}
-         ,                     // 5G, ch 149~161
+         ,                     /* 5G, ch 149~161 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Aruba
+       {                       /* Aruba */
         "AW",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, BOTH, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 23, BOTH, FALSE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 30, BOTH, FALSE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Australia
+       {                       /* Australia */
         "AU",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, BOTH, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 24, BOTH, FALSE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {149, 5, 30, BOTH, FALSE}
-         ,                     // 5G, ch 149~165
+         ,                     /* 5G, ch 149~165 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Austria
+       {                       /* Austria */
         "AT",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, IDOR, TRUE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 23, IDOR, TRUE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 30, BOTH, TRUE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Bahamas
+       {                       /* Bahamas */
         "BS",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, BOTH, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 24, BOTH, FALSE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {149, 5, 30, BOTH, FALSE}
-         ,                     // 5G, ch 149~165
+         ,                     /* 5G, ch 149~165 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Barbados
+       {                       /* Barbados */
         "BB",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, BOTH, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 24, BOTH, FALSE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 30, BOTH, FALSE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Bermuda
+       {                       /* Bermuda */
         "BM",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, BOTH, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 24, BOTH, FALSE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 30, BOTH, FALSE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Brazil
+       {                       /* Brazil */
         "BR",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, BOTH, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 24, BOTH, FALSE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 24, BOTH, FALSE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {149, 5, 30, BOTH, FALSE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Belgium
+       {                       /* Belgium */
         "BE",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 18, IDOR, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 18, IDOR, FALSE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Bulgaria
+       {                       /* Bulgaria */
         "BG",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, IDOR, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 23, IDOR, TRUE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 30, ODOR, TRUE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Canada
+       {                       /* Canada */
         "CA",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, BOTH, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 23, BOTH, FALSE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {149, 5, 30, BOTH, FALSE}
-         ,                     // 5G, ch 149~165
+         ,                     /* 5G, ch 149~165 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Cayman IsLands
+       {                       /* Cayman IsLands */
         "KY",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, BOTH, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 24, BOTH, FALSE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 30, BOTH, FALSE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Chile
+       {                       /* Chile */
         "CL",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 20, BOTH, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 20, BOTH, FALSE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {149, 5, 20, BOTH, FALSE}
-         ,                     // 5G, ch 149~165
+         ,                     /* 5G, ch 149~165 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // China
+       {                       /* China */
         "CN",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {149, 4, 27, BOTH, FALSE}
-         ,                     // 5G, ch 149~161
+         ,                     /* 5G, ch 149~161 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Colombia
+       {                       /* Colombia */
         "CO",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 17, BOTH, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 24, BOTH, FALSE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 30, BOTH, FALSE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {149, 5, 30, BOTH, FALSE}
-         ,                     // 5G, ch 149~165
+         ,                     /* 5G, ch 149~165 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Costa Rica
+       {                       /* Costa Rica */
         "CR",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 17, BOTH, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 24, BOTH, FALSE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {149, 4, 30, BOTH, FALSE}
-         ,                     // 5G, ch 149~161
+         ,                     /* 5G, ch 149~161 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Cyprus
+       {                       /* Cyprus */
         "CY",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, IDOR, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 24, IDOR, TRUE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 30, BOTH, TRUE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Czech_Republic
+       {                       /* Czech_Republic */
         "CZ",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, IDOR, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 23, IDOR, TRUE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Denmark
+       {                       /* Denmark */
         "DK",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, IDOR, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 23, IDOR, TRUE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 30, BOTH, TRUE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Dominican Republic
+       {                       /* Dominican Republic */
         "DO",
         CE,
         {
          {1, 0, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 0
+         ,                     /* 2.4 G, ch 0 */
          {149, 4, 20, BOTH, FALSE}
-         ,                     // 5G, ch 149~161
+         ,                     /* 5G, ch 149~161 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Equador
+       {                       /* Equador */
         "EC",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {100, 11, 27, BOTH, FALSE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // El Salvador
+       {                       /* El Salvador */
         "SV",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, IDOR, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 30, BOTH, TRUE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {149, 4, 36, BOTH, TRUE}
-         ,                     // 5G, ch 149~165
+         ,                     /* 5G, ch 149~165 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Finland
+       {                       /* Finland */
         "FI",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, IDOR, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 23, IDOR, TRUE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 30, BOTH, TRUE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // France
+       {                       /* France */
         "FR",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, IDOR, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 23, IDOR, TRUE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Germany
+       {                       /* Germany */
         "DE",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, IDOR, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 23, IDOR, TRUE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 30, BOTH, TRUE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Greece
+       {                       /* Greece */
         "GR",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, IDOR, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 23, IDOR, TRUE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 30, ODOR, TRUE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Guam
+       {                       /* Guam */
         "GU",
         CE,
         {
          {1, 11, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~11
+         ,                     /* 2.4 G, ch 1~11 */
          {36, 4, 17, BOTH, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 24, BOTH, FALSE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 30, BOTH, FALSE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {149, 5, 30, BOTH, FALSE}
-         ,                     // 5G, ch 149~165
+         ,                     /* 5G, ch 149~165 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Guatemala
+       {                       /* Guatemala */
         "GT",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 17, BOTH, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 24, BOTH, FALSE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {149, 4, 30, BOTH, FALSE}
-         ,                     // 5G, ch 149~161
+         ,                     /* 5G, ch 149~161 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Haiti
+       {                       /* Haiti */
         "HT",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 17, BOTH, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 24, BOTH, FALSE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {149, 4, 30, BOTH, FALSE}
-         ,                     // 5G, ch 149~161
+         ,                     /* 5G, ch 149~161 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Honduras
+       {                       /* Honduras */
         "HN",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {149, 4, 27, BOTH, FALSE}
-         ,                     // 5G, ch 149~161
+         ,                     /* 5G, ch 149~161 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Hong Kong
+       {                       /* Hong Kong */
         "HK",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, IDOR, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 23, IDOR, FALSE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {149, 4, 30, BOTH, FALSE}
-         ,                     // 5G, ch 149~161
+         ,                     /* 5G, ch 149~161 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Hungary
+       {                       /* Hungary */
         "HU",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, IDOR, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 23, IDOR, TRUE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Iceland
+       {                       /* Iceland */
         "IS",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, IDOR, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 23, IDOR, TRUE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 30, BOTH, TRUE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // India
+       {                       /* India */
         "IN",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {149, 4, 24, IDOR, FALSE}
-         ,                     // 5G, ch 149~161
+         ,                     /* 5G, ch 149~161 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Indonesia
+       {                       /* Indonesia */
         "ID",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {149, 4, 27, BOTH, FALSE}
-         ,                     // 5G, ch 149~161
+         ,                     /* 5G, ch 149~161 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Ireland
+       {                       /* Ireland */
         "IE",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, IDOR, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 23, IDOR, TRUE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 30, ODOR, TRUE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Israel
+       {                       /* Israel */
         "IL",
         CE,
         {
          {1, 3, 20, IDOR, FALSE}
-         ,                     // 2.4 G, ch 1~3
+         ,                     /* 2.4 G, ch 1~3 */
          {4, 6, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 4~9
+         ,                     /* 2.4 G, ch 4~9 */
          {10, 4, 20, IDOR, FALSE}
-         ,                     // 2.4 G, ch 10~13
+         ,                     /* 2.4 G, ch 10~13 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Italy
+       {                       /* Italy */
         "IT",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, IDOR, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 23, IDOR, TRUE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 30, ODOR, TRUE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Japan
+       {                       /* Japan */
         "JP",
         JAP,
         {
          {1, 14, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~14
+         ,                     /* 2.4 G, ch 1~14 */
          {36, 4, 23, IDOR, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Jordan
+       {                       /* Jordan */
         "JO",
         CE,
         {
          {1, 13, 20, IDOR, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, IDOR, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {149, 4, 23, IDOR, FALSE}
-         ,                     // 5G, ch 149~161
+         ,                     /* 5G, ch 149~161 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Latvia
+       {                       /* Latvia */
         "LV",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, IDOR, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 23, IDOR, TRUE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 30, BOTH, TRUE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Liechtenstein
+       {                       /* Liechtenstein */
         "LI",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {52, 4, 23, IDOR, TRUE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 30, BOTH, TRUE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Lithuania
+       {                       /* Lithuania */
         "LT",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, IDOR, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 23, IDOR, TRUE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 30, BOTH, TRUE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Luxemburg
+       {                       /* Luxemburg */
         "LU",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, IDOR, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 23, IDOR, TRUE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 30, BOTH, TRUE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Malaysia
+       {                       /* Malaysia */
         "MY",
         CE,
         {
          {36, 4, 23, BOTH, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 23, BOTH, FALSE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {149, 5, 20, BOTH, FALSE}
-         ,                     // 5G, ch 149~165
+         ,                     /* 5G, ch 149~165 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Malta
+       {                       /* Malta */
         "MT",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, IDOR, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 23, IDOR, TRUE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 30, BOTH, TRUE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Marocco
+       {                       /* Marocco */
         "MA",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 24, IDOR, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Mexico
+       {                       /* Mexico */
         "MX",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, BOTH, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 24, BOTH, FALSE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {149, 5, 30, IDOR, FALSE}
-         ,                     // 5G, ch 149~165
+         ,                     /* 5G, ch 149~165 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Netherlands
+       {                       /* Netherlands */
         "NL",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, IDOR, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 24, IDOR, TRUE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 30, BOTH, TRUE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // New Zealand
+       {                       /* New Zealand */
         "NZ",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 24, BOTH, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 24, BOTH, FALSE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {149, 4, 30, BOTH, FALSE}
-         ,                     // 5G, ch 149~161
+         ,                     /* 5G, ch 149~161 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Norway
+       {                       /* Norway */
         "NO",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 24, IDOR, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 24, IDOR, TRUE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 30, BOTH, TRUE}
-         ,                     // 5G, ch 149~161
+         ,                     /* 5G, ch 149~161 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Peru
+       {                       /* Peru */
         "PE",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {149, 4, 27, BOTH, FALSE}
-         ,                     // 5G, ch 149~161
+         ,                     /* 5G, ch 149~161 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Portugal
+       {                       /* Portugal */
         "PT",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, IDOR, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 23, IDOR, TRUE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 30, BOTH, TRUE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Poland
+       {                       /* Poland */
         "PL",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, IDOR, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 23, IDOR, TRUE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 30, BOTH, TRUE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Romania
+       {                       /* Romania */
         "RO",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, IDOR, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 23, IDOR, TRUE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 30, BOTH, TRUE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Russia
+       {                       /* Russia */
         "RU",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {149, 4, 20, IDOR, FALSE}
-         ,                     // 5G, ch 149~161
+         ,                     /* 5G, ch 149~161 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Saudi Arabia
+       {                       /* Saudi Arabia */
         "SA",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, BOTH, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 23, BOTH, FALSE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {149, 4, 23, BOTH, FALSE}
-         ,                     // 5G, ch 149~161
+         ,                     /* 5G, ch 149~161 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Serbia_and_Montenegro
+       {                       /* Serbia_and_Montenegro */
         "CS",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Singapore
+       {                       /* Singapore */
         "SG",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, BOTH, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 23, BOTH, FALSE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {149, 4, 20, BOTH, FALSE}
-         ,                     // 5G, ch 149~161
+         ,                     /* 5G, ch 149~161 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Slovakia
+       {                       /* Slovakia */
         "SK",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, IDOR, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 23, IDOR, TRUE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 30, BOTH, TRUE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Slovenia
+       {                       /* Slovenia */
         "SI",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, IDOR, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 23, IDOR, TRUE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // South Africa
+       {                       /* South Africa */
         "ZA",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, BOTH, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 23, IDOR, FALSE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 30, BOTH, TRUE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {149, 4, 30, BOTH, FALSE}
-         ,                     // 5G, ch 149~161
+         ,                     /* 5G, ch 149~161 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // South Korea
+       {                       /* South Korea */
         "KR",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 20, BOTH, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 20, BOTH, FALSE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 8, 20, BOTH, FALSE}
-         ,                     // 5G, ch 100~128
+         ,                     /* 5G, ch 100~128 */
          {149, 4, 20, BOTH, FALSE}
-         ,                     // 5G, ch 149~161
+         ,                     /* 5G, ch 149~161 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Spain
+       {                       /* Spain */
         "ES",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 17, IDOR, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 23, IDOR, TRUE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 30, BOTH, TRUE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Sweden
+       {                       /* Sweden */
         "SE",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, IDOR, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 23, IDOR, TRUE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 30, BOTH, TRUE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Switzerland
+       {                       /* Switzerland */
         "CH",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~13
+         ,                     /* 2.4 G, ch 1~13 */
          {36, 4, 23, IDOR, TRUE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 23, IDOR, TRUE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Taiwan
+       {                       /* Taiwan */
         "TW",
         CE,
         {
          {1, 11, 30, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~11
+         ,                     /* 2.4 G, ch 1~11 */
          {52, 4, 23, IDOR, FALSE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Turkey
+       {                       /* Turkey */
         "TR",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~11
+         ,                     /* 2.4 G, ch 1~11 */
          {36, 4, 23, BOTH, FALSE}
-         ,                     // 5G, ch 36~48
+         ,                     /* 5G, ch 36~48 */
          {52, 4, 23, BOTH, FALSE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // UK
+       {                       /* UK */
         "GB",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~11
+         ,                     /* 2.4 G, ch 1~11 */
          {36, 4, 23, IDOR, FALSE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {52, 4, 23, IDOR, TRUE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 30, BOTH, TRUE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Ukraine
+       {                       /* Ukraine */
         "UA",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~11
+         ,                     /* 2.4 G, ch 1~11 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // United_Arab_Emirates
+       {                       /* United_Arab_Emirates */
         "AE",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~11
+         ,                     /* 2.4 G, ch 1~11 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // United_States
+       {                       /* United_States */
         "US",
         CE,
         {
          {1, 11, 30, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~11
+         ,                     /* 2.4 G, ch 1~11 */
          {36, 4, 17, IDOR, FALSE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {52, 4, 24, BOTH, TRUE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 30, BOTH, TRUE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {149, 5, 30, BOTH, FALSE}
-         ,                     // 5G, ch 149~165
+         ,                     /* 5G, ch 149~165 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Venezuela
+       {                       /* Venezuela */
         "VE",
         CE,
         {
          {1, 13, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~11
+         ,                     /* 2.4 G, ch 1~11 */
          {149, 4, 27, BOTH, FALSE}
-         ,                     // 5G, ch 149~161
+         ,                     /* 5G, ch 149~161 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
 
-       {                       // Default
+       {                       /* Default */
         "",
         CE,
         {
          {1, 11, 20, BOTH, FALSE}
-         ,                     // 2.4 G, ch 1~11
+         ,                     /* 2.4 G, ch 1~11 */
          {36, 4, 20, BOTH, FALSE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {52, 4, 20, BOTH, FALSE}
-         ,                     // 5G, ch 52~64
+         ,                     /* 5G, ch 52~64 */
          {100, 11, 20, BOTH, FALSE}
-         ,                     // 5G, ch 100~140
+         ,                     /* 5G, ch 100~140 */
          {149, 5, 20, BOTH, FALSE}
-         ,                     // 5G, ch 149~165
+         ,                     /* 5G, ch 149~165 */
          {0}
-         ,                     // end
+         ,                     /* end */
          }
         }
        ,
@@ -1610,7 +1610,7 @@ static UCHAR GetExtCh(IN UCHAR Channel, IN UCHAR Direction)
 
 VOID N_ChannelCheck(IN PRTMP_ADAPTER pAd)
 {
-       //UCHAR ChannelNum = pAd->ChannelListNum;
+       /*UCHAR ChannelNum = pAd->ChannelListNum; */
        UCHAR Channel = pAd->CommonCfg.Channel;
 
        if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
@@ -1663,7 +1663,7 @@ VOID N_ChannelCheck(IN PRTMP_ADAPTER pAd)
                        if (Channel == 14) {
                                pAd->CommonCfg.RegTransmitSetting.field.BW =
                                    BW_20;
-                               //pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_NONE; // We didn't set the ExtCh as NONE due to it'll set in RTMPSetHT()
+                               /*pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_NONE; // We didn't set the ExtCh as NONE due to it'll set in RTMPSetHT() */
                        }
                }
        }
index b6e47a1..8b5be17 100644 (file)
@@ -172,7 +172,7 @@ VOID RtmpChipOpsRFHook(IN RTMP_ADAPTER * pAd)
                                    RT30xxReverseRFSleepModeSetup;
                        }
                }
-#endif // RT3070 //
+#endif /* RT3070 // */
 #ifdef RT3090
                if (IS_RT3090(pAd) && (pAd->infType == RTMP_DEV_INF_PCI)) {
                        pChipOps->AsicRfTurnOff = RT30xxLoadRFSleepModeSetup;
@@ -180,9 +180,9 @@ VOID RtmpChipOpsRFHook(IN RTMP_ADAPTER * pAd)
                        pChipOps->AsicReverseRfFromSleepMode =
                            RT30xxReverseRFSleepModeSetup;
                }
-#endif // RT3090 //
+#endif /* RT3090 // */
        }
-#endif // RT30xx //
+#endif /* RT30xx // */
 }
 
-#endif // RTMP_RF_RW_SUPPORT //
+#endif /* RTMP_RF_RW_SUPPORT // */
index c169641..0a95870 100644 (file)
@@ -40,32 +40,32 @@ UCHAR BIT8[] = { 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80 };
 char *CipherName[] =
     { "none", "wep64", "wep128", "TKIP", "AES", "CKIP64", "CKIP128" };
 
-//
-// BBP register initialization set
-//
+/* */
+/* BBP register initialization set */
+/* */
 REG_PAIR BBPRegTable[] = {
-       {BBP_R65, 0x2C},        // fix rssi issue
-       {BBP_R66, 0x38},        // Also set this default value to pAd->BbpTuning.R66CurrentValue at initial
+       {BBP_R65, 0x2C},        /* fix rssi issue */
+       {BBP_R66, 0x38},        /* Also set this default value to pAd->BbpTuning.R66CurrentValue at initial */
        {BBP_R69, 0x12},
-       {BBP_R70, 0xa},         // BBP_R70 will change to 0x8 in ApStartUp and LinkUp for rt2860C, otherwise value is 0xa
+       {BBP_R70, 0xa},         /* BBP_R70 will change to 0x8 in ApStartUp and LinkUp for rt2860C, otherwise value is 0xa */
        {BBP_R73, 0x10},
        {BBP_R81, 0x37},
        {BBP_R82, 0x62},
        {BBP_R83, 0x6A},
-       {BBP_R84, 0x99},        // 0x19 is for rt2860E and after. This is for extension channel overlapping IOT. 0x99 is for rt2860D and before
-       {BBP_R86, 0x00},        // middle range issue, Rory @2008-01-28
-       {BBP_R91, 0x04},        // middle range issue, Rory @2008-01-28
-       {BBP_R92, 0x00},        // middle range issue, Rory @2008-01-28
-       {BBP_R103, 0x00},       // near range high-power issue, requested from Gary @2008-0528
-       {BBP_R105, 0x05},       // 0x05 is for rt2860E to turn on FEQ control. It is safe for rt2860D and before, because Bit 7:2 are reserved in rt2860D and before.
-       {BBP_R106, 0x35},       // for ShortGI throughput
+       {BBP_R84, 0x99},        /* 0x19 is for rt2860E and after. This is for extension channel overlapping IOT. 0x99 is for rt2860D and before */
+       {BBP_R86, 0x00},        /* middle range issue, Rory @2008-01-28 */
+       {BBP_R91, 0x04},        /* middle range issue, Rory @2008-01-28 */
+       {BBP_R92, 0x00},        /* middle range issue, Rory @2008-01-28 */
+       {BBP_R103, 0x00},       /* near range high-power issue, requested from Gary @2008-0528 */
+       {BBP_R105, 0x05},       /* 0x05 is for rt2860E to turn on FEQ control. It is safe for rt2860D and before, because Bit 7:2 are reserved in rt2860D and before. */
+       {BBP_R106, 0x35},       /* for ShortGI throughput */
 };
 
 #define        NUM_BBP_REG_PARMS       (sizeof(BBPRegTable) / sizeof(REG_PAIR))
 
-//
-// ASIC register initialization sets
-//
+/* */
+/* ASIC register initialization sets */
+/* */
 
 RTMP_REG_PAIR MACRegTable[] = {
 #if defined(HW_BEACON_OFFSET) && (HW_BEACON_OFFSET == 0x200)
@@ -76,43 +76,43 @@ RTMP_REG_PAIR MACRegTable[] = {
        {BCN_OFFSET1, 0xfcf8f4f0},      /* 0x3800, 0x3A00, 0x3C00, 0x3E00, 512B for each beacon */
 #else
 #error You must re-calculate new value for BCN_OFFSET0 & BCN_OFFSET1 in MACRegTable[]!!!
-#endif // HW_BEACON_OFFSET //
-
-       {LEGACY_BASIC_RATE, 0x0000013f},        //  Basic rate set bitmap
-       {HT_BASIC_RATE, 0x00008003},    // Basic HT rate set , 20M, MCS=3, MM. Format is the same as in TXWI.
-       {MAC_SYS_CTRL, 0x00},   // 0x1004, , default Disable RX
-       {RX_FILTR_CFG, 0x17f97},        //0x1400  , RX filter control,
-       {BKOFF_SLOT_CFG, 0x209},        // default set short slot time, CC_DELAY_TIME should be 2
-       //{TX_SW_CFG0,          0x40a06}, // Gary,2006-08-23
-       {TX_SW_CFG0, 0x0},      // Gary,2008-05-21 for CWC test
-       {TX_SW_CFG1, 0x80606},  // Gary,2006-08-23
-       {TX_LINK_CFG, 0x1020},  // Gary,2006-08-23
-       //{TX_TIMEOUT_CFG,      0x00182090},    // CCK has some problem. So increase timieout value. 2006-10-09// MArvek RT
-       {TX_TIMEOUT_CFG, 0x000a2090},   // CCK has some problem. So increase timieout value. 2006-10-09// MArvek RT , Modify for 2860E ,2007-08-01
-       {MAX_LEN_CFG, MAX_AGGREGATION_SIZE | 0x00001000},       // 0x3018, MAX frame length. Max PSDU = 16kbytes.
-       {LED_CFG, 0x7f031e46},  // Gary, 2006-08-23
-
-       {PBF_MAX_PCNT, 0x1F3FBF9F},     //0x1F3f7f9f},          //Jan, 2006/04/20
-
-       {TX_RTY_CFG, 0x47d01f0f},       // Jan, 2006/11/16, Set TxWI->ACK =0 in Probe Rsp Modify for 2860E ,2007-08-03
-
-       {AUTO_RSP_CFG, 0x00000013},     // Initial Auto_Responder, because QA will turn off Auto-Responder
-       {CCK_PROT_CFG, 0x05740003 /*0x01740003 */ },    // Initial Auto_Responder, because QA will turn off Auto-Responder. And RTS threshold is enabled.
-       {OFDM_PROT_CFG, 0x05740003 /*0x01740003 */ },   // Initial Auto_Responder, because QA will turn off Auto-Responder. And RTS threshold is enabled.
+#endif /* HW_BEACON_OFFSET // */
+
+       {LEGACY_BASIC_RATE, 0x0000013f},        /*  Basic rate set bitmap */
+       {HT_BASIC_RATE, 0x00008003},    /* Basic HT rate set , 20M, MCS=3, MM. Format is the same as in TXWI. */
+       {MAC_SYS_CTRL, 0x00},   /* 0x1004, , default Disable RX */
+       {RX_FILTR_CFG, 0x17f97},        /*0x1400  , RX filter control, */
+       {BKOFF_SLOT_CFG, 0x209},        /* default set short slot time, CC_DELAY_TIME should be 2 */
+       /*{TX_SW_CFG0,          0x40a06}, // Gary,2006-08-23 */
+       {TX_SW_CFG0, 0x0},      /* Gary,2008-05-21 for CWC test */
+       {TX_SW_CFG1, 0x80606},  /* Gary,2006-08-23 */
+       {TX_LINK_CFG, 0x1020},  /* Gary,2006-08-23 */
+       /*{TX_TIMEOUT_CFG,      0x00182090},    // CCK has some problem. So increase timieout value. 2006-10-09// MArvek RT */
+       {TX_TIMEOUT_CFG, 0x000a2090},   /* CCK has some problem. So increase timieout value. 2006-10-09// MArvek RT , Modify for 2860E ,2007-08-01 */
+       {MAX_LEN_CFG, MAX_AGGREGATION_SIZE | 0x00001000},       /* 0x3018, MAX frame length. Max PSDU = 16kbytes. */
+       {LED_CFG, 0x7f031e46},  /* Gary, 2006-08-23 */
+
+       {PBF_MAX_PCNT, 0x1F3FBF9F},     /*0x1F3f7f9f},          //Jan, 2006/04/20 */
+
+       {TX_RTY_CFG, 0x47d01f0f},       /* Jan, 2006/11/16, Set TxWI->ACK =0 in Probe Rsp Modify for 2860E ,2007-08-03 */
+
+       {AUTO_RSP_CFG, 0x00000013},     /* Initial Auto_Responder, because QA will turn off Auto-Responder */
+       {CCK_PROT_CFG, 0x05740003 /*0x01740003 */ },    /* Initial Auto_Responder, because QA will turn off Auto-Responder. And RTS threshold is enabled. */
+       {OFDM_PROT_CFG, 0x05740003 /*0x01740003 */ },   /* Initial Auto_Responder, because QA will turn off Auto-Responder. And RTS threshold is enabled. */
 #ifdef RTMP_MAC_USB
-       {PBF_CFG, 0xf40006},    // Only enable Queue 2
-       {MM40_PROT_CFG, 0x3F44084},     // Initial Auto_Responder, because QA will turn off Auto-Responder
+       {PBF_CFG, 0xf40006},    /* Only enable Queue 2 */
+       {MM40_PROT_CFG, 0x3F44084},     /* Initial Auto_Responder, because QA will turn off Auto-Responder */
        {WPDMA_GLO_CFG, 0x00000030},
-#endif // RTMP_MAC_USB //
-       {GF20_PROT_CFG, 0x01744004},    // set 19:18 --> Short NAV for MIMO PS
+#endif /* RTMP_MAC_USB // */
+       {GF20_PROT_CFG, 0x01744004},    /* set 19:18 --> Short NAV for MIMO PS */
        {GF40_PROT_CFG, 0x03F44084},
        {MM20_PROT_CFG, 0x01744004},
 #ifdef RTMP_MAC_PCI
        {MM40_PROT_CFG, 0x03F54084},
-#endif // RTMP_MAC_PCI //
-       {TXOP_CTRL_CFG, 0x0000583f, /*0x0000243f *//*0x000024bf */ },   //Extension channel backoff.
+#endif /* RTMP_MAC_PCI // */
+       {TXOP_CTRL_CFG, 0x0000583f, /*0x0000243f *//*0x000024bf */ },   /*Extension channel backoff. */
        {TX_RTS_CFG, 0x00092b20},
-       {EXP_ACK_TIME, 0x002400ca},     // default value
+       {EXP_ACK_TIME, 0x002400ca},     /* default value */
 
        {TXOP_HLDR_ET, 0x00000002},
 
@@ -121,7 +121,7 @@ RTMP_REG_PAIR MACRegTable[] = {
           and beacon1 is SIFS (10us), so if INTEL 2200bg card connects to BSS0, the ping
           will always lost. So we change the SIFS of CCK from 10us to 16us. */
        {XIFS_TIME_CFG, 0x33a41010},
-       {PWR_PIN_CFG, 0x00000003},      // patch for 2880-E
+       {PWR_PIN_CFG, 0x00000003},      /* patch for 2880-E */
 };
 
 RTMP_REG_PAIR STAMACRegTable[] = {
@@ -165,7 +165,7 @@ NDIS_STATUS RTMPAllocAdapterBlock(IN PVOID handle,
        *ppAdapter = NULL;
 
        do {
-               // Allocate RTMP_ADAPTER memory block
+               /* Allocate RTMP_ADAPTER memory block */
                pBeaconBuf = kmalloc(MAX_BEACON_SIZE, MEM_ALLOC_FLAG);
                if (pBeaconBuf == NULL) {
                        Status = NDIS_STATUS_FAILURE;
@@ -184,14 +184,14 @@ NDIS_STATUS RTMPAllocAdapterBlock(IN PVOID handle,
                         ("\n\n=== pAd = %p, size = %d ===\n\n", pAd,
                          (UINT32) sizeof(RTMP_ADAPTER)));
 
-               // Init spin locks
+               /* Init spin locks */
                NdisAllocateSpinLock(&pAd->MgmtRingLock);
 #ifdef RTMP_MAC_PCI
                NdisAllocateSpinLock(&pAd->RxRingLock);
 #ifdef RT3090
                NdisAllocateSpinLock(&pAd->McuCmdLock);
-#endif // RT3090 //
-#endif // RTMP_MAC_PCI //
+#endif /* RT3090 // */
+#endif /* RTMP_MAC_PCI // */
 
                for (index = 0; index < NUM_OF_TX_RING; index++) {
                        NdisAllocateSpinLock(&pAd->TxSwQueueLock[index]);
@@ -238,9 +238,9 @@ VOID RTMPReadTxPwrPerRate(IN PRTMP_ADAPTER pAd)
        UCHAR t1, t2, t3, t4;
        BOOLEAN bApwrdeltaMinus = TRUE, bGpwrdeltaMinus = TRUE;
 
-       //
-       // Get power delta for 20MHz and 40MHz.
-       //
+       /* */
+       /* Get power delta for 20MHz and 40MHz. */
+       /* */
        DBGPRINT(RT_DEBUG_TRACE, ("Txpower per Rate\n"));
        RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_DELTA, value2);
        Apwrdelta = 0;
@@ -267,9 +267,9 @@ VOID RTMPReadTxPwrPerRate(IN PRTMP_ADAPTER pAd)
        DBGPRINT(RT_DEBUG_TRACE,
                 ("Gpwrdelta = %x, Apwrdelta = %x .\n", Gpwrdelta, Apwrdelta));
 
-       //
-       // Get Txpower per MCS for 20MHz in 2.4G.
-       //
+       /* */
+       /* Get Txpower per MCS for 20MHz in 2.4G. */
+       /* */
        for (i = 0; i < 5; i++) {
                RT28xx_EEPROM_READ16(pAd,
                                     EEPROM_TXPOWER_BYRATE_20MHZ_2_4G + i * 4,
@@ -447,12 +447,12 @@ VOID RTMPReadChannelPwr(IN PRTMP_ADAPTER pAd)
        EEPROM_TX_PWR_STRUC Power;
        EEPROM_TX_PWR_STRUC Power2;
 
-       // Read Tx power value for all channels
-       // Value from 1 - 0x7f. Default value is 24.
-       // Power value : 2.4G 0x00 (0) ~ 0x1F (31)
-       //             : 5.5G 0xF9 (-7) ~ 0x0F (15)
+       /* Read Tx power value for all channels */
+       /* Value from 1 - 0x7f. Default value is 24. */
+       /* Power value : 2.4G 0x00 (0) ~ 0x1F (31) */
+       /*             : 5.5G 0xF9 (-7) ~ 0x0F (15) */
 
-       // 0. 11b/g, ch1 - ch 14
+       /* 0. 11b/g, ch1 - ch 14 */
        for (i = 0; i < 7; i++) {
                RT28xx_EEPROM_READ16(pAd, EEPROM_G_TX_PWR_OFFSET + i * 2,
                                     Power.word);
@@ -482,8 +482,8 @@ VOID RTMPReadChannelPwr(IN PRTMP_ADAPTER pAd)
                        pAd->TxPower[i * 2 + 1].Power2 = Power2.field.Byte1;
        }
 
-       // 1. U-NII lower/middle band: 36, 38, 40; 44, 46, 48; 52, 54, 56; 60, 62, 64 (including central frequency in BW 40MHz)
-       // 1.1 Fill up channel
+       /* 1. U-NII lower/middle band: 36, 38, 40; 44, 46, 48; 52, 54, 56; 60, 62, 64 (including central frequency in BW 40MHz) */
+       /* 1.1 Fill up channel */
        choffset = 14;
        for (i = 0; i < 4; i++) {
                pAd->TxPower[3 * i + choffset + 0].Channel = 36 + i * 8 + 0;
@@ -499,7 +499,7 @@ VOID RTMPReadChannelPwr(IN PRTMP_ADAPTER pAd)
                pAd->TxPower[3 * i + choffset + 2].Power2 = DEFAULT_RF_TX_POWER;
        }
 
-       // 1.2 Fill up power
+       /* 1.2 Fill up power */
        for (i = 0; i < 6; i++) {
                RT28xx_EEPROM_READ16(pAd, EEPROM_A_TX_PWR_OFFSET + i * 2,
                                     Power.word);
@@ -523,8 +523,8 @@ VOID RTMPReadChannelPwr(IN PRTMP_ADAPTER pAd)
                            Power2.field.Byte1;
        }
 
-       // 2. HipperLAN 2 100, 102 ,104; 108, 110, 112; 116, 118, 120; 124, 126, 128; 132, 134, 136; 140 (including central frequency in BW 40MHz)
-       // 2.1 Fill up channel
+       /* 2. HipperLAN 2 100, 102 ,104; 108, 110, 112; 116, 118, 120; 124, 126, 128; 132, 134, 136; 140 (including central frequency in BW 40MHz) */
+       /* 2.1 Fill up channel */
        choffset = 14 + 12;
        for (i = 0; i < 5; i++) {
                pAd->TxPower[3 * i + choffset + 0].Channel = 100 + i * 8 + 0;
@@ -543,7 +543,7 @@ VOID RTMPReadChannelPwr(IN PRTMP_ADAPTER pAd)
        pAd->TxPower[3 * 5 + choffset + 0].Power = DEFAULT_RF_TX_POWER;
        pAd->TxPower[3 * 5 + choffset + 0].Power2 = DEFAULT_RF_TX_POWER;
 
-       // 2.2 Fill up power
+       /* 2.2 Fill up power */
        for (i = 0; i < 8; i++) {
                RT28xx_EEPROM_READ16(pAd,
                                     EEPROM_A_TX_PWR_OFFSET + (choffset - 14) +
@@ -569,8 +569,8 @@ VOID RTMPReadChannelPwr(IN PRTMP_ADAPTER pAd)
                            Power2.field.Byte1;
        }
 
-       // 3. U-NII upper band: 149, 151, 153; 157, 159, 161; 165, 167, 169; 171, 173 (including central frequency in BW 40MHz)
-       // 3.1 Fill up channel
+       /* 3. U-NII upper band: 149, 151, 153; 157, 159, 161; 165, 167, 169; 171, 173 (including central frequency in BW 40MHz) */
+       /* 3.1 Fill up channel */
        choffset = 14 + 12 + 16;
        /*for (i = 0; i < 2; i++) */
        for (i = 0; i < 3; i++) {
@@ -594,7 +594,7 @@ VOID RTMPReadChannelPwr(IN PRTMP_ADAPTER pAd)
        pAd->TxPower[3 * 3 + choffset + 1].Power = DEFAULT_RF_TX_POWER;
        pAd->TxPower[3 * 3 + choffset + 1].Power2 = DEFAULT_RF_TX_POWER;
 
-       // 3.2 Fill up power
+       /* 3.2 Fill up power */
        /*for (i = 0; i < 4; i++) */
        for (i = 0; i < 6; i++) {
                RT28xx_EEPROM_READ16(pAd,
@@ -621,7 +621,7 @@ VOID RTMPReadChannelPwr(IN PRTMP_ADAPTER pAd)
                            Power2.field.Byte1;
        }
 
-       // 4. Print and Debug
+       /* 4. Print and Debug */
        /*choffset = 14 + 12 + 16 + 7; */
        choffset = 14 + 12 + 16 + 11;
 
@@ -691,21 +691,21 @@ VOID NICReadEEPROMParameters(IN PRTMP_ADAPTER pAd, IN PUCHAR mac_addr)
        if (pAd->chipOps.eeinit)
                pAd->chipOps.eeinit(pAd);
 
-       // Init EEPROM Address Number, before access EEPROM; if 93c46, EEPROMAddressNum=6, else if 93c66, EEPROMAddressNum=8
+       /* Init EEPROM Address Number, before access EEPROM; if 93c46, EEPROMAddressNum=6, else if 93c66, EEPROMAddressNum=8 */
        RTMP_IO_READ32(pAd, E2PROM_CSR, &data);
        DBGPRINT(RT_DEBUG_TRACE, ("--> E2PROM_CSR = 0x%x\n", data));
 
        if ((data & 0x30) == 0)
-               pAd->EEPROMAddressNum = 6;      // 93C46
+               pAd->EEPROMAddressNum = 6;      /* 93C46 */
        else if ((data & 0x30) == 0x10)
-               pAd->EEPROMAddressNum = 8;      // 93C66
+               pAd->EEPROMAddressNum = 8;      /* 93C66 */
        else
-               pAd->EEPROMAddressNum = 8;      // 93C86
+               pAd->EEPROMAddressNum = 8;      /* 93C86 */
        DBGPRINT(RT_DEBUG_TRACE,
                 ("--> EEPROMAddressNum = %d\n", pAd->EEPROMAddressNum));
 
-       // RT2860 MAC no longer auto load MAC address from E2PROM. Driver has to intialize
-       // MAC address registers according to E2PROM setting
+       /* RT2860 MAC no longer auto load MAC address from E2PROM. Driver has to intialize */
+       /* MAC address registers according to E2PROM setting */
        if (mac_addr == NULL ||
            strlen((PSTRING) mac_addr) != 17 ||
            mac_addr[2] != ':' || mac_addr[5] != ':' || mac_addr[8] != ':' ||
@@ -741,12 +741,12 @@ VOID NICReadEEPROMParameters(IN PRTMP_ADAPTER pAd, IN PUCHAR mac_addr)
        }
 
        {
-               //more conveninet to test mbssid, so ap's bssid &0xf1
+               /*more conveninet to test mbssid, so ap's bssid &0xf1 */
                if (pAd->PermanentAddress[0] == 0xff)
                        pAd->PermanentAddress[0] = RandomByte(pAd) & 0xf8;
 
-               //if (pAd->PermanentAddress[5] == 0xff)
-               //      pAd->PermanentAddress[5] = RandomByte(pAd)&0xf8;
+               /*if (pAd->PermanentAddress[5] == 0xff) */
+               /*      pAd->PermanentAddress[5] = RandomByte(pAd)&0xf8; */
 
                DBGPRINT_RAW(RT_DEBUG_TRACE,
                             ("E2PROM MAC: =%02x:%02x:%02x:%02x:%02x:%02x\n",
@@ -777,12 +777,12 @@ VOID NICReadEEPROMParameters(IN PRTMP_ADAPTER pAd, IN PUCHAR mac_addr)
                }
        }
 
-       // if not return early. cause fail at emulation.
-       // Init the channel number for TX channel power
+       /* if not return early. cause fail at emulation. */
+       /* Init the channel number for TX channel power */
        RTMPReadChannelPwr(pAd);
 
-       // if E2PROM version mismatch with driver's expectation, then skip
-       // all subsequent E2RPOM retieval and set a system error bit to notify GUI
+       /* if E2PROM version mismatch with driver's expectation, then skip */
+       /* all subsequent E2RPOM retieval and set a system error bit to notify GUI */
        RT28xx_EEPROM_READ16(pAd, EEPROM_VERSION_OFFSET, Version.word);
        pAd->EepromVersion =
            Version.field.Version + Version.field.FaeReleaseNumber * 256;
@@ -811,14 +811,14 @@ VOID NICReadEEPROMParameters(IN PRTMP_ADAPTER pAd, IN PUCHAR mac_addr)
                   pAd->EEPROMDefaultValue[i] = 0xffff;
                   return;  */
        }
-       // Read BBP default value from EEPROM and store to array(EEPROMDefaultValue) in pAd
+       /* Read BBP default value from EEPROM and store to array(EEPROMDefaultValue) in pAd */
        RT28xx_EEPROM_READ16(pAd, EEPROM_NIC1_OFFSET, value);
        pAd->EEPROMDefaultValue[0] = value;
 
        RT28xx_EEPROM_READ16(pAd, EEPROM_NIC2_OFFSET, value);
        pAd->EEPROMDefaultValue[1] = value;
 
-       RT28xx_EEPROM_READ16(pAd, 0x38, value); // Country Region
+       RT28xx_EEPROM_READ16(pAd, 0x38, value); /* Country Region */
        pAd->EEPROMDefaultValue[2] = value;
 
        for (i = 0; i < 8; i++) {
@@ -827,10 +827,10 @@ VOID NICReadEEPROMParameters(IN PRTMP_ADAPTER pAd, IN PUCHAR mac_addr)
                pAd->EEPROMDefaultValue[i + 3] = value;
        }
 
-       // We have to parse NIC configuration 0 at here.
-       // If TSSI did not have preloaded value, it should reset the TxAutoAgc to false
-       // Therefore, we have to read TxAutoAgc control beforehand.
-       // Read Tx AGC control bit
+       /* We have to parse NIC configuration 0 at here. */
+       /* If TSSI did not have preloaded value, it should reset the TxAutoAgc to false */
+       /* Therefore, we have to read TxAutoAgc control beforehand. */
+       /* Read Tx AGC control bit */
        Antenna.word = pAd->EEPROMDefaultValue[0];
        if (Antenna.word == 0xFFFF) {
 #ifdef RT30xx
@@ -840,7 +840,7 @@ VOID NICReadEEPROMParameters(IN PRTMP_ADAPTER pAd, IN PUCHAR mac_addr)
                        Antenna.field.TxPath = 1;
                        Antenna.field.RxPath = 1;
                } else
-#endif // RT30xx //
+#endif /* RT30xx // */
                {
 
                        Antenna.word = 0;
@@ -852,7 +852,7 @@ VOID NICReadEEPROMParameters(IN PRTMP_ADAPTER pAd, IN PUCHAR mac_addr)
                                  Antenna.word));
                }
        }
-       // Choose the desired Tx&Rx stream.
+       /* Choose the desired Tx&Rx stream. */
        if ((pAd->CommonCfg.TxStream == 0)
            || (pAd->CommonCfg.TxStream > Antenna.field.TxPath))
                pAd->CommonCfg.TxStream = Antenna.field.TxPath;
@@ -863,13 +863,13 @@ VOID NICReadEEPROMParameters(IN PRTMP_ADAPTER pAd, IN PUCHAR mac_addr)
 
                if ((pAd->MACVersion < RALINK_2883_VERSION) &&
                    (pAd->CommonCfg.RxStream > 2)) {
-                       // only 2 Rx streams for RT2860 series
+                       /* only 2 Rx streams for RT2860 series */
                        pAd->CommonCfg.RxStream = 2;
                }
        }
-       // 3*3
-       // read value from EEPROM and set them to CSR174 ~ 177 in chain0 ~ chain2
-       // yet implement
+       /* 3*3 */
+       /* read value from EEPROM and set them to CSR174 ~ 177 in chain0 ~ chain2 */
+       /* yet implement */
        for (i = 0; i < 3; i++) {
        }
 
@@ -894,25 +894,25 @@ VOID NICReadEEPROMParameters(IN PRTMP_ADAPTER pAd, IN PUCHAR mac_addr)
                     ("NICReadEEPROMParameters: RxPath = %d, TxPath = %d\n",
                      Antenna.field.RxPath, Antenna.field.TxPath));
 
-       // Save the antenna for future use
+       /* Save the antenna for future use */
        pAd->Antenna.word = Antenna.word;
 
-       // Set the RfICType here, then we can initialize RFIC related operation callbacks
+       /* Set the RfICType here, then we can initialize RFIC related operation callbacks */
        pAd->Mlme.RealRxPath = (UCHAR) Antenna.field.RxPath;
        pAd->RfIcType = (UCHAR) Antenna.field.RfIcType;
 
 #ifdef RTMP_RF_RW_SUPPORT
        RtmpChipOpsRFHook(pAd);
-#endif // RTMP_RF_RW_SUPPORT //
+#endif /* RTMP_RF_RW_SUPPORT // */
 
 #ifdef RTMP_MAC_PCI
        sprintf((PSTRING) pAd->nickname, "RT2860STA");
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
-       //
-       // Reset PhyMode if we don't support 802.11a
-       // Only RFIC_2850 & RFIC_2750 support 802.11a
-       //
+       /* */
+       /* Reset PhyMode if we don't support 802.11a */
+       /* Only RFIC_2850 & RFIC_2750 support 802.11a */
+       /* */
        if ((Antenna.field.RfIcType != RFIC_2850)
            && (Antenna.field.RfIcType != RFIC_2750)
            && (Antenna.field.RfIcType != RFIC_3052)) {
@@ -925,8 +925,8 @@ VOID NICReadEEPROMParameters(IN PRTMP_ADAPTER pAd, IN PUCHAR mac_addr)
                         (pAd->CommonCfg.PhyMode == PHY_11N_5G))
                        pAd->CommonCfg.PhyMode = PHY_11BGN_MIXED;
        }
-       // Read TSSI reference and TSSI boundary for temperature compensation. This is ugly
-       // 0. 11b/g
+       /* Read TSSI reference and TSSI boundary for temperature compensation. This is ugly */
+       /* 0. 11b/g */
        {
                /* these are tempature reference value (0x00 ~ 0xFE)
                   ex: 0x00 0x15 0x25 0x45 0x88 0xA0 0xB5 0xD0 0xF0
@@ -951,7 +951,7 @@ VOID NICReadEEPROMParameters(IN PRTMP_ADAPTER pAd, IN PUCHAR mac_addr)
                pAd->TssiMinusBoundaryG[0] = pAd->TssiRefG;
                pAd->TssiPlusBoundaryG[0] = pAd->TssiRefG;
 
-               // Disable TxAgc if the based value is not right
+               /* Disable TxAgc if the based value is not right */
                if (pAd->TssiRefG == 0xff)
                        pAd->bAutoTxAgcG = FALSE;
 
@@ -965,7 +965,7 @@ VOID NICReadEEPROMParameters(IN PRTMP_ADAPTER pAd, IN PUCHAR mac_addr)
                          pAd->TssiPlusBoundaryG[3], pAd->TssiPlusBoundaryG[4],
                          pAd->TxAgcStepG, pAd->bAutoTxAgcG));
        }
-       // 1. 11a
+       /* 1. 11a */
        {
                RT28xx_EEPROM_READ16(pAd, 0xD4, Power.word);
                pAd->TssiMinusBoundaryA[4] = Power.field.Byte0;
@@ -986,7 +986,7 @@ VOID NICReadEEPROMParameters(IN PRTMP_ADAPTER pAd, IN PUCHAR mac_addr)
                pAd->TssiMinusBoundaryA[0] = pAd->TssiRefA;
                pAd->TssiPlusBoundaryA[0] = pAd->TssiRefA;
 
-               // Disable TxAgc if the based value is not right
+               /* Disable TxAgc if the based value is not right */
                if (pAd->TssiRefA == 0xff)
                        pAd->bAutoTxAgcA = FALSE;
 
@@ -1002,7 +1002,7 @@ VOID NICReadEEPROMParameters(IN PRTMP_ADAPTER pAd, IN PUCHAR mac_addr)
        }
        pAd->BbpRssiToDbmDelta = 0x0;
 
-       // Read frequency offset setting for RF
+       /* Read frequency offset setting for RF */
        RT28xx_EEPROM_READ16(pAd, EEPROM_FREQ_OFFSET, value);
        if ((value & 0x00FF) != 0x00FF)
                pAd->RfFreqOffset = (ULONG) (value & 0x00FF);
@@ -1011,9 +1011,9 @@ VOID NICReadEEPROMParameters(IN PRTMP_ADAPTER pAd, IN PUCHAR mac_addr)
        DBGPRINT(RT_DEBUG_TRACE,
                 ("E2PROM: RF FreqOffset=0x%lx \n", pAd->RfFreqOffset));
 
-       //CountryRegion byte offset (38h)
-       value = pAd->EEPROMDefaultValue[2] >> 8;        // 2.4G band
-       value2 = pAd->EEPROMDefaultValue[2] & 0x00FF;   // 5G band
+       /*CountryRegion byte offset (38h) */
+       value = pAd->EEPROMDefaultValue[2] >> 8;        /* 2.4G band */
+       value2 = pAd->EEPROMDefaultValue[2] & 0x00FF;   /* 5G band */
 
        if ((value <= REGION_MAXIMUM_BG_BAND)
            && (value2 <= REGION_MAXIMUM_A_BAND)) {
@@ -1024,10 +1024,10 @@ VOID NICReadEEPROMParameters(IN PRTMP_ADAPTER pAd, IN PUCHAR mac_addr)
                RTMPSetPhyMode(pAd, TmpPhy);
                SetCommonHT(pAd);
        }
-       //
-       // Get RSSI Offset on EEPROM 0x9Ah & 0x9Ch.
-       // The valid value are (-10 ~ 10)
-       //
+       /* */
+       /* Get RSSI Offset on EEPROM 0x9Ah & 0x9Ch. */
+       /* The valid value are (-10 ~ 10) */
+       /* */
        RT28xx_EEPROM_READ16(pAd, EEPROM_RSSI_BG_OFFSET, value);
        pAd->BGRssiOffset0 = value & 0x00ff;
        pAd->BGRssiOffset1 = (value >> 8);
@@ -1038,15 +1038,15 @@ VOID NICReadEEPROMParameters(IN PRTMP_ADAPTER pAd, IN PUCHAR mac_addr)
        pAd->BLNAGain = value & 0x00ff;
        pAd->ALNAGain0 = (value >> 8);
 
-       // Validate 11b/g RSSI_0 offset.
+       /* Validate 11b/g RSSI_0 offset. */
        if ((pAd->BGRssiOffset0 < -10) || (pAd->BGRssiOffset0 > 10))
                pAd->BGRssiOffset0 = 0;
 
-       // Validate 11b/g RSSI_1 offset.
+       /* Validate 11b/g RSSI_1 offset. */
        if ((pAd->BGRssiOffset1 < -10) || (pAd->BGRssiOffset1 > 10))
                pAd->BGRssiOffset1 = 0;
 
-       // Validate 11b/g RSSI_2 offset.
+       /* Validate 11b/g RSSI_2 offset. */
        if ((pAd->BGRssiOffset2 < -10) || (pAd->BGRssiOffset2 > 10))
                pAd->BGRssiOffset2 = 0;
 
@@ -1062,25 +1062,25 @@ VOID NICReadEEPROMParameters(IN PRTMP_ADAPTER pAd, IN PUCHAR mac_addr)
        if (((UCHAR) pAd->ALNAGain2 == 0xFF) || (pAd->ALNAGain2 == 0x00))
                pAd->ALNAGain2 = pAd->ALNAGain0;
 
-       // Validate 11a RSSI_0 offset.
+       /* Validate 11a RSSI_0 offset. */
        if ((pAd->ARssiOffset0 < -10) || (pAd->ARssiOffset0 > 10))
                pAd->ARssiOffset0 = 0;
 
-       // Validate 11a RSSI_1 offset.
+       /* Validate 11a RSSI_1 offset. */
        if ((pAd->ARssiOffset1 < -10) || (pAd->ARssiOffset1 > 10))
                pAd->ARssiOffset1 = 0;
 
-       //Validate 11a RSSI_2 offset.
+       /*Validate 11a RSSI_2 offset. */
        if ((pAd->ARssiOffset2 < -10) || (pAd->ARssiOffset2 > 10))
                pAd->ARssiOffset2 = 0;
 
 #ifdef RT30xx
-       //
-       // Get TX mixer gain setting
-       // 0xff are invalid value
-       // Note: RT30xX default value is 0x00 and will program to RF_R17 only when this value is not zero.
-       //       RT359X default value is 0x02
-       //
+       /* */
+       /* Get TX mixer gain setting */
+       /* 0xff are invalid value */
+       /* Note: RT30xX default value is 0x00 and will program to RF_R17 only when this value is not zero. */
+       /*       RT359X default value is 0x02 */
+       /* */
        if (IS_RT30xx(pAd) || IS_RT3572(pAd)) {
                RT28xx_EEPROM_READ16(pAd, EEPROM_TXMIXER_GAIN_2_4G, value);
                pAd->TxMixerGain24G = 0;
@@ -1090,11 +1090,11 @@ VOID NICReadEEPROMParameters(IN PRTMP_ADAPTER pAd, IN PUCHAR mac_addr)
                        pAd->TxMixerGain24G = (UCHAR) value;
                }
        }
-#endif // RT30xx //
+#endif /* RT30xx // */
 
-       //
-       // Get LED Setting.
-       //
+       /* */
+       /* Get LED Setting. */
+       /* */
        RT28xx_EEPROM_READ16(pAd, 0x3a, value);
        pAd->LedCntl.word = (value >> 8);
        RT28xx_EEPROM_READ16(pAd, EEPROM_LED1_OFFSET, value);
@@ -1109,8 +1109,8 @@ VOID NICReadEEPROMParameters(IN PRTMP_ADAPTER pAd, IN PUCHAR mac_addr)
 #ifdef RT30xx
 #ifdef RTMP_EFUSE_SUPPORT
        RtmpEfuseSupportCheck(pAd);
-#endif // RTMP_EFUSE_SUPPORT //
-#endif // RT30xx //
+#endif /* RTMP_EFUSE_SUPPORT // */
+#endif /* RT30xx // */
 
        DBGPRINT(RT_DEBUG_TRACE, ("<-- NICReadEEPROMParameters\n"));
 }
@@ -1138,7 +1138,7 @@ VOID NICInitAsicFromEEPROM(IN PRTMP_ADAPTER pAd)
        UINT32 data = 0;
        UCHAR BBPR1 = 0;
        USHORT i;
-//      EEPROM_ANTENNA_STRUC    Antenna;
+/*      EEPROM_ANTENNA_STRUC    Antenna; */
        EEPROM_NIC_CONFIG2_STRUC NicConfig2;
        UCHAR BBPR3 = 0;
 
@@ -1166,18 +1166,18 @@ VOID NICInitAsicFromEEPROM(IN PRTMP_ADAPTER pAd)
                }
        }
 
-       // Save the antenna for future use
+       /* Save the antenna for future use */
        pAd->NicConfig2.word = NicConfig2.word;
 
 #ifdef RT30xx
-       // set default antenna as main
+       /* set default antenna as main */
        if (pAd->RfIcType == RFIC_3020)
                AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt);
-#endif // RT30xx //
+#endif /* RT30xx // */
 
-       //
-       // Send LED Setting to MCU.
-       //
+       /* */
+       /* Send LED Setting to MCU. */
+       /* */
        if (pAd->LedCntl.word == 0xFF) {
                pAd->LedCntl.word = 0x01;
                pAd->Led1 = 0x5555;
@@ -1185,10 +1185,10 @@ VOID NICInitAsicFromEEPROM(IN PRTMP_ADAPTER pAd)
 
 #ifdef RTMP_MAC_PCI
                pAd->Led3 = 0xA9F8;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 #ifdef RTMP_MAC_USB
                pAd->Led3 = 0x5627;
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
        }
 
        AsicSendCommandToMcu(pAd, 0x52, 0xff, (UCHAR) pAd->Led1,
@@ -1200,19 +1200,19 @@ VOID NICInitAsicFromEEPROM(IN PRTMP_ADAPTER pAd)
        AsicSendCommandToMcu(pAd, 0x51, 0xff, 0, pAd->LedCntl.field.Polarity);
 
        pAd->LedIndicatorStrength = 0xFF;
-       RTMPSetSignalLED(pAd, -100);    // Force signal strength Led to be turned off, before link up
+       RTMPSetSignalLED(pAd, -100);    /* Force signal strength Led to be turned off, before link up */
 
        {
-               // Read Hardware controlled Radio state enable bit
+               /* Read Hardware controlled Radio state enable bit */
                if (NicConfig2.field.HardwareRadioControl == 1) {
                        pAd->StaCfg.bHardwareRadio = TRUE;
 
-                       // Read GPIO pin2 as Hardware controlled radio state
+                       /* Read GPIO pin2 as Hardware controlled radio state */
                        RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &data);
                        if ((data & 0x04) == 0) {
                                pAd->StaCfg.bHwRadio = FALSE;
                                pAd->StaCfg.bRadio = FALSE;
-//                              RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0x00001818);
+/*                              RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0x00001818); */
                                RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
                        }
                } else
@@ -1227,15 +1227,15 @@ VOID NICInitAsicFromEEPROM(IN PRTMP_ADAPTER pAd)
                        AsicSendCommandToMcu(pAd, 0x30, PowerRadioOffCID, 0xff,
                                             0x02);
                        AsicCheckCommanOk(pAd, PowerRadioOffCID);
-#endif // RT3090 //
+#endif /* RT3090 // */
 #ifndef RT3090
                        AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x02);
-#endif // RT3090 //
+#endif /* RT3090 // */
                        AsicSendCommandToMcu(pAd, 0x31, PowerWakeCID, 0x00,
                                             0x00);
-                       // 2-1. wait command ok.
+                       /* 2-1. wait command ok. */
                        AsicCheckCommanOk(pAd, PowerWakeCID);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
                }
        }
 
@@ -1246,8 +1246,8 @@ VOID NICInitAsicFromEEPROM(IN PRTMP_ADAPTER pAd)
                if (pChipOps->AsicReverseRfFromSleepMode)
                        pChipOps->AsicReverseRfFromSleepMode(pAd);
        }
-       // 3090 MCU Wakeup command needs more time to be stable.
-       // Before stable, don't issue other MCU command to prevent from firmware error.
+       /* 3090 MCU Wakeup command needs more time to be stable. */
+       /* Before stable, don't issue other MCU command to prevent from firmware error. */
 
        if ((IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd))
            && IS_VERSION_AFTER_F(pAd)
@@ -1258,22 +1258,22 @@ VOID NICInitAsicFromEEPROM(IN PRTMP_ADAPTER pAd)
                pAd->brt30xxBanMcuCmd = FALSE;
                RTMP_SEM_UNLOCK(&pAd->McuCmdLock);
        }
-#endif // RT30xx //
-#endif // RTMP_MAC_PCI //
+#endif /* RT30xx // */
+#endif /* RTMP_MAC_PCI // */
 
-       // Turn off patching for cardbus controller
+       /* Turn off patching for cardbus controller */
        if (NicConfig2.field.CardbusAcceleration == 1) {
-//              pAd->bTest1 = TRUE;
+/*              pAd->bTest1 = TRUE; */
        }
 
        if (NicConfig2.field.DynamicTxAgcControl == 1)
                pAd->bAutoTxAgcA = pAd->bAutoTxAgcG = TRUE;
        else
                pAd->bAutoTxAgcA = pAd->bAutoTxAgcG = FALSE;
-       //
-       // Since BBP has been progamed, to make sure BBP setting will be
-       // upate inside of AsicAntennaSelect, so reset to UNKNOWN_BAND!!
-       //
+       /* */
+       /* Since BBP has been progamed, to make sure BBP setting will be */
+       /* upate inside of AsicAntennaSelect, so reset to UNKNOWN_BAND!! */
+       /* */
        pAd->CommonCfg.BandState = UNKNOWN_BAND;
 
        RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPR3);
@@ -1288,7 +1288,7 @@ VOID NICInitAsicFromEEPROM(IN PRTMP_ADAPTER pAd)
        RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
 
        {
-               // Handle the difference when 1T
+               /* Handle the difference when 1T */
                RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BBPR1);
                if (pAd->Antenna.field.TxPath == 1) {
                        BBPR1 &= (~0x18);
@@ -1303,13 +1303,13 @@ VOID NICInitAsicFromEEPROM(IN PRTMP_ADAPTER pAd)
 
 #ifdef RTMP_MAC_USB
 #ifdef RT30xx
-       // update registers from EEPROM for RT3071 or later(3572/3592).
+       /* update registers from EEPROM for RT3071 or later(3572/3592). */
 
        if (IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd)) {
                UCHAR RegIdx, RegValue;
                USHORT value;
 
-               // after RT3071, write BBP from EEPROM 0xF0 to 0x102
+               /* after RT3071, write BBP from EEPROM 0xF0 to 0x102 */
                for (i = 0xF0; i <= 0x102; i = i + 2) {
                        value = 0xFFFF;
                        RT28xx_EEPROM_READ16(pAd, i, value);
@@ -1324,7 +1324,7 @@ VOID NICInitAsicFromEEPROM(IN PRTMP_ADAPTER pAd)
                        }
                }
 
-               // after RT3071, write RF from EEPROM 0x104 to 0x116
+               /* after RT3071, write RF from EEPROM 0x104 to 0x116 */
                for (i = 0x104; i <= 0x116; i = i + 2) {
                        value = 0xFFFF;
                        RT28xx_EEPROM_READ16(pAd, i, value);
@@ -1338,8 +1338,8 @@ VOID NICInitAsicFromEEPROM(IN PRTMP_ADAPTER pAd)
                        }
                }
        }
-#endif // RT30xx //
-#endif // RTMP_MAC_USB //
+#endif /* RT30xx // */
+#endif /* RTMP_MAC_USB // */
 
        DBGPRINT(RT_DEBUG_TRACE,
                 ("TxPath = %d, RxPath = %d, RFIC=%d, Polar+LED mode=%x\n",
@@ -1373,14 +1373,14 @@ NDIS_STATUS NICInitializeAdapter(IN PRTMP_ADAPTER pAd, IN BOOLEAN bHardReset)
 #ifdef RTMP_MAC_PCI
        UINT32 Value;
        DELAY_INT_CFG_STRUC IntCfg;
-#endif // RTMP_MAC_PCI //
-//      INT_MASK_CSR_STRUC              IntMask;
+#endif /* RTMP_MAC_PCI // */
+/*      INT_MASK_CSR_STRUC              IntMask; */
        ULONG i = 0, j = 0;
        AC_TXOP_CSR0_STRUC csr0;
 
        DBGPRINT(RT_DEBUG_TRACE, ("--> NICInitializeAdapter\n"));
 
-       // 3. Set DMA global configuration except TX_DMA_EN and RX_DMA_EN bits:
+       /* 3. Set DMA global configuration except TX_DMA_EN and RX_DMA_EN bits: */
 retry:
        i = 0;
        do {
@@ -1398,7 +1398,7 @@ retry:
        GloCfg.field.EnTXWriteBackDDONE = 1;
        RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, GloCfg.word);
 
-       // Record HW Beacon offset
+       /* Record HW Beacon offset */
        pAd->BeaconOffset[0] = HW_BEACON_BASE0;
        pAd->BeaconOffset[1] = HW_BEACON_BASE1;
        pAd->BeaconOffset[2] = HW_BEACON_BASE2;
@@ -1408,19 +1408,19 @@ retry:
        pAd->BeaconOffset[6] = HW_BEACON_BASE6;
        pAd->BeaconOffset[7] = HW_BEACON_BASE7;
 
-       //
-       // write all shared Ring's base address into ASIC
-       //
+       /* */
+       /* write all shared Ring's base address into ASIC */
+       /* */
 
-       // asic simulation sequence put this ahead before loading firmware.
-       // pbf hardware reset
+       /* asic simulation sequence put this ahead before loading firmware. */
+       /* pbf hardware reset */
 #ifdef RTMP_MAC_PCI
-       RTMP_IO_WRITE32(pAd, WPDMA_RST_IDX, 0x1003f);   // 0x10000 for reset rx, 0x3f resets all 6 tx rings.
+       RTMP_IO_WRITE32(pAd, WPDMA_RST_IDX, 0x1003f);   /* 0x10000 for reset rx, 0x3f resets all 6 tx rings. */
        RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0xe1f);
        RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0xe00);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
-       // Initialze ASIC for TX & Rx operation
+       /* Initialze ASIC for TX & Rx operation */
        if (NICInitializeAsic(pAd, bHardReset) != NDIS_STATUS_SUCCESS) {
                if (j++ == 0) {
                        NICLoadFirmware(pAd);
@@ -1430,46 +1430,46 @@ retry:
        }
 
 #ifdef RTMP_MAC_PCI
-       // Write AC_BK base address register
+       /* Write AC_BK base address register */
        Value =
            RTMP_GetPhysicalAddressLow(pAd->TxRing[QID_AC_BK].Cell[0].AllocPa);
        RTMP_IO_WRITE32(pAd, TX_BASE_PTR1, Value);
        DBGPRINT(RT_DEBUG_TRACE, ("--> TX_BASE_PTR1 : 0x%x\n", Value));
 
-       // Write AC_BE base address register
+       /* Write AC_BE base address register */
        Value =
            RTMP_GetPhysicalAddressLow(pAd->TxRing[QID_AC_BE].Cell[0].AllocPa);
        RTMP_IO_WRITE32(pAd, TX_BASE_PTR0, Value);
        DBGPRINT(RT_DEBUG_TRACE, ("--> TX_BASE_PTR0 : 0x%x\n", Value));
 
-       // Write AC_VI base address register
+       /* Write AC_VI base address register */
        Value =
            RTMP_GetPhysicalAddressLow(pAd->TxRing[QID_AC_VI].Cell[0].AllocPa);
        RTMP_IO_WRITE32(pAd, TX_BASE_PTR2, Value);
        DBGPRINT(RT_DEBUG_TRACE, ("--> TX_BASE_PTR2 : 0x%x\n", Value));
 
-       // Write AC_VO base address register
+       /* Write AC_VO base address register */
        Value =
            RTMP_GetPhysicalAddressLow(pAd->TxRing[QID_AC_VO].Cell[0].AllocPa);
        RTMP_IO_WRITE32(pAd, TX_BASE_PTR3, Value);
        DBGPRINT(RT_DEBUG_TRACE, ("--> TX_BASE_PTR3 : 0x%x\n", Value));
 
-       // Write MGMT_BASE_CSR register
+       /* Write MGMT_BASE_CSR register */
        Value = RTMP_GetPhysicalAddressLow(pAd->MgmtRing.Cell[0].AllocPa);
        RTMP_IO_WRITE32(pAd, TX_BASE_PTR5, Value);
        DBGPRINT(RT_DEBUG_TRACE, ("--> TX_BASE_PTR5 : 0x%x\n", Value));
 
-       // Write RX_BASE_CSR register
+       /* Write RX_BASE_CSR register */
        Value = RTMP_GetPhysicalAddressLow(pAd->RxRing.Cell[0].AllocPa);
        RTMP_IO_WRITE32(pAd, RX_BASE_PTR, Value);
        DBGPRINT(RT_DEBUG_TRACE, ("--> RX_BASE_PTR : 0x%x\n", Value));
 
-       // Init RX Ring index pointer
+       /* Init RX Ring index pointer */
        pAd->RxRing.RxSwReadIdx = 0;
        pAd->RxRing.RxCpuIdx = RX_RING_SIZE - 1;
        RTMP_IO_WRITE32(pAd, RX_CRX_IDX, pAd->RxRing.RxCpuIdx);
 
-       // Init TX rings index pointer
+       /* Init TX rings index pointer */
        {
                for (i = 0; i < NUM_OF_TX_RING; i++) {
                        pAd->TxRing[i].TxSwFreeIdx = 0;
@@ -1479,16 +1479,16 @@ retry:
                }
        }
 
-       // init MGMT ring index pointer
+       /* init MGMT ring index pointer */
        pAd->MgmtRing.TxSwFreeIdx = 0;
        pAd->MgmtRing.TxCpuIdx = 0;
        RTMP_IO_WRITE32(pAd, TX_MGMTCTX_IDX, pAd->MgmtRing.TxCpuIdx);
 
-       //
-       // set each Ring's SIZE  into ASIC. Descriptor Size is fixed by design.
-       //
+       /* */
+       /* set each Ring's SIZE  into ASIC. Descriptor Size is fixed by design. */
+       /* */
 
-       // Write TX_RING_CSR0 register
+       /* Write TX_RING_CSR0 register */
        Value = TX_RING_SIZE;
        RTMP_IO_WRITE32(pAd, TX_MAX_CNT0, Value);
        RTMP_IO_WRITE32(pAd, TX_MAX_CNT1, Value);
@@ -1498,25 +1498,25 @@ retry:
        Value = MGMT_RING_SIZE;
        RTMP_IO_WRITE32(pAd, TX_MGMTMAX_CNT, Value);
 
-       // Write RX_RING_CSR register
+       /* Write RX_RING_CSR register */
        Value = RX_RING_SIZE;
        RTMP_IO_WRITE32(pAd, RX_MAX_CNT, Value);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
-       // WMM parameter
+       /* WMM parameter */
        csr0.word = 0;
        RTMP_IO_WRITE32(pAd, WMM_TXOP0_CFG, csr0.word);
        if (pAd->CommonCfg.PhyMode == PHY_11B) {
-               csr0.field.Ac0Txop = 192;       // AC_VI: 192*32us ~= 6ms
-               csr0.field.Ac1Txop = 96;        // AC_VO: 96*32us  ~= 3ms
+               csr0.field.Ac0Txop = 192;       /* AC_VI: 192*32us ~= 6ms */
+               csr0.field.Ac1Txop = 96;        /* AC_VO: 96*32us  ~= 3ms */
        } else {
-               csr0.field.Ac0Txop = 96;        // AC_VI: 96*32us ~= 3ms
-               csr0.field.Ac1Txop = 48;        // AC_VO: 48*32us ~= 1.5ms
+               csr0.field.Ac0Txop = 96;        /* AC_VI: 96*32us ~= 3ms */
+               csr0.field.Ac1Txop = 48;        /* AC_VO: 48*32us ~= 1.5ms */
        }
        RTMP_IO_WRITE32(pAd, WMM_TXOP1_CFG, csr0.word);
 
 #ifdef RTMP_MAC_PCI
-       // 3. Set DMA global configuration except TX_DMA_EN and RX_DMA_EN bits:
+       /* 3. Set DMA global configuration except TX_DMA_EN and RX_DMA_EN bits: */
        i = 0;
        do {
                RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &GloCfg.word);
@@ -1534,11 +1534,11 @@ retry:
 
        IntCfg.word = 0;
        RTMP_IO_WRITE32(pAd, DELAY_INT_CFG, IntCfg.word);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
-       // reset action
-       // Load firmware
-       //  Status = NICLoadFirmware(pAd);
+       /* reset action */
+       /* Load firmware */
+       /*  Status = NICLoadFirmware(pAd); */
 
        DBGPRINT(RT_DEBUG_TRACE, ("<-- NICInitializeAdapter\n"));
        return Status;
@@ -1571,25 +1571,25 @@ NDIS_STATUS NICInitializeAsic(IN PRTMP_ADAPTER pAd, IN BOOLEAN bHardReset)
        UINT32 MacCsr0 = 0;
        NTSTATUS Status;
        UCHAR Value = 0xff;
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 #ifdef RT30xx
        UCHAR bbpreg = 0;
        UCHAR RFValue = 0;
-#endif // RT30xx //
+#endif /* RT30xx // */
        USHORT KeyIdx;
        INT i, apidx;
 
        DBGPRINT(RT_DEBUG_TRACE, ("--> NICInitializeAsic\n"));
 
 #ifdef RTMP_MAC_PCI
-       RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0x3); // To fix driver disable/enable hang issue when radio off
+       RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0x3); /* To fix driver disable/enable hang issue when radio off */
        if (bHardReset == TRUE) {
                RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x3);
        } else
                RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x1);
 
        RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x0);
-       // Initialize MAC register to default value
+       /* Initialize MAC register to default value */
        for (Index = 0; Index < NUM_MAC_REG_PARMS; Index++) {
                RTMP_IO_WRITE32(pAd, MACRegTable[Index].Register,
                                MACRegTable[Index].Value);
@@ -1601,15 +1601,15 @@ NDIS_STATUS NICInitializeAsic(IN PRTMP_ADAPTER pAd, IN BOOLEAN bHardReset)
                                        STAMACRegTable[Index].Value);
                }
        }
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 #ifdef RTMP_MAC_USB
-       //
-       // Make sure MAC gets ready after NICLoadFirmware().
-       //
+       /* */
+       /* Make sure MAC gets ready after NICLoadFirmware(). */
+       /* */
        Index = 0;
 
-       //To avoid hang-on issue when interface up in kernel 2.4,
-       //we use a local variable "MacCsr0" instead of using "pAd->MACVersion" directly.
+       /*To avoid hang-on issue when interface up in kernel 2.4, */
+       /*we use a local variable "MacCsr0" instead of using "pAd->MACVersion" directly. */
        do {
                RTMP_IO_READ32(pAd, MAC_CSR0, &MacCsr0);
 
@@ -1622,7 +1622,7 @@ NDIS_STATUS NICInitializeAsic(IN PRTMP_ADAPTER pAd, IN BOOLEAN bHardReset)
        pAd->MACVersion = MacCsr0;
        DBGPRINT(RT_DEBUG_TRACE,
                 ("MAC_CSR0  [ Ver:Rev=0x%08x]\n", pAd->MACVersion));
-       // turn on bit13 (set to zero) after rt2860D. This is to solve high-current issue.
+       /* turn on bit13 (set to zero) after rt2860D. This is to solve high-current issue. */
        RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &MacCsr12);
        MacCsr12 &= (~0x2000);
        RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, MacCsr12);
@@ -1633,7 +1633,7 @@ NDIS_STATUS NICInitializeAsic(IN PRTMP_ADAPTER pAd, IN BOOLEAN bHardReset)
 
        RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x0);
 
-       // Initialize MAC register to default value
+       /* Initialize MAC register to default value */
        for (Index = 0; Index < NUM_MAC_REG_PARMS; Index++) {
 #ifdef RT30xx
                if ((MACRegTable[Index].Register == TX_SW_CFG0)
@@ -1641,7 +1641,7 @@ NDIS_STATUS NICInitializeAsic(IN PRTMP_ADAPTER pAd, IN BOOLEAN bHardReset)
                        || IS_RT3090(pAd) || IS_RT3390(pAd))) {
                        MACRegTable[Index].Value = 0x00000400;
                }
-#endif // RT30xx //
+#endif /* RT30xx // */
                RTMP_IO_WRITE32(pAd, (USHORT) MACRegTable[Index].Register,
                                MACRegTable[Index].Value);
        }
@@ -1653,19 +1653,19 @@ NDIS_STATUS NICInitializeAsic(IN PRTMP_ADAPTER pAd, IN BOOLEAN bHardReset)
                                        STAMACRegTable[Index].Value);
                }
        }
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
 #ifdef RT30xx
-       // Initialize RT3070 serial MAC registers which is different from RT2870 serial
+       /* Initialize RT3070 serial MAC registers which is different from RT2870 serial */
        if (IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd)) {
                RTMP_IO_WRITE32(pAd, TX_SW_CFG1, 0);
 
-               // RT3071 version E has fixed this issue
+               /* RT3071 version E has fixed this issue */
                if ((pAd->MACVersion & 0xffff) < 0x0211) {
                        if (pAd->NicConfig2.field.DACTestBit == 1) {
-                               RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x2C); // To fix throughput drop drastically
+                               RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x2C); /* To fix throughput drop drastically */
                        } else {
-                               RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x0F); // To fix throughput drop drastically
+                               RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x0F); /* To fix throughput drop drastically */
                        }
                } else {
                        RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x0);
@@ -1673,21 +1673,21 @@ NDIS_STATUS NICInitializeAsic(IN PRTMP_ADAPTER pAd, IN BOOLEAN bHardReset)
        } else if (IS_RT3070(pAd)) {
                if (((pAd->MACVersion & 0xffff) < 0x0201)) {
                        RTMP_IO_WRITE32(pAd, TX_SW_CFG1, 0);
-                       RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x2C); // To fix throughput drop drastically
+                       RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x2C); /* To fix throughput drop drastically */
                } else {
                        RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0);
                }
        }
-#endif // RT30xx //
+#endif /* RT30xx // */
 
-       //
-       // Before program BBP, we need to wait BBP/RF get wake up.
-       //
+       /* */
+       /* Before program BBP, we need to wait BBP/RF get wake up. */
+       /* */
        Index = 0;
        do {
                RTMP_IO_READ32(pAd, MAC_STATUS_CFG, &MacCsr12);
 
-               if ((MacCsr12 & 0x03) == 0)     // if BB.RF is stable
+               if ((MacCsr12 & 0x03) == 0)     /* if BB.RF is stable */
                        break;
 
                DBGPRINT(RT_DEBUG_TRACE,
@@ -1695,87 +1695,87 @@ NDIS_STATUS NICInitializeAsic(IN PRTMP_ADAPTER pAd, IN BOOLEAN bHardReset)
                RTMPusecDelay(1000);
        } while (Index++ < 100);
 
-       // The commands to firmware should be after these commands, these commands will init firmware
-       // PCI and USB are not the same because PCI driver needs to wait for PCI bus ready
-       RTMP_IO_WRITE32(pAd, H2M_BBP_AGENT, 0); // initialize BBP R/W access agent
+       /* The commands to firmware should be after these commands, these commands will init firmware */
+       /* PCI and USB are not the same because PCI driver needs to wait for PCI bus ready */
+       RTMP_IO_WRITE32(pAd, H2M_BBP_AGENT, 0); /* initialize BBP R/W access agent */
        RTMP_IO_WRITE32(pAd, H2M_MAILBOX_CSR, 0);
 #ifdef RT3090
-       //2008/11/28:KH add to fix the dead rf frequency offset bug<--
+       /*2008/11/28:KH add to fix the dead rf frequency offset bug<-- */
        AsicSendCommandToMcu(pAd, 0x72, 0, 0, 0);
-       //2008/11/28:KH add to fix the dead rf frequency offset bug-->
-#endif // RT3090 //
+       /*2008/11/28:KH add to fix the dead rf frequency offset bug--> */
+#endif /* RT3090 // */
        RTMPusecDelay(1000);
 
-       // Read BBP register, make sure BBP is up and running before write new data
+       /* Read BBP register, make sure BBP is up and running before write new data */
        Index = 0;
        do {
                RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R0, &R0);
                DBGPRINT(RT_DEBUG_TRACE, ("BBP version = %x\n", R0));
        } while ((++Index < 20) && ((R0 == 0xff) || (R0 == 0x00)));
-       //ASSERT(Index < 20); //this will cause BSOD on Check-build driver
+       /*ASSERT(Index < 20); //this will cause BSOD on Check-build driver */
 
        if ((R0 == 0xff) || (R0 == 0x00))
                return NDIS_STATUS_FAILURE;
 
-       // Initialize BBP register to default value
+       /* Initialize BBP register to default value */
        for (Index = 0; Index < NUM_BBP_REG_PARMS; Index++) {
                RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBPRegTable[Index].Register,
                                             BBPRegTable[Index].Value);
        }
 
 #ifdef RTMP_MAC_PCI
-       // TODO: shiang, check MACVersion, currently, rbus-based chip use this.
+       /* TODO: shiang, check MACVersion, currently, rbus-based chip use this. */
        if (pAd->MACVersion == 0x28720200) {
-               //UCHAR value;
+               /*UCHAR value; */
                ULONG value2;
 
-               //disable MLD by Bruce 20080704
-               //BBP_IO_READ8_BY_REG_ID(pAd, BBP_R105, &value);
-               //BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R105, value | 4);
+               /*disable MLD by Bruce 20080704 */
+               /*BBP_IO_READ8_BY_REG_ID(pAd, BBP_R105, &value); */
+               /*BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R105, value | 4); */
 
-               //Maximum PSDU length from 16K to 32K bytes
+               /*Maximum PSDU length from 16K to 32K bytes */
                RTMP_IO_READ32(pAd, MAX_LEN_CFG, &value2);
                value2 &= ~(0x3 << 12);
                value2 |= (0x2 << 12);
                RTMP_IO_WRITE32(pAd, MAX_LEN_CFG, value2);
        }
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
-       // for rt2860E and after, init BBP_R84 with 0x19. This is for extension channel overlapping IOT.
-       // RT3090 should not program BBP R84 to 0x19, otherwise TX will block.
-       //3070/71/72,3090,3090A( are included in RT30xx),3572,3390
+       /* for rt2860E and after, init BBP_R84 with 0x19. This is for extension channel overlapping IOT. */
+       /* RT3090 should not program BBP R84 to 0x19, otherwise TX will block. */
+       /*3070/71/72,3090,3090A( are included in RT30xx),3572,3390 */
        if (((pAd->MACVersion & 0xffff) != 0x0101)
            && !(IS_RT30xx(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd)))
                RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R84, 0x19);
 
 #ifdef RT30xx
-// add by johnli, RF power sequence setup
-       if (IS_RT30xx(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd)) {       //update for RT3070/71/72/90/91/92,3572,3390.
+/* add by johnli, RF power sequence setup */
+       if (IS_RT30xx(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd)) {       /*update for RT3070/71/72/90/91/92,3572,3390. */
                RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R79, 0x13);
                RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R80, 0x05);
                RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R81, 0x33);
        }
 
-       if (IS_RT3090(pAd) || IS_RT3390(pAd))   // RT309x, RT3071/72
+       if (IS_RT3090(pAd) || IS_RT3390(pAd))   /* RT309x, RT3071/72 */
        {
-               // enable DC filter
+               /* enable DC filter */
                if ((pAd->MACVersion & 0xffff) >= 0x0211) {
                        RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R103, 0xc0);
                }
-               // improve power consumption
+               /* improve power consumption */
                RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R138, &bbpreg);
                if (pAd->Antenna.field.TxPath == 1) {
-                       // turn off tx DAC_1
+                       /* turn off tx DAC_1 */
                        bbpreg = (bbpreg | 0x20);
                }
 
                if (pAd->Antenna.field.RxPath == 1) {
-                       // turn off tx ADC_1
+                       /* turn off tx ADC_1 */
                        bbpreg &= (~0x2);
                }
                RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R138, bbpreg);
 
-               // improve power consumption in RT3071 Ver.E
+               /* improve power consumption in RT3071 Ver.E */
                if ((pAd->MACVersion & 0xffff) >= 0x0211) {
                        RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R31, &bbpreg);
                        bbpreg &= (~0x3);
@@ -1783,39 +1783,39 @@ NDIS_STATUS NICInitializeAsic(IN PRTMP_ADAPTER pAd, IN BOOLEAN bHardReset)
                }
        } else if (IS_RT3070(pAd)) {
                if ((pAd->MACVersion & 0xffff) >= 0x0201) {
-                       // enable DC filter
+                       /* enable DC filter */
                        RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R103, 0xc0);
 
-                       // improve power consumption in RT3070 Ver.F
+                       /* improve power consumption in RT3070 Ver.F */
                        RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R31, &bbpreg);
                        bbpreg &= (~0x3);
                        RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R31, bbpreg);
                }
-               // TX_LO1_en, RF R17 register Bit 3 to 0
+               /* TX_LO1_en, RF R17 register Bit 3 to 0 */
                RT30xxReadRFRegister(pAd, RF_R17, &RFValue);
                RFValue &= (~0x08);
-               // to fix rx long range issue
+               /* to fix rx long range issue */
                if (pAd->NicConfig2.field.ExternalLNAForG == 0) {
                        RFValue |= 0x20;
                }
-               // set RF_R17_bit[2:0] equal to EEPROM setting at 0x48h
+               /* set RF_R17_bit[2:0] equal to EEPROM setting at 0x48h */
                if (pAd->TxMixerGain24G >= 1) {
-                       RFValue &= (~0x7);      // clean bit [2:0]
+                       RFValue &= (~0x7);      /* clean bit [2:0] */
                        RFValue |= pAd->TxMixerGain24G;
                }
                RT30xxWriteRFRegister(pAd, RF_R17, RFValue);
        }
-// end johnli
-#endif // RT30xx //
+/* end johnli */
+#endif /* RT30xx // */
 
        if (pAd->MACVersion == 0x28600100) {
                RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x16);
                RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x12);
        }
 
-       if (pAd->MACVersion >= RALINK_2880E_VERSION && pAd->MACVersion < RALINK_3070_VERSION)   // 3*3
+       if (pAd->MACVersion >= RALINK_2880E_VERSION && pAd->MACVersion < RALINK_3070_VERSION)   /* 3*3 */
        {
-               // enlarge MAX_LEN_CFG
+               /* enlarge MAX_LEN_CFG */
                UINT32 csr;
                RTMP_IO_READ32(pAd, MAX_LEN_CFG, &csr);
                csr &= 0xFFF;
@@ -1827,7 +1827,7 @@ NDIS_STATUS NICInitializeAsic(IN PRTMP_ADAPTER pAd, IN BOOLEAN bHardReset)
                UCHAR MAC_Value[] =
                    { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0, 0 };
 
-               //Initialize WCID table
+               /*Initialize WCID table */
                Value = 0xff;
                for (Index = 0; Index < 254; Index++) {
                        RTUSBMultiWrite(pAd,
@@ -1835,18 +1835,18 @@ NDIS_STATUS NICInitializeAsic(IN PRTMP_ADAPTER pAd, IN BOOLEAN bHardReset)
                                        MAC_Value, 8);
                }
        }
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
-       // Add radio off control
+       /* Add radio off control */
        {
                if (pAd->StaCfg.bRadio == FALSE) {
-//                      RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0x00001818);
+/*                      RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0x00001818); */
                        RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
                        DBGPRINT(RT_DEBUG_TRACE, ("Set Radio Off\n"));
                }
        }
 
-       // Clear raw counters
+       /* Clear raw counters */
        RTMP_IO_READ32(pAd, RX_STA_CNT0, &Counter);
        RTMP_IO_READ32(pAd, RX_STA_CNT1, &Counter);
        RTMP_IO_READ32(pAd, RX_STA_CNT2, &Counter);
@@ -1854,29 +1854,29 @@ NDIS_STATUS NICInitializeAsic(IN PRTMP_ADAPTER pAd, IN BOOLEAN bHardReset)
        RTMP_IO_READ32(pAd, TX_STA_CNT1, &Counter);
        RTMP_IO_READ32(pAd, TX_STA_CNT2, &Counter);
 
-       // ASIC will keep garbage value after boot
-       // Clear all shared key table when initial
-       // This routine can be ignored in radio-ON/OFF operation.
+       /* ASIC will keep garbage value after boot */
+       /* Clear all shared key table when initial */
+       /* This routine can be ignored in radio-ON/OFF operation. */
        if (bHardReset) {
                for (KeyIdx = 0; KeyIdx < 4; KeyIdx++) {
                        RTMP_IO_WRITE32(pAd, SHARED_KEY_MODE_BASE + 4 * KeyIdx,
                                        0);
                }
 
-               // Clear all pairwise key table when initial
+               /* Clear all pairwise key table when initial */
                for (KeyIdx = 0; KeyIdx < 256; KeyIdx++) {
                        RTMP_IO_WRITE32(pAd,
                                        MAC_WCID_ATTRIBUTE_BASE +
                                        (KeyIdx * HW_WCID_ATTRI_SIZE), 1);
                }
        }
-       // assert HOST ready bit
-//  RTMP_IO_WRITE32(pAd, MAC_CSR1, 0x0); // 2004-09-14 asked by Mark
-//  RTMP_IO_WRITE32(pAd, MAC_CSR1, 0x4);
+       /* assert HOST ready bit */
+/*  RTMP_IO_WRITE32(pAd, MAC_CSR1, 0x0); // 2004-09-14 asked by Mark */
+/*  RTMP_IO_WRITE32(pAd, MAC_CSR1, 0x4); */
 
-       // It isn't necessary to clear this space when not hard reset.
+       /* It isn't necessary to clear this space when not hard reset. */
        if (bHardReset == TRUE) {
-               // clear all on-chip BEACON frame space
+               /* clear all on-chip BEACON frame space */
                for (apidx = 0; apidx < HW_BEACON_MAX_COUNT; apidx++) {
                        for (i = 0; i < HW_BEACON_OFFSET >> 2; i += 4)
                                RTMP_IO_WRITE32(pAd,
@@ -1886,22 +1886,22 @@ NDIS_STATUS NICInitializeAsic(IN PRTMP_ADAPTER pAd, IN BOOLEAN bHardReset)
        }
 #ifdef RTMP_MAC_USB
        AsicDisableSync(pAd);
-       // Clear raw counters
+       /* Clear raw counters */
        RTMP_IO_READ32(pAd, RX_STA_CNT0, &Counter);
        RTMP_IO_READ32(pAd, RX_STA_CNT1, &Counter);
        RTMP_IO_READ32(pAd, RX_STA_CNT2, &Counter);
        RTMP_IO_READ32(pAd, TX_STA_CNT0, &Counter);
        RTMP_IO_READ32(pAd, TX_STA_CNT1, &Counter);
        RTMP_IO_READ32(pAd, TX_STA_CNT2, &Counter);
-       // Default PCI clock cycle per ms is different as default setting, which is based on PCI.
+       /* Default PCI clock cycle per ms is different as default setting, which is based on PCI. */
        RTMP_IO_READ32(pAd, USB_CYC_CFG, &Counter);
        Counter &= 0xffffff00;
        Counter |= 0x000001e;
        RTMP_IO_WRITE32(pAd, USB_CYC_CFG, Counter);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
        {
-               // for rt2860E and after, init TXOP_CTRL_CFG with 0x583f. This is for extension channel overlapping IOT.
+               /* for rt2860E and after, init TXOP_CTRL_CFG with 0x583f. This is for extension channel overlapping IOT. */
                if ((pAd->MACVersion & 0xffff) != 0x0101)
                        RTMP_IO_WRITE32(pAd, TXOP_CTRL_CFG, 0x583f);
        }
@@ -1934,16 +1934,16 @@ VOID NICIssueReset(IN PRTMP_ADAPTER pAd)
        UINT32 Value = 0;
        DBGPRINT(RT_DEBUG_TRACE, ("--> NICIssueReset\n"));
 
-       // Abort Tx, prevent ASIC from writing to Host memory
-       //RTMP_IO_WRITE32(pAd, TX_CNTL_CSR, 0x001f0000);
+       /* Abort Tx, prevent ASIC from writing to Host memory */
+       /*RTMP_IO_WRITE32(pAd, TX_CNTL_CSR, 0x001f0000); */
 
-       // Disable Rx, register value supposed will remain after reset
+       /* Disable Rx, register value supposed will remain after reset */
        RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
        Value &= (0xfffffff3);
        RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
 
-       // Issue reset and clear from reset state
-       RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x03);       // 2004-09-17 change from 0x01
+       /* Issue reset and clear from reset state */
+       RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x03);       /* 2004-09-17 change from 0x01 */
        RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x00);
 
        DBGPRINT(RT_DEBUG_TRACE, ("<-- NICIssueReset\n"));
@@ -2001,7 +2001,7 @@ VOID NICUpdateFifoStaCounters(IN PRTMP_ADAPTER pAd)
 
                pEntry->DebugFIFOCount++;
 
-               if (StaFifo.field.TxBF) // 3*3
+               if (StaFifo.field.TxBF) /* 3*3 */
                        pEntry->TxBFCount++;
 
                if (!StaFifo.field.TxSuccess) {
@@ -2022,17 +2022,17 @@ VOID NICUpdateFifoStaCounters(IN PRTMP_ADAPTER pAd)
                                                                     FALSE);
                                        }
 
-                                       // Update the continuous transmission counter except PS mode
+                                       /* Update the continuous transmission counter except PS mode */
                                        pEntry->ContinueTxFailCnt++;
                                } else {
-                                       // Clear the FIFOCount when sta in Power Save mode. Basically we assume
-                                       //     this tx error happened due to sta just go to sleep.
+                                       /* Clear the FIFOCount when sta in Power Save mode. Basically we assume */
+                                       /*     this tx error happened due to sta just go to sleep. */
                                        pEntry->FIFOCount = 0;
                                        pEntry->ContinueTxFailCnt = 0;
                                }
-                               //pEntry->FIFOCount = 0;
+                               /*pEntry->FIFOCount = 0; */
                        }
-                       //pEntry->bSendBAR = TRUE;
+                       /*pEntry->bSendBAR = TRUE; */
                } else {
                        if ((pEntry->PsMode != PWR_SAVE)
                            && (pEntry->NoBADataCountDown > 0)) {
@@ -2044,7 +2044,7 @@ VOID NICUpdateFifoStaCounters(IN PRTMP_ADAPTER pAd)
 
                        pEntry->FIFOCount = 0;
                        pEntry->OneSecTxNoRetryOkCount++;
-                       // update NoDataIdleCount when sucessful send packet to STA.
+                       /* update NoDataIdleCount when sucessful send packet to STA. */
                        pEntry->NoDataIdleCount = 0;
                        pEntry->ContinueTxFailCnt = 0;
                }
@@ -2072,7 +2072,7 @@ VOID NICUpdateFifoStaCounters(IN PRTMP_ADAPTER pAd)
                }
 
                i++;
-               // ASIC store 16 stack
+               /* ASIC store 16 stack */
        } while (i < (2 * TX_RING_SIZE));
 
 }
@@ -2096,9 +2096,9 @@ VOID NICUpdateFifoStaCounters(IN PRTMP_ADAPTER pAd)
 */
 VOID NICUpdateRawCounters(IN PRTMP_ADAPTER pAd)
 {
-       UINT32 OldValue;        //, Value2;
-       //ULONG PageSum, OneSecTransmitCount;
-       //ULONG TxErrorRatio, Retry, Fail;
+       UINT32 OldValue;        /*, Value2; */
+       /*ULONG PageSum, OneSecTransmitCount; */
+       /*ULONG TxErrorRatio, Retry, Fail; */
        RX_STA_CNT0_STRUC RxStaCnt0;
        RX_STA_CNT1_STRUC RxStaCnt1;
        RX_STA_CNT2_STRUC RxStaCnt2;
@@ -2123,34 +2123,34 @@ VOID NICUpdateRawCounters(IN PRTMP_ADAPTER pAd)
 
        {
                RTMP_IO_READ32(pAd, RX_STA_CNT1, &RxStaCnt1.word);
-               // Update RX PLCP error counter
+               /* Update RX PLCP error counter */
                pAd->PrivateInfo.PhyRxErrCnt += RxStaCnt1.field.PlcpErr;
-               // Update False CCA counter
+               /* Update False CCA counter */
                pAd->RalinkCounters.OneSecFalseCCACnt +=
                    RxStaCnt1.field.FalseCca;
        }
 
-       // Update FCS counters
+       /* Update FCS counters */
        OldValue = pAd->WlanCounters.FCSErrorCount.u.LowPart;
-       pAd->WlanCounters.FCSErrorCount.u.LowPart += (RxStaCnt0.field.CrcErr);  // >> 7);
+       pAd->WlanCounters.FCSErrorCount.u.LowPart += (RxStaCnt0.field.CrcErr);  /* >> 7); */
        if (pAd->WlanCounters.FCSErrorCount.u.LowPart < OldValue)
                pAd->WlanCounters.FCSErrorCount.u.HighPart++;
 
-       // Add FCS error count to private counters
+       /* Add FCS error count to private counters */
        pRalinkCounters->OneSecRxFcsErrCnt += RxStaCnt0.field.CrcErr;
        OldValue = pRalinkCounters->RealFcsErrCount.u.LowPart;
        pRalinkCounters->RealFcsErrCount.u.LowPart += RxStaCnt0.field.CrcErr;
        if (pRalinkCounters->RealFcsErrCount.u.LowPart < OldValue)
                pRalinkCounters->RealFcsErrCount.u.HighPart++;
 
-       // Update Duplicate Rcv check
+       /* Update Duplicate Rcv check */
        pRalinkCounters->DuplicateRcv += RxStaCnt2.field.RxDupliCount;
        pAd->WlanCounters.FrameDuplicateCount.u.LowPart +=
            RxStaCnt2.field.RxDupliCount;
-       // Update RX Overflow counter
+       /* Update RX Overflow counter */
        pAd->Counters8023.RxNoBuffer += (RxStaCnt2.field.RxFifoOverflowCount);
 
-       //pAd->RalinkCounters.RxCount = 0;
+       /*pAd->RalinkCounters.RxCount = 0; */
 #ifdef RTMP_MAC_USB
        if (pRalinkCounters->RxCount != pAd->watchDogRxCnt) {
                pAd->watchDogRxCnt = pRalinkCounters->RxCount;
@@ -2161,12 +2161,12 @@ VOID NICUpdateRawCounters(IN PRTMP_ADAPTER pAd)
                else
                        pAd->watchDogRxOverFlowCnt = 0;
        }
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
-       //if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED) ||
-       //      (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED) && (pAd->MacTab.Size != 1)))
+       /*if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED) || */
+       /*      (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED) && (pAd->MacTab.Size != 1))) */
        if (!pAd->bUpdateBcnCntDone) {
-               // Update BEACON sent count
+               /* Update BEACON sent count */
                RTMP_IO_READ32(pAd, TX_STA_CNT0, &TxStaCnt0.word);
                RTMP_IO_READ32(pAd, TX_STA_CNT1, &StaTx1.word);
                RTMP_IO_READ32(pAd, TX_STA_CNT2, &StaTx2.word);
@@ -2186,7 +2186,7 @@ VOID NICUpdateRawCounters(IN PRTMP_ADAPTER pAd)
                    TxStaCnt0.field.TxFailCount;
        }
 
-       //if (pAd->bStaFifoTest == TRUE)
+       /*if (pAd->bStaFifoTest == TRUE) */
        {
                RTMP_IO_READ32(pAd, TX_AGG_CNT, &TxAggCnt.word);
                RTMP_IO_READ32(pAd, TX_AGG_CNT0, &TxAggCnt0.word);
@@ -2236,7 +2236,7 @@ VOID NICUpdateRawCounters(IN PRTMP_ADAPTER pAd)
                pRalinkCounters->TxAgg16MPDUCount +=
                    TxAggCnt7.field.AggSize16Count;
 
-               // Calculate the transmitted A-MPDU count
+               /* Calculate the transmitted A-MPDU count */
                pRalinkCounters->TransmittedAMPDUCount.u.LowPart +=
                    TxAggCnt0.field.AggSize1Count;
                pRalinkCounters->TransmittedAMPDUCount.u.LowPart +=
@@ -2301,18 +2301,18 @@ VOID NICUpdateRawCounters(IN PRTMP_ADAPTER pAd)
 */
 VOID NICResetFromError(IN PRTMP_ADAPTER pAd)
 {
-       // Reset BBP (according to alex, reset ASIC will force reset BBP
-       // Therefore, skip the reset BBP
-       // RTMP_IO_WRITE32(pAd, MAC_CSR1, 0x2);
+       /* Reset BBP (according to alex, reset ASIC will force reset BBP */
+       /* Therefore, skip the reset BBP */
+       /* RTMP_IO_WRITE32(pAd, MAC_CSR1, 0x2); */
 
        RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x1);
-       // Remove ASIC from reset state
+       /* Remove ASIC from reset state */
        RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x0);
 
        NICInitializeAdapter(pAd, FALSE);
        NICInitAsicFromEEPROM(pAd);
 
-       // Switch to current channel, since during reset process, the connection should remains on.
+       /* Switch to current channel, since during reset process, the connection should remains on. */
        AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
        AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
 }
@@ -2409,7 +2409,7 @@ ULONG RTMPCompareMemory(IN PVOID pSrc1, IN PVOID pSrc2, IN ULONG Length)
                        return (2);
        }
 
-       // Equal
+       /* Equal */
        return (0);
 }
 
@@ -2506,9 +2506,9 @@ VOID UserCfgInit(IN PRTMP_ADAPTER pAd)
 
        DBGPRINT(RT_DEBUG_TRACE, ("--> UserCfgInit\n"));
 
-       //
-       //  part I. intialize common configuration
-       //
+       /* */
+       /*  part I. intialize common configuration */
+       /* */
 #ifdef RTMP_MAC_USB
        pAd->BulkOutReq = 0;
 
@@ -2519,22 +2519,22 @@ VOID UserCfgInit(IN PRTMP_ADAPTER pAd)
        pAd->BulkInComplete = 0;
        pAd->BulkInCompleteFail = 0;
 
-       //pAd->QuickTimerP = 100;
-       //pAd->TurnAggrBulkInCount = 0;
+       /*pAd->QuickTimerP = 100; */
+       /*pAd->TurnAggrBulkInCount = 0; */
        pAd->bUsbTxBulkAggre = 0;
 
-       // init as unsed value to ensure driver will set to MCU once.
+       /* init as unsed value to ensure driver will set to MCU once. */
        pAd->LedIndicatorStrength = 0xFF;
 
        pAd->CommonCfg.MaxPktOneTxBulk = 2;
        pAd->CommonCfg.TxBulkFactor = 1;
        pAd->CommonCfg.RxBulkFactor = 1;
 
-       pAd->CommonCfg.TxPower = 100;   //mW
+       pAd->CommonCfg.TxPower = 100;   /*mW */
 
        NdisZeroMemory(&pAd->CommonCfg.IOTestParm,
                       sizeof(pAd->CommonCfg.IOTestParm));
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
        for (key_index = 0; key_index < SHARE_KEY_NUM; key_index++) {
                for (bss_index = 0; bss_index < MAX_MBSSID_NUM; bss_index++) {
@@ -2556,29 +2556,29 @@ VOID UserCfgInit(IN PRTMP_ADAPTER pAd)
        pAd->HostLnkCtrlOffset = 0;
        pAd->StaCfg.PSControl.field.EnableNewPS = TRUE;
        pAd->CheckDmaBusyCount = 0;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
-       pAd->bAutoTxAgcA = FALSE;       // Default is OFF
-       pAd->bAutoTxAgcG = FALSE;       // Default is OFF
+       pAd->bAutoTxAgcA = FALSE;       /* Default is OFF */
+       pAd->bAutoTxAgcG = FALSE;       /* Default is OFF */
        pAd->RfIcType = RFIC_2820;
 
-       // Init timer for reset complete event
+       /* Init timer for reset complete event */
        pAd->CommonCfg.CentralChannel = 1;
        pAd->bForcePrintTX = FALSE;
        pAd->bForcePrintRX = FALSE;
        pAd->bStaFifoTest = FALSE;
        pAd->bProtectionTest = FALSE;
-       pAd->CommonCfg.Dsifs = 10;      // in units of usec
-       pAd->CommonCfg.TxPower = 100;   //mW
-       pAd->CommonCfg.TxPowerPercentage = 0xffffffff;  // AUTO
-       pAd->CommonCfg.TxPowerDefault = 0xffffffff;     // AUTO
-       pAd->CommonCfg.TxPreamble = Rt802_11PreambleAuto;       // use Long preamble on TX by defaut
+       pAd->CommonCfg.Dsifs = 10;      /* in units of usec */
+       pAd->CommonCfg.TxPower = 100;   /*mW */
+       pAd->CommonCfg.TxPowerPercentage = 0xffffffff;  /* AUTO */
+       pAd->CommonCfg.TxPowerDefault = 0xffffffff;     /* AUTO */
+       pAd->CommonCfg.TxPreamble = Rt802_11PreambleAuto;       /* use Long preamble on TX by defaut */
        pAd->CommonCfg.bUseZeroToDisableFragment = FALSE;
        pAd->CommonCfg.RtsThreshold = 2347;
        pAd->CommonCfg.FragmentThreshold = 2346;
-       pAd->CommonCfg.UseBGProtection = 0;     // 0: AUTO
-       pAd->CommonCfg.bEnableTxBurst = TRUE;   //0;
-       pAd->CommonCfg.PhyMode = 0xff;  // unknown
+       pAd->CommonCfg.UseBGProtection = 0;     /* 0: AUTO */
+       pAd->CommonCfg.bEnableTxBurst = TRUE;   /*0; */
+       pAd->CommonCfg.PhyMode = 0xff;  /* unknown */
        pAd->CommonCfg.BandState = UNKNOWN_BAND;
        pAd->CommonCfg.RadarDetect.CSPeriod = 10;
        pAd->CommonCfg.RadarDetect.CSCount = 0;
@@ -2607,8 +2607,8 @@ VOID UserCfgInit(IN PRTMP_ADAPTER pAd)
        pAd->CommonCfg.BACapability.field.MMPSmode = MMPS_ENABLE;
        pAd->CommonCfg.BACapability.field.MpduDensity = 0;
        pAd->CommonCfg.BACapability.field.Policy = IMMED_BA;
-       pAd->CommonCfg.BACapability.field.RxBAWinLimit = 64;    //32;
-       pAd->CommonCfg.BACapability.field.TxBAWinLimit = 64;    //32;
+       pAd->CommonCfg.BACapability.field.RxBAWinLimit = 64;    /*32; */
+       pAd->CommonCfg.BACapability.field.TxBAWinLimit = 64;    /*32; */
        DBGPRINT(RT_DEBUG_TRACE,
                 ("--> UserCfgInit. BACapability = 0x%x\n",
                  pAd->CommonCfg.BACapability.word));
@@ -2619,35 +2619,35 @@ VOID UserCfgInit(IN PRTMP_ADAPTER pAd)
        pAd->CommonCfg.bExtChannelSwitchAnnouncement = 1;
        pAd->CommonCfg.bHTProtect = 1;
        pAd->CommonCfg.bMIMOPSEnable = TRUE;
-       //2008/11/05:KH add to support Antenna power-saving of AP<--
+       /*2008/11/05:KH add to support Antenna power-saving of AP<-- */
        pAd->CommonCfg.bGreenAPEnable = FALSE;
-       //2008/11/05:KH add to support Antenna power-saving of AP-->
+       /*2008/11/05:KH add to support Antenna power-saving of AP--> */
        pAd->CommonCfg.bBADecline = FALSE;
        pAd->CommonCfg.bDisableReordering = FALSE;
 
        if (pAd->MACVersion == 0x28720200) {
-               pAd->CommonCfg.TxBASize = 13;   //by Jerry recommend
+               pAd->CommonCfg.TxBASize = 13;   /*by Jerry recommend */
        } else {
                pAd->CommonCfg.TxBASize = 7;
        }
 
        pAd->CommonCfg.REGBACapability.word = pAd->CommonCfg.BACapability.word;
 
-       //pAd->CommonCfg.HTPhyMode.field.BW = BW_20;
-       //pAd->CommonCfg.HTPhyMode.field.MCS = MCS_AUTO;
-       //pAd->CommonCfg.HTPhyMode.field.ShortGI = GI_800;
-       //pAd->CommonCfg.HTPhyMode.field.STBC = STBC_NONE;
+       /*pAd->CommonCfg.HTPhyMode.field.BW = BW_20; */
+       /*pAd->CommonCfg.HTPhyMode.field.MCS = MCS_AUTO; */
+       /*pAd->CommonCfg.HTPhyMode.field.ShortGI = GI_800; */
+       /*pAd->CommonCfg.HTPhyMode.field.STBC = STBC_NONE; */
        pAd->CommonCfg.TxRate = RATE_6;
 
        pAd->CommonCfg.MlmeTransmit.field.MCS = MCS_RATE_6;
        pAd->CommonCfg.MlmeTransmit.field.BW = BW_20;
        pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_OFDM;
 
-       pAd->CommonCfg.BeaconPeriod = 100;      // in mSec
+       pAd->CommonCfg.BeaconPeriod = 100;      /* in mSec */
 
-       //
-       // part II. intialize STA specific configuration
-       //
+       /* */
+       /* part II. intialize STA specific configuration */
+       /* */
        {
                RX_FILTER_SET_FLAG(pAd, fRX_FILTER_ACCEPT_DIRECT);
                RX_FILTER_CLEAR_FLAG(pAd, fRX_FILTER_ACCEPT_MULTICAST);
@@ -2662,7 +2662,7 @@ VOID UserCfgInit(IN PRTMP_ADAPTER pAd)
                pAd->StaCfg.bMixCipher = FALSE;
                pAd->StaCfg.DefaultKeyId = 0;
 
-               // 802.1x port control
+               /* 802.1x port control */
                pAd->StaCfg.PrivacyFilter = Ndis802_11PrivFilter8021xWEP;
                pAd->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
                pAd->StaCfg.LastMicErrorTime = 0;
@@ -2670,15 +2670,15 @@ VOID UserCfgInit(IN PRTMP_ADAPTER pAd)
                pAd->StaCfg.bBlockAssoc = FALSE;
                pAd->StaCfg.WpaState = SS_NOTUSE;
 
-               pAd->CommonCfg.NdisRadioStateOff = FALSE;       // New to support microsoft disable radio with OID command
+               pAd->CommonCfg.NdisRadioStateOff = FALSE;       /* New to support microsoft disable radio with OID command */
 
                pAd->StaCfg.RssiTrigger = 0;
                NdisZeroMemory(&pAd->StaCfg.RssiSample, sizeof(RSSI_SAMPLE));
                pAd->StaCfg.RssiTriggerMode =
                    RSSI_TRIGGERED_UPON_BELOW_THRESHOLD;
                pAd->StaCfg.AtimWin = 0;
-               pAd->StaCfg.DefaultListenCount = 3;     //default listen count;
-               pAd->StaCfg.BssType = BSS_INFRA;        // BSS_INFRA or BSS_ADHOC or BSS_MONITOR
+               pAd->StaCfg.DefaultListenCount = 3;     /*default listen count; */
+               pAd->StaCfg.BssType = BSS_INFRA;        /* BSS_INFRA or BSS_ADHOC or BSS_MONITOR */
                pAd->StaCfg.bScanReqIsFromWebUI = FALSE;
                OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE);
                OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_WAKEUP_NOW);
@@ -2690,23 +2690,23 @@ VOID UserCfgInit(IN PRTMP_ADAPTER pAd)
 #ifdef PCIE_PS_SUPPORT
        pAd->brt30xxBanMcuCmd = FALSE;
        pAd->b3090ESpecialChip = FALSE;
-//KH Debug:the following must be removed
+/*KH Debug:the following must be removed */
        pAd->StaCfg.PSControl.field.rt30xxPowerMode = 3;
        pAd->StaCfg.PSControl.field.rt30xxForceASPMTest = 0;
        pAd->StaCfg.PSControl.field.rt30xxFollowHostASPM = 1;
-#endif // PCIE_PS_SUPPORT //
+#endif /* PCIE_PS_SUPPORT // */
 
-       // global variables mXXXX used in MAC protocol state machines
+       /* global variables mXXXX used in MAC protocol state machines */
        OPSTATUS_SET_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM);
        OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_ADHOC_ON);
        OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_INFRA_ON);
 
-       // PHY specification
-       pAd->CommonCfg.PhyMode = PHY_11BG_MIXED;        // default PHY mode
-       OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);     // CCK use LONG preamble
+       /* PHY specification */
+       pAd->CommonCfg.PhyMode = PHY_11BG_MIXED;        /* default PHY mode */
+       OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);     /* CCK use LONG preamble */
 
        {
-               // user desired power mode
+               /* user desired power mode */
                pAd->StaCfg.WindowsPowerMode = Ndis802_11PowerModeCAM;
                pAd->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeCAM;
                pAd->StaCfg.bWindowsACCAMEnable = FALSE;
@@ -2716,20 +2716,20 @@ VOID UserCfgInit(IN PRTMP_ADAPTER pAd)
                              pAd, FALSE);
                pAd->StaCfg.StaQuickResponeForRateUpTimerRunning = FALSE;
 
-               // Patch for Ndtest
+               /* Patch for Ndtest */
                pAd->StaCfg.ScanCnt = 0;
 
-               pAd->StaCfg.bHwRadio = TRUE;    // Default Hardware Radio status is On
-               pAd->StaCfg.bSwRadio = TRUE;    // Default Software Radio status is On
-               pAd->StaCfg.bRadio = TRUE;      // bHwRadio && bSwRadio
-               pAd->StaCfg.bHardwareRadio = FALSE;     // Default is OFF
-               pAd->StaCfg.bShowHiddenSSID = FALSE;    // Default no show
+               pAd->StaCfg.bHwRadio = TRUE;    /* Default Hardware Radio status is On */
+               pAd->StaCfg.bSwRadio = TRUE;    /* Default Software Radio status is On */
+               pAd->StaCfg.bRadio = TRUE;      /* bHwRadio && bSwRadio */
+               pAd->StaCfg.bHardwareRadio = FALSE;     /* Default is OFF */
+               pAd->StaCfg.bShowHiddenSSID = FALSE;    /* Default no show */
 
-               // Nitro mode control
+               /* Nitro mode control */
                pAd->StaCfg.bAutoReconnect = TRUE;
 
-               // Save the init time as last scan time, the system should do scan after 2 seconds.
-               // This patch is for driver wake up from standby mode, system will do scan right away.
+               /* Save the init time as last scan time, the system should do scan after 2 seconds. */
+               /* This patch is for driver wake up from standby mode, system will do scan right away. */
                NdisGetSystemUpTime(&pAd->StaCfg.LastScanTime);
                if (pAd->StaCfg.LastScanTime > 10 * OS_HZ)
                        pAd->StaCfg.LastScanTime -= (10 * OS_HZ);
@@ -2737,10 +2737,10 @@ VOID UserCfgInit(IN PRTMP_ADAPTER pAd)
                NdisZeroMemory(pAd->nickname, IW_ESSID_MAX_SIZE + 1);
 #ifdef RTMP_MAC_PCI
                sprintf((PSTRING) pAd->nickname, "RT2860STA");
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 #ifdef RTMP_MAC_USB
                sprintf((PSTRING) pAd->nickname, "RT2870STA");
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
                RTMPInitTimer(pAd, &pAd->StaCfg.WpaDisassocAndBlockAssocTimer,
                              GET_TIMER_FUNCTION(WpaDisassocApAndBlockAssoc),
                              pAd, FALSE);
@@ -2760,83 +2760,83 @@ VOID UserCfgInit(IN PRTMP_ADAPTER pAd)
                pAd->StaCfg.bForceTxBurst = FALSE;
        }
 
-       // Default for extra information is not valid
+       /* Default for extra information is not valid */
        pAd->ExtraInfo = EXTRA_INFO_CLEAR;
 
-       // Default Config change flag
+       /* Default Config change flag */
        pAd->bConfigChanged = FALSE;
 
-       //
-       // part III. AP configurations
-       //
+       /* */
+       /* part III. AP configurations */
+       /* */
 
-       //
-       // part IV. others
-       //
-       // dynamic BBP R66:sensibity tuning to overcome background noise
+       /* */
+       /* part IV. others */
+       /* */
+       /* dynamic BBP R66:sensibity tuning to overcome background noise */
        pAd->BbpTuning.bEnable = TRUE;
        pAd->BbpTuning.FalseCcaLowerThreshold = 100;
        pAd->BbpTuning.FalseCcaUpperThreshold = 512;
        pAd->BbpTuning.R66Delta = 4;
        pAd->Mlme.bEnableAutoAntennaCheck = TRUE;
 
-       //
-       // Also initial R66CurrentValue, RTUSBResumeMsduTransmission might use this value.
-       // if not initial this value, the default value will be 0.
-       //
+       /* */
+       /* Also initial R66CurrentValue, RTUSBResumeMsduTransmission might use this value. */
+       /* if not initial this value, the default value will be 0. */
+       /* */
        pAd->BbpTuning.R66CurrentValue = 0x38;
 
        pAd->Bbp94 = BBPR94_DEFAULT;
        pAd->BbpForCCK = FALSE;
 
-       // Default is FALSE for test bit 1
-       //pAd->bTest1 = FALSE;
+       /* Default is FALSE for test bit 1 */
+       /*pAd->bTest1 = FALSE; */
 
-       // initialize MAC table and allocate spin lock
+       /* initialize MAC table and allocate spin lock */
        NdisZeroMemory(&pAd->MacTab, sizeof(MAC_TABLE));
        InitializeQueueHeader(&pAd->MacTab.McastPsQueue);
        NdisAllocateSpinLock(&pAd->MacTabLock);
 
-       //RTMPInitTimer(pAd, &pAd->RECBATimer, RECBATimerTimeout, pAd, TRUE);
-       //RTMPSetTimer(&pAd->RECBATimer, REORDER_EXEC_INTV);
+       /*RTMPInitTimer(pAd, &pAd->RECBATimer, RECBATimerTimeout, pAd, TRUE); */
+       /*RTMPSetTimer(&pAd->RECBATimer, REORDER_EXEC_INTV); */
 
        pAd->CommonCfg.bWiFiTest = FALSE;
 #ifdef RTMP_MAC_PCI
        pAd->bPCIclkOff = FALSE;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
        RTMP_SET_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP);
        DBGPRINT(RT_DEBUG_TRACE, ("<-- UserCfgInit\n"));
 }
 
-// IRQL = PASSIVE_LEVEL
+/* IRQL = PASSIVE_LEVEL */
 UCHAR BtoH(STRING ch)
 {
        if (ch >= '0' && ch <= '9')
-               return (ch - '0');      // Handle numerals
+               return (ch - '0');      /* Handle numerals */
        if (ch >= 'A' && ch <= 'F')
-               return (ch - 'A' + 0xA);        // Handle capitol hex digits
+               return (ch - 'A' + 0xA);        /* Handle capitol hex digits */
        if (ch >= 'a' && ch <= 'f')
-               return (ch - 'a' + 0xA);        // Handle small hex digits
+               return (ch - 'a' + 0xA);        /* Handle small hex digits */
        return (255);
 }
 
-//
-//  FUNCTION: AtoH(char *, UCHAR *, int)
-//
-//  PURPOSE:  Converts ascii string to network order hex
-//
-//  PARAMETERS:
-//    src    - pointer to input ascii string
-//    dest   - pointer to output hex
-//    destlen - size of dest
-//
-//  COMMENTS:
-//
-//    2 ascii bytes make a hex byte so must put 1st ascii byte of pair
-//    into upper nibble and 2nd ascii byte of pair into lower nibble.
-//
-// IRQL = PASSIVE_LEVEL
+/* */
+/*  FUNCTION: AtoH(char *, UCHAR *, int) */
+/* */
+/*  PURPOSE:  Converts ascii string to network order hex */
+/* */
+/*  PARAMETERS: */
+/*    src    - pointer to input ascii string */
+/*    dest   - pointer to output hex */
+/*    destlen - size of dest */
+/* */
+/*  COMMENTS: */
+/* */
+/*    2 ascii bytes make a hex byte so must put 1st ascii byte of pair */
+/*    into upper nibble and 2nd ascii byte of pair into lower nibble. */
+/* */
+/* IRQL = PASSIVE_LEVEL */
 
 void AtoH(PSTRING src, PUCHAR dest, int destlen)
 {
@@ -2847,14 +2847,14 @@ void AtoH(PSTRING src, PUCHAR dest, int destlen)
        destTemp = (PUCHAR) dest;
 
        while (destlen--) {
-               *destTemp = BtoH(*srcptr++) << 4;       // Put 1st ascii byte in upper nibble.
-               *destTemp += BtoH(*srcptr++);   // Add 2nd ascii byte to above.
+               *destTemp = BtoH(*srcptr++) << 4;       /* Put 1st ascii byte in upper nibble. */
+               *destTemp += BtoH(*srcptr++);   /* Add 2nd ascii byte to above. */
                destTemp++;
        }
 }
 
-//+++Mark by shiang, not use now, need to remove after confirm
-//---Mark by shiang, not use now, need to remove after confirm
+/*+++Mark by shiang, not use now, need to remove after confirm */
+/*---Mark by shiang, not use now, need to remove after confirm */
 
 /*
        ========================================================================
@@ -2879,11 +2879,11 @@ VOID RTMPInitTimer(IN PRTMP_ADAPTER pAd,
                   IN PRALINK_TIMER_STRUCT pTimer,
                   IN PVOID pTimerFunc, IN PVOID pData, IN BOOLEAN Repeat)
 {
-       //
-       // Set Valid to TRUE for later used.
-       // It will crash if we cancel a timer or set a timer
-       // that we haven't initialize before.
-       //
+       /* */
+       /* Set Valid to TRUE for later used. */
+       /* It will crash if we cancel a timer or set a timer */
+       /* that we haven't initialize before. */
+       /* */
        pTimer->Valid = TRUE;
 
        pTimer->PeriodicType = Repeat;
@@ -2892,7 +2892,7 @@ VOID RTMPInitTimer(IN PRTMP_ADAPTER pAd,
 
 #ifdef RTMP_TIMER_TASK_SUPPORT
        pTimer->pAd = pAd;
-#endif // RTMP_TIMER_TASK_SUPPORT //
+#endif /* RTMP_TIMER_TASK_SUPPORT // */
 
        RTMP_OS_Init_Timer(pAd, &pTimer->TimerObj, pTimerFunc, (PVOID) pTimer);
 }
@@ -3001,10 +3001,10 @@ VOID RTMPCancelTimer(IN PRALINK_TIMER_STRUCT pTimer, OUT BOOLEAN * pCancelled)
                        pTimer->State = TRUE;
 
 #ifdef RTMP_TIMER_TASK_SUPPORT
-               // We need to go-through the TimerQ to findout this timer handler and remove it if
-               //              it's still waiting for execution.
+               /* We need to go-through the TimerQ to findout this timer handler and remove it if */
+               /*              it's still waiting for execution. */
                RtmpTimerQRemove(pTimer->pAd, pTimer);
-#endif // RTMP_TIMER_TASK_SUPPORT //
+#endif /* RTMP_TIMER_TASK_SUPPORT // */
        } else {
                DBGPRINT_ERR(("RTMPCancelTimer failed, Timer hasn't been initialize!\n"));
        }
@@ -3032,7 +3032,7 @@ VOID RTMPCancelTimer(IN PRALINK_TIMER_STRUCT pTimer, OUT BOOLEAN * pCancelled)
 */
 VOID RTMPSetLED(IN PRTMP_ADAPTER pAd, IN UCHAR Status)
 {
-       //ULONG                 data;
+       /*ULONG                 data; */
        UCHAR HighByte = 0;
        UCHAR LowByte;
 
@@ -3055,7 +3055,7 @@ VOID RTMPSetLED(IN PRTMP_ADAPTER pAd, IN UCHAR Status)
                AsicSendCommandToMcu(pAd, 0x50, 0xff, LowByte, HighByte);
                break;
        case LED_HALT:
-               LowByte = 0;    // Driver sets MAC register and MAC controls LED
+               LowByte = 0;    /* Driver sets MAC register and MAC controls LED */
        case LED_RADIO_OFF:
                HighByte = 0;
                AsicSendCommandToMcu(pAd, 0x50, 0xff, LowByte, HighByte);
@@ -3078,10 +3078,10 @@ VOID RTMPSetLED(IN PRTMP_ADAPTER pAd, IN UCHAR Status)
                break;
        }
 
-       //
-       // Keep LED status for LED SiteSurvey mode.
-       // After SiteSurvey, we will set the LED mode to previous status.
-       //
+       /* */
+       /* Keep LED status for LED SiteSurvey mode. */
+       /* After SiteSurvey, we will set the LED mode to previous status. */
+       /* */
        if ((Status != LED_ON_SITE_SURVEY) && (Status != LED_POWER_UP))
                pAd->LedStatus = Status;
 
@@ -3135,9 +3135,9 @@ VOID RTMPSetSignalLED(IN PRTMP_ADAPTER pAd, IN NDIS_802_11_RSSI Dbm)
                else
                        nLed = 31;
 
-               //
-               // Update Signal Stregth to firmware if changed.
-               //
+               /* */
+               /* Update Signal Stregth to firmware if changed. */
+               /* */
                if (pAd->LedIndicatorStrength != nLed) {
                        AsicSendCommandToMcu(pAd, 0x51, 0xff, nLed,
                                             pAd->LedCntl.field.Polarity);
@@ -3166,25 +3166,25 @@ VOID RTMPSetSignalLED(IN PRTMP_ADAPTER pAd, IN NDIS_802_11_RSSI Dbm)
 */
 VOID RTMPEnableRxTx(IN PRTMP_ADAPTER pAd)
 {
-//      WPDMA_GLO_CFG_STRUC     GloCfg;
-//      ULONG   i = 0;
+/*      WPDMA_GLO_CFG_STRUC     GloCfg; */
+/*      ULONG   i = 0; */
        UINT32 rx_filter_flag;
 
        DBGPRINT(RT_DEBUG_TRACE, ("==> RTMPEnableRxTx\n"));
 
-       // Enable Rx DMA.
+       /* Enable Rx DMA. */
        RT28XXDMAEnable(pAd);
 
-       // enable RX of MAC block
+       /* enable RX of MAC block */
        if (pAd->OpMode == OPMODE_AP) {
                rx_filter_flag = APNORMAL;
 
-               RTMP_IO_WRITE32(pAd, RX_FILTR_CFG, rx_filter_flag);     // enable RX of DMA block
+               RTMP_IO_WRITE32(pAd, RX_FILTR_CFG, rx_filter_flag);     /* enable RX of DMA block */
        } else {
                if (pAd->CommonCfg.PSPXlink)
                        rx_filter_flag = PSPXLINK;
                else
-                       rx_filter_flag = STANORMAL;     // Staion not drop control frame will fail WiFi Certification.
+                       rx_filter_flag = STANORMAL;     /* Staion not drop control frame will fail WiFi Certification. */
                RTMP_IO_WRITE32(pAd, RX_FILTR_CFG, rx_filter_flag);
        }
 
@@ -3192,7 +3192,7 @@ VOID RTMPEnableRxTx(IN PRTMP_ADAPTER pAd)
        DBGPRINT(RT_DEBUG_TRACE, ("<== RTMPEnableRxTx\n"));
 }
 
-//+++Add by shiang, move from os/linux/rt_main_dev.c
+/*+++Add by shiang, move from os/linux/rt_main_dev.c */
 void CfgInitHook(PRTMP_ADAPTER pAd)
 {
        pAd->bBroadComHT = TRUE;
@@ -3208,9 +3208,9 @@ int rt28xx_init(IN PRTMP_ADAPTER pAd,
 
 #ifdef RTMP_MAC_PCI
        {
-               // If dirver doesn't wake up firmware here,
-               // NICLoadFirmware will hang forever when interface is up again.
-               // RT2860 PCI
+               /* If dirver doesn't wake up firmware here, */
+               /* NICLoadFirmware will hang forever when interface is up again. */
+               /* RT2860 PCI */
                if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) &&
                    OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_PCIE_DEVICE)) {
                        AUTO_WAKEUP_STRUC AutoWakeupCfg;
@@ -3221,17 +3221,17 @@ int rt28xx_init(IN PRTMP_ADAPTER pAd,
                        OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE);
                }
        }
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
-       // reset Adapter flags
+       /* reset Adapter flags */
        RTMP_CLEAR_FLAGS(pAd);
 
-       // Init BssTab & ChannelInfo tabbles for auto channel select.
+       /* Init BssTab & ChannelInfo tabbles for auto channel select. */
 
-       // Allocate BA Reordering memory
+       /* Allocate BA Reordering memory */
        ba_reordering_resource_init(pAd, MAX_REORDERING_MPDU_NUM);
 
-       // Make sure MAC gets ready.
+       /* Make sure MAC gets ready. */
        index = 0;
        do {
                RTMP_IO_READ32(pAd, MAC_CSR0, &MacCsr0);
@@ -3256,16 +3256,16 @@ int rt28xx_init(IN PRTMP_ADAPTER pAd,
                RTMP_IO_WRITE32(pAd, AUX_CTRL, MacCsr0);
                DBGPRINT(RT_DEBUG_TRACE, ("AUX_CTRL = 0x%x\n", MacCsr0));
        }
-#endif // PCIE_PS_SUPPORT //
+#endif /* PCIE_PS_SUPPORT // */
 
-       // To fix driver disable/enable hang issue when radio off
+       /* To fix driver disable/enable hang issue when radio off */
        RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0x2);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
-       // Disable DMA
+       /* Disable DMA */
        RT28XXDMADisable(pAd);
 
-       // Load 8051 firmware
+       /* Load 8051 firmware */
        Status = NICLoadFirmware(pAd);
        if (Status != NDIS_STATUS_SUCCESS) {
                DBGPRINT_ERR(("NICLoadFirmware failed, Status[=0x%08x]\n",
@@ -3275,13 +3275,13 @@ int rt28xx_init(IN PRTMP_ADAPTER pAd,
 
        NICLoadRateSwitchingParams(pAd);
 
-       // Disable interrupts here which is as soon as possible
-       // This statement should never be true. We might consider to remove it later
+       /* Disable interrupts here which is as soon as possible */
+       /* This statement should never be true. We might consider to remove it later */
 #ifdef RTMP_MAC_PCI
        if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE)) {
                RTMP_ASIC_INTERRUPT_DISABLE(pAd);
        }
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
        Status = RTMPAllocTxRxRingMemory(pAd);
        if (Status != NDIS_STATUS_SUCCESS) {
@@ -3292,8 +3292,8 @@ int rt28xx_init(IN PRTMP_ADAPTER pAd,
 
        RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
 
-       // initialize MLME
-       //
+       /* initialize MLME */
+       /* */
 
        Status = RtmpMgmtTaskInit(pAd);
        if (Status != NDIS_STATUS_SUCCESS)
@@ -3304,15 +3304,15 @@ int rt28xx_init(IN PRTMP_ADAPTER pAd,
                DBGPRINT_ERR(("MlmeInit failed, Status[=0x%08x]\n", Status));
                goto err2;
        }
-       // Initialize pAd->StaCfg, pAd->ApCfg, pAd->CommonCfg to manufacture default
-       //
+       /* Initialize pAd->StaCfg, pAd->ApCfg, pAd->CommonCfg to manufacture default */
+       /* */
        UserCfgInit(pAd);
        Status = RtmpNetTaskInit(pAd);
        if (Status != NDIS_STATUS_SUCCESS)
                goto err3;
 
-//      COPY_MAC_ADDR(pAd->ApCfg.MBSSID[apidx].Bssid, netif->hwaddr);
-//      pAd->bForcePrintTX = TRUE;
+/*      COPY_MAC_ADDR(pAd->ApCfg.MBSSID[apidx].Bssid, netif->hwaddr); */
+/*      pAd->bForcePrintTX = TRUE; */
 
        CfgInitHook(pAd);
 
@@ -3321,9 +3321,9 @@ int rt28xx_init(IN PRTMP_ADAPTER pAd,
        MeasureReqTabInit(pAd);
        TpcReqTabInit(pAd);
 
-       //
-       // Init the hardware, we need to init asic before read registry, otherwise mac register will be reset
-       //
+       /* */
+       /* Init the hardware, we need to init asic before read registry, otherwise mac register will be reset */
+       /* */
        Status = NICInitializeAdapter(pAd, TRUE);
        if (Status != NDIS_STATUS_SUCCESS) {
                DBGPRINT_ERR(("NICInitializeAdapter failed, Status[=0x%08x]\n",
@@ -3341,10 +3341,10 @@ int rt28xx_init(IN PRTMP_ADAPTER pAd,
                pAd->CommonCfg.NumOfBulkInIRP = RX_RING_SIZE;
        else
                pAd->CommonCfg.NumOfBulkInIRP = 1;
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
-       //Init Ba Capability parameters.
-//      RT28XX_BA_INIT(pAd);
+       /*Init Ba Capability parameters. */
+/*      RT28XX_BA_INIT(pAd); */
        pAd->CommonCfg.DesiredHtPhy.MpduDensity =
            (UCHAR) pAd->CommonCfg.BACapability.field.MpduDensity;
        pAd->CommonCfg.DesiredHtPhy.AmsduEnable =
@@ -3353,7 +3353,7 @@ int rt28xx_init(IN PRTMP_ADAPTER pAd,
            (USHORT) pAd->CommonCfg.BACapability.field.AmsduSize;
        pAd->CommonCfg.DesiredHtPhy.MimoPs =
            (USHORT) pAd->CommonCfg.BACapability.field.MMPSmode;
-       // UPdata to HT IE
+       /* UPdata to HT IE */
        pAd->CommonCfg.HtCapability.HtCapInfo.MimoPs =
            (USHORT) pAd->CommonCfg.BACapability.field.MMPSmode;
        pAd->CommonCfg.HtCapability.HtCapInfo.AMsduSize =
@@ -3361,29 +3361,29 @@ int rt28xx_init(IN PRTMP_ADAPTER pAd,
        pAd->CommonCfg.HtCapability.HtCapParm.MpduDensity =
            (UCHAR) pAd->CommonCfg.BACapability.field.MpduDensity;
 
-       // after reading Registry, we now know if in AP mode or STA mode
+       /* after reading Registry, we now know if in AP mode or STA mode */
 
-       // Load 8051 firmware; crash when FW image not existent
-       // Status = NICLoadFirmware(pAd);
-       // if (Status != NDIS_STATUS_SUCCESS)
-       //    break;
+       /* Load 8051 firmware; crash when FW image not existent */
+       /* Status = NICLoadFirmware(pAd); */
+       /* if (Status != NDIS_STATUS_SUCCESS) */
+       /*    break; */
 
        DBGPRINT(RT_DEBUG_OFF, ("2. Phy Mode = %d\n", pAd->CommonCfg.PhyMode));
 
-       // We should read EEPROM for all cases.  rt2860b
+       /* We should read EEPROM for all cases.  rt2860b */
        NICReadEEPROMParameters(pAd, (PUCHAR) pDefaultMac);
 
        DBGPRINT(RT_DEBUG_OFF, ("3. Phy Mode = %d\n", pAd->CommonCfg.PhyMode));
 
-       NICInitAsicFromEEPROM(pAd);     //rt2860b
+       NICInitAsicFromEEPROM(pAd);     /*rt2860b */
 
-       // Set PHY to appropriate mode
+       /* Set PHY to appropriate mode */
        TmpPhy = pAd->CommonCfg.PhyMode;
        pAd->CommonCfg.PhyMode = 0xff;
        RTMPSetPhyMode(pAd, TmpPhy);
        SetCommonHT(pAd);
 
-       // No valid channels.
+       /* No valid channels. */
        if (pAd->ChannelListNum == 0) {
                DBGPRINT(RT_DEBUG_ERROR,
                         ("Wrong configuration. No valid channel found. Check \"ContryCode\" and \"ChannelGeography\" setting.\n"));
@@ -3399,35 +3399,35 @@ int rt28xx_init(IN PRTMP_ADAPTER pAd,
                  pAd->CommonCfg.HtCapability.MCSSet[4]));
 
 #ifdef RTMP_RF_RW_SUPPORT
-       //Init RT30xx RFRegisters after read RFIC type from EEPROM
+       /*Init RT30xx RFRegisters after read RFIC type from EEPROM */
        NICInitRFRegisters(pAd);
-#endif // RTMP_RF_RW_SUPPORT //
+#endif /* RTMP_RF_RW_SUPPORT // */
 
-//              APInitialize(pAd);
+/*              APInitialize(pAd); */
 
-       //
-       // Initialize RF register to default value
-       //
+       /* */
+       /* Initialize RF register to default value */
+       /* */
        AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
        AsicLockChannel(pAd, pAd->CommonCfg.Channel);
 
-       // 8051 firmware require the signal during booting time.
-       //2008/11/28:KH marked the following codes to patch Frequency offset bug
-       //AsicSendCommandToMcu(pAd, 0x72, 0xFF, 0x00, 0x00);
+       /* 8051 firmware require the signal during booting time. */
+       /*2008/11/28:KH marked the following codes to patch Frequency offset bug */
+       /*AsicSendCommandToMcu(pAd, 0x72, 0xFF, 0x00, 0x00); */
 
        if (pAd && (Status != NDIS_STATUS_SUCCESS)) {
-               //
-               // Undo everything if it failed
-               //
+               /* */
+               /* Undo everything if it failed */
+               /* */
                if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE)) {
-//                      NdisMDeregisterInterrupt(&pAd->Interrupt);
+/*                      NdisMDeregisterInterrupt(&pAd->Interrupt); */
                        RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
                }
-//              RTMPFreeAdapter(pAd); // we will free it in disconnect()
+/*              RTMPFreeAdapter(pAd); // we will free it in disconnect() */
        } else if (pAd) {
-               // Microsoft HCT require driver send a disconnect event after driver initialization.
+               /* Microsoft HCT require driver send a disconnect event after driver initialization. */
                OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
-//              pAd->IndicateMediaState = NdisMediaStateDisconnected;
+/*              pAd->IndicateMediaState = NdisMediaStateDisconnected; */
                RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_MEDIA_STATE_CHANGE);
 
                DBGPRINT(RT_DEBUG_TRACE,
@@ -3437,18 +3437,18 @@ int rt28xx_init(IN PRTMP_ADAPTER pAd,
                RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS);
                RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS);
 
-               //
-               // Support multiple BulkIn IRP,
-               // the value on pAd->CommonCfg.NumOfBulkInIRP may be large than 1.
-               //
+               /* */
+               /* Support multiple BulkIn IRP, */
+               /* the value on pAd->CommonCfg.NumOfBulkInIRP may be large than 1. */
+               /* */
                for (index = 0; index < pAd->CommonCfg.NumOfBulkInIRP; index++) {
                        RTUSBBulkReceive(pAd);
                        DBGPRINT(RT_DEBUG_TRACE, ("RTUSBBulkReceive!\n"));
                }
-#endif // RTMP_MAC_USB //
-       }                       // end of else
+#endif /* RTMP_MAC_USB // */
+       }                       /* end of else */
 
-       // Set up the Mac address
+       /* Set up the Mac address */
        RtmpOSNetDevAddrSet(pAd->net_dev, &pAd->CurrentAddress[0]);
 
        DBGPRINT_S(Status, ("<==== rt28xx_init, Status=%x\n", Status));
@@ -3462,19 +3462,19 @@ err2:
        RTMPFreeTxRxRingMemory(pAd);
 err1:
 
-       os_free_mem(pAd, pAd->mpdu_blk_pool.mem);       // free BA pool
+       os_free_mem(pAd, pAd->mpdu_blk_pool.mem);       /* free BA pool */
 
-       // shall not set priv to NULL here because the priv didn't been free yet.
-       //net_dev->ml_priv = 0;
+       /* shall not set priv to NULL here because the priv didn't been free yet. */
+       /*net_dev->ml_priv = 0; */
 #ifdef ST
 err0:
-#endif // ST //
+#endif /* ST // */
 
        DBGPRINT(RT_DEBUG_ERROR, ("!!! rt28xx Initialized fail !!!\n"));
        return FALSE;
 }
 
-//---Add by shiang, move from os/linux/rt_main_dev.c
+/*---Add by shiang, move from os/linux/rt_main_dev.c */
 
 static INT RtmpChipOpsRegister(IN RTMP_ADAPTER * pAd, IN INT infType)
 {
@@ -3494,13 +3494,13 @@ static INT RtmpChipOpsRegister(IN RTMP_ADAPTER * pAd, IN INT infType)
                pChipOps->eraseFirmware = RtmpAsicEraseFirmware;
                pChipOps->sendCommandToMcu = RtmpAsicSendCommandToMcu;
                break;
-#endif // RTMP_PCI_SUPPORT //
+#endif /* RTMP_PCI_SUPPORT // */
 #ifdef RTMP_USB_SUPPORT
        case RTMP_DEV_INF_USB:
                pChipOps->loadFirmware = RtmpAsicLoadFirmware;
                pChipOps->sendCommandToMcu = RtmpAsicSendCommandToMcu;
                break;
-#endif // RTMP_USB_SUPPORT //
+#endif /* RTMP_USB_SUPPORT // */
        default:
                break;
        }
@@ -3510,9 +3510,9 @@ static INT RtmpChipOpsRegister(IN RTMP_ADAPTER * pAd, IN INT infType)
 
 INT RtmpRaDevCtrlInit(IN RTMP_ADAPTER * pAd, IN RTMP_INF_TYPE infType)
 {
-       //VOID  *handle;
+       /*VOID  *handle; */
 
-       // Assign the interface type. We need use it when do register/EEPROM access.
+       /* Assign the interface type. We need use it when do register/EEPROM access. */
        pAd->infType = infType;
 
        pAd->OpMode = OPMODE_STA;
@@ -3528,7 +3528,7 @@ INT RtmpRaDevCtrlInit(IN RTMP_ADAPTER * pAd, IN RTMP_INF_TYPE infType)
                         ("Allocate vendor request temp buffer failed!\n"));
                return FALSE;
        }
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
        RtmpChipOpsRegister(pAd, infType);
 
@@ -3543,7 +3543,7 @@ BOOLEAN RtmpRaDevCtrlExit(IN RTMP_ADAPTER * pAd)
        return TRUE;
 }
 
-// not yet support MBSS
+/* not yet support MBSS */
 PNET_DEV get_netdev_from_bssid(IN PRTMP_ADAPTER pAd, IN UCHAR FromWhichBSSID)
 {
        PNET_DEV dev_p = NULL;
index d962f02..09d46f7 100644 (file)
 
 #include <linux/bitrev.h>
 
-//#define BIN_IN_FILE /* use *.bin firmware */
-
 #ifdef RTMP_MAC_USB
-//
-// RT2870 Firmware Spec only used 1 oct for version expression
-//
+/* */
+/* RT2870 Firmware Spec only used 1 oct for version expression */
+/* */
 #define FIRMWARE_MINOR_VERSION 7
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
-// New 8k byte firmware size for RT3071/RT3072
+/* New 8k byte firmware size for RT3071/RT3072 */
 #define FIRMWAREIMAGE_MAX_LENGTH       0x2000
 #define FIRMWAREIMAGE_LENGTH                   (sizeof (FirmwareImage) / sizeof(UCHAR))
 #define FIRMWARE_MAJOR_VERSION         0
@@ -67,7 +65,7 @@
 
 #ifdef RTMP_MAC_PCI
 #define FIRMWARE_MINOR_VERSION         2
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
 /*
        ========================================================================
@@ -120,7 +118,7 @@ NDIS_STATUS RtmpAsicLoadFirmware(IN PRTMP_ADAPTER pAd)
        UINT32 Version = (pAd->MACVersion >> 16);
 #endif
 
-       // New 8k byte firmware size for RT3071/RT3072
+       /* New 8k byte firmware size for RT3071/RT3072 */
        {
 #ifdef RTMP_MAC_PCI
                if (IS_RT3090(pAd) || IS_RT3390(pAd)) {
@@ -130,24 +128,24 @@ NDIS_STATUS RtmpAsicLoadFirmware(IN PRTMP_ADAPTER pAd)
                        pFirmwareImage = FirmwareImage_2860;
                        FileLength = FIRMWAREIMAGE_MAX_LENGTH;
                }
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 #ifdef RTMP_MAC_USB
                /* the firmware image consists of two parts */
                if ((Version != 0x2860) && (Version != 0x2872) && (Version != 0x3070)) {        /* use the second part */
-                       //printk("KH:Use New Version,part2\n");
+                       /*printk("KH:Use New Version,part2\n"); */
                        pFirmwareImage =
                            (PUCHAR) &
                            FirmwareImage_3070[FIRMWAREIMAGEV1_LENGTH];
                        FileLength = FIRMWAREIMAGEV2_LENGTH;
                } else {
-                       //printk("KH:Use New Version,part1\n");
+                       /*printk("KH:Use New Version,part1\n"); */
                        if (Version == 0x3070)
                                pFirmwareImage = FirmwareImage_3070;
                        else
                                pFirmwareImage = FirmwareImage_2870;
                        FileLength = FIRMWAREIMAGEV1_LENGTH;
                }
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
        }
 
        RTMP_WRITE_FIRMWARE(pAd, pFirmwareImage, FileLength);
@@ -183,8 +181,8 @@ INT RtmpAsicSendCommandToMcu(IN PRTMP_ADAPTER pAd,
        ULONG i = 0;
 
 #ifdef PCIE_PS_SUPPORT
-       // 3090F power solution 3 has hw limitation that needs to ban all mcu command
-       // when firmware is in radio state.  For other chip doesn't have this limitation.
+       /* 3090F power solution 3 has hw limitation that needs to ban all mcu command */
+       /* when firmware is in radio state.  For other chip doesn't have this limitation. */
        if (((IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd))
             && IS_VERSION_AFTER_F(pAd)) && IS_VERSION_AFTER_F(pAd)
            && (pAd->StaCfg.PSControl.field.rt30xxPowerMode == 3)
@@ -228,7 +226,7 @@ INT RtmpAsicSendCommandToMcu(IN PRTMP_ADAPTER pAd,
                        return FALSE;
                }
 
-               H2MMailbox.field.Owner = 1;     // pass ownership to MCU
+               H2MMailbox.field.Owner = 1;     /* pass ownership to MCU */
                H2MMailbox.field.CmdToken = Token;
                H2MMailbox.field.HighByte = Arg1;
                H2MMailbox.field.LowByte = Arg0;
@@ -239,7 +237,7 @@ INT RtmpAsicSendCommandToMcu(IN PRTMP_ADAPTER pAd,
                RTMP_IO_FORCE_WRITE32(pAd, HOST_CMD_CSR, H2MCmd.word);
 
        } else
-#endif // PCIE_PS_SUPPORT //
+#endif /* PCIE_PS_SUPPORT // */
        {
                do {
                        RTMP_IO_READ32(pAd, H2M_MAILBOX_CSR, &H2MMailbox.word);
@@ -251,16 +249,16 @@ INT RtmpAsicSendCommandToMcu(IN PRTMP_ADAPTER pAd,
 
                if (i > 100) {
 #ifdef RTMP_MAC_PCI
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
                        {
                                DBGPRINT_ERR(("H2M_MAILBOX still hold by MCU. command fail\n"));
                        }
                        return FALSE;
                }
 #ifdef RTMP_MAC_PCI
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
-               H2MMailbox.field.Owner = 1;     // pass ownership to MCU
+               H2MMailbox.field.Owner = 1;     /* pass ownership to MCU */
                H2MMailbox.field.CmdToken = Token;
                H2MMailbox.field.HighByte = Arg1;
                H2MMailbox.field.LowByte = Arg0;
@@ -274,20 +272,20 @@ INT RtmpAsicSendCommandToMcu(IN PRTMP_ADAPTER pAd,
                }
        }
 #ifdef PCIE_PS_SUPPORT
-       // 3090 MCU Wakeup command needs more time to be stable.
-       // Before stable, don't issue other MCU command to prevent from firmware error.
+       /* 3090 MCU Wakeup command needs more time to be stable. */
+       /* Before stable, don't issue other MCU command to prevent from firmware error. */
        if (((IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd))
             && IS_VERSION_AFTER_F(pAd)) && IS_VERSION_AFTER_F(pAd)
            && (pAd->StaCfg.PSControl.field.rt30xxPowerMode == 3)
            && (pAd->StaCfg.PSControl.field.EnableNewPS == TRUE)
            && (Command == WAKE_MCU_CMD)) {
                RTMPusecDelay(2000);
-               //Put this is after RF programming.
-               //NdisAcquireSpinLock(&pAd->McuCmdLock);
-               //pAd->brt30xxBanMcuCmd = FALSE;
-               //NdisReleaseSpinLock(&pAd->McuCmdLock);
+               /*Put this is after RF programming. */
+               /*NdisAcquireSpinLock(&pAd->McuCmdLock); */
+               /*pAd->brt30xxBanMcuCmd = FALSE; */
+               /*NdisReleaseSpinLock(&pAd->McuCmdLock); */
        }
-#endif // PCIE_PS_SUPPORT //
+#endif /* PCIE_PS_SUPPORT // */
 
        return TRUE;
 }
index 9abfe63..d29e6e8 100644 (file)
 #include "../rt_config.h"
 
 BUILD_TIMER_FUNCTION(MlmePeriodicExec);
-//BUILD_TIMER_FUNCTION(MlmeRssiReportExec);
+/*BUILD_TIMER_FUNCTION(MlmeRssiReportExec); */
 BUILD_TIMER_FUNCTION(AsicRxAntEvalTimeout);
 BUILD_TIMER_FUNCTION(APSDPeriodicExec);
 BUILD_TIMER_FUNCTION(AsicRfTuningExec);
 #ifdef RTMP_MAC_USB
 BUILD_TIMER_FUNCTION(BeaconUpdateExec);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
 BUILD_TIMER_FUNCTION(BeaconTimeout);
 BUILD_TIMER_FUNCTION(ScanTimeout);
@@ -61,10 +61,10 @@ BUILD_TIMER_FUNCTION(WpaDisassocApAndBlockAssoc);
 #ifdef RTMP_MAC_PCI
 BUILD_TIMER_FUNCTION(PsPollWakeExec);
 BUILD_TIMER_FUNCTION(RadioOnExec);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 #ifdef RTMP_MAC_USB
 BUILD_TIMER_FUNCTION(RtmpUsbStaAsicForceWakeupTimeout);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
 #if defined(AP_LED) || defined(STA_LED)
 extern void LedCtrlMain(IN PVOID SystemSpecific1,
@@ -97,19 +97,19 @@ static void RtmpTimerQHandle(RTMP_ADAPTER * pAd)
                if (pAd->TimerQ.status == RTMP_TASK_STAT_STOPED)
                        break;
 
-               // event happened.
+               /* event happened. */
                while (pAd->TimerQ.pQHead) {
                        RTMP_INT_LOCK(&pAd->TimerQLock, irqFlag);
                        pEntry = pAd->TimerQ.pQHead;
                        if (pEntry) {
                                pTimer = pEntry->pRaTimer;
 
-                               // update pQHead
+                               /* update pQHead */
                                pAd->TimerQ.pQHead = pEntry->pNext;
                                if (pEntry == pAd->TimerQ.pQTail)
                                        pAd->TimerQ.pQTail = NULL;
 
-                               // return this queue entry to timerQFreeList.
+                               /* return this queue entry to timerQFreeList. */
                                pEntry->pNext = pAd->TimerQ.pQPollFreeList;
                                pAd->TimerQ.pQPollFreeList = pEntry;
                        }
@@ -226,7 +226,7 @@ BOOLEAN RtmpTimerQRemove(IN RTMP_ADAPTER * pAd, IN RALINK_TIMER_STRUCT * pTimer)
                        pNode = pNode->pNext;
                }
 
-               // Now move it to freeList queue.
+               /* Now move it to freeList queue. */
                if (pNode) {
                        if (pNode == pAd->TimerQ.pQHead)
                                pAd->TimerQ.pQHead = pNode->pNext;
@@ -235,7 +235,7 @@ BOOLEAN RtmpTimerQRemove(IN RTMP_ADAPTER * pAd, IN RALINK_TIMER_STRUCT * pTimer)
                        if (pPrev != NULL)
                                pPrev->pNext = pNode->pNext;
 
-                       // return this queue entry to timerQFreeList.
+                       /* return this queue entry to timerQFreeList. */
                        pNode->pNext = pAd->TimerQ.pQPollFreeList;
                        pAd->TimerQ.pQPollFreeList = pNode;
                }
@@ -254,7 +254,7 @@ void RtmpTimerQExit(RTMP_ADAPTER * pAd)
        while (pAd->TimerQ.pQHead) {
                pTimerQ = pAd->TimerQ.pQHead;
                pAd->TimerQ.pQHead = pTimerQ->pNext;
-               // remove the timeQ
+               /* remove the timeQ */
        }
        pAd->TimerQ.pQPollFreeList = NULL;
        os_free_mem(pAd, pAd->TimerQ.pTimerQPoll);
@@ -299,4 +299,4 @@ void RtmpTimerQInit(RTMP_ADAPTER * pAd)
                RTMP_INT_UNLOCK(&pAd->TimerQLock, irqFlags);
        }
 }
-#endif // RTMP_TIMER_TASK_SUPPORT //
+#endif /* RTMP_TIMER_TASK_SUPPORT // */
index 9c2df55..2cc73de 100644 (file)
@@ -45,7 +45,7 @@ DOT11_REGULATORY_INFORMATION USARegulatoryInfo[] = {
        {0, {0, 0, {0}
             }
         }
-       ,                       // Invlid entry
+       ,                       /* Invlid entry */
        {1, {4, 16, {36, 40, 44, 48}
             }
         }
@@ -103,7 +103,7 @@ DOT11_REGULATORY_INFORMATION EuropeRegulatoryInfo[] = {
        {0, {0, 0, {0}
             }
         }
-       ,                       // Invalid entry
+       ,                       /* Invalid entry */
        {1, {4, 20, {36, 40, 44, 48}
             }
         }
@@ -129,7 +129,7 @@ DOT11_REGULATORY_INFORMATION JapanRegulatoryInfo[] = {
        {0, {0, 0, {0}
             }
         }
-       ,                       // Invalid entry
+       ,                       /* Invalid entry */
        {1, {4, 22, {34, 38, 42, 46}
             }
         }
@@ -489,7 +489,7 @@ PMEASURE_REQ_ENTRY MeasureReqInsert(IN PRTMP_ADAPTER pAd, IN UINT8 DialogToken)
                                PMEASURE_REQ_ENTRY pProbeEntry =
                                    pTab->Hash[HashIdx];
 
-                               // update Hash list
+                               /* update Hash list */
                                do {
                                        if (pProbeEntry == pEntry) {
                                                if (pPrevEntry == NULL) {
@@ -529,7 +529,7 @@ PMEASURE_REQ_ENTRY MeasureReqInsert(IN PRTMP_ADAPTER pAd, IN UINT8 DialogToken)
                                 ("%s: pMeasureReqTab tab full.\n", __func__));
                }
 
-               // add this Neighbor entry into HASH table
+               /* add this Neighbor entry into HASH table */
                if (pEntry) {
                        HashIdx = MQ_DIALOGTOKEN_HASH_INDEX(DialogToken);
                        if (pTab->Hash[HashIdx] == NULL) {
@@ -558,7 +558,7 @@ VOID MeasureReqDelete(IN PRTMP_ADAPTER pAd, IN UINT8 DialogToken)
                         ("%s: pMeasureReqTab doesn't exist.\n", __func__));
                return;
        }
-       // if empty, return
+       /* if empty, return */
        if (pTab->Size == 0) {
                DBGPRINT(RT_DEBUG_ERROR, ("pMeasureReqTab empty.\n"));
                return;
@@ -571,7 +571,7 @@ VOID MeasureReqDelete(IN PRTMP_ADAPTER pAd, IN UINT8 DialogToken)
                PMEASURE_REQ_ENTRY pProbeEntry = pTab->Hash[HashIdx];
 
                RTMP_SEM_LOCK(&pAd->CommonCfg.MeasureReqTabLock);
-               // update Hash list
+               /* update Hash list */
                do {
                        if (pProbeEntry == pEntry) {
                                if (pPrevEntry == NULL) {
@@ -687,7 +687,7 @@ static PTPC_REQ_ENTRY TpcReqInsert(IN PRTMP_ADAPTER pAd, IN UINT8 DialogToken)
                                PTPC_REQ_ENTRY pProbeEntry =
                                    pTab->Hash[HashIdx];
 
-                               // update Hash list
+                               /* update Hash list */
                                do {
                                        if (pProbeEntry == pEntry) {
                                                if (pPrevEntry == NULL) {
@@ -726,7 +726,7 @@ static PTPC_REQ_ENTRY TpcReqInsert(IN PRTMP_ADAPTER pAd, IN UINT8 DialogToken)
                                 ("%s: pTpcReqTab tab full.\n", __func__));
                }
 
-               // add this Neighbor entry into HASH table
+               /* add this Neighbor entry into HASH table */
                if (pEntry) {
                        HashIdx = TPC_DIALOGTOKEN_HASH_INDEX(DialogToken);
                        if (pTab->Hash[HashIdx] == NULL) {
@@ -755,7 +755,7 @@ static VOID TpcReqDelete(IN PRTMP_ADAPTER pAd, IN UINT8 DialogToken)
                         ("%s: pTpcReqTab doesn't exist.\n", __func__));
                return;
        }
-       // if empty, return
+       /* if empty, return */
        if (pTab->Size == 0) {
                DBGPRINT(RT_DEBUG_ERROR, ("pTpcReqTab empty.\n"));
                return;
@@ -768,7 +768,7 @@ static VOID TpcReqDelete(IN PRTMP_ADAPTER pAd, IN UINT8 DialogToken)
                PTPC_REQ_ENTRY pProbeEntry = pTab->Hash[HashIdx];
 
                RTMP_SEM_LOCK(&pAd->CommonCfg.TpcReqTabLock);
-               // update Hash list
+               /* update Hash list */
                do {
                        if (pProbeEntry == pEntry) {
                                if (pPrevEntry == NULL) {
@@ -804,7 +804,7 @@ static VOID TpcReqDelete(IN PRTMP_ADAPTER pAd, IN UINT8 DialogToken)
  */
 static UINT64 GetCurrentTimeStamp(IN PRTMP_ADAPTER pAd)
 {
-       // get current time stamp.
+       /* get current time stamp. */
        return 0;
 }
 
@@ -1121,7 +1121,7 @@ VOID MakeMeasurementReqFrame(IN PRTMP_ADAPTER pAd,
        InsertActField(pAd, (pOutBuffer + *pFrameLen), pFrameLen, Category,
                       Action);
 
-       // fill Dialog Token
+       /* fill Dialog Token */
        InsertDialogToken(pAd, (pOutBuffer + *pFrameLen), pFrameLen,
                          MeasureToken);
 
@@ -1132,7 +1132,7 @@ VOID MakeMeasurementReqFrame(IN PRTMP_ADAPTER pAd,
 
                *pFrameLen += TempLen;
        }
-       // prepare Measurement IE.
+       /* prepare Measurement IE. */
        NdisZeroMemory(&MeasureReqIE, sizeof(MEASURE_REQ_INFO));
        MeasureReqIE.Token = MeasureToken;
        MeasureReqIE.ReqMode.word = MeasureReqMode;
@@ -1169,11 +1169,11 @@ VOID EnqueueMeasurementRep(IN PRTMP_ADAPTER pAd,
        HEADER_802_11 ActHdr;
        MEASURE_REPORT_INFO MeasureRepIE;
 
-       // build action frame header.
+       /* build action frame header. */
        MgtMacHeaderInit(pAd, &ActHdr, SUBTYPE_ACTION, 0, pDA,
                         pAd->CurrentAddress);
 
-       NStatus = MlmeAllocateMemory(pAd, (PVOID) & pOutBuffer);        //Get an unused nonpaged memory
+       NStatus = MlmeAllocateMemory(pAd, (PVOID) & pOutBuffer);        /*Get an unused nonpaged memory */
        if (NStatus != NDIS_STATUS_SUCCESS) {
                DBGPRINT(RT_DEBUG_TRACE,
                         ("%s() allocate memory failed \n", __func__));
@@ -1185,10 +1185,10 @@ VOID EnqueueMeasurementRep(IN PRTMP_ADAPTER pAd,
        InsertActField(pAd, (pOutBuffer + FrameLen), &FrameLen,
                       CATEGORY_SPECTRUM, SPEC_MRP);
 
-       // fill Dialog Token
+       /* fill Dialog Token */
        InsertDialogToken(pAd, (pOutBuffer + FrameLen), &FrameLen, DialogToken);
 
-       // prepare Measurement IE.
+       /* prepare Measurement IE. */
        NdisZeroMemory(&MeasureRepIE, sizeof(MEASURE_REPORT_INFO));
        MeasureRepIE.Token = MeasureToken;
        MeasureRepIE.ReportMode = MeasureReqMode;
@@ -1222,11 +1222,11 @@ VOID EnqueueTPCReq(IN PRTMP_ADAPTER pAd, IN PUCHAR pDA, IN UCHAR DialogToken)
 
        HEADER_802_11 ActHdr;
 
-       // build action frame header.
+       /* build action frame header. */
        MgtMacHeaderInit(pAd, &ActHdr, SUBTYPE_ACTION, 0, pDA,
                         pAd->CurrentAddress);
 
-       NStatus = MlmeAllocateMemory(pAd, (PVOID) & pOutBuffer);        //Get an unused nonpaged memory
+       NStatus = MlmeAllocateMemory(pAd, (PVOID) & pOutBuffer);        /*Get an unused nonpaged memory */
        if (NStatus != NDIS_STATUS_SUCCESS) {
                DBGPRINT(RT_DEBUG_TRACE,
                         ("%s() allocate memory failed \n", __func__));
@@ -1238,10 +1238,10 @@ VOID EnqueueTPCReq(IN PRTMP_ADAPTER pAd, IN PUCHAR pDA, IN UCHAR DialogToken)
        InsertActField(pAd, (pOutBuffer + FrameLen), &FrameLen,
                       CATEGORY_SPECTRUM, SPEC_TPCRQ);
 
-       // fill Dialog Token
+       /* fill Dialog Token */
        InsertDialogToken(pAd, (pOutBuffer + FrameLen), &FrameLen, DialogToken);
 
-       // Insert TPC Request IE.
+       /* Insert TPC Request IE. */
        InsertTpcReqIE(pAd, (pOutBuffer + FrameLen), &FrameLen);
 
        MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
@@ -1272,11 +1272,11 @@ VOID EnqueueTPCRep(IN PRTMP_ADAPTER pAd,
 
        HEADER_802_11 ActHdr;
 
-       // build action frame header.
+       /* build action frame header. */
        MgtMacHeaderInit(pAd, &ActHdr, SUBTYPE_ACTION, 0, pDA,
                         pAd->CurrentAddress);
 
-       NStatus = MlmeAllocateMemory(pAd, (PVOID) & pOutBuffer);        //Get an unused nonpaged memory
+       NStatus = MlmeAllocateMemory(pAd, (PVOID) & pOutBuffer);        /*Get an unused nonpaged memory */
        if (NStatus != NDIS_STATUS_SUCCESS) {
                DBGPRINT(RT_DEBUG_TRACE,
                         ("%s() allocate memory failed \n", __func__));
@@ -1288,10 +1288,10 @@ VOID EnqueueTPCRep(IN PRTMP_ADAPTER pAd,
        InsertActField(pAd, (pOutBuffer + FrameLen), &FrameLen,
                       CATEGORY_SPECTRUM, SPEC_TPCRP);
 
-       // fill Dialog Token
+       /* fill Dialog Token */
        InsertDialogToken(pAd, (pOutBuffer + FrameLen), &FrameLen, DialogToken);
 
-       // Insert TPC Request IE.
+       /* Insert TPC Request IE. */
        InsertTpcReportIE(pAd, (pOutBuffer + FrameLen), &FrameLen, TxPwr,
                          LinkMargin);
 
@@ -1324,11 +1324,11 @@ VOID EnqueueChSwAnn(IN PRTMP_ADAPTER pAd,
 
        HEADER_802_11 ActHdr;
 
-       // build action frame header.
+       /* build action frame header. */
        MgtMacHeaderInit(pAd, &ActHdr, SUBTYPE_ACTION, 0, pDA,
                         pAd->CurrentAddress);
 
-       NStatus = MlmeAllocateMemory(pAd, (PVOID) & pOutBuffer);        //Get an unused nonpaged memory
+       NStatus = MlmeAllocateMemory(pAd, (PVOID) & pOutBuffer);        /*Get an unused nonpaged memory */
        if (NStatus != NDIS_STATUS_SUCCESS) {
                DBGPRINT(RT_DEBUG_TRACE,
                         ("%s() allocate memory failed \n", __func__));
@@ -1355,18 +1355,18 @@ static BOOLEAN DfsRequirementCheck(IN PRTMP_ADAPTER pAd, IN UINT8 Channel)
        INT i;
 
        do {
-               // check DFS procedure is running.
-               // make sure DFS procedure won't start twice.
+               /* check DFS procedure is running. */
+               /* make sure DFS procedure won't start twice. */
                if (pAd->CommonCfg.RadarDetect.RDMode != RD_NORMAL_MODE) {
                        Result = FALSE;
                        break;
                }
-               // check the new channel carried from Channel Switch Announcemnet is valid.
+               /* check the new channel carried from Channel Switch Announcemnet is valid. */
                for (i = 0; i < pAd->ChannelListNum; i++) {
                        if ((Channel == pAd->ChannelList[i].Channel)
                            && (pAd->ChannelList[i].RemainingTimeForUse == 0)) {
-                               // found radar signal in the channel. the channel can't use at least for 30 minutes.
-                               pAd->ChannelList[i].RemainingTimeForUse = 1800; //30 min = 1800 sec
+                               /* found radar signal in the channel. the channel can't use at least for 30 minutes. */
+                               pAd->ChannelList[i].RemainingTimeForUse = 1800; /*30 min = 1800 sec */
                                Result = TRUE;
                                break;
                        }
@@ -1385,7 +1385,7 @@ VOID NotifyChSwAnnToPeerAPs(IN PRTMP_ADAPTER pAd,
 static VOID StartDFSProcedure(IN PRTMP_ADAPTER pAd,
                              IN UCHAR Channel, IN UINT8 ChSwMode)
 {
-       // start DFS procedure
+       /* start DFS procedure */
        pAd->CommonCfg.Channel = Channel;
 
        N_ChannelCheck(pAd);
@@ -1425,10 +1425,10 @@ static BOOLEAN PeerChSwAnnSanity(IN PRTMP_ADAPTER pAd,
        BOOLEAN result = FALSE;
        PEID_STRUCT eid_ptr;
 
-       // skip 802.11 header.
+       /* skip 802.11 header. */
        MsgLen -= sizeof(HEADER_802_11);
 
-       // skip category and action code.
+       /* skip category and action code. */
        pFramePtr += 2;
        MsgLen -= 2;
 
@@ -1487,10 +1487,10 @@ static BOOLEAN PeerMeasureReqSanity(IN PRTMP_ADAPTER pAd,
        UINT64 MeasureStartTime;
        UINT16 MeasureDuration;
 
-       // skip 802.11 header.
+       /* skip 802.11 header. */
        MsgLen -= sizeof(HEADER_802_11);
 
-       // skip category and action code.
+       /* skip category and action code. */
        pFramePtr += 2;
        MsgLen -= 2;
 
@@ -1580,10 +1580,10 @@ static BOOLEAN PeerMeasureReportSanity(IN PRTMP_ADAPTER pAd,
        PEID_STRUCT eid_ptr;
        PUCHAR ptr;
 
-       // skip 802.11 header.
+       /* skip 802.11 header. */
        MsgLen -= sizeof(HEADER_802_11);
 
-       // skip category and action code.
+       /* skip category and action code. */
        pFramePtr += 2;
        MsgLen -= 2;
 
@@ -1677,7 +1677,7 @@ static BOOLEAN PeerTpcReqSanity(IN PRTMP_ADAPTER pAd,
 
        MsgLen -= sizeof(HEADER_802_11);
 
-       // skip category and action code.
+       /* skip category and action code. */
        pFramePtr += 2;
        MsgLen -= 2;
 
@@ -1732,7 +1732,7 @@ static BOOLEAN PeerTpcRepSanity(IN PRTMP_ADAPTER pAd,
 
        MsgLen -= sizeof(HEADER_802_11);
 
-       // skip category and action code.
+       /* skip category and action code. */
        pFramePtr += 2;
        MsgLen -= 2;
 
@@ -1808,16 +1808,16 @@ static VOID PeerChSwAnnAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 
                if ((pAd->CommonCfg.bIEEE80211H == 1) && (NewChannel != 0)
                    && (Channel != NewChannel)) {
-                       // Switching to channel 1 can prevent from rescanning the current channel immediately (by auto reconnection).
-                       // In addition, clear the MLME queue and the scan table to discard the RX packets and previous scanning results.
+                       /* Switching to channel 1 can prevent from rescanning the current channel immediately (by auto reconnection). */
+                       /* In addition, clear the MLME queue and the scan table to discard the RX packets and previous scanning results. */
                        AsicSwitchChannel(pAd, 1, FALSE);
                        AsicLockChannel(pAd, 1);
                        LinkDown(pAd, FALSE);
                        MlmeQueueInit(&pAd->Mlme.Queue);
                        BssTableInit(&pAd->ScanTab);
-                       RTMPusecDelay(1000000); // use delay to prevent STA do reassoc
+                       RTMPusecDelay(1000000); /* use delay to prevent STA do reassoc */
 
-                       // channel sanity check
+                       /* channel sanity check */
                        for (index = 0; index < pAd->ChannelListNum; index++) {
                                if (pAd->ChannelList[index].Channel ==
                                    NewChannel) {
@@ -1897,8 +1897,8 @@ static VOID PeerMeasureReportAction(IN PRTMP_ADAPTER pAd,
        UINT8 DialogToken;
        PUINT8 pMeasureReportInfo;
 
-//      if (pAd->CommonCfg.bIEEE80211H != TRUE)
-//              return;
+/*      if (pAd->CommonCfg.bIEEE80211H != TRUE) */
+/*              return; */
 
        if ((pMeasureReportInfo =
             kmalloc(sizeof(MEASURE_RPI_REPORT), GFP_ATOMIC)) == NULL) {
@@ -1916,8 +1916,8 @@ static VOID PeerMeasureReportAction(IN PRTMP_ADAPTER pAd,
                do {
                        PMEASURE_REQ_ENTRY pEntry = NULL;
 
-                       // Not a autonomous measure report.
-                       // check the dialog token field. drop it if the dialog token doesn't match.
+                       /* Not a autonomous measure report. */
+                       /* check the dialog token field. drop it if the dialog token doesn't match. */
                        if ((DialogToken != 0)
                            && ((pEntry = MeasureReqLookUp(pAd, DialogToken)) ==
                                NULL))
@@ -1974,18 +1974,18 @@ static VOID PeerTpcReqAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
        UINT8 LinkMargin = 0;
        CHAR RealRssi;
 
-       // link margin: Ratio of the received signal power to the minimum desired by the station (STA). The
-       //                              STA may incorporate rate information and channel conditions, including interference, into its computation
-       //                              of link margin.
+       /* link margin: Ratio of the received signal power to the minimum desired by the station (STA). The */
+       /*                              STA may incorporate rate information and channel conditions, including interference, into its computation */
+       /*                              of link margin. */
 
        RealRssi = RTMPMaxRssi(pAd, ConvertToRssi(pAd, Elem->Rssi0, RSSI_0),
                               ConvertToRssi(pAd, Elem->Rssi1, RSSI_1),
                               ConvertToRssi(pAd, Elem->Rssi2, RSSI_2));
 
-       // skip Category and action code.
+       /* skip Category and action code. */
        pFramePtr += 2;
 
-       // Dialog token.
+       /* Dialog token. */
        NdisMoveMemory(&DialogToken, pFramePtr, 1);
 
        LinkMargin = (RealRssi / MIN_RCV_PWR);
@@ -2050,8 +2050,8 @@ VOID PeerSpectrumAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 
        switch (Action) {
        case SPEC_MRQ:
-               // current rt2860 unable do such measure specified in Measurement Request.
-               // reject all measurement request.
+               /* current rt2860 unable do such measure specified in Measurement Request. */
+               /* reject all measurement request. */
                PeerMeasureReqAction(pAd, Elem);
                break;
 
@@ -2104,7 +2104,7 @@ INT Set_MeasureReq_Proc(IN PRTMP_ADAPTER pAd, IN PSTRING arg)
        NDIS_STATUS NStatus;
        ULONG FrameLen;
 
-       NStatus = MlmeAllocateMemory(pAd, (PVOID) & pOutBuffer);        //Get an unused nonpaged memory
+       NStatus = MlmeAllocateMemory(pAd, (PVOID) & pOutBuffer);        /*Get an unused nonpaged memory */
        if (NStatus != NDIS_STATUS_SUCCESS) {
                DBGPRINT(RT_DEBUG_TRACE,
                         ("%s() allocate memory failed \n", __func__));
@@ -2114,11 +2114,11 @@ INT Set_MeasureReq_Proc(IN PRTMP_ADAPTER pAd, IN PSTRING arg)
        ArgIdx = 1;
        while ((thisChar = strsep((char **)&arg, "-")) != NULL) {
                switch (ArgIdx) {
-               case 1: // Aid.
+               case 1: /* Aid. */
                        Aid = (UINT8) simple_strtol(thisChar, 0, 16);
                        break;
 
-               case 2: // Measurement Request Type.
+               case 2: /* Measurement Request Type. */
                        MeasureReqType = simple_strtol(thisChar, 0, 16);
                        if (MeasureReqType > 3) {
                                DBGPRINT(RT_DEBUG_ERROR,
@@ -2128,7 +2128,7 @@ INT Set_MeasureReq_Proc(IN PRTMP_ADAPTER pAd, IN PSTRING arg)
                        }
                        break;
 
-               case 3: // Measurement channel.
+               case 3: /* Measurement channel. */
                        MeasureCh = (UINT8) simple_strtol(thisChar, 0, 16);
                        break;
                }
@@ -2149,7 +2149,7 @@ INT Set_MeasureReq_Proc(IN PRTMP_ADAPTER pAd, IN PSTRING arg)
 
        MeasureReqInsert(pAd, MeasureReqToken);
 
-       // build action frame header.
+       /* build action frame header. */
        MgtMacHeaderInit(pAd, &ActHdr, SUBTYPE_ACTION, 0,
                         pAd->MacTab.Content[Aid].Addr, pAd->CurrentAddress);